Fluorescent Metallacage-Core Supramolecular Polymer Gel Formed by Orthogonal Metal Coordination and Host-Guest Interactions

Aggregation-Induced Emissive and Circularly Polarized Homogeneous Sulfono-γ-AApeptide Foldamers

Through our continuous effort in developing a new class of foldamers, we have both designed and synthesized homogenous sulfono-γ-AApeptides using tetraphenylethylene (TPE) moieties attached to the backbone as luminogenic sidechains. Based on previous crystal structures, we have found that these foldamers adopted a left-handed 414-helix. Due to the constraint of the helical scaffold, the rotation of the TPE moieties were restricted, leading to fluorescent emissive properties with high quantum yields not only at the aggregate state but also in solution. Investigation of the relationship between the structure and fluorescence behavior reveals that emission was induced by the combined effect of the aggregation-induced emission (AIE) and the rotated restriction from the backbone. Furthermore, as the packing mode of the luminogens could be precisely adjusted by the helical backbone, these foldamers were found to be circularly polarizable with relatively large luminescence dissymmetry factor (g lum). Interestingly, possessing cationic amphipathic structures similar to that of host-defense peptides (HDPs), these sulfono-γ-AApeptides were able to inhibit the growth of Gram-positive bacteria methicillin-resistant S. aureus (MRSA) through membrane interactions.

Controlled Sol-Gel and Diversiform Nanostructure Transitions by Photoresponsive Molecular Switching of Tetraphenylethene- and Azobenzene-Functionalized Organogelators

The implementation of stimuli-responsive materials with dynamically controllable features has long been an important objective that challenges chemists in the materials science field. We report here the synthesis and characterization of [2]rotaxanes (R1 and R1-b) with a molecular shuttle and photoresponsive properties. Axles T1 and T1-b were found to be highly efficient and versatile organogelators toward various nonpolar organic solvents, especially p-xylene, with critical gelation concentrations as low as 0.67 and 0.38 w/v %, respectively. The two molecular stations of switchable [2]rotaxanes (R1 and R1-b) can be revealed or concealed by t-butylcalix[4]arene macrocycle, thus inhibiting the gelation processes of the respective axles T1 and T1-b through the control of intermolecular hydrogen-bonding interactions. The sol-gel transition of axles T1 and T1-b could be achieved by the irradiation of UV-visible light, which interconverted between the extended and contracted forms. Interestingly, the morphologies of organogels in p-xylene, including flakes, nanobelts, fibers, and vesicles depending on the molecular structures of axles T1 and T1-b, were induced by UV-visible light irradiation. Further studies revealed that acid-base-controllable and reversible self-assembled nanostructures of these axle molecules were mainly constructed by the interplay of multi-noncovalent interactions, such as intermolecular π-π stacking, CH-π, and intermolecular hydrogen-bonding interactions. Surprisingly, our TPE molecular systems (R1, R1-b, T1, and T1-b) are nonemissive in their aggregated states, suggesting that not only fluorescence resonance energy transfer but also aggregation-caused quenching may have been functioning. Finally, the mechanical strength of these organogels in various solvents was monitored by rheological experiments.

A tetraphenylethene-based Pd2L4 metallacage with aggregation-induced emission and stimuli-responsive behavior

A tetraphenylethene-based Pd2L4 metallacage was self-assembled from four TPE-pyridine ligands with two Pd2+ ions. This metallacage with D4 symmetry exhibited a classical aggregation-induced emission property in different solvents and reversible stimuli-responsive behaviour with chloride ions and silver ions, successively.

Recent developments in the construction and applications of platinum-based metallacycles and metallacages via coordination

Coordination-driven suprastructures have attracted much interest due to their unique properties. Among these structures, platinum-based architectures have been broadly studied due to their facile preparation. The resultant two- or three-dimensional (2D or 3D) systems have many advantages over their precursors, such as improved emission tuning, sensitivity as sensors, and capture and release of guests, and they have been applied in biomedical diagnosis as well as in catalysis. Herein, we review the recent results related to platinum-based coordination-driven self-assembly (CDSA), and the text is organized to emphasizes both the synthesis of new metallacycles and metallacages and their various applications.

