Direct Carbonization of Al-Based Porous Coordination Polymer for Synthesis of Nanoporous Carbon

Six Isomorphous Window-Beam MOFs: Explore the Effects of Metal Ions on MOF-Derived Carbon for Supercapacitors

Six isomorphous metal-organic frameworks (MOFs) with a 3D window-beam architecture have been synthesized from solvothermal reactions, and are named Zn, Cd, Ni, Co, Mn and Cu-MOF, respectively. The series of MOFs was utilized as precursors to synthesize MOF-derived carbon with different morphologies. Zn and Cd-MOFs lead to the derivation of porous carbons (PCs), which exhibit remarkable BET specific surface areas. For derivates of Ni, Co and Mn-MOFs, graphitized carbons (GCs) show some carbon graphitization, but their BET specific surface areas are relatively small. C-Cu has the smallest BET specific surface area, and there is no carbon graphitization. Therefore, the metal ion of the parent MOF exerts a crucial effect on the preparation of MOF-derived carbon, such as the pore-forming effect of Zn and Cd species, and catalytic graphitization of Ni, Co, and Mn species. The capacitances of MOF-derived carbon follow the sequence of PCs>GCs>C-Cu, which reveals that the specific surface area plays a dominant role in the capacitive performance of electrical double layer capacitors (EDLCs), and that the graphitization could improve the capacitance. Significantly, PC-Zn exhibits the best specific capacitance (138 F g^-1 at 0.5 Ag^-1 ), and excellent life cycle, which can be applied as an electrode material in supercapacitors.

Metal-organic framework-derived metal-free highly graphitized nitrogen-doped porous carbon with a hierarchical porous structure as an efficient and stable electrocatalyst for oxygen reduction reaction

Nitrogen-doped carbon materials are promising oxygen reduction reaction (ORR) electrocatalysts owing to high performance and stability. Herein, a three-dimensional porous bio-MOF-1, Zn₈(Ad)₄(Bpdc)₆O·2Me₂NH₂ (Ad = adeninate; Bpdc = biphenyldicarboxylate), was used as precursor to fabricate N-doped porous carbon materials (NPC-1000-ts, where 1000 stands for the carbonization temperature and t represents the carbonization time, t = 2, 3 and 4 h) by simple carbonization under Ar atmosphere. The porous carbon materials had different contents of graphitic N and graphitization degrees of carbon. The catalytic activities of NPCs as metal-free ORR electrocatalysts were studied. The obtained NPC-1000-4 (pyrolysis under 1000 °C for 4 h) displayed outstanding ORR performance, with a positive onset potential (-0.012 V), a higher half-wave potential (E_1/2) (-0.13 V) and a larger limiting current density (-5.76 mA/cm²) at -0.8 V (vs. Ag/AgCl) in KOH solution (0.1 M) than those of commercial Pt/C (20 wt%) catalyst (E_onset = -0.014 V, E_1/2 = -0.14 V and -5.08 mA/cm² at -0.8 V vs. Ag/AgCl). Obviously, the onset potential of NPC-1000-4 surpassed that of Pt/C, which was rare among currently available studies on metal-free nitrogen-doped porous carbon materials. Graphitic N significantly affected ORR catalytic performance besides graphitization degree of carbon. Meanwhile, NPC-1000-4 allowed an effective 4e^--dominant ORR process, and most importantly, coupled with much higher long-term stability (89.5%) than that of commercial Pt/C (20 wt%, 65.8%) catalyst and higher resistance to methanol poisoning. The remarkable ORR activity of NPC-1000-4 can be ascribed to large surface area, considerable hierarchical porosity, high graphitization degree and synergism between enriched active sites and high portion of graphitic N. Overall, the findings guide the development of MOF-derived metal-free N-doped carbon materials as high-activity non-precious electrocatalysts for ORR.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Nanoscale Homogeneous Energetic Copper Azides@Porous Carbon Hybrid with Reduced Sensitivity and High Ignition Ability

