Cellulose nanomaterials in water treatment technologies

Sustainable Removal of Contaminants by Biopolymers: A Novel Approach for Wastewater Treatment. Current State and Future Perspectives

Naturally occurring substances or polymeric biomolecules synthesized by living organisms during their entire life cycle are commonly defined as biopolymers. Different classifications of biopolymers have been proposed, focusing on their monomeric units, thus allowing them to be distinguished into three different classes with a huge diversity of secondary structures. Due to their ability to be easily manipulated and modified, their versatility, and their sustainability, biopolymers have been proposed in different fields of interest, starting from food, pharmaceutical, and biomedical industries, (i.e., as excipients, gelling agents, stabilizers, or thickeners). Furthermore, due to their sustainable and renewable features, their biodegradability, and their non-toxicity, biopolymers have also been proposed in wastewater treatment, in combination with different reinforcing materials (natural fibers, inorganic micro- or nano-sized fillers, antioxidants, and pigments) toward the development of novel composites with improved properties. On the other hand, the improper or illegal emission of untreated industrial, agricultural, and household wastewater containing a variety of organic and inorganic pollutants represents a great risk to aquatic systems, with a negative impact due to their high toxicity. Among the remediation techniques, adsorption is widely used and documented for its efficiency, intrinsic simplicity, and low cost. Biopolymers represent promising and challenging adsorbents for aquatic environments’ decontamination from organic and inorganic pollutants, allowing for protection of the environment and living organisms. This review summarizes the results obtained in recent years from the sustainable removal of contaminants by biopolymers, trying to identify open questions and future perspectives to overcome the present gaps and limitations.

Systematic comparison for effects of different scale mechanical-NaOH coupling treatments on lignocellulosic components, micromorphology and cellulose crystal structure of wheat straw

In order to compare the effect of different mechanical-chemical coupling treatment on wheat straw and provide guidance for the subsequent preparation of cellulose nanomaterials, this paper systematically explored the impact of different scale mechanical fragmentation coupling various NaOH concentration treatment on the lignocellulosic components, micromorphology and cellulose crystal structure of wheat straw. The results showed that the relationship between hemicellulose and lignin removal with NaOH concentration can be expressed as exponential function Y = a_i(1-exp(-b_iX)), and micro-nano-scale ball-milling coupling NaOH treatment can facilitate the removal of hemicellulose and lignin. Micromorphology analysis found that wet ball milling coupling NaOH one-step treatment can disintegrate cellulose fiber into crosslinked network structure of cellulose microfibrils. XRD results indicated that wet ball milling with NaOH solution was contributed to retaining cellulose crystal structure and conducive to cellulose crystalline transformation. In conclusion, wet ball milling coupling NaOH simultaneous treatment can be a promising pretreatment for cellulose nanomaterials preparation.

Incorporation of Cellulose Nanocrystals into Graphene Oxide Membranes for Efficient Antibiotic Removal at High Nutrient Recovery

Two-dimensional (2D) material-based membranes hold great promise in wastewater treatment. However, it remains challenging to achieve highly efficient and precise small molecule/ion separation with pure 2D material-fabricated lamellar membranes. In this work, laminated graphene oxide (GO)-cellulose nanocrystal (CNC) hybrid membranes (GO/CNC) were fabricated by taking advantages of the unique structures and synergistic effects generated from these two materials. The characterization results in physiochemical properties, and the structure of the as-synthesized hybrid membranes displayed enhanced membrane surface hydrophilicity, enhanced crumpling surface structure, and slightly enlarged interlayer-spacing with the incorporation of CNCs. Water permeability increases by two to four times with the addition of different CNC weight ratios in comparison to a pristine GO membrane. The optimal GO/CNC membrane achieved efficient rejection toward three typical antibiotics at 74.8, 90.9, and 97.2% for sulfamethoxazole (SMX), levofloxacin (Levo), and norfloxacin (Nor), respectively, while allowing a high passage of desirable nutrients such as NO₃^- and H₂PO₄^-. It was found that SMX removal is primarily governed by electrostatic repulsion, while adsorption plays a crucial role in removing Levo and Nor. Moreover, the density functional theory calculations confirmed the increased antibiotic removal in the presence of an organic foulant, humic acid. Such a 2D material-based hybrid membrane offers a new strategy to develop fit-for purpose membranes for resource recovery and water separation.

