A Theoretical Study of Solvent Effects on the Structure and UV-vis Spectroscopy of 3-Hydroxyflavone (3-HF) and Some Simplified Molecular Models

Solvent effects on the UV-vis spectra of 3-hydroxyflavone and other structurally related molecules (3-hydroxychromen-4-one, 3-hydroxy-4-pyrone, and 4-pyrone) have been studied by combining time-dependent density functional theory (TDDFT) and the polarizable continuum method (PCM). Among the first five excited states of the four considered molecules, electronic states of n → π* and π → π* nature appear. In general, the stability of the n → π* states decreases as the π space becomes larger in such a way that only for 4-pyrone and 3-hydroxy-4-pyrone are they the first excited states. In addition, they become less stabilized in ethanol solution than the ground state, and this causes blueshift transitions in solution. The opposite trend is found for the π → π* excited states. They are less energetic with the π-system size and when passing from gas phase to solution. The solvent shift also depends strongly on the size of the π systems and on the formation of an intramolecular hydrogen bond; thus, it decreases when going from 4-pyrone to 3-hydroxyflavone. The performance of the three versions (cLR, cLR², and IBSF) of the specific-state PCM method in predicting transition energies are compared.

Reconsideration of the ESIPT off mechanism for fluorescent probe MNC in aqueous solution

Fluorescent probes with excited state intramolecular proton transfer (ESIPT) properties play a significant role in the research of life science and material science. Guo et al. designed 3-hydroxy-2-(6-Methoxynaphthalen-2-yl)-4H-chromen-4-one (MNC) as a control to achieve the dual-color fluorescence imaging of lipid droplets and endoplasmic reticulum (ER). They deemed that the ESIPT process would be turned off in ER with high water content [J. Am. Chem. Soc. 2021, 143, 3169-3179]. However, contrary to the conventional ESIPT off case, the enol* state fluorescence intensity that should have been enhanced was severely quenched in water. Here, combined with ultrafast spectrum, steady-state fluorescence spectrum and potential energy surface, the mechanism of ESIPT process of MNC turned off in water is revised. Furthermore, the formation of aggregated states in water is responsible for the quenching of MNC fluorescence. This work is expected to provide broader ideas for the design of hydrophobic fluorescent probes.

ESIPT-based dual-emissive perimidine derivative as a rapid and sensitive sensor for Cu2+ and Al3+: Construction of memory device, 2-to-1 encoder and 1-to-2 decoder

An ESIPT based fluorescent perimidine derivative oPSDAN was developed and characterized by ¹H NMR, ¹³C NMR and mass spectroscopy. The study of the photo-physical properties of the sensor unveiled its selectivity and sensitivity towards Cu²⁺ and Al³⁺ ions. The sensing of ions was accompanied by colorimetric change (for Cu²⁺) as well as emission turn-off response. The binding stoichiometries of sensor oPSDAN with Cu²⁺ ion and Al³⁺ ions were determined to be 2:1 and 1:1, respectively. The binding constants and detection limits for Cu²⁺ and Al³⁺ were calculated from the UV-vis and fluorescence titration profiles as, 7.1 × 10⁴ M^-1, 1.9 × 10⁴ M^-1 and 9.89 nM, 1.5 × 10^-8 M, respectively. The mechanism was established by ¹H NMR as well as mass titrations and was supported by DFT and TD-DFT calculations. The UV-vis and fluorescence spectral results were further utilized for construction of memory device, encoder and decoder. Sensor-oPSDAN was also tested for determining Cu²⁺ ions in drinking water.

Intramolecular dual hydrogen bonded fluorescent "turn-on" probe for Al3+ and HSO4- ions: Applications in real water samples and molecular keypad lock

Dual hydrogen bonded Schiff base containing unsymmetrical double proton transfer sites, one with imine bond (CN) and hydroxyl group (OH), and the other with benzimidazole and hydroxyl groups has been successfully synthesized. Probe 1 displayed intramolecular charge transfer and acts as a potential sensor for Al³⁺ and HSO₄^- ions. Probe 1 displayed two absorption peaks at 325 nm and 340 nm and an emission band at 435 nm upon excitation at 340 nm. Probe 1 behaves as a fluorescence "turn-on" chemosensor for both Al³⁺ and HSO₄^- ions in H₂O-CH₃OH solvent system. The proposed method allows the determination of Al³⁺ and HSO₄^- ions up to 39 nM and 23 nM at emission wavelength 385 nm and 390 nm, respectively. The binding behavior of probe 1 towards these ions is determined by the Job's plot method and ¹H NMR titrations. Probe 1 is used to construct a molecular keypad lock where the absorbance channel can be opened only in the presence of the correct sequence. Further, it is used for the quantitative determination of HSO₄^- ion in different real-field water samples.

Benzothiazole-based novel fluorescence probe sensing 1, 3-diaminopropane

Amines are extensively present in biological systems and are abundantly used in research, industries and agriculture. Systematic detection and quantification of certain amines can help us in food quality control and diagnosis of many diseases. A Schiff base probe HL was designed and successfully synthesized. It was proposed as a sensor for the exclusive detection of 1, 3- diaminopropane through turn-on fluorescence response in a variety of solvents including water. Micromolar limits of detection was achieved in all these solvents. Mechanism of detection was proposed by investigating mass spectrometric and NMR results. These were corroborated with DFT/TD-DFT calculations. Spiking experiments performed in various real water samples revealed the potential of the sensor to be used in day-to-day applications. Paper strip experiments demonstrated the suitability of the probe for real-life applications.

