Bio-inspired nano-traps for uranium extraction from seawater and recovery from nuclear waste

An Efficient Uranium Adsorption Magnetic Platform Based on Amidoxime-Functionalized Flower-like Fe3O4@TiO2 Core-Shell Microspheres

Efficient removal of uranium (U) from aqueous solutions is crucial for ecological safety. Functionalized magnetic nanoparticles provide a promising strategy for radionuclide recovery and separation. However, designing and synthesizing magnetic adsorbents with high sorption capacity and selectivity, accompanied by excellent stability and reusability, remain a challenge. In this work, novel amidoxime-functionalized flower-like magnetic Fe₃O₄@TiO₂ core-shell microspheres are designed and synthesized to efficiently remove U(VI) from aqueous solutions and actual seawater. The magnetic Fe₃O₄ core facilitates easy separation by an external magnetic field, and flower-like TiO₂ nanosheets provide abundant specific surface areas and functionalization sites. The grafted amidoxime (AO) groups could function as a claw for catching uranium. The maximum adsorption capacity on U(VI) of the designed nanospheres reaches 313.6 mg·g^-1 at pH 6.0, and the adsorption efficiency is maintained at 97% after 10 cycles. In addition, the excellent selectivity of the magnetic recyclable AO-functioning Fe₃O₄@TiO₂ microspheres endows the potential of uranium extraction from seawater. The designed material provides an effective and applicable diagram for radioactive element elimination and enrichment.

Interface-Constrained Layered Double Hydroxides for Stable Uranium Capture in Highly Acidic Industrial Wastewater

Low acid endurance of layered double hydroxides (LDHs) limits their uranium(VI) [U(VI)] adsorption capability from harsh industrial wastewater. Here, we demonstrate magnesium-cobalt LDHs (Mg-Co LDHs) anchored in situ onto the pore channel of dendritic fibrous nanosilica (DFNS) via an interface-constrained strategy. The synergy of Mg-Co LDHs and DFNS not only improves the endurance of the Mg-Co LDH under harsh acidic conditions but also increases the number of active sites of DFNS. Thus, DFNS@Mg-Co LDH shows a high U(VI) uptake capacity (1143 mg g^-1) at pH = 3 and C₀ = 598.7 mg L^-1, which is about 4.8-fold higher than that of pristine DFNS. The DFNS@Mg-Co LDH exhibits excellent U(VI) uptake in various background water circumstances due to its acid endurance and highly selective adsorption. This interface-constrained strategy provides LDH materials with durability under extremely acidic conditions along with a high adsorption capacity, which is promising for uranium capture from various water fields.

Graphene Oxide Membranes for Tunable Ion Sieving in Acidic Radioactive Waste

Graphene oxide (GO) membranes with unique nanolayer structure have demonstrated excellent separation capability based on their size-selective effect, but there are few reports on achieving ion-ion separation, because it is difficult to inhibit the swelling effect of GO nano sheets as well as to precisely control the interlayer spacing d to a specific value between the sizes of different metal ions. Here, selective separation of uranium from acidic radioactive waste containing multication is achieved through a precise dual-adjustment strategy on d. It is found that GO swelling is greatly restricted in highly acidic solution due to protonation effect. Then the interlayer spacing is further precisely reduced to below the diameter of uranyl ion by increasing the oxidation degree of GO. Sieving uranyl ions from other nuclide ions is successfully realized in pH =3-3 mol L-1 nitric acid solutions.

Rapid and selective magnetic separation of uranium in seawater and groundwater using novel phosphoramidate functionalized citrate-Fe3O4@Ag nanoparticles

One-pot magnetic separation of uranium (U) in seawater and groundwater samples has been made possible by synthesizing phosphoramidate functionalized Ag coated citrate-Fe₃O₄ nanoparticles (NPs). The magnetic saturation value of these functionalized NPs is 27.1 emu g^-1. The synergistic extraction mechanism of U(VI) ion by the surface-modified phosphoramidate and citrate molecules make these NPs highly selective towards U(VI). The adsorption kinetics follows a pseudo-second-order model and the adsorption isotherm fits successfully to the Langmuir adsorption model. The functionalized NPs show quantitative extraction efficiency in the pH range of 6.5-8 with a maximum loading capacity (Q_m) of 108.7 mg g^-1. The equilibration time required by these functionalized NPs to attain the Q_m value is 120 s. The recycling of these NPs can be done up to 5-6 times with 1.0 mol L^-1 of Na₂CO₃ or NH₄OH for quantitative extraction of U(VI). These functionalized NPs show high resilience towards large number of naturally abundant metal ions.

