Silica nanoparticle stability in biological media revisited

The stability of silica nanostructure in the core-silica shell nanomaterials is critical to understanding the activity of these nanomaterials since the exposure of core materials due to the poor stability of silica may cause misinterpretation of experiments, but unfortunately reports on the stability of silica have been inconsistent. Here, we show that luminescent silver nanodots (AgNDs) can be used to monitor the stability of silica nanostructures. Though relatively stable in water and phosphate buffered saline, silica nanoparticles are eroded by biological media, leading to the exposure of AgNDs from AgND@SiO₂ nanoparticles and the quenching of nanodot luminescence. Our results reveal that a synergistic effect of organic compounds, particularly the amino groups, accelerates the erosion. Our work indicates that silica nanostructures are vulnerable to cellular medium and it may be possible to tune the release of drug molecules from silica-based drug delivery vehicles through controlled erosion.

Coupling free energy and surface anchoring mechanism in gold nanorod–nematic liquid crystal dispersions

Dependence of both the induced optical birefringence signals and simulated free energy f_total with the pump H.

Supramolecular gelatons: towards the design of molecular gels

The concept of supramolecular gelatons for the design of gels was proposed and described.

Organoclays with carbosilane dendrimers containing ammonium or phosphonium groups

New composite materials could reveal attractive capabilities and favourable properties.

Reversible strain alignment and reshuffling of nanoplatelet stacks confined in a lamellar block copolymer matrix

We designed a nanocomposite consisting of CdSe nanoplatelets dispersed in the form of short stacks in the polybutadiene domains of a polystyrene-polybutadiene-polystyrene (SBS) thermoplastic elastomer matrix. Under strain, the material displays reversible, macroscopic anisotropic properties, e.g. the fluorescence signal. We present here a structural study of the composite under stretching, by in situ high-resolution X-ray scattering using synchrotron radiation. Modelling the scattering signal allows us to monitor the evolution of both the matrix and the platelets under strain. In particular, we show that the strain "reshuffles" the platelet stacks, which tilt their long axis from parallel to the plane of the microstructure lamellae at rest to perpendicular to this plane at high strain, at the same time breaking into smaller pieces, more easily accommodated in the soft butadiene domains. This reshuffling is fully reversed after strain relaxation. Moreover, it can be prevented by adding free oleic acid, which reinforces the interactions between the platelets in the stacks.

Diversifying Nanoparticle Assemblies in Supramolecule Nanocomposites Via Cylindrical Confinement

Many macroscopic properties such as collective chiral responses enhanced by coupled plasmonic nanoparticles require complex nanostructures. However, a key challenge is to directly assemble nanosized building blocks into functional entities with designed morphologies. For example, the DNA templated nanoparticle assembly has low scalability and requires aqueous conditions, while other approaches such as controlled drying and polymer templating access only simple 1-D, 2-D, and 3-D structures with limited assembly patterns. Here, we demonstrate a new self-assembly strategy that expands the diversity of 3-D nanoparticle assemblies. By subjecting supramolecular nanocomposites to cylindrical confinement, a range of new nanoparticle assemblies such as stacked rings and single and double helices can be readily obtained with a precisely defined morphology. Circular dichroism dark field scattering measurements on the single nanowire with Au helical ribbon-like assembly show chiral plasmonic response several orders of magnitude higher than that of natural chiral materials. The phase behavior of supramolecular nanocomposite under geometric constraints is quite different from that of block copolymer. It depends on the complex interplay among nanoparticle packing and phase behavior of parent block copolymers under confinement and can be governed by nanoparticle diffusion.

Functional Microcapsules with Hybrid Shells Made via Sol-Gel Reaction within Double Emulsions

Microcapsules with organic-inorganic hybrid shells can be used as functionally responsive delivery systems that are attractive for a broad range of applications. Hybrid-shell microcapsules have often been synthesized by the assembly of solid inorganic nanoparticles and polymers. Efforts to extend this approach to microfluidic emulsification have been hampered by problems with clogging and flow instabilities when utilizing dispersions of solid particles. In this work, hybrid shell microcapsules are synthesized through the reaction of liquid precursors, eliminating the use of solid dispersions. Our microfluidic water-oil-water emulsification technique also enables the preparation of hybrid-shell microcapsules with thicker and more robust shells compared to alternative techniques. By utilizing bridged-silane precursors to form the hybrid material, we demonstrate hybrid-shell microcapsules with independently tunable functional and mechanical/barrier properties. This independent tuning of physical and functional properties allows for the production of functional organic-inorganic hybrid shell microcapsules that can be tailored to meet the demands of a wide range of applications.