Research on green primary explosives with lead-free and excellent ignition performance is of significance for practical applications. In this work, we have developed a novel, green, and facile strategy for synthesizing copper azide@porous carbon hybrids (CA@PC) based on ionic cross-linked hydrogel with low-cost cellulose derivatives as the starting material, in which the CA nanoparticles are uniformly distributed in the porous carbon skeletons. The detailed characterizations and control experiments demonstrated that such an outstanding performance originates from the excellent electric conductivity of nanoscale carbon cages. With the favorable unique structures, the as-prepared hybrids can greatly benefit a new type of energetic materials, which exhibit a very low electrostatic sensitivity of 1.06 mJ. Interestingly, the hybrids possess a high ignition ability, and the flame sensitivity can even achieve 47 cm, superior to those well-developed CA-based materials reported previously. This work paves the way toward the design and development of next-generation highly efficient energetic materials.

Zeolite-templated carbons - three-dimensional microporous graphene frameworks

Zeolite-templated carbons (ZTCs) are ordered microporous carbons synthesized by using zeolite as a sacrificial template. Unlike well-known ordered mesoporous carbons obtained by using mesoporous silica templates, ZTCs consist of curved and single-layer graphene frameworks, thereby affording uniform micropore size (ca. 1.2 nm), developed microporosity (∼1.7 cm3 g-1), very high surface area (∼4000 m2 g-1), good compatibility with chemical modification, and remarkable softness/elasticity. Thus, ZTCs have been used in many applications such as hydrogen storage, methane storage, CO2 capture, liquid-phase adsorption, catalysts, electrochemical capacitors, batteries, and fuel cells. Herein, the relevant research studies are summarized, and the properties as well as the performances of ZTCs are compared with those of other materials including metal-organic frameworks, to elucidate the intrinsic advantages of ZTCs and their future development.

Bottom-up Formation of Carbon-Based Structures with Multilevel Hierarchy from MOF-Guest Polyhedra

Three-dimensional carbon-based structures have proven useful for tailoring material properties in structural mechanical and energy storage applications. One approach to obtain them has been by carbonization of selected metal-organic frameworks (MOFs) with catalytic metals, but this is not applicable to most common MOF structures. Here, we present a strategy to transform common MOFs, by guest inclusions and high-temperature MOF-guest interactions, into complex carbon-based, diatom-like, hierarchical structures (named for the morphological similarities with the naturally existing diatomaceous species). As an example, we introduce metal salt guests into HKUST-1-type MOFs to generate a family of carbon-based nano-diatoms with two to four levels of structural hierarchy. We report control of the morphology by simple changes in the chemistry of the MOF and guest, with implications for the formation mechanisms. We demonstrate that one of these structures has unique advantages as a fast-charging lithium-ion battery anode. The tunability of composition should enable further studies of reaction mechanisms and result in the growth of a myriad of unprecedented carbon-based structures from the enormous variety of currently available MOF-guest candidates.

Thermal Instability Induced Oriented 2D Pores for Enhanced Sodium Storage

Hierarchical porous structures are highly desired for various applications. However, it is still challenging to obtain such materials with tunable architectures. Here, this paper reports hierarchical nanomaterials with oriented 2D pores by taking advantages of thermally instable bonds in vanadium-based metal-organic frameworks (MOFs). High-temperature calcination of these MOFs accompanied by the loss of coordinated water molecules and other components enables the formation of orderly slit-like 2D pores in vanadium oxide/porous carbon nanorods (VO_x /PCs). This unique combination leads to an increase of the reactive surface area. In addition, optimized VO_x /PCs demonstrate high-rate capability and ultralong cycling life for sodium storage. The assembled full cells also show high capacity and cycling stability. This report provides an effective strategy for producing MOFs-derived composites with hierarchical porous architectures for energy storage.

Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications

Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

A Facile Approach to Prepare Multiple Heteroatom-Doped Carbon Materials from Imine-Linked Porous Organic Polymers

In this paper, we proposed a new strategy to prepare multiple heteroatom doped (N, P-doped) porous carbon materials with high surface area of ~1,535 m² g⁻¹ simply by pyrolysis of imine-linked porous organic polymers (POPs) synthesized via Schiff base condensation. The strategy is simple without any post-processing and various heteroatoms could be involved. Scanning electron microscopy, Raman spectra, Nitrogen gas adsorption-desorption, X-ray photoelectron spectroscopy have been used to characterize the morphology, the structure and the composition of the materials. The multiple heteroatom doped porous carbon materials also display high electrocatalytic performance as exampled by the application in oxygen reduction, which showed the catalyst favors 4-electron transfer during the process, along with superior stability and higher tolerance to methanol as compared to the Pt/C. These results indicate the present method is promising for the preparation of multi-heteroatom doped carbon materials in the application of electrocatalysis.

Porous Carbon-Hosted Atomically Dispersed Iron-Nitrogen Moiety as Enhanced Electrocatalysts for Oxygen Reduction Reaction in a Wide Range of pH

As one of the alternatives to replace precious metal catalysts, transition-metal-nitrogen-carbon (M-N-C) electrocatalysts have attracted great research interest due to their low cost and good catalytic activities. Despite nanostructured M-N-C catalysts can achieve good electrochemical performances, they are vulnerable to aggregation and insufficient catalytic sites upon continuous catalytic reaction. In this work, metal-organic frameworks derived porous single-atom electrocatalysts (SAEs) were successfully prepared by simple pyrolysis procedure without any further posttreatment. Combining the X-ray absorption near-edge spectroscopy and electrochemical measurements, the SAEs have been identified with superior oxygen reduction reaction (ORR) activity and stability compared with Pt/C catalysts in alkaline condition. More impressively, the SAEs also show excellent ORR electrocatalytic performance in both acid and neutral media. This study of nonprecious catalysts provides new insights on nanoengineering catalytically active sites and porous structures for nonprecious metal ORR catalysis in a wide range of pH.

Recent Progress on MOF-Derived Heteroatom-Doped Carbon-Based Electrocatalysts for Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is the core reaction of numerous sustainable energy-conversion technologies such as fuel cells and metal-air batteries. It is crucial to develop a cost-effective, highly active, and durable electrocatalysts for ORR to overcome the sluggish kinetics of four electrons pathway. In recent years, the carbon-based electrocatalysts derived from metal-organic frameworks (MOFs) have attracted tremendous attention and have been shown to exhibit superior catalytic activity and excellent intrinsic properties such as large surface area, large pore volume, uniform pore distribution, and tunable chemical structure. Here in this review, the development of MOF-derived heteroatom-doped carbon-based electrocatalysts, including non-metal (such as N, S, B, and P) and metal (such as Fe and Co) doped carbon materials, is summarized. It furthermore, it is demonstrated that the enhancement of ORR performance is associated with favorably well-designed porous structure, large surface area, and high-tensity active sites. Finally, the future perspectives of carbon-based electrocatalysts for ORR are provided with an emphasis on the development of a clear mechanism of MOF-derived non-metal-doped electrocatalysts and certain metal-doped electrocatalysts.

Chemical induced fragmentation of MOFs for highly efficient Ni-based hydrogen evolution catalysts

A highly efficient catalyst for the hydrogen evolution reaction (HER) composed of Ni nanoparticles encapsulated in thin layers of N-doped carbon (Ni@NC) can be obtained by NH₃ induced fragmentation of a Ni based MOF at mild temperature (450 °C). A mechanistic study shows that the high chemical reactivity of NH₃ causes ammonolysis of the ligands and allows ligand removal well below their carbonization temperature. In conventional thermal decomposition in Ar, metal-ligand bond dissociation and ligand carbonization occurs in the same temperature region, resulting in a catalyst with high carbon content and much poorer HER performance. We further improve the HER performance by combining the NH₃ induced fragmentation and destabilization of the Ni-MOF structure by low levels of Co substitution, which results in smaller, more uniform catalyst particles. Using the noble metal free HER catalyst, an overall solar-to-hydrogen efficiency of 7.9% is achieved in an electrolyzer driven by a commercial polycrystalline solar cell with an efficiency of 12.9%.