Bayberry tannin directed assembly of a bifunctional graphene aerogel for simultaneous solar steam generation and marine uranium extraction

Solar steam generation and marine uranium extraction are promising methods for obtaining sufficient fresh water and nuclear fuel from the ocean, respectively, for overcoming water and energy crises. In this work, a bayberry tannin (BT) directed assembly of a bifunctional graphene aerogel (GA) has been designed for simultaneous solar steam generation (1.80 kg m-2 h-1 with a high solar efficiency of 95.5%) and marine uranium extraction (230.10 mg g-1 within 6 h). BT molecules are uniformly decorated inside the typical porous channels of GA, which integrates the excellent uranium binding of BT and the efficient light-to-heat conversion of GA. It is found that the hydrophilic nature of BT can improve fluid infiltration in the GA matrix for solar steam generation while the steam generation induced transpiration can accelerate the adsorption of uranium ions for marine uranium extraction. The unique bifunctional ability of the BT-GA composite paves a new way to utilize the abundant resources in the ocean.

In-situ synthesis of uranyl-imprinted nanocage for selective uranium recovery from seawater

Adaptive coordination structure is vital for selective uranium extraction from seawater. By strategy of molecular imprinting, uranyl is introduced into the  m ultivariate metal-organic framework (MOF) during the synthesis process to guide the  in-situ  construction of proper nanocage structure for targeting uranyl binding. Except for  the  coordination between uranium with four oxygen from the materials, the axial oxygen of uranyl also forms hydrogen bonds with hydrogen from the phenolic hydroxyl group, which enhances the binding affinity of the material to uranyl. Attributing to the high binding affinity, the adsorbent shows high uranium binding selectivity to uranyl against not only the interfering metal ions, but also the carbonate group that coordinates with uranyl to form [UO 2 (CO) 3 ] 4 -  in seawater. In natural seawater, the adsorbent realizes a high uranium adsorption capacity of 7.35 mg g -1 , t ogether with an 18.38 times higher selectivity to vanadium.  Integrated into account the high reusability, this adsorbent is a promising alternative for uranium recovery from seawater.

Low Band Gap Benzoxazole-Linked Covalent Organic Frameworks for Photo-Enhanced Targeted Uranium Recovery

The inherent features of covalent organic frameworks (COFs) make them highly attractive for uranium recovery applications. A key aspect yet to be explored is how to improve the selectivity and efficiency of COFs for recovering uranium from seawater. To achieve this goal, a series of robust and hydrophilic benzoxazole-based COFs is developed (denoted as Tp-DBD, Bd-DBD, and Hb-DBD) as efficient adsorbents for photo-enhanced targeted uranium recovery. Benefiting from the hydroxyl groups and the formation of benzoxazole rings, the hydrophilic Tp-DBD shows outstanding stability and chemical reduction properties. Meanwhile, the synergistic effect of the hydroxyl groups and the benzoxazole rings in the π-conjugated frameworks significantly decrease the optical band gap, and improve the affinity and capacity to uranium recovery. In seawater, the adsorption capacity of uranium is 19.2× that of vanadium, a main interfering metal in uranium extraction.

Supramolecularly Poly(amidoxime)-Loaded Macroporous Resin for Fast Uranium Recovery from Seawater and Uranium-Containing Wastewater

Uranium is an extremely abundant resource in seawater that could supply nuclear fuel for over the long-term, but it is tremendously difficult to extract. Here, a new supramolecular poly(amidoxime) (PAO)-loaded macroporous resin (PLMR) adsorbent has been explored for highly efficient uranium adsorption. Through simply immersing the macroporous resin in the PAO solution, PAOs can be firmly loaded on the surface of the nanopores mainly by hydrophobic interaction, to achieve the as-prepared PLMR. Unlike existing amidoxime-based adsorbents containing many inner minimally effective PAOs, almost all the PAOs of PLMR have high uranium adsorption efficiency because they can form a PAO-layer on the nanopores with molecular-level thickness and ultrahigh specific surface area. As a result, this PLMR has highly efficient uranium adsorbing performance. The uranium adsorption capacity of the PLMR was 157 mg/g (the U_PAO in the PLMR was 1039 mg/g), in 32 ppm uranium-spiked seawater for 120 h. Additionally, uranium in 1.0 L 100 ppb U-spiked both water and seawater can be removed quickly and the recovery efficiency can reach 91.1 ± 1.7% and 86.5 ± 1.9%, respectively, after being filtered by a column filled with 200 mg PLMR at 300 mL/min for 24 h. More importantly, after filtering 200 T natural seawater with 200 g PLMR for only 10 days, the uranium-uptake amount of the PLMR reached 2.14 ± 0.21 mg/g, and its average uranium adsorption speed reached 0.214 mg/(g·day) which is very fast among reported amidoxime-based adsorbents. This new adsorbent has great potential to quickly and massively recover uranium from seawater and uranium-containing wastewater. Most importantly, this work will provide a simple but general strategy to greatly enhance the uranium adsorption efficiency of amidoxime-functionalized adsorbents with ultrahigh specific surface area via supramolecular interaction, and even inspire the exploration of other adsorbents.

