Surface-enhanced Raman spectroscopy (SERS) for environmental analyses

Multilayer Ag-Embedded Silica Nanostructure as a Surface-Enhanced Raman Scattering-Based Chemical Sensor with Dual-Function Internal Standards

Surface-enhanced Raman scattering (SERS) spectroscopy is attractive in various detection analysis fields. However, the quantitative method using SERS spectroscopy remains as an area to be developed. The key issues in developing quantitative analysis methods by using SERS spectroscopy are the fabrication of reliable SERS-active materials such as nanoparticle-based structures and the acquisition of the SERS signal without any disturbance that may change the SERS signal intensity and frequency. Here, the fabrication of seamless multilayered core-shell nanoparticles with an embedded Raman label compound as an internal standard (ML_RLC dots) for quantitative SERS analysis is reported. The embedded Raman label compound in the nanostructure provides a reference value for calibrating the SERS signals. By using the ML_RLC dots, it is possible to gain target analyte signals of different concentrations while retaining the Raman signal of the internal standard. The ML_4-BBT dots, containing 4-bromobenzenethiol (4-BBT) as an internal standard, are successfully applied in the quantitative analysis of 4-fluorobenzenethiol and thiram, a model pesticide. Additionally, ratiometric analysis was proved practical through normalization of the relative SERS intensity. The ratiometric strategy could be applied to various SERS substrates for quantitative detection of a wide variety of targets.

Nanosensors for water quality monitoring

Nanomaterial-enabled sensors are being designed for high-efficiency, multiplex-functionality and high-flexibility sensing applications. Many existing nanosensors have the inherent capacity to achieve such goals; however, they require further development into consumer- and operator-friendly tools with the ability to detect analytes in previously inaccessible locations, as well as at a greater scale than heretofore possible. Here, I discuss how nanotechnology-enabled sensors have great, as yet unmet, promise to provide widespread and potentially low-cost monitoring of chemicals, microbes and other analytes in drinking water.

Ag/Au Nanoparticle-Loaded Paper-Based Versatile Surface-Enhanced Raman Spectroscopy Substrates for Multiple Explosives Detection

We present a systematic study on the fabrication, characterization of versatile, and low-cost filter paper-based surface-enhanced Raman spectroscopy (SERS) substrates loaded with salt-induced aggregated Ag/Au nanoparticles (NPs). These were demonstrated as efficient SERS substrates for the detection of multiple explosive molecules such as picric acid (5 μM), 2,4-dinitrotoluene (1 μM), and 3-nitro-1,2,4-triazol-5-one (10 μM) along with a common dye molecule (methylene blue, 5 nM). The concentrations of the dye and explosive molecules in terms of mass represent 31.98 pg, 11.45 ng, 1.82 ng, and 13.06 ng, respectively. Silver (Ag) and gold (Au) colloidal NPs were prepared by femtosecond laser (∼50 fs, 800 nm, 1 kHz) ablation of Ag/Au-target immersed in distilled water. Subsequently, the aggregated nanoparticles were achieved by mixing the pure Ag and Au NPs with different concentrations of NaCl. These aggregated NPs were characterized by UV-visible absorption and high-resolution transmission electron microscopy techniques. The SERS substrates were prepared by soaking the filter paper in aggregated NPs. The morphologies of the paper substrates were investigated using field-emission scanning electron microscopy technique. We have achieved superior enhancements with high reproducibility and sensitivity for filter paper substrates loaded with Ag/Au NPs mixed for an optimum concentration of 50 mM NaCl.

Utilization of Inexpensive Carbon-Based Substrates as Platforms for Sensing

Gold (Au) has been widely used as a material for Surface Enhanced Raman Spectroscopy (SERS) due to its plasmonic properties, stability and biocompatibility. Conventionally for SERS application, Au is deposited on a rigid substrate such as glass or silicon. The rigid substrates severely limit analyte collection efficiency as well as portability. Here, flexible substrates like carbon cloth and carbon paper were investigated as potential substrate candidates for SERS application. The flexible substrates were coated with Au nanostructures by electrodeposition. Model analyte, Rhodamine 6G was utilized to demonstrate the capabilities of the flexible SERS substrates. Additionally, the pesticide paraoxon was also detected on the flexible SERS substrates as well as on a real sample like the apple fruit.

