Direct detection of nucleic acid hybridization on the surface of a charge coupled device

Direct detection of isotopically labeled metabolites bound to a protein microarray using a charge-coupled device

A charge-coupled device (CCD) was used to quantitatively detect isotope-labeled ligands bound to a protein microarray. Protein microarrays with protein dots, 10-50 microm in diameter, were fabricated on an aluminized Mylar film using an electrospray deposition technique. Proteins in dots were immobilized by cross-linking in glutaraldehyde vapor. After contact with solutions of isotope-labeled metabolites, the protein microarrays were washed, dried and placed face down onto the surface of a standard B/W video CCD chip with the protective window removed. We show here that such a simple inexpensive CCD detector can be used to quantify distribution of 14C and other radioactive isotopes on microarrays.

Instrumentation for the genome project

Much of the recent rapid progress in large-scale genomic sequencing has been driven by the dramatic improvements both in the area of biological protocols and in the availability of improved laboratory instrumentation and automation platforms. We discuss recent developments in the area of bioinstrumentation that are contributing to the current revolution in genetic analysis. Examples of systems for laboratory automation are described together with specific single-purpose instruments. Emphasis is placed on those tools that are contributing significantly to the scale-up of genomic mapping and sequencing efforts. In addition, we present a selection of more advanced measurement techniques and instrumentation developments that are likely to contribute significantly to future advances in sequencing and genome analysis.

Attachment of benzaldehyde-modified oligodeoxynucleotide probes to semicarbazide-coated glass

Attachment of oligodeoxynucleotides (ODNs) containing benzaldehyde (BAL) groups to semicarbazide-coated glass (SC-glass) slides is described. 5'-BAL-ODNs are prepared using automated DNA synthesis and an acetal-protected BAL phosphoramidite reagent. The hydrophobic protecting group simplifies purification of BAL-ODNs by reverse phase HPLC and is easily removed using standard acid treatment. The electrophilic BAL-ODNs are stable in solution, but react specifically with semicarbazide groups to give semicarbazone bonds. Glass slides were treated with a semicarbazide silane to give SC-glass. BAL-ODNs are coupled to the SC-glass surface by a simple one-step procedure that allows rapid, efficient and stable attachment. Hand-spotted arrays of BAL-ODNs were prepared to evaluate loading density and hybridization properties of immobilized probes. Hybridization to radiolabeled target strands shows that at least 30% of the coupled ODNs were available for hybridization at maximum immobilization density. The array was used to probe single nucleotide polymorphisms in synthetic DNA targets, and PCR products were correctly genotyped using the same macroarray. Application of this chemistry to manufacturing of DNA microarrays for sequence analysis is discussed.

High-Throughput Genomic and Proteomic Analysis Using Microarray Technology

Background: High-density microarrays are ideally suited for analyzing thousands of genes against a small number of samples. The next step in the discovery process is to take the resulting genes of interest and rapidly screen them against thousands of patient samples, tissues, or cell lines to further investigate their involvement in disease risk or the response to medication.

Methods: We used a microarray technology platform for both single-nucleotide polymorphisms (SNPs) and protein expression. Each microarray contains up to 250 elements that can be customized for each application. Slides contained either a 16- or 96-microarray format (4000–24 000 elements per slide), allowing the corresponding number of samples to be rapidly processed in parallel.

Results: Results for SNP genotyping and protein profiling agreed with results of restriction fragment length polymorphism (RFLP) analysis or ELISA, respectively. Genotyping analyses, using the microarray technology, on large sample sets over multiple polymorphisms in the NAT2 gene were in full agreement with traditional methodologies, such as sequencing and RFLP analysis. The multiplexed protein microarray had correlation coefficients of 0.82–0.99 (depending on analyte) compared with ELISAs.

Conclusions: The integrated microarray technology platform is adaptable and versatile, while offering the high-throughput capabilities needed for drug development and discovery applications.