Recent Advances in the Synthesis of Nanocellulose Functionalized–Hybrid Membranes and Application in Water Quality Improvement

The increasing discharge of voluminous non or partially treated wastewaters characterized by complex contaminants poses significant ecological and health risks. Particularly, this practice impacts negatively on socio-economic, technological, industrial, and agricultural development. Therefore, effective control of water pollution is imperative. Over the past decade, membrane filtration has been established as an effective and commercially attractive technology for the separation and purification of water. The performance of membrane-based technologies relies on the intrinsic properties of the membrane barrier itself. As a result, the development of innovative techniques for the preparation of highly efficient membranes has received remarkable attention. Moreover, growing concerns related to cost-effective and greener technologies have induced the need for eco-friendly, renewable, biodegradable, and sustainable source materials for membrane fabrication. Recently, advances in nanotechnology have led to the development of new high-tech nanomaterials from natural polymers (e.g., cellulose) for the preparation of environmentally benign nanocomposite membranes. The synthesis of nanocomposite membranes using nanocelluloses (NCs) has become a prominent research field. This is attributed to the exceptional characteristics of these nanomaterials (NMs) namely; excellent and tuneable surface chemistry, high mechanical strength, low-cost, biodegradability, biocompatibility, and renewability. For this purpose, the current paper opens with a comprehensive yet concise description of the various types of NCs and their most broadly utilized production techniques. This is closely followed by a critical review of how NC substrates and their surface-modified versions affect the performance of the fabricated NC-based membranes in various filtration processes. Finally, the most recent processing technologies for the preparation of functionalized NCs-based composite membranes are discussed in detail and their hybrid characteristics relevant to membrane filtration processes are highlighted.

The Efficient Removal of Methylene Blue Dye Using CuO/PET Nanocomposite in Aqueous Solutions

The present research investigates the application of the green method to produce nanocomposites. The CuO/PET fiber nanocomposite can be prepared in two ways. The first way involves the application of the electrospinning technique by which waste plastic cups of polyethylene terephthalate (PET) are converted into nanofibers. In the second way, the copper nanoparticle (CuONPs) is synthesized with the natural capped plant extract of sumac (Rhus Coriaria L., family Anacardiaceae) and the CuONPs are then combined as a filler with the PET nanofiber using a cross-linked solvent. The X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersion spectroscopy (EDS), and map elements distribution can be applied to investigate the surface modification and alteration of the composite nanofiber morphology. The collected data show that the produced CuO/PET nanocomposites have a high surface area, well distribution of elements, magnificent shape, and stable dispersion state. Furthermore, the CuO/PET nanocomposites are considered as an efficient photocatalytic removal of the toxic methylene blue dye (MB) in aqueous solutions. The results of the present study demonstrate that the photocatalytic efficiency for removing MB dye is achieved in a short time using a low-intensity irradiation ultraviolet light.

Unveiling Modifications of Biomass Polysaccharides during Thermal Treatment in Cholinium Chloride : Lactic Acid Deep Eutectic Solvent

A deep analysis upon the chemical modifications of the cellulose and hemicelluloses fractions that take place during biomass delignification with deep eutectic solvents (DES) is lacking in literature, being this a critical issue given the continued research on DES for this purpose. This work intends to fill this gap by disclosing a comprehensive study on the chemical modifications of cellulose (microcrystalline cellulose and bleached kraft pulp) and hemicelluloses (xylans) during thermal treatment (130 °C) with cholinium chloride/lactic acid ([Ch]Cl/LA) at molar ratio 1 : 10, one of the best reported DES for biomass delignification. The obtained data revealed that [Ch]Cl/LA (1 : 10) has a negative impact on the polysaccharides fractions at prolonged treatments (>4 h), resulting on substantial modifications including the esterification of cellulose with lactic acid, shortening of fibers length, fibers agglomeration and side reactions of the hemicelluloses fraction (e. g., humin formation, lactic acid grafting). Wood delignification trials with [Ch]Cl/LA (1 : 10) at the same conditions also corroborate these findings. Moreover, the DES suffers degradation, including the formation of lactic acid derivatives and its polymerization. Therefore, short time delignification treatments are strongly recommended when using the [Ch]Cl/LA DES, so that a sustainable fractionation of biomass into high quality cellulose fibers, isolated lignin, and xylose/furfural co-production along with solvent recyclability could be achieved.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

