Halloysite clay nanotubes for controlled release of protective agents

Effect of Hydrophobic Chains on Solubilization of Hydrocarbon and Fluorocarbon Surfactant Mixtures in Aqueous Solution

We investigated the solubilization behavior of the hydrocarbon surfactant lithium dodecyl sulfate (LiDS) and the fluorocarbon surfactant lithium 1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluoro-1-octanesulfonate (LiFOS) in an aqueous solution to determine the controlled release mechanism of solubilizate. The LiDS system solubilized Sudan III, a hydrocarbon compound, whereas the LiFOS system did not, because of the immiscibility of the hydrocarbon and fluorocarbon compounds. The solubilization ability of the LiDS and LiFOS mixtures gradually decreased with increasing LiFOS bulk composition because the micelles mainly composed of LiDS transformed into micelles mainly composed of LiFOS. Furthermore, Sudan III solubilized in the aqueous LiDS was deposited when an aqueous LiFOS was added. The difference in the solubilization behavior between LiDS and LiFOS enabled the controlled release of the solubilizate.

the Material Properties of Chitosan-Halloysite Hydrogel Composites

Chitosan-based hydrogels are being widely used in biomedical applications due to their eco-friendly, biodegradable, and biocompatible properties, and their ability to mimic the extracellular matrix of many tissues. However, the application of chitosan hydrogels has been limited due to their inherent mechanical weakness. Halloysite nanotubes (HNTs) are naturally occurring aluminosilicate clay minerals and are widely used as a bulk filler to improve the performance characteristics of many polymeric materials. HNTs have also been shown to be a viable nanocontainer able to provide the sustained release of antibiotics, chemicals, and growth factors. This study's objective was to develop a stable drug delivery chitosan/HNT nanocomposite hydrogel that is biocompatible, biodegradable, and provides sustained drug release. In this study, chitosan/HNTs hydrogels containing undoped or gentamicin-doped HNTs were combined in different wt./wt. ratios and cross-linked with tripolyphosphate. The effects of chitosan and HNTs concentration and combination ratios on the hydrogel surface morphology, degradability, and mechanical properties, as well as its drug release capability, were analyzed. The results clearly showed that the addition of HNTs improved chitosan mechanical properties, but only within a narrow range. The nanocomposite hydrogels provided a sustained pattern of drug release and inhibited bacterial growth, and the live/dead assay showed excellent cytocompatibility.

Prolonged Insecticidal Activity of Clove oil-Loaded Halloysite Nanotubes on Plodia interpunctella Infestation and Application in Industrial-Scale Food Packaging

Previous study reported the development of insect-proof halloysite nanotubes (HNTs) and food packaging; however, the duration of their insecticidal properties remains unclear. Here, we aimed to (1) demonstrate the duration of repellency of clove bud oil (CO) encapsulated by HNTs for more than 30 days, and (2) manufacture insect-proof film containing HNTs for commercial use. Also, the release behavior of CO from insect-resistant HNTs was evaluated and HNTs were applied to food packaging composed of polypropylene and low-density polyethylene films to prevent Plodia interpunctella (Hübner) (Lepidoptera: Pyralidae) larva infestation. CO, a natural insecticide, was embedded with HNTs and polyethyleneimine (PEI) via vacuum pulling process to cause a slow and gradual release of CO. The sustained release profile of CO from CO-containing HNTs with a PEI coating [(HNTs/CO/layer-by-layer (LBL)] was verified by gas chromatography analysis. The repellent activity of HNTs/CO/LBL was observed for up to 46 days, whereas CO film and HNTs/CO film exhibited no insecticidal activities during the test period. After 30-day exposure, the HNTs/CO/LBL film exhibited a 7-day extension in the penetration test. To evaluate the insecticidal properties of the insect-proof film (HNTs/CO/LBL scale-up film) manufactured in an industrial facility, the inhibitory effects of HNTs/CO/LBL scale-up film on insect infestation was elucidated in both the segregation and combination tests. As a result, HNTs/CO/LBL alone or gravure-printed film treated with HNTs/CO/LBL were capable of protecting food from insect infestation. PRACTICAL APPLICATION: Halloysite nanotubes containing natural insect repellent were applied to industrial production of food packaging. Commercial cornflake cereal packaging using insect-resistant film successfully inhibited pest infestation. Insect-proof film produced at an industrial facility can be utilized to protect processed food from insect infestation.