In situ synthesis of oligonucleotide arrays by using surface tension

This work describes the in situ synthesis of oligonucleotide arrays on glass surfaces. These arrays are composed of features defined and separated by differential surface tension (surface tension arrays). Specifically, photolithographic methods were used to create a series of spatially addressable, circular features containing an amino-terminated organosilane coupled to the glass through a siloxane linkage. Each feature is bounded by a perfluorosilanated surface. The differences in surface energies between the features and surrounding zones allow for chemical reactions to be readily localized within a defined site. The aminosilanation process was analyzed using contact angle, X-ray photoelectron spectroscopy (XPS), and time-of-flight/secondary ion mass spectroscopy (TOF-SIMS). The efficiency of phosphoramidite-based oligonucleotide synthesis on these surface tension arrays was measured by two methods. One method, termed step-yields-by-hybridization, indicates an average synthesis efficiency for all four (A,G,C,T) bases of 99.9 +/- 1.1%. Step yields measured for the individual amidite bases showed efficiencies of 98.8% (dT), 98.0% (dA), 97.0% (dC), and 97.6% (dG). The second method for determining the amidite coupling efficiencies was by capillary electrophoresis (CE) analysis. Homopolymers of dT (40- and 60mer), dA (40mer), and dC (40mer) were synthesized on an NH(4)OH labile linkage. After cleavage, the products were analyzed by CE. Synthesis efficiencies were calculated by comparison of the full-length product peak with the failure peaks. The calculated coupling efficiencies were 98.8% (dT), 96.8% (dA), and 96.7% (dC).

Detecting and genotyping Escherichia coli O157:H7 using multiplexed PCR and nucleic acid microarrays

Rapid detection and characterization of food borne pathogens such as Escherichia coli O157:H7 is crucial for epidemiological investigations and food safety surveillance. As an alternative to conventional technologies, we examined the sensitivity and specificity of nucleic acid microarrays for detecting and genotyping E. coli O157:H7. The array was composed of oligonucleotide probes (25-30 mer) complementary to four virulence loci (intimin, Shiga-like toxins I and II, and hemolysin A). Target DNA was amplified from whole cells or from purified DNA via single or multiplexed polymerase chain reaction (PCR), and PCR products were hybridized to the array without further modification or purification. The array was 32-fold more sensitive than gel electrophoresis and capable of detecting amplification products from < 1 cell equivalent of genomic DNA (1 fg). Immunomagnetic capture, PCR and a microarray were subsequently used to detect 55 CFU ml(-1) (E. coli O157:H7) from chicken rinsate without the aid of pre-enrichment. Four isolates of E. coli O157:H7 and one isolate of O91:H2, for which genotypic data were available, were unambiguously genotyped with this array. Glass-based microarrays are relatively simple to construct and provide a rapid and sensitive means to detect multiplexed PCR products; the system is amenable to automation.

Minisequencing on oligonucleotide microarrays: comparison of immobilisation chemistries

In the microarray format of the minisequencing method multiple oligonucleotide primers immobilised on a glass surface are extended with fluorescent ddNTPs using a DNA polymerase. The method is a promising tool for large-scale single nucleotide polymorphism (SNP) detection. We have compared eight chemical methods for covalent immobilisation of the oligonucleotide primers on glass surfaces. We included both commercially available, activated slides and slides that were modified by ourselves. In the comparison the differently derivatised glass slides were evaluated with respect to background fluorescence, efficiency of attaching oligonucleotides and performance of the primer arrays in minisequencing reactions. We found that there are significant differences in background fluorescence levels among the different coatings, and that the attachment efficiency, which was measured indirectly using extension by terminal transferase, varied largely depending on which immobilisation strategy was used. We also found that the attachment chemistry affects the genotyping accuracy, when minisequencing on microarrays is used as the genotyping method. The best genotyping results were observed using mercaptosilane-coated slides attaching disulfide-modified oligonucleotides.

A factorial analysis of silanization conditions for the immobilization of oligonucleotides on glass surfaces

The modification of glass surfaces with (3-mercaptopropyl)trimethoxysilane and the application of this to DNA chip technology are described. A range of factors influencing the silanization method, and hence the number of surface-bound, chemically active thiol groups, were investigated using a design of experiment approach based on analysis of variance. The number of thiol groups introduced on glass substrates were measured directly using a specific radiolabel, [14C]cysteamine hydrochloride. For liquid-phase silanization, the number of surface-bound thiol groups was found to be dependent on both postsilanization thermal curing and silanization time and relatively independent of silane concentration, reaction temperature, and sample pretreatment. Depending on the conditions used in liquid-phase silanization, (1.3-9.0) x 10(12) thiol groups/cm2 on the glass samples were bound. The reliability and repeatability of liquid- and vacuum-phase silanization were also investigated. Eighteen-base oligonucleotide probes were covalently attached to the modified surfaces via a 3'-amino modification on the DNA and subsequent reaction with the cross-linking reagent N-(gamma-maleimidobutyryloxy) succinimide ester (GMBS). The resulting probe levels were determined and found to be stoichiometric with that of the introduced thiol groups. These results demonstrate that silanization of glass surfaces under specific conditions, prior to probe attachment, is of great importance in the development of DNA chips that use the simple concept of the covalent attachment of presynthesized oligonucleotides to silicon oxide surfaces.

