Correlating physico-chemical with toxicological properties of nanoparticles: the present and the future

Gold nanoparticles with different amino acid surfaces: serum albumin adsorption, intracellular uptake and cytotoxicity

Gold nanoparticles with aspartate, glycine, leucine, lysine, and serine surfaces were produced from the mixed solutions of HAuCl4 and respective amino acids via UV irradiation. The amino acids bind to the nanoparticle surfaces via amine groups and their carboxylic groups extend out to stabilize the nanoparticles. The nanoparticles have diameters of 15-47 nm in pH 7.4 aqueous solution and have diameters of 62-73 nm after 48 h incubation in cell culture containing serum. The nanoparticles adsorb human and bovine serum albumins on their surfaces by specific interactions, characterized by the intrinsic fluorescence quenching of the albumins. The albumin adsorption effectively decreases the aggregation of the nanoparticles in cell culture and also decreases the intracellular uptake of the nanoparticles. The gold nanoparticles produced from leucine and lysine, which have amphiphilic groups on their surfaces, present better biocompatibility than the other gold nanoparticles.

Manufactured nanomaterials: categorization and approaches to hazard assessment

Nanotechnology offers enormous potential for technological progress. Fortunately, early and intensive efforts have been invested in investigating toxicology and safety aspects of this new technology. However, despite there being more than 6,000 publications on nanotoxicology, some key questions still have to be answered and paradigms need to be challenged. Here, we present a view on the field of nanotoxicology to stimulate the discussion on major knowledge gaps and the critical appraisal of concepts or dogma. First, in the ongoing debate as to whether nanoparticles may harbour a specific toxicity due to their size, we support the view that there is at present no evidence of 'nanospecific' mechanisms of action; no step-change in hazard was observed so far for particles below 100 nm in one dimension. Therefore, it seems unjustified to consider all consumer products containing nanoparticles a priori as hazardous. Second, there is no evidence so far that fundamentally different biokinetics of nanoparticles would trigger toxicity. However, data are sparse whether nanoparticles may accumulate to an extent high enough to cause chronic adverse effects. To facilitate hazard assessment, we propose to group nanomaterials into three categories according to the route of exposure and mode of action, respectively: Category 1 comprises nanomaterials for which toxicity is mediated by the specific chemical properties of its components, such as released ions or functional groups on the surface. Nanomaterials belonging to this category have to be evaluated on a case-by-case basis, depending on their chemical identity. Category 2 focuses on rigid biopersistent respirable fibrous nanomaterials with a specific geometry and high aspect ratio (so-called WHO fibres). For these fibres, hazard assessment can be based on the experiences with asbestos. Category 3 focuses on respirable granular biodurable particles (GBP) which, after inhalation, may cause inflammation and secondary mutagenicity that may finally lead to lung cancer. After intravenous, oral or dermal exposure, nanoscaled GBPs investigated apparently did not show 'nanospecific' effects so far. Hazard assessment of GBPs may be based on the knowledge available for granular particles. In conclusion, we believe the proposed categorization system will facilitate future hazard assessments.

Periodic table-based descriptors to encode cytotoxicity profile of metal oxide nanoparticles: a mechanistic QSTR approach

Nanotechnology has evolved as a frontrunner in the development of modern science. Current studies have established toxicity of some nanoparticles to human and environment. Lack of sufficient data and low adequacy of experimental protocols hinder comprehensive risk assessment of nanoparticles (NPs). In the present work, metal electronegativity (χ), the charge of the metal cation corresponding to a given oxide (χox), atomic number and valence electron number of the metal have been used as simple molecular descriptors to build up quantitative structure-toxicity relationship (QSTR) models for prediction of cytotoxicity of metal oxide NPs to bacteria Escherichia coli. These descriptors can be easily obtained from molecular formula and information acquired from periodic table in no time. It has been shown that a simple molecular descriptor χox can efficiently encode cytotoxicity of metal oxides leading to models with high statistical quality as well as interpretability. Based on this model and previously published experimental results, we have hypothesized the most probable mechanism of the cytotoxicity of metal oxide nanoparticles to E. coli. Moreover, the required information for descriptor calculation is independent of size range of NPs, nullifying a significant problem that various physical properties of NPs change for different size ranges.

Resolution of the mediators of in vitro oxidative reactivity in size-segregated fractions that may be masked in the urban PM(10) cocktail

PM10 (particulate matter 10 μm or less in aerodynamic diameter) has consistently been linked with adverse human health effects, but the physicochemical properties responsible for this effect have not been fully elucidated. The aim of this work was to investigate the potential for carbon black (CB) particles and PM to generate ROS (Reactive Oxygen Species) and to identify the physicochemical properties of the particles responsible for in vitro oxidative reactivity (OR). PM10 was collected in 11 size fractions at a traffic site in Swansea, UK, using an Electrical Low Pressure Impactor (ELPI). The PM physicochemical properties (including size, morphology, type, and transition metals) were tested. The plasmid scission assay (PSA) was used for OR testing of all particles. The ultrafine and fine PM fractions (N28-2399; 28-2399 nm) caused more DNA damage than coarse PM (N2400-10,000), and the increased capacity of the smaller particles to exhibit enhanced (OR) was statistically significant (p<0.05). The most bioreactive fraction of PM was N94-155 with a toxic dose (TD50; mass dose capable of generating 50% plasmid DNA damage) of 69 μg/ml. The mean TD35 was lower for PM than CB particles, indicating enhanced OR for PM. A difference between CB and PM in this study was the higher transition metal content of PM. Zn was the most abundant transition metal (by weight) in the ultrafine-fine PM fractions, and Fe in the fine-coarse PM. Through this comparison, part of the observed increased PM OR was attributed to Zn (and Fe). In this study PM-derived DNA damage was dependent upon; 1) particle size, 2) surface area, and 2) transition metals. This study supports the view that ROS formation by PM10 is related to physicochemistry using evidence with an increased particle size resolution.

