Oxygen Vacancy Promoted O2 Activation over Perovskite Oxide for Low-Temperature CO Oxidation

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Adjacent single-atom irons boosting molecular oxygen activation on MnO2

Efficient molecular oxygen activation is crucial for catalytic oxidation reaction, but highly depends on the construction of active sites. In this study, we demonstrate that dual adjacent Fe atoms anchored on MnO₂ can assemble into a diatomic site, also called as MnO₂-hosted Fe dimer, which activates molecular oxygen to form an active intermediate species Fe(O = O)Fe for highly efficient CO oxidation. These adjacent single-atom Fe sites exhibit a stronger O₂ activation performance than the conventional surface oxygen vacancy activation sites. This work sheds light on molecular oxygen activation mechanisms of transition metal oxides and provides an efficient pathway to activate molecular oxygen by constructing new active sites through single atom technology.

Phase Transitions in a Perovskite Thin Film Studied by Environmental In Situ Heating Nano-Beam Electron Diffraction

The rich phase diagram of bulk Pr_1-x Ca_x MnO₃ resulting in a high tunability of physical properties gives rise to various studies related to fundamental research as well as prospective applications of the material. Importantly, as a consequence of strong correlation effects, electronic and lattice degrees of freedom are vigorously coupled. Hence, it is debatable whether such bulk phase diagrams can be transferred to inherently strained epitaxial thin films. In this paper, the structural orthorhombic to pseudo-cubic transition for x = 0.1 is studied in ion-beam sputtered thin films and differences to the respective bulk system are pointed out by employing in situ heating nano-beam electron diffraction to follow the temperature dependence of lattice constants. In addition, it is demonstrated that controlling the environment during heating, that is, preventing oxygen loss, is crucial in order to avoid irreversible structural changes, which is expected to be a general problem of compounds containing volatile elements under non-equilibrium conditions.

Structural and Morphological Engineering of Benzothiadiazole-Based Covalent Organic Frameworks for Visible Light-Driven Oxidative Coupling of Amines

Covalent organic frameworks (COFs) are appealing platforms for photocatalysts because of their structural diversity and adjustable optical band gaps. The construction of efficient COFs for heterogeneous photocatalysis of organic transformations is highly desirable. Herein, we constructed a photoactive COF containing benzothiadiazole and triazine (BTDA-TAPT), for which the morphology and crystallinity might be easily tuned by slight synthetic variation. To unveil the relationship of photocatalytic properties between the structure and morphology, analogous COFs were synthesized by precisely tailoring building blocks. Systematic investigations indicated that tuning the structure and morphology might greatly impact photoelectric properties. The BTDA-TAPT featuring ordered alignment and perfect crystalline nature was more beneficial for promoting charge transfer and separation, which exhibited superior photocatalytic activity for visible light-driven oxidative coupling of amines. Outcomes from this study reveal the intrinsic synergy effects between the structure and morphology of COFs for photocatalysis.

Oxygen Vacancies and Lewis Acid Sites Synergistically Promoted Catalytic Methane Combustion over Perovskite Oxides

An in-depth understanding of the surface properties-activity relationship could provide a fundamental guidance for the design of highly efficient perovskite-based catalysts for the control of anthropogenic methane emission. Herein, both oxygen vacancies and Coⁿ⁺ Lewis acid sites were purposely introduced on ordered macroporous La_0.8Sr_0.2CoO₃ monolithic catalysts by one-step reduction and selective etching in oxalic acid, and their synergistic effect on methane combustion was investigated. Combined with experimental and theoretical investigations, we revealed that the positively charged Coⁿ⁺ Lewis acid sites and single-electron-trapped oxygen vacancies (Vo·) formed an active pair, which enabled an effective localized electron cloud shift from Vo· to Coⁿ⁺. The characteristic electronic effect modulates surface electronic properties and coordination structures, thus resulting in superior oxygen activation capacity, lattice oxygen mobility, and reducibility, as well as favorable CH₄ interaction and oxidation. Our work not only gives insights into surface properties-activity relationships on perovskite for hydrocarbon combustion but also sheds substantial light on future environmental catalyst design and modulation for hydrocarbon pollutants elimination.