Functionalized self-assembly of colloidal CdX (X = S, Se) nanorods on solid substrates for device applications

In comparison to randomly oriented nanorods (NRs), self-assembly of the colloidal CdX (X = S, Se) NRs into well-organized large-scale structures results in unique collective properties. Moreover, the anisotropic structural features of self-assemblies preserved from colloidal CdX (X = S, Se) NRs have opened up exciting opportunities in the field of nanotechnology applications. We present the latest strategies for the self-assembly of colloidal NRs on solid substrates, and further focus on the self-assembled NRs for applications in devices. Advanced progress in the preparation of NR building blocks on the basis of nanofabrication techniques and comprehensive studies on the interactions of NRs with substrates will remarkably expand the application of colloidal semiconductor NRs. Understanding and mastering the driving forces behind the assembly of the NRs is the key goal of engineering future functional structures based on NRs.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Performing Logical Operations with Stimuli-Responsive Building Blocks

Chemical logic gates can be fabricated by synthesizing molecules that have the ability to detect external stimuli (e.g., temperature or pH) and provide logical outputs. It is, however, challenging to fabricate a system that consists of many logic gates using this method: complex molecules can be difficult to synthesize and these logic gates typically cannot be integrated together. Here, we fabricated different types of logic gates by assembling a combination of different types of stimuli-responsive hydrogels that change their size under the influence of one type of stimulus. Importantly, the preparation of these stimuli-responsive hydrogels is widely reported and technically simple. Through designing the geometry of the systems, we fabricated the YES, NOT, OR, AND, NOR, and NAND gates. Although the hydrogels respond to different types of stimuli, their outputs are the same: a change in size of the hydrogel. Hence, we show that the logic gates can be integrated easily (e.g., by connecting an AND gate to an OR gate). In addition, we fabricated a standalone system with the size of a normal drug tablet (i.e., a "smart tablet") that can analyze (or diagnose) different stimuli and control the release of a chemical (or drug) via the logic gates.

Nanoparticle-Programmed Surface for Drug Release and Cell Regulation via Reversible Hybridization Reaction

A surface directly connects the bulk of a material to its surroundings. The ability to dynamically regulate the surface without affecting the bulk of a material holds great potential for new applications. The purpose of this work was to demonstrate that the surface can be dynamically changed using nanoparticles and oligonucleotides (ODNs) in a reversible and reiterative manner. A dual-functional nanogel was synthesized as the model of nanoparticles using miniemulsion polymerization and click chemistry. The nanogel can not only adsorb drugs for sustained drug release but also bind a surface functionalized with complementary ODNs. Importantly, hybridization reaction and ODN degradation can drive reversible and reiterative nanogel binding to the surface for dynamic change, which in principle is unlimited. Moreover, nanogel-mediated dynamic change offers the surface with the drug-releasing function for inhibiting the growth of surrounding cells. Because nanogels can be replaced by any functional nanoparticles with a diverse array of properties, nanoparticle-programmed surface change constitutes a promising platform for various applications such as drug delivery and stent implantation.

Janus nanoparticles inside polymeric materials: interfacial arrangement toward functional hybrid materials

Recent advances and successes in interfacial behavior of Janus NPs at interfaces are summarized, with the hope to motivate additional efforts in the studies of Janus NPs in polymer matrix for the design of functional hybrid nanostructures and devices with engineered, desired and tailored properties for real-life applications.

End-to-end assembly and disassembly of gold nanorods based on photo-responsive host–guest interaction

The end-to-end assembly and disassembly of gold nanorods were realized via HS-β-CD recognition and controllable by both UV light irradiation and guest competition.

Ligand displacement induced morphologies in block copolymer/quantum dot hybrids and formation of core–shell hybrid nanoobjects

This article reports on the ligand displacement induced morphologies in block copolymer/quantum dot hybrids and further formation of core–shell nano-objects from them.

