Cu-Catalyzed Click Reaction in Carbohydrate Chemistry

Synthesis of (E)-2-(1H-tetrazole-5-yl)-3-phenylacrylenenitrile derivatives catalyzed by new ZnO nanoparticles embedded in a thermally stable magnetic periodic mesoporous organosilica under green conditions

ZnO nanoparticles embedded in a magnetic isocyanurate-based periodic mesoporous organosilica (Fe3O4@PMO-ICS-ZnO) were prepared through a modified environmentally-benign procedure for the first time and properly characterized by appropriate spectroscopic and analytical methods or techniques used for mesoporous materials. The new thermally stable Fe3O4@PMO-ICS-ZnO nanomaterial with proper active sites and surface area as well as uniform particle size was investigated for the synthesis of medicinally important tetrazole derivatives through cascade condensation and concerted 1,3-cycloaddition reactions as a representative of the Click Chemistry concept. The desired 5-substituted-1H-tetrazole derivatives were smoothly prepared in high to quantitative yields and good purity in EtOH under reflux conditions. Low catalyst loading, short reaction time and the use of green solvents such as EtOH and water instead of carcinogenic DMF as well as easy separation and recyclability of the catalyst for at least five consecutive runs without significant loss of its activity are notable advantages of this new protocol compared to other recent introduced procedures.

Synthesis of Xylan-Click-Quaternized Chitosan via Click Chemistry and Its Application in the Preparation of Nanometal Materials

For the high-valued utilization of hemicelluloses and for realizing the controllable synthesis of NPs, this paper's aim is to combine xylan, chitosan and nanometal materials at the same time. In this research study, firstly, propargyl xylan was synthesized via nucleophilic substitution reaction between xylan and propargyl bromide in NaOH solution. On the other hand, a tosyl group was introduced onto the 6th position of synthesized quaternized chitosan (QCS), and the azide group replaced the tosyl group to obtain 6-amido-QCS (QCS-N3). The synthesis conditions of the above reactions were optimized. Subsequently, the novel xylan-click-QCS polymer was obtained via click reaction between terminal alkyne groups on the xylan chains and azide groups on QCS. Then, AgNPs and AuNPs were synthesized by adopting the xylan-click-QCS polymer as the reducing and stabilizing agent, and the reaction conditions were optimized to obtain well-dispersed and highly stable nanoparticles. There were two kinds of Ag nanomaterials, with diameters of 10~20 nm and 2~5 nm, respectively, indicating the formation of Ag nanoclusters, except for Ag nanoparticles, in this reaction. The diameter of the synthesized AuNPs was 20~30 nm, which possessed a more uniform size distribution. The Ag nanoclusters with a smaller size (2~5 nm) could inhibit MCF-7 cell proliferation effectively, indicating their application potential in cancer therapy. The study gives a new approach to the high-value utilization of biopolymers.

Emerging impact of triazoles as anti-tubercular agent

Tuberculosis, a disease of poverty is a communicable infection with a reasonably high mortality rate worldwide. 10 Million new cases of TB were reported with approx 1.4 million deaths in the year 2019. Due to the growing number of drug-sensitive and drug-resistant tuberculosis cases, there is a vital need to develop new and effective candidates useful to combat this deadly disease. Despite tremendous efforts to identify a mechanism-based novel antitubercular agent, only a few have entered into clinical trials in the last six decades. In recent years, triazoles have been well explored as the most valuable scaffolds in drug discovery and development. Triazole framework possesses favorable properties like hydrogen bonding, moderate dipole moment, enhanced water solubility, and also the ability to bind effectively with biomolecular targets of M. tuberculosis and therefore this scaffold displayed excellent potency against TB. This review is an endeavor to summarize an up-to-date innovation of triazole-appended hybrids during the last 10 years having potential in vitro and in vivo antitubercular activity with structure activity relationship analysis. This review may help medicinal chemists to explore the triazole scaffolds for the rational design of potent drug candidates having better efficacy, improved selectivity and minimal toxicity so that these hybrid NCEs can effectively be explored as potential lead to fight against M. tuberculosis.