Fabrication of a Flexible Gold Nanorod Polymer Metafilm via a Phase Transfer Method as a SERS Substrate for Detecting Food Contaminants

Surface enhanced Raman scattering (SERS) has been widely used in detection of food safety due to the nondestructive examination property. Here, we reported a flexible SERS film based on a polymer-immobilized gold nanorod polymer metafilm. Polystyrene-polyisoprene-polystyrene (SIS), a transparent and flexible, along with having excellent elasticity, polymer, was chosen as the main support of gold nanorods. A simple phase transfer progress was adopted to mix the gold nanorods with the polymer, which can further be used in most water-insoluble polymers. The SERS film performed satisfactorily while being tested in a series of standard Raman probes, like crystal violet (CV) and malachite green (MG). Moreover, the excellent reproducibility and elastic properties make the film a promising substrate in practical detection. Hence, the MG detection on the fish surface and trace thiram detection on orange pericarp were inspected with detection results of 1 × 10^-10 and 1 × 10^-6 M, which were below the demand of the National standard of China, exactly matching the realistic application requirements.

Surface-Enhanced Raman Scattering (SERS) in Microbiology: Illumination and Enhancement of the Microbial World

The microbial world forms a huge family of organisms that exhibit the greatest phylogenetic diversity on Earth and thus colonize virtually our entire planet. Due to this diversity and subsequent complex interactions, the vast majority of microorganisms are involved in innumerable natural bioprocesses and contribute an absolutely vital role toward the maintenance of life on Earth, whilst a small minority cause various infectious diseases. The ever-increasing demand for environmental monitoring, sustainable ecosystems, food security, and improved healthcare systems drives the continuous search for inexpensive but reproducible, automated and portable techniques for detection of microbial isolates and understanding their interactions for clinical, environmental, and industrial applications and benefits. Surface-enhanced Raman scattering (SERS) is attracting significant attention for the accurate identification, discrimination and characterization and functional assessment of microbial cells at the single cell level. In this review, we briefly discuss the technological advances in Raman and Fourier transform infrared (FT-IR) instrumentation and their application for the analysis of clinically and industrially relevant microorganisms, biofilms, and biological warfare agents. In addition, we summarize the current trends and future prospects of integrating Raman/SERS-isotopic labeling and cell sorting technologies in parallel, to link genotype-to-phenotype in order to define community function of unculturable microbial cells in mixed microbial communities which possess admirable traits such as detoxification of pollutants and recycling of essential metals.

Multi-metal, Multi-wavelength Surface-Enhanced Raman Spectroscopy Detection of Neurotransmitters

The development of a sensor for the rapid and sensitive detection of neurotransmitters could provide a pathway for the diagnosis of neurological diseases, leading to the discovery of more effective treatment methods. We investigate the use of surface enhanced Raman spectroscopy (SERS) based sensors for the rapid detection of melatonin, serotonin, glutamate, dopamine, GABA, norepinephrine, and epinephrine. Previous studies have demonstrated SERS detection of neurotransmitters; however, there has been no comprehensive study on the effect of the metal used as the SERS substrate or the excitation wavelength used for detection. Here, we present the detection of 7 neurotransmitters using both silver and gold nanoparticles at excitation wavelengths of 532, 633, and 785 nm. Over the range of wavelengths investigated, the SERS enhancement on the silver and gold nanoparticles varies, with an average enhancement factor of 10⁵-10⁶. The maximum SERS enhancement occurs at an excitation wavelength of 785 nm for the gold nanoparticles and at 633 nm for the silver nanoparticles.

Gold Nanoparticle-Coated ZrO₂-Nanofiber Surface as a SERS-Active Substrate for Trace Detection of Pesticide Residue

Trace detection of common pesticide residue is necessary to assure safety of fruit and vegetables, given that the potential health risk to consumers is attributed to the contamination of the sources. A simple, rapid and effective means of finding the residue is however required for household purposes. In recent years, the technique in association with surface-enhanced Raman scattering (SERS) has been well developed in particular for trace detection of target molecules. Herein, gold nanoparticles (Au NPs) were integrated with sol-gel spin-coated Zirconia nanofibers (ZrO₂ NFs) as a chemically stable substrate and used for SERS application. The morphologies of Au NPs/ZrO₂ NFs were adjusted by the precursor concentrations (_X, X = 0.05–0.5 M) and the effect of SERS on Au NPs/ZrO₂ NFs_X was evaluated by different Raman laser wavelengths using rhodamine 6G as the probe molecule at low concentrations. The target pesticides, phosmet (P1), carbaryl (C1), permethrin (P2) and cypermethrin (C2) were thereafter tested and analyzed. Au NPs/ZrO₂ NFs_0.3 exhibited an enhancement factor of 2.1 × 10⁷, which could detect P1, C1, P2 and C2 at the concentrations down to 10⁻⁸, 10⁻⁷, 10⁻⁷ and 10⁻⁶ M, respectively. High selectivity to the organophosphates was also found. As the pesticides were dip-coated on an apple and then measured on the diluted juice containing sliced apple peels, the characteristic peaks of each pesticide could be clearly identified. It is thus promising to use NPs/ZrO₂ NFs_0.3 as a novel SERS-active substrate for trace detection of pesticide residue upon, for example, fruits or vegetables.