Efficient catalytic combustion of toluene at low temperature by tailoring surficial Pt0 and interfacial Pt-Al(OH)x species

Exploring highly efficient and low-cost supported Pt catalysts is attractive for the application of volatile organic compounds (VOCs) combustion. Herein, efficient catalytic combustion of toluene at low temperature over Pt/γ-Al₂O₃ catalysts has been demonstrated by tailoring active Pt species spatially. Pt/γ-Al₂O₃ catalyst with low Pt-content (0.26 wt%) containing both interfacial Pt-Al(OH)_x and surficial metallic Pt (Pt⁰) species exhibited super activity and water-resistant stability for toluene oxidation. The strong metal-support interaction located at the Al-OH-Pt interfaces elongated the Pt-O bond and contributed to the oxidation of toluene. Meanwhile, the OH group at the Al-OH-Pt interfaces had the strongest adsorption and activation capability for toluene and the derived intermediate species were subsequently oxidized by oxygen species activated by surficial Pt⁰ to yield carbon dioxide and water. This work initiated an inspiring sight to the design of active Pt species for the VOCs combustion.

Improved Catalytic Activity of the High-Temperature Water Gas Shift Reaction on Metal-Exsolved La0.9Ni0.05Fe0.95O3 by Controlling Reduction Time

The catalyst exsolved from nickel-doped perovskite oxide, La0.9Ni0.05Fe0.95O3, has been proven to be effective for gas-phase reactions. To obtain the optimum amount of exsolved nanoparticles from the parent perovskite oxide, control of the reduction treatment condition is vital. Here, the effect of reduction time on the exsolved nanoparticle distribution, and thus the catalytic activity of the high-temperature water gas shift reaction (WGSR), was investigated. Upon conducting a wide range of characterizations, we assumed that the exsolution process might be a two-step process. Firstly, the surface oxygen is extracted. Secondly, due to the unstable perovskite structure, the Ni ions in the bulk La0.9Ni0.05Fe0.95O3 continuously diffuse toward the surface and, as the reduction progresses, more nuclei are generated to form a greater number of nanoparticles. This assumption is proven by the fact that, with an increase in the exsolution treatment time, the population of exsolution nanoparticles increases. Moreover, as the reduction time increases, the high-temperature WGSR activity also increases. The temperature-programmed measurements suggest that the exsolved nanoparticles are the active reaction sites. We believe that this study is helpful for understanding exsolution behavior during reduction treatment and, thus, developing a perovskite exsolution catalyst for the WGSR.

The Effect of Co Incorporation on the CO Oxidation Activity of LaFe1−xCoxO3 Perovskites

Perovskite oxides are versatile materials due to their wide variety of compositions offering promising catalytic properties, especially in oxidation reactions. In the presented study, LaFe1−xCoxO3 perovskites were synthesized by hydroxycarbonate precursor co-precipitation and thermal decomposition thereof. Precursor and calcined materials were studied by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TG), and X-ray powder diffraction (XRD). The calcined catalysts were in addition studied by transmission electron microscopy (TEM) and N2 physisorption. The obtained perovskites were applied as catalysts in transient CO oxidation, and in operando studies of CO oxidation in diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). A pronounced increase in activity was already observed by incorporating 5% cobalt into the structure, which continued, though not linearly, at higher loadings. This could be most likely due to the enhanced redox properties as inferred by H2-temperature programmed reduction (H2-TPR). Catalysts with higher Co contents showing higher activities suffered less from surface deactivation related to carbonate poisoning. Despite the similarity in the crystalline structures upon Co incorporation, we observed a different promotion or suppression of various carbonate-related bands, which could indicate different surface properties of the catalysts, subsequently resulting in the observed non-linear CO oxidation activity trend at higher Co contents.

In Situ Anchoring Polymetallic Phosphide Nanoparticles within Porous Prussian Blue Analogue Nanocages for Boosting Oxygen Evolution Catalysis

The controllable synthesis of metal-based nanoclusters for heterogeneous catalytic reactions has received considerable attention. Nevertheless, manufacturing these architectures, while avoiding aggregation and retaining surface activity, remains challenging. Herein, for the first time we designed NiCoFe-Prussian blue analogue (PBA) nanocages as a support for in situ dispersion and anchoring of polymetallic phosphide nanoparticles (pMP-NPs). Benefiting from the porous surfaces and the synergistic effects between pMP-NPs and the cyano groups in PBA, the NiCoFe-P-NP@NiCoFe-PBA nanocages exhibit a significantly enhanced catalytic activity for oxygen evolution reaction (OER) with an overpotential of 223 mV at 10 mA cm^-2 and a Tafel slope of 78 mV dec^-1, outperforming the NiCoFe-PBA nanocubes, NiCoFe-P nanocages, NiFe-P-NP@NiFe-PBA nanocubes, and CoFe-P-NP@CoFe-PBA nanoboxes. This work not only offers the synthesis strategy of in situ anchoring pMP-NPs on PBA nanocages but also provides a new insight into optimized Gibbs free energy of OER by regulating electron transfer from metallic phosphides to PBA substrate.

