Rapid aggregation of gold nanoparticles induced by non-cross-linking DNA hybridization

Polymer@gold Nanoparticles Prepared via RAFT Polymerization for Opto-Biodetection

Colloidal gold nanoparticles (Au NPs) have been used in several biological applications, which include the exploitation of size- and shape-dependent Localized Surface Plasmon Resonance (LSPR) in biosensing devices. In order to obtain functional and stable Au NPs in a physiological medium, surface modification and functionalization are crucial steps in these endeavors. Reversible addition-fragmentation chain transfer (RAFT) polymerization meets this need offering the possibility of control over the composition and architecture of polymeric shells coating Au NPs. Furthermore, playing with a careful choice of monomers, RAFT polymerization allows the possibility to design a polymer shell with the desired functional groups aiming at Au based nanocomposites suitable for biorecognition and biotargeting. This review provides important aspects concerning the synthesis and optical properties of Au NPs as well as concepts of RAFT polymerization. Understanding these concepts is crucial to appreciate the chemical strategies available towards RAFT-polymer coated Au core-shell nanostructures, which are here reviewed. Finally, examples of applications in opto-biodetection devices are provided and the potential of responsive "smart" nanomaterials based on such structures can be applied to other biological applications.

Ultrasensitive optical biosensor for detection of miRNA-155 using positively charged Au nanoparticles

An ultrasensitive optical biosensor for microRNA-155 (miR-155) was developed to diagnose breast cancer at early stages. At first, the probe DNA covalently bind to the negatively charged gold nanoparticles (citrate-capped AuNPs). Then, the target miR-155 electrostatically adsorb onto the positively charged gold nanoparticles (polyethylenimine-capped AuNP) surface. Finally, by mixing citrate-capped AuNP/probe and polyethylenimine-capped AuNP/miR-155, hybridization occurs and the optical signal of the mixture give a measure to quantify the miR-155 content. The proposed biosensor is able to specify 3-base-pair mismatches and genomic DNA from target miR-155. The novelty of this biosensor is in its ability to trap the label-free target by its branched positively charged polyethylenimine. This method increases loading the target on the polyethylenimine-capped AuNPs' surface. So, proposed sensor enables miR-155 detection at very low concentrations with the detection limit of 100 aM and a wide linear range from 100 aM to 100 fM.

Tandem blocking of PCR extension to form a single-stranded overhang for facile, visual, and ultrasensitive gene detection

In order to detect a predetermined gene in a field test, a facile, visual, and ultrasensitive approach without the need of special and expensive machines is required. In this study, a gene in the Ebola virus was targeted as an example for diagnosis. The key strategy is to incorporate molecular blockers (azobenzene-bearing moieties or thymine dimers) in tandem in one of the PCR primers and stop the polymerase extension there to form a single-stranded overhang. The PCR product was added to the dispersion of gold nanoparticles which were labelled with a probe oligonucleotide. When the Ebola virus-specific gene existed in the specimen, the oligonucleotide on the gold particles formed a double-helix with the single-stranded overhang, and thus the dispersion remained red in color. In the absence of the gene, however, the dispersion rapidly turned to blue because of nanoparticle aggregation. The difference was explicit even when the initial specimen involved only 1 copy of the gene. Accordingly, “whether the patient is infected by the virus or not” can be easily and visually judged by the naked eye.

Here we present a simple but practically useful assay for gene detection. This strategy employs the advantages of both PCR and Au colloidal science, and thus satisfactorily fulfills the factors required for Point-of-Care detection.

Hydrophobic and Hydrophilic Au and Ag Nanoparticles. Breakthroughs and Perspectives

This review provides a broad look on the recent investigations on the synthesis, characterization and physico-chemical properties of noble metal nanoparticles, mainly gold and silver nanoparticles, stabilized with ligands of different chemical nature. A comprehensive review of the available literature in this field may be far too large and only some selected representative examples will be reported here, together with some recent achievements from our group, that will be discussed in more detail. Many efforts in finding synthetic routes have been performed so far to achieve metal nanoparticles with well-defined size, morphology and stability in different environments, to match the large variety of applications that can be foreseen for these materials. In particular, the synthesis and stabilization of gold and silver nanoparticles together with their properties in different emerging fields of nanomedicine, optics and sensors are reviewed and briefly commented.