Ultra-rapid catalytic degradation of 4-nitrophenol with ionic liquid recoverable and reusable ibuprofen derived silver nanoparticles

This study reports a one-pot and eco-friendly method for the synthesis of spherical ibuprofen derived silver nanoparticles (IBU-AgNPs) in aqueous media using ibuprofen analgesics drug as capping as well as reducing agent. Formation of AgNPs occurred within a few min (less than 5 min) at room temperature without resorting to any harsh conditions and hazardous organic solvents. Synthesized AgNPs were characterized with common analytical techniques. Transmission electron microscope (TEM) images confirmed the formation of spherical particles having a size distribution in the range of 12.5 ± 1.5 nm. Employment of IBU analgesic aided the control of better size distribution and prevented agglomeration of particles. Such AgNPs solution was highly stable for more than two months when stored at ambient temperature. The IBU-AgNPs solution showed excellent ultra-rapid catalytic activity for the complete degradation of toxic 4-nitrophenol (4-NPh) into non-toxic 4-aminophenol (4-APh) within 40 s. AgNPs were recovered with the help of water insoluble-room temperature ionic liquid and reused with enhanced catalytic potential. This method provides a novel, rapid and economical alternative for the treatment of toxic organic pollutants to maintain water quality and environmental safety against water pollution. It is extendable for the control of other reducible contaminants in water as well. Furthermore, this catalytic activity for an effective degradation of organic toxins is expected to play a crucial role for achieving the Sustainable Development Goal 6 set by United Nations.

Rationally Designed Graphene/Bilayer Silver/Cu Hybrid Structure with Improved Sensitivity and Stability for Highly Efficient SERS Sensing

A simple and cost-effective strategy was rationally designed to fabricate a special sandwich structure consisting of graphene, bilayer silver, and a copper plate, which was used as a surface-enhanced Raman scattering (SERS) substrate for highly efficient SERS sensing and detection of trace molecules. Silver dendrite (AgD) nanostructures were subsequently grown on a silver nanosphere (AgNS)/Cu surface to form a bilayer silver/Cu structure, which showed a 1.5-fold Raman enhancement compared to that of the AgNS/Cu substrate. After depositing graphene on the bilayer silver/Cu substrate to obtain a sandwich structure, a higher SERS enhancement and better durability were enabled. The SERS performances, measured by a portable Raman instrument, showed that the optimized sandwich structure substrate exhibited high SERS sensitivity to crystal violet (CV) and rhodamine 6G (R6G) with low limit of detection of 10^-9 and 10^-8 M, respectively. Such a sandwich-structured substrate exhibited good reproducibility across the entire detection areas with an average relative standard deviation less than 5.9%, which permits its reliable quantitative detection of CV and R6G molecules. In addition, graphene both effectively improved the SERS performances and protected Ag nanocrystals from oxidation, which endowed the sandwich structure a long-term stability with deviation of characteristic peaks' intensity lower than 3.6% after 25 days. This study indicates that the graphene/bilayer silver/Cu sandwich structure as a SERS substrate has a great potential in detecting environmental pollutants.

Facile On-Site Aqueous Pollutant Monitoring Using a Flexible, Ultralight, and Robust Surface-Enhanced Raman Spectroscopy Substrate: Interface Self-Assembly of Au@Ag Nanocubes on a Polyvinyl Chloride Template

Aquatic ecosystems and human health have been seriously threatened by illegal discharge of wastewater, while simple and effective monitoring methods are still sparse. Here, we propose a facile method for on-site pollutant monitoring by surface-enhanced Raman spectroscopy with a novel substrate. This substrate is fabricated by interface self-assembly of Au@Ag nanocubes (NCs) on a simultaneously formed polyvinyl chloride (PVC) template, followed by coating with a thin Au film. The Au@Ag@Au-NCs/PVC film is flexible, ultralight, and robust and could float on the surface of water and firmly contact with water even under harsh environmental conditions. Moreover, the Au@Ag@Au-NCs/PVC film is translucent, allowing penetration of laser beams and enhancement of Raman signals. When thiram was used as a model contaminant in aqueous solution, a good linear relationship ( R² = 0.972) was obtained over the range of 0.1-50 ppb with a detection limit of 0.1 ppb. Raman signals of thiram can be instantly and consecutively detected with the enhancement of the film in the simulated experiments, suggesting its possible use in the long run. Furthermore, the film can be easily regenerated by NaBH₄ solution washing, which could reduce the operating cost. In summary, the Au@Ag@Au-NCs/PVC film has great potential in on-site pollutant monitoring in aqueous environments with a portable Raman spectrometer.

