Calixarene-Derived Fluorescent Probes

Recognition, mechanistic investigation and applications for the detection of biorelevant Cu2+/Fe2+/Fe3+ ions by ruthenium(ii)-polypyridyl based fluorescent sensors

Selective recognition of biorelevant Cu²⁺ and Fe²⁺/Fe³⁺ ions using fluorescent Ru(ii)-polypyridyl based sensors via both “turn-on” and “turn-off” emissive response is the main focus of present article.

Three in one sensor: a fluorometric, colorimetric and paper based probe for the selective detection of mercury(ii)

A new fluorometric, colorimetric and paper-based probe for the selective detection of mercury(ii) with a detection limit of 8.0 ppm.

Calix[4]arenes bearing triazolyl anthracenes: Hg2+-selective receptors exhibiting fluorescence or dual optical responses

An azo-coupled calix[4]arene with triazolyl anthracenes detects Hg2+ with high selectivity via dual optical responses.

Thiophene-phenylquinazoline probe for selective ratiometric fluorescence and visual detection of Fe(iii) and turn-off fluorescence for I- and its applications

A 2,5-bis(4-phenylquinazolin-2-yl)thiophene (BQT) probe is designed, synthesized and explored for selective ratiometric fluorescence and visual detection of Fe³⁺ and as a turn-off fluorescence probe for I^- anion. BQT is colorless and has blue emission in CH₃CN solution. BQT selectively complexes with Fe³⁺, turns its solution from colorless to greenish yellow and enables the ratiometric sensing of Fe³⁺ with limit of detection (LOD) and limit of quantitation (LOQ) of 2 × 10^-8 M and 6.1 × 10^-8 M, respectively. Binding constant of BQT with Fe³⁺ is found to be 4.1 × 10^-4 M^-1. BQT is also able to sense I^- anion present in aqueous solution by selectively turning colorless to yellow and fluorescence quenching with a LOD of 1.7 × 10^-7 M and LOQ of 5.2 × 10^-7 M. BQT sensing ability is not influenced by the presence of other metal ions and anions in the vicinity. The BQT-Fe³⁺ complex is thoroughly characterized using MALDI-TOF, NMR and Job's plot. A reversibility experiment with EDTA suggests BQT is a reversible fluorescent chemosensor for Fe³⁺ ions. The spectroscopic data of BQT and its complexes are employed to construct a field test kit for qualitative analysis and INHIBIT logic gate.

A Heparin based dual ratiometric sensor for Thrombin

Thrombin is an important enzyme that plays a pivotal role in the blood clotting pathways. An imbalance in the activity of this enzyme is clinically known to be associated with various diseases, such as thrombosis, inflammation, atherosclerosis, and haemophilia, suggesting the need to devise sensors for Thrombin detection. However, the majority of the fluorescence-based Thrombin assays rely on fluorescence labelling assays or Thrombin specific recognition biomolecules, such as, aptamers or antibody which requires sophisticated techniques and makes it very expensive. Herein, we report a simple, selective, sensitive and label-free fluorescence detection scheme for Thrombin which is based on the interaction between Thrombin and a fluorescent complex of Heparin with a molecular rotor dye, Thioflavin-T. The detection scheme exploits selective interaction between cationic Thrombin and anionic Heparin to modulate the monomer-aggregate equilibrium of the Thioflavin-T-Heparin system. Importantly, the present system offers a ratiometric response that has the ability for robust quantification of Thrombin concentration even in complex medium. The involvement of all commercially available components is a crucial advantage of this detection scheme. Further, the detection scheme also shows reasonable response in diluted serum matrix.