Gold nanoparticle-based colorimetric biosensors

Gold nanoparticles (AuNPs) provide excellent platforms for the development of colorimetric biosensors as they can be easily functionalised, displaying different colours depending on their size, shape and state of aggregation. In the last decade, a variety of biosensors have been developed to exploit the extent of colour changes as nano-particles (NPs) either aggregate or disperse, in the presence of analytes. Of critical importance to the design of these methods is that the behaviour of the systems has to be reproducible and predictable. Much has been accomplished in understanding the interactions between a variety of substrates and AuNPs, and how these interactions can be harnessed as colorimetric reporters in biosensors. However, despite these developments, only a few biosensors have been used in practice for the detection of analytes in biological samples. The transition from proof of concept to market biosensors requires extensive long-term reliability and shelf life testing, and modification of protocols and design features to make them safe and easy to use by the population at large. Developments in the next decade will see the adoption of user friendly biosensors for point-of-care and medical diagnosis as innovations are brought to improve the analytical performances and usability of the current designs. This review discusses the mechanisms, strategies, recent advances and perspectives for the use of AuNPs as colorimetric biosensors.

One-step fabrication of LSPR-tuneable reconfigurable assemblies of gold nanoparticles decorated with biotin-binding proteins

Assemblies of gold nanoparticles with chain-like morphologies and new near-infrared (NIR) localized surface plasmon resonance (LSPR) are obtained by adding the biotin-binding proteins avidin, neutravidin or streptavidin to citrate-capped nanoparticles. The key idea behind this one-step fabrication method is to destabilize the colloids by adding positively charged proteins and/or by making their zeta potential less negative. The extent of assembly, and therefore the NIR LSPR, can be fine-tuned by varying the concentration of proteins as well as by changing the pH of the solution. The resulting nanoparticle clusters can also reconfigure into smaller assemblies that absorb less NIR light by adding thiolated molecules or by increasing the pH of the solution. This, along with the observation that the proteins retain their biotin-binding properties in the assemblies, makes the proposed method promising for the development of new biosensors and drug delivery platforms capable of self-regulating their optical properties as a function of chemical signals in their environment.

Development of a new method based on unmodified gold nanoparticles and peptide nucleic acids for detecting bovine viral diarrhea virus-RNA

A simple colorimetric assay is presented for detecting bovine viral diarrhea virus (BVDV)-RNA based on aggregation of gold nanoparticles (AuNPs) in the presence of charge-neutral peptide nucleic acids (PNA). Free charge-neutral PNA oligomers tended to be adsorbed onto AuNPs and act as a coagulant, whereas hybridizing complementary RNA with PNA disrupted PNA-induced AuNP aggregation, and the NPs remained stable. However, non-complementary RNA did not have this effect, and PNA induced aggregation of the AuNPs that resulted in a color change of the reaction from red to blue. The label-free colorimetric assay developed was estimated to have a 10.48 ng/reaction BVDV-RNA detection limit for the visual assay and 1.05 ng/reaction BVDV-RNA using a spectrophotometer. Diagnostic sensitivity and specificity for the assay was in accordance with real-time reverse transcriptase–polymerase chain reaction (RT-PCR) and nested RT-PCR results were 98 and 100%, respectively. Absorption of the 520/620 nm ratio was linear, along with an increase in the target RNA concentration of 1.64–52.4 ng/reaction (R² = 0.992), which showed a linear correlation for the quantitative assay. This study established a rapid visual label and enzyme-free diagnostic assay for detecting BVDV that is applicable in any clinical laboratory.

Designing Ecofriendly Bionanocomposite Assembly with Improved Antimicrobial and Potent on-site Zika Virus Vector Larvicidal Activities with its Mode of Action