Evaluation of three-dimensional microchannel glass biochips for multiplexed nucleic acid fluorescence hybridization assays

Three-dimensional, flow-through microchannel glass substrates have a potential for enhanced performance, including increased sensitivity and dynamic range, over traditional planar substrates used in medium-density microarray platforms. This paper presents a methodology for the implementation of multiplexed nucleic acid hybridization fluorescence assays on microchannel glass substrates. Fluorescence detection was achieved, in a first instance, using conventional low-magnification microscope objective lenses, as imaging optics whose depth-of-field characteristics match the thickness of the microchannel glass chip. The optical properties of microchannel glass were shown, through experimental results and simulations, to be compatible with the quantitative detection of heterogeneous hybridization events taking place along the microchannel sidewalls, with detection limits for oligonucleotide targets in the low-attomole range.

A review of molecular recognition technologies for detection of biological threat agents

The present review summarizes the state of the art in molecular recognition of biowarfare agents and other pathogens and emphasizes the advantages of using particular types of reagents for a given target (e.g. detection of bacteria using antibodies versus nucleic acid probes). It is difficult to draw firm conclusions as to type of biorecognition molecule to use for a given analyte. However, the detection method and reagents are generally target-driven and the user must decide on what level (genetic versus phenotypic) the detection should be performed. In general, nucleic acid-based detection is more specific and sensitive than immunological-based detection, while the latter is faster and more robust. This review also points out the challenges faced by military and civilian defense components in the rapid and accurate detection and identification of harmful agents in the field. Although new and improved sensors will continue to be developed, the more crucial need in any biosensor may be the molecular recognition component (e.g. antibody, aptamer, enzyme, nucleic acid, receptor, etc.). Improvements in the affinity, specificity and mass production of the molecular recognition components may ultimately dictate the success or failure of detection technologies in both a technical and commercial sense. Achieving the ultimate goal of giving the individual soldier on the battlefield or civilian responders to an urban biological attack or epidemic, a miniature, sensitive and accurate biosensor may depend as much on molecular biology and molecular engineering as on hardware engineering. Fortunately, as this review illustrates, a great deal of scientific attention has and is currently being given to the area of molecular recognition components. Highly sensitive and specific detection of pathogenic bacteria and viruses has increased with the proliferation of nucleic acid and immuno-based detection technologies. If recent scientific progress is a fair indicator, the future promises remarkable new developments in molecular recognition elements for use in biosensors with a vast array of applications.

Miniaturization Technologies for Molecular Diagnostics

Background: Molecular diagnostics devices are becoming smaller. With the advancement of miniaturization technologies, microchip-based systems will soon be available for genetic testing. The purpose of this review is to highlight the underlying principles in miniaturization, the strategies being developed for bioanalysis, and the potential impact on the practice of this rapidly growing medical discipline.

Approach: The author discusses DNA microchips and their practical importation into the clinical laboratory, based on his background in medical device and microchip design and development. His discussion is supported by a body of literature covering both biomedical and electrical engineering and more recent publications in the field of molecular genetics and pathology.

Content: This review is descriptive and intended to outline the technologic and methodologic approaches to the creation of an integrated genetic analysis instrument based on miniature components. The review draws on published scientific evaluations of these devices without regard to the companies involved in their development.

Summary: The intent of this review is that the reader will better understand the variety of technical approaches toward the miniaturization of molecular genetic testing for the clinical laboratory. With insight into the principles underlying the operation of these chips and the integrated systems, the end user can better evaluate the value to the field in terms of making molecular genetics testing simpler, faster, and less expensive.