1,2-Dialkynyldiboranes(4): B-B versus CC bond reactivity

The reactivity of three 1,2-dialkynyl-1,2-diaminodiborane(4) derivatives, B₂(NMe₂)₂(CCR)₂ (R = H, Me, SiMe₃), towards small molecules known to react with both B-B and CC bonds was studied. With arylazides nitrene insertion into the B-B bond with concomitant loss of N₂ was kinetically favoured in all cases. While reactions with sterically unhindered hydroboranes proceeded unselectively, sterically encumbered dimesitylborane cleanly added to both alkynyl moieties, resulting in the first examples of 1,2-divinyldiboranes(4). In the presence of catalytic amounts of Pd/C room-temperature hydrogenation at 1 bar led to oxidative B-B bond cleavage and yielded the fully hydrogenated alkyl(amino)hydroborane products. These could be prevented from dimerising and isolated by complexation with an NHC ligand. Finally, stepwise halogenation of the B-B bond and the alkynyl groups afforded first the corresponding alkynyl(amino)haloboranes and then the amino(halo)(1,2-dihalovinyl)boranes.

Enantioselective Rh-Catalyzed Azide-Internal-Alkyne Cycloaddition for the Construction of Axially Chiral 1,2,3-Triazoles

Significant advances have been achieved for the construction of chiral skeletons containing 1,2,3-triazoles via transition-metal-catalyzed asymmetric azide-alkyne cycloaddition; however, most of them have been limited to terminal alkynes in the synthesis of central chirality via desymmetrization and dynamic/dynamic kinetic resolution. Enantioselective transition-metal-catalyzed azide-internal-alkyne cycloaddition is extremely limited. Moreover, the construction of a challenging five-membered (hetero)biaryl axially chiral molecule via transition-metal-catalyzed asymmetric azide-internal-alkyne cycloaddition is still underexplored. Herein, we first report an atroposelective and atom-economical synthesis of axially chiral 1,4,5-trisubstituted 1,2,3-triazoles, directly acting as core chiral units of challenging five-membered atropisomers, via the enantioselective Rh-catalyzed azide-alkyne cycloaddition (E-RhAAC) of internal alkynes and azides. The reaction demonstrates excellent functional group tolerance, forging a variety of C-C axially chiral 1,2,3-triazoles under mild conditions with moderate to excellent yields (up to 99% yield) and generally high to excellent enantioselectivities (up to 99% ee) along with specific regiocontrol. The origin of regio- and enantioselectivity control is disclosed by density functional theory (DFT) calculations, providing new guidance for the facile construction of axially chiral compounds.

Bodipy-carbohydrate systems: synthesis and bio-applications

Luminescent BODIPY-sugar probes have stimulated the attention of researchers for the potential applications of such molecular systems in bio-imaging. The presence of carbohydrate units confers unique structural and biological features, beside enhancement of water solubility and polarity. On the other hand, BODIPY (BOronDiPYrromethene) derivatives represent eclectic and functional luminescent molecules because of their outstanding photophysical properties. This article provides a review on the synthesis and applications of BODIPY-linked glycosyl probes in which the labelling of complex carbohydrates with BODIPY allowed the disclosing of their in vivo behaviour or where the sugar constitutes a recognition element for specific targeting probes, or, finally, in which the stereochemical characteristics of the carbohydrate hydroxyl groups play as structural elements for assembling more than one photoactive subunit, resulting in functional supramolecular molecules with modulable properties. We describe the methods we have used to construct various multiBODIPY molecular systems capable of functioning as artificial antennas exhibiting extremely efficient and fast photo-induced energy transfer. Some of these systems have been designed to allow the modulation of energy transfer efficiency and emission color, and intensity dependent on their position within a biological matrix. Finally, future perspectives for such BODIPY-based functional supramolecular sugar systems are also highlighted.

New Acetamidine Cu(II) Schiff base complex supported on magnetic nanoparticles pectin for the synthesis of triazoles using click chemistry

In this project, the new catalyst copper defines as Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was successfully manufactured and fully characterized by different techniques, including FT-IR, XRD, TEM, FESEM, EDX, VSM, TGA, and ICP analysis. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. One of the most important properties of a catalyst is the ability to be prepared from simple materials such as pectin that's a biopolymer that is widely found in nature. The catalytic activity of Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was examined in a classical, one pot, and the three-component reaction of terminal alkynes, alkyl halides, and sodium azide in water and observed, proceeding smoothly and completed in good yields and high regioselectivity. The critical potential interests of the present method include high yields, recyclability of catalyst, easy workup, using an eco-friendly solvent, and the ability to sustain a variety of functional groups, which give economical as well as ecological rewards. The capability of the nanocomposite was compared with previous works, and the nanocomposite was found more efficient, economical, and reproducible. Also, the catalyst can be easily removed from the reaction solution using an external magnet and reused for five runs without reduction in catalyst activity.