Insight into the effect of manganese substitution on mesoporous hollow spinel cobalt oxides for catalytic oxidation of toluene

The cobalt oxides and manganese oxides have high-activity potential for catalytic oxidation of volatile organic compounds (VOCs), while the mesoporous hollow morphology is crucial to the mass transfer of reactant and product. Therefore, it is worth investigating the effect of manganese substitution in mesoporous hollow cobalt oxides on catalytic oxidation. Herein, a partially disordered spinel structure is formed by the Mn substitution in Co₃O₄ and the mesoporous hollow microsphere is improved in morphology homogeneity with the decrease of Co/Mn ratio in the range of 1.8-28.8. The 5Co1Mn (Mn-substituted Co₃O₄ with Co/Mn at 5.4) exhibits outstanding catalytic activity for toluene oxidation with 50% CO₂ generation at 237 °C, which is 21 °C lower than Co₃O₄. Moreover, the 5Co1Mn displays satisfactory stability in reusability, lifetime, and water resistance. The small defective crystallite, mesoporous hollow morphology, and high specific surface area endow Mn-substituted Co₃O₄ with more surface chemical adsorbed oxygen, enhancing the catalytic oxidation of toluene. Theoretical calculation on (311) plane of Co₃O₄ reveals that Mn²⁺ or Mn³⁺ substitution increases the formation energy of oxygen vacancy and makes it difficult to adsorb gaseous oxygen on the defective surface. The interaction between Co and Mn impedes the improvement of toluene oxidation because the mobility of lattice oxygen, the surface distribution of Co³⁺, and the ratio of surface adsorbed oxygen to surface lattice oxygen are hindered by Mn substitution. The chemical adsorbed oxygen is more active than lattice oxygen in the oxidation of adsorbed intermediates (phenolate, benzoate species, etc.). The Langmuir-Hinshelwood mechanism dominates in the catalytic oxidation at 200-250 °C, while the catalytic oxidation follows both the Langmuir-Hinshelwood mechanism and Mars-van Krevelen mechanism above 250 °C. This work provides some enlightenment for exploring the role of surface oxygen species in VOCs oxidation and uncovering the interaction in binary spinel oxides.

Amorphous Boron Dispersed in LaCoO3 with Large Oxygen Vacancies for Efficient Catalytic Propane Oxidation

Unsatisfactory oxygen mobility is a considerable barrier to the development of perovskites for low-temperature volatile organic compounds (VOCs) oxidation. This work introduced small amounts of dispersed non-metal boron into the LaCoO₃ crystal through an easy sol-gel method to create more oxygen defects, which are conducive to the catalytic performance of propane (C₃ H₈ ) oxidation. It reveals that moderate addition of boron successfully induces a high distortion of the LaCoO₃ crystal, decreases the perovskite particle size, and produces a large proportion of bulk Co²⁺ species corresponding to abundant oxygen vacancies. Additionally, surface Co³⁺ species, as the acid sites, which are active for cleaving the C-H bonds of C₃ H₈ molecules, are enriched. As a result, the LCB-7 (molar ratio of Co/B=0.93:0.07) displays the best C₃ H₈ oxidation activity. Simultaneously, the above catalyst exhibits superior thermal stability against CO₂ and H₂ O, lasting 200 h. This work provides a new strategy for modifying the catalytic VOCs oxidation performance of perovskites by the regulation of amorphous boron dispersion.

Nonthermal plasma catalysis for toluene decomposition over BaTiO3-based catalysts by Ce doping at A-sites: The role of surface-reactive oxygen species

The insights on the primary surface-reactive oxygen species and their relation with lattice defects is essential for designing catalysts for plasma-catalytic reactions. Herein, a series of Ba_1-xCe_xTiO₃ perovskite catalysts with high specific surface areas (68.6-85.6 m² g^-1) were prepared by a facile in-situ Ce-doping strategy and investigated to catalytically decompose toluene. Combining the catalysts with a nonthermal plasma produced a significant synergy effect. The highest decomposition efficiency (100%), CO_x selectivity (98.1%), CO₂ selectivity (63.9%), and the lowest O₃ production (0 ppm) were obtained when BC₄T (Ce/Ti molar ratio = 4:100) was packed in a coaxial dielectric barrier discharge reactor at a specific input energy of 508.8 J L^-1. The H₂-TPR, temperature-programmed Raman spectra, EPR and OSC results suggested that superoxides (^•O₂^-) were the primary reactive oxygen species and were reversibly generated on the perovskite surface. Molecular O₂ was adsorbed and activated at the active sites (Ti³⁺-V_O) via an electron transfer process to form ^•O₂^-. Surface-adsorbed ^•O₂^- had a greater effect on the heterogeneous surface plasma reactions than the dielectric constant, and enhanced the toluene decomposition and intermediate oxidation. A possible reaction path of toluene decomposition was also proposed.