A novel supramolecule-based fluorescence turn-on and ratiometric sensor for highly selective detection of glutathione over cystein and homocystein

A cyclodextrin-based fluorescence light-up and ratiometric sensor is reported for highly selective and sensitive recognition of glutathione over cystein and homocystein. The sensing scheme developed builds up on a supramolecular assembly formed between a molecular rotor dye (ThT) and a polyanionic supramolecular host (sulfated-β-cyclodextrin, SCD). The detection scheme is accomplished as follows: firstly, the bivalent Cu²⁺ quenches the emission from ThT-SCD assembly by causing the dissociation of ThT molecules from SCD surface. Secondly, when GSH is added to the copper-quenched system, owing to specific interaction between Cu²⁺ and GSH, Cu²⁺ is removed from the SCD which again allows the formation of ThT-SCD assembly. Indeed, this scheme of disassembly and reassembly successively caused by Cu²⁺ and GSH in the aqueous solution empowers our sensor framework to work as a good ratiometric sensor for the detection of GSH. The sensor scheme shows a linear response in the range 0-250 μM with a LOD of 2.4 ± 0.2 μM in aqueous solution and 13.6 ± 0.5 μM in diluted human serum sample. The sensor system is excited at 410 nm and the emission signal is plotted as a ratio of intensity at 545 nm (aggregate band) and 490 nm (monomer band). This ratiometric sensor system is highly selective to glutathione over cystein, homocystein, and other amino acids. Additionally, response of the sensor system towards GSH in complex biological media of serum samples demonstrates its potential for practical utility. Graphical abstract.

Turn on fluorescence strip based sensor for recognition of Sr2+ and CN- via lowerrim substituted calix[4]arene and its computational investigation

Fluorescence sensor L designed around a calix[4]arene scaffold, bearing two fluorogenic aminoquinoline moities, has been synthesized. It is found to be selective and sensitive towards Sr²⁺ and CN^- over a wide range of cations and anions in a spectrofluorometric study in acetonitrile. The ion-binding property of L was monitored by fluorescence spectroscopy, UV-vis spectroscopy, ESI-MS, ¹H NMR, FT-IR investigation and PXRD study. The host L shows a minimum detection limit which is 1.36 nM for Sr²⁺ and 1.23 nM for CN^- having concentration range 5-120 nM and 5-115 nM respectively. The calculated binding constants for L:Sr²⁺ and L: CN^- are respectively 8.859 × 10⁸ M^-1 and 8.574 × 10⁸ M^-1. Our host L has been utilised in formation of a user-friendly, affordable, and disposable paper-based analytical device (PAD) for rapid chemical screening of Sr²⁺ and CN^- ion via single strip. Moreover, the optimization of probe L has also been done by the MOPAC-2016 software package using NM7 popular method resulting -21.71 kcals/mol heat of formation and also determined the HOMO-LUMO energy band gap for L, L:Sr²⁺ and L: CN^-. Further, molecular docking score has been calculated using HEX software. The applicability of our probe in real samples containing Sr²⁺ and CN^- has also been checked by emission study with 94-99% recovery.

Control of Guest Inclusion and Chiral Recognition Ability of 6-O-Modified β-Cyclodextrins in Organic Solvents by Aromatic Substituents at the 2-O Position

The host-guest chemistry and applications of cyclodextrins in aqueous media is well established. However, a comprehensive study in organic solvents is lacking. Here, we report the design and synthesis of 6-O-tert-butyldimethylsilylated β-cyclodextrin (TBDMS-β-CD) bearing various aromatic substitutions at the 2-O position and their inclusion complex formation with aromatic guests in nonpolar organic solvents. Compared to the parent TBDMS-β-CD, these derivatives exhibit at least a 10-fold increase in inclusion ability toward pyrene through cooperative guest binding with the CD cavity and the aromatic substituents at the 2-O position. The type of the aromatic substituent largely affects the chiral recognition ability of TBDMS-β-CD toward 1-(1-naphthyl)ethylamine in cyclohexane. A TBDMS-β-CD derivative with a p-tolyl substituent has a remarkable chiral selectivity for the (S)-1-(1-naphthyl)ethylamine over the corresponding (R)-isomer (K_S /K_R =4.1±0.5), whereas a TBDMS-β-CD derivative with a 2-picolyl substituent shows the inverse chiral selectivity (K_R /K_S =8.7±0.6).