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

Sialic acid is the natural substrate for sialidases and its chemical modification has been a useful approach to generate potent and selective inhibitors. Aiming at advancing the discovery of selective Trypanosoma cruzi trans-sialidase (TcTS) inhibitors, we have synthesised a small series of anomeric 1,2,3-triazole-linked sialic acid derivatives in good yields and high purity via copper-catalysed azide-alkyne cycloaddition (CuAAC, click chemistry) and evaluated their activity towards TcTS and neuraminidase. Surprisingly, the compounds showed practically no TcTS inhibition, whereas ca. 70% inhibition was observed for neuraminidase in relation to the analogues bearing hydrophobic substituents and ca. 5% for more polar substituents. These results suggest that polarity changes are less tolerated by neuraminidase due to the big difference in impact of hydrophobicity upon inhibition, thus indicating a simple approach to differentiate both enzymes. Moreover, such selectivity might be reasoned based on a possible steric hindrance caused by a bulky hydrophobic loop that sits over the TcTS active site and may prevent the hydrophobic inhibitors from binding. The present study is a step forward in exploiting subtle structural differences in sialidases that need to be addressed in order to achieve selective inhibition.

Protein nanowires with tunable functionality and programmable self-assembly using sequence-controlled synthesis

Advances in synthetic biology permit the genetic encoding of synthetic chemistries at monomeric precision, enabling the synthesis of programmable proteins with tunable properties. Bacterial pili serve as an attractive biomaterial for the development of engineered protein materials due to their ability to self-assemble into mechanically robust filaments. However, most biomaterials lack electronic functionality and atomic structures of putative conductive proteins are not known. Here, we engineer high electronic conductivity in pili produced by a genomically-recoded E. coli strain. Incorporation of tryptophan into pili increased conductivity of individual filaments >80-fold. Computationally-guided ordering of the pili into nanostructures increased conductivity 5-fold compared to unordered pili networks. Site-specific conjugation of pili with gold nanoparticles, facilitated by incorporating the nonstandard amino acid propargyloxy-phenylalanine, increased filament conductivity ~170-fold. This work demonstrates the sequence-defined production of highly-conductive protein nanowires and hybrid organic-inorganic biomaterials with genetically-programmable electronic functionalities not accessible in nature or through chemical-based synthesis.

Bacterial hairs called pili become highly-conductive electric wires upon addition of both natural and synthetic amino acids conjugated with gold nanoparticles. Here the authors use computationally-guided ordering further increasing their conductivity, thus yielding genetically-programmable materials.

Synthesis and Reactivity of Cyclic Oxonium Derivatives of nido-Carborane: A Review

Nucleophilic ring-opening reactions of cyclic oxonium derivatives of anionic boron hydrides are a convenient method of their modification which opens practically unlimited prospects for their incorporation into various macro- and biomolecules. This contribution provides an overview of the synthesis and reactivity of cyclic oxonium derivatives of nido-carborane as well as half-sandwich complexes based on it.

Synthesis and Preliminary Evaluation of the Cytotoxicity of Potential Metabolites of Quinoline Glycoconjugates

The design of prodrugs is one of the important strategies for selective anti-cancer therapies. When designing prodrugs, attention is paid to the possibility of their targeting tumor-specific markers such as proteins responsible for glucose uptake. That is why glycoconjugation of biologically active compounds is a frequently used strategy. Glycoconjugates consisting of three basic building blocks: a sugar unit, a linker containing a 1,2,3-triazole ring, and an 8-hydroxyquinoline fragment was described earlier. It is not known whether their cytotoxicity is due to whole glycoconjugates action or their metabolites. To check the biological activity of products that can be released from glycoconjugates under the action of hydrolytic enzymes, the synthetically obtained potential metabolites were tested in vitro for the inhibition of proliferation of HCT-116, MCF-7, and NHDF-Neo cell lines using the MTT assay. Research shows that for the full activity of glycoconjugates, the presence of all three building blocks in the structure of a potential drug is necessary. For selected derivatives, additional tests of targeted drug delivery to tumor cells were carried out using polymer nanocarriers in which they are encapsulated. This approach significantly lowered the determined IC₅₀ values of the tested compounds and improved their selectivity and effectiveness.