Emissive Metallacycle-Crosslinked Supramolecular Networks with Tunable Crosslinking Densities for Bacterial Imaging and Killing

The chemical structures and topologies of the crosslinks in supramolecular networks play a crucial role in their properties and functions. Herein, the preparation of a type of poly(N-isopropylacrylamide) (PNIPAAM)-based supramolecular networks crosslinked by emissive hexagonal metallacycles is presented. The topological connections in these networks greatly affect their properties, as evidenced by their differences in absorption, emission, lower critical solution temperature, and modulus along with the variation of crosslinking densities. The integration of PNIPAAM and metallacycles in the networks benefits them improved bioavailability, making them serve as reagents for bacterial imaging and killing. This study provides a strategy to prepare cavity-crosslinked polymer networks for antibacterial applications.

Reinforced Topological Nanoassemblies: 2D Hexagon-Fused Wheel to 3D Prismatic Metallo-Lamellar Structure with Molecular Weight of 119 K Daltons

By a precise metallo-ligand design, the advanced coordination-driven self-assembly could succeed in the preparation of giant molecular weight of the metallo-architectures. However, the synthesis of a single discrete high-molecular-weight (>100 K Da) structure has not been demonstrated due to the insurmountable synthetic challenge. Herein, we present a two-dimensional wheel structure (W1) and a gigantic three-dimensional dodecagonal prism-like architecture (P1), which were generated by multicomponent self-assembly of two similar metallo-organic ligands and a core ligand with metal ions, respectively. The giant 2D-suprastructure W1 with six hexagonal metallacycles that fused to the central spoke wheel was first achieved in nearly quantitative yield, and then, directed by introducing a meta-substituted coordination site into the key ligand, the supercharged (36 Ru²⁺ and 48 Cd²⁺ ions) double-decker prismatic structure P1 with two wheel structure W1s serve as the surfaces and 12 <Tpy-Cd²⁺-Tpy> connectivities serve as the edges, where a molecular weight up to 119 498.18 Da was accomplished. The expected molecular composition and size morphology was unequivocally characterized by nuclear magnetic resonance, mass spectrometry, and transmission electron microscopy investigations. The introduction of a wheel structure is able to add considerable stability and complexity to the final architecture. These well-defined scaffolds are expected to play an important role in the functional materials field, such as molecular encapsulation and medicine sustained release.

A Zr-cluster based thermostable, self-healing and adaptive metallogel with chromogenic properties responds to multiple stimuli with reversible radical interaction

A Zr-cluster based metallogel is synthesized via an unusual one-pot solvothermal method. The resulting metallogel is robust, adaptive, self-healing, highly thermostable and conductive. Moreover, the metallogel exhibits reversible stimuli-responsive properties. The gel could respond to at least four kinds of stimuli such as light, aliphatic amines, electricity and metals with color and fluorescence tunability. Importantly, the metallogel with electrochromic properties could be used as soft electrochromic devices for smart windows and electro display boards, and metalchromism provides a practical way for coating corrosion monitoring of metal materials.

Luminescent Metallacycle-Cored Liquid Crystals Induced by Metal Coordination

Two rhomboidal metallacycles based on metal-coordination-driven self-assembly are presented. Because metal-coordination interactions restrict the rotation of phenyl groups on tetraphenylethene units, these metallacycles were emissive both in solution and in solid state, and their aggregation-induced emission properties were well-retained. Moreover, the rhomboidal metallacyclic structures offer a platform for intermolecular packing beneficial for the formation of liquid crystalline phases. Therefore, although neither of building blocks shows mesogenic properties, both thermotropic and lyotropic (in DMF) mesophases were observed in one of metallacycles, indicating that mesophases could be induced by metal-coordination interactions. This study not only reveals the mechanism for the formation of cavity-cored liquid crystals, but also provides a convenient approach to preparing supramolecular luminescent liquid crystals, which will serve as good candidates for chemo sensors and liquid crystal displays.

Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

The emergence of aggregation-induced emission luminogens (AIEgens) has significantly stimulated the development of luminescent supramolecular materials because their strong emissions in the aggregated state have resolved the notorious obstacle of the aggregation-caused quenching (ACQ) effect, thereby enabling AIEgen-based supramolecular materials to have a promising prospect in the fields of luminescent materials, sensors, bioimaging, drug delivery, and theranostics. Moreover, in contrast to conventional fluorescent molecules, the configuration of AIEgens is highly twisted in space. Investigating AIEgens and the corresponding supramolecular materials provides fundamental insights into the self-assembly of nonplanar molecules, drastically expands the building blocks of supramolecular materials, and pushes forward the frontiers of supramolecular chemistry. In this review, we will summarize the basic concepts, seminal studies, recent trends, and perspectives in the construction and applications of AIEgen-based supramolecular materials with the hope to inspire more interest and additional ideas from researchers and further advance the development of supramolecular chemistry.