Effect of Laser Irradiation on Cell Function and Its Implications in Raman Spectroscopy

Lasers are instrumental in advanced bioimaging and Raman spectroscopy. However, they are also well known for their destructive effects on living organisms, leading to concerns about the adverse effects of laser technologies. To implement Raman spectroscopy for cell analysis and manipulation, such as Raman-activated cell sorting, it is crucial to identify nondestructive conditions for living cells. Here, we evaluated quantitatively the effect of 532-nm laser irradiation on bacterial cell fate and growth at the single-cell level. Using a purpose-built microfluidic platform, we were able to quantify the growth characteristics, i.e., specific growth rates and lag times of individual cells, as well as the survival rate of a population in conjunction with Raman spectroscopy. Representative Gram-negative and Gram-positive species show similar trends in response to a laser irradiation dose. Laser irradiation could compromise the physiological function of cells, and the degree of destruction is both dose and strain dependent, ranging from reduced cell growth to a complete loss of cell metabolic activity and finally to physical disintegration. Gram-positive bacterial cells are more susceptible than Gram-negative bacterial strains to irradiation-induced damage. By directly correlating Raman acquisition with single-cell growth characteristics, we provide evidence of nondestructive characteristics of Raman spectroscopy on individual bacterial cells. However, while strong Raman signals can be obtained without causing cell death, the variety of responses from different strains and from individual cells justifies careful evaluation of Raman acquisition conditions if cell viability is critical.

IMPORTANCE In Raman spectroscopy, the use of powerful monochromatic light in laser-based systems facilitates the detection of inherently weak signals. This allows environmentally and clinically relevant microorganisms to be measured at the single-cell level. The significance of being able to perform Raman measurement is that, unlike label-based fluorescence techniques, it provides a “fingerprint” that is specific to the identity and state of any (unlabeled) sample. Thus, it has emerged as a powerful method for studying living cells under physiological and environmental conditions. However, the laser's high power also has the potential to kill bacteria, which leads to concerns. The research presented here is a quantitative evaluation that provides a generic platform and methodology to evaluate the effects of laser irradiation on individual bacterial cells. Furthermore, it illustrates this by determining the conditions required to nondestructively measure the spectra of representative bacteria from several different groups.

Silica-covered star-shaped Au-Ag nanoparticles as new electromagnetic nanoresonators for Raman characterisation of surfaces

One of the tools used for determining the composition of surfaces of various materials is shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). SHINERS is a modification of "standard" surface-enhanced Raman spectroscopy (SERS), in which, before Raman spectra are recorded, the surfaces analysed are covered with a layer of plasmonic nanoparticles protected by a very thin layer of a transparent dielectric. The plasmonic cores of the core-shell nanoparticles used in SHINERS measurements generate a local enhancement of the electric field of the incident electromagnetic radiation, whereas the transparent coatings prevent the metal cores from coming into direct contact with the material being analysed. In this contribution, we propose a new type of SHINERS nanoresonators that contain spiky, star-shaped metal cores (produced from a gold/silver alloy). These spiky, star-shaped Au-Ag nanoparticles have been covered by a layer of silica. The small radii of the ends of the tips of the spikes of these plasmonic nanostructures make it possible to generate a very large enhancement of the electromagnetic field there, with the result that such SHINERS nanoresonators are significantly more efficient than the standard semi-spherical nanostructures. The Au-Ag alloy nanoparticles were synthesised by the reduction of a solution containing silver nitrate and chloroauric acid by ascorbic acid. The final geometry of the nanostructures thus formed was controlled by changing the ratio between the concentrations of AuCl₄^- and Ag⁺ ions. The shape of the synthesised star-shaped Au-Ag nanoparticles does not change significantly during the two standard procedures for depositing a layer of silica (by the decomposition of sodium silicate or the decomposition of tetraethyl orthosilicate).

