Indium Oxide as a Superior Catalyst for Methanol Synthesis by CO2 Hydrogenation

Methanol synthesis by CO2 hydrogenation is attractive in view of avoiding the environmental implications associated with the production of the traditional syngas feedstock and mitigating global warming. However, there still is a lack of efficient catalysts for such alternative processes. Herein, we unveil the high activity, 100 % selectivity, and remarkable stability for 1000 h on stream of In2 O3 supported on ZrO2 under industrially relevant conditions. This strongly contrasts to the benchmark Cu-ZnO-Al2 O3 catalyst, which is unselective and experiences rapid deactivation. In-depth characterization of the In2 O3 -based materials points towards a mechanism rooted in the creation and annihilation of oxygen vacancies as active sites, whose amount can be modulated in situ by co-feeding CO and boosted through electronic interactions with the zirconia carrier. These results constitute a promising basis for the design of a prospective technology for sustainable methanol production.

Enhanced wetting of Cu on ZnO by migration of subsurface oxygen vacancies

Metal adhesion on metal oxides is strongly controlled by the oxide surface structure and composition, but lack of control over the surface conditions often limits the possibilities to exploit this in opto- and micro-electronics applications and heterogeneous catalysis where nanostructural control is of utmost importance. The Cu/ZnO system is among the most investigated of such systems in model studies, but the presence of subsurface ZnO defects and their important role for adhesion on ZnO have been unappreciated so far. Here we reveal that the surface-directed migration of subsurface defects affects the Cu adhesion on polar ZnO(0001) in the technologically interesting temperature range up to 550 K. This leads to enhanced adhesion and ultimately complete wetting of ZnO(0001) by a Cu overlayer. On the basis of our experimental and computational results we demonstrate a mechanism which implies that defect concentrations in the bulk are an important, and possibly controllable, parameter for the metal-on-oxide growth.

Comprehensive elucidation of metal-support interactions is important for controlling and improving their performances in a range of pertinent technologies. Here, the authors reveal how subsurface defects influence the adhesion and wetting of a metal on the surface of a metal oxide.

Effect of the components' interface on the synthesis of methanol over Cu/ZnO from CO2/H2: a microkinetic analysis based on DFT + U calculations

During the methanol synthesis over Cu/ZnO catalysts, the phase interface was observed to supply spillover hydrogen to active copper sites.

Cu/ZnO nanocatalysts in response to environmental conditions: surface morphology, electronic structure, redox state and CO2 activation

Methanol synthesis is one of the landmarks of heterogeneous catalysis due to the great industrial significance of methanol as a clean liquid fuel and as a raw material for industry.

The active site of methanol synthesis over Cu/ZnO/Al2O3 industrial catalysts

One of the main stumbling blocks in developing rational design strategies for heterogeneous catalysis is that the complexity of the catalysts impairs efforts to characterize their active sites. We show how to identify the crucial atomic structure motif for the industrial Cu/ZnO/Al(2)O(3) methanol synthesis catalyst by using a combination of experimental evidence from bulk, surface-sensitive, and imaging methods collected on real high-performance catalytic systems in combination with density functional theory calculations. The active site consists of Cu steps decorated with Zn atoms, all stabilized by a series of well-defined bulk defects and surface species that need to be present jointly for the system to work.

Knowledge-based development of a nitrate-free synthesis route for Cu/ZnO methanol synthesis catalysts via formate precursors

High-performance Cu/ZnO/(Al(2)O(3)) methanol synthesis catalysts are conventionally prepared by co-precipitation from nitrate solutions and subsequent thermal treatment. A new synthesis route is presented, which is based on similar preparation steps and leads to active catalysts, but avoids nitrate contaminated waste water.