Towards understanding mechanisms governing cytotoxicity of metal oxides nanoparticles: hints from nano-QSAR studies

The production of nanomaterials increases every year exponentially and therefore the probability these novel materials that they could cause adverse outcomes for human health and the environment also expands rapidly. We proposed two types of mechanisms of toxic action that are collectively applied in a nano-QSAR model, which provides governance over the toxicity of metal oxide nanoparticles to the human keratinocyte cell line (HaCaT). The combined experimental-theoretical studies allowed the development of an interpretative nano-QSAR model describing the toxicity of 18 nano-metal oxides to the HaCaT cell line, which is a common in vitro model for keratinocyte response during toxic dermal exposure. The comparison of the toxicity of metal oxide nanoparticles to bacteria Escherichia coli (prokaryotic system) and a human keratinocyte cell line (eukaryotic system), resulted in the hypothesis that different modes of toxic action occur between prokaryotic and eukaryotic systems.

Interaction of nanoparticles with lipid membranes: a multiscale perspective

Freestanding lipid bilayers were challenged with 15 nm Au nanospheres either coated by a citrate layer or passivated by a protein corona. The effect of Au nanospheres on the bilayer morphology, permeability and fluidity presents strong differences or similarities, depending on the observation length scale, from the colloidal to the molecular domains. These findings suggest that the interaction between nanoparticles and lipid membranes should be conveniently treated as a multiscale phenomenon.

Pulmonary fibrotic response to inhalation of ZnO nanoparticles and toluene co-exposure through directed flow nose only exposure chamber

The increasing use of Zinc Oxide nanoparticles (ZnONPs) in paint industry is not supplemented with adequate toxicology data. This report focuses on the fibrogenic toxicity caused due to co-exposure of ZnONPs and toluene in male Wistar rats, exposed for 28 days, through directed flow nose only exposure chamber. The rats were grouped as air control, toluene control (200 ppm), zinc oxide control (10 mg/m(3)), low dose co-exposed (5 mg/m(3) ZnO and 200 ppm of toluene) and high dose co-exposed (10 mg/m(3) of ZnO and 200 ppm of toluene). Our study demonstrates that co-exposure of ZnONPs and toluene (as in paint industry), even at their respective permissible exposure level (5 mg/m(3) for ZnO and 200 ppm for toluene) have the potential to produce a progressive inflammatory and fibrotic response in the alveolar tissues of the lungs. We observed a significant increase in inflammatory markers in BAL fluid and elevated malondialdehyde (MDA) levels with lower levels of intracellular reduced glutathione (GSH) in lungs of rats of co-exposed group. Significant increase in the levels of pro-inflammatory mediators (IL-6, Ikβα, Cox-II, p-NF-κB) in lung tissues also indicated pulmonary damage. To best of our knowledge this is the first study which highlights the toxicity of co-exposed ZnO NPs and toluene.

Nanoparticles and Pop-off Technique for Electron Microscopy

Because of the size of the nanoparticles, their detection and exact anatomical localization in tissue samples are very difficult. Consequently, suitable methods are needed to prove their presence, especially co-localized to histological lesions. Therefore, the aim of this study was to investigate whether nanoparticles were detectable in specimens after reprocessing samples from glass slides using the pop-off technique. Tissue slides containing agglomerates of titanium dioxide nanoparticles already visible on a light microscopic level and amorphous silicium dioxide (SiO2) particles not observable in tissue slides were reprocessed. Furthermore, cytospots of bronchoalveolar lavage acquired from rats that previously inhaled carbon nanotubes were used. After reprocessing the samples, they were investigated using transmission electron microscopy. In all the reprocessed samples, the respective nanoparticles were detectable. Even the light microscopically invisible amorphous SiO2 particles were observed as electron dense structures. Titanium and silicium were additionally confirmed in the respective nanoparticles by energy-dispersive X-ray spectroscopy (EDX). In summary, the pop-off technique represents a fast and easy way to detect nanoparticles in histological sections. This enables further characterization of these particles by additional techniques such as EDX, and their direct correlation with light microscopic lesions at exactly the same location is investigated.

An integrated approach for the in vitro dosimetry of engineered nanomaterials

BACKGROUND

There is a great need for screening tools capable of rapidly assessing nanomaterial toxicity. One impediment to the development of reliable in vitro screening methods is the need for accurate measures of cellular dose. We present here a methodology that enables accurate determination of delivered to cell dose metrics. This methodology includes (1) standardization of engineered nanomaterial (ENM) suspension preparation; (2) measurement of ENM characteristics controlling delivery to cells in culture; and (3) calculation of delivered dose as a function of exposure time using the ISDD model. The approach is validated against experimentally measured doses, and simplified analytical expressions for the delivered dose (Relevant In Vitro Dose (RID)f function) are derived for 20 ENMs. These functions can be used by nanotoxicologists to accurately calculate the total mass (RIDM), surface area (RIDSA), or particle number (RIDN) delivered to cells as a function of exposure time.