Ag2O-mediated Tandem Reaction between Terminal Alkyne and o-Iodibenzoic Acid: Construction of 3-Ethylideneisobenzofuran-1(3H)-ones

Taking aryl propargyl ether and o-iodibenzoic acid as substrates, a series of aryl cyclolactones bearing an exocyclized C=C bond were constructed with moderate to good yields. Diverse substituent groups could be tolerant in the reaction, which indicated excellent compatibility of the reaction. In this tandem reaction, Ag2O was employed as the media and Et3N was screened as the base to facilitate the reaction. A concise mechanism was proposed on the basis of the expansion of the substrates and theoretical analysis. Sonogashira type coupling coupled with intramolecular nucleophilic addition in one pot to construct the product, 3-ethylideneisobenzofuran-1(3H)-one.

Inverting Conventional Chemoselectivity in the Sonogashira Coupling Reaction of Polyhalogenated Aryl Triflates with TMS-Arylalkynes

A newly developed phosphine ligand with a C2-cyclohexyl group on the indole ring was successfully applied in a chemoselective Sonogashira coupling reaction with excellent chemoselectivity, affording an inversion of the conventional chemoselectivity order of C-Br > C-Cl > C-OTf. This study also provided an efficient approach to the synthesis of polycyclic aromatic hydrocarbons (PAHs) and the natural product analogue trimethyl-selaginellin L by merging of chemoselective Sonogashira and Suzuki-Miyaura coupling reactions.

The Role of Triazole and Glucose Moieties in Alkali Metal Cation Complexation by Lower-Rim Tertiary-Amide Calix[4]arene Derivatives

The binding of alkali metal cations with two tertiary-amide lower-rim calix[4]arenes was studied in methanol, N,N-dimethylformamide, and acetonitrile in order to explore the role of triazole and glucose functionalities in the coordination reactions. The standard thermodynamic complexation parameters were determined microcalorimetrically and spectrophotometrically. On the basis of receptor dissolution enthalpies and the literature data, the enthalpies for transfer of reactants and products between the solvents were calculated. The solvent inclusion within a calixarene hydrophobic basket was explored by means of ¹H NMR spectroscopy. Classical molecular dynamics of the calixarene ligands and their complexes were carried out as well. The affinity of receptors for cations in methanol and N,N-dimethylformamide was quite similar, irrespective of whether they contained glucose subunits or not. This indicated that sugar moieties did not participate or influence the cation binding. All studied reactions were enthalpically controlled. The peak affinity of receptors for sodium cation was noticed in all complexation media. The complex stabilities were the highest in acetonitrile, followed by methanol and N,N-dimethylformamide. The solubilities of receptors were greatly affected by the presence of sugar subunits. The medium effect on the affinities of calixarene derivatives towards cations was thoroughly discussed regarding the structural properties and solvation abilities of the investigated solvents.

Copper(I)-Catalyzed Direct Oxidative Annulation of 1,3-Dicarbonyl Compounds with Maleimides: Access to Polysubstituted Dihydrofuran Derivatives

An efficient annulation method for the synthesis of polysubstituted dihydrofurans from 1,3-dicarbonyl compounds and maleimides is described. The reactions can afford furo[2,3-c]pyrrole derivatives with satisfactory yields. The developed strategy realizes the direct oxidative double C(sp³)-H functionalization in the presence of copper(I) salts and 2-(tert-butylperoxy)-2-methylpropane. Meanwhile, this protocol features a mild reaction condition and simple catalytic system. A reaction mechanism involving a single electron oxidation is also proposed.

A Recent Overview of 1,2,3-Triazole-Containing Hybrids as Novel Antifungal Agents: Focusing on Synthesis, Mechanism of Action, and Structure-Activity Relationship (SAR)

A pharmacophore system has been found as 1,2,3-triazole, a five-membered heterocycle ring with nitrogen heteroatoms. These heterocyclic compounds can be produced using azide-alkyne cycloaddition processes catalyzed by ruthenium or copper. The bioactive compounds demonstrated antitubercular, antibacterial, anti-inflammatory, anticancer, antioxidant, antiviral, and antidiabetic properties. This heterocycle molecule, in particular, with one or more 1,2,3-triazole cores has been found to have the most powerful antifungal effects. The goal of this review is to highlight recent developments in the synthesis and structure-activity relationship (SAR) investigation of this prospective fungicidal chemical. Also there have been explained drugs and mechanism of action of a triazole compound with antifungal activity. This review will be useful in a variety of fields, including medicinal chemistry, organic chemistry, mycology, and pharmacology.