Nanoflowers: the future trend of nanotechnology for multi-applications

Nanoflowers are a newly developed class of nanoparticles showing structure similar to flower and gaining much attention due to their simple method of preparation, high stability and enhance efficiency. This article focuses on advantages, disadvantages, method of synthesis, types and applications of nanoflowers with futuristic approaches. The applications of nanoflower include its use as a biosensor for quick and precise detection of conditions like diabetes, Parkinsonism, Alzheimer, food infection, etc. Nanoflowers have been revealed for site-specific action and controlled delivery of drugs. The extended applications of nanoflowers cover purification of enzyme, removal of dye and heavy metal from water, gas-sensing using nickel oxide. Recent investigation shows 3 D structure of nanoflowers for enhancing surface sensitivity using Raman spectroscopy. This nanoflower system will act as a smart material in the near future due to high surface-to-volume ratio and enhance adsorption efficiency on its petals.

Poisson pre-processing of nonstationary photonic signals: Signals with equality between mean and variance

Photonic signals are broadly exploited in communication and sensing and they typically exhibit Poisson-like statistics. In a common scenario where the intensity of the photonic signals is low and one needs to remove a nonstationary trend of the signals for any further analysis, one faces an obstacle: due to the dependence between the mean and variance typical for a Poisson-like process, information about the trend remains in the variance even after the trend has been subtracted, possibly yielding artifactual results in further analyses. Commonly available detrending or normalizing methods cannot cope with this issue. To alleviate this issue we developed a suitable pre-processing method for the signals that originate from a Poisson-like process. In this paper, a Poisson pre-processing method for nonstationary time series with Poisson distribution is developed and tested on computer-generated model data and experimental data of chemiluminescence from human neutrophils and mung seeds. The presented method transforms a nonstationary Poisson signal into a stationary signal with a Poisson distribution while preserving the type of photocount distribution and phase-space structure of the signal. The importance of the suggested pre-processing method is shown in Fano factor and Hurst exponent analysis of both computer-generated model signals and experimental photonic signals. It is demonstrated that our pre-processing method is superior to standard detrending-based methods whenever further signal analysis is sensitive to variance of the signal.

Investigation of aromatic hydrocarbon inclusion into cyclodextrins by Raman spectroscopy and thermal analysis

Among various cavitand molecules, cyclodextrins are extensively studied due to their ability to form host-guest complexes with small hydrophobic molecules. Aiming to explore cyclodextrin implementation on the scopes related to the environmental pollution monitoring or remediation, extensive studies for understanding the cyclodextrin-based host-guest complex formation with selected targeted substances are conducted. In this context, two polycyclic aromatic hydrocarbons, naphthalene and fluoranthene as well as toluene as a member of volatile organic compounds, were studied regarding their ability to encapsulate into cyclodextrin cavities. Synthesised complexes were examined by thermogravimetric analysis combined with Raman spectroscopy. The obtained results demonstrated that the size between targeted molecules and the cyclodextrin cavities strongly correlates with its ability to engage in complexation. Thus, this latter parameter plays an important role in the inclusion complex formation as well as in the strength of the interaction between the molecules.

Giant Vesicles with Anchored Tiny Gold Nanowires: Fabrication and Surface-Enhanced Raman Scattering

Sensitivity and reproducibility are two major concerns to improve the performance and extend the range of practical applications of surface-enhanced Raman scattering (SERS). A theoretical report reveals that hot spots formed by gold nanoparticles with a tip-to-tip configuration would generate the maximum electric field enhancement because of the lightning rod effect. In our present study, we constructed a giant vesicle consisting of anchored tiny gold nanowires to provide a high density of sharp tip-to-tip nanogaps for SERS application. The tiny gold nanowires were directly grown and anchored onto the surfaces of polystyrene (PS) microspheres by a seed-mediated method. Then, the removal of PS microspheres by tetrahydrofuran led to the formation of the giant gold vesicles with hierarchical cage structures, providing the sharp tips and high density of hot spots for improving SERS performance. Compared with the nonwire structure (island and inhibited nanoparticle), giant gold vesicles with tiny wires showed a higher SERS enhancement factor (9.90 × 10⁷) and quantitative SERS analysis in the range of 10^-4 to 10^-7 M. In addition, the large-scale giant gold vesicle array on the silica substrate resulted in a high reproducibility of SERS signals with the variation of intensities less than 7.6%.

Sensitive and specific detection of explosives in solution and vapour by surface-enhanced Raman spectroscopy on silver nanocubes

Surface-enhanced Raman spectroscopy (SERS) has been widely utilised as a sensitive analytical technique for the detection of trace levels of organic molecules. The detection of organic compounds in the gas phase is particularly challenging due to the low concentration of adsorbed molecules on the surface of the SERS substrate. This is particularly the case for explosive materials, which typically have very low vapour pressures, limiting the use of SERS for their identification. In this work, silver nanocubes (AgNCs) were developed as a highly sensitive SERS substrate with very low limit-of-detection (LOD) for explosive materials down to the femtomolar (10^-15 M) range. Unlike typical gold-based nanostructures, the AgNCs were found suitable for the detection of both aromatic and aliphatic explosives, enabling detection with high specificity at low concentration. SERS studies were first carried out using a model analyte, Rhodamine-6G (Rh-6G), as a probe molecule. The SERS enhancement factor was estimated as 8.71 × 10¹⁰ in this case. Further studies involved femtomolar concentrations of 2,4-dinitrotoluene (DNT) and nanomolar concentrations of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), as well as vapour phase detection of DNT.

