Laccase: a green catalyst for the biosynthesis of poly-phenols

Synthesis and characterization of a novel ruthenium(ii) trisbipyridine complex magnetic nanocomposite for the selective oxidation of phenols

Anchoring ruthenium(ii) trisbipyridine complex [Ru(Bpy)₃]²⁺ into a magnetic dendritic fibrous silica nanostructure produces an unprecedented strong nanocatalyst, FeNi₃/DFNS/[Ru(Bpy)₃]²⁺.

Combining antioxidant hydrogels with self-assembled microparticles for multifunctional wound dressings

A multi-functional composite to be employed as a dressing material was prepared by combining hydrogel and microparticle systems.

Synthesis and characterization of a novel CNT-FeNi3/DFNS/Cu(ii) magnetic nanocomposite for the photocatalytic degradation of tetracycline in wastewater

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu). Furthermore, FeNi₃/DFNS/Cu was supported on carbon nanotubes (CNTs) via an usual nozzle electrospinning method (CNT-FeNi₃/DFNS/Cu). In addition, its performance as a photocatalyst for the degradation of tetracycline was tested in a batch reactor. Tetracycline is an antibiotic that is commonly utilized in veterinary medicine and in the treatment of human infections, but is hazardous to aquatic environments. However, the usual processes for the removal of tetracycline are not efficient. The eco-friendly attributes of this catalytic system include high catalytic activity and ease of recovery from the reaction mixture using an external magnet, and it can be reused several times without significant loss in its performance. Also, protocols such as hot filtration, and mercury poisoning provided complete insight into the nature of this heterogeneous catalyst.

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu).

Polymers from Bamboo Extracts Produced by Laccase

A green methodology for the production of polymers from bamboo powder was investigated. The optimal conditions for the extraction of components from bamboo were defined by incubating the powder in an acetate buffer (pH 5) under boiling for 2 h. Native laccase from Myceliophthora thermophila was used afterwards to oxidize the extracts from the final resulting extraction liquid. The reduction of the free OH content after enzymatic oxidation, as well as the ¹H NMR data, confirmed the efficient polymerization of the extracts. The bamboo powder samples were also subjected to high compression and curing, in the absence and in the presence of laccase, to evaluate the hardness of the tablets formed by enzymatic bonding events. The results revealed a higher hardness when the tablets were produced in the presence of laccase, confirming the role of the catalyst on the precipitation of colloidal lignin and phenolic extractives. Herein we produce new oligomers/polymers by laccase oxidation of the extracts resulting from a clean method boiling. At the same time, the data open up new routes for the exploitation of new lignocellulosic materials by the direct application of the enzyme on the bamboo powder material.

Laccase-Catalyzed Reduction of Oxygen at Electrodes Modified by Carbon Nanotubes with Adsorbed Promazine or Acetosyringone

One of the problems with the use of enzymes as catalysts in biofuel cells is to achieve good contact between the enzyme and the electrode surface. One solution to this problem is the use of various nanostructures such as carbon nanotubes, fullerenes, graphene derivatives, gold nanoparticles, as well as mediators for the construction of electrodes. Acetosyringone and promazine adsorbed on glassy carbon electrodes (GCEs) covered with multiwall carbon nanotubes (MWCNTs) and laccase were used as biocathodes. These mediators showed very efficient adsorption on modified glassy carbon electrodes covered with MWCNTs and enabled efficient and stable adsorption of laccase, which acts as the bioelectrocatalyst. Very good electrical contact between the electrode surface and the laccase enzymatic active sites made it possible to increase the catalytic current density of oxygen-reduction by about 82% compared to electrodes without mediators. Application of acetosyringone and promazine used in the construction of biocathode also improved the current and power of the biobattery ca. twice comparing to the system without mediators. The device output reached the power that equaled approximately 2 mW/cm2 at 0.8 V and open circuit potential (OCP) was 1.6 V. The systems elaborated proved also useful in oxygen sensing and allowed to determine lower oxygen concentrations in solution compared to the GCE modified with MWCNTs and laccase alone. The electrode showed also better stability in long-timescale measurements.