Coumarin-Based Dual Chemosensor for Colorimetric and Fluorescent Detection of Cu2+ in Water Media

A novel coumarin derivative (5) was synthesized and used as a colorimetric and fluorescent probe for selective detection of Cu²⁺ ions in the presence of other metal ions, with the detection limits of 5.7 and 4.0 ppb, respectively. Cu²⁺ ion reacts with probe 5 to form a 1:1 stoichiometry complex, resulting in a remarkable redshift of absorption maximum from 460 to 510 nm, as well as almost completely quenching fluorescence intensity of probe 5 at the wavelength of 536 nm. These changes can be distinctly observed by naked eyes. In addition, the working pH range of probe 5 is wide and suitable for physiological conditions, thus probe 5 may be used for detection of Cu²⁺ ions in living cells. The stable structures of probe 5 and its 1:1 complex with Cu²⁺ ion were optimized at the PBE0/6-31+G(d) level of theory. The presence and characteristics of bonds in compounds were studied through atoms in a molecule and natural bond orbital analysis. The formation of the complex led to a strong transfer of electron density from probe 5 as a ligand to Cu²⁺ ion, resulting in breaking the π-electron conjugated system, which is the cause of fluorescence quenching and color change of 5-Cu²⁺ complex.

Effect of Moderate Hydrogen Bonding on Tautomer Formation via Excited-State Intermolecular Proton-Transfer Reactions in an Aromatic Urea Compound with a Steric Base

1,8-Diazabicyclo[5.4.0]undec-7-ene (DBU), which forms weak hydrogen bonds despite the high basicity caused by its hindered structure, was used to investigate tautomer formation via excited-state intermolecular proton-transfer (ESPT) reactions. The kinetics of the ESPT reactions of anthracen-2-yl-3-phenylurea (2PUA) in the presence of DBU were compared to that observed for the acetate anion (Ac) using time-resolved fluorescence measurement. Based on the association constants in the ground state, the intermolecular hydrogen bond between 2PUA and DBU was less stable than the bond between 2PUA and Ac due to steric hindrance and the geometry of the hydrogen bond. In the fluorescence spectra, 2PUA-DBU displayed prominent tautomeric emission in chloroform (CHCl₃), whereas 2PUA-Ac exhibited distinct tautomeric emissions in dimethyl sulfoxide (DMSO). Kinetic analysis revealed that the rate constant of the ESPT reaction of 2PUA-DBU remarkably decreased when the proton-accepting ability of the solvent increased whereas the reaction of 2PUA-Ac was linked to the solvent polarity rather than proton-accepting ability. These results indicated that moderate hydrogen bonds due to steric hindrance were influenced by the type of solvent present, particularly if the solvents exhibited proton-accepting capabilities like DMSO. This, in turn, affected the rate constant of tautomer formation.

Sensitive and selective sensing system of metallothioneins based on carbon quantum dots and gold nanoparticles

In this study, we developed a sensitive and selective sensing system for the detection of metallothioneins (MTs). The system is based on the fluorescence resonance energy transfer (FRET) between carbon quantum dots (CQDs) and gold nanoparticles (AuNPs). In this method, the fluorescence emission of CQDs was quenched by AuNPs due to FRET. When MTs were added to the CQD-AuNP system, the strong combination between thiol group and Au made the CQDs release from AuNPs, and the fluorescence of CQDs was recovered. The CQD-AuNP system can detect the MTs in aqueous solution (pH 3.0, citrate-HCl buffer) selectively and sensitively with a short response time (15 min). Results show that the fluorescence recovery efficiency has a good linear relationship with the MTs concentration in the range of 12-210 nmol L^-1, and the limit of detection was 5.25 × 10^-9 mol L^-1. Furthermore, the sensing system was utilized to determine MTs in human urine samples with satisfactory results. The proposed system exhibits the advantages of high sensitivity, high selectivity, easy operation and most importantly, low cost and non-cytotoxicity to detect protein MTs.