2D and 3D Bulk Materials for Environmental Remediation: Air Filtration and Oil/Water Separation

Air and water pollution pose an enormous threat to human health and ecosystems. In particular, particulate matter (PM) and oily wastewater can cause serious environmental and health concerns. Thus, controlling PM and oily wastewater has been a great challenge. Various techniques have been reported to effectively remove PM particles and purify oily wastewater. In this article, we provide a review of the recent advancements in air filtration and oil/water separation using two- and three-dimensional (2D and 3D) bulk materials. Our review covers the advantages, characteristics, limitations, and challenges of air filters and oil/water separators using 2D and 3D bulk materials. In each section, we present representative works in detail and describe the concepts, backgrounds, employed materials, fabrication methods, and characteristics of 2D and 3D bulk material-based air filters and oil/water separators. Finally, the challenges, technical problems, and future research directions are briefly discussed for each section.

High-performance nanofiltration membranes with a sandwiched layer and a surface layer for desalination and environmental pollutant removal

To overcome the permeability-selectivity limitation and improve the performance of desalination membranes, novel methods and design strategies are needed to prepare new types of thin film composite (TFC) nanofiltration (NF) membranes. In this work, a modified TFC membrane with a sandwiched layer and a surface layer was fabricated through a facile additional two-step approach. The microfiltration (MF) substrate and TFC surface were modified by a cellulose nanocrystal (CNC) sandwiched layer and a polydopamine (PDA) layer, respectively. Scanning electron microscopy (SEM) analysis indicated that the support modified by CNCs presented a more homogeneous surface than the control TFC. Cross-sectional SEM images showed that the underneath MF support, CNC interlayer, polyamide layer and PDA deposition layer were perfectly integrated. The surface charge was determined by an electrophoretic analyzer and revealed that the CNC interlayer increased the membrane electronegativity, while the PDA layer presented the opposite effect. Compared to the control TFC membrane, the solute permeability and rejection of the resultant CNC-TFC-PDA membrane were simultaneously increased, indicating a breakthrough in the trade-off limitation. The modified membranes exhibited a high removal rate for Congo red, Rose Bengal, sodium lignosulfonate and alkaline lignin, suggesting their excellent rejection performance for textile dyes and lignin derivatives. Fouling tests indicated that both the interlayer and surface layer exhibited positive effects on fouling alleviation. The effects of each functional layer were explored, and the main factors for performance improvement, including the modified hydrophilicity, surface charge, pore size and surface roughness, were discussed.

Growing Pd NPs on cellulose microspheres via in-situ reduction for catalytic decolorization of methylene blue

Dyeing industry highly contributes to environmental pollution and this needs to be addressed on priority. Pd NPs/CMs, a highly efficient and reusable catalyst for methylene blue (MB) decolorization, were fabricated by in-situ reduction method based on the cellulose microspheres (CMs). Pd NPs/CMs were characterized for the structure and catalytic performance by spectroscopic techniques such as SEM, EDS, XRD, IR, XPS, porosity, zeta potential, MS, and UV-visible spectroscopy, which all demonstrated that Pd NPs were distributed on the cellulose microspheres uniformly and exhibited excellent catalytic performances to decolorize a model organic dye MB in the presence of NaBH₄ with catalytic efficiency higher than 99.8%. More importantly, Pd NPs/CMs were proven to show excellent reusability for at least five cycles. Decolorization mechanism of MB, via the destruction of the chromophores (CN and S) of MB, was established with the help of MS combined with IR and XPS. Blank experiments using pure cellulose microspheres were carried out simultaneously to estimate the level of catalytic capacity achieved to Pd NPs/CMs. These materials proved themselves having great potential in large scale applications to treat dye-containing wastewater.