1,6-Addition of 1,2,3-NH triazoles to para-quinone methides: Facile access to highly selective N1 and N2 substituted triazoles

The regioselective syntheses of N¹ and N² substituted triazoles through a 1,6-addition reaction of 1,2,3-NH triazoles to p-quinone methide were achieved under mild reaction conditions. The present reactions showed superior results in terms of selectivity, mild reaction conditions, short reaction time and broad substrate scope with good functional-group compatibility. Considering the high synthetic value of N¹- and N²-substituted compounds and p-QM related research, the present strategy will greatly benefit researchers in various fields.

Copper-Catalyzed Ultrasonic-Promoted Coupling of Acetylene Analogs, Dialkyl azo dicarboxylate, and Benzazoles to Assemble Tricyclic Fused- Ring [1,2,3]triazolo[3,4-b][1,3]benzazole Analogs

:

An unprecedented copper-catalyzed reaction of acetylene analogs with dialkyl azo dicarboxylate and benzazole analogs via a cross-coupling sequence was reported. A library of triazolobenzazole fused ring systems including [1,2,3] triazolo [3,4-b] [1,3] benzothiazole, [1,2,3] triazolo [3,4-b] [1,3] benzoxazole and [1,2,3] triazolo[3,4-b][1,3]benzimidazole structures were obtained in moderate to excellent yields under very mild reaction conditions. Structural confirmation of the final products became possible using different methods like spectroscopy and elemental analysis. The control experiments indicated C-H activation of acetylene by copper salts, followed by cycloaddition between a 2-(phenylethynyl)benzo[d]azol-3(2H)-yl anion and azo dicarboxylate as the key mechanistic feature. The broad substrate scope with simple and easily affordable starting materials, as well as mild reaction conditions are the noticeable attributes of this methodology, which provides facile access to the desired products.

Silver-mediated annulation between 5-H-1,2,3-thiadiazoles and 1,3-dicarbonyl compounds to construct polysubstituted furans

An efficient synthesis of polysubstituted furans by Ag(i)-mediated annulation between 5-H-1,2,3-thiadiazoles and 1,3-dicarbonyl compounds is reported.

Synthesis and structural features of a series of Cu(i) furan-2-thiocarboxylate complexes: efficient “click” catalysts for the synthesis of glycoconjugates and glycocluster

A series of phosphinecopper(i) thiocarboxylates have been synthesized and characterized structurally. These complexes act as efficient catalysts for the 'click' azide–alkyne cycloaddition leading to glycoconjugates and a glycocluster.

Readily accessible azido-alkyne-functionalized monomers for the synthesis of cyclodextrin analogues using click chemistry

A set of linear and cyclic oligomers were synthesized starting from a suitable azido-alkyne monomer through click oligomerization. The synthesis of these monomers starting from bromobenzene features an enzymatic dihydroxylation...

The disulfide bond as a key motif for the construction of multivalent glycoclusters

S-Glycosylated dendrons having a thioacetate group in their focal points led to multivalent glycoclusters by spontaneous O2-oxidation of sulfides.

Development of sustainable synthesis of glucuronic acid glycodendrimers using ball milling and microwave-assisted CuAAC reaction

Two green strategies for CuAAC reaction based on two activation pathways, solvent free mechanochemistry and microwave irradiation using a recycable biosolvent, are reported for the synthesis of glucuronic acid glycodendrimers with good conversión.

Synthesis, biological evaluation and induced fit docking simulation study of d-glucose-conjugated 1H-1,2,3-triazoles having 4H-pyrano[2,3-d]pyrimidine ring as potential agents against bacteria and fungi

Gluco-conjugated 1H-1,2,3-triazoles having 4H-pyrano[2,3-d]pyrimidines are synthesized via click chemistry of N-propargyl-4H-pyrano[2,3-d]pyrimidines and glucopyaranosyl azide using CuI@Montmorillonite. Their antibacterial, anti-MRSA, and antifungal activity is probed.

Organocatalytic asymmetric synthesis of quaternary α-isoxazole–α-alkynyl amino acid derivatives

Chiral phosphoric acid catalyzed enantioselective addition of 5-amino-isoxazoles with β,γ-alkynyl-α-ketimino esters provided good yields and excellent enantioselectivities.

Relaxed Substrate Specificity in Qβ Replicase through Long-Term In Vitro Evolution

A change from RNA- to DNA-based genetic systems is hypothesized as a major transition in the evolution of early life forms. One of the possible requirements for this transition is a change in the substrate specificity of the replication enzyme. It is largely unknown how such changes would have occurred during early evolutionary history. In this study, we present evidence that an RNA replication enzyme that has evolved in the absence of deoxyribonucleotide triphosphates (dNTPs) relaxes its substrate specificity and incorporates labeled dNTPs. This result implies that ancient replication enzymes, which probably evolved in the absence of dNTPs, could have incorporated dNTPs to synthesize DNA soon after dNTPs became available. The transition from RNA to DNA, therefore, might have been easier than previously thought.