Microminiaturized immunoassays using quantum dots as fluorescent label by laser confocal scanning fluorescence detection

An immunoassay readout method based on fluorescent imaging analysis with laser confocal scanning is described. The ZnS-coated CdSe quantum dots (ZnS/CdSe QDs) were linked to a detection antibody. Immunoassay was carried out on a glass chip using a sandwich assay approach, where antibody covalently bound to a glass chip was allowed to capture antigen specially. Afterwards, the detection antibody labeled with QD was allowed to bind selectively to the captured antigen. The fluorescent signals of the sandwich conjugate were detected by a laser confocal scanner. A diode laser was used to excite efficiently the fluorescent signals while bovine serum albumin was used to eliminate nonspecific binding sites. The detection limit of this approach was up to 10(-9) M under current experimental conditions. The specificity of the QDs-labeled immunoglobulin (IgG) was tested by an experiment using goat IgG and human IgG samples. The result was consistent with the binding specificity in a sandwich-type assay. The potential of this method to function as a simple and efficient readout strategy for immunoassay in biochip is discussed.

Optimizing the immobilization of single-stranded DNA onto glass beads

The attachment of single-stranded DNA to a solid support has many biotechnology and molecular biology applications. This paper compares different immobilization chemistries to covalently link single-stranded DNA (20 base pairs), oligo(1), onto glass beads via a 5'-amino terminal end. Immobilization methods included a one-step 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and a two-step EDC reaction to succinylated and PEG-modified glass beads. The third method used 1,4-phenylene diisothiocyanate to immobilize oligo(1) to aminopropyl glass beads. The influence of coupling buffer, oligo(1) concentration, and EDC concentration was also investigated. The one-step EDC-mediated procedure with succinylated or PEG-modified beads in 0.1 M MES buffer, pH 4.5, resulted in the highest immobilization efficiency, 82-89%. EDC concentrations greater than 50 mM and oligo(1) concentrations of 3 microg/g bead were required for effective immobilization. A complementary oligonucleotide, oligo(2), was able to hybridize to the immobilized oligo(1) with a 58% efficiency. This oligonucleotide was subsequently released at 70 degrees C. The relationship between the surface density of oligo(1) and the hybridization efficiency of the complementary oligonucleotide is described.

Solid phase DNA amplification: characterisation of primer attachment and amplification mechanisms

Different chemical methods used to attach oligonucleotides by their 5'-end on a glass surface were tested in the framework of solid phase PCR where surface-bound instead of freely-diffusing primers are used to amplify DNA. Each method was first evaluated for its capacity to provide a high surface coverage of oligonucleotides essentially attached via a 5'-specific linkage that satisfyingly withstands PCR conditions and leaves the 3'-ends available for DNA polymerase activity. The best results were obtained with 5'-thiol-modified oligonucleotides attached to amino-silanised glass slides using a heterobifunctional cross-linker reagent. It was then demonstrated that the primers bound to the glass surface using the optimal chemistry can be involved in attaching and amplifying DNA molecules present in the reaction mix in the absence of freely-diffusing primers. Two distinct amplification processes called interfacial and surface amplification have been observed and characterised. The newly synthesised DNA can be detected and quantified by radioactive and fluorescent hybridisation assays. These new surface amplification processes are seen as an interesting approach for attachment of DNA molecules by their 5'-end on a solid support and can be used as an alternative route for producing DNA chips for genomic studies.

DNA probes on chip surfaces studied by scanning force microscopy using specific binding of colloidal gold

Single-stranded DNA was covalently bound on chip surfaces using two different silanization procedures. The resulting surfaces were characterized by fluorescence and scanning force microscopy using sequence-complementary DNA molecules with labels. Colloidal gold (30 nm) was used as the topographic label. Scanning force microscopy revealed the individual labels on the surface and their distribution. Steps of silane layers or DNA-modified surfaces prepared using an elastomeric mask provided internal controls for comparison of modified with unmodified surfaces.

Covalent attachment of oligodeoxyribonucleotides to amine-modified Si (001) surfaces

A recently described reaction for the UV-mediated attachment of alkenes to silicon surfaces is utilized as the basis for the preparation of functionalized silicon surfaces. UV light mediates the reaction of t-butyloxycarbonyl (t-BOC) protected omega-unsaturated aminoalkane (10-aminodec-1-ene) with hydrogen-terminated silicon (001). Removal of the t-BOC protecting group yields an aminodecane-modified silicon surface. The resultant amino groups can be coupled to thiol-modified oligodeoxyribonucleotides using a heterobifunctional crosslinker, permitting the preparation of DNA arrays. Two methods for controlling the surface density of oligodeoxyribonucleotides were explored: in the first, binary mixtures of 10-aminodec-1-ene and dodecene were utilized in the initial UV-mediated coupling reaction; a linear relationship was found between the mole fraction of aminodecene and the density of DNA hybridization sites. In the second, only a portion of the t-BOC protecting groups was removed from the surface by limiting the time allowed for the deprotection reaction. The oligodeoxyribonucleotide-modified surfaces were extremely stable and performed well in DNA hybridization assays. These surfaces provide an alternative to gold or glass for surface immobilization of oligonucleotides in DNA arrays as well as a route for the coupling of nucleic acid biomolecular recognition elements to semiconductor materials.