Preparation of bioactive hydroxyapatite@halloysite and its effect on MC3T3-E1 osteogenic differentiation of chitosan film

Halloysite nanotubes (HNTs) are widely used in biomedical field due to their special tubular structure and high reinforcing ability, while hydroxyapatite (HAP) is generally used in tissue engineering owing to its excellent biocompatibility and biological activity. In this work, hydroxyapatite@halloysite nanotubes(HAP@HNTs) hybrid was synthesized via a facial hydrothermal reaction process. The morphology, particle size, specific surface area, and chemical composition of the hybrid were thoroughly characterized by different techniques. Rod-like HAP nanoparticles can be anchored on the outer surface of the clay tubes, which lead to a maximum increase of 4.7 m²/g in the specific surface area of HAP@HNTs over that of HNTs. HAP nanoparticles have little effect on the pores of HNTs, but diffraction peak strength of HNTs is covered by the HAP crystals. HAP@HNTs exhibit improved cytocompatibility and possess osteogenic differentiation ability towards MC3T3-E1 preosteoblasts. Chitosan/HAP@HNTs composite films were then prepared by doping of HAP@HNTs into chitosan by solution mixing. HAP@HNTs can serve as a functional phase which enhances mechanical properties of chitosan films and osteogenic differentiation of MC3T3-E1 cells. This work provides a facial synthesis routine of bioactive HAP@HNTs, which combines the osteogenic activity of HAP and the good mechanical properties of HNTs. HAP@HNTs can be used a novel bone regeneration biomaterial as local delivery systems with improved osteoinductive properties.

Superhydrophobic Polyurethane Foam Coated with Polysiloxane-Modified Clay Nanotubes for Efficient and Recyclable Oil Absorption

Superhydrophobic polyurethane foam (PUF) is prepared by surface coating of halloysite nanotubes. The nanotubes were first modified by surface grafting with hexadecyltrimethoxysilane, followed by assembly on the PUF by dip coating. This treatment makes the water contact angle of the modified PUF higher than 150°. The modified foam has a highly selective absorption of oils and organic solvents. The absorption ratios of the modified PUF for chloroform and dichloroethane reached 104 and 74, respectively. Such superhydrophobic foam can maintain the oil absorption performance even after 10 absorption-squeezing cycles, demonstrating good recyclability. The modified foam can pick up oil or organic solvent continuously and quickly from water's surface. This hydrophobic nanotube coating also enhances the flame retardancy of the PUF, and the modified foam will extinguish itself maintaining its integrity. The preparation method for hydrophobic and flame-retardant PUF by coating with natural clay nanotubes is a simple process and promises scalable applications in oil-water separation.

Interfacial Self-Assembly in Halloysite Nanotube Composites

A self-assembly of clay nanotubes in functional arrays for the production of organized organic/inorganic heterostructures is described. These 50-nm-diameter natural alumosilicate nanotubes are biocompatible. Halloysite allows for 10-20 wt % chemical/drug loading into the inner lumen, and it gives an extended release for days and months (anticorrosion, self-healing, flame-retardant, antifouling, and antibacterial composites). The structured surfaces of the oriented nanotube micropatterns enhance interactions with biological cells, improving their capture and inducing differentiation in stem cells. An encapsulation of the cells with halloysite enables control of their growth and proliferation. This approach was also developed for spill petroleum bioremediation as a synergistic process with Pickering oil emulsification. We produced 2-5-nm-diameter particles (Au, Ag, Pt, Co, Ru, Cu-Ni, Fe₃O₄, ZrO₂, and CdS) selectively inside or outside the aluminosilicate clay nanotubes. The catalytic hydrogenation of benzene and phenol, hydrogen production, impacts of the metal core-shell architecture, the metal particle size, and the seeding density were optimized for high-efficiency processes, exceeding the competitive industrial formulations. These core-shell mesocatalysts are based on a safe and cheap natural clay nanomaterial and may be scaled up for industrial applications.

Hybrids of Polymeric Capsules, Lipids, and Nanoparticles: Thermodynamics and Temperature Rise at the Nanoscale and Emerging Applications

The importance of thermodynamics does not need to be emphasized. Indeed, elevated temperature processes govern not only industrial scale production but also self-assembly, chemical reaction, interaction between molecules, etc. Not surprisingly, biological processes typically take place at a specific temperature. Here, we look at possibilities to raise the localized temperature by a laser around noble-metal nanoparticles incorporated into shells of layer-by-layer polyelectrolyte microcapsules-freely suspended delivery vehicles in an aqueous solution, developed in the Department of Interfaces, Max Planck Institute of Colloids and Interfaces, headed by Helmuth Möhwald. Understanding the mechanisms of localized temperature rise is essential, that is why we analyze the influence of incident intensity, nanoparticle size, their distribution and aggregation state, as well as thermodynamics at the nanoscale. This leads us to scrutinize "global" (used for thermal encapsulation) versus "local" (used for release of encapsulated materials) temperature rise. Similar analysis is extended to planar polymeric coatings, the lipid membrane system of vesicles and cells, on which nanoparticles are adsorbed. Insights are provided into the mechanisms of physicochemical and biological effects, the nature of which has always been profoundly, interactively, and engagingly discussed in the Department of Interfaces. This analysis is combined with recent developments providing outlook and highlighting a broad range of emerging applications.