Sulfonated perylene-based conjugated microporous polymer as a high-performance adsorbent for photo-enhanced uranium extraction from seawater

A sulfonated perylene-based adsorbent is prepared for photo-enhanced uranium extraction from seawater. Owing to the photo-enhanced effect, the uranium extraction capacity of PyB-SO₃H in seawater reaches 1989 mg g⁻¹, with 90% extraction efficiency.

Spatial Engineering Direct Cooperativity between Binding Sites for Uranium Sequestration

Preorganization is a basic design principle used by nature that allows for synergistic pathways to be expressed. Herein, a full account of the conceptual and experimental development from randomly distributed functionalities to a convergent arrangement that facilitates cooperative binding is given, thus conferring exceptional affinity toward the analyte of interest. The resulting material with chelating groups populated adjacently in a spatially locked manner displays up to two orders of magnitude improvement compared to a random and isolated manner using uranium sequestration as a model application. This adsorbent shows exceptional extraction efficiencies, capable of reducing the uranium concentration from 5 ppm to less than 1 ppb within 10 min, even though the system is permeated with high concentrations of competing ions. The efficiency is further supported by its ability to extract uranium from seawater with an uptake capability of 5.01 mg g-1, placing it among the highest-capacity seawater uranium extraction materials described to date. The concept presented here uncovers a new paradigm in the design of efficient sorbent materials by manipulating the spatial distribution to amplify the cooperation of functions.

Unexpected ultrafast and highly efficient removal of uranium from aqueous solutions by a phosphonic acid and amine functionalized polymer adsorbent

P(DMAA–B2MP) was prepared by solvothermal polymerization and exhibits fast and efficient sorption of uranium(vi) from aqueous solutions.

DNA nano-pocket for ultra-selective uranyl extraction from seawater

Extraction of uranium from seawater is critical for the sustainable development of nuclear energy. However, the currently available uranium adsorbents are hampered by co-existing metal ion interference. DNAzymes exhibit high selectivity to specific metal ions, yet there is no DNA-based adsorbent for extraction of soluble minerals from seawater. Herein, the uranyl-binding DNA strand from the DNAzyme is polymerized into DNA-based uranium extraction hydrogel (DNA-UEH) that exhibits a high uranium adsorption capacity of 6.06 mg g⁻¹ with 18.95 times high selectivity for uranium against vanadium in natural seawater. The uranium is found to be bound by oxygen atoms from the phosphate groups and the carbonyl groups, which formed the specific nano-pocket that empowers DNA-UEH with high selectivity and high binding affinity. This study both provides an adsorbent for uranium extraction from seawater and broadens the application of DNA for being used in recovery of high-value soluble minerals from seawater.

The extraction of metals from seawater is an area of great potential; especially for the extraction of uranium. Here, the authors report on the synthesis of a DNA based uranium adsorbent with high selectivity and demonstrate the potential for the DNA based extraction of high-value soluble minerals from seawater.

Facile preparation and adsorption performance of low-cost MOF@cotton fibre composite for uranium removal

A novel composite MOF@cotton fibre (HCF) was prepared and characterized by FTIR, SEM, XPS and TGA. The effect of various parameters on the adsorption efficiency, such as the solution pH, contact time, initial U(VI) concentration and temperature, was studied. The maximal sorption capacity (Qm) is 241.28 mg g-1 at pH 3.0 for U(VI) according to the Langmuir isotherm adsorption model, and the kinetic and thermodynamic data reveal a relatively fast entropy-driven process (ΔH0 = 13.47 kJ mol-1 and ΔS0 = 75.47 J K-1 mol-1). The removal efficiency of U(VI) by HCF is comparable with that of pure cotton fibre and as-prepared MOF (noted as HST). However, the HST composite with cotton fibre significantly improved the treatment process of U(VI) from aqueous solutions in view of higher removal efficiency, lower cost and faster solid-liquid separation. Recycling experiments showed that HCF can be used up to five times with less than 10% efficiency loss.

Polymer Nanorings with Uranium Specific Clefts for Selective Recovery of Uranium from Acidic Effluents via Reductive Adsorption

Nanostructured polymeric materials, functionalized with an appropriate receptor, have opened up newer possibilities for designing a reagent that shows analyte-specific recognition and efficient scavenging of an analyte that has either a detrimental influence on human physiology and environment or on its recovery for further value addition. Higher active surface area, morphological diversity, synthetic tunability for desired surface functionalization, and the ease of regeneration of a nanostructured material for further use have provided such materials with a distinct edge over conventional reagents. The use of a biodegradable polymeric backbone has an added significance owing to the recent concern over the impact of polymers on the environment. Functionalization of biodegradable sodium alginate with AENA (6.85% grafting) as the receptor functionality led to a unique open framework nanoring (NNRG) morphology with a favorable spatial orientation for specific recognition and efficient binding to uranyl ions (U) in an aqueous medium over a varied pH range. Nanoring morphology was confirmed by transmission electron microscopy and atomic force microscopy images. The nanoscale design maximizes the surface area for the molecular scavenger. A combination of all these features along with the reversible binding phenomenon has made NNRG a superior reagent for specific, efficient uptake of UO₂²⁺ species from an acidic (pH 3-4) solution and compares better than all existing UO₂²⁺-scavengers reported till date. This could be utilized for the recovery of uranyl species from a synthetic acidic effluent of the nuclear power. The results of the U uptake experiments reveal a maximum adsorption capacity of 268 mg of U per g of NNRG in a synthetic nuclear effluent. X-ray photoelectron spectroscopy studies revealed a reductive complexation process and stabilization of U(IV)-species in adsorbed uranium species (U@NNRG).