Analyte-Triggered Excited-State Intramolecular Proton Transfer- Delayed Fluorescence: A General Approach for Time-Resolved Turn-On Fluorescence Imaging

The research of delayed fluorescence (DF) has been a hot topic in biological imaging. However, the development of analyte-triggered small molecule DF probes remains a considerable challenge. Herein a novel excited-state intramolecular proton transfer-delayed fluorescence (ESIPT-DF) approach to construct analyte-stimulated DF probes was reported. These new classes of ESIPT-DF luminophores were strategically designed and synthesized by incorporating 2-(2'-hydroxyphenyl)benzothiazole (HBT), a known ESIPT-based fluorophore, as acceptor with a series of classic donor moieties, which formed a correspondingly twisted donor-acceptor pair within each molecule. Thereinto, HBT-PXZ and HBT-PTZ exhibited significant ESIPT and DF characters with lifetimes of 5.37 and 3.65 μs in the solid state, respectively. Furthermore, a caged probe HBT-PXZ-Ga was developed by introducing a hydrophilic d-galactose group as the recognition unit specific for β-galactosidase (β-gal) and ESIPT-DF blocking agent and applied to investigate the influence of metal ions on β-gal activity on the surface of Streptococcus pneumoniae as a convenient tool. This ESIPT-DF "turn-on" approach is easily adaptable for the measurement of many different analytes using only a predictable modification on the caged group without modification of the core structure.

Photogrammetry of Ultrafast Excited-State Intramolecular Proton Transfer Pathways in the Fungal Pigment Draconin Red

Proton transfer processes of organic molecules are key to charge transport and photoprotection in biological systems. Among them, excited-state intramolecular proton transfer (ESIPT) reactions are characterized by quick and efficient charge transfer within a molecule, resulting in ultrafast proton motions. The ESIPT-facilitated interconversion between two tautomers (PS and PA) comprising the tree fungal pigment Draconin Red in solution was investigated using a combination of targeted femtosecond transient absorption (fs-TA) and excited-state femtosecond stimulated Raman spectroscopy (ES-FSRS) measurements. Transient intensity (population and polarizability) and frequency (structural and cooling) dynamics of -COH rocking and -C=C, -C=O stretching modes following directed stimulation of each tautomer elucidate the excitation-dependent relaxation pathways, particularly the bidirectional ESIPT progression out of the Franck-Condon region to the lower-lying excited state, of the intrinsically heterogeneous chromophore in dichloromethane solvent. A characteristic overall excited-state PS-to-PA transition on the picosecond timescale leads to a unique "W"-shaped excited-state Raman intensity pattern due to dynamic resonance enhancement with the Raman pump-probe pulse pair. The ability to utilize quantum mechanics calculations in conjunction with steady-state electronic absorption and emission spectra to induce disparate excited-state populations in an inhomogeneous mixture of similar tautomers has broad implications for the modeling of potential energy surfaces and delineation of reaction mechanisms in naturally occurring chromophores. Such fundamental insights afforded by in-depth analysis of ultrafast spectroscopic datasets are also beneficial for future development of sustainable materials and optoelectronics.

Tactile Sensors: Hydroxyl Decorated Silver Metal-Organic Frameworks for Detecting Cr2O72-, MnO4-, Humic Acid, and Fe3+ Ions

Anionic, acidic, and metal ions are common contaminants in water and cause serious concerns for human and aquatic life. With the goal of rapid detection of analytes, we herein design a new array of ligand 5-(4H-1,2,4-triazol-4-yl)pyridin-3-ol-linked silver coordinated metal-organic frameworks Ag-MOFs as a promising sensor for Cr₂O₇^2-, MnO₄^-, humic acid (HA), and Fe³⁺ ions down to the micro level. Furthermore, as evidenced by luminescence, excitation-emission matrix (EEM) spectroscopic, and PXRD measurements, designed metal-organic frameworks (MOFs) can be fast, stable, and reusable for analyte detection in water.

Regulating the photophysical properties of ESIPT-based fluorescent probes by functional group substitution: a DFT/TDDFT study

CONTEXT

In recent years, fluorescent probe technology has received more and more attention. However, the photophysical and photochemical properties of probe molecules still need to be further explored. This paper presents the excited state intramolecular proton transfer (ESIPT) processes and photophysical properties of the probe molecule 4-bromo-2-((E)-((Z)-((5-bromo-1H-indol-2-yl) methylene) hydrazono) methyl) phenol (BHPL) and its four derivatives (BHPL2, BHPL3, BHPL4, and BHPL5). Infrared spectra and geometric structure analyses revealed that introducing the -NH₂ group on the benzene ring with the hydroxyl group will enhance the intramolecular hydrogen bond, which benefits the ESIPT process. Combining their absorption and fluorescence spectra, it can be concluded that BHPL2 and BHPL4 are both excellent probe candidates due to their large Stokes shift. The hole and electron and root mean square displacement analyses manifest that the fluorescence quenching of BHPL4 may be due to the intramolecular charge transfer process. Potential energy curves of BHPL and its four derivatives noted that ESIPT process of the BHPL2 is the most favorable to occur. The frontier molecular orbital and NBO analyses indicated that besides introducing electron-donating groups to reduce the energy gap and enhance fluorescence emission, introducing double electron-withdrawing groups can also achieve this effect, explaining why the energy barrier of ESIPT process for BHPL2 is lower than BHPL5. This work would provide the theoretical basis for designing novel fluorescence probes with more prominent properties.