Nanocontainer-Based Active Systems: From Self-Healing Coatings to Thermal Energy Storage

We highlight the development of nanocontainer-based active materials started in 2006 at the Max Planck Institute of Colloids and Interfaces under the supervision of Prof. Helmuth Möhwald. The active materials encapsulated in the nanocontainers with controlled shell permeability have been first applied for self-healing coatings with controlled release of the corrosion inhibitor. The nanocontainers have been added to the paint formulation matrix at 5-10 wt % concentration, which resulted in attaining a coating-autonomous self-healing ability. This research idea has attracted the attention of many scientists around the world (>1500 publications during the last 10 years) and has already been transferred to the commercialization level. The current trend in nanocontainer-based active systems is devoted to the multifunctionality of the capsules which can combine self-healing, antibacterial, thermal, and other functionalities into one host matrix. This article summarizes the previous research done in the area of nanocontainer-based active materials together with future perspectives of capsule-based materials with antifouling or thermoregulating activity.

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

Based on the unique ability of defibrillated sepiolite (SEP) to form stable and homogeneous colloidal dispersions of diverse types of nanoparticles in aqueous media under ultrasonication, multicomponent conductive nanoarchitectured materials integrating halloysite nanotubes (HNTs), graphene nanoplatelets (GNPs) and chitosan (CHI) have been developed. The resulting nanohybrid suspensions could be easily formed into films or foams, where each individual component plays a critical role in the biocomposite: HNTs act as nanocontainers for bioactive species, GNPs provide electrical conductivity (enhanced by doping with MWCNTs) and, the CHI polymer matrix introduces mechanical and membrane properties that are of key significance for the development of electrochemical devices. The resulting characteristics allow for a possible application of these active elements as integrated multicomponent materials for advanced electrochemical devices such as biosensors and enzymatic biofuel cells. This strategy can be regarded as an "a la carte" menu, where the selection of the nanocomponents exhibiting different properties will determine a functional set of predetermined utility with SEP maintaining stable colloidal dispersions of different nanoparticles and polymers in water.

Functionalized Halloysite Nanotubes⁻Silica Hybrid for Enhanced Curing and Mechanical Properties of Elastomers

Vulcanization and reinforcement are critical factors in governing the ultimate practical applications of elastomer composites. Here we achieved a simultaneous improvement of curing and mechanical properties of elastomer composites by the incorporation of a functionalized halloysite nanotubes–silica hybrid (HS-s-M). Typically, HS-s-M was synthesized by 2-mercapto benzothiazole (M) immobilized on the surface of halloysite nanotubes–silica hybrid (HS). It was found that the HS-s-M uniformly dispersed in the styrene-butadiene rubber (SBR) matrix, offering more opportunity for M molecules to communicate with rubber. In addition, the physical loss of accelerator M from migration and volatilization was efficiently suspended. Therefore, SBR/HS-s-M composites showed a lower curing activation energy and a higher crosslinking density than SBR/HS composites. Moreover, a stronger interfacial interaction between HS-s-M and SBR was formed by the cross-linking reaction, giving a positive contribution to the eventual mechanical properties. The possible vulcanization and reinforcement mechanisms of SBR/HS-s-M composites were also analyzed in detail.

Clay Nanotubes Aligned with Shear Forces for Mesenchymal Stem Cell Patterning

Aligned halloysite nanotubes on solid substrates are fabricated by a shearing method with brush assistance. These clay nanotubes are aligned by shear force in strip-like patterns accomplished with drying ordering at elevated temperatures. The nanotubes' orientation is governed by "coffee-ring" formation mechanisms depending on the dispersion concentration, nanotube charge, and speed of thermos-evaporation. Polarized light irradiated through the patterns demonstrates birefringence and confirms the orientation. Scanning electron microscopy and atomic force microscopy show that the nanotubes are aligned along the direction of the wetting lines above 4 wt%, while they are not oriented at lower concentrations. Halloysite concentration, drying temperature, and type of brush fibers affect the pattern ordering. The aligned halloysite systems on glass, tissue culture plates, and polymer films, provide a promising platform for biocell guiding. Human foreskin fibroblasts proliferated well on the aligned clay patterns and the cell orientation agrees with the nanotube direction. Human bone mesenchymal stem cells (HBMSCs) are also cultured on the organized halloysite coating. The clay patterns support HBMSC proliferation with alignment, and such nanostructured substrates promote osteogenesis differentiation without growth factors. This facile method for preparing aligned halloysite patterns on solid substrates is very promising for surface modification in biotissue engineering.