Dialyzed natural polymer, fibroin, from Bombyx mori was used to synthesize biocompatible silver and gold nanoparticles in-situ in dispersion form. The films of pure fibroin (PF), fibroin-silver nanocomposite (FSNC) and fibroin-gold nanocomposite (FGNC) were fabricated by drop casting method. The characterization of the resultant dispersion and films was performed by visual color change, UV-Vis spectroscopy and atomic force microscopy. The dispersions of PF, FSNC and FGNC were tested for antibacterial activity against E. coli NCIM 2065, S. aureus NCIM 5021, K. pneumoniae NCIM 2957, P. aeruginosa ATCC 9027 and antifungal activity against A. fumigatus NCIM 902. FSNC dispersion exhibited an effective antimicrobial action against all the tested microbes as compared to FGNC dispersion. The mechanism of action for FSNC and FGNC against these microorganisms is proposed. Additionally, the larvicidal activity of the films was investigated against the larvae of Aedes aegypti. The films of FSNC exhibited 100% mortality while the films of FGNC revealed 86-98% mortality against all the larval instars and pupae of A. aegypti. The phytotoxicity study of the nanocomposite films was also carried out to confirm the reusability of water. This is first noble metal nanocomposite based report on larvicidal activity of zika virus vector.

Directed Assembly of Gold Nanorods by Terminal-Base Pairing of Surface-Grafted DNA

Directed assemblies of anisotropic metal nanoparticles exhibit attractive physical and chemical properties. However, an effective methodology to prepare differently directed assemblies from the same anisotropic nanoparticles is not yet available. Gold nanorods (AuNRs) region-selectively modified with different DNA strands can form side-by-side (SBS) and end-to-end (ETE) assemblies in a non-crosslinking manner. When the complementary DNA is hybridized to the surface-bound DNA, stacking interaction between the blunt ends takes place in the designated regions. Such AuNRs assemble into highly ordered structures, assisted by capillary forces emerging on the substrate surface. Moreover, insertion of a mercury(II)-mediated thymine-thymine base pair into the periphery of the DNA layer allows selective formation of the SBS or ETE assemblies from the strictly identical AuNRs with or without mercury(II).

Selective Colorimetric Detection of Nitrite in Water using Chitosan Stabilized Gold Nanoparticles Decorated Reduced Graphene oxide

Excess nitrite (NO2-) concentrations in water supplies is considered detrimental to the environment and human health, and is associated with incidence of stomach cancer. In this work, the authors describe a nitrite detection system based on the synthesis of gold nanoparticles (AuNPs) on reduced graphene oxide (rGO) using an aqueous solution of chitosan and succinic acid. The AuNPs-rGO nanocomposite was confirmed by different physicochemical characterization methods including transmission electron microscopy, elemental analysis, X-ray diffraction, UV-visible (UV-vis) and Fourier transform infrared spectroscopy. The AuNPs-rGO nanocomposite was applicable to the sensitive and selective detection of NO2- with increasing concentrations quantifiable by UV-vis spectroscopy and obvious to the naked eye. The color of the AuNPs-rGO nanocomposite changes from wine red to purple with the addition of different concertation of NO2-. Therefore, nitrite ion concentrations can be quantitatively detected using AuNPs-rGO sensor with UV-vis spectroscopy and estimated with the naked eye. The sensor is able to detect NO2- in a linear response ranging from 1 to 20 μM with a detection limit of 0.1 μM by spectrophotometric method. The as-prepared AuNPs-rGO nanocomposite shows appropriate selectivity towards NO2- in the presence of potentially interfering metal anions.

An aptamer-based paper microfluidic device for the colorimetric determination of cocaine

A method utilizing paper microfluidics coupled with gold nanoparticles and two anticocaine aptamers has been developed to detect seized cocaine samples. The ready-to-use format involves the use of a paper strip that produces a color change resulting from the salt-induced aggregation of gold nanoparticles producing a visible color change indicating the presence of the drug. This format is specific for the detection of cocaine. The visual LOD for the method was 2.5 μg and the camera based LOD was 2.36 μg. The operation of the device is easy and rapid, and does not require extensive training or instrumentation. All of the materials utilized in the device are safe and environmental friendly. This device should prove a useful tool for the screening of forensic samples.