METHODS

The ground (S₀) and excited (S₁) state structures of all compounds were optimized by density functional theory (DFT) and time-dependent (TDDFT) method, with B3LYP/6-311+G(d,p) level, respectively. The infrared spectra and potential energy curves were simulated at the same theoretical level. The reduced density gradient scatter plots and interaction region indicator isosurfaces were drawn using Multiwfn and VMD programs. The absorption and fluorescence spectra were simulated by the TDDFT/B3PW91/6-311+G(d,p) method. All the calculations in this work are carried out in Gaussian 16 program package.

Endoplasmic Reticulum-Targeted Two-Photon Fluorescent Probe for the Detection of Nitroxyl in a Parkinson's Disease Model

Nitroxyl (HNO) and endoplasmic reticulum (ER) stress are considered to play important effects in the administration of many pathological processes of Parkinson's disease (PD). However, the intricate relationship between the neurotoxicity of HNO and ER stress in the processes of PD is still unknown. To completely comprehend the pathogenic activity of HNO during ER stress and achieve early diagnosis of PD, developing sensitive tools for HNO sensing in vivo is essential. In this work, a two-photon fluorescent probe (KD-HNO) was developed with highly selective and sensitive (7.93 nM) response for HNO in vitro. Then, utilizing KD-HNO, we found that HNO levels were distinctly increased in tunicamycin-stimulated PC12 cells, which are characterized by ER stress and PD features. Most importantly, we detected a considerable increase in HNO levels in the brains of PD-model mice, indicating a positive correlation between PD and HNO levels for the first time. Collectively, these findings revealed that KD-HNO is an excellent tool not only for understanding the biological effects of HNO in pathological processes of PD but also for early PD diagnosis.

An ESIPT-based ratiometric fluorescent probe for detecting H2O2 in water environment and biosystems

The outbreak of the COVID-19 has resulted in a great increase in the use of H₂O₂ disinfectant, which is listed as one of the commonly used disinfectants for COVID-19 by the U.S. Environmental Protection Agency. However, excessive use of H₂O₂ disinfectant can threaten human health and damage the water environment. Therefore, it's of great importance to detect H₂O₂ in aquatic environments and biological systems. Herein, we proposed a novel ESIPT ratio fluorescent probe (named probe 1) for detecting H₂O₂ in water environment and biosystems. Probe 1 emits blue fluorescence as the introduction of the phenylboronic acid disrupts the ESIPT process. After reacting with H₂O₂, the phenylboronic acid is oxidatively removed, and the ESIPT process is restored, which makes the fluorescence emission wavelength red-shifted. Probe 1 exhibited a short response time, high sensitivity, and a large Stokes shift to H₂O₂. Importantly, it has been successfully used to detect H₂O₂ not only in actual water samples, but also endogenous and exogenous H₂O₂ in living cells. The characteristics of probe 1 have a wide range of applications in environmental and biological systems.

ESIPT-, AIE-, and AIE + ESIPT-Based Light-Activated Drug Delivery Systems and Bioactive Donors for Targeted Disease Treatment

Targeted release of bioactive molecules for therapeutic purposes is a key area in the biomedical field that is growing quickly, where bioactive molecules are released passively or actively from drug delivery systems (DDSs) or bioactive donors. In the past decade, researchers have identified light as one of the prime stimuli that can implement the efficient spatiotemporally targeted delivery of drugs or gaseous molecules with minimal cytotoxicity and a real-time monitoring ability. This perspective emphasizes recent advances in the photophysical properties of ESIPT- (excited-state intramolecular proton transfer), AIE- (aggregation-induced emission), and AIE + ESIPT-attributed light-activated delivery systems or donors. The three major sections of this perspective describe the distinctive features of DDSs and donors concerning their design, synthesis, photophysical and photochemical properties, and in vitro and in vivo studies demonstrating their relevance as carrier molecules for releasing cancer drugs and gaseous molecules in the biological system.

Surface hopping modeling of charge and energy transfer in active environments

An active environment is any atomic or molecular system changing a chromophore's nonadiabatic dynamics compared to the isolated molecule. The action of the environment on the chromophore occurs by changing the potential energy landscape and triggering new energy and charge flows unavailable in the vacuum. Surface hopping is a mixed quantum-classical approach whose extreme flexibility has made it the primary platform for implementing novel methodologies to investigate the nonadiabatic dynamics of a chromophore in active environments. This Perspective paper surveys the latest developments in the field, focusing on charge and energy transfer processes.

Enlightening the Path to Protein Engineering: Chemoselective Turn-On Probes for High-Throughput Screening of Enzymatic Activity

Many successful stories in enzyme engineering are based on the creation of randomized diversity in large mutant libraries, containing millions to billions of enzyme variants. Methods that enabled their evaluation with high throughput are dominated by spectroscopic techniques due to their high speed and sensitivity. A large proportion of studies relies on fluorogenic substrates that mimic the chemical properties of the target or coupled enzymatic assays with an optical read-out that assesses the desired catalytic efficiency indirectly. The most reliable hits, however, are achieved by screening for conversions of the starting material to the desired product. For this purpose, functional group assays offer a general approach to achieve a fast, optical read-out. They use the chemoselectivity, differences in electronic and steric properties of various functional groups, to reduce the number of false-positive results and the analytical noise stemming from enzymatic background activities. This review summarizes the developments and use of functional group probes for chemoselective derivatizations, with a clear focus on screening for enzymatic activity in protein engineering.