Environmentally Sustainable Aluminum-Coordinated Poly(tetrahydroxybenzoquinone) as a Promising Cathode for Sodium Ion Batteries

Na-ion batteries are attractive as an alternative to Li-ion batteries because of their lower cost. Organic compounds have been considered as promising electrode materials due to their environmental friendliness and molecular diversity. Herein, aluminum-coordinated poly(tetrahydroxybenzoquinone) (P(THBQ-Al)), one of the coordination polymers, is introduced for the first time as a promising cathode for Na-ion batteries. P(THBQ-Al) is synthesized through a facile coordination reaction between benzoquinonedihydroxydiolate (C₆O₆H₂^2-) and Al³⁺ as ligands and complex metal ions, respectively. Tetrahydroxybenzoquinone is environmentally sustainable, because it can be obtained from natural resources such as orange peels. Benzoquinonedihydroxydiolate also contributes to delivering high reversible capacity, because each benzoquinonedihydroxydiolate unit is capable of two electron reactions through the sodiation of its conjugated carbonyl groups. Electrochemically inactive Al³⁺ improves the structural stability of P(THBQ-Al) during cycling because of a lack of a change in its oxidation state. Moreover, P(THBQ-Al) is thermally stable and insoluble in nonaqueous electrolytes. These result in excellent electrochemical performance including a high reversible capacity of 113 mA h g^-1 and stable cycle performance with negligible capacity fading over 100 cycles. Moreover, the reaction mechanism of P(THBQ-Al) is clarified through ex situ XPS and IR analyses, in which the reversible sodiation of C═O into C-O-Na is observed.

Effective adsorption of sulfamethoxazole, bisphenol A and methyl orange on nanoporous carbon derived from metal-organic frameworks

Nanoporous carbons (NPCs) derived from metal-organic frameworks (MOFs) are attracting increasing attention in many areas by virtue of their high specific surface area, large pore volume and unique porosity. The present work reports the preparation of an NPC with high surface area (1731m²/g) and pore volume (1.68cm³/g) by direct carbonization of MOF-5. We examined the adsorption of three typical contaminants from aqueous solutions, i.e., sulfamethoxazole (SMX), bisphenol A (BPA) and methyl orange (MO), by using the as-prepared NPC. The results demonstrated that NPC could adsorb the contaminants effectively, with adsorption capacity (q_m) of 625mg/g (SMX), 757mg/g (BPA) and 872mg/g (MO), respectively. These values were approximately 1.0-3.2 times higher than those obtained for single-walled carbon nanotubes (SWCNTs) and commercial powder active carbon (PAC) under the same conditions. With its high surface area and unique meso/macropore structure, the enhanced adsorption of NPC most likely originates from the cooperative interaction of a pore-filling mechanism, electrostatic interaction, and hydrogen bonding. In particular, the pH value has a crucial impact on adsorption, suggesting the significant contribution of electrostatic interaction between NPC and the contaminants. This study provides a proof-of-concept demonstration of MOF-derived nanoporous carbons as effective adsorbents of contaminants for water treatment.

Ni–Co layered double hydroxide on carbon nanorods and graphene nanoribbons derived from MOFs for supercapacitors

In this study, carbon nanorods (CNR) and graphene nanoribbons (GNR) derived from metal–organic frameworks (MOFs) were first prepared by solvothermal method.

Porous metal–organic gel assisted by l-tartaric acid ligand for efficient and controllable drug delivery

The synthetic route for drug carriers based on porous Al-MOG.