Investigations on the Properties and Performance of Mixed-Matrix Polyethersulfone Membranes Modified with Halloysite Nanotubes

Ultrafiltration (UF) polyethersulfone (PES) membranes were prepared by wet phase inversion method. Commercial halloysite nanotubes (HNTs) in the amount of 0.5–4 wt % vs PES (15 wt %) were introduced into the casting solution containing the polymer and N,N-dimethylformamide as a solvent. The morphology, physicochemical properties and performance of the membranes were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), zeta potential, porosity and contact angle analyses, as well as permeability measurements. Moreover, the antifouling properties of the membranes were evaluated during UF of a model solution of bovine serum albumin (BSA). The research revealed a positive influence of modification with HNTs on hydrophilicity, water permeability and antifouling properties of the PES membranes. The most significant improvement of permeability was obtained in case of the membrane containing 2 wt % of HNTs, whereas the highest fouling resistance was observed for 0.5 wt % HNTs content. It was found that a good dispersion of HNTs can be obtained only at loadings below 2 wt %. Based on the results a relation between severity of membrane fouling and surface roughness was proved. Moreover, an increase of the roughness of the modified membranes was found to be accompanied by an increase of isoelectric point values.

Why does vacuum drive to the loading of halloysite nanotubes? The key role of water confinement

The filling of halloysite nanotubes with active compounds solubilized in aqueous solvent was investigated theoretically and experimentally. Based on Knudsen thermogravimetric data, we demonstrated the water confinement within the cavity of halloysite. This process is crucial to properly describe the driving mechanism of halloysite loading. In addition, Knudsen thermogravimetric experiments were conducted on kaolinite nanoplates as well as on halloysite nanotubes modified with an anionic surfactant (sodium dodecanoate) in order to explore the influence of both the nanoparticle morphology and the hydrophobic/hydrophilic character of the lumen on the confinement phenomenon. The analysis of the desorption isotherms allowed us to determine the water adsorption properties of the investigated nanoclays. The pore sizes of the nanotubes' lumen was determined by combining the vapor pressure of the confined water with the nanoparticles wettability, which was studied through contact angle measurements. The thermodynamic description of the water confinement inside the lumen was correlated to the influence of the vacuum pumping in the experimental loading of halloysite. Metoprolol tartrate, salicylic acid and malonic acid were selected as anionic guest molecules for the experimental filling of the positively charged halloysite lumen. According to the filling mechanism induced by the water confinement, the vacuum operation and the reduced pressure enhanced the loading of halloysite nanotubes for all the investigated bioactive compounds. This work represents a further and crucial step for the development of halloysite based nanocarriers being that the filling mechanism of the nanotube's cavity from aqueous dispersions was described according to the water confinement process.

Mesoporous halloysite nanotubes modified by CuFe2O4 spinel ferrite nanoparticles and study of its application as a novel and efficient heterogeneous catalyst in the synthesis of pyrazolopyridine derivatives

In this study, mesoporous halloysite nanotubes (HNTs) were modified by CuFe₂O₄ nanoparticles for the first time. The morphology, porosity and chemistry of the CuFe₂O₄@HNTs nanocomposite were fully characterized by Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM) image, transmission electron microscope (TEM) images, energy-dispersive X-ray (EDX), X-ray diffraction (XRD) pattern, Brunauer-Emmett-Teller (BET) adsorption-desorption isotherm, thermogravimetric (TG) and vibrating sample magnetometer (VSM) curve analyses. The results confirmed that CuFe₂O₄ with tetragonal structure, uniform distribution, and less agglomeration was located at HNTs. CuFe₂O₄@HNTs nanocomposite special features were high thermal stability, crystalline structure, and respectable magnetic property. SEM and TEM results showed the nanotube structure and confirmed the stability of basic tube in the synthetic process. Also, inner diameters of tubes were increased in calcination temperature at 500 °C. A good magnetic property of CuFe₂O₄@HNTs led to use it as a heterogeneous catalyst in the synthesis of pyrazolopyridine derivatives. High efficiency, green media, mild reaction conditions and easily recovery of the nanocatalyst are some advantages of this protocol.