Three-Dimensional SERS Substrates Formed with Plasmonic Core-Satellite Nanostructures

We demonstrate three-dimensional surface-enhanced Raman spectroscopy (SERS) substrates formed by accumulating plasmonic nanostructures that are synthesized using a DNA-assisted assembly method. We densely immobilize Au nanoparticles (AuNPs) on polymer beads to form core-satellite nanostructures for detecting molecules by SERS. The experimental parameters affecting the AuNP immobilization, including salt concentration and the number ratio of the AuNPs to the polymer beads, are tested to achieve a high density of the immobilized AuNPs. To create electromagnetic hot spots for sensitive SERS sensing, we add a Ag shell to the AuNPs to reduce the interparticle distance further, and we carefully adjust the thickness of the shell to optimize the SERS effects. In addition, to obtain sensitive and reproducible SERS results, instead of using the core-satellite nanostructures dispersed in solution directly, we prepare SERS substrates consisting of closely packed nanostructures by drying nanostructure-containing droplets on hydrophobic surfaces. The densely distributed small and well-controlled nanogaps on the accumulated nanostructures function as three-dimensional SERS hot spots. Our results show that the SERS spectra obtained using the substrates are much stronger and more reproducible than that obtained using the nanostructures dispersed in solution. Sensitive detection of melamine and sodium thiocyanate (NaSCN) are achieved using the SERS substrates.

Nanostructured organic semiconductor films for molecular detection with surface-enhanced Raman spectroscopy

π-Conjugated organic semiconductors have been explored in several optoelectronic devices, yet their use in molecular detection as surface-enhanced Raman spectroscopy (SERS)-active platforms is unknown. Herein, we demonstrate that SERS-active, superhydrophobic and ivy-like nanostructured films of a molecular semiconductor, α,ω-diperfluorohexylquaterthiophene (DFH-4T), can be easily fabricated by vapour deposition. DFH-4T films without any additional plasmonic layer exhibit unprecedented Raman signal enhancements up to 3.4 × 10³ for the probe molecule methylene blue. The combination of quantum mechanical computations, comparative experiments with a fluorocarbon-free α,ω-dihexylquaterthiophene (DH-4T), and thin-film microstructural analysis demonstrates the fundamental roles of the π-conjugated core fluorocarbon substitution and the unique DFH-4T film morphology governing the SERS response. Furthermore, Raman signal enhancements up to ∼10¹⁰ and sub-zeptomole (<10^-21 mole) analyte detection were accomplished by coating the DFH-4T films with a thin gold layer. Our results offer important guidance for the molecular design of SERS-active organic semiconductors and easily fabricable SERS platforms for ultrasensitive trace analysis.

Substrate Oxide Layer Thickness Optimization for a Dual-Width Plasmonic Grating for Surface-Enhanced Raman Spectroscopy (SERS) Biosensor Applications

This work investigates a new design for a plasmonic SERS biosensor via computational electromagnetic models. It utilizes a dual-width plasmonic grating design, which has two different metallic widths per grating period. These types of plasmonic gratings have shown larger optical enhancement than standard single-width gratings. The new structures have additional increased enhancement when the spacing between the metal decreases to sub-10 nm dimensions. This work integrates an oxide layer to improve the enhancement even further by carefully studying the effects of the substrate oxide thickness on the enhancement and reports ideal substrate parameters. The combined effects of varying the substrate and the grating geometry are studied to fully optimize the device’s enhancement for SERS biosensing and other plasmonic applications. The work reports the ideal widths and substrate thickness for both a standard and a dual-width plasmonic grating SERS biosensor. The ideal geometry, comprising a dual-width grating structure atop an optimal SiO₂ layer thickness, improves the enhancement by 800%, as compared to non-optimized structures with a single-width grating and a non-optimal oxide thickness.