Metal-Organic Framework-Derived Materials for Sodium Energy Storage

Recently, sodium-ion batteries (SIBs) are extensively explored and are regarded as one of the most promising alternatives to lithium-ion batteries for electrochemical energy conversion and storage, owing to the abundant raw material resources, low cost, and similar electrochemical behavior of elemental sodium compared to lithium. Metal-organic frameworks (MOFs) have attracted enormous attention due to their high surface areas, tunable structures, and diverse applications in drug delivery, gas storage, and catalysis. Recently, there has been an escalating interest in exploiting MOF-derived materials as anodes for sodium energy storage due to their fast mass transport resulting from their highly porous structures and relatively simple preparation methods originating from in situ thermal treatment processes. In this Review, the recent progress of the sodium-ion storage performances of MOF-derived materials, including MOF-derived porous carbons, metal oxides, metal oxide/carbon nanocomposites, and other materials (e.g., metal phosphides, metal sulfides, and metal selenides), as SIB anodes is systematically and completely presented and discussed. Moreover, the current challenges and perspectives of MOF-derived materials in electrochemical energy storage are discussed.

Porosity- and content-controlled metal/metal oxide/metal carbide@carbon (M/MO/MC@C) composites derived from MOFs: mechanism study and application for lithium-ion batteries

Facile method for morphology-preserved transformation of MOFs to porosity and content-controlled M/MO/MC@C composites is presented.

Landscape of Research Areas for Zeolites and Metal-Organic Frameworks Using Computational Classification Based on Citation Networks

The field of porous materials is widely spreading nowadays, and researchers need to read tremendous numbers of papers to obtain a "bird's eye" view of a given research area. However, it is difficult for researchers to obtain an objective database based on statistical data without any relation to subjective knowledge related to individual research interests. Here, citation network analysis was applied for a comparative analysis of the research areas for zeolites and metal-organic frameworks as examples for porous materials. The statistical and objective data contributed to the analysis of: (1) the computational screening of research areas; (2) classification of research stages to a certain domain; (3) "well-cited" research areas; and (4) research area preferences of specific countries. Moreover, we proposed a methodology to assist researchers to gain potential research ideas by reviewing related research areas, which is based on the detection of unfocused ideas in one area but focused in the other area by a bibliometric approach.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.

Complex Nanostructures from Materials based on Metal-Organic Frameworks for Electrochemical Energy Storage and Conversion

Metal-organic frameworks (MOFs) have drawn tremendous attention because of their abundant diversity in structure and composition. Recently, there has been growing research interest in deriving advanced nanomaterials with complex architectures and tailored chemical compositions from MOF-based precursors for electrochemical energy storage and conversion. Here, a comprehensive overview of the synthesis and energy-related applications of complex nanostructures derived from MOF-based precursors is provided. After a brief summary of synthetic methods of MOF-based templates and their conversion to desirable nanostructures, delicate designs and preparation of complex architectures from MOFs or their composites are described in detail, including porous structures, single-shelled hollow structures, and multishelled hollow structures, as well as other unusual complex structures. Afterward, their applications are discussed as electrode materials or catalysts for lithium-ion batteries, hybrid supercapacitors, water-splitting devices, and fuel cells. Lastly, the research challenges and possible development directions of complex nanostructures derived from MOF-based-templates for electrochemical energy storage and conversion applications are outlined.

A Microribbon Hybrid Structure of CoOx-MoC Encapsulated in N-Doped Carbon Nanowire Derived from MOF as Efficient Oxygen Evolution Electrocatalysts

Developing highly efficient electrocatalysts for oxygen evolution is vital for renewable and sustainable energy production and storage. Herein, nitrogen-doped carbon encapsulated CoOx-MoC heterostructures are reported for the first time as high performance oxygen evolution electrocatalysts. The composition can be tuned by the addition of a Mo source to form a nanowire-assembled hierarchically porous microstructure, which can enlarge the specific surface area, thus exposing more active sites, facilitating mass transport and charge transfer. Moreover, it is demonstrated that the formation of CoOx-MoC heterostructures and the resulting synergistic effect between MoC and Co facilitate the reaction kinetics, leading to significantly improved oxygen evolution reaction (OER) activity with an onset overpotential of merely 290 mV, and a low overpotential of 330 mV to afford a current density of 10 mA cm^-2 . The well-constructed microarchitecture contributes to superior long term stability electrochemical behaviors. This work provides a facile strategy via composition tuning and structure optimization for the development of next-generation nonprecious metal-based OER electrocatalysts.