The role of chemistry in the energy challenge

Chemistry with its key targets of providing materials and processes for conversion of matter is at the center stage of the energy challenge. Most energy conversion systems work on (bio)chemical energy carriers and require for their use suitable process and material solutions. The enormous scale of their application demands optimization beyond the incremental improvement of empirical discoveries. Knowledge-based systematic approaches are mandatory to arrive at scalable and sustainable solutions. Chemistry for energy, "ENERCHEM" contributes in many ways already today to the use of fossil energy carriers. Optimization of these processes exemplified by catalysis for fuels and chemicals production or by solid-state lightning can contribute in the near future substantially to the dual challenge of energy use and climate protection being in fact two sides of the same challenge. The paper focuses on the even greater role that ENERCHEM will have to play in the era of renewable energy systems where the storage of solar energy in chemical carries and batteries is a key requirement. A multidisciplinary and diversified approach is suggested to arrive at a stable and sustainable system of energy conversion processes. The timescales for transformation of the present energy scenario will be decades and the resources will be of global economic dimensions. ENERCHEM will have to provide the reliable basis for such technologies based on deep functional understanding.

Surface chemistry of Cu in the presence of CO2 and H2O

The chemical nature of copper and copper oxide (Cu 2O) surfaces in the presence of CO 2 and H 2O at room temperature was investigated using ambient pressure X-ray photoelectron spectroscopy. The studies reveal that in the presence of 0.1 torr CO 2 several species form on the initially clean Cu, including carbonate CO 3 (2) (-), CO 2 (delta-) and C (0), while no modifications occur on an oxidized surface. The addition of 0.1 ML Zn to the Cu results in the complete conversion of CO 2 (delta-) to carbonate. In a mixture of 0.1 torr H 2O and 0.1 torr CO 2, new species are formed, including hydroxyl, formate and methoxy, with H 2O providing the hydrogen needed for the formation of hydrogenated species.

Highly Mixed Phases in Ball-milled Cu/ZnO Catalysts: An EXAFS and XANES Study

New highly mixed phases have been identified in Cu/ZnO systems by EXAFS and XANES at both the Cu and Zn K-edge. The phases were generated by ball-milling Cu(2)O/ZnO mixtures under three different atmospheres of synthetic air (SA), SA + CO(2) and CO(2). The system milled in CO(2) shows disproportionation of Cu(2)O into Cu(0), Cu(1+) (cuprite Cu(2)O-type phase) and Cu(2+) (tenorite CuO-type phase), while most of the Zn(2+) is transformed into a nanocrystalline/amorphous ZnO-type zincite that forms a superficial mixture of oxide and carbonate phases. When synthetic air is added to the CO(2) atmosphere, ball milling results in the oxidation of nearly half the Cu(1+) into Cu(2+) with no Cu metal formed. The copper phase in this material is almost entirely amorphous. In SA, a significant amount of Cu(2+)- and Zn(2+)-based phases appears to react to form a nanocrystalline/amorphous Cu(1-x)Zn(x)O (x approximately 0.3) solid solution. This distorted rock saltlike solid solution, in which Zn and Cu feature different octahedral environments, was never reported before. It is thought to be formed by incorporation of Zn(2+) in the Cu fcc sublattice of the cuprite Cu(2)O matrix and the concomitant oxidation of Cu(1+) into Cu(2+). The formation of such a highly mixed Cu(1-x)Zn(x)O phase indicates strong Cu/Zn interaction in the Cu/ZnO system, which also suggests the presence of highly mixed phases in conventionally prepared activated catalysts.

Redox chemistry of Cu colloids probed by adsorbed CO: an in situ attenuated total reflection Fourier transform infrared study

The IR spectroscopic investigation of both the adsorption of carbon monoxide and the interaction of oxygen and CO on the surface of copper colloids is described for the first time. The copper colloids were produced by pyrolysis of [Cu(OCH(Me)CH(2)NMe(2))(2)] in hot n-hexadecylamine. Upon contact to synthetic air Cu/Cu(x)O core-shell particles are formed. The treatment of these particles with CO results in the reestablishment of pure Cu(0) particles. These results demonstrate that small molecules penetrate the ligand shell of the nanoparticles and reversibly adsorb at the surface without affecting the particle morphology and size distribution.