Nanotechnology-Enhanced No-Wash Biosensors for in Vitro Diagnostics of Cancer

In vitro biosensors have been an integral component for early diagnosis of cancer in the clinic. Among them, no-wash biosensors, which only depend on the simple mixing of the signal generating probes and the sample solution without additional washing and separation steps, have been found to be particularly attractive. The outstanding advantages of facile, convenient, and rapid response of no-wash biosensors are especially suitable for point-of-care testing (POCT). One fast-growing field of no-wash biosensor design involves the usage of nanomaterials as signal amplification carriers or direct signal generating elements. The analytical capacity of no-wash biosensors with respect to sensitivity or limit of detection, specificity, stability, and multiplexing detection capacity is largely improved because of their large surface area, excellent optical, electrical, catalytic, and magnetic properties. This review provides a comprehensive overview of various nanomaterial-enhanced no-wash biosensing technologies and focuses on the analysis of the underlying mechanism of these technologies applied for the early detection of cancer biomarkers ranging from small molecules to proteins, and even whole cancerous cells. Representative examples are selected to demonstrate the proof-of-concept with promising applications for in vitro diagnostics of cancer. Finally, a brief discussion of common unresolved issues and a perspective outlook on the field are provided.

Gold aggregating gold: A novel nanoparticle biosensor approach for the direct quantification of hepatitis C virus RNA in clinical samples

The affordable and reliable detection of Hepatitis C Virus (HCV) RNA is a cornerstone in the management and control of infection, affecting approximately 3% of the global population. However, the existing technologies are expensive, labor intensive and time consuming, posing significant limitations to their wide-scale exploitation, particularly in economically deprived populations. Here, we utilized the unique optical and physicochemical properties of gold nanoparticles (AuNPs) to develop a novel assay platform shown to be rapid and robust in sensing and quantifying unamplified HCV RNA in clinical samples. The assay is based on inducing aggregation of citrate AuNPs decorated with a specific nucleic acid probe. Two types of cationic AuNPs, cysteamine and CTAB capped, were compared to achieve maximum assay performance. The technology is simple, rapid, cost effective and quantitative with 93.3% sensitivity, high specificity and detection limit of 4.57IU/µl. Finally, our data suggest that RNA folding impact the aggregation behavior of the functionalized AuNPs, with broader applications in other nucleic acid detection technologies.

Precipitation of PEG/Carboxyl-Modified Gold Nanoparticles with Magnesium Pyrophosphate: A New Platform for Real-Time Monitoring of Loop-Mediated Isothermal Amplification

Gold nanoparticles have proven to be promising for decentralized nucleic acid testing by virtue of their simple visual readout and absorbance-based quantification. A major challenge toward their practical application is to achieve ultrasensitive detection without compromising simplicity. The conventional strategy of thermocycling amplification is unfavorable (because of both instrumentation and preparation of thermostable oligonucleotide-modified gold nanoparticle probes). Herein, on the basis of a previously unreported co-precipitation phenomenon between thiolated poly(ethylene glycol)/11-mercaptoundecanoic acid co-modified gold nanoparticles and magnesium pyrophosphate crystals (an isothermal DNA amplification reaction byproduct), a new ultrasensitive and simple DNA assay platform is developed. The binding mechanism underlying the co-precipitation phenomenon is found to be caused by the complexation of carboxyl and pyrophosphate with free magnesium ions. Remarkably, poly(ethylene glycol) does not hinder the binding and effectively stabilizes gold nanoparticles against magnesium ion-induced aggregation (without pyrophosphate). In fact, a similar phenomenon is observed in other poly(ethylene glycol)- and carboxyl-containing nanomaterials. When the gold nanoparticle probe is incorporated into a loop-mediated isothermal amplification reaction, it remains as a red dispersion for a negative sample (in the absence of a target DNA sequence) but appears as a red precipitate for a positive sample (in the presence of a target). This results in a first-of-its-kind gold nanoparticle-based DNA assay platform with isothermal amplification and real-time monitoring capabilities.

Light-Triggered Assembly of Gold Nanoparticles for Photothermal Therapy and Photoacoustic Imaging of Tumors In Vivo

Photocross-linkable Au nanoparticles are prepared through surface decoration of photolabile diazirine moieties. Both in vitro and in vivo studies indicate that the light-triggered cross-linking can dramatically shift the surface plasmon resonance of Au nanoparticles to near-infrared regions, which in consequence remarkably enhances their efficacy for photothermal therapy and photoacoustic imaging of tumors in vivo.