RESULTS

The proposed methodology was used to derive the effective density, agglomerate diameter and RID functions for 17 industrially-relevant metal and metal oxide ENMs, two carbonaceous nanoparticles, and non-agglomerating gold nanospheres, for two well plate configurations (96 and 384 well plates). For agglomerating ENMs, the measured effective density was on average 60% below the material density. We report great variability in delivered dose metrics, with some materials depositing within 24 hours while others require over 100 hours for delivery to cells. A neutron-activated tracer particle system was employed to validate the proposed in vitro dosimetry methodology for a number of ENMs (measured delivered to cell dose within 9% of estimated).

CONCLUSIONS

Our findings confirm and extend experimental and computational evidence that agglomerate characteristics affect the dose delivered to cells. Therefore measurement of these characteristics is critical for effective use of in vitro systems for nanotoxicology. The mixed experimental/computational approach to cellular dosimetry proposed and validated here can be used by nanotoxicologists to accurately calculate the delivered to cell dose metrics for various ENMs and in vitro conditions as a function of exposure time. The RID functions and characterization data for widely used ENMs presented here can together be used by experimentalists to design and interpret toxicity studies.

Less is more: long-term in vitro exposure to low levels of silver nanoparticles provides new insights for nanomaterial evaluation

In view of the vast number of new nanomaterials (NMs) that require testing and the constraints associated with animal models, the majority of studies to elucidate nanotoxicological effects have occurred in vitro, with limited correlation and applicability to in vivo systems and realistic, occupational exposure scenarios. In this study, we developed and implemented a chronic in vitro model coupled with lower, regulatory dosages in order to provide a more realistic assessment of NM-dependent consequences and illuminate the implications of long-term NM exposure. When keratinocytes were exposed to 50 nm silver nanoparticles (Ag-NPs), we determined that chronically dosed cells operated under augmented stress and modified functionality in comparison to their acute counterparts. Specifically, Ag-NP exposure through a chronic mechanism increased p38 activation, actin disorganization, heightened ki67 expression, and extensive gene modification. Additionally, chronic Ag-NP exposure altered the way in which cells perceived and responded to epidermal growth factor stimulation, indicating a transformation of cell functionality. Most importantly, this study demonstrated that chronic exposure in the pg/mL range to Ag-NPs did not induce a cytotoxic response, but instead activated sustained stress and signaling responses, suggesting that cells are able to cope with prolonged, low levels of Ag-NP exposure. In summary, we demonstrated that through implementation of a chronic dosimetry paradigm, which more closely resembles realistic NM exposure scenarios, it is possible to illuminate long-term cellular consequences, which greatly differ from previously obtained acute assessments.

Estimating the effective density of engineered nanomaterials for in vitro dosimetry

The need for accurate in vitro dosimetry remains a major obstacle to the development of cost-effective toxicological screening methods for engineered nanomaterials. An important key to accurate in vitro dosimetry is the characterization of sedimentation and diffusion rates of nanoparticles suspended in culture media, which largely depend upon the effective density and diameter of formed agglomerates in suspension. Here we present a rapid and inexpensive method for accurately measuring the effective density of nano-agglomerates in suspension. This novel method is based on the volume of the pellet obtained by bench-top centrifugation of nanomaterial suspensions in a packed cell volume tube, and is validated against gold-standard analytical ultracentrifugation data. This simple and cost-effective method allows nanotoxicologists to correctly model nanoparticle transport, and thus attain accurate dosimetry in cell culture systems, which will greatly advance the development of reliable and efficient methods for toxicological testing and investigation of nano-bio interactions in vitro.

Comparative cytotoxicity studies of carbon-encapsulated iron nanoparticles in murine glioma cells

Carbon-encapsulated iron nanoparticles (CEINs) have recently emerged as a new class of magnetic nanomaterials with a great potential for an increasing number of biomedical applications. To address the current deficient knowledge of cellular responses due to CEIN exposures, we focused on the investigation of internalization profile and resulting cytotoxic effects of CEINs (0.0001-100 μg/ml) in murine glioma cells (GL261) in vitro. The studied CEIN samples were characterized (TEM, FT-IR, Zeta potential, Boehm titration) and examined as raw and purified nanomaterials with various surface chemistry composition. Of the four type CEINs (the mean diameter 47-56 nm) studied here, the as-synthesized raw nanoparticles (Fe@C/Fe) exhibited high cytotoxic effects on the plasma cell membrane (LDH, Calcein AM/PI) and mitochondria (MTT, JC-1) causing some pro-apoptotic evens (Annexin V/PI) in glioma cells. The effects of the purified (Fe@C) and surface-modified (Fe@C-COOH and Fe@C-(CH2)2COOH) CEINs were found in quite similar patterns; however, most of these cytotoxic events were slightly diminished compared to those induced by Fe@C/Fe. The study showed that the surface-functionalized CEINs affected the cell cycle progression in both S and G2/M phases to a greater extent compared to that of the rest of nanoparticles studied to data. Taken all together, the present results highlight the importance of the rational design of CEINs as their physicochemical features such as morphology, hydrodynamic size, impurity profiles, and especially surface characteristics are critical determinants of different cytotoxic responses.