Rotating rod renewable microcolumns for automated, solid-phase DNA hybridization studies

The development of a new temperature-controlled renewable microcolumn flow cell for solid-phase nucleic acid hybridization in an automated sequential injection system is described. The flow cell included a stepper motor-driven rotating rod with the working end cut to a 45 degrees angle. In one position, the end of the rod prevented passage of microbeads while allowing fluid flow; rotation of the rod by 180 degrees releases the beads. This system was used to rapidly test many hybridization and elution protocols to examine the temperature and solution conditions required for sequence-specific nucleic acid hybridization. Target nucleic acids labeled with a near-infrared fluorescent dye were detected immediately postcolumn during all column perfusion and elution steps using a flow-through fluorescence detector. Temperature control of the column and the presence of Triton X-100 surfactant were critical for specific hybridization. Perfusion of the column with complementary oligonucleotide (200 microL, 10 nM) resulted in hybridization with 8% of the DNA binding sites on the microbeads with a solution residence time of less than 1 s and a total sample perfusion time of 40 s. The use of the renewable column system for detection of an unlabeled PCR product in a sandwich assay was also demonstrated.

Automation for genomics, part two: sequencers, microarrays, and future trends

Automation for genomics has enabled a 43-fold increase in the total finished human genomic sequence in the world in the past four years. This is the second half of a two-part, noncomprehensive review that presents an overview of different types of automation equipment used in genome sequencing. The first part of the review, published in the previous issue, focused on automated procedures used to prepare DNA for sequencing or analysis. This second part of the review presents a look at available DNA sequencers and array technology and concludes with a look at future technologies. Alternate sequencing technologies including mass spectrometry, biochips, and single molecule analysis are included in this review.

Arrayed primer extension: solid-phase four-color DNA resequencing and mutation detection technology

The technology and application of arrayed primer extension (APEX) is presented. We describe an integrated system with DNA chip and template preparation, multiplex primer extension on the array, fluorescence imaging, and data analysis. The method is based upon an array of oligonucleotides, immobilized via the 5' end on a glass surface. A patient DNA is amplified by PCR, digested enzymatically, and annealed to the immobilized primers, which promote sites for template-dependent DNA polymerase extension reactions using four unique fluorescently labeled dideoxy nucleotides. A mutation is detected by a change in the color code of the primer sites. The technology was applied to the analysis of 10 common beta-thalassemia mutations. Nine patient DNA samples, each of which carries a different mutation, and four wild-type DNA samples were correctly identified. The signal-to-noise ratio of this technology is, on the average, 40:1, which enables the identification of heterozygous mutations with a high confidence level. The APEX method can be applied to any DNA target for efficient analysis of mutations and polymorphisms.

Genomics and proteomics: the new millennium of drug discovery and development

One of the most pressing issues facing the pharmaceutical and biotechnology industry is the tremendous dropout rate of lead drug candidates. Over the last two decades, several new genomic technologies have been developed in hopes of addressing the issues of target identification and lead candidate optimization. Gene expression microarray is one of these technologies and this review describes the four main formats, which are currently available: (a) cDNA; (b) oligonucleotide; (c) electrokinetic; and (d) fiberoptic. Many of these formats have been developed with the goal of screening large numbers of genes. Recently, a high-throughput array format has been developed where a large number of samples can be assayed using arrays in parallel. In addition, focusing on gene expression may be only one avenue in preventing lead candidate failure. Proteomics or the study of protein expression may also play a role. Two-dimensional polyacrylamide gel electrophoresis (2-DE) coupled with mass spectroscopy has been the most widely accepted format to study protein expression. However, protein microarrays are now being developed and modified to a high-throughput screening format. Examples of several gene and protein expression studies as they apply to drug discovery and development are reviewed. These studies often result in large data sets. Examples of how several statistical methods (principal components analysis [PCA], clustering methods, Shannon entropy, etc.) have been applied to these data sets are also described. These newer genomic and proteomic technologies and their analysis and visualization methods have the potential to make the drug discovery and development process less costly and more efficient by aiding to select better target and lead candidates.