Fluorescent aptasensor for 17β-estradiol determination based on gold nanoparticles quenching the fluorescence of Rhodamine B

In this paper, we developed a fluorescent aptasensor for 17β-estradiol (E2) determination in aqueous solution using label-free E2-specific aptamer, gold nanoparticles (AuNPs) and Rhodamine B (RhoB) as sensing probe, fluorescent quencher and fluorescent indicator respectively. In the absence of E2, AuNPs were wrapped by E2 aptamer and maintained dispersed in NaCl solution basically. These dispersed AuNPs could effectively impair the originally high fluorescence of RhoB. Contrarily, in the presence of E2, E2 aptamer could specifically combine with E2 to form E2-aptamer complex, so the AuNPs were released by E2 aptamer and aggregated under the influence of NaCl. The aggregated AuNPs have a weak influence on RhoB fluorescence. Therefore, the E2 concentration can be determined by the change of fluorescence intensity of RhoB. This fluorescent assay has a detection limit as low as 0.48 nM, a linear range from 0.48 to 200 nM, and high selectivity over other disrupting chemicals. It was applied to determine E2 in water samples with recoveries in the range of 94.3-111.7%. The fluorescent aptasensor holds great potential for E2 detection in environmental water samples.

Tumor Microenvironment Modulation via Gold Nanoparticles Targeting Malicious Exosomes: Implications for Cancer Diagnostics and Therapy

Exosomes are nanovesicles formed in the endosomal pathway with an important role in paracrine and autocrine cell communication. Exosomes secreted by cancer cells, malicious exosomes, have important roles in tumor microenvironment maturation and cancer progression. The knowledge of the role of exosomes in tumorigenesis prompted a new era in cancer diagnostics and therapy, taking advantage of the use of circulating exosomes as tumor biomarkers due to their stability in body fluids and targeting malignant exosomes’ release and/or uptake to inhibit or delay tumor development. In recent years, nanotechnology has paved the way for the development of a plethora of new diagnostic and therapeutic platforms, fostering theranostics. The unique physical and chemical properties of gold nanoparticles (AuNPs) make them suitable vehicles to pursuit this goal. AuNPs’ properties such as ease of synthesis with the desired shape and size, high surface:volume ratio, and the possibility of engineering their surface as desired, potentiate AuNPs’ role in nanotheranostics, allowing the use of the same formulation for exosome detection and restraining the effect of malicious exosomes in cancer progression.

Fluorescent detection of point mutation via ligase reaction assisted by quantum dots and magnetic nanoparticle-based probes

A nanodiagnostic genotyping method was presented for point mutation detection directly in human genomic DNA based on ligase reaction coupled with quantum dots and magnetic nanoparticle-based probes.

Colorimetric detection of epinephrine using an optimized paper-based aptasensor

Morphological modification of gold nanoparticles to obtain a highly efficient paper based sensor for colorimetric detection of epinephrine (LOD – Limit of Detection).

A luminescent and colorimetric probe based on the functionalization of gold nanoparticles by ruthenium(ii) complexes for heparin detection

A colorimetric and luminescent bifunctional Ru(ii) complex-modified gold nanoprobe for the sensing of heparin in Tris-HCl buffer (pH 7.4) and 1% fetal bovine serum (FBS) was developed.

Biocatalytic Formation of Gold Nanoparticles Decorated with Functional Proteins inside Recombinant Escherichia coli Cells

A novel strategy for the preparation of protein-decorated gold nanoparticles (Au NPs) was developed inside Escherichia coli cells, where an artificial oxidoreductase, composed of antibody-binding protein (pG), Bacillus stearothermophilus glycerol dehydrogenase (BsGLD) and a peptide tag with gold-binding affinity (H6C), was overexpressed in the cytoplasm. In situ formation of Au NPs was promoted by a natural electron-donating cofactor, nicotinamide adenine dinucleotide (NAD), which was regenerated to the reduced form of NADH by the catalytic activity of the fusion protein (pG-BsGLD-H6C) overexpressed in the cytoplasm of E. coli, with the concomitant addition of exogenous glycerol to the reaction system. The fusion protein was self-immobilized on Au NPs inside the E. coli cells, which was confirmed by SDS-PAGE and western blotting analyses of the resultant Au NPs. Finally, the IgG binding ability of the pG moiety displayed on Au NPs was evaluated by an enzyme-linked immunosorbent assay.