Conductive Cotton by In Situ Laccase-Polymerization of Aniline

Conductive cotton fabrics were obtained via in situ aniline polymerization by laccase from Myceliophthora thermophila under mild reaction conditions without the addition of strong proton acids. The reactions were conducted using two types of reactors, namely a water bath (WB) and an ultrasonic bath (US), and the role of a mediator, 1-hydroxybenzotriazol (HBT), on the laccase-assisted polymerization of aniline was investigated. A similar polymerization degree was obtained when using both reactors-however, the ultrasonic bath allowed the experiments to be conducted in shorter periods of time (24 h for WB vs. 2 h for US). The data obtained also revealed that the mediator (1-hydroxybenzotriazol-HBT) played a crucial role in aniline oxidation. A higher conversion yield and polymerization degree were obtained when the reaction was conducted in the presence of this compound, as confirmed by MALDI-TOF analysis. The cotton fabrics coated with polyaniline presented deep coloration and conductivity, especially when the mediator was included on the reactional system. The results obtained are a step forward in the enzymatic polymerization of aniline with the purpose of obtaining coloured conductive textile surfaces, with potential applications in wearable electronics.

A novel homodimer laccase from Cerrena unicolor BBP6: Purification, characterization, and potential in dye decolorization and denim bleaching

The white-rot fungus Cerrena unicolor BBP6 produced up to 243.4 U mL-1 laccase. A novel laccase isoform LacA was purified; LacA is a homodimer with an apparent molecular mass of 55 kDa and an isoelectric point of 4.7. Its optimal pH was 2.5, 4.0, and 5.5 when 2, 2'-Azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS), guaiacol, and 2, 6-dimethoxyphenol (2, 6-DMP) were used as the substrates, respectively. The optimal temperature was 60°C for ABTS and 80°C for both guaiacol and 2, 6-DMP. LacA retained 82-92% activity when pH was greater than 4 and 42%-92% activity at or below 50°C. LacA was completely inhibited by 0.1 mM L-cysteine, 1 mM Dithiothreitol, and 10 mM metal ions, Ca2+, Mg2+ and Co2+. LacA had good affinity for ABTS, with a Km of 49.1 μM and a kcat of 3078.9 s-1. It decolorized synthetic dyes at 32.3-87.1%. In the presence of 1-hydroxybenzotriazole (HBT), LacA decolorized recalcitrant dyes such as Safranine (97.1%), Methylene Blue (98.9%), Azure Blue (96.6%) and simulated textile effluent (84.6%). With supplemented manganese peroxidase (MnP), Mn2+ and HBT, the purified LacA and BBP6 fermentation broth showed great potential in denim bleaching, with an up to 5-fold increase in reflectance values.

Exploring PEGylated and immobilized laccases for catechol polymerization

Laccases have been reported for their ability to eliminate hazardous phenolic compounds by oxidative polymerization. The exploitation of the oxidative behavior of different laccase forms, namely free/native, free/PEGylated, immobilized/native and immobilized/PEGylated, was assessed in this study. We found that PEGylated and immobilized laccase forms have differentiated catalytic behavior revealing distinct conversion rates and differentiated poly(catechol) chains, as confirmed by UV-Visible spectroscopy, by the total content of OH groups and by MALDI-TOF spectroscopy. The synergy underlying on the immobilized/PEGylated enzyme forms reveal to be responsible for the highest conversion rates and for the longer polymers produced.

Bio-coloration of bacterial cellulose assisted by immobilized laccase

In this work a process for the bio-coloration of bacterial cellulose (BC) membranes was developed. Laccase from Myceliophthora thermophila was immobilized onto BC membranes and retained up to 88% of residual activity after immobilization. Four compounds belonging to the flavonoids family were chosen to test the in situ polymerase activity of immobilized laccase. All the flavonoids were successfully polymerized by laccase giving rise to yellow, orange and dark brown oligomers which conferred color to the BC support. The optimal bio-coloration conditions were studied for two of the tested flavonoids, catechol and catechin, by varying the concentration and time of incubation. High color depth and resistance to washing were obtained for both compounds. The highly porous bacterial cellulose material demonstrated great performance as a bio-coloration support, in contrast to other materials cited in literature, like cotton or wool. The process developed is presented as an environmentally friendly alternative for bacterial cellulose bio-coloration and will contribute deeply for the development of new fashionable products within this material.