Effective removal of U(VI) and Eu(III) by carboxyl functionalized MXene nanosheets

With the development of nuclear power, the negative environmental impact such as radioactive pollution has become an urgent issue to impede the utilization of nuclear energy. The construction of promising organic-inorganic hybrid materials is considered as an effective strategy for environmental remediation of radioactive contamination. In this work, two-dimensional transition metal carbide (MXene), an emerging inorganic layered material, has been successfully modified by carboxyl terminated aryl diazonium salt to both enhance its chelating ability to radionuclides and improve its water stability. The carboxyl functionalized Ti₃C₂T_x MXene (TCCH) shows excellent removal ability for U(VI) and Eu(III), evidenced by ultrafast adsorption kinetics (3 min), high maximum adsorption capacities (344.8 mg/g for U and 97.1 mg/g for Eu) and high removal percentage of radionuclides from artificial groundwater (> 90%). The adsorption of U(VI) and Eu(III) on TCCH are in good accord with the Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. Ionic strength experiments, X-ray photoelectron spectroscopy (XPS) and Extended X-ray absorption fine structure (EXAFS) analyses were conducted to assess the detailed adsorption mechanism. The results reveal that the adsorption of U(VI) on TCCH follows an inner-sphere configuration, whereas the adsorption of Eu(III) is determined by both inner-sphere complexation and electrostatic interaction.

Anchoring ZIF-67 particles on amidoximerized polyacrylonitrile fibers for radionuclide sequestration in wastewater and seawater

Capturing uranium (U(VI)) ions from wastewater and seawater is highly attractive for the environment and clean energy with the increasing deficiency of land sources. Howbeit, the massive volume of water and the ultralow concentration of U(VI) pose a substantial challenge to the industrial application. Accordingly, we have synthesized a novel organic-inorganic hybrid adsorbent through in-situ growing MOF particles on electrospun polyacrylonitrile fibers (PAN) followed by modifing with amidoxime groups to form amidoximed PAN/ZIF-67 (AOPAN/ZIF) hybrid fibers. In such fibers, the N atoms from imidazole and amidoxime can improve the adsorption performance synergistically in a wide pH range, which is favorable for capturing U(VI) under nuclear wastewater and seawater. As a result, the AOPAN/ZIF fibers exhibit high adsorption amount of 498.4 mg g^-1 in U(VI) contaminated aqueous solution at pH 4. Furthermore, the adsorption amount of U(VI) reached 2.03 mg g^-1 in natural seawater after 36 d, which implies that the AOPAN/ZIF fibers may promote the development of U(VI) recovery.

Secondary Sphere Effects on Porous Polymeric Organocatalysts for CO2 Transformations: Subtle Modifications Resulting in Superior Performance

Albeit harnessing secondary sphere interactions to exert control over the reaction outcomes has primarily been applied to enzymatic and organometallic catalysis, there are seldom any studies that introduce outer-sphere modifiers into organocatalysts. This is even less in the corresponding heterogeneous catalytic system. In this contribution, we experimentally and computationally investigate the role of secondary effects in the reactivity of bromide anions toward CO₂ transformations. Six pyridinium cationic porous frameworks have been synthesized and fully characterized. Structure-activity relationships and kinetics show that the type and the location of the substituents on the cationic framework have a significant impact on the nucleophilic reactivity of their bromide counter anion. Specifically, the attachment of amine substituent to the ortho position relative to a pyridinium motif produces a remarkably efficient catalyst for CO₂ transformation, by a factor of six times greater in comparison to the pristine pyridinium-based polymer. The hydrogen-bond-interaction-promoted reagent activation and enhanced delocalization ability of bromide counter anion are believed to be the key to driving the reaction toward CO₂ utilization. These observations, therefore, champion the leverage of secondary interaction for optimizing the reactivity of organocatalysts.