A susceptible coordination hybrid based terbium sensibilization coupled ESIPT effects for pattern discrimination of analogues

Multianalyte detection and analogue discrimination are extremely valuable frontier areas for their wide applications in environmental, medical, clinical and industrial analyses. Nowadays, researchers rack their brains on how to develop excellent multianalyte chemosensors that have presented huge challenges in designing high-efficient fluorescent sensing materials and constructing high-throughput detection methods. In this paper, we propose a novel strategy to utilize the dual-emission fluorescent detection platform as a lab-on-a-molecule, arising from the disalicylaldehyde-coordinated hybrid H₂Q_j3/Tb based terbium sensibilization coupled excited-state intramolecular proton transfer effects. Using the statistical analysis (PCA and HCA) for sensing signals of three fluorescence channels (431, 543 and 583 nm), we demonstrate this elaborate chemosensor with multianalyte detection of three species (solvents, anions and cations) and pattern discrimination of analogues. As a result, the H₂Q_j3/Tb shows great lab-on-a-molecule characters for each set of species, resulting in the easier identification of many critical analytes (e.g., H₂O, NO₂^- and Fe³⁺) and discrimination of analogues. In addition, it is also proven to be able to provide reliable content determination for an analyte, especially the NO₂^- (LOD = 0.37 μM), and discrimination for mixed analogues. A combination of easy-to-implement preparation procedure and data analysis technique makes this work promising for not only designing similar lanthanide-based materials but also realizing more high-efficient multianalyte sensing systems towards various potential applications.

1,6-Naphthyridin-7(6H)-ones: synthesis and optical properties

Efficient synthesis of original 1,6-naphthyridin-7(6H)-ones and their optical properties are described. Their powerful fluorescence properties including dual fluorescence, solvatochromism, acidochromism, large Stokes shifts and high quantum yields, suitable for biological applications or as luminescent devices in materials science, are evidenced.

Precise Manipulation of Excited-State Intramolecular Proton Transfer via Incorporating Charge Transfer toward High-Performance Film-Based Fluorescence Sensing

Excited-state intramolecular proton transfer (ESIPT) has been widely employed for the design of a variety of functionality-led molecular systems. However, precise manipulation of the excited-state reaction is challenging. Herein, we report a new tactic for tuning ESIPT via incorporating an excited-state intramolecular charge transfer (ESICT) process. Specifically, three o-carborane derivatives, NaCBO, PaCBO, and PyCBO, were designed, where the 2-(2'-hydroxyphenyl)-benzothiazole is a typical ESIPT unit functioning as an electron acceptor, and the electron-donating units are naphthyl-(Na), phenanthrenyl-(Pa), and pyrenyl-(Py), respectively. The architectures of the molecules are featured with a face-to-face alignment of the two units. Spectroscopy and theoretical calculation studies revealed that the electron-donating capacity of the donors and solvent polarity continuously modulate the ESIPT/ESICT energetics and dynamics, resulting in distinct emissions. Moreover, the molecules depicted not only highly porous structures but also very different fluorescent colors in the solid state, enabling highly selective film-based fluorescence sensing of mustard gas simulant, 2-chloroethyl ethyl sulfide, with a detection limit of 50 ppb and a response time of 5 s. This work thus provides a reliable strategy for the creation of high-performance sensing fluorophores via ESIPT manipulation.

Discovery of the cysteine dynamics during the development and treatment of diabetic process by fluorescent imaging

Herein, a novel fluorescent probe RhoDCM was developed for monitoring the cysteine (Cys) dynamics. For the first time, the Cys-triggered implement was applied in relatively complete diabetic mice models. The response of RhoDCM towards Cys suggested advantages including practical sensitivity, high selectivity, rapid reaction, and steadiness in various pH and temperature conditions. RhoDCM could basically monitor the intracellular Cys level, both exogenous and endogenous. It could further monitor the glucose level via detecting consumed Cys. Furthermore, the diabetic mice models including the no diabetic control group, the induced model groups by streptozocin (STZ) or alloxan, and the treatment groups induced by STZ and treated with vildagliptin (Vil), dapagliflozin (DA), or metformin (Metf) were constructed. The models were checked by oral glucose tolerance test and significant liver-related serum indexes. Based on the models, the in vivo imaging and penetrating depth fluorescence imaging both indicated that RhoDCM could characterize the status of the development and treatment in the diabetic process via monitoring the Cys dynamics. Consequently, RhoDCM seemed beneficial for inferring the order of severity in the diabetic process and evaluating the potency of therapeutic schedules, which might be informatic for correlated investigations.

ESIPT-based benzazole-pyromellitic diimide derivatives. A thermal, electrochemical, and photochemical investigation

This study describes the synthesis of new pyromellitic diimide (PMDI) derivatives obtained in good yields from the reaction between pyromellitic dianhydride and aminobenzazoles reactive to proton-transfer in the excited state (ESIPT). In this investigation, a non-ESIPT PMDI was also prepared for comparison. These compounds presented absorption maxima in the ultraviolet region attributed to the allowed ¹π-π* electronic transitions. Redshifted absorptions were observed for the ESIPT compounds (3b-3c) due to their π-extended conjugation if compared to the non-ESIPT dye (3a). The compounds presented fluorescence emissions between 300 and 600 nm, dependent on the solvent polarity and their chemical structures. While compound 3a presents a single emission, a dual fluorescence could be observed for compounds 3b-3c. As expected for ESIPT compounds, the emission at higher energies could be related to the excited enol conformer (E*), and the emission with a large Stokes shift was attributed to the keto tautomer (K*). All compounds presented fluorescence emission in the solid state, whereas the ESIPT derivatives presented redshifted emissions with a large Stokes shift, as expected. Cyclic voltammetry was employed to investigate the electrochemical properties of these compounds. The HOMO and LUMO energy levels were estimated at -5.40 to -5.00 eV and -2.84 to -2.62 eV, and good thermal stability (T_d > 150 °C) was observed. Quantum chemical calculationsusingTD-DFT and DFT were performed to investigate the electronic and photophysical features of the molecules.