Terminal-Specific Interaction between Double-Stranded DNA Layers: Colloidal Dispersion Behavior and Surface Force

Double-stranded DNA-grafted nanoparticles (dsDNA-NPs) exhibit a unique dispersion behavior under high-salt conditions depending on the pairing status of their outermost base pairs (pairing or unpairing). The dsDNA-NPs having complementary (i.e., pairing) outermost base pairs spontaneously aggregate under high-salt conditions, but not when their outermost base pairs are mismatched (unpairing). In this study, we used colloidal probe atomic force microscopy to examine how the outermost base pairs affect the interaction between the dsDNA-grafted layers (dsDNA layers). To precisely assess the subtle structural differences in the dsDNA layers, we developed a method for the formation of a homogenous dsDNA layer on gold surfaces using hairpin-shaped DNAs. Homogenous dsDNA layers having complementary (G-C) or mismatched (C-C) outermost base pairs were grafted onto the surfaces of colloidal probes and gold substrates. Force-distance curves measured in an aqueous medium under high-salt conditions revealed that the surface forces between the dsDNA layers were bilateral in nature and were governed by the outermost base pairs. Between complementary outermost dsDNA layers, the surface force changed from repulsive to attractive with an increase in the NaCl concentration (10-1000 mM). The attraction observed under high-salt conditions was attributed to the site-specific interaction proceeded only between complementary dsDNA terminals, the so-called blunt-end stacking. In fact, between mismatched outermost dsDNA layers, the repulsive force was mostly dominant within the same NaCl concentration range. Our results clearly revealed that the pairing status of the outermost base pairs has significant implications for the surface forces between dsDNA layers, leading to the unique dispersion behavior of dsDNA-NPs.

Utilizing Gold Nanoparticle Probes to Visually Detect DNA Methylation

The surface plasmon resonance (SPR) effect endows gold nanoparticles (GNPs) with the ability to visualize biomolecules. In the present study, we designed and constructed a GNP probe to allow the semi-quantitative analysis of methylated tumor suppressor genes in cultured cells. To construct the probe, the GNP surfaces were coated with single-stranded DNA (ssDNA) by forming Au-S bonds. The ssDNA contains a thiolated 5'-end, a regulatory domain of 12 adenine nucleotides, and a functional domain with absolute pairing with methylated p16 sequence (Met-p16). The probe, paired with Met-p16, clearly changed the color of aggregating GNPs probe in 5 mol/L NaCl solution. Utilizing the probe, p16 gene methylation in HCT116 cells was semi-quantified. Further, the methylation of E-cadherin, p15, and p16 gene in Caco2, HepG2, and HCT116 cell lines were detected by the corresponding probes, constructed with three domains. This simple and cost-effective method was useful for the diagnosis of DNA methylation-related diseases.

Rapid Naked-Eye Discrimination of Cytochrome P450 Genetic Polymorphism through Non-Crosslinking Aggregation of DNA-Functionalized Gold Nanoparticles

Involvement of single-nucleotide polymorphism (SNP) genotyping in healthcare should allow for more effective use of pharmacogenomics. However, user-friendly assays without the requirement of a special instrument still remain unavailable. This study describes naked-eye SNP discrimination in exon 5 of the human cytochrome P450 2C19 monooxygenase gene, CYP2C19*1 (the wild-type allele) and CYP2C19*2 (the variant allele with G681A point mutation). The present assay is composed of allele-specific single-base primer extension and salt-induced aggregation of DNA-modified gold nanoparticles (DNA-AuNPs). Genetic samples extracted from human hair roots are subjected to this assay. The results are verified by direct sequencing. This study should promise the prospective use of DNA-AuNPs in gene diagnosis.

Preparation of Cement Composites with Ordered Microstructures via Doping with Graphene Oxide Nanosheets and an Investigation of Their Strength and Durability

The main problem with cement composites is that they have structural defects, including cracks, holes, and a disordered morphology, which significantly affects their strength and durability. Therefore, the construction of cement composites with defect-free structures and high strength and long durability is an important research topic. Here, by controlling the size and chemical groups of graphene oxide nanosheets (GONs) used for doping, we were able to control the entire cement matrix to form an ordered microstructure consisting of polyhedron-like crystals and exhibit flower-like patterns. The cracks and holes in the cement matrix just about vanished. The compressive and flexural strengths as well as the parameters for the durability assessment of the corresponding cement composites obviously improved compared with the control samples. Thus, the formation mechanism of the cement matrix with the ordered microstructure is proposed, and a proper explanation is given to regulation action.