Suitability of a Cellulose-Based Nanomaterial for the Remediation of Heavy Metal Contaminated Freshwaters: A Case-Study Showing the Recovery of Cadmium Induced DNA Integrity Loss, Cell Proliferation Increase, Nuclear Morphology and Chromosomal Alterations on Dreissena polymorpha

The contamination of freshwaters by heavy metals represents a great problem, posing a threat for human and environmental health. Cadmium is classified as carcinogen to humans and its mechanism of carcinogenicity includes genotoxic events. In this study a recently developed eco-friendly cellulose-based nanosponge (CNS) was investigated as a candidate in freshwater nano-remediation process. For this purpose, CdCl₂ (0.05 mg L⁻¹) contaminated artificial freshwater (AFW) was treated with CNS (1.25 g L⁻¹ for 2 h), and cellular responses were analyzed before and after CNS treatment in Dreissena polymorpha hemocytes. A control group (AFW) and a negative control group (CNS in AFW) were also tested. DNA primary damage was evaluated by Comet assay while chromosomal damage and cell proliferation were assessed by Cytome assay. AFW exposed to CNS did not cause any genotoxic effect in zebra mussel hemocytes. Moreover, DNA damage and cell proliferation induced by Cd(II) turned down to control level after 2 days when CNS were used. A reduction of Cd(II)-induced micronuclei and nuclear abnormalities was also observed. CNS was thus found to be a safe and effective candidate in cadmium remediation process being efficient in metal sequestering, restoring cellular damage exerted by Cd(II) exposure, without altering cellular physiological activity.

A nanocomposite paper comprising calcium silicate hydrate nanosheets and cellulose nanofibers for high-performance water purification

Removal of soluble organic and inorganic contaminants from wastewater to produce clean water has received much attention recently. However, the simultaneous enhancement of water permeability and removal efficiency is still a challenge for filtration membranes. Here, we present a new kind of nanocomposite paper (CSH/CNF) consisting of calcium silicate hydrate (CSH) nanosheets and cellulose nanofibers (CNFs), and demonstrate the rapid water filtration and highly efficient contaminant (e.g., dyes, proteins, and metal ions) adsorption properties. The CNFs can serve as the bridging material to connect the CSH nanosheets to form a porous network structure and vital channels in the CSH/CNF paper for rapid water transportation. The weight ratio of CSH nanosheets in the paper is up to 75–85%. The weight ratio of CSH nanosheets has a significant effect on the water permeability and removal efficiency. The water permeability of the CSH/CNF paper with 82.5 wt% CSH nanosheets reaches as high as 312.7 L m⁻² h⁻¹ bar⁻¹, which is about 14.7 times that of the CSH/CNF paper with 75 wt% CSH nanosheets. Because of the high specific surface area and abundant adsorption sites of CSH nanosheets, the CSH/CNF paper with 82.5 wt% CSH nanosheets exhibits high adsorption capacities and removal efficiencies for methyl blue (242.6 mg g⁻¹, 97.3%), bovine serum albumin (289.2 mg g⁻¹, 98.5%) and Pb²⁺ ions (366.2 mg g⁻¹, 98.2%). The CSH/CNF nanocomposite paper holds great potential for application in environmental wastewater purification.

A nanocomposite paper with high water permeability and removal efficiency was prepared for the removal of organic and inorganic contaminants by filtration.

Nanostructured Cellulose-Based Sorbent Materials for Water Decontamination from Organic Dyes

Nanostructured materials have been recently proposed in the field of environmental remediation. The use of nanomaterials as building blocks for the design of nano-porous micro-dimensional systems is particularly promising since it can overcome the (eco-)toxicological risks associated with the use of nano-sized technologies. Following this approach, we report here the application of a nanostructured cellulose-based material as sorbent for effective removal of organic dyes from water. It consists of a micro- and nano-porous sponge-like system derived by thermal cross-linking among (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNF), branched polyethylenimine 25 kDa (bPEI), and citric acid (CA). The sorbent efficiency was tested for four different organic dyes commonly used for fabric printing (Naphthol Blue Black, Orange II Sodium Salt, Brilliant Blue R, Cibacron Brilliant Yellow), by conducting both thermodynamic and kinetic studies. The material performance was compared with that of an activated carbon, commonly used for this application, in order to highlight the potentialities and limits of this biomass-based new material. The possibility of regeneration and reuse of the sorbent was also investigated.