Metal-organic frameworks and their derived materials for electrochemical energy storage and conversion: Promises and challenges

In addition to their conventional uses, metal-organic frameworks (MOFs) have recently emerged as an interesting class of functional materials and precursors of inorganic materials for electrochemical energy storage and conversion technologies. This class of MOF-related materials can be broadly categorized into two groups: pristine MOF-based materials and MOF-derived functional materials. Although the diversity in composition and structure leads to diverse and tunable functionalities of MOF-based materials, it appears that much more effort in this emerging field is devoted to synthesizing MOF-derived materials for electrochemical applications. This is in view of two main drawbacks of MOF-based materials: the low conductivity nature and the stability issue. On the contrary, MOF-derived synthesis strategies have substantial advantages in controlling the composition and structure of MOF-derived materials. From this perspective, we review some emerging applications of both groups of MOF-related materials as electrode materials for rechargeable batteries and electrochemical capacitors, efficient electrocatalysts, and even electrolytes for electrochemical devices. By highlighting the advantages and challenges of each class of materials for different applications, we hope to shed some light on the future development of this highly exciting area.

Facile synthesis of CoxP decorated porous carbon microspheres for ultrasensitive detection of 4-nitrophenol

A novel cobalt phosphide (Co_xP, a mixture of CoP and Co₂P) embedded within nitrogen-doped porous carbon microspheres was facilely prepared by pyrolysis of a composite precursor. The composite precursor was achieved by in-situ growth of Co-based zeolitic imidazolate framework (ZIF-67) on the Zn(PO₄)_x microspheres. The as-prepared Co_xP decorated nitrogen-doped porous carbon microspheres (Co_xP/NC) possess uniform distribution of graphite-encapsulated Co_xP, a large surface area (826m²g^-1) and abundant mesopores. It was found the Co_xP/NC exhibited excellent electrocatalytic performances toward 4-nitrophenol (4-NP). Therefore, Co_xP/NC was developed to fabricate an ultrasensitive electrochemical sensor for 4-NP by using differential pulse voltammetry (DPV). In comparison with glassy carbon electrode (GCE) and nitrogen-doped carbon (NC) modified GCE, the Co_xP/NC modified GCE (Co_xP/NC/GCE) showed a remarkable increase in DPV current toward 4-NP. Under optimized condition, an ultrahigh sensitivity of 20.9 (μA μmol^-1 L) and a low detection limit of 2 × 10^-9molL^-1 (at a signal-to-noise ratio of 3, S/N = 3) for 4-NP were achieved. Additionally, the Co_xP/NC/GCE was successfully applied to detect 4-NP in tap water with good recoveries for its attractive selectivity and repeatability, which indicated that Co_xP/NC could be a promising candidate for analyzing 4-NP.

Probing the role of O-containing groups in CO2 adsorption of N-doped porous activated carbon

Porous activated carbons (PACs) are promising candidates to capture CO₂ through physical adsorption because of their chemical stability, easy-synthesis, cost-effectiveness and good recyclability. However, their low CO₂ adsorption capacity, especially low CO₂/N₂ selectivity, has limited their practical applications. In this work, an optimized PAC with a large specific surface area, a small micropore size, and a large micropore volume has been synthesized by one-step carbonization/activation of casein using K₂CO₃ as a mild activation agent. It showed a remarkably enhanced CO₂ adsorption capacity as high as 5.78 mmol g^-1 and an excellent CO₂/N₂ selectivity of 144 (25 °C, 1 bar). Based on DFT calculations and experimental results, the coexistence of adjacent pyridinic N and -OH/-NH₂ species was proposed for the first time to make an important contribution to the ultra-high CO₂ adsorption performance, especially CO₂/N₂ selectivity. This work provides effective guidance to design PAC adsorbents with high CO₂ adsorption performance. The content of pyridine N combined with -OH/-NH₂ was further elevated by additional nitrogen introduction, resulting in a further enhanced CO₂ adsorption capacity up to 5.96 mmol g^-1 (25 °C, 1 bar). All these results suggest that, in addition to the well-defined pore structure, pyridinic N with neighboring OH or NH₂ species played an important role in enhancing the CO₂ adsorption performance of PACs, thus providing effective guidance for the rational design of CO₂ adsorbents.