Graphene Oxide Nanoprisms for Sensitive Detection of Environmentally Important Aromatic Compounds with SERS

Recent advances in graphene-based sensors have shown that heavily oxidized (GO) and reduced graphene oxide (rGO) are attractive materials for environmental sensing due to their unique chemical and physical properties. We describe here the fabrication of nanostructured GO assemblies with Ag nanoprisms for improved detection with surface enhanced Raman scattering (SERS). Specifically, 100-μm-sized, periodic-nanoprism-array domains were fabricated on top of the GO layers by GO-assisted lithography (GOAL). The atomically thin GO underlayers are shown to attract cyclic aromatic molecules to the surface, likely via π-π stacking interactions. The close proximity of the analyte to GO and nanoprism (NP) tips effectively suppresses fluorescent background and affords a plausible tertiary enhancement of photon emissions via an electron charge transfer (CT) process. The adsorption of analyte to rGO-NP leads to the appearance and/or shift of several Raman bands, which provided a means to gain molecular insights into the graphene-enhanced scattering process. The analytical merits were characterized with model compound Rhodamine 6G, where the detection limit could reach subnanomolar concentrations. The nanoprism GO substrates also prove effective for SERS multiplex measurement of several legacy aromatic pollutants. Three tetrachlorobiphenyl isomers could be identified from a mixture using their autonomous nonoverlapping molecular fingerprints, and the substrate offers remarkable trace detection of 2,2',3,3'-tetrachlorobiphenyl (PCB-77).

Uniform Microgels Containing Agglomerates of Silver Nanocubes for Molecular Size-Selectivity and High SERS Activity

Surface-enhanced Raman scattering (SERS) is a promising technique for molecular analysis as the molecular fingerprints (Raman spectra) are amplified to detectable levels compared with common spectroscopy. Metal nanostructures localize electromagnetic field on their surfaces, which can lead to dramatic increase of Raman intensity of molecules adsorbed. However, the metal surfaces are prone to contamination, thereby requiring pretreatment of samples to remove adhesive molecules. To avoid the pretreatment and potentially achieve point-of-care (POC) analysis, we have developed SERS-active microgels using the droplet-microfluidic system. As the microgels are composed of water-swollen network with consistent mesh size, they selectively allow diffusion of molecules smaller than the mesh, thereby excluding large adhesives. To render the microgels highly SERS-active, we destabilize silver nanocubes to form agglomerates, which are embedded in the matrix of microgels. The nanogaps in the agglomerates provide high sensitivity in Raman measurement and size-selective permeability of the microgel matrix obviates the pretreatment of samples. To validate the functions, we demonstrate the direct detection of Aspirin dissolved in whole blood without any pretreatment.

Identification of Al13 on the Colloid Surface Using Surface-Enhanced Raman Spectroscopy

Al₁₃ is the most active polymeric Al species responsible for coagulation at the solid-liquid interface, whereas the detection techniques for Al₁₃ at the interface are currently limited. In this study, for the first time, the identification of Al₁₃ on the silicon dioxide-based colloid surface was realized by using surface-enhanced Raman scattering (SERS), which is an ideal surface method sensitive for single-molecule detection. The high purity Al₁₃ salts were prepared by an electrolysis procedure followed by precipitation or metathesis. Al₁₃-Cl_n was determined to be feasible for the Raman detection as it exhibited more noticeable signals in comparison to Al₁₃-(SO₄)_p and Al₁₃-(NO₃)_m. The peak of Al₁₃-Cl_n at 635 cm^-1 could be the major characteristic peak of Al₁₃, and the other two peaks at 300 and 987 cm^-1 could be accessorial evidence for the identification. Further, the identification of Al₁₃ adsorbed on the surface of Ag and gold-core/silica-shell colloids was confirmed by the SERS response at the above three wavenumbers with a higher signal-to-noise ratio than the normal Raman scattering. According to the least-squares fitting computed Raman spectra, each of the characteristic peaks was associated with specific vibrational modes.

Spatial Mapping of Pyocyanin in Pseudomonas Aeruginosa Bacterial Communities Using Surface Enhanced Raman Scattering

Surface enhanced Raman spectroscopy (SERS) imaging was used in conjunction with principal component analysis (PCA) for the in situ spatiotemporal mapping of the virulence factor pyocyanin in communities of the pathogenic bacterium Pseudomonas aeruginosa. The combination of SERS imaging and PCA analysis provides a robust method for the characterization of heterogeneous biological systems while circumventing issues associated with interference from sample autofluorescence and low reproducibility of SERS signals. The production of pyocyanin is found to depend both on the growth carbon source and on the specific strain of P. aeruginosa studied. A cystic fibrosis lung isolate strain of P. aeruginosa synthesizes and secretes pyocyanin when grown with glucose and glutamate, while the laboratory strain exhibits detectable production of pyocyanin only when grown with glutamate as the source of carbon. Pyocyanin production in the laboratory strain grown with glucose was below the limit of detection of SERS. In addition, the combination of SERS imaging and PCA can elucidate subtle differences in the molecular composition of biofilms. PCA loading plots from the clinical isolate exhibit features corresponding to vibrational bands of carbohydrates, which represent the mucoid biofilm matrix specific to that isolate, features that are not seen in the PCA loading plots of the laboratory strain.