Visible light driven Ti3+ self-doped TiO2 for adsorption-photocatalysis of aqueous U(VI)

The photocatalytic reduction of U(VI) is recognized as an economical and effective way for U(VI) removal/recovery from solutions. To improve the photocatalytic activity of TiO₂ under visible light, TiO₂ was hydrogenated by NaBH₄ to generate Ti³⁺ self-doped black TiO₂ (BT_n). The self-doped Ti³⁺ alongside oxygen vacancies (Ov) could act as interband level to increase visible light capture and reduce the recombination of photogenerated carriers. The obtained BT_n samples showed high performance for U(VI) elimination under near neutral conditions, and held an outstanding anti-interference for U(VI) over competing metal cations and anions. Methanol and ethanol could act as sacrificial donors, being favorable for the photocatalytic reduction of U(VI), while the presence of EDTA inhibited the photoreduction of U(VI). The BT_n photocatalysts showed relatively high stability and reusability during the photocatalysis and elution processes. The XPS, TEM and XRD results revealed that U(VI) was photo-reduced to form UO₂ on the surface of BT_n. This work may serve as an important reference for improving the photocatalytic reactivity of TiO₂ as well as for the efficient removal/recovery of U(VI) from aqueous solutions.

Stable sp2 carbon-conjugated covalent organic framework for detection and efficient adsorption of uranium from radioactive wastewater

Uranium is an important element in the nuclear industry while the discharge of radioactive wastewater can cause serious damages to the environment. In this work, an ultra-stable sp² carbon-conjugated covalent organic framework (COF-PDAN-AO) is synthesized with amidoxime-substituted monomers for detection and efficient adsorption of uranium from radioactive wastewater. Abundant amidoxime groups laced on the open 1D channels of COF-PDAN-AO exhibit exceptional accessibility and the regular pores facilitate the mass transfer. Based on these features, COF-PDAN-AO achieves ultra-low detection limit of 6.5 nM, high uranium adsorption capacity (410 mg/g) and selective interaction with uranium. In addition, various spectroscopies verify COF-PDAN-AO possesses excellent radioresistance in acidic solution. Regeneration studies have shown that COF-PDAN-AO maintained good structural stability after seven cycles. These results indicate that our sp² carbon conjugated COF can be potentially used for practical detection and adsorption of uranium from radioactive wastewater. This strategy can be extended to detection and extraction of other contaminants by designing the target ligand.

Water-locking molecule-assisted fabrication of nature-inspired Mg(OH)2 for highly efficient and economical uranium capture

With the depletion of uranium terrestrial deposits, researchers have focused on the development of adsorbents to extract radioactive uranium from seawater/wastewater. However, the artificial manipulation of adsorbents for the cost-effective extraction of radioactive uranium from large numbers of water samples is still significantly challenging. Herein, a facile yet versatile stepwise strategy has been reported for the fabrication of adsorbents. Magnesium hydroxide (Mg(OH)2) was fabricated via the in situ conversion of a natural ore powder (magnesite), whose unique internal pore structure is highly suitable for the development of highly efficient sorbents. The coordination interaction of the synthesized adsorbent with uranium was enhanced by further introducing inexpensive molecules with water-locking properties, which resulted in superior extraction capacity and low production cost. After careful calculation, the cost per kilogram of the adsorbent was found to be about $0.21. The adsorption behaviors of the synthesized adsorbent CMC-PAM/Mg(OH)2 were investigated by batch adsorption, flow-through column adsorption (in laboratory), and field adsorption experiments in natural seawater and river. Representatively, CMC-PAM/Mg(OH)2 was exceptional in extracting uranium not only at high concentrations with sufficient capacities in a wide pH range (1584.67 mg g-1 and 454.55 mg g-1 at pH = 5 and pH = 8, respectively), but also in trace quantities including uranium in a flow-through column (55.68 mg g-1), natural seawater (8.6 mg g-1), and river (6.7 mg g-1). Inspired by this excellent performance, the effects of competitive ions on the selective adsorption of uranium by CMC-PAM/Mg(OH)2 in simulated wastewater and seawater environments were further studied. Using a combination of FTIR spectroscopic and XPS studies, it was revealed that the amine and hydroxyl groups enhanced the overall uranyl affinity of the CMC-PAM/Mg(OH)2 composite.

Tailored Porous Organic Polymers for Task-Specific Water Purification

The Industrial Revolution has resulted in social and economic improvements, but unfortunately, with the development of manufacturing and mining, water sources have been pervaded with contaminants, putting Earth's freshwater supply in peril. Therefore, the segregation of pollutants-such as radionuclides, heavy metals, and oil spills-from water streams, has become a pertinent problem. Attempts have been made to extract these pollutants through chemical precipitation, sorbents, and membranes. The limitations of the current remediation methods, including the generation of a considerable volume of chemical sludge as well as low uptake capacity and/or selectivity, actuate the need for materials innovation. These insufficiencies have provoked our interest in the exploration of porous organic polymers (POPs) for water treatment. This category of porous material has been at the forefront of materials research due to its modular nature, i.e., its tunable functionality and tailorable porosity. Compared to other materials, the practicality of POPs comes from their purely organic composition, which lends to their stability and ease of synthesis. The potential of using POPs as a design platform for solid extractors is closely associated with the ease with which their pore space can be functionalized with high densities of strong adsorption sites, resulting in a material that retains its robustness while providing specified interactions depending on the contaminant of choice.POPs raise opportunities to improve current or enable new technologies to achieve safer water. In this Account, we describe some of our efforts toward the exploitation of the unique properties of POPs for improving water purification by answering key questions and proposing research opportunities. The design strategies and principles involved for functionalizing POPs include the following: increasing the density and flexibility of the chelator to enhance their cooperation, introducing the secondary sphere modifiers to reinforce the primary binding, and enforcing the orientation of the ligands in the pore channel to increase the accessibility and cooperation of the functionalities. For each strategy, we first describe its chemical basis, followed by presenting examples that convey the underlying concepts, giving rise to functional materials that are beyond the traditional ones, as demonstrated by radionuclide sequestration, heavy metal decontamination, and oil-spill cleanup. Our endeavors to explore the applicability of POPs to deal with these high-priority contaminants are expected to impact personal consumer water purifiers, industrial wastewater management systems, and nuclear waste management. In our view, more exciting will be new applications and new examples of the functionalization strategies made by creatively merging the strategies mentioned above, enabling increasingly selective binding and efficiency and ultimately promoting POPs for practical applications to enhance water security.