Nickel nanoparticles-chitosan composite coated cellulose filter paper: An efficient and easily recoverable dip-catalyst for pollutants degradation

In this report, we used cellulose filter paper (FP) as high surface area catalyst supporting green substrate for the synthesis of nickel (Ni) nanoparticles in thin chitosan (CS) coating layer and their easy separation was demonstrated for next use. In this work, FP was coated with a 1 wt% CS solution onto cellulose FP to prepare CS-FP as an economical and environment friendly host material. CS-FP was put into 0.2 M NiCl₂ aqueous solution for the adsorption of Ni²⁺ ions by CS coating layer. The Ni²⁺ adsorbed CS-FP was treated with 0.1 M NaBH₄ aqueous solution to convert the ions into nanoparticles. Thus, we achieved Ni nanoparticles-CS composite through water based in-situ preparation process. Successful Ni nanoparticles formations was assessed by FESEM and EDX analyses. FTIR used to track the interactions between nanoparticles and host material. Furthermore, we demonstrated that the nanocomposite displays an excellent catalytic activity and reusability in three reduction reactions of toxic compounds i.e. conversion of 4-nitrophenol to 4-aminophenol, 2-nitrophenol to 2-aminophenol, and methyl orange dye reduction by NaBH₄. Such a fabrication process of Ni/CS-FP may be applicable for the immobilization of other metal nanoparticles onto FP for various applications in catalysis, sensing, and environmental sciences.

Assembly of Branched Colloidal Nanocrystals in Polymer Films Leads to Enhanced Viscous Deformation Resistance

Progress in the integration of nanocrystals with polymers has enabled the creation of materials for applications ranging from photovoltaics to biosensing. However, controlling the nanocrystal segregation and aggregation in the polymer phase remains a challenging task, especially because nanocrystals tend to form amorphous clusters inside the polymer matrix. Here, we present the ability of octapod-shaped particles to overcome their strong entropy-driven tendency to aggregate disorderly and form instead centipede-like linear arrays that are randomly oriented and fully embedded in polystyrene films upon controlled solvent evaporation. This behavior cannot be entirely described by short-range van der Waals interactions between the octapods in the polymer solution. An important role here is played by the increment of the viscosity of the medium during the evaporation of the solvent, which prevents disaggregation of the chains once they are formed. We show that increasing the octapod loading in the blends does not impact the length of the linear arrays beyond a critical length, while it favors instead chain demixing to form self-segregated regions of parallel interlocked chains. Our experiments evidence that softening of the polymer matrix by ex situ heating of the films induces a tail-to-tail coupling of the preformed chains and leads to the formation of longer linear structures of octapods, up to 2 μm long. The presence of 1D arrays of octapods in free-standing polystyrene films improves the creep response by a remarkable 37%, owing to an octapod pinning effect of the polymer matrix.

Design and Cellular Fate of Bioinspired Au-Ag Nanoshells@Hybrid Silica Nanoparticles

Silica-coated gold-silver alloy nanoshells were obtained via a bioinspired approach using gelatin and poly-l-lysine (PLL) as biotemplates for the interfacial condensation of sodium silicate solutions. X-ray photoelectron spectroscopy was used as an efficient tool for the in-depth and complete characterization of the chemical features of nanoparticles during the whole synthetic process. Cytotoxicity assays using HaCaT cells evidenced the detrimental effect of the gelatin nanocoating and significant induction of late apoptosis after silicification. In contrast, PLL-modified nanoparticles had less biological impact that was further improved by the silica layer, and uptake rates of up to 50% of those of the initial particles could be achieved. These results are discussed considering the effect of nanosurface confinement of the biopolymers on their chemical and biological reactivity.

Facile synthesis of hierarchical Mn3O4 superstructures and efficient catalytic performance