Physicochemical and biological properties of novel chlorhexidine-loaded nanotube-modified dentin adhesive

A commercially available three-step (etch-and-rinse) adhesive was modified by adding chlorhexidine (CHX)-loaded nanotubes (Halloysite®, HNT) at two concentrations (CHX10% and CHX20%). The experimental groups were: SBMP (unmodified adhesive, control), HNT (SBMP modified with HNT), CHX10 (SBMP modified with HNT loaded with CHX10%), and CHX20 (SBMP modified with HNT loaded with CHX20%). Changes in the degree of conversion (DC%), Knoop hardness (KHN), water sorption (WS), solubility (SL), antimicrobial activity, cytotoxicity, and anti-matrix metalloproteinase [MMP-1] activity (collagenase-I) were evaluated. In regards to DC%, two-way ANOVA followed by Tukey's post-hoc test revealed that only the factor "adhesive" was statistically significant (p < 0.05). No significant differences were detected in DC% when 20 s light-curing was used (p > 0.05). For Knoop microhardness, one-way ANOVA followed by the Tukey's test showed statistically significant differences when comparing HNT (20.82 ± 1.65) and CHX20% (21.71 ± 2.83) with the SBMP and CHX10% groups. All adhesives presented similar WS and cytocompatibility. The CHX-loaded nanotube-modified adhesive released enough CHX to inhibit the growth of S. mutans and L. casei. Adhesive eluates were not able to effectively inhibit MMP-1 activity. The evaluation of higher CHX concentrations might be necessary to provide an effective and predictable MMP inhibition. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res B Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 868-875, 2019.

Challenges and Recent Progress in Oral Drug Delivery Systems for Biopharmaceuticals

Routes of drug administration and the corresponding physicochemical characteristics of a given route play significant roles in therapeutic efficacy and short term/long term biological effects. Each delivery method has favorable aspects and limitations, each requiring a specific delivery vehicles design. Among various routes, oral delivery has been recognized as the most attractive method, mainly due to its potential for solid formulations with long shelf life, sustained delivery, ease of administration and intensified immune response. At the same time, a few challenges exist in oral delivery, which have been the main research focus in the field in the past few years. The present work concisely reviews different administration routes as well as the advantages and disadvantages of each method, highlighting why oral delivery is currently the most promising approach. Subsequently, the present work discusses the main obstacles for oral systems and explains the most recent solutions proposed to deal with each issue.

TiO2 decorated functionalized halloysite nanotubes (TiO2@HNTs) and photocatalytic PVC membranes synthesis, characterization and its application in water treatment

In this study photocatalyst, TiO₂@HNTs were prepared by  synthesizing TiO₂ nanoparticles in situ on the  functionalized halloysite nanotubes (HNTs) surface. Photocatalytic PVC membrane TiO₂@HNTs M2 (2 wt.%) and TiO₂@HNTs M3 (3 wt.%) were also prepared. Photocatalyst TiO₂@HNTs and photocatalytic PVC membranes were used to study the photocatalytic activity against the methylene blue (MB) and rhodamine B (RB) dyes in UV batch reactor. The structure and morphology of photocatalyst and photocatalytic PVC membrane were characterized by fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), UV-Vis spectrophotometer and photoluminescence (PL). The PL study showed that the oxygen vacancies and surface hydroxyl groups present on the surface of TiO₂@HNTs act as excellent traps for charge carrier, reducing the electron-hole recombination rate.TiO₂@HNTs 2 (2 wt.%) and TiO₂@HNTs 3 (3 wt.%) degraded MB dye up to 83.21%, 87.47% and RB dye up to 96.84% and 96.87%, respectively. TiO₂@HNT photocatalyst proved to be stable during the three consecutive cycle of photocatalytic degradation of the RB dye. TiO₂@HNTs M2 and TiO₂@HNTs M3 degraded MB dye up to 27.19%, 42.37% and RB dye up to 30.78%, 32.76%, respectively. Photocatalytic degradation of both the dyes followed the first-order kinetic model. Degradation product analysis was done using the liquid chromatography–mass spectrometry (LC-MS) and the results showed that the dye degradation was initiated by demethylation of the molecule. MB and RB dye degradation reaction were tested by TBA and IPA as OH^* and H⁺ scavengers respectively. Mechanism of photocatalytic activity of TiO₂@HNTs and photocatalytic PVC membrane were also explained.