A general strategy to the intracellular sensing of glycosidases using AIE-based glycoclusters

Glycosidases, which are the enzymes responsible for the removal of residual monosaccharides from glycoconjugates, are involved in many different biological and pathological events. The ability to detect sensitively the activity and spatiotemporal distribution of glycosidases in cells will provide useful tools for disease diagnosis. However, the currently developed fluorogenic probes for glycosidases are generally based on the glycosylation of the phenol group of a donor-acceptor type fluorogen. This molecular scaffold has potential drawbacks in terms of substrate scope, sensitivity because of aggregation-caused quenching (ACQ), and the inability for long-term cell tracking. Here, we developed glycoclusters characterized by aggregation-induced emission (AIE) properties as a general platform for the sensing of a variety of glycosidases. To overcome the low chemical reactivity associated with phenol glycosylation, here we developed an AIE-based scaffold, which is composed of tetraphenylethylene conjugated with dicyanomethylene-4H-pyran (TPE-DCM) with a red fluorescence emission. Subsequently, a pair of dendritic linkages was introduced to both sides of the fluorophore, to which six copies of monosaccharides (d-glucose, d-galactose or l-fucose) were introduced through azide-alkyne click chemistry. The resulting AIE-active glycoclusters were shown to be capable of (1) fluorogenic sensing of a diverse range of glycosidases including β-d-galactosidase, β-d-glucosidase and α-l-fucosidase through the AIE mechanism, (2) fluorescence imaging of the endogenous glycosidase activities in healthy and cancer cells, and during cell senescence, and (3) glycosidase-activated, long-term imaging of cells. The present study provides a general strategy to the functional, in situ imaging of glycosidase activities through the multivalent display of sugar epitopes of interest onto properly designed AIE-active fluorogens.

Local Cross-Coupling Activity of Azide-Hexa(ethylene glycol)-Terminated Self-Assembled Monolayers Investigated by Atomic Force Microscopy

Azide-oligo(ethylene glycol)-terminated self-assembled monolayers (N₃-OEG-SAMs) are promising interfacial structures for surface functionalization. Its many potential applications include chemical/bio-sensing and construction of surface models owing to its cross-coupling activity that originates from the azide group and oligo(ethylene glycol) (OEG) units for non-specific adsorption resistance. However, there are only a few studies and limited information, particularly on the molecular-scale structures and local cross-coupling activities of N₃-OEG-SAMs, which are vital to understanding its surface properties and interfacial molecular design. In this study, molecular-scale surface structures and cross-coupling activity of azide-hexa(ethylene glycol)-terminated SAMs (N₃-EG₆-SAMs) were investigated using frequency modulation atomic force microscopy (FM-AFM) in liquid. The N₃-EG₆-SAMs were prepared on Au(111) substrates through the self-assembly of 11-azido-hexa(ethylene glycol)-undecane-1-thiol (N₃-EG₆-C₁₁-HS) molecules obtained from a liquid phase. Subnanometer-resolution surface structures were visualized in an aqueous solution using a laboratory-built FM-AFM instrument. The results show a well-ordered molecular arrangement in the N₃-EG₆-SAM and its clean surfaces originating from the adsorption resistance property of the terminal EG₆ units. Surface functionalization by the cross-coupling reaction of copper(I)-catalyzed azide-alkyne cycloaddition was observed, indicating a structural change in the form of fluctuating structures and island-shaped structures depending on the concentration of the alkyne molecules. The FM-AFM imaging enabled to provide information on the relationship between the surface structures and cross-coupling activity. These findings provide molecular-scale information on the functionalization of the N₃-EG₆-SAMs, which is helpful for the interfacial molecular design based on alkanethiol SAMs in many applications.