Biopolymeric Membrane Enriched with Chitosan and Silver for Metallic Ions Removal

The present paper synthesized, characterized, and evaluated the performance of the novel biopolymeric membrane enriched with cellulose acetate and chitosan (CHI)-silver (Ag) ions in order to remove iron ion from the synthetic wastewater using a new electrodialysis system. The prepared membranes were characterized by Fourier Transforms Infrared Spectroscopy-Attenuated Total Reflection (FTIR-ATR), Thermal Gravimetric Analysis (TGA) and Differential Thermal Analysis (DSC), contact angle measurements, microscopy studies, and electrochemical impedance spectroscopy (EIS). The electrodialysis experiments were performed at the different applied voltages (5, 10, and 15 V) for one hour, at room temperature. The treatment rate (T_E) of iron ions, current efficiency (I_E), and energy consumption (W_c) were calculated. FTIR-ATR spectra evidenced that incorporation of CHI-Ag ions into the polymer mixture led to a polymer-metal ion complex formation within the membrane. The TGA-DSC analysis for the obtained biopolymeric membranes showed excellent thermal stability (>350 °C). The contact angle measurements demonstrated the hydrophobic character of the polymeric membrane and a decrease of it by CHI-Ag adding. The EIS results indicated that the silver ions induced a higher ionic electrical conductivity. The highest value of the iron ions treatment rate (>60%) was obtained for the biopolymeric membrane with CHI-Ag ions at applied voltage of 15 V.

Nanoconfinement-Mediated Water Treatment: From Fundamental to Application

Safe and clean water is of pivotal importance to all living species and the ecosystem on earth. However, the accelerating economy and industrialization of mankind generate water pollutants with much larger quantity and higher complexity than ever before, challenging the efficacy of traditional water treatment technologies. The flourishing researches on nanomaterials and nanotechnologies in the past decade have generated new understandings on many fundamental processes and brought revolutionary upgrades to various traditional technologies in almost all areas, including water treatment. An indispensable step toward the real application of nanomaterials in water treatment is to confine them in large processable substrate to address various inherent issues, such as spontaneous aggregation, difficult operation and potential environmental risks. Strikingly, when the size of the spatial restriction provided by the substrate is on the order of only one or several nanometers, referred to as nanoconfinement, the phase behavior of matter and the energy diagram of a chemical reaction could be utterly changed. Nevertheless, the relationship between such changes under nanoconfinement and their implications for water treatment is rarely elucidated systematically. In this Critical Review, we will briefly summarize the current state-of-the-art of the nanomaterials, as well as the nanoconfined analogues (i.e., nanocomposites) developed for water treatment. Afterward, we will put emphasis on the effects of nanoconfinement from three aspects, that is, on the structure and behavior of water molecules, on the formation (e.g., crystallization) of confined nanomaterials, and on the nanoenabled chemical reactions. For each aspect, we will build the correlation between the nanoconfinement effects and the current studies for water treatment. More importantly, we will make proposals for future studies based on the missing links between some of the nanoconfinement effects and the water treatment technologies. Through this Critical Review, we aim to raise the research attention on using nanoconfinement as a fundamental guide or even tool to advance water treatment technologies.

Adhesion and Stability of Nanocellulose Coatings on Flat Polymer Films and Textiles

Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings’ adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.

Effect-Based Approach to Assess Nanostructured Cellulose Sponge Removal Efficacy of Zinc Ions from Seawater to Prevent Ecological Risks