Anti-Biofouling and Water-Stable Balanced Charged Metal Organic Framework-Based Polyelectrolyte Hydrogels for Extracting Uranium from Seawater

Metal-organic frameworks (MOFs) are diffusely defined as a promising class of porous material for uranium extraction from seawater, but there are still challenges in their stability and anti-biofouling performance. Herein, a water-stable and anti-biofouling ZIF-67/SAP_0.45 composite hydrogel was reported by the sequential processes of electrostatic interactions between the oppositely charged polymer, ionic gelation, and template growth of ZIF-67 crystals. Entanglement of positively charged polyethyleneimine (PEI) and negatively charged sodium alginate (SA) polymer chains provided external porosities, anti-biofouling properties, and mechanical support for the hydrogels and further reduced the possibility of ZIF-67 aggregation. The neutral composite hydrogel possessed the least Nitzschia on the surface after 7 days contact, which endows the adsorbent with a high uranium uptake capacity of 2107.87 ± 41.64 μg g^-1 at 1 mg L^-1 uranium-containing seawater with 8.6 × 10⁵ mL^-1 Nitzschia. Additionally, this adsorbent showed water stability with an uranium uptake capacity of 232.88 ± 8.02 mg g^-1 even after five adsorption-desorption cycles because of the excellent preparation method. Benefitting from the distinctive hierarchical structure and large accessible surface area, the resultant adsorbent achieved a high uranium capacity of 6.99 ± 0.26 mg g^-1 in real seawater. This flexible and scalable approach made the MOF/SAP composite hydrogel a highly desirable uranium adsorbent.

Constructing amidoxime-modified porous adsorbents with open architecture for cost-effective and efficient uranium extraction

The dense structure of polymeric matrices exposes only 10–20% of adsorption (amidoxime) groups, thus detracting from the extraction efficiency of uranium from seawater. Herein, the amidoxime-modified building units were cross-linked via the Scholl reaction into porous aromatic frameworks (PAFs). Due to the formation of open architecture, PAF adsorbents reveal a larger utilization ratio (>60%) of amidoxime groups. Consequently, PAF samples enable an ultrahigh uranium capacity of 702 mg g⁻¹, which creates a 16-fold capacity enhancement and gains a 7-fold adsorption rate improvement compared with polymer-based adsorbents. Notably, PAF solids are able to be integrated into various devices, thus realizing versatile and efficacious uranium extraction from real seawater (meeting the commercial standard ∼6 mg g⁻¹ in 21 days). In addition, the final cost using our PAF-based adsorbent is US $189.77 per kg uranium, it is in accordance with the prevailing market cost ($100–335 per kg).

The dense structure of polymeric matrices exposes only 10–20% of adsorption (amidoxime) groups, thus detracting from the extraction efficiency of uranium from seawater.

Aryl Diazonium-Assisted Amidoximation of MXene for Boosting Water Stability and Uranyl Sequestration via Electrochemical Sorption

Despite that two-dimensional transition metal carbides and carbonitrides (MXenes) are burgeoning candidates for remediation of environmental pollutants, the construction of robust functionalized MXene nanosheets with a high affinity for target heavy metal ions and radionuclides remains a challenge. Here we report the successful placement of amidoxime chelating groups on Ti₃C₂T_x MXene surface by diazonium salt grafting. The introduction of amidoxime functional groups significantly enhances the selectivity of Ti₃C₂T_x nanosheets for uranyl ions and also greatly improves their stability in aqueous solution, enabling efficient, rapid, and recyclable uranium extraction from aqueous solutions containing competitive metal ions. Benefiting from the excellent conductivity of MXenes, the amidoxime functionalized Ti₃C₂T_x nanosheets show outstanding electrochemical performance such that when loaded on carbon cloth the application of an electric field increases the uranium adsorption capacity from 294 to 626 mg/g, outperforming all organic electrochemical sorption materials reported previously. The present work provides an effective strategy to functionalize MXene nanosheets with fundamental implications for the design of MXene-based selective electrosorption electrode materials.