In Vivo Fluorescence Imaging-Guided Development of Near-Infrared AIEgens

In vivo fluorescence imaging has received extensive attention due to its distinguished advantages of excellent biosafety, high sensitivity, dual temporal-spatial resolution, real-time monitoring ability, and non-invasiveness. Aggregation-induced emission luminogens (AIEgens) with near-infrared (NIR) absorption and emission wavelengths are ideal candidate for in vivo fluorescence imaging for their large Stokes shift, high brightness and superior photostability. NIR emissive AIEgens provide deep tissue penetration depth as well as low interference from tissue autofluorescence. Here in this review, we summarize the molecular engineering strategies for constructing NIR AIEgens with high performances, including extending π-conjugation system and strengthen donor (D)-acceptor (A) interactions. Then the encapsulation strategies for increasing water solubility and biocompatibility of these NIR AIEgens are highlighted. Finally, the challenges and prospect of fabricating NIR AIEgens for in vivo fluorescence imaging are also discussed. We hope this review would provide some guidelines for further exploration of new NIR AIEgens.

Fluorescent Probes as a Tool in Diagnostic and Drug Delivery Systems

Over the last few years, the development of fluorescent probes has received considerable attention. Fluorescence signaling allows noninvasive and harmless real-time imaging with great spectral resolution in living objects, which is extremely useful for modern biomedical applications. This review presents the basic photophysical principles and strategies for the rational design of fluorescent probes as visualization agents in medical diagnosis and drug delivery systems. Common photophysical phenomena, such as Intramolecular Charge Transfer (ICT), Twisted Intramolecular Charge Transfer (TICT), Photoinduced Electron Transfer (PET), Excited-State Intramolecular Proton Transfer (ESIPT), Fluorescent Resonance Energy Transfer (FRET), and Aggregation-Induced Emission (AIE), are described as platforms for fluorescence sensing and imaging in vivo and in vitro. The presented examples are focused on the visualization of pH, biologically important cations and anions, reactive oxygen species (ROS), viscosity, biomolecules, and enzymes that find application for diagnostic purposes. The general strategies regarding fluorescence probes as molecular logic devices and fluorescence–drug conjugates for theranostic and drug delivery systems are discussed. This work could be of help for researchers working in the field of fluorescence sensing compounds, molecular logic gates, and drug delivery.

Pyridoxal Derived AIEgen for Fluorescence Turn-off Sensing of Cu2+ and Fe2+ Ions and Fluorescence Imaging of Latent Fingerprints

Schiff base 4-((E)-((E)-(2-hydroxybenzylidene)hydrazono)methyl)-5-(hydroxymethyl)-2-methylpyridin-3-ol (HSP) was synthesized by condensing vitamin B₆ cofactor pyridoxal with salicylaldehyde hydrazone, and characterized by standard spectroscopic techniques (FT-IR, ¹H NMR, ¹³C NMR, and ESI-MS). The solution of HSP in DMSO/HEPES (10 mM, pH = 7.4) mixed solvents with varying HEPES fractions (f_w) from 0 to 95% showed aggregation-induced emission (AIE). The AIE active HSP in 95% HEPES gave intense fluorescent emission at 570 nm was employed for the detection of metal ions. The fluorescence of HSP was quenched upon adding Cu²⁺ and Fe²⁺ ions. The association constant (K_a) of the Schiff base HSP with Cu²⁺ and Fe²⁺ ions was estimated as 4.08 × 10⁵ M^-1 and 1.23 × 10⁵ M^-1, respectively by using the online analysis tool BindFit v0.5. The HSP showed the detection limit down to 1.75 µM and 1.89 µM for Cu²⁺ and Fe²⁺ ions, respectively. Further, the aggregates of HSP were applied to visualize latent fingerprints (LFPs) over a non-porous glass slide.

Synthesis and Photophysical Study of Tetraphenyl Substituted BODIPY Based Phenyl-Monoselenide Probe for Selective Detection of Superoxide

Selenium containing tetraphenyl substituted BODIPY probe was successfully synthesized from respective selenium aldehyde and tetraphenyl pyrrole using Knoevenagel-type condensation. The product was characterized using various spectroscopic techniques (¹ H, ¹³ C, ⁷⁷Se, ¹¹B, and ¹⁹ F) and mass spectrometry. The probe was found to be selective and sensitive towards detection of superoxide over other ROS with a "turn-off" (quenched) fluorescence response. The detection limit of the probe was found to be 4.87 µM. The probe reacted with superoxide in less than a sec with a stoke shift of 35 nm.

Aza-phenol Based Macrocyclic Probes Design for "CHEF-on" Multi Analytes Sensor: Crystal Structure Elucidation and Application in Biological Cell Imaging