Halloysite nanotubes as tools to improve the actual challenge of fixed doses combinations in tuberculosis treatment

Halloysite nanotubes (HLNTs) were used as nanocarriers of the tuberculostatic agent isoniazid (INH), a BCS (Biopharmaceutics Classification System) class III drug. Self-assembling nanohybrids (INH-loaded HLNTs) with an average outer diameter of 90 nm and polydispersity index of 0.7 approximately, were obtained by spontaneous adsorption of INH molecules to HLNTs powder in aqueous medium. The nanohybrids were aimed to improve oral drug bioavailability and reduce physicochemical incompatibility of INH with other concomitantly administered tuberculostatic agents. In vitro drug release from INH-loaded HLNTs was successfully fitted to a diffusive kinetic law founded on the adsorption-desorption equilibrium between drug molecules in solution and solid inorganic excipients. INH-loaded HLNTs showed good in vitro biocompatibility toward Caco-2 cells at the concentrations studied (up to 1233 μg/mL), with improved cell proliferation. Permeability tests showed that INH transport across Caco-2 cellular membranes was greatly enhanced and fluorescent microscopy confirmed that the drug encapsulated into nanohybrid was effectively internalized by the cells. INH-loaded HLNTs enhanced stability of the drug in presence of other tuberculostatic agents, both in binary and quaternary combinations. It has been demonstrated that simple interaction between INH with HLNTs leads to drug permeability and stability improvements that could greatly facilitate the design of multiple drug dosage forms, an actual challenge in oral treatment of tuberculosis. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Adsorption of phosphate on iron oxide doped halloysite nanotubes

Excess phosphate in water is known to cause eutrophication, and its removal is imperative. Nanoclay minerals are widely used in environmental remediation due to their low-cost, adequate availability, environmental compatibility, and adsorption efficiency. However, the removal of anions with nanoclays is not very effective because of electrostatic repulsion from clay surfaces with a net negative charge. Among clay minerals, halloysite nanotubes (HNTs) possess a negatively charged exterior and a positively charged inner lumen. This provides an increased affinity for anion removal. In this study, HNTs are modified with nano-scale iron oxide (Fe₂O₃) to enhance the adsorption capacity of the nanosorbent. This modification allowed for effective distribution of these oxide surfaces, which are known to sorb phosphate via ligand exchange and by forming inner-sphere complexes. A detailed characterization of the raw and (Fe₂O₃) modified HNTs (Fe-HNT) is conducted. Influences of Fe₂O₃ loading, adsorbent dosage, contact time, pH, initial phosphate concentration, and coexisting ions on the phosphate adsorption capacity are studied. Results demonstrate that adsorption on Fe-HNT is pH-dependent with fast initial adsorption kinetics. The underlying mechanism is identified as a combination of electrostatic attraction, ligand exchange, and Lewis acid-base interactions. The nanomaterial provides promising results for its application in water/wastewater treatment.

New Method for the Corrosion Resistance of AZ31 Mg Alloy with a Porous Micro-Arc Oxidation Membrane as an Ionic Corrosion Inhibitor Container

This work introduces a new composite anticorrosion coating for the AZ31 magnesium alloy, based on the synergistic effect of an organic/inorganic composite coating with a micro- and nanoporous micro-arc oxidation (MAO) membrane as the container of ionic corrosion inhibitor (M-16). The surface morphologies and size of the micro/nanocontainers in the porous MAO membrane before and after filling with M-16 corrosion inhibitor are examined by scanning electron microscopy (SEM). The effectiveness of M-16 for corrosion suppression on AZ31 Mg alloy with and without epoxy coating as the top sealing layer is demonstrated by electrochemical impedance spectroscopy (EIS) and salt spray tests. The potentiodynamic polarization and electrochemical impedance spectroscopy measurements show that, compared with the bare AZ31 Mg alloys, the composite coating has superior corrosion resistance with the a lower corrosion current (9.7 × 10^-9 A/cm²) and a higher protection efficiency (99.3%) after immersion in 3.5 wt % NaCl solution and, meanwhile, has stronger salt spray resistance within 30 days. The results demonstrate the synergistic effect of the isolation protection of the micro-arc oxidation layer and the inhibition of M-16 and that the epoxy coating contributed to the protection for AZ31 Mg substrate to some extent. Therefore, it is anticipated that the composite coating has a potential application in the protection of metals and their alloys.

Enhanced Antioxidant Activity under Biomimetic Settings of Ascorbic Acid Included in Halloysite Nanotubes

Antioxidant activity of native vitamin C (ascorbic acid, AH₂) is hampered by instability in solution. Selective loading of AH₂ into the inner lumen of natural halloysite nanotubes (HNT) yields a composite nanoantioxidant (HNT/AH₂), which was characterized and investigated for its reactivity with the persistent 1,1-diphenyl-2-picrylhydrazyl (DPPH•) radical and with transient peroxyl radicals in the inhibited autoxidation of organic substrates, both in organic solution (acetonitrile) and in buffered (pH 7.4) water in comparison with native AH₂. HNT/AH₂ showed excellent antioxidant performance being more effective than native ascorbic acid by 131% in acetonitrile and 290% (three-fold) in aqueous solution, under identical settings. Reaction with peroxyl radicals has a rate constant of 1.4 × 10⁶ M-1 s-1 and 5.1 × 10⁴ M-1 s-1, respectively, in buffered water (pH 7.4) and acetonitrile, at 30 °C. Results offer physical understanding of the factors governing HNT/AH₂ reactivity. Improved performance of HNT/AH₂ is unprecedented among forms of stabilized ascorbic acid and its relevance is discussed on kinetic grounds.