Positively charged conjugated microporous polymers with antibiofouling activity for ultrafast and highly selective uranium extraction from seawater

Uranium high-efficiency separation from seawater still has some obstacles such as slow sorption rate, poor selectivity and biofouling. Herein, we report a strategy for ultrafast and highly selective uranium extraction from seawater by positively charged conjugated microporous polymers (CMPs). The polymers are synthesized by Sonogashira-Hagihara cross-coupling reaction of 1,3-dibromo-5,5-dimethylhydantoin and 1,3,5-triethynylbenzene, and then modified with oxime and carboxyl via click reaction. The CMPs show an ultrafast sorption (0.46 mg g^-1 day^-1) for uranium, and possess an outstanding selectivity with a high sorption capacity ratio of U/V (8.4) in real seawater. The study of adsorption process and mechanism indicate that the CMPs skeleton exhibits high affinity for uranium and can accelerate the sorption, and uranium(VI) is adsorbed on the materials by the interaction of oxime/carboxyl ligands and hydantoin. Moreover, the material can be simply loaded onto the filter membrane, and shows remarkable antibiofouling properties against E. coli and S. aureus and excellent uptake capacity for uranium with low concentration in real seawater. This work may provide a promising approach to design adsorbents with fast adsorption rate, high selectivity and antibacterial activity, and expand the thinking over the development of novel and highly efficient adsorbents for uranium extraction from seawater.

Rational Construction of Porous Metal-Organic Frameworks for Uranium(VI) Extraction: The Strong Periodic Tendency with a Metal Node

Although metal-organic frameworks (MOFs) have been reported as important porous materials for the potential utility in metal ion separation, coordinating the functionality, structure, and component of MOFs remains a great challenge. Herein, a series of anionic rare earth MOFs (RE-MOFs) were synthesized via a solvothermal template reaction and for the first time explored for uranium(VI) capture from an acidic medium. The unusually high extraction capacity of UO₂²⁺ (e.g., 538 mg U per g of Y-MOF) was achieved through ion-exchange with the concomitant release of Me₂NH₂⁺, during which the uranium(VI) extraction in the series of isostructural RE-MOFs was found to be highly sensitive to the ionic radii of the metal nodes. That is, the uranium(VI) adsorption capacities continuously increased as the ionic radii decreased. In-depth mechanism insight was obtained from molecular dynamics simulations, suggesting that both the accessible pore volume of the MOFs and hydrogen-bonding interactions contribute to the strong periodic tendency of uranium(VI) extraction.

Bio-inspired antibacterial cellulose paper-poly(amidoxime) composite hydrogel for highly efficient uranium(vi) capture from seawater

A bio-inspired cellulose paper-poly(amidoxime) composite hydrogel is explored via UV-polymerization. This hydrogel has a highly efficient uranium capture capacity of up to 6.21 mg g^-1 for W_U/W_dry gel and 12.9 mg g^-1 for W_U/W_{poly(amidoxime)} in seawater for 6 weeks, due to its enhanced hydrophilicity, good hydraulic/ionic conductivity and broad-spectrum antibacterial performance.

An Ion-Crosslinked Supramolecular Hydrogel for Ultrahigh and Fast Uranium Recovery from Seawater

Large-scale uranium extraction from seawater is a crucial but challenging part of nuclear power generation. In this study, a new ion-crosslinked supramolecular Zn²⁺ -poly(amidoxime) (PAO) hydrogel that can super-efficiently adsorb uranium from seawater is explored. By simply mixing two solutions of zinc chloride and PAO, a supramolecular Zn²⁺ -PAO hydrogel is achieved via the interaction between zinc cations and amidoxime anions. In contrast with existing amidoxime-functionalized hydrogel-based adsorbents having low PAO contents and fiber-based adsorbents with weak hydrophilicity, the PAOs can be directly crosslinked using a small quantity of superhydrophilic zinc ion. Thus, a supramolecular hydrogel is formed, having both a high content of well-dispersed PAOs and good hydrophilicity. Relative to reported adsorbents, this low-cost hydrogel membrane exhibits outstanding uranium adsorption performance, reaching 1188 mg g^-1 of M_U /M_{dry gel} in 32 ppm uranium-spiked water. More importantly, after immersion in natural seawater for only 4 weeks, the uranium extraction capacity of the Zn²⁺ -PAO hydrogel membrane reaches 9.23 mg g^-1 of M_U /M_{dry gel} . This work can provide a general strategy for designing a new type of supramolecular hydrogel, crosslinked by various bivalent/multivalent cation-crosslinkers and even many other superhydrophilic supramolecular crosslinkers, for the high-efficient and massive extraction of uranium from seawater.