The development of novel materials with excellent performance depends not only on the constituents but also on their remarkable micro/nanostructures. In this work, manganese oxide (Mn₃O₄) hausmannite structures with a uniform three-dimensional (3D) flower-like hierarchical architecture have been successfully synthesized by a novel chemical route using surfactants as structure-directing agents. Microstructure analysis indicates that the obtained 3D flower-like Mn₃O₄ superstructure consists of a large number of two-dimensional (2D) Mn₃O₄ nanosheets, which is different from the reported 3D Mn₃O₄ hierarchical structures based on zero-dimensional nanoparticles or one-dimensional nanowires and nanorods. This 3D Mn₃O₄ hierarchical architecture provides us with another type of manganese oxide with different superstructural characteristics, which may have potential practical applications in the catalytic degradation of organic pollutants. The catalytic performance of this hierarchical Mn₃O₄ superstructure, which was prepared by three different types of structure-directing agents, including cetyltrimethylammonium bromide (CTAB), poly(vinylpyrrolidone) (PVP), and poly(ethylene oxide)-poly(propylene oxide) (P123), was evaluated for the catalytic degradation of organic pollutants, e.g. methylene blue. Interestingly, the hierarchical Mn₃O₄ superstructure prepared using CTAB as a template showed efficient catalytic degradation. The formation processes and possible growth mechanism of this novel 3D Mn₃O₄ hierarchical superstructure assembled by 2D Mn₃O₄ nanosheets are discussed in detail.

Protein-directed assembly of cobalt phosphate hybrid nanoflowers

The understanding and controlling of biomimetic hybrid materials are a key objective in bio-nanotechnology, materials chemistry, and colloid science fields. Biomaterials, such as, enzyme, DNA, RNA, and proteins have become important templates for the construction of inorganic-organic hybrid nanoflowers. From this perspective, we present a simple approach to synthesize protein and metal hybrid flower-like structure using bovine serum albumin (BSA) and cobalt phosphate, and the results of our study on the formation mechanism involved. The time dependent growing stage and formation mechanism were analyzed by electron microscopes and spectroscopic techniques. The protein-directed assembly method for preparation of hybrid nanoflowers described in this work could be used to fabricate other bio-metal hybrid materials with possible applications in biosensors, bioanalytical devices, and industrial biocatalyst fields.

Monte Carlo Study of Degenerate Behavior of AB Diblock Copolymer/Nanoparticle under Cylindrical Confinement

Degenerate behavior (i.e., forming different self-assembled structures for a given block copolymer (BCP) under the same confinement) commonly exists in various confined systems. Understanding degenerate behavior is crucial for precise control over the structures formed by self-assembly systems under confinement. In this study, the degenerate behavior of a self-assembled AB diblock copolymer/nanoparticle (NP) mixture in a cylindrical pore is studied using Monte Carlo simulation. We find that the degenerate behavior of such a mixture depends on the introduction of the NP. Under different pore sizes, four typical degenerate structures [i.e., single helices (S-helices), double helices (D-helices), parallel cylinders, and stacked toroids] can be obtained if the NP content is zero. However, when the NP content in the mixture is increased, it is found that the number of degenerate structures decreases, that is, only blocky structures can be obtained in the case of high NP content. Moreover, the probability of forming S-helices decreases, whereas the probability of forming D-helices increases with increase in the NP content. Analysis of the interactive enthalpy densities and the chain conformation of the systems indicates that entropy plays an important role in the degenerate structure formation. This study provides some new insights into the degenerate behavior of a BCP/NP mixture under confinement, which can offer a theoretical reference for further experiments.

Strategies for Inorganic Incorporation using Neat Block Copolymer Thin Films for Etch Mask Function and Nanotechnological Application

Block copolymers (BCPs) and their directed self-assembly (DSA) has emerged as a realizable complementary tool to aid optical patterning of device elements for future integrated circuit advancements. Methods to enhance BCP etch contrast for DSA application and further potential applications of inorganic nanomaterial features (e.g., semiconductor, dielectric, metal and metal oxide) are examined. Strategies to modify, infiltrate and controllably deposit inorganic materials by utilizing neat self-assembled BCP thin films open a rich design space to fabricate functional features in the nanoscale regime. An understanding and overview on innovative ways for the selective inclusion/infiltration or deposition of inorganic moieties in microphase separated BCP nanopatterns is provided. Early initial inclusion methods in the field and exciting contemporary reports to further augment etch contrast in BCPs for pattern transfer application are described. Specifically, the use of evaporation and sputtering methods, atomic layer deposition, sequential infiltration synthesis, metal-salt inclusion and aqueous metal reduction methodologies forming isolated nanofeatures are highlighted in di-BCP systems. Functionalities and newly reported uses for electronic and non-electronic technologies based on the inherent properties of incorporated inorganic nanostructures using di-BCP templates are highlighted. We outline the potential for extension of incorporation methods to triblock copolymer features for more diverse applications. Challenges and emerging areas of interest for inorganic infiltration of BCPs are also discussed.