Ordering Gold Nanoparticles with DNA Origami Nanoflowers

Nanostructured materials, including plasmonic metamaterials made from gold and silver nanoparticles, provide access to new materials properties. The assembly of nanoparticles into extended arrays can be controlled through surface functionalization and the use of increasingly sophisticated linkers. We present a versatile way to control the bonding symmetry of gold nanoparticles by wrapping them in flower-shaped DNA origami structures. These "nanoflowers" assemble into two-dimensonal gold nanoparticle lattices with symmetries that can be controlled through auxiliary DNA linker strands. Nanoflower lattices are true composites: interactions between the gold nanoparticles are mediated entirely by DNA, and the DNA origami will fold into its designed form only in the presence of the gold nanoparticles.

Multifunctional polyelectrolyte microcapsules as a contrast agent for photoacoustic imaging in blood

The polyelectrolyte microcapsules that can be accurate either visualized in biological media or in tissue would enhance their further in vivo application both as a carrier of active payloads and as a specific sensor. The immobilization of active species, for instance fluorescent dyes, quantum dots, metal nanoparticles, in polymeric shell enables visualization of capsules by optical imaging techniques in aqueous solution. However, for visualization of capsules in complex media an instrument with high contrast modality requires. Herein, we show for the first time photoacoustic imaging (PAI) of multifunctional microcapsules in water and in blood. The microcapsules exhibit greater photoacoustic intensity compare to microparticles with the same composition of polymeric shell presumably their higher thermal expansion. Photoacoustic intensity form microcapsules dispersed in blood displays an enhancement (2-fold) of signal compare to blood. Photoacoustic imaging of microcapsules might contribute to non-invasive carrier visualization and further their in vivo distribution.

Dielectrophoresis of gold nanoparticles conjugated to DNA origami structures

DNA nanostructures are promising construction materials to bridge the gap between self-assembly of functional molecules and conventional top-down fabrication methods in nanotechnology. Their positioning onto specific locations of a microstructured substrate is an important task towards this aim. Here we study manipulation and positioning of pristine and of gold nanoparticle-conjugated tubular DNA origami structures using ac dielectrophoresis. The dielectrophoretic behavior was investigated employing fluorescence microscopy. For the pristine origami, a significant dielectrophoretic response was found to take place in the megahertz range, whereas, due to the higher polarizability of the metallic nanoparticles, the nanoparticle/DNA hybrid structures required a lower electrical field strength and frequency for a comparable trapping at the edges of the electrode structure. The nanoparticle conjugation additionally resulted in a remarkable alteration of the DNA structure arrangement. The growth of linear, chain-like structures in between electrodes at applied frequencies in the megahertz range was observed. The long-range chain formation is caused by a local, gold nanoparticle-induced field concentration along the DNA nanostructures, which in turn, creates dielectrophoretic forces that enable the observed self-alignment of the hybrid structures.

ssDNA-Functionalized Nanoceria: A Redox-Active Aptaswitch for Biomolecular Recognition

Quantification of biomolecular binding events is a critical step for the development of biorecognition assays for diagnostics and therapeutic applications. This paper reports the design of redox-active switches based on aptamer conjugated nanoceria for detection and quantification of biomolecular recognition. It is shown that the conformational transition state of the aptamer on nanoceria, combined with the redox properties of these particles can be used to create surface based structure switchable aptasensing platforms. Changes in the redox properties at the nanoceria surface upon binding of the ssDNA and its target analyte enables rapid and highly sensitive measurement of biomolecular interactions. This concept is demonstrated as a general applicable method to the colorimetric detection of DNA binding events. An example of a nanoceria aptaswitch for the colorimetric sensing of Ochratoxin A (OTA) and applicability to other targets is provided. The system can sensitively and selectivity detect as low as 0.15 × 10(-9) m OTA. This novel assay is simple in design and does not involve oligonucleotide labeling or elaborate nanoparticle modification steps. The proposed mechanism discovered here opens up a new way of designing optical sensing methods based on aptamer recognition. This approach can be broadly applicable to many bimolecular recognition processes and related applications.