Core/Shell Gel Beads with Embedded Halloysite Nanotubes for Controlled Drug Release

The use of nanocomposites based on biopolymers and nanoparticles for controlled drug release is an attractive notion. We used halloysite nanotubes that were promising candidates for the loading and release of active molecules due to their hollow cavity. Gel beads based on chitosan with uniformly dispersed halloysite nanotubes were obtained by a dropping method. Alginate was used to generate a coating layer over the hybrid gel beads. This proposed procedure succeeded in controlling the morphology at the mesoscale and it had a relevant effect on the release profile of the model drug from the nanotube cavity.

Nanocontainer-based self-healing coatings: current progress and future perspectives

Nanocontainers add more functionalities to the standard coating formulations.

Layered composite based on halloysite and natural polymers: a carrier for the pH controlled release of drugs

We have prepared new biohybrid materials based on halloysite nanotubes and natural polymers (alginate and chitosan) for the controlled and sustained release of bioactive species.

Facile fabrication of polydopamine nanotubes for combined chemo-photothermal therapy

Polydopamine nanoparticles with higher drug loading capacity and enhanced photothermal behavior.

Fabrication and characterization of biocompatible pH responsive halloysite nanotubes grafted with sodium alginate for sustained release of phenytoin sodium

Schematic design of a new method for fabrication of biocompatible pH sensitive halloysite nanocomposites for controlled release of phenytoin sodium.

Tubule Nanoclay-Organic Heterostructures for Biomedical Applications

Natural halloysite nanotubes (HNTs) show unique hollow structure, high aspect ratio and adsorption ability, good biocompatibility, and low toxicity, which allow for various biomedical applications in the diagnosis and treatment of diseases. Here, advances in self-assembly of halloysite for cell capturing and bacterial proliferation, coating on biological surfaces and related drug delivery, bone regeneration, bioscaffolds, and cell labeling are summarized. The in vivo toxicity of these clay nanotubes is discussed. Halloysite allows for 10-20% drug loading and can extend the delivery time to 10-100 h. These drug-loaded nanotubes are doped into the polymer scaffolds to release the loaded drugs. The rough surfaces fabricated by self-assembly of the clay nanotubes enhance the interactions with tumor cells, and the cell capture efficacy is significantly improved. Since halloysite has no toxicity toward microorganisms, the bacteria composed within these nanotubes can be explored in oil/water emulsion for petroleum spilling bioremediation. Coating of living cells with halloysite can control the cell growth and is not harmful to their viability. Quantum dots immobilized on halloysite were employed for cell labeling and imaging. The concluding academic results combined with the abundant availability of these natural nanotubes promise halloysite applications in personal healthcare and environmental remediation.

Functional Carboxymethylcellulose/Zein Bionanocomposite Films Based on Neomycin Supported on Sepiolite or Montmorillonite Clays

The present work introduces new functional bionanocomposite materials based on layered montmorillonite and fibrous sepiolite clays and two biopolymers (carboxymethylcellulose polysaccharide and zein protein) to produce drug-loaded bionanocomposite films for antibiotic topical delivery. Neomycin, an antibiotic indicated for wound infections, was employed as the model drug in this study. The physical properties and the antimicrobial activity of these materials were evaluated as a function of the type of hybrid and the amount of zein protein incorporated in the bionanocomposite films. In addition, the interfacial and physicochemical properties of these new clay-drug hybrids have been studied through a combination of experimental and computational methodologies, where the computational studies confirm the intercalation of neomycin into the montmorillonite layers and the possible penetration of the drug in the tunnels of sepiolite, as pointed out by N2 adsorption and X-ray diffraction techniques. The antimicrobial activity of these bionanocomposite materials show that the films based on montmorillonite-neomycin display a more pronounced inhibitory effect of the bacterial growth than those prepared with the sepiolite-neomycin hybrid. Such effect can be related to the difficult release of neomycin adsorbed on sepiolite due to a strong interaction between both components.