Development of a molecular K+ probe for colorimetric/fluorescent/photoacoustic detection of K. Anal Bioanal Chem 2020;412:6947-6957. [PMID: 32712812 DOI: 10.1007/s00216-020-02826-y]

The potassium ion (K⁺) plays significant roles in many biological processes. To date, great efforts have been devoted to the development of K⁺ sensors for colorimetric, fluorescent, and photoacoustic detection of K⁺ separately. However, the development of molecular K⁺ probes for colorimetric detection of urinary K⁺, monitoring K⁺ fluxes in living cells by fluorescence imaging, and photoacoustic imaging of K⁺ dynamics in deep tissues still remains an open challenge. Herein, we report the first molecular K⁺ probe (NK2) for colorimetric, fluorescent, and photoacoustic detection of K⁺. NK2 is composed of 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TCF) as the chromophore and phenylazacrown-6-lariat ether (ACLE) as the K⁺ recognition unit. Predominate features of NK2 include a short synthetic procedure, high K⁺ selectivity, large detection range (5-200 mM), and triple-channel detection manner. NK2 shows good response to K⁺ with obvious color changes, fluorescence enhancements (about threefold), and photoacoustic intensity changes. The existence of other metal ions (including Na⁺, Mg²⁺, Ca²⁺, Fe²⁺) and pH changes (6.5-9.0) have no obvious influence on K⁺ sensing of NK2. Portable test strips stained by NK2 can be used to qualitatively detect urinary K⁺ by color changes for self-diagnosis of diseases induced by high levels of K⁺. NK2 can be utilized to monitor K⁺ fluxes in living cells by fluorescent imaging. We also find its excellent performance in photoacoustic imaging of different K⁺ concentrations in the mouse ear. NK2 is the first molecular K⁺ probe for colorimetric, fluorescent, and photoacoustic detection of K⁺ in urine, in living cells, and in the mouse ear. The development of NK2 will broaden K⁺ probes' design and extend their applications to different fields. Graphical abstract.

Exploring pH Dependent Host/Guest Binding Affinities

When the electrostatic environment surrounding binding partners changes between unbound and bound states, the net uptake or release of a proton is possible by either binding partner. This process is pH-dependent in that the free energy required to uptake or release the proton varies with pH. This pH-dependence is typically not considered in conventional free energy methods where the use of fixed protonation states is the norm. In the present paper, we apply a simple two-step approach to calculate the pH-dependent binding free energy of a model cucubit[7]uril host/guest system. By use of λ-dynamics with an enhanced sampling protocol, adaptive landscape flattening, pK_a shifts and reference binding free energies upon complexation were determined. This information enables the construction of pH-dependent binding profiles that accurately capture the pK_a shifts and reproduce binding free energies at the different pH conditions that were observed experimentally. Our calculations illustrate a general framework for computing pH-dependent binding free energies but also point to some issues in modeling the molecular charge distributions within this series of molecules with CGenFF. However, by introducing some minor charge modifications to the CGenFF force field, we saw significant improvement in accuracy of the calculated pK_a shifts.

Elucidating sensing mechanisms of a pyrene excimer-based calix[4]arene for ratiometric detection of Hg(ii) and Ag(i) and chemosensor behaviour as INHIBITION or IMPLICATION logic gates

This article reports the synthesis and characterisation of two lower rim calix[4]arene derivatives with thiourea as spacer and pyrene or methylene-pyrene as fluorophore. Both derivatives exhibit a fluorimetric response towards Hg²⁺, Ag⁺ and Cu²⁺. Only methylene-pyrenyl derivative 2 allows for selective detection of Hg²⁺ and Ag⁺ by enhancement or decrease of excimer emission, respectively. The limits of detection of 2 are 8.11 nM (Hg²⁺) and 2.09 nM (Ag⁺). DFT and TD-DFT computational studies were carried out and used to identify possible binding modes that explain the observed response during fluorescence titrations. Calculations revealed the presence of different binding sites depending on the conformation of 2, which suggest a reasonable explanation for non-linear changes in fluorescence depending on the physical nature of the interaction between metal centre and conformer. INHIBITION and IMPLICATION logic gates have also been generated monitoring signal outputs at pyrene monomer (395 nm) and excimer (472 nm) emission, respectively. Thus 2 is a potential primary sensor towards Ag⁺ and Hg²⁺ able to configure two different logic gate operations.