The effect of nanoparticle degradation on amphiphilic polymer-coated quantum dot toxicity: the importance of particle functionality assessment in toxicology [corrected]

Colloidal semiconductor nanoparticles (quantum dots) have attracted a lot of interest in technological and biomedical research, given their potent fluorescent properties. However, the use of heavy-metal-containing nanoparticles remains an issue of debate. The possible toxic effects of quantum dots remain a hot research topic and several questions such as possible intracellular degradation of quantum dots and the effect thereof on both cell viability and particle functionality remain unresolved. In the present work, amphiphilic polymer [corrected] coated CdSe/ZnS quantum dots were synthesized and characterized, after which their effects on cultured cells were evaluated using a multiparametric setup. The data reveal that the quantum dots are taken up through endocytosis and when exposed to the low pH of the endosomal structures, they partially degrade and release cadmium ions, which lowers their fluorescence intensity and augments particle toxicity. Using the multiparametric method, the quantum dots were evaluated at non-toxic doses in terms of their ability to visualize labeled cells for longer time periods. The data revealed that comparing different particles in terms of their applied dose is challenging, likely due to difficulties in obtaining accurate nanoparticle concentrations, but evaluating particle toxicity in terms of their biological functionality enables an easy and straightforward comparison.

[Subcellular distribution and genotoxicity of silica nanoparticles in human bronchial epithelial cells]

背景与目的

纳米二氧化硅广泛应用于社会生产生活中，肺部是吸入暴露纳米二氧化硅的主要靶器官，因此，二氧化硅对肺部的生物毒性作用引起人们的广泛关注。本研究旨在探讨纳米二氧化硅在人支气管上皮细胞内的亚细胞分布和遗传毒性。

方法

应用透射电子显微镜（transmission electron microscope, TEM）观察不同粒径二氧化硅在人支气管上皮细胞（immortalized human bronchial epithelium cells, BEAS-2B）内的亚细胞分布；应用单细胞凝胶电泳检测不同粒径二氧化硅处理BEAS-2B细胞24 h后的DNA损伤，了解不同粒径二氧化硅的遗传毒性作用。

结果

透射电镜观察到微米二氧化硅不能进入细胞，纳米二氧化硅赋存在细胞质，纳米二氧化硅导致线粒体、内质网等细胞器损伤。纳米二氧化硅导致比微米二氧化硅更严重的DNA损伤（P < 0.05）。

结论

二氧化硅的粒径决定二氧化硅颗粒物是否能进入细胞及在细胞内的分布，纳米二氧化硅对细胞遗传毒性比微米二氧化硅严重。

Nano-quantitative structure-activity relationship modeling using easily computable and interpretable descriptors for uptake of magnetofluorescent engineered nanoparticles in pancreatic cancer cells

As experimental evaluation of the safety of nanoparticles (NPs) is expensive and time-consuming, computational approaches have been found to be an efficient alternative for predicting the potential toxicity of new NPs before mass production. In this background, we have developed here a regression-based nano quantitative structure-activity relationship (nano-QSAR) model to establish statistically significant relationships between the measured cellular uptakes of 109 magnetofluorescent NPs in pancreatic cancer cells with their physical, chemical, and structural properties encoded within easily computable, interpretable and reproducible descriptors. The developed model was rigorously validated internally as well as externally with the application of the principles of Organization for Economic Cooperation and Development (OECD). The test for domain of applicability was also carried out for checking reliability of the predictions. Important fragments contributing to higher/lower cellular uptake of NPs were identified through critical analysis and interpretation of the developed model. Considering all these identified structural attributes, one can choose or design safe, economical and suitable surface modifiers for NPs. The presented approach provides rich information in the context of virtual screening of relevant NP libraries.

Intracellular signal modulation by nanomaterials

A thorough understanding of the interactions of nanomaterials with biological systems and the resulting activation of signal transduction pathways is essential for the development of safe and consumer friendly nanotechnology. Here we present an overview of signaling pathways induced by nanomaterial exposures and describe the possible correlation of their physicochemical characteristics with biological outcomes. In addition to the hierarchical oxidative stress model and a review of the intrinsic and cell-mediated mechanisms of reactive oxygen species (ROS) generating capacities of nanomaterials, we also discuss other oxidative stress dependent and independent cellular signaling pathways. Induction of the inflammasome, calcium signaling, and endoplasmic reticulum stress are reviewed. Furthermore, the uptake mechanisms can be of crucial importance for the cytotoxicity of nanomaterials and membrane-dependent signaling pathways have also been shown to be responsible for cellular effects of nanomaterials. Epigenetic regulation by nanomaterials, effects of nanoparticle-protein interactions on cell signaling pathways, and the induction of various cell death modalities by nanomaterials are described. We describe the common trigger mechanisms shared by various nanomaterials to induce cell death pathways and describe the interplay of different modalities in orchestrating the final outcome after nanomaterial exposures. A better understanding of signal modulations induced by nanomaterials is not only essential for the synthesis and design of safer nanomaterials but will also help to discover potential nanomedical applications of these materials. Several biomedical applications based on the different signaling pathways induced by nanomaterials are already proposed and will certainly gain a great deal of attraction in the near future.