To encourage the applicability of nano-adsorbent materials for heavy metal ion removal from seawater and limit any potential side effects for marine organisms, an ecotoxicological evaluation based on a biological effect-based approach is presented. ZnCl2 (10 mg L-1) contaminated artificial seawater (ASW) was treated with newly developed eco-friendly cellulose-based nanosponges (CNS) (1.25 g L-1 for 2 h), and the cellular and tissue responses of marine mussel Mytilus galloprovincialis were measured before and after CNS treatment. A control group (ASW only) and a negative control group (CNS in ASW) were also tested. Methods: A significant recovery of Zn-induced damages in circulating immune and gill cells and mantle edges was observed in mussels exposed after CNS treatment. Genetic and chromosomal damages reversed to control levels in mussels' gill cells (DNA integrity level, nuclear abnormalities and apoptotic cells) and hemocytes (micronuclei), in which a recovery of lysosomal membrane stability (LMS) was also observed. Damage to syphons, loss of cilia by mantle edge epithelial cells and an increase in mucous cells in ZnCl2-exposed mussels were absent in specimens after CNS treatment, in which the mantle histology resembled that of the controls. No effects were observed in mussels exposed to CNS alone. As further proof of CNS' ability to remove Zn(II) from ASW, a significant reduction of >90% of Zn levels in ASW after CNS treatment was observed (from 6.006 to 0.510 mg L-1). Ecotoxicological evaluation confirmed the ability of CNS to remove Zn from ASW by showing a full recovery of Zn-induced toxicological responses to the levels of mussels exposed to ASW only (controls). An effect-based approach was thus proven to be useful in order to further support the environmentally safe (ecosafety) application of CNS for heavy metal removal from seawater.

Clean Water through Nanotechnology: Needs, Gaps, and Fulfillment

Sustainable nanotechnology has made substantial contributions in providing contaminant-free water to humanity. In this Review, we present the compelling need for providing access to clean water through nanotechnology-enabled solutions and the large disparities in ensuring their implementation. We also discuss the current nanotechnology frontiers in diverse areas of the clean water space with an emphasis on applications in the field and provide suggestions for future research. Extending the vision of sustainable and affordable clean water to environment in general, we note that cities can live and breathe well by adopting such technologies. By understanding the global environmental challenges and exploring remedies from emerging nanotechnologies, sustainability in clean water can be realized. We suggest specific pointers and quantify the impact of such technologies.

Bottom-up assembly of nanocellulose structures

Nanocelluloses, both cellulose nanofibrils and cellulose nanocrystals, are gaining research traction due to their viability as key components in commercial applications and industrial processes. Significant efforts have been made to understand both the potential of assembling nanocelluloses, and the limits and prospectives of the resulting structures. This Review focuses on bottom-up techniques used to prepare nanocellulose-only structures, and details the intermolecular and surface forces driving their assembly. Additionally, the interactions that contribute to their structural integrity are discussed along with alternate pathways and suggestions for improved properties. Six categories of nanocellulose structures are presented: (1) powders, beads, and droplets; (2) capsules; (3) continuous fibres; (4) films; (5) hydrogels; and (6) aerogels and dried foams. Although research on nanocellulose assembly often focuses on fundamental science, this Review also provides insight on the potential utilization of such structures in a wide array of applications.

Synthesis and SERS application of gold and iron oxide functionalized bacterial cellulose nanocrystals (Au@Fe3O4@BCNCs)

Bacterial cellulose nanocrystals (BCNCs) are biocompatible cellulose nanomaterials that can host guest nanoparticles to form hybrid nanocomposites with a wide range of applications. Herein, we report the synthesis of a hybrid nanocomposite that consists of plasmonic gold nanoparticles (AuNPs) and superparamagnetic iron oxide (Fe3O4) nanoparticles supported on BCNCs. As a proof of concept, the hybrid nanocomposites were employed to isolate and detect malachite green isothiocyanate (MGITC) via magnetic separation and surface-enhanced Raman scattering (SERS). Different initial gold precursor (Au3+) concentrations altered the size and morphology of the AuNPs formed on the nanocomposites. The use of 5 and 10 mM Au3+ led to a heterogenous mix of spherical and nanoplate AuNPs with increased SERS enhancements, as compared to the more uniform AuNPs formed using 1 mM Au3+. Rapid and sensitive detection of MGITC at concentrations as low as 10-10 M was achieved. The SERS intensity of the normalized Raman peak at 1175 cm-1 exhibited a log-linear relationship for MGITC concentrations between 2 × 10-10 and 2 × 10-5 M for Au@Fe3O4@BCNCs. These results suggest the potential of these hybrid nanocomposites for application in a broad range of analyte detection strategies.