A remarkable adsorbent for removal of contaminants of emerging concern from water: Porous carbon derived from metal azolate framework-6

A series of metal-azolate frameworks or MAFs-MAF-4, -5, and -6-were synthesized and pyrolyzed to prepare porous carbons derived from MAFs (CDM-4, -5, -6, respectively). Not only the obtained carbons but also MAFs were characterized and applied for the adsorption of organic contaminants of emerging concern (CECs, including pharmaceuticals and personal care products) such as salicylic acid, clofibric acid, diclofenac sodium, bisphenol-A, and oxybenzone (OXB) from water. CDM-6 was found to be the most remarkable adsorbent among the tested ones (including activated carbon) for all the adsorbates. OXB was taken as a representative adsorbate for detailed adsorption studies as well as understanding the adsorption mechanism. H-bonding (H-acceptor: CDM; H-donor: CECs) was suggested as the principal mechanism for the adsorption of tested adsorbates. Finally, CDMs, especially CDM-6, were suggested as highly efficient and easily recyclable adsorbents for water purification.

Solvent-Induced Cadmium(II) Metal-Organic Frameworks with Adjustable Guest-Evacuated Porosity: Application in the Controllable Assembly of MOF-Derived Porous Carbon Materials for Supercapacitors

In this work, five new cadmium metal-organic frameworks (Cd-MOFs 1-5) have been synthesized from solvothermal reactions of Cd(NO₃ )₂ ⋅4 H₂ O with isophthalic acid and 1,4-bis(imidazol-1-yl)-benzene under different solvent systems of CH₃ OH, C₂ H₅ OH, (CH₃ )₂ CHOH, DMF, and N-methyl-2-pyrrolidone (NMP), respectively. Cd-MOF 1 shows a 3D diamondoid framework with 1D rhombic and hexagonal channels, and the porosity is 12.9 %. Cd-MOF 2 exhibits a 2D (4,4) layer with a 1D parallelogram channel and porosity of 23.6 %. Cd-MOF 3 has an 8-connected dense network with the Schäfli symbol of [4²⁴ ⋅6⁴ ] based on the Cd₆ cluster. Cd-MOFs 4-5 are isomorphous, and display an absolutely double-bridging 2D (4,4) layer with 1D tetragonal channels and porosities of 29.2 and 28.2 %, which are occupied by DMF and NMP molecules, respectively. Followed by the calcination-thermolysis procedure, Cd-MOFs 1-5 are employed as precursors to prepare MOF-derived porous carbon materials (labeled as PC-me, PC-eth, PC-ipr, PC-dmf and PC-nmp), which have the BET specific surface area of 23, 51, 10, 122, and 96 m²  g^-1 , respectively. The results demonstrate that the specific surface area of PCs is tuned by the porosity of Cd-MOFs, where the later is highly dependent on the solvent. Thereby, the specific surface area of PCs could be adjusted by the solvent used in the synthese of MOF precusors. Significantly, PCs have been further activated by KOH to obtain activated carbon materials (APCs), which possess even higher specific surface area and larger porosity. After a series of characterization and electrochemical investigations, the APC-dmf electrode exhibits the best porous properties and largest specific capacitances (153 F g^-1 at 5 mV s^-1 and 156 F g^-1 at 0.5 Ag^-1 ). Meanwhile, the APC-dmf electrode shows excellent cycling stability (ca. 84.2 % after 5000 cycles at 1 Ag^-1 ), which can be applied as a suitable electrode material for supercapacitors.