Metal bound macrocyclic compounds found in biological systems inspired us to design and synthesize two Robson-type macrocyclic Schiff-base chemosensors, H ₂ L1 (H ₂ L1=1,11-dimethyl-6,16-dithia-3,9,13,19-tetraaza-1,11(1,3)-dibenzenacycloicosaphane-2,9,12,19-tetraene-1,11-diol) and H ₂ L2 (H ₂ L2=1,11-dimethyl-6,16-dioxa-3,9,13,19-tetraaza-1,11(1,3)-dibenzenacycloicosaphane-2,9,12,19-tetraene-1,11-diol). Both the chemosensors have been characterized with different spectroscopic techniques. They act as multianalyte sensor and exhibit "turn-on" fluorescence toward different metal ions in 1X PBS (Phosphate Buffered Saline) solution. In presence of Zn²⁺, Al³⁺, Cr³⁺ and Fe³⁺ ions, H ₂ L1 exhibits ∼6-fold enhancement of emission intensity, while H ₂ L2 shows ∼6-fold enhancement of emission intensity in the presence of Zn²⁺, Al³⁺ and Cr³⁺ ions. The interaction between the different metal ion and chemosensor have been examined by absorption, emission, and ¹H NMR spectroscopy as well as by ESI-MS⁺ analysis. We have successfully isolated and solved the crystal structure of the complex [Zn(H ₂ L1)(NO₃)]NO₃ (1) by X-ray crystallography. The crystal structure of 1 shows 1:1 metal:ligand stoichiometry and helps to understand the observed PET-Off-CHEF-On sensing mechanism. LOD values of H ₂ L1 and H ₂ L2 toward metal ions are found to be ∼10^-8 and ∼10^-7 M, respectively. Large Stokes shifts of the probes against analytes (∼100 nm) make them a suitable candidate for biological cell imaging studies. Robson type phenol based macrocyclic fluorescence sensors are very scarce in the literature. Therefore, the tuning of structural parameters as the number and nature of donor atoms, their relative locations and presence of rigid aromatic groups can lead to the design of new chemosensors, which can accommodate different charged/neutral guest(s) inside its cavity. The study of the spectroscopic properties of this type of macrocyclic ligands and their complexes might open a new avenue of chemosensors.

Dual-Mode Multiple Ion Sensing via Analyte-Specific Modulation of Keto-Enol Tautomerization of an ESIPT Active Pyrene Derivative: Experimental Findings and Computational Rationalization

A pyrene-based e xcited - state intramolecular proton transfer (ESIPT) active probe PMHMP was synthesized, characterized, and employed for the ppb-level, dual-mode, and high-fidelity detection of Cu²⁺ (LOD: 7.8 ppb) and Zn²⁺ ions (LOD: 4.2 ppb) in acetonitrile medium. The colorless solution of PMHMP turned yellow upon the addition of Cu²⁺, suggesting its ratiometric, naked-eye sensing. On the contrary, Zn²⁺ ions displayed concentration-dependent fluorescence rise till a 0.5 mole fraction and subsequent quenching. Mechanistic investigations indicated the formation of a 1:2 exciplex (Zn²⁺:PMHMP) at a lower concentration of Zn²⁺, which eventually turned into a more stable 1:1 (Zn²⁺:PMHMP) complex with an additional amount of Zn²⁺ ions. However, in both cases, it was observed that the hydroxyl group and the nitrogen atom of the azomethine unit were involved in the metal ion coordination, which eventually altered the ESIPT emission. Furthermore, a green-fluorescent 2:1 PMHMP-Zn²⁺ complex was developed and additionally employed for the fluorimetric analysis of both Cu²⁺ and H₂PO₄ ^- ions. The Cu²⁺ ion, owing to its higher binding affinity for PMHMP, could replace the Zn²⁺ ion from the preformed complex. On the other hand, H₂PO₄ ^- formed a tertiary adduct with the Zn²⁺-complex, leading to a distinguishable optical signal. Furthermore, extensive and organized density functional theory calculations were performed to explore the ESIPT behavior of PMHMP and the geometrical and electronic properties of the metal complexes.

Excited-state intramolecular proton transfer (ESIPT)-based fluorescent probes for biomarker detection: design, mechanism, and application

Biomarkers are essential in biology, physiology, and pharmacology; thus, their detection is of extensive importance. Fluorescent probes provide effective tools for detecting biomarkers exactly. Excited state intramolecular proton transfer (ESIPT), one of the significant photophysical processes that possesses specific photoisomerization between Keto and Enol forms, can effectively avoid annoying interference from the background with a large Stokes shift. Hence, ESIPT is an excellent choice for biomarker monitoring. Based on the ESIPT process, abundant probes were designed and synthesized using three major design methods. In this review, we conclude probes for 14 kinds of biomarkers based on ESIPT explored in the past five years, summarize these general design methods, and highlight their application for biomarker detection in vitro or in vivo.

Fluorescence Turn-on of Tetraphenylethylene Derivative by Transfer from Cyclodextrin to Liposomes, HeLa Cells, and E. coli

Herein, trimethyl-β-cyclodextrin (TMe-β-CDx) and γ-cyclodextrin (γ-CDx) could dissolve a tetraphenylethylene derivative (TPE-OH₄ ) in water through high-speed vibration milling. The fluorescence intensity of the TMe-β-CDx-TPE-OH₄ complex was much higher than that of the γ-CDx-TPE-OH₄ complex, as the rotation of the central C=C double bond of TPE-OH₄ after photoactivation was inhibited in a smaller TMe-β-CDx cavity in comparison with the γ-CDx cavity. In contrast, the fluorescence intensity of the γ-CDx-TPE-OH₄ complex was very weak; nevertheless, it increased after the addition of liposomes due to the transfer of TPE-OH₄ from the γ-CDx cavity to the lipid membrane as a "turn-on" phenomenon. Furthermore, to apply temperature sensor, it was demonstrated that the fluorescence intensity in the liposomes depended on the phase-transition temperature. By using the fluorescence turn-on phenomenon, TPE-OH₄ could detect the presence of HeLa cells and E. coli by fluorescence.