Emissive Platinum(II) Cages with Reverse Fluorescence Resonance Energy Transfer for Multiple Sensing

It is quite challenging to realize fluorescence resonance energy transfer (FRET) between two chromophores with specific positions and directions. Herein, through the self-assembly of two carefully selected fluorescent ligands via metal-coordination interactions, we prepared two tetragonal prismatic platinum(II) cages with a reverse FRET process between their faces and pillars. Bearing different responses to external stimuli, these two emissive ligands are able to tune the FRET process, thus making the cages sensitive to solvents, pressure, and temperature. First, these cages could distinguish structurally similar alcohols such as n-butanol, t-butanol, and i-butanol. Furthermore, they showed decreased emission with bathochromic shifts under high pressure. Finally, they exhibited a remarkable ratiometric response to temperature over a wide range (223-353 K) with high sensitivity. For example, by plotting the ratio of the maximum emission (I₆₀₀/I₄₈₀) of metallacage 4b against the temperature, the slope reaches 0.072, which is among the highest values for ratiometric fluorescent thermometers reported so far. This work not only offers a strategy to manipulate the FRET efficiency in emissive supramolecular coordination complexes but also paves the way for the future design and preparation of smart emissive materials with external stimuli responsiveness.

A dual redox-responsive supramolecular polymer driven by molecular recognition between bisporphyrin and trinitrofluorenone

A dual redox-responsive supramolecular polymer driven by molecular recognition between bisporphyrin (bisPor) and trinitrofluorenone (TNF) has been developed.

Preparation of a mechanically interlocked polymer from a linear supramolecular polymer

We transformed a linear supramolecular polymer into a mechanically interlocked polymer by photoisomerization.

Metal–organic polyhedra crosslinked supramolecular polymeric elastomers

Supramolecular polymeric elastomers crosslinked by metal–organic polyhedra were developed, featuring not only tunable mechanical properties but also dynamic actuation behaviors.

A fluorescent platinum(ii) metallacycle-cored supramolecular network formed by dynamic covalent bonds and its application in halogen ions and picric acid detection

A fluorescent supramolecular network for halogen ions and picric acid detection was prepared by linking metallacycles using dynamic covalent bonds.

Self-Healing Heterometallic Supramolecular Polymers Constructed by Hierarchical Assembly of Triply Orthogonal Interactions with Tunable Photophysical Properties

Here, we present a method for the building of new bicyclic heterometallic cross-linked supramolecular polymers by hierarchical unification of three types of orthogonal noncovalent interactions, including platinum(II)-pyridine coordination-driven self-assembly, zinc-terpyridine complex, and host-guest interactions. The platinum-pyridine coordination provides the primary driving force to form discrete rhomboidal metallacycles. The assembly does not interfere with the zinc-terpyridine complexes, which link the discrete metallacycles into linear supramolecular polymers, and the conjugation length is extended upon the formation of the zinc-terpyridine complexes, which red-shifts the absorption and emission spectra. Finally, host-guest interactions via bis-ammonium salt binding to the benzo-21-crown-7 (B21C7) groups on the platinum acceptors afford the cross-linked supramolecular polymers. By continuous increase of the concentration of the supramolecular polymer to a relatively high level, supramolecular polymer gel is obtained, which exhibits self-healing properties and reversible gel-sol transitions stimulated by various external stimuli, including temperature, K⁺, and cyclen. Moreover, the photophysical properties of the supramolecular polymers could be effectively tuned by varying the substituents of the precursor ligands.

Assembling Pentatopic Terpyridine Ligands with Three Types of Coordination Moieties into a Giant Supramolecular Hexagonal Prism: Synthesis, Self-Assembly, Characterization, and Antimicrobial Study

Three dimensional (3D) supramolecules with giant cavities are attractive due to their wide range of applications. Herein, we used pentatopic terpyridine ligands with three types of coordination moieties to assemble two giant supramolecular hexagonal prisms with a molecular weight up to 42 608 and 43 569 Da, respectively. Within the prisms, two double-rimmed Kandinsky Circles serve as the base surfaces as well as the templates for assisting the self-sorting during the self-assembly. Additionally, hierarchical self-assembly of these supramolecular prisms into tubular-like nanostructures was fully studied by scanning tunneling microscopy (STM) and small-angle X-ray scattering (SAXS). Finally, these supramolecular prisms show good antimicrobial activities against Gram-positive pathogen methicillin-resistant Staphylococcus aureus (MRSA) and Bacillus subtilis (B. subtilis).