Highly grafted polystyrene/polyvinylpyridine polymer gold nanoparticles in a good solvent: effects of chain length and composition

In this work, the structural features of spherical gold nanoparticles (NPs) decorated with highly grafted poly(styrene) (PS), poly(vinylpyridine) (PVP) and PS-PVP diblock copolymer brushes immersed in a good solvent are investigated by means of Dissipative Particle Dynamics (DPD) simulations as a function of grafted chain length and of homopolymer and copolymer chain composition. For NPs grafted either by PS or PVP homopolymer brushes (selected as a proof of concept), good agreement between the Daoud-Cotton theory, experimental evidence, and our DPD simulations is observed in the scaling behavior of single chain properties, especially for longer grafted chains, and in brush thickness prediction. On the other hand, for grafted chain lengths comparable to NP dimensions parabolic-like profiles of the end-monomer distributions are obtained. Furthermore, a region of high concentration of polymer segments is observed in the monomer density distribution for long homopolymers. In the case of copolymer-decorated NPs, the repulsion between PS and PVP blocks is found to substantially influence the radius of gyration and the shape of the end-monomer distribution of the relevant polymer shell. Moreover, for diblock chains, the un-swollen region is observed to be thinner (and, correspondingly, the swollen layer thicker) than that of a NP modified with a homopolymer of the same length. Finally, the lateral segregation of PS and PVP blocks is evidenced by our calculations and a detailed analysis of the corona behavior is reported, thus revealing the key parameters in controlling the surface properties and the response of diblock copolymer modified nanoparticles.

Small Angle X-ray Scattering for Nanoparticle Research

X-ray scattering is a structural characterization tool that has impacted diverse fields of study. It is unique in its ability to examine materials in real time and under realistic sample environments, enabling researchers to understand morphology at nanometer and angstrom length scales using complementary small and wide angle X-ray scattering (SAXS, WAXS), respectively. Herein, we focus on the use of SAXS to examine nanoscale particulate systems. We provide a theoretical foundation for X-ray scattering, considering both form factor and structure factor, as well as the use of correlation functions, which may be used to determine a particle's size, size distribution, shape, and organization into hierarchical structures. The theory is expanded upon with contemporary use cases. Both transmission and reflection (grazing incidence) geometries are addressed, as well as the combination of SAXS with other X-ray and non-X-ray characterization tools. We conclude with an examination of several key areas of research where X-ray scattering has played a pivotal role, including in situ nanoparticle synthesis, nanoparticle assembly, and operando studies of catalysts and energy storage materials. Throughout this review we highlight the unique capabilities of X-ray scattering for structural characterization of materials in their native environment.

Magnetic nanoparticle film reconstruction modulated by immersion within DMSA aqueous solution

The process of reconstruction of pre-fabricated films comprising maghemite nanoparticles deposited onto flat glass substrates triggered by immersion into aqueous solutions of meso-2,3-dimercaptosuccinic acid (DMSA) at increasing concentration (0.025, 0.050, and 0.100 mol/L) is herein reported. The evolution of this process was assessed by measuring the time (t) dependence of the particle analysis histogram width (W) extracted from atomic force microscopy images. Furthermore, a physical picture to model the film reconstruction which provides reconstruction time constants associated to single particles (τ1) and small agglomerates (τn), the key units associated to the process, ranging from τ1 = 2.9 and τn = 3.4 hour (0.025 mol/L) to τ1 = 5.1 and τn = 4.6 hour (0.100 mol/L) is proposed. The nanoparticle-based film reconstruction triggered by an exogenous stimulus, the use of the W versus t data to describe the process and the model picture accounting for the recorded data have not been previously reported.

Nanomanufacturing: A Perspective

Nanomanufacturing, the commercially scalable and economically sustainable mass production of nanoscale materials and devices, represents the tangible outcome of the nanotechnology revolution. In contrast to those used in nanofabrication for research purposes, nanomanufacturing processes must satisfy the additional constraints of cost, throughput, and time to market. Taking silicon integrated circuit manufacturing as a baseline, we consider the factors involved in matching processes with products, examining the characteristics and potential of top-down and bottom-up processes, and their combination. We also discuss how a careful assessment of the way in which function can be made to follow form can enable high-volume manufacturing of nanoscale structures with the desired useful, and exciting, properties.