A turn-on fluorescent probe based on ESIPT and AIEE mechanisms for the detection of butyrylcholinesterase activity in living cells and in non-alcoholic fatty liver of zebrafish

Butyrylcholinesterase (BChE) and acetylcholinesterase (AChE) are two important cholinesterase enzymes in human metabolism which are closely related to various diseases of the liver. BChE and AChE are difficult to be distinguished due to their similarity in biochemical properties. Therefore, developing BChE-specific probes with high sensitivity and low background reading is desirable for the relevant biological applications. Herein, we reported the design and synthesis of a fluorescent probe HBT-BChE for biological detection and imaging of BChE. The probe is triggered by BChE-mediated hydrolysis, releasing a fluorophore that holds AIEE and ESIPT properties with large Stokes shift (>100 nm), rendering the probe features of low background interference and high sensitivity. The probe can also distinguish BChE from AChE with a low detection limit of 7.540 × 10^-4 U/mL. Further in vitro studies have shown the ability of HBT-BChE to detect intracellular BChE activity, as well as to evaluate the efficiency of the BChE inhibitor. More importantly, the in vivo studies of imaging the BChE activity level in liver tissues using zebrafish as the model animal demonstrated the potential of HBT-BChE as a powerful tool for non-alcoholic fatty liver disease.

ESIPT-Capable 4-(2-Hydroxyphenyl)-2-(Pyridin-2-yl)-1H-Imidazoles with Single and Double Proton Transfer: Synthesis, Selective Reduction of the Imidazolic OH Group and Luminescence

1H-Imidazole derivatives establish one of the iconic classes of ESIPT-capable compounds (ESIPT = excited state intramolecular proton transfer). This work presents the synthesis of 1-hydroxy-4-(2-hydroxyphenyl)-5-methyl-2-(pyridin-2-yl)-1H-imidazole (L^OH,OH) as the first example of ESIPT-capable imidazole derivatives wherein the imidazole moiety simultaneously acts as a proton acceptor and a proton donor. The reaction of L^OH,OH with chloroacetone leads to the selective reduction of the imidazolic OH group (whereas the phenolic OH group remains unaffected) and to the isolation of 4-(2-hydroxyphenyl)-5-methyl-2-(pyridin-2-yl)-1H-imidazole (L^H,OH), a monohydroxy congener of L^OH,OH. Both L^OH,OH and L^H,OH demonstrate luminescence in the solid state. The number of OH···N proton transfer sites in these compounds (one for L^H,OH and two for L^OH,OH) strongly affects the luminescence mechanism and color of the emission: L^H,OH emits in the light green region, whereas L^OH,OH luminesces in the orange region. According to joint experimental and theoretical studies, the main emission pathway of both compounds is associated with T₁ → S₀ phosphorescence and not related to ESIPT. At the same time, L^OH,OH also exhibits S₁ → S₀ fluorescence associated with ESIPT with one proton transferred from the hydroxyimidazole moiety to the pyridine moiety, which is not possible for L^H,OH due to the absence of the hydroxy group in the imidazole moiety.

Modulating Dual Fluorescence Emissions in Imine-Based Probes to Distinguish D2O and H2O

How to distinguish D₂O and H₂O and determine the trace H₂O content in D₂O solvent, by using molecule-based spectral probes, is an intriguing topic in analytical chemistry, yet considerably few examples remain up to now, likely due to the very similar physical/chemical properties between D₂O and H₂O. In this work, we found that both the hydrolysis reactions to release fluorescent amines and aggregation-induced emission (AIE) of imines, functioning as dual fluorescence signals to distinguish D₂O and H₂O, could be modulated by changing the imine structures. The hydrophobicity of imines showed an important contribution to the ability of modulating the hydrolysis reactions and AIE, demonstrating a significant difference on fluorescence signals in D₂O and H₂O solvents. Among all tested imines, probe 3, condensed from 2-naphthylamine and salicylaldehyde, was found to have the potential ability to act as an ideal candidate for probing the H₂O content in D₂O solvent, particularly in a low H₂O content range, using the ratiomeric emission signals.

The design of small-molecule prodrugs and activatable phototherapeutics for cancer therapy

Cancer remains as one of the most significant health problems, with approximately 19 million people diagnosed worldwide each year. Chemotherapy is a routinely used method to treat cancer patients. However, current treatment options lack the appropriate selectivity for cancer cells, are prone to resistance mechanisms, and are plagued with dose-limiting toxicities. As such, researchers have devoted their attention to developing prodrug-based strategies that have the potential to overcome these limitations. This tutorial review highlights recently developed prodrug strategies for cancer therapy. Prodrug examples that provide an integrated diagnostic (fluorescent, photoacoustic, and magnetic resonance imaging) response, which are referred to as theranostics, are also discussed. Owing to the non-invasive nature of light (and X-rays), we have discussed external excitation prodrug strategies as well as examples of activatable photosensitizers that enhance the precision of photodynamic therapy/photothermal therapy. Activatable photosensitizers/photothermal agents can be seen as analogous to prodrugs, with their phototherapeutic properties at a specific wavelength activated in the presence of disease-related biomarkers. We discuss each design strategy and illustrate the importance of targeting biomarkers specific to the tumour microenvironment and biomarkers that are known to be overexpressed within cancer cells. Moreover, we discuss the advantages of each approach and highlight their inherent limitations. We hope in doing so, the reader will appreciate the current challenges and available opportunities in the field and inspire subsequent generations to pursue this crucial area of cancer research.