Bithiophene-based fluorescent sensor for highly sensitive and ultrarapid detection of Hg2+ in water, seafood, urine and live cells

Using Hg²⁺-promoted deprotection reaction, we have developed a new fluorescent turn-on sensor 2TS based on bithiophene fluorophore for Hg²⁺ detection. The sensing mechanism of 2TS towards Hg²⁺ was strongly proved by ¹H NMR, FTIR, HRMS, UV-vis and fluorescence spectra. Remarkly, 2TS towards Hg²⁺ in 100% aqueous solution shows high sensitivity with a low detection limit of 19 nM, superior selectivity and ultra-rapid response of 20 s during a wide sensing pH range from 4 to 10. Taking advantage of the excellent properties, the low-cost sensor 2TS-based filter paper/TLC test strips were fabricated for visual, immediate and quantitative detection of Hg²⁺ in water, proving its applicability towards sensitive in-situ and on-site detection. Meanwhile, 2TS showed high analytical performance for Hg²⁺ detection in water, seafood as well as human urine samples. Moreover, thanks to the good water solubility, negligible cytotoxicity, good biocompatibility and cell-membrane permeability, 2TS was further applied to effectively image Hg²⁺ in live cells. Furthermore, the developed sensor 2TS acted as good fluorescent display material for Hg²⁺ with obvious color change.

A pH tuning single fluorescent probe based on naphthalene for dual-analytes (Mg2+ and Al3+) and its application in cell imaging

In this study, a naphthalene Schiff-base P which serves as a dual-analyte probe for the quantitative detection of Al3+ and Mg2+ has been designed. The proposed probe showed an ''off-on'' fluorescent response toward Al3+ in ethanol-water solution (1 : 9, v/v, pH 6.3, 20 mM HEPES) over other metal ions and anions, while the detection by the probe could be switched to Mg2+ by regulating the pH from 6.3 to 9.4. The sensing mechanisms of P to Al3+/Mg2+ are attributed to inhibition of the photo-induced electron transfer (PET) process by the formation of 1 : 1 ligand-metal complexes. More importantly, the probe was applied successfully in living cells for the fluorescent cell-imaging of Al3+ and Mg2+.

Solvent Switched Weak Interaction of a 4-Quinazolinone with a Cavitand Derivative

Interaction of 4-quinazolinone with tetrakis (3,5-dicarboxylatophenoxy)-cavitand derivative has been studied in methanol and dimethylformamide media using fluorescence spectroscopy and molecular modeling methods. Results show temperature dependent complex formation: either the entropy gain or the high enthalpy changes are responsible for the formation of stable complexes in two separated temperature regions. However, different thermodynamic parameters are associated to different conformations of the complexes: while the high entropy gain associated to the formation of deeply included guest in methanol, the high entropy gain is associated with the formation of weakly included guest in dimethylformamide solvent. This finding highlights the importance of dynamic properties of the species interacted in different solvents.

Colorimetric dual sensor for Cu(II) and tyrosine and its application as paper strips for detection in water and human saliva as real samples

A calix[4]arene based compound incorporating amide and morpholine moieties has been synthesized and its ion recognition property towards metal ions and application of its metal complex towards sensing of amino acids has been investigated. The synthesized compound interacts with Cu²⁺ with high selectivity and sensitivity (LOD, 0.1 ppb) in aqueous media with instant color change from colorless to yellow without interference from any other metal ions used in this study. The molecular structure of the calix compound (1) has been determined by single crystal X-ray study and the structure of its Cu²⁺ complex has been established by DFT calculation. The Cu²⁺ complex of 1 selectively detects tyrosine (LOD, 1.2 ppm) in water with distinct color change and without any interference from other 22 amino acids used in this study. The mechanism for detection of tyrosine with color change is also presented. For easy field application, paper based sensor strips have been prepared by coating compound 1 and its Cu²⁺ complex on filter paper, which have been used for semi-quantitative measurement of Cu²⁺ and tyrosine. Compound 1 and its Cu²⁺ complex have also been used for detection of Cu²⁺ and tyrosine, respectively in water and human saliva as real samples and satisfactory results are obtained.