Assessing carbon-encapsulated iron nanoparticles cytotoxicity in Lewis lung carcinoma cells

Carbon-encapsulated iron nanoparticles (CEINs) have been considered as attractive candidates for several biomedical applications. In the present study, we synthesized CEINs (the mean diameter 40-80 nm) using a carbon arc route, and the as-synthesized CEINs were characterized (scanning and transmission electron microscopy, dynamic light scattering, turbidimetry, Zeta potential) and further tested as raw and purified nanomaterials containing the carbon surface modified with acidic groups. For cytotoxicity evaluation, we applied a battery of different methods (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, lactate dehydrogenase, calcein AM/propidium iodide, annexin V/propidium iodide, JC-1, cell cycle assay, Zeta potential, TEM and inductively coupled plasma mass spectrometry) to address the strategic cytotoxic endpoints of Lewis lung carcinoma cells due to CEIN (0.0001-100 µg ml(-1) ) exposures in vitro. Our studies evidence that incubation of Lewis lung carcinoma cells with CEINs is accompanied in substantial changes of zeta potential in cells and these effects may result in different internalization profiles. The results show that CEINs increased the mitochondrial and cell membrane cytotoxicity; however, the raw CEIN material (Fe@C/Fe) produced higher toxicities than the rest of the CEINs studied to data. The study showed that non-modified CEINs (Fe@C/Fe and Fe@C) elevated some pro-apoptotic events to a greater extent compared to that of the surface-modified CEINs (Fe@C-COOH and Fe@C-(CH2 )2 COOH). They also diminished the mitochondrial membrane potentials. In contrast to non-modified CEINs, the surface-functionalized nanoparticles caused the concentration- and time-dependent arrest of the S phase in cells. Taken all together, our results shed new light on the rational design of CEINs, as their geometry, hydrodynamic and, in particular, surface characteristics are important features in selecting CEINs as future nanomaterials for nanomedicine applications.

Rapid formation of plasma protein corona critically affects nanoparticle pathophysiology

In biological fluids, proteins bind to the surface of nanoparticles to form a coating known as the protein corona, which can critically affect the interaction of the nanoparticles with living systems. As physiological systems are highly dynamic, it is important to obtain a time-resolved knowledge of protein-corona formation, development and biological relevancy. Here we show that label-free snapshot proteomics can be used to obtain quantitative time-resolved profiles of human plasma coronas formed on silica and polystyrene nanoparticles of various size and surface functionalization. Complex time- and nanoparticle-specific coronas, which comprise almost 300 different proteins, were found to form rapidly (<0.5 minutes) and, over time, to change significantly in terms of the amount of bound protein, but not in composition. Rapid corona formation is found to affect haemolysis, thrombocyte activation, nanoparticle uptake and endothelial cell death at an early exposure time.

The role of surface chemistry on the toxicity of ag nanoparticles

The role of surface chemistry on the toxicity of Ag nanoparticles is investigated using Saccharomyces cerevisiae yeast as a platform for evaluation. Combining the shape-controlled synthesis of Ag nanoparticles with a comprehensive characterization of their physicochemical properties, an understanding is formed of the correlation between the physicochemical parameters of nanoparticles and the inhibition growth of yeast cells upon the introduction of nanoparticles into the cell culture system. Capping agents, surface facets, and sample stability--the three experimental parameters that are inherent from the wet--chemical synthesis of Ag nanoparticles-have a strong impact on toxicity evaluation. Hence, it is important to characterize surface properties of Ag nanoparticles in the nature of biological media and to understand the role that surface chemistry may interplay to correlate the physicochemical properties of nanoparticles with their biological response upon exposure. This work demonstrates the great importance of surface chemistry in designing experiments for reliable toxicity evaluation and in mitigating the toxicity of Ag nanoparticles for their safe use in future commercialization.

The role of surface chemistry in determining in vivo biodistribution and toxicity of CdSe/ZnS core-shell quantum dots

To examine the effect of surface chemistry and surface charge on in vivo biodistribution and toxicity of CdSe/ZnS core-shell quantum dots (QDs), QDs with positive, negative, or PEG coating are used in this study for in vivo evaluation in a mouse model. The results suggest that QDs coated with cationic polydiallyldimethylammonium chloride (PDDA) preferentially deposit in the lung other than in the liver, while the negative and PEGylated QDs render abundant accumulation in the liver. At higher doses positive QDs with PDDA coating show severe acute toxicity due to pulmonary embolism. Independent of their surface coatings, all QDs cause injuries in specific tissues like liver, spleen, lung, and kidney, after acute and long-term exposure, and the degree of injuries is dominated by their surface properties. For the positively charged QDs, the acute phase toxicity is primarily contributed by the coating material PDDA, while coating on QDs may amplify both in vitro and in vivo toxicity of PDDA. PEGylated QDs display the slightest chronic injuries in the long-term toxicity examination in comparison to positive or negative ones.

Therapeutic polymers for dental adhesives: loading resins with bio-active components

OBJECTIVES

Many recent adhesives on the market exhibit reasonable clinical performance. Future innovations in adhesive materials should therefore seek out novel properties rather than simply modifying existing technologies. It is proposed that adhesive materials that are "bio-active" could contribute to better prognosis of restorative treatments.

METHODS

This review examines the recent approaches used to achieve therapeutic polymers for dental adhesives by incorporating bio-active components. A strategy to maintain adhesive restorations is the focus of this paper.

RESULTS

Major trials on therapeutic dental adhesives have looked at adding antibacterial activities or remineralization effects. Applications of antibacterial resin monomers based on quaternary ammonium compounds have received much research attention, and the loading of nano-sized bioactive particles or multiple ion-releasing glass fillers have been perceived as advantageous since they are not expected to influence the mechanical properties of the carrier polymer.

SIGNIFICANCE

The therapeutic polymer approaches described here have the potential to provide clinical benefits. However, not many technological applications in this category have been successfully commercialized. Clinical evidence as well as further advancement of these technologies can be a driving force to make these new types of materials clinically available.