Rotation Restricted Emission and Antenna Effect in Single Metal-Organic Frameworks

Aggregation induced-emission (AIE) and antenna effects are important luminescence behaviors. Thus, investigating their emission mechanisms and revealing their behaviors have become critical but challenging. Here we design and prepare metal-organic frameworks (MOFs) with an AIE ligand (i.e., tetrakis(4-carboxyphenyl)pyrazine (L1)) and Ln³⁺ ions (including Eu³⁺, Tb³⁺, and Gd³⁺). The emission from L1 is gradually enhanced during the formation of the MOFs because coordination restricts the intramolecular rotation. Thus, the emission is called as coordination-induced emission (CIE) with the same restriction of intramolecular rotation mechanism as AIE. Meanwhile, benzene rings twist to adapt to the MOFs' rigid structure, so the emission blueshifts gradually, as an additional evidence of CIE. Both AIE and CIE are "rotation-restricted emission (RRE)". Eu³⁺ ions exhibit the strongest emission with gradually enhanced intensity during the formation of L1-Eu MOF. Combined with emission properties from Tb³⁺ and Gd³⁺ ions, the antenna effect is verified. We also validate the conditions for the efficient sensitization of Ln³⁺ ions experimentally and refresh the threshold value of the energy gap between triplet state of a ligand and excited state of Ln³⁺ ions to 3000 cm^-1. Thus, RRE and antenna effects are revealed and validated simultaneously. Because CIE of L1 and antenna effect emission from Eu³⁺ ions are enhanced simultaneously as strong dual emissions, ratiometric fluorescence detection is realized with the detection of arginine as a model. Our results incorporate AIE and CIE into RRE, which provides explicit information for the construction and application of emission systems with AIE ligands as building blocks. MOFs are also extended to explore the emission mechanism and the energy transfer between ligands and metal ions.

One-Step Preparation of a Highly Stretchable, Conductive, and Transparent Poly(vinyl alcohol)-Phytic Acid Hydrogel for Casual Writing Circuits

Conductive hydrogels have shown great potential applications in a wide variety of fields, including artificial intelligence devices and biomedical engineering. However, it still remains a great challenge to develop a facile and cost-effective approach to achieve a conductive hydrogel with favorable qualities. Herein, we have changed the traditional ingredient of poly(vinyl alcohol) (PVA) hydrogel by the addition of phytic acid (PA), which could yield a conductive hydrogel through one freeze-thaw cycle. The PVA-PA hydrogel holds several virtues including a large stretchability (about 1100% strain), excellent conductivity (1.34 kΩ cm), and high optical transparence (about 95%). By assembling the PVA-PA hydrogel into a wearable strain sensor, the gel-based sensor has shown good performance for the real-time monitoring of human daily activities and health conditions. Moreover, one formula of the PVA-PA sol ink could rapidly convert to the gel state just by being injected on a flexible substrate under an ice-bath, which would satisfy the demand of casual writing circuits. This one-step preparation method of the PVA-PA hydrogel may open an innovative avenue for the fabrication of easy-molding and functional hydrogels with only two components under mild ambient conditions.

Ion-Pair Complexes of Pyrylium and Tetraarylborate as New Host-Guest Dyes: Photoinduced Electron Transfer Promoting Radical Polymerization

Ultrafast transient absorption spectroscopy, NOESY-NMR, and EPR spectroscopy shed light on how π-π stacking interactions combined with electrostatic interactions can be used to form stable ion-pair complexes between pyrylium and tetraarylborate ions in which the interaction of the π-delocalized clouds promotes the observation of new radiative processes and also electron transfer processes excitation using visible light. The results exhibit a striking combination of properties, chemical stability and photophysical and photochemical events, that make these ion-pair complexes as a step toward the realization of chromophore/luminescent materials and also their use as a new monophotoinitiator system in radical polymerization reactions.