Regio- and stereoselective synthesis of spiropyrrolidine-oxindole and bis-spiropyrrolizidine-oxindole grafted macrocycles through [3 + 2] cycloaddition of azomethine ylides

A convenient and efficient method for the regioselective macrocyclization of triazole bridged spiropyrrolidine-oxindole, and bis-spiropyrrolizidine-oxindole derivatives was accomplished through intra and self-intermolecular [3 + 2] cycloaddition of azomethine ylides. The chalcone isatin precursors 9a-i required for the click reaction were obtained from the reaction of N-alkylazidoisatin 4 and propargyloxy chalcone 8a-i which in turn were obtained by the aldol condensation of propargyloxy salicylaldehyde 6 and substituted methyl ketones 7a-i. The regio- and stereochemical outcome of the cycloadducts were assigned based on 2D NMR and confirmed by single crystal XRD analysis. High efficiency, mild reaction conditions, high regio- and stereoselectivity, atom economy and operational simplicity are the exemplary advantages of the employed macrocyclization procedure.

Molecularly tunable thin-film nanocomposite membranes with enhanced molecular sieving for organic solvent forward osmosis

Thin-film nanocomposites (TFN) functionalized with tunable molecular-sieving nanomaterials have been employed to tailor membranes, with an enhanced permeability and selectivity. Herein, water-soluble hollow cup-like macrocyclic molecules, sulfothiacalix[4]arene (STCAss) and sulfocalix[4]arene (SCA), are ionically bonded into the polyamide network to engineer the molecular-sieving properties of TFN membranes for organic solvent forward osmosis (OSFO). Introducing both STCAss and SCA into the polyamide network not only increases the free volume, but also reduces the thickness of the TFN layers. Combining with their molecularly tunable size of the lower cavities, both STCAss and SCA enable the TFN membranes to size exclusively reject the draw solutes, but only STCAss-functionalized membrane has an ethanol flux doubling the pristine one under the FO and PRO modes in OSFO processes; leading the functionalized polyamide network with remarkable improvements in OSFO performance. This study may provide insights to molecularly functionalize TFN membranes using multifunctional nano-fillers for sustainable separations.

Thin-film nanocomposites (TFN) nanomaterials have been employed to tailor permeability and selectivity in membranes, but achieving effective separation at large flux retains challenging. Here, the authors use calix[4]arene derivatives which are ionically bonded to a polyamide network to engineer the molecular-sieving properties of TFN membranes for organic solvent forward osmosis (OSFO).

Calixarene-Based Supramolecular AIE Dots with Highly Inhibited Nonradiative Decay and Intersystem Crossing for Ultrasensitive Fluorescence Image-Guided Cancer Surgery

Host-guest complexation between calix[5]arene and aggregation-induced emission luminogen (AIEgen) can significantly turn off both the energy dissipation pathways of intersystem crossing and thermal deactivation, enabling the absorbed excitation energy to mostly focus on fluorescence emission. The co-assembly of calix[5]arene amphiphiles and AIEgens affords highly emissive supramolecular AIE nanodots thanks to their interaction severely restricting the intramolecular motion of AIEgens, which also show negligible generation of cytotoxic reactive oxygen species. In vivo studies with a peritoneal carcinomatosis-bearing mouse model indicate that such supramolecular AIE dots have rather low in vivo side toxicity and can serve as a superior fluorescent bioprobe for ultrasensitive fluorescence image-guided cancer surgery.