Tetranuclear and trinuclear copper(I) pyrazolates as catalysts in copper mediated azide-alkyne cycloadditions (CuAAC)

Homoleptic, tetranuclear copper(I) pyrazolates {[3,5-(t-Bu)₂Pz]Cu}₄, {[3-(CF₃)-5-(t-Bu)Pz]Cu}₄, and {[4-Br-3,5-(i-Pr)₂Pz]Cu}₄ are excellent stand-alone catalysts for azide-alkyne cycloaddition reactions (CuAAC). This work demonstrates that a range of pyrazolates, including those with electron donating and electron-withdrawing groups to sterically demanding substituents on the pyrazolyl backbones, can serve as effective ligand supports on tetranuclear copper catalysts. However, in contrast to the tetramers and also highly fluorinated {[3,5-(CF₃)₂Pz]Cu}₃, trinuclear copper(I) complexes such as {[3,5-(i-Pr)₂Pz]Cu}₃ and {[3-(CF₃)-5-(CH₃)Pz]Cu}₃ supported by relatively electron rich pyrazolates display poor catalytic activity in CuAAC. The behavior and degree of aggregation of several of these copper(I) pyrazolates in solution were examined using vapor pressure osmometry. Copper(I) complexes such as {[3,5-(CF₃)₂Pz]Cu}₃ and {[3-(CF₃)-5-(t-Bu)Pz]Cu}₄ with electron withdrawing pyrazolates were found to break up in solution to different degrees producing smaller aggregates while those such as {[3,5-(i-Pr)₂Pz]Cu}₃ and {[3,5-(t-Bu)₂Pz]Cu}₄ with electron rich pyrazolates remain intact. In addition, kinetic experiments were performed to understand the unusual activity of tetranuclear copper(I) pyrazolate systems.

Glycosyl Triazole Ligand for Temperature-Dependent Competitive Reactions of Cu-Catalyzed Sonogashira Coupling and Glaser Coupling

Glycosyl triazoles have been introduced as efficient ligands for the Cu-catalyzed Sonogashira reaction to overcome the challenges of sideways homocoupling reactions in Cu catalysis in this reaction. The atmospheric oxygen in a sealed tube did not affect the coupling, and no need of complete exclusion of oxygen was experienced in the presence of glycohybrid triazole ligand L3. High product yields were obtained at 130 °C for a variety of substrates including aliphatic and aromatic terminal alkynes and differently substituted aromatic halides including 9-bromo noscapine. In contrast, at room temperature, a very low loading of the L3-Cu catalytic system could produce excellent yields in Glaser coupling including homocoupling and heterocoupling of a variety of aliphatic and aromatic alkynes.

Click chemistry inspired synthesis of andrographolide triazolyl conjugates for effective fluorescent sensing of ferric ions

The naturally occurring compound andrographolide 1 was used as a substrate for the synthesis of a novel terminal alkyne 3 which on copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction with azides 4a-l, 7 and 9 furnished a series of regioselective andrographolide triazolyl conjugates 5a-l, 8 and 10, respectively. A free glycoconjugate 6 was also prepared by selective deprotection of compound 5i in good yield. All the compounds were characterized by absorbance, FT-IR, NMR, and HR-MS analyses. The triazolyl conjugate 8 was further investigated as a probe for selective detection of Fe³⁺ ion in matrix. The mode of attachment of Fe³⁺ ion to the compound 8 was established by absorbance, fluorescence, infrared (IR), and nuclear magnetic resonance (NMR) spectroscopy, and high resolution mass-spectrometry (HR-MS). The logic gate circuits were constructed for the probe 8 and ethylenediaminetetraacetic acid (EDTA). The environmental perspective of probe 8 was investigated in real water samples.

Spatiotemporal Dynamic Assembly/Disassembly of Organelle-Mimics Based on Intrinsically Disordered Protein-Polymer Conjugates

Design of reversible organelle-like microcompartments formed by liquid-liquid phase separation in cell-mimicking entities has significantly advanced the bottom-up construction of artificial eukaryotic cells. However, organizing the formation of artificial organelle architectures in a spatiotemporal manner within complex primitive compartments remains scarcely explored. In this work, thermoresponsive hybrid polypeptide-polymer conjugates are rationally engineered and synthesized, resulting from the conjugation of an intrinsically disordered synthetic protein (IDP), namely elastin-like polypeptide, and synthetic polymers (poly(ethylene glycol) and dextran) that are widely used as macromolecular crowding agents. Cell-like constructs are built using droplet-based microfluidics that are filled with such bioconjugates and an artificial cytoplasm system that is composed of specific polymers conjugated to the IDP. The distinct spatial organizations of two polypeptide-polymer conjugates and the dynamic assembly and disassembly of polypeptide-polymer coacervate droplets in response to temperature are studied in the cytomimetic protocells. Furthermore, a monoblock IDP with longer length is concurrently included with bioconjugates individually inside cytomimetic compartments. Both bioconjugates exhibit an identical surfactant-like property, compartmentalizing the monoblock IDP coacervates via temperature control. These findings lay the foundation for developing hierarchically structured synthetic cells with interior organelle-like structures which could be designed to localize in desired phase-separated subcompartments.