Helical Sulfono-γ-AApeptides with Aggregation-Induced Emission and Circularly Polarized Luminescence

Aggregation-induced emission (AIE) was intensively studied because of packing of small molecules and polymers; however, mid-molecular-weight (1000-3000) molecular scaffold containing a precise number of AIE luminogens is rare. Herein, we report the investigation of three tetraphenylethylene (TPE)-modified sulfono-γ-AApeptides in which multiple TPE moieties are conjugated to the chiral right-handed helical peptidomimetic backbone as functional side chains. The crystal structure of the TPE-α/sulfono-γ-AA peptide 1 demonstrates that because of the rigid helical scaffold of the TPE-α/sulfono-γ-AA peptides, the intramolecular rotations of the TPE with short linker are restricted, therefore leading to the boosted fluorescent emission in solution. Peptides 2 and 3 exhibit aggregation-induced emission enhancement (AIEE), possibly because of the combination of both AIE and rotation restriction. Moreover, because of their preoriented assembly induced by the right-handed helical scaffold, these emissive chiral luminogens show effective circularly polarized luminescence signals with high dissymmetry factor glum. Finally, the amphiphilic nature of TPE-α/sulfono-γ-AA peptides could enable them to penetrate the bacterial membranes and exhibit strong fluorescence. Their antimicrobial activity and labeling-free character could further augment their potential applications in both materials and biomedical sciences.

Embedding and Positioning of Two FeII4 L4 Cages in Supramolecular Tripeptide Gels for Selective Chemical Segregation

An unreported d,l-tripeptide self-assembled into gels that embedded FeII4 L4 metal-organic cages to form materials that were characterized by TEM, EDX, Raman spectroscopy, rheometry, UV/Vis and NMR spectroscopy, and circular dichroism. The cage type and concentration modulated gel viscoelasticity, and thus the diffusion rate of molecular guests through the nanostructured matrix, as gauged by 19 F and 1 H NMR spectroscopy. When two different cages were added to spatially separated gel layers, the gel-cage composite material enabled the spatial segregation of a mixture of guests that diffused into the gel. Each cage selectively encapsulated its preferred guest during diffusion. We thus present a new strategy for using nested supramolecular interactions to enable the separation of small molecules.

Synthesis and Characterization of Polyhydroxyalkanoate Organo/Hydrogels

Synthetic organogels/hydrogels are attracting growing interests due to their potential applications in biomedical fields, organic electronics, and photovoltaics. Photogelation methods for synthesis of organogels/hydrogels have been shown particularly promising because of the high efficiency and simple synthetic procedures. This study synthesized new biodegradable polyhydroxyalkanoates (PHA)-based organogels/hydrogels via UV photo-cross-linking using unsaturated PHA copolymer poly[(R)-3-hydroxyundecanoate-co-(R)-3-hydroxy-10-undecenoate] (PHU10U) with polyethylene glycol dithiol (PDT) as a photo-cross-linker. The PHU10U was synthesized by an engineered Pseudomonas entomophila and characterized via Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance (NMR), and ¹³C NMR. With decreasing the molar ratio of PHU10U to PDT, both the swelling ratio and pore size were decreased. Meanwhile, increasing densities of the gel networks resulted in a higher compressive modulus. Cell cytotoxicity studies based on the CCK-8 assay on both the PHU10U precursor and PHU10U/PDT hydrogels showed that the novel PHA-based biodegradables acting as hydrogels possess good biocompatibility.

Aqueous Platinum(II)-Cage-Based Light-Harvesting System for Photocatalytic Cross-Coupling Hydrogen Evolution Reaction

Photosynthesis is a process wherein the chromophores in plants and bacteria absorb light and convert it into chemical energy. To mimic this process, an emissive poly(ethylene glycol)-decorated tetragonal prismatic platinum(II) cage was prepared and used as the donor molecule to construct a light-harvesting system in water. Eosin Y was chosen as the acceptor because of its good spectral overlap with that of the metallacage, which is essential for the preparation of light-harvesting systems. Such a combination showed enhanced catalytic activity in catalyzing the cross-coupling hydrogen evolution reaction, as compared with eosin Y alone. This study offers a pathway for using the output energy from the light-harvesting system to mimic the whole photosynthetic process.

Stimuli-Responsive Room-Temperature N-Heteroacene Liquid: In Situ Observation of the Self-Assembling Process and Its Multiple Properties