Direct Regulation of Double Cation Defects at the A1A2 Site for a High-Performance Oxygen Evolution Reaction Perovskite Catalyst

Perovskites are one of the efficient catalysts for the oxygen evolution reaction (OER), and they belong to the primary ABO₃ in which the A site and B site are site-substituted, and oxygen vacancies are introduced. Further improvement of these complex perovskites is the next necessary topic for specific applications. Herein, two complex perovskites, La_0.6Sr_0.4Co_0.8Fe_0.2O_3-δ (LSCF) and Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF), are exploited as the examples to demonstrate the double cation defects-introduced method of A1 and A2 to supply superimposed enhancement of the activity and stability. This is based on the fact that the increased content of oxygen vacancies and coordination can balance the oxygen vacancy and B-site element oxidation state. The electrochemical measurements revealed that the optimized A-LSCF10 and A-BSCF10 both exhibit outstanding OER catalytic activity. A small Tafel slope (57 mV dec^-1) and a low overpotential (228 mV at 10 mA cm^-2) for A-LSCF10 (vs 93 mV dec^-1 and 345 mV at 10 mA cm^-2 for A-LSCF0), and a small Tafel slope (65 mV dec^-1) and an overpotential (242 mV at 10 mA cm^-2) for A-BSCF10 (vs 66 mV dec^-1 and 308 mV at 10 mA cm^-2 for A-BSCF0) are determined, as well as good stability for 24 h.

Catalytic performance of the Ce-doped LaCoO3 perovskite nanoparticles

A series of La1-xCexCoO3 perovskite nanoparticles with rhombohedral phases was synthesized via sol-gel chemical process. X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Electron Diffraction Spectroscopy (EDS), Thermogravimetric Analysis (TGA), UV-Vis spectroscopy, Fourier Transform Infrared spectra (FTIR), Nitrogen Adsorption/desorption Isotherm, Temperature Program Reduction/Oxidation (TPR/TPO), X-ray Photoelectron Spectroscopy (XPS) techniques were utilized to examine the phase purity and chemical composition of the materials. An appropriate doping quantity of Ce ion in the LaCoO3 matrix have reduced the bond angle, thus distorting the geometrical structure and creating oxygen vacancies, which thus provides fast electron transportation. The reducibility character and surface adsorbed oxygen vacancies of the perovskites were further improved, as revealed by H2-TPR, O2-TPD and XPS studies. Furthermore, the oxidation of benzyl alcohol was investigated using the prepared perovskites to examine the effect of ceria doping on the catalytic performance of the material. The reaction was carried out with ultra-pure molecular oxygen as oxidant at atmospheric pressure in liquid medium and the kinetics of the reaction was investigated, with a focus on the conversion and selectivity towards benzaldehyde. Under optimum reaction conditions, the 5% Ce doped LaCoO3 catalyst exhibited enhanced catalytic activity (i.e., > 35%) and selectivity of > 99%, as compared to the other prepared catalysts. Remarkably, the activity of catalyst has been found to be stable after four recycles.

Topological transformation of LDH nanosheets to highly dispersed PtNiFe nanoalloys enhancing CO oxidation performance

Highly dispersed nanoalloys with a tailored metal-oxide interface are pivotal in developing advanced catalysts with superior performance for applications. Herein, a series of highly dispersed Pt/NiFeAl nanoalloys on amorphous supports were successfully fabricated by a topological transformation of layered-double-hydroxide nanosheets. With increasing reduction temperature, samples Pt/NiFeAl-x (x = reduction temperature) showed a progressive transformation from Pt/NiFeAl-LDH to a mixture (Pt, NiFe alloys, FeOy, and NiOy) supported on amorphous Al2O3, which eventually transformed to atomically dispersed PtNiFe alloys supported on amorphous Al2O3. Systematic sample characterization demonstrates that amorphous alumina-supported PtNiFe nanoalloys are merited by excellent redox ability, outstanding O2 activation ability, and moderate CO adsorption strength. When tested as catalysts for CO oxidation, all samples have demonstrated an apparent interfacial effect on catalytic performance, among which Pt/NiFeAl-600 shows a strikingly high CO oxidation activity at low-temperatures coupled with a broader operation temperature window (i.e. CO conversion >99.0%, 100-400 °C). Such a topological transformation strategy has proven applicable for generating atomically dispersed nanoalloys on amorphous supports for catalytic applications.