Click ferrocenyl-erlotinib conjugates active against erlotinib-resistant non-small cell lung cancer cells in vitro

Thanks to development of erlotinib and other target therapy drugs the lung cancer treatment have improved a lot in recent years. However, erlotinib-resistant lung cancer remains an unsolved clinical problem which demands for new therapeutics to be developed. Herein we report the synthesis of a library of 1,4- and 1,5-triazole ferrocenyl derivatives of erlotinib together with their anticancer activity studies against erlotinib-sensitive A549 and H1395 as well as erlotinib-resistant H1650 and H1975 cells. Studies showed that extend of anticancer activity is mainly related to the length of the spacer between the triazole and the ferrocenyl entity. Among the series of investigated compounds two isomers commonly bearing C(O)CH₂CH₂ spacer have shown superior to erlotinib activity against erlotinib-resistant H1650 and H1975 cells whereas compound with short methylene spacer devoid of any activity. In-depth biological studies for the most active compound showed differences in its mechanism of action in compare to erlotinib. The latter is known EGFR inhibitor whereas their ferrocenyl congener exerts anticancer activity mainly as ROS-inducer which activates mitochondrial pathway of apoptosis in cancer cells. However, docking studies suggested that the most active compound can also binds to the active site of EGFR TK in a similar way as erlotinib.

Click-Chemistry-Based Free Azide versus Azido Sugar Detection Enables Rapid In Vivo Screening of Glycosynthase Activity

Engineering of carbohydrate-active enzymes such as glycosynthases to enable chemoenzymatic synthesis of bespoke oligosaccharides has been limited by the lack of suitable ultrahigh-throughput screening methods capable of robustly detecting either starting substrates or end-products of the glycosidic bond formation reaction. Currently, there are limited screening methods available for rapid and highly sensitive single-cell-based screening of glycosynthase enzymes employing azido sugars as activated donor glycosyl substrates. Here, we report a fluorescence-based approach employing click-chemistry for the selective detection of glycosyl azides as substrates versus free inorganic azides as reaction products that facilitated an ultrahigh-throughput in vivo single-cell-based assay of glycosynthase activity. This assay was developed based on the distinct differences observed in relative fluorescence intensity of the triazole-containing fluorophore product formed during the click-chemistry reaction of organic glycosyl azides versus inorganic azides. This discovery formed the basis for proof of concept validation of a directed evolution methodology for screening and sorting glycosynthase mutants capable of synthesis of targeted fucosylated oligosaccharides. Our screening approach facilitated fluorescence-activated cell sorting of an error-prone polymerase chain reaction-based mutant library of fucosynthases expressed in Escherichia coli to identify several novel mutants that showed increased activity for β-fucosyl azide-activated donor sugars toward desired acceptor sugars (e.g., pNP-xylose and lactose). Finally, we discuss avenues for improving this proof of concept in vivo assay method to identify better glycosynthase mutants and further demonstrate the broader applicability of this screening methodology for synthesis of bespoke glycans.

Antioxidant and Antibacterial Activities of Dodecyl Tannin Derivative Linked with 1,2,3-Triazole

Dodecyl tannin derivative linked with 1,2,3-triazole was prepared by the click reaction of dodecyl azide and alkynylated tannin. The structure of tannin derivative was identified by FT-IR spectrometer and elemental analyzer, and the surface activity, antioxidant activity and antimicrobial activity of tannin derivative were studied. The surface tension of tannin derivative was significantly reduced because of the introduction of long chain alkyl groups, and the lowest surface tension was 38.87 mN/m at 1.0 mg/mL. The tannin derivative had strong ability to scavenge 1,1-diphenyl-2-picrylhydrazyl radical, the scavenging rate could reach 89.08 % at 0.25 mg/mL. The tannin derivative exhibited strong antibacterial activity against E. coli and S. aureus due to the increased fat-solubility of tannin derivative and the introduction of antibacterial triazole groups in molecular structure of tannin derivative, and the bacteriostatic ratios of tannin derivative against E. coli and S. aureus were 92.16 % and 89.21 % at 2.0 mg/mL, respectively. The tannin derivative can be used as good candidates for antibacterial packaging or antioxidant supplements.