A novel stimuli-responsive room-temperature photoluminescent liquid 1 based on the N-heteroacene framework is developed and analyzed by several experiments such as differential scanning calorimetry, X-ray diffraction, dynamic viscoelasticity measurement, in situ observation by optical and polarized optical microscopes, UV-vis absorption and fluorescence spectroscopy, and by theoretical methods such as ab initio calculation and molecular dynamics (MD) computer simulation techniques. In contrast to stimuli-responsive solid materials reported previously, liquid 1 in response to HCl vapor as a single stimulus can involve dramatically multiple changes in physical properties such as rheological behavior, morphology, as well as photoluminescence. The present ab initio calculation and microsecond-timescale MD simulations reveal that the complexation of 1 and HCl molecules induces a large dipole moment, leading to the formation of stacking structures because of their dipole-dipole interaction. Upon exposure to HCl vapor, in situ microscopic observation of the stimuli-responsive liquid elucidates a self-assembling process involving the formation of the wrinkle structure in a micrometer scale, indicating disorder-order phase transition. Further exposure of 1 to HCl vapor from seconds to hours has an influence on the macroscopic physical properties such as viscosity, viscoelasticity, and photoluminescent colors. The synergy between the experimental and theoretical investigations opens a new strategy to develop a novel class of stimuli-responsive materials showing multiple changes in physical properties.

Soft Materials with Diverse Suprastructures via the Self-Assembly of Metal-Organic Complexes

Inspired by assemblies in the natural world, researchers have prepared diverse suprastructures with distinct spatial arrangements by artificial self-assembly, including micelles, vesicles, ribbons, films, fibers, and tubes. The field of assembly is undergoing a transition from single-component to multicomponent assembly and single-step to multistep processing. Control over the size, shape, and composition of these building blocks has enabled the formation of suprastructures with substantial structural diversity. More importantly, harnessing noncovalent interactions to create suprastructures in a controlled manner will lead to a better understanding of the formation of complex self-organized patterns. However, for the construction of multiscale self-assemblies with controllable shapes and functions, the selection of a suitable protocol remains challenging. Coordination-driven self-assembly provides a bottom-up approach to construct various metal-organic complexes (MOCs), which could be further used as building blocks with controllable shapes and sizes. Despite the tremendous progress made in the design of MOC-based supramolecular materials, most of these MOCs have dimensions of only several nanometers, and investigations of these structures rely on the characterization of their crystal structure. However, most of the functional suprastructures in living organisms have dimensions ranging from microns to centimeters and have the form of soft materials. Thus, obtaining MOC-based highly ordered materials of larger size remains a challenge. This Account focuses on our recent advances in the construction of soft suprastructure materials with MOCs. A series of functionalized MOCs was first constructed through coordination-driven self-assembly. Then, further self-assembly of the as-prepared MOCs gave rise to the formation of higher-order structures. By changing the functional groups in the acceptors and donors in the MOCs, different suprastructures, including nanospheres, nanodiamonds, nanorods, nanofibers, membranes, films, and gels, were prepared. These studies suggest that using MOCs as building blocks is a highly efficient strategy to achieve complex architectures and functional materials for the development of desired MOC-based soft materials with high precision and fidelity.

Self-Assembly of Aggregation-Induced-Emission Molecules

The last decade has witnessed rapid developments in aggregation-induced emission (AIE). In contrast to traditional aggregation, which causes luminescence quenching (ACQ), AIE is a reverse phenomenon that allows robust luminescence to be retained in aggregated and solid states. This makes it possible to fabricate various highly efficient luminescent materials, which opens new paradigms in a number of fields, such as imaging, sensing, medical therapy, light harvesting, light-emitting devices, and organic electronic devices. Of the various important features of AIE molecules, their self-assembly behavior is very attractive because the formation of a well-defined emissive nanostructure may lead to advanced applications in diverse fields. However, due to the nonplanar topology of AIEgens, it is not easy for them to self-assemble into well-defined structures. To date, some strategies have been proposed to achieve the self-assembly of AIEgens. Herein, we summarize the most recent approaches for the self-assembly of AIE molecules. These approaches can be sorted into two classes: 1) covalent molecular design and 2) noncovalent supramolecular interactions. We hope this will inspire more excellent work in the field of AIE.

Multicomponent Porphyrin-Based Tetragonal Prismatic Metallacages and their Photophysical Properties

Multicomponent coordination-driven self-assembly has proved to be a convenient approach to prepare advanced supramolecular coordination complexes (SCCs), especially for those with three-dimensional structures. Herein, we report the preparation of three tetragonal prismatic cages via the self-assembly of Pt(PEt₃)₂(OTf)₂, three different linear dipyridyl ligands and porphyrin-based sodium benzoate ligands. Due to the efficient charge separation in the coordination process of Pt(PEt₃)₂(OTf)₂ with pyridine and carboxylic acid and the directionality of metal-coordination bonds, these cages were prepared in high isolated yields (more than 90%). The absorption and emission properties as well as the singlet oxygen quantum yields of these cages were also studied, showing their potential applications as contrast agents for bio-imaging and photosensitizers for photodynamic therapy.