Colorimetric detection based on localised surface plasmon resonance of gold nanoparticles: Merits, inherent shortcomings and future prospects

Localised surface plasmon resonance (LSPR) of gold nanoparticles (AuNPs) has been exploited for two decades in analytical science and has proven to be a powerful tool for the detection of various kinds of substances including small molecules, ions, macro biomolecules and microbes. Detection can be performed by visual colour change observations, photometry or resonance light scattering. A wide range of applications have been studied in the areas of environmental, pharmaceutical and biological analysis and clinical diagnosis. In this article, some fundamental aspects and important applications involving LSPR of AuNPs are reviewed. Several inherent shortcomings of these techniques and possible strategies to circumvent them are discussed.

Bottom-Up Synthesis and Sensor Applications of Biomimetic Nanostructures

The combination of nanotechnology, biology, and bioengineering greatly improved the developments of nanomaterials with unique functions and properties. Biomolecules as the nanoscale building blocks play very important roles for the final formation of functional nanostructures. Many kinds of novel nanostructures have been created by using the bioinspired self-assembly and subsequent binding with various nanoparticles. In this review, we summarized the studies on the fabrications and sensor applications of biomimetic nanostructures. The strategies for creating different bottom-up nanostructures by using biomolecules like DNA, protein, peptide, and virus, as well as microorganisms like bacteria and plant leaf are introduced. In addition, the potential applications of the synthesized biomimetic nanostructures for colorimetry, fluorescence, surface plasmon resonance, surface-enhanced Raman scattering, electrical resistance, electrochemistry, and quartz crystal microbalance sensors are presented. This review will promote the understanding of relationships between biomolecules/microorganisms and functional nanomaterials in one way, and in another way it will guide the design and synthesis of biomimetic nanomaterials with unique properties in the future.

Characterization of Paracoccidioides brasiliensis by FT-IR spectroscopy and nanotechnology

Paracoccidioides brasiliensis, the etiological agent of paracoccidioidomycosis, is a dimorphic fungus existing as mycelia in the environment (or at 25°C in vitro) and as yeast cells in the human host (or at 37°C in vitro). Because mycological examination of lesions in patients frequently is unable to show the presence of the fungus and serological tests can misdiagnose the disease with other mycosis, the development of new approach's for molecular identification of P. brasiliensis spurges is needed. This study describes the use of a gold nanoprobe of a known gene sequence of P. brasiliensis as a molecular tool to identify P. brasiliensis by regular polymerase chain reaction (PCR) associated with a colorimetric methods. This approach is suitable for testing in remote areas because it does not require any further step than gene amplification, being safer and cheaper than electrophoresis methods. The proposed test showed a color change of the PCR reaction mixture from red to blue in negative samples, whereas the solution remains red in positive samples. We also performed a Fourier Transform Infrared (FT-IR) Spectroscopy analysis to characterize and compare the chemical composition between yeast and mycelia forms, which revealed biochemical differences between these two forms. The analysis of the spectra showed that differences were distributed in chemical bonds of proteins, lipids and carbohydrates. The most prominent difference between both forms was vibration modes related to 1,3-β-glucan usually found in mycelia and 1,3-α-glucan found in yeasts and also chitin forms. In this work, we introduce FT-IR as a new method suitable to reveal overall differences that biochemically distinguish each form of P. brasiliensis that could be additionally used to discriminate biochemical differences among a single form under distinct environmental conditions.

High-yield halide-free synthesis of biocompatible Au nanoplates

We communicate an unconventional synthesis of Au nanoplates with high yield and excellent reproducibility through polyvinylpyrrolidone (PVP)-assisted H₂O₂ reduction.

Differentiation of biothiols from other sulfur-containing biomolecules using iodide-capped gold nanoparticles

We describe here a simple method based on the aggregation of iodide-capped gold nanoparticles (GNPs) to differentiate biothiols from other sulfur-containing biomolecules.

DNA templated self-assembly of gold nanoparticle clusters in the colorimetric detection of plant viral DNA using a gold nanoparticle conjugated bifunctional oligonucleotide probe

The DNA templated self-assembly of gold nanoparticles clustered in different configurations (nn = 2–∞) was investigated in the colorimetric detection of ToLCNDV DNA using a gold nanoparticle conjugated bifunctional oligonucleotide probe.

Fluorescent gold nanoclusters for in vivo target imaging of Alzheimer's disease

Fluorescent gold nanoclusters forin vivotarget imaging provides a new way for rapid and early diagnosis of Alzheimer's disease.