On the Interaction between Superatom Al12Be and DNA Nucleobases/Base Pairs: Bonding Nature and Potential Applications in O2 Activation and CO Oxidation

The interaction between quasi-chalcogen superatom Al₁₂Be and DNA nucleobases/base pairs has been explored by searching for the most stable Al₁₂Be-X (X = DNA bases and base pairs) complexes. Our results reveal that Al₁₂Be prefers to combine with guanine by two Al-O and Al-N bonds rather than the other DNA bases, no matter in free state or base pair. The formed Al-N and Al-O bonds between Al₁₂Be and DNA bases proved to be strong polar covalent bonds by the Wiberg bond index, nature bond orbitals, atoms in molecules theory, localized molecular orbitals, and electron localization functions analyses. More importantly, it is found that the formed global minimum of Al₁₂Be-G has the ability to activate an oxygen molecule into a peroxide dianion ¹O₂ ^2-, which can further catalyze the CO oxidation via the Eley-Rideal mechanism with a small energy barrier of 7.78 kcal/mol. We hope that this study could not only provide an in-depth understanding on the intermolecular interaction between metallic superatoms and DNA at the molecular level but also attract more interest in designing and synthesizing superatom-based heterogeneous catalysts with DNA/nucleobases as basic building blocks.

Controllable P Doping of the LaCoO3 Catalyst for Efficient Propane Oxidation: Optimized Surface Co Distribution and Enhanced Oxygen Vacancies

The properties of LaCoO₃ are modified by a controllable P doping strategy via a simple sol-gel route. It is demonstrated that appropriate P doping is beneficial for forming a relatively pure perovskite phase and hinders the growth of perovskite nanoparticles. The combined results of density functional theory (DFT), extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES), temperature-programmed reduction of hydrogen (H₂-TPR), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption of ammonia (NH₃-TPD) reveal that appropriate P doping gives rise to more oxygen vacancies, optimized distribution of Co ions, and improved surface acidity, which are beneficial for the adsorption of active oxygen species and the activation of propane molecules, resulting in an excellent catalytic oxidation performance. Especially, LaCo_0.97P_0.03O₃ exhibits more surface-active oxygen species, higher bulk Co³⁺ proportion, increased surface Co²⁺ species, and increased acidity, resulting in its superior propane oxidation performance, which is dominated by the Langmuir-Hinshelwood mechanism. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirms that the presence of P will accelerate oxygen mobility, which in turn promotes the oxidation rate. Moreover, the obtained LaCo_0.97P_0.03O₃ catalyst displays excellent thermal stability during the 60 h durability test at 400 °C and strong resistance against 5 vol % H₂O and/or 5 vol % CO₂ for prolonged 150 h.

Thermodynamic and Kinetic Influence of Oxygen Vacancies on the Solar Water Oxidation Reaction of α-Fe2O3 Photoanodes

To reveal the role of oxygen vacancies in the solar water oxidation of α-Fe₂O₃ photoanodes, the kinetic and thermodynamic properties that are closely related to the water oxidation reaction of the α-Fe₂O₃ photoanode containing oxygen vacancies were investigated. Compared with the pristine α-Fe₂O₃ photoanode, the presence of surface oxygen vacancies can improve the water oxidation activity and stability of the α-Fe₂O₃ photoanode simultaneously, but the bulk oxygen vacancies have a negative effect on the water oxidation performance of the α-Fe₂O₃ photoanode. In thermodynamics, our investigations revealed that the presence of surface oxygen vacancies narrows the space charge region width of the α-Fe₂O₃ photoanode, which could boost the charge separation and transfer efficiency of the α-Fe₂O₃ photoanode during water oxidation. Because the surface property and hydrophilicity of α-Fe₂O₃ are modified owing to the presence of surface oxygen vacancies, the water oxidation kinetics of the α-Fe₂O₃ photoanode with surface oxygen vacancies is obviously boosted. Our findings in the present work provide comprehensive understanding of the thermodynamic and kinetic differences for α-Fe₂O₃ photoanodes with and without oxygen vacancies for solar water oxidation.

The solid-state in situ construction of Cu2O/CuO heterostructures with adjustable phase compositions to promote CO oxidation activity

Cu₂O/CuO heterojunctions were fabricated via in situ solid-state technology. Tuning the ratio of reactants enables optimization of the components of the Cu₂O/CuO heterostructures and their catalytic activities for CO oxidation.