A Comparison of Two Isoreticular Metal-Organic Frameworks with Cationic and Neutral Skeletons: Stability, Mechanism, and Catalytic Activity

Although many ionic metal-organic frameworks (MOFs) have been reported, little is known about how the charge of the skeleton affects the properties of the MOF materials. Herein we report how the chemical stability of MOFs can be substantially improved through embedding electrostatic interactions in structure. A MOF with a cationic skeleton is impervious to extremely acidic, oxidative, reductive, and high ionic strength conditions, such as 12 m HCl (301 days), aqua regia (86 days), H₂ O₂ (30 days), and seawater (30 days), which is unprecedented for MOFs. DFT calculations suggested that steric hinderance and the repulsive interaction of the cationic framework toward positively charged species in microenvironments protects the vulnerable bonds in the structure. Diverse functionalities can be bestowed by substituting the counterions of the charged framework with identically charged functional species, which broadens the horizon in the design of MOFs adaptable to a demanding environment with specific functionalities.

Regenerable and stable sp2 carbon-conjugated covalent organic frameworks for selective detection and extraction of uranium

Uranium is a key element in the nuclear industry, but its unintended leakage has caused health and environmental concerns. Here we report a sp2 carbon-conjugated fluorescent covalent organic framework (COF) named TFPT-BTAN-AO with excellent chemical, thermal and radiation stability is synthesized by integrating triazine-based building blocks with amidoxime-substituted linkers. TFPT-BTAN-AO shows an exceptional UO22+ adsorption capacity of 427 mg g-1 attributable to the abundant selective uranium-binding groups on the highly accessible pore walls of open 1D channels. In addition, it has an ultra-fast response time (2 s) and an ultra-low detection limit of 6.7 nM UO22+ suitable for on-site and real-time monitoring of UO22+, allowing not only extraction but also monitoring the quality of the extracted water. This study demonstrates great potential of fluorescent COFs for radionuclide detection and extraction. By rational designing target ligands, this strategy can be extended to the detection and extraction of other contaminants.

Skeleton Engineering of Homocoupled Conjugated Microporous Polymers for Highly Efficient Uranium Capture via Synergistic Coordination

Developing efficient adsorbents for uranium enrichment is of great significance for resource sustainability and environmental safety. This study presents a facile and adaptable post-synthetic strategy to prepare highly efficient uranium adsorbents via engineering the π-conjugated skeletons of homocoupled conjugated microporous polymers (HCMPs). Taking advantage of the diyne units in the π-conjugated skeletons, bis-amidoxime uranophiles, one of the state-of-the-art ligands of uranyl ions, were introduced to the frameworks of HCMPs. The functionalized HCMPs preserved the interconnected 3D microporous networks and rigid conjugated skeletons with abundant bis-amidoxime ligands uniformly distributed in the pore channels. Such structural advantages of the adsorbents afforded very fast adsorption kinetics within 15 min to reach the equilibrium and high capacity of uranium (450 mg/g). Moreover, DFT calculation suggests a synergistic coordination as the most energetically favored coordination mode of the uranyl/bis-amidoxime complexes. This study contributes new insights into the underlying mechanism responsible for the highly efficient adsorption ability of the bis-amidoxime-functionalized HCMPs toward uranium. Meanwhile, the synthetic methodology established here could be extended to task-specific design and skeleton engineering of more functional HCMPs for broadened applications.

Evaluation of an Imidazolium-Based Porous Organic Polymer as Radioactive Waste Scavenger

⁹⁹TcO₄^- is highly radioactive and hazardous to both the environment and public health, meanwhile, it is quite challenging to have it efficiently removed. Herein an imidazolium-based cationic porous polymer (ImPOP-1) is evaluated for removal of TcO₄^-, with nonradioactive ReO₄^- as the surrogate for experimental operation. It is demonstrated that ImPOP-1 is a rare example that can integrate high adsorption capacity (610 mg g^-1), fast kinetics (93.3% in 30 s), and high selectivity (72.9% in 1000 times excess of SO₄^2- ions) in one material. The distribution coefficient K_d is among the top up to 3.2 × 10⁵ mL g^-1. ImPOP-1 also displays high adsorption performance over a wide range of pH values, and removal efficiency up to 64.3% in a highly alkaline solution (3 M NaOH). Recyclability experiments demonstrate that ImPOP-1 can be reused at least four times. The ImPOP-1 also retains a consistent adsorption capacity up to 609 ± 6.1 mg g^-1 between three different batches of samples. In addition, a real-scenario experiment shows that ImPOP-1 can remove 97.4% of ReO₄^- in a simulated Hanford LAW stream.

Effective removal of uranium from aqueous solution by using novel sustainable porous Al2O3 materials derived from different precursors of aluminum

Novel porous Al₂O₃ materials with high adsorption capacity for U(vi) were prepared via solution-freeze-drying-calcination technology.

Exploration of advanced porous organic polymers as a platform for biomimetic catalysis and molecular recognition

This Feature article summarizes our progress in the design of biomimetic POPs for catalysis and molecular recognition with enhanced performance.