Selective Isolation Methods for Cellulose and Chitin Nanocrystals

This Minireview focuses on the selective isolation methods for the preparation of cellulose nanocrystals (CNCs) and chitin nanocrystals (ChNCs). Various selective preparation strategies with specific preparation conditions and reaction mechanisms are summarized. In particular, these selective reaction routes include controlled acid hydrolysis and selective oxidations at specific positions of cellulose or chitin fibers as well as particular reaction sites of the repeating monosaccharide building blocks of their main chains. These lead to selective cleavage of the ordered and non-ordered regions of cellulose and chitin and result in efficient production of CNCs and ChNCs.

A4 Paper Chemistry: Synthesis of a Versatile and Chemically Modifiable Cellulose Membrane

Multifunctional cellulose membranes were developed from A4-sized printing paper via chemical modification. A4 paper is a widely used and easily accessible product with high cellulose content. Inspired by cellulose chemistry, we report a simple modification of the A4 paper, converting it from a common office supply to a user-modifiable functionalized cellulose membrane for practical applications. The hydroxyl groups of cellulose enable a facile tuning of its internal structure and polarity via chemical modification. In addition, the functionalized cellulose membrane has more stable mechanical strength compared to commercial cellulose-based filtration membranes. As a proof-of-concept, we demonstrate the separation of a water/oil mixture using the functionalized A4 membrane; we have extended this idea to origami-assisted membrane applications. Finally, this versatile A4 paper chemistry may offer a promising strategy for the development of functional membranes.

Cellulose for the effective decontamination of water pollution

The widespread industrialization, urbanization, and technological development have triggered the daily release of considerable amounts of pollutants, specifically in aquatic environments. Previous research and work-studies indicate the existence of defined properties, such as low cost, non-toxicity, biodegradability, reusability, and easy synthesis, preparation or extraction, which make a material an ideal agent for the remediation of water or the environment. Therefore, the scientific community has focused on the development and study of several novels, environmentally friendly, and cost-effective materials. Cellulose is the most abundant natural polymer encountered worldwide. Thereby, due to the unique biological properties that this biopolymer possesses, it has emerged as a potential candidate to replace synthetic materials for practical bioremediation of contaminated water. Furthermore, the presence of hydroxyl groups on its surface makes this biopolymer highly malleable, thus significantly enhancing its physicochemical properties by using a wide variety of functional groups and modification methods. The present review describes the different biopolymers useful for remediation of environmental pollution, explores in more detail the characteristics of cellulose and its promising applications in the decontamination of water pollution, and pays special attention to the removal of heavy metal ions, dyes, and hydrophobic organic compounds.

X-ray-Based Spectroscopic Techniques for Characterization of Polymer Nanocomposite Materials at a Molecular Level

This review provides detailed fundamental principles of X-ray-based characterization methods, i.e., X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, and near-edge X-ray absorption fine structure, and the development of different techniques based on the principles to gain deeper understandings of chemical structures in polymeric materials. Qualitative and quantitative analyses enable obtaining chemical compositions including the relative and absolute concentrations of specific elements and chemical bonds near the surface of or deep inside the material of interest. More importantly, these techniques help us to access the interface of a polymer and a solid material at a molecular level in a polymer nanocomposite. The collective interpretation of all this information leads us to a better understanding of why specific material properties can be modulated in composite geometry. Finally, we will highlight the impacts of the use of these spectroscopic methods in recent advances in polymer nanocomposite materials for various nano- and bio-applications.

Self-propelled cellulose nanocrystal based catalytic nanomotors for targeted hyperthermia and pollutant remediation applications