Facile Synthesis of Tetraphenylethene (TPE)-Based Fluorophores Derived by π-Extended Systems: Opposite Mechanofluorochromism, Anti-Counterfeiting and Bioimaging

Although remarkable progresses are achieved in the design and development of the mono-shift in photoluminescence for mechanofluorochromic materials, it is still a severe challenge to explore the opposite mechanofluorochromic materials with both blue- and red-shifted photoluminescence. Herein, two unprecedented 4,5-bis(TPE)-1H-imidazole fused pyridine or quinoline-based fluorophores X-1 and X-2 were designed and synthesized, and X-1 and X-2, exhibit completely opposite mechanofluorochromic behavior. Under UV lamp, the color of pristine X-1 changed from blue to green with reversible redshifted 27 nm in fluorescence emission spectra after ground, while the color of pristine X-2 changed from red to yellow with reversible blue-shifted 74 nm after ground. The detailed characterizations (including PXRD, SEM and DSC) confirmed that this opposite mechanofluorochromism was attributed to the transformation of order-crystalline and amorphous states. The crystal structure analysis and theoretical calculation further explain that opposite mechanofluorochromic behavior take into account different π-π stacking mode by induced π-extended systems. In addition, these TPE-based fluorophores (X-1 and X-2) exhibited excellent bio-compatibility and fluorescence properties for bio-imaging, writable data storage and anti-counterfeiting materials.

Fluorescent molecular probes for imaging and detection of oxidases and peroxidases in biological samples

Oxidases and peroxidases are two subclasses of oxidoreductases. The abnormal expression of oxidases (such as tyrosinase, cytochrome P450 oxidases, and monoamine oxidases) and peroxidases (such as glutathione peroxidase, myeloperoxidase, and eosinophil peroxidase) is relative with some diseases. Therefore, the analysis of oxidases and peroxidases is great important for disease diagnosis and treatment. Fluorescent probes present simple protocol, high sensitivity and good stability in sensing field. Molecule fluorescent probes are constructed with chemical groups that tunes their fluorescence emission in response to binding events, chemical reactions, and the surrounding environment. A fluorescent probe is an efficient tool for visualizing the activity of enzymes in living organisms on the basis of its high specificity, sensitivity, and noninvasiveness characteristics. In this review, we focus on the sensing of oxidases and peroxidases by molecule fluorescent probes, and hope to bring new insight to wide researchers about oxidases and peroxidases in biological samples.

Brønsted Acid/Base Site Isolated in a Pentanuclear Scaffold

The concept of Brønsted-Lowry acids and bases is long and widely recognized as the most reasonable theory to explain the behavior of H⁺ ions. Here, we report a Brønsted acid/base pair that does not follow this theory. Two heteronuclear metal complexes, in which Brønsted acid/base sites are sterically isolated, were synthesized and characterized. These sterically isolated sites exhibited anomalous behavior, wherein the H⁺ species encapsulated in the Brønsted acid site did not undergo a deprotonation reaction, and the corresponding protonation reaction at the Brønsted base site failed to proceed. As a result, two states that are in a relationship of a Brønsted acid/base pair stably exist over a wide pH range without any interconversion, generating a thermodynamically metastable state. Additionally, these two states exhibited distinct electron transfer abilities and reactivities. The system presented in this study is in sharp contrast with the traditional concept of Brønsted-Lowry acids and bases.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Tautomeric Equilibrium in 1-Benzamidoisoquinoline Derivatives

In this study, the tautomeric equilibrium of a sequence of 1-benzamidoisoquinoline derivatives was investigated with the tools of NMR spectroscopy and computational chemistry. The equilibrium between different tautomers in these systems could be controlled via the substitution effect, and the relative content of the amide form varied from 74% for the strong electron-donating NMe2 substituent to 38% for the strong electron-accepting NO2 group in the phenyl ring. In contrast to the previously investigated 2-phenacylquinoline derivatives, the most stable and thus most abundant tautomer in the 1-benzamidoisoquinoline series except the two most electron-accepting substituents was an amide. The intramolecular hydrogen bond present in the enol tautomer competed with the intermolecular hydrogen bonds created with the solvent molecules and thus was not a sufficient factor to favor this tautomer in the mixture. Although routinely computational studies of tautomeric equilibrium are performed within the continuum solvent models, it is proven here that the inclusion of the explicit solvent is mandatory in order to reproduce the experimental tendencies observed for this type of system, facilitating strong intermolecular hydrogen bonds.

Interplay of Dual-Proton Transfer Relay to Achieve Full-Color Panel Luminescence in Excited-State Intramolecular Proton Transfer (ESIPT) Fluorophores

A new design was applied for the facile synthesis of pure organic photoluminescent molecules with dual excited-state intramolecular proton transfer (ESIPT) sites. In this novel class of emitters, full-color panel emission from blue, green, and yellow to red, including white light, can be achieved in different solvents as modulated by the enol-keto(1st)-keto(2nd) tautomer emissions. A comprehensive transient photophysical study verifies that keto(1st) and keto(2nd) have a precursor (<0.8 ps)-successor (∼20 ps)-relayed absorbance relationship, and then a fast equilibrium between the two is established, resulting in dual emissions in the nanosecond scale (∼1900 ps). Through the research on copper ions' selective PL response, the dual-ESIPT mechanism was further verified; in addition, the study of solid-state PL changes upon the stimulus of organic vapor manifests the potential application sensitivity of the molecules as dual-ESIPT sensors. Theoretical results including reaction potential energy surface analyses manifest the fact that dual-proton transfer goes along a sequential route with a smaller energy barrier, firmly supporting the experimental results. An intrinsic system that undergoes intramolecular double proton relayed transfer is thus established for the achievement of much broadened optical responses and full-color display, providing reference for the design and application of advanced dual-ESIPT optical materials.