Versatile NiO/mesoporous carbon nanodisks: controlled synthesis from hexagon shaped heterobimetallic metal-organic frameworks

Hexagonal NiO/mesoporous carbon nanodisks (NiO/MCN) are facilely and controllably synthesized via constructing nickel-zinc trimesic acid heterobimetallic metal-organic framework (HMOF) disks before pyrolysis at 910 °C. Tailoring the Ni/(Zn + Ni) feed ratio and the reaction time during the HMOF synthesis creates a well-defined hexagonal carbon nanodisk with properly populated NiO nanocrystals while maintaining high porosity and conductivity. Such an elaborately fabricated NiO/MCN is highly stable, and exhibits the largest specific capacitance of 261 F g^-1 and the highest specific activity factor of 1.93 s^-1 g^-1 of any composite nanodisk during the capacitive test and 4-nitrophenol reduction, respectively.

Metal-Organic Framework-Derived FeCo-N-Doped Hollow Porous Carbon Nanocubes for Electrocatalysis in Acidic and Alkaline Media

Metal-organic frameworks (MOFs) are ideal precursors/ templates for porous carbons with homogeneous doping of active components for energy storage and conversion applications. Herein, metalloporphyrinic MOFs, PCN-224-FeCo, with adjustable molar ratio of Fe^II /Co^II alternatively residing inside the porphyrin center, were employed as precursors to afford FeCo-N-doped porous carbon (denoted as FeCo-NPC) by pyrolysis. Thanks to the hollow porous structure, the synergetic effect between highly dispersed FeN_x and CoN_x active sites accompanied with a high degree of graphitization, the optimized FeCo₂ -NPC-900 obtained by pyrolysis at 900 °C exhibits more positive half-wave potential, higher diffusion-limited current density, and better stability than the state-of-the-art Pt/C, under both alkaline and acidic media. More importantly, the current synthetic approach based on MOFs offers a rational strategy to structure- and composition-controlled porous carbons for efficient electrocatalysis.

Synthesis of ordered carbonaceous frameworks from organic crystals

Despite recent advances in the carbonization of organic crystalline solids like metal-organic frameworks or supramolecular frameworks, it has been challenging to convert crystalline organic solids into ordered carbonaceous frameworks. Herein, we report a route to attaining such ordered frameworks via the carbonization of an organic crystal of a Ni-containing cyclic porphyrin dimer (Ni₂-CPD_Py). This dimer comprises two Ni-porphyrins linked by two butadiyne (diacetylene) moieties through phenyl groups. The Ni₂-CPD_Py crystal is thermally converted into a crystalline covalent-organic framework at 581 K and is further converted into ordered carbonaceous frameworks equipped with electrical conductivity by subsequent carbonization at 873-1073 K. In addition, the porphyrin's Ni-N₄ unit is also well retained and embedded in the final framework. The resulting ordered carbonaceous frameworks exhibit an intermediate structure, between organic-based frameworks and carbon materials, with advantageous electrocatalysis. This principle enables the chemical molecular-level structural design of three-dimensional carbonaceous frameworks.Carbon-based materials are promising alternatives to noble metal catalysts, but their structures are typically disordered and difficult to control. Here, the authors obtain ordered carbonaceous frameworks with advantageous electrocatalytic properties via the carbonization of nickel-containing porphyrin dimer networks.

Thermally Stable Metal-Organic Framework-Templated Synthesis of Hierarchically Porous Metal Sulfides: Enhanced Photocatalytic Hydrogen Production

Porous nanostructured materials are demonstrated to be very promising in catalysis due to their well accessible active sites. Thermally stable metal-organic frameworks (MOFs) as hard templates are successfully utilized to afford porous metal oxides and subsequently metal sulfides by a nanocasting method. The resultant metal oxides/sulfides show considerable Brunauer-Emmett-Teller (BET) surface areas, by partially inheriting the pore character of MOF templates. Preliminary investigation on the obtained hierarchically porous CdS for water splitting, as a proof of concept, demonstrates its much higher activity than both corresponding bulk and nanosized counterparts, under visible light irradiation. Given the structural diversity and tailorability of MOFs, such synthetic approach may open an avenue to the synthesis of advanced porous materials for functional applications.