Excellent Efficacy of MOF Films for Bronze Artwork Conservation: The Key Role of HKUST-1 Film Nanocontainers in Selectively Positioning and Protecting Inhibitors

Development of metal-organic framework (MOF) films for selectively positioning inhibitors in metallic anticorrosion applications remains a substantial challenge due to the difficulty of controlling the arrangement of inhibitor molecules in MOF pores. Cetyltrimethyl ammonium bromide (CTAB), which contains hydrophobic and hydrophilic tails, was chosen as a prototypical inhibitor and was selectively located in the pores of the classic HKUST-1 thin film on a metallic surface. Experimental results reveal that the prepared CTAB@HKUST-1 film displays good metallic anticorrosion performances, especially for bronze conservation. A possible anticorrosion mechanism of CTAB@HKUST-1 is proposed and fully discussed. The study provides an avenue for developing MOF-based thin films for metallic anticorrosion applications to address the environmental development issues related to corrosion.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Halloysite Nanotubes as an Effective and Recyclable Adsorbent for Removal of Low-Concentration Antibiotics Ciprofloxacin

In this work, halloysite nanotubes (HNTs) without modification were used as an efficient adsorbent to explore its natural adsorption capability, which showed excellent adsorption ability for low-concentration ciprofloxacin (CIP). The physicochemical properties of HNTs before and after adsorption were investigated by several characterization techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N2 adsorption–desorption analysis, X-ray diffractometer (XRD), and zeta potential analysis. The influences of temperature, initial CIP concentration, adsorbent dosage, and pH value on CIP adsorption performance were also studied. The kinetics analysis revealed that CIP adsorption on HNTs was a kind of monolayer adsorption process and followed a pseudo-second-order rate equation. The zeta potential result indicated that electrostatic interaction between HNTs and CIP molecules was possibly responsible for the adsorption performance. Moreover, HNTs showed no apparent loss in CIP adsorption capability after five cycles, exhibiting potential applications in wastewater treatment.

Hydrogel applications for adsorption of contaminants in water and wastewater treatment

During the last decade, hydrogels have been used as potential adsorbents for removal of contaminants from aqueous solution. To improve the adsorption efficiency, there are numerous different particles that can be chosen to encapsulate into hydrogels and each particle has their respective advantages. Depending on the type of pollutants and approaching method, the particles will be used to prepare hydrogels. The hydrogels commonly applied in water/wastewater treatment was mainly classified into three classes according to their shape included hydrogel beads, hydrogel films, and hydrogel nanocomposites. In review of many recently research papers, we take a closer look at hydrogels and their applications for removal of contaminants, such as heavy metal ion, dyes, and radionuclides from water/wastewater in order to elucidate the reactions between contaminants and particles and potential for recycling and regeneration of the post-treatment hydrogels. Graphical abstract ᅟ.

Selective adsorption of oppositely charged PNIPAAM on halloysite surfaces: a route to thermo-responsive nanocarriers

Halloysite nanotubes were functionalized with stimuli-responsive macromolecules to generate smart nanohybrids. Poly(N-isopropylacrylamide)-co-methacrylic acid (PNIPAAM-co-MA) was selectively adsorbed into halloysite lumen by exploiting electrostatic interactions. Amine-terminated PNIPAAM polymer was also investigated that selectively interacts with the outer surface of the nanotubes. The adsorption site has a profound effect on the thermodynamic behavior and therefore temperature responsive features of the hybrid material. The drug release kinetics was investigated by using diclofenac as a non-steroidal anti-inflammatory drug model. The release kinetics depends on the nanoarchitecture of the PNIPAAM/halloysite based material. In particular, diclofenac release was slowed down above the LCST for PNIPAAM-co-MA/halloysite. Opposite trends occurred for halloysite functionalized with PNIPAAM at the outer surface. This work represents a further step toward the opportunity to extend and control the delivery conditions of active species, which represent a key point in technological applications.

Halloysite nanotubes in analytical sciences and in drug delivery: A review

Halloysite (HNT) is a natural inorganic mineral that has many applications in manufacturing. This review (with 192 references) covers (a) the chemical properties of halloysites, (b) the effects of alkali and acid etching on the loading capacity and the release behavior of halloysites, (c) the use of halloysite nanotubes in analytical sciences and drug delivery, and (d) recent trends in the preparation of magnetic HNTs. Synthetic methods such as co-precipitation, thermal decomposition, and solvothermal method are discussed, with emphasis on optimal magnetization. In the analytical field, recent advancements are summarized in terms of applications of HNT-nanocomposites for extraction and detection of heavy metal ions, dyes, organic pollutants, and biomolecules. The review also covers methods for synthesizing molecularly imprinted polymer-modified HNTs and magnetic HNTs. With respect to drug delivery, the toxicity, techniques for drug loading and the various classes of drug-halloysite nanocomposites are discussed. This review gives a general insight on the utilization of HNT in analytical determination and drug delivery systems which may be useful for researchers to generate new ideas. Graphical abstract Schematic presentation of the structure of halloysite nanotubes, selected examples of modifications and functionalization, and represetative field of applications.