Cytotoxicity of surface-functionalized silicon and germanium nanoparticles: the dominant role of surface charges

Although it is frequently hypothesized that surface (like surface charge) and physical characteristics (like particle size) play important roles in cellular interactions of nanoparticles (NPs), a systematic study probing this issue is missing. Hence, a comparative cytotoxicity study, quantifying nine different cellular endpoints, was performed with a broad series of monodisperse, well characterized silicon (Si) and germanium (Ge) NPs with various surface functionalizations. Human colonic adenocarcinoma Caco-2 and rat alveolar macrophage NR8383 cells were used to clarify the toxicity of this series of NPs. The surface coatings on the NPs appeared to dominate the cytotoxicity: the cationic NPs exhibited cytotoxicity, whereas the carboxylic acid-terminated and hydrophilic PEG- or dextran-terminated NPs did not. Within the cationic Si NPs, smaller Si NPs were more toxic than bigger ones. Manganese-doped (1% Mn) Si NPs did not show any added toxicity, which favors their further development for bioimaging. Iron-doped (1% Fe) Si NPs showed some added toxicity, which may be due to the leaching of Fe(3+) ions from the core. A silica coating seemed to impart toxicity, in line with the reported toxicity of silica. Intracellular mitochondria seem to be the target for the toxic NPs since a dose-, surface charge- and size-dependent imbalance of the mitochondrial membrane potential was observed. Such an imbalance led to a series of other cellular events for cationic NPs, like decreased mitochondrial membrane potential (ΔΨm) and ATP production, induction of ROS generation, increased cytoplasmic Ca(2+) content, production of TNF-α and enhanced caspase-3 activity. Taken together, the results explain the toxicity of Si NPs/Ge NPs largely by their surface characteristics, provide insight into the mode of action underlying the observed cytotoxicity, and give directions on synthesizing biocompatible Si and Ge NPs, as this is crucial for bioimaging and other applications in for example the field of medicine.

Gold nanoparticles as a vaccine platform: influence of size and shape on immunological responses in vitro and in vivo

This paper demonstrates how the shape and size of gold nanoparticles (AuNPs) affect immunological responses in vivo and in vitro for the production of antibodies for West Nile virus (WNV). We prepared spherical (20 and 40 nm in diameter), rod (40 × 10 nm), and cubic (40 × 40 × 40 nm) AuNPs as adjuvants and coated them with WNV envelope (E) protein. We measured anti-WNVE antibodies after inoculation of these WNVE-coated AuNPs (AuNP-Es) into mice. The 40 nm spherical AuNP-Es (Sphere40-Es) induced the highest level of WNVE-specific antibodies, while rod AuNP-Es (Rod-Es) induced only 50% of that of Sphere40-E. To examine the mechanisms of the shape-dependent WNVE antibody production, we next measured the efficiency of cellular uptake of AuNP-Es into RAW264.7 macrophage cells and bone-marrow-derived dendritic cells (BMDCs) and the subsequent cytokine secretion from BMDCs. The uptake of Rod-Es into the cells proceeded more efficiently than those of Sphere-Es or cubic WNVE-coated AuNPs (Cube-Es), suggesting that antibody production was not dependent on the uptake efficiency of the different AuNP-Es. Cytokine production from BMDCs treated with the AuNP-Es revealed that only Rod-E-treated cells produced significant levels of interleukin-1β (IL-1β) and interleukin-18 (IL-18), indicating that Rod-Es activated inflammasome-dependent cytokine secretion. Meanwhile, Sphere40-Es and Cube-Es both significantly induced inflammatory cytokine production, including tumor necrosis factor-α (TNF-α), IL-6, IL-12, and granulocyte macrophage colony-stimulating factor (GM-CSF). These results suggested that AuNPs are effective vaccine adjuvants and enhance the immune response via different cytokine pathways depending on their sizes and shapes.

Interfacing engineered nanoparticles with biological systems: anticipating adverse nano-bio interactions

The innovative use of engineered nanomaterials in medicine, be it in therapy or diagnosis, is growing dramatically. This is motivated by the current extraordinary control over the synthesis of complex nanomaterials with a variety of biological functions (e.g. contrast agents, drug-delivery systems, transducers, amplifiers, etc.). Engineered nanomaterials are found in the bio-context with a variety of applications in fields such as sensing, imaging, therapy or diagnosis. As the degree of control to fabricate customized novel and/or enhanced nanomaterials evolves, often new applications, devices with enhanced performance or unprecedented sensing limits can be achieved. Of course, interfacing any novel material with biological systems has to be critically analyzed as many undesirable adverse effects can be triggered (e.g. toxicity, allergy, genotoxicity, etc.) and/or the performance of the nanomaterial can be compromised due to the unexpected phenomena in physiological environments (e.g. corrosion, aggregation, unspecific absorption of biomolecules, etc.). Despite the need for standard protocols for assessing the toxicity and bio-performance of each new functional nanomaterial, these are still scarce or currently under development. Nonetheless, nanotoxicology and relating adverse effects to the physico-chemical properties of nanomaterials are emerging areas of the utmost importance which have to be continuously revisited as any new material emerges. This review highlights recent progress concerning the interaction of nanomaterials with biological systems and following adverse effects.