Inspired from biological motors, cellulose nanocrystals (CNCs) are strategically modified to induce self-propulsion behavior with the capabilities to catalytically degrade pollutants along with magnetic hyperthermia to clean arterial plaques during its course of propulsion. CNCs derived from renewable biomass, are decorated with catalytically active, magneto-responsive nanomaterials (Fe2O3/Pd nanoparticles) through sustainable routes. CNC nanomotors show improved propulsion at lowered peroxide concentrations with remotely controlled trajectory through chemo-magnetic field gradients and ideal surface-wettability characteristics, overcoming the requirement of surfactants, as with traditional nanomotors. We observed that nanomotors undergo motion through heterogeneous bubble propulsion mechanism, with capability to in situ degrade pollutants and generate local heat through hyperthermia, enhancing the rate of degradation process in real time. As proof of concept, we demonstrate that the dynamics of nanomotors can be controlled in a microfluidic channel through site-directed magnetic field and induction of pH gradient, mimicking the chemotaxis in cell-like environment and as swarm of nano-surgeons removes plaques from clogged arteries. Our study shows that strategic modification of CNCs results in fabrication of nanomotors with efficient propulsion system infused with multi-functional characteristics of high catalytic activity and magnetic hyperthermia which opens up new avenues for utilization of bio-based nanomotors derived from lignocellulose for myriad applications.

Dual nanofibrillar-based bio-sorbent films composed of nanocellulose and lysozyme nanofibrils for mercury removal from spring waters

The present study explores the preparation of dual nanofibrillar-based bio-sorbent films composed of cellulose nanofibrils (CNFs) and lysozyme nanofibrils (LNFs) for application in the removal of Hg(II) from aqueous solutions. The free-standing films were fabricated via simple vacuum filtration of water suspensions of CNFs and LNFs and disclose good mechanical and thermal properties. The Hg(II) removal efficiency was evaluated by atomic fluorescence spectroscopy in ultra-pure and natural spring waters contaminated with environmental realistic levels of mercury (50 μg L^-1). The removal efficiency is pH-dependent reaching a maximum of 99 % after 24 h at a pH value close to the isoelectric point of the protein. Under the experimental conditions, the sorption kinetics are well described by the pseudo-second-order and Elovich models, suggesting a chemisorption mechanism. These results demonstrate the ability of the dual nanofibrillar-based films to remove Hg(II) from water samples reaching a residual concentration lower than the guideline value for water intended for human consumption (1 μg L^-1). Therefore, the CNFs/LNFs bio-sorbents might be a solution to treat low-concentrated mercury-contaminated waters.

Macroscopic Poly Schiff Base-Coated Bacteria Cellulose with High Adsorption Performance

Here, a nanofiber-exfoliated bacteria cellulose aerogel with improved water affinity and high mass transfer was synthesized. Consequently, poly Schiff base can be uniformly coated within the body of bacteria cellulose aerogel without the traditional dispersion treatment. The composite aerogel has adequate mechanical and thermal stability and high mass transfer efficiency. Such an aerogel can serve as a superior adsorbent for flow through adsorption of pollution. Typically, the adsorption capacity towards Cr(VI), Cu(II), Re(VII), Conga red, and Orange G reaches as high as 321.5, 256.4, 153.8, 333.3, and 370.3 mg g-1, respectively. Moreover, the adsorption by this composite aerogel is very fast, such that, for example, at just 2 s, the adsorption is almost finished with Cr(VI) adsorption. Moreover, the composite aerogel exhibits a good adsorption-desorption capability. This research will hopefully shed light on the preparation of bacteria cellulose-derived macroscopic materials powerful in not only environmental areas, but also other related applications.

A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials

As the most abundant biopolymer on the earth, cellulose has recently gained significant attention in the development of antibacterial biomaterials. Biodegradability, renewability, strong mechanical properties, tunable aspect ratio, and low density offer tremendous possibilities for the use of cellulose in various fields. Owing to the high number of reactive groups (i.e., hydroxyl groups) on the cellulose surface, it can be readily functionalized with various functional groups, such as aldehydes, carboxylic acids, and amines, leading to diverse properties. In addition, the ease of surface modification of cellulose expands the range of compounds which can be grafted onto its structure, such as proteins, polymers, metal nanoparticles, and antibiotics. There are many studies in which cellulose nano-/microfibrils and nanocrystals are used as a support for antibacterial agents. However, little is known about the relationship between cellulose chemical surface modification and its antibacterial activity or biocompatibility. In this study, we have summarized various techniques for surface modifications of cellulose nanostructures and its derivatives along with their antibacterial and biocompatibility behavior to develop non-leaching and durable antibacterial materials. Despite the high effectiveness of surface-modified cellulosic antibacterial materials, more studies on their mechanism of action, the relationship between their properties and their effectivity, and more in vivo studies are required.