Chemical Sensing on a Single SERS Particle

We report a new chemical sensing platform on a single surface-enhanced Raman scattering (SERS) particle. A cabbage-like Au microparticle (CLMP) with high SERS enhancement was applied as an ultrasensitive SERS substrate. A new Raman reporter bis[4,4'-[dithiodiphenyl azo-phenol] (DTDPAP) was synthesized to display multiple fingerprints and high reactivity toward sodium dithionite. The reaction of DTDPAP with sodium dithionite was in situ monitored by SERS on a single CLMP. The DTDPAP fingerprint change is dependent on the sodium dithionite concentration, providing a simple and sensitive method for sodium dithionite profiling.

Multi-functional, thiophenol-based surface chemistry for surface-enhanced Raman spectroscopy

This article highlights the recent advances of thiophenol-based surface chemistry for the applications in surface-enhanced Raman spectroscopy (SERS).

Formation Regularities of Plasmonic Silver Nanostructures on Porous Silicon for Effective Surface-Enhanced Raman Scattering

Plasmonic nanostructures demonstrating an activity in the surface-enhanced Raman scattering (SERS) spectroscopy have been fabricated by an immersion deposition of silver nanoparticles from silver salt solution on mesoporous silicon (meso-PS). The SERS signal intensity has been found to follow the periodical repacking of the silver nanoparticles, which grow according to the Volmer-Weber mechanism. The ratio of silver salt concentration and immersion time substantially manages the SERS intensity. It has been established that optimal conditions of nanostructured silver layers formation for a maximal Raman enhancement can be chosen taking into account a special parameter called effective time: a product of the silver salt concentration on the immersion deposition time. The detection limit for porphyrin molecules CuTMPyP4 adsorbed on the silvered PS has been evaluated as 10(-11) M.

Recent advances in M13 bacteriophage-based optical sensing applications

Recently, M13 bacteriophage has started to be widely used as a functional nanomaterial for various electrical, chemical, or optical applications, such as battery components, photovoltaic cells, sensors, and optics. In addition, the use of M13 bacteriophage has expanded into novel research, such as exciton transporting. In these applications, the versatility of M13 phage is a result of its nontoxic, self-assembling, and specific binding properties. For these reasons, M13 phage is the most powerful candidate as a receptor for transducing chemical or optical phenomena of various analytes into electrical or optical signal. In this review, we will overview the recent progress in optical sensing applications of M13 phage. The structural and functional characters of M13 phage will be described and the recent results in optical sensing application using fluorescence, surface plasmon resonance, Förster resonance energy transfer, and surface enhanced Raman scattering will be outlined.

Highly stable SERS pH nanoprobes produced by co-solvent controlled AuNP aggregation

Production of gold nanoparticle (AuNP) surface-enhanced Raman spectroscopy (SERS) nanoprobes requires replicable aggregation to produce multimers with high signal intensity. Herein, we illustrate a novel, yet simple, approach to produce SERS nanoprobes through control of co-solvent composition. AuNP multimers were produced by mixing AuNP monomers in water : ethanol co-solvent for variable periods of time. By varying the water : ethanol ratio and the amount of 4-mercaptobenzoic acid (4-MBA) present, the aggregation rate can be systematically controlled. Thiolated poly(ethylene glycol) was then added to halt the aggregation process and provide steric stability. This approach was used to produce pH nanoprobes with excellent colloidal stability in high ionic strength environments and in complex samples. The pH probe exhibits broad pH sensitivity over the range 6-11 and we calculate that a single AuNP dimer in a 35 fL volume is sufficient to generate a detectable SERS signal. As a proof-of-concept, the probes were used to detect the intracellular pH of human prostate cancer cells (PC-3). The internalized probes exhibit a strong 4-MBA signal without any interfering bands from either the cells or the culture media and produce exceptionally detailed pH maps. pH maps obtained from 19 xy surface scans and 14 yz depth scans exhibit highly consistent intracellular pH in the range of 5 to 7, thus indicating the greater reliability and reproducibility of our pH probes compared with other probes previously reported in the literature. Our water : ethanol co-solvent production process is fast, simple, and efficient. Adjustment of solvent composition may become a powerful way to produce SERS tags or nanoprobes in the future.