Nano-bio effects: interaction of nanomaterials with cells

With the advancements in nanotechnology, studies on the synthesis, modification, application, and toxicology evaluation of nanomaterials are gaining increased attention. In particular, the applications of nanomaterials in biological systems are attracting considerable interest because of their unique, tunable, and versatile physicochemical properties. Artificially engineered nanomaterials can be well controlled for appropriate usage, and the tuned physicochemical properties directly influence the interactions between nanomaterials and cells. This review summarizes recently synthesized major nanomaterials that have potential biomedical applications. Focus is given on the interactions, including cellular uptake, intracellular trafficking, and toxic response, while changing the physicochemical properties of versatile materials. The importance of physicochemical properties such as the size, shape, and surface modifications of the nanomaterials in their biological effects is also highlighted in detail. The challenges of recent studies and future prospects are presented as well. This review benefits relatively new researchers in this area and gives them a systematic overview of nano-bio interaction, hopefully for further experimental design.

Polymer-coated nanoparticles interacting with proteins and cells: focusing on the sign of the net charge

To study charge-dependent interactions of nanoparticles (NPs) with biological media and NP uptake by cells, colloidal gold nanoparticles were modified with amphiphilic polymers to obtain NPs with identical physical properties except for the sign of the charge (negative/positive). This strategy enabled us to solely assess the influence of charge on the interactions of the NPs with proteins and cells, without interference by other effects such as different size and colloidal stability. Our study shows that the number of adsorbed human serum albumin molecules per NP was not influenced by their surface charge. Positively charged NPs were incorporated by cells to a larger extent than negatively charged ones, both in serum-free and serum-containing media. Consequently, with and without protein corona (i.e., in serum-free medium) present, NP internalization depends on the sign of charge. The uptake rate of NPs by cells was higher for positively than for negatively charged NPs. Furthermore, cytotoxicity assays revealed a higher cytotoxicity for positively charged NPs, associated with their enhanced uptake.

Discriminating the states of matter in metallic nanoparticle transformations: what are we missing?

A limiting factor in assessing the risk of current and emerging nanomaterials in biological and environmental systems is the ability to accurately detect and characterize their size, shape, and composition in broad product distributions and complex media. Asymmetric flow field-flow fractionation (A4F) is capable of separation without stationary phase interactions or large applied forces. Here, we demonstrate unprecedented A4F fractionation of metallic nanoclusters with core diameters near 1 nm and with high resolution. The isolated nanocluster populations were characterized online with UV-vis absorption and inductively coupled plasma mass spectrometry (ICP-MS). We apply our methodology to a model system, poly(N-vinyl-2-pyrrolidone)-protected silver nanoparticles with an excess of tripeptide-glutathione (GSH). The temporal evolution of the initial silver nanoparticle distribution in the presence of excess GSH results in the appearance and persistence of a continuum of matter states (e.g., Ag(+) nanoclusters and nanoparticles) that could be fractionated with A4F, characterized by their optical signatures and diffusion coefficients, and quantified with ICP-MS. The results suggest that our methodology is generally applicable to metallic systems when appropriate online detection is coupled to the A4F. Because we extend the capability of the coupled A4F system to reliably detect, characterize, and quantify metallic populations in the sub-5 nm regime, the opportunity exists to survey the formation and transformation products of nanomaterials in more relevant biological and environmental systems. Thus, individually assessing the risks associated with specific ion, nanocluster, and nanoparticle populations is achievable, where such populations may have previously been misrepresented.

Mapping the dawn of nanoecotoxicological research

Some researchers consider nanotechnology the next industrial revolution, and consumer products and a variety of industries increasingly use synthetic nanoparticles. In this Account, we review the initial accomplishments of nanoecotoxicology, a discipline that is just a decade old. This new subdiscipline of ecotoxicology faces two important and challenging problems: the analysis of the safety of nanotechnologies in the natural environment and the promotion of sustainable development while mitigating the potential pitfalls of innovative nanotechnologies. In this Account, we provide a snapshot of the publicly available scientific information regarding the ecotoxicity of engineered nanoparticles. We pay special attention to information relevant to aquatic freshwater species commonly used for risk assessment and regulation. Just as the development of ecotoxicology has lagged behind that of toxicology, nanoecotoxicological research has developed much more slowly than nanotoxicology. Although the first nanotoxicolology papers were published in 1990s, the first nanoecotoxicology papers came out in 2006. A meta-analysis of scientific publications covering different environmental impacts of nanomaterials showed that the importance of research into the environmental impact of nanotechnology has gradually increased since 2005. Now the most frequently cited papers in the environmental disciplines are often those that focus on synthetic nanoparticles. The first nanoecotoxicology studies focused on adverse effects of nanoparticles on fish, algae and daphnids, which are ecotoxicological model organisms for classification and labeling of chemicals (these model organisms are also used in the EU chemical safety policy adopted in 2007: Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)). Based on our experience, we propose a multitrophic battery of nanoecotoxicological testing that includes particle-feeding and a priori particle-"proof" prokaryotic and eukaryotic organisms at different food-chain levels. Using this battery of selected test organisms, we demonstrated that TiO₂ nanoparticles were toxic to algae and that ZnO and CuO nanoparticles were toxic to several aquatic invertebrate test species. Thus, one single biotest cannot predict the ecotoxicological effects of chemicals/nanoparticles, and researchers should use several tests instead. Moreover, produced nanoparticles usually vary in features such as size, shape, and coating; therefore, a single nanoparticle species may actually include many entities with different physicochemical properties. An ecotoxicity analysis of all these variants would require a huge number of laboratory tests. To address these issues, high throughput bioassays and computational (QSAR) models that serve as powerful alternatives to conventional (eco)toxicity testing must be implemented to handle both the diversity of nanomaterials and the complexity of ecosystems.