A Quinoline-Appended Cyclodextrin Derivative as a Highly Selective Receptor and Colorimetric Probe for Nucleotides

The design and development of specific recognition and sensing systems for biologically important anionic species has received growing attention in recent years, as they play significant roles in biology, pharmacy, and environmental sciences. Herein, a new supramolecular sensing probe L1 was developed for highly selective differentiation of nucleotides. L1 displayed extremely marked absorption and emission differentiation upon binding with nucleotide homologs of AMP, ADP, and ATP, due to the divergent spatial orientations of guests upon binding, which allowed for a naked-eye colorimetric differentiation for nucleotides. A differentiating mechanism was unambiguously rationalized by using various spectroscopic studies and theoretical calculations. Furthermore, we successfully demonstrated that L1 can be applied to the real-time monitoring of the enzyme-catalyzed phosphorylation/dephosphorylation processes and thus demonstrated an unprecedented visualizable strategy for selectively differentiating the structurally similar nucleotides and real-time monitoring of biological processes via fluorescent and colorimetric changes.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.

Selective sensing of ATP by hydroxide-bridged dizinc(ii) complexes offering a hydrogen bonding cavity

This work illustrates the highly selective fluorescence detection of ATP in the presence of other competing anions, such as AMP, ADP, PPi and other phosphates by using a set of hydroxide-bridged dizinc(ii) complexes offering a cavity lined with hydrogen bonds and other interactive forces. ATP, as a whole, was recognized by the synergic combination of Zn-phosphate bonding, ππ stacking between the adenine ring of ATP and the pyridine ring of the dizinc complex and hydrogen bonding interactions that modulate the cavity structure of the dizinc complexes.

Strapped calix[4]pyrroles: from syntheses to applications

Supramolecular chemistry is a central topic in modern chemistry. It touches on many traditional disciplines, such as organic chemistry, inorganic chemistry, physical chemistry, materials chemistry, environmental chemistry, and biological chemistry. Supramolecular hosts, inter alia macrocyclic hosts, play critical roles in supramolecular chemistry. Calix[4]pyrroles, non-aromatic tetrapyrrolic macrocycles defined by sp³ hybridized meso bridges, have proved to be versatile receptors for neutral species, anions, and cations, as well as ion pairs. Compared to the parent system, octamethylcalix[4]pyrrole and its derivatives bearing simple appended functionalities, strapped calix[4]pyrroles typically display enhanced binding affinities and selectivities. In this review, we summarize advances in the design and synthesis of strapped calix[4]pyrroles, as well as their broad utility in molecular recognition, supramolecular extraction, separation technology, ion transport, and as agents capable of inhibiting cancer cell proliferation. Future challenges within this sub-field are also discussed.

Boron-Conjugated Pyrenes as Fluorescence-Based Molecular Probes and Security Markers

Boron-embedded aromatic hydrocarbons are a class of molecules known for their distinct electronic and/or optoelectronic properties and are thus suitable for many potential applications. Among those, boronic ester and acid containing molecules have been widely used for sensing and molecular recognition applications, respectively. We compared the sensing and molecular recognition properties of two boron-containing pyrene derivatives for fluoride and glucose sensing applications. The presence of four boronate ester groups enabled fluoride ion sensing at the μM level. The boronic acid derivative is very selective towards glucose compared to other saccharides. Furthermore, we used the mechano-responsive fluorescence changes and self-assembly of these derivatives, respectively, for fluorescence-based inkless and ink (water)-based writing in invisible security labeling applications.

Fluorescent Labelling of Glycans with FRET-Based Probes in a Gold(III)-Mediated Three-Component Coupling Reaction

Single-site multifunctionalization of glycans is of importance in biological studies considering its crucial role in mediating biological events and human diseases. In this paper, a novel approach for multifunctional labelling of glycans has been developed featuring the use of fluorescence resonance energy transfer-based (FRET-based) probes for fluorescent labelling of glycans through a gold(III)-mediated three-component coupling reaction. Oxidation of glycans into aldehydes followed by the A³ -coupling reaction with FRET-based probes resulted in the single-site formation of fluorescent propargylamine products. The conversion of labelled glycans can be revealed by ratiometric analysis of the FRET signals. This labelling approach results in multifunctionalization of glycans with high selectivity and conversion between 66 and 69 %.