On the role of surface composition and curvature on biointerface formation and colloidal stability of nanoparticles in a protein-rich model system

The need for a better understanding of nanoparticle-protein interactions and the mechanisms governing the resulting colloidal stability has been emphasised in recent years. In the present contribution, the short and long term colloidal stability of silica nanoparticles (SNPs) and silica-poly(ethylene glycol) nanohybrids (Sil-PEG) have been scrutinised in a protein model system. Well-defined silica nanoparticles are rapidly covered by bovine serum albumin (BSA) and form small clusters after 20min while large agglomerates are detected after 10h depending on both particle size and nanoparticle-protein ratio. Oppositely, Sil-PEG hybrids present suppressive protein adsorption and enhanced short and long term colloidal stability in protein solution. No critical agglomeration was found for either system in the absence of protein, proving that instability found for SNPs must arise as a consequence of protein adsorption and not to high ionic environment. Analysis of the small angle X-ray scattering (SAXS) structure factor indicates a short-range attractive potential between particles in the silica-BSA system, which is in good agreement with a protein bridging agglomeration mechanism. The results presented here point out the importance of the nanoparticle surface properties on the ability to adsorb proteins and how the induced or depressed adsorption may potentially drive the resulting colloidal stability.

Bridge over troubled waters: understanding the synthetic and biological identities of engineered nanomaterials

Engineered nanomaterials offer exciting opportunities for 'smart' drug delivery and in vivo imaging of disease processes, as well as in regenerative medicine. The ability to manipulate matter at the nanoscale enables many new properties that are both desirable and exploitable, but the same properties could also give rise to unexpected toxicities that may adversely affect human health. Understanding the physicochemical properties that drive toxicological outcomes is a formidable challenge as it is not trivial to separate and, hence, to pinpoint individual material characteristics of nanomaterials. In addition, nanomaterials that interact with biological systems are likely to acquire a surface corona of biomolecules that may dictate their biological behavior. Indeed, we propose that it is the combination of material-intrinsic properties (the 'synthetic identity') and context-dependent properties determined, in part, by the bio-corona of a given biological compartment (the 'biological identity') that will determine the interactions of engineered nanomaterials with cells and tissues and subsequent outcomes. The delineation of these entwined 'identities' of engineered nanomaterials constitutes the bridge between nanotoxicological research and nanomedicine.

Gold nanoprisms as optoacoustic signal nanoamplifiers for in vivo bioimaging of gastrointestinal cancers

Early detection of cancer greatly increases the chances of a simpler and more effective treatment. Traditional imaging techniques are often limited by shallow penetration, low sensitivity, low specificity, poor spatial resolution or the use of ionizing radiation. Hybrid modalities, like optoacoustic imaging, an emerging molecular imaging modality, contribute to improving most of these limitations. However, this imaging method is hindered by relatively low signal contrast. Here, gold nanoprisms (AuNPrs) are used as signal amplifiers in multispectral optoacoustic tomography (MSOT) to visualize gastrointestinal cancer. PEGylated AuNPrs are successfully internalized by HT-29 gastrointestinal cancer cells in vitro. Moreover, the particles show good biocompatibility and exhibit a surface plasmon band centered at 830 nm, a suitable wavelength for optoacoustic imaging purposes. These findings extend well to an in vivo setting, in which mice are injected with PEGylated AuNPrs in order to visualize tumor angiogenesis in gastrointestinal cancer cells. Overall, both our in vitro and in vivo results show that PEGylated AuNPrs have the capacity to penetrate tumors and provide a high-resolution signal amplifier for optoacoustic imaging. The combination of PEGylated AuNPrs and MSOT represents a significant advance for the in vivo imaging of cancers.

Effect of cerium oxide nanoparticles on intestinal serotonin in zebrafish

Cerium oxide nanoparticles or nanoceria are emerging as a new and promising class of nanoparticle technology for biomedical applications. The safe implementation of these particles in clinical applications requires evaluation of their redox properties and reactivity that might cause neurotoxic effects by interacting with redox components of the physiological environment. We report in vitro and in vivo studies to evaluate the impact of nanoceria exposure on serotonin (5-HT), an important neurotransmitter that plays a critical role in various physiological processes including motility and secretion in the digestive system. In vitro studies of 5-HT in the presence of nanoceria using spectroscopic, electrochemical and surface characterization methods demonstrate that nanoceria interacts with 5-HT and forms a surface adsorbed 5-HT-nanoceria complex. Further in vivo studies in live zebrafish embryos indicate depletion of the 5-HT level in the intestine for exposure periods longer than three days. Intestinal 5-HT was assessed quantitatively in live embryos using implantable carbon fiber microelectrodes and the results were compared to immunohistochemistry of the dissected intestine. 20 and 50 ppm nanoparticle exposure decreased the 5-HT level to 20.5 (±1.3) and 5.3 (±1.5) nM respectively as compared to 30.8 (±3.4) nM for unexposed control embryos. The results suggest that internalized nanoceria particles can concentrate 5-HT at the nanoparticle accumulation site depleting it from the surrounding tissue. This finding might have long term implications in the neurophysiology and functional development of organisms exposed to these particles through intended or unintended exposure.