Oligonucleotide micro-arrays for identification of unknown mutations: how far from reality?

The present review examines critically what has been published on oligonucleotide micro-arrays, from the point of view of detection of unknown mutations. We will first demonstrate the theoretical power of this new technique, and then argue that it is experimentally realistic. However, technical difficulties remain, and the proposed solutions for controlling the hybridisation specificity and for manufacturing the micro-arrays will be reviewed. Some are promising, but a complete integration of several of these solutions must be achieved before oligonucleotide micro-arrays become a universal tool for routine detection of unknown mutations. Nevertheless, sequence specific arrays should be available in the short term for the most frequently studied genes.

From gels to chips: "minisequencing" primer extension for analysis of point mutations and single nucleotide polymorphisms

In the minisequencing primer extension reaction, a DNA polymerase is used specifically to extend a primer that anneals immediately adjacent to the nucleotide position to be analyzed with a single labeled nucleoside triphospate complementary to the nucleotide at the variant site. The reaction allows highly specific detection of point mutations and single nucleotide polymorphisms (SNPs). Because all SNPs can be analyzed with high specificity at the same reaction conditions, minisequencing is a promising reaction principle for multiplex high-throughput genotyping assays. It is also a useful tool for accurate quantitative PCR-based analysis. This review discusses the different approaches, ranging from traditional gel-based formats to multiplex detection on microarrays that have been developed and applied to minisequencing assays.

Comparison between different strategies of covalent attachment of DNA to glass surfaces to build DNA microarrays

DNA microarray is a powerful tool allowing simultaneous detection of many different target molecules present in a sample. The efficiency of the array depends mainly on the sequence of the capture probes and the way they are attached to the support. The coupling procedure must be quick, covalent, and reproducible in order to be compatible with automatic spotting devices dispensing tiny drops of liquids on the surface. We compared several coupling strategies currently used to covalently graft DNA onto a glass surface. The results indicate that fixation of aminated DNA to an aldehyde-modified surface is a choice method to build DNA microarrays. Both the coupling procedure and the hybridization efficiency have been optimized. The detection limit of human cytomegalovirus target DNA amplicons on such DNA microarrays has been estimated to be 0.01 nM by fluorescent detection.

Unravelling genetic data by arrayed primer extension

We have developed a method for arrayed primer extension (APEX) on an oligonucleotide microchip together with the 4-color fluoresence imaging equipment and supporting software, that allows analysis of the DNA sequence and changes in it. Mutation analysis of BRCA1 gene and single nucleotide polymorphism (SNP) chip for genotyping were used as a model system. Chip surface chemistry, template preparation and APEX reaction conditions were optimised and the assay is ready to be implemented in variety of DNA analysis from SNP testing to DNA resequencing.

Active microeletronic chip devices which utilize controlled electrophoretic fields for multiplex DNA hybridization and other genomic applications

Microelectronic DNA chip devices that contain planar arrays of microelectrodes have been developed for multiplex DNA hybridization and a variety of genomic research and DNA diagnostic applications. These devices are able to produce almost any desired electric field configuration on their surface. This ability to produce well-defined electric fields allows charged molecules (DNA, RNA, proteins, enzymes, antibodies, nanobeads, and even micron scale semiconductor devices) to be electrophoretically transported to or from any microlocation on the planar surface of the device. Of key importance to the device function is the permeation layer which overcoats the microelectrodes. The permeation layer is generally a porous hydrogel material that allows water molecules and small ions (Na+, CI-, etc.) to freely contact the microelectrode surface, but impedes the transport of the larger analytes (oligonucleotides, DNA, RNA, proteins, etc.). The permeation layer prevents the destruction of DNA at the active microelectrode surface, ameliorates the adverse effects of electrolysis products on the sensitive hybridization reactions, and serves as a porous support structure for attaching DNA probes and other molecules to the array. In order to maintain rapid transport of DNA molecules, facilitate hybridization, and work within constrained current and voltage ranges, low conductance buffers and various electronic pulsing scenarios have also been developed. These active microelectronic array devices allow electrophoretic fields to be used to carry out accelerated DNA hybridization reactions and to improve selectivity for single nucleotide polymorphism (SNP), short tandem repeat (STR), and point mutation analysis.

Dynamic DNA hybridization on a chip using paramagnetic beads

Dynamic DNA hybridization is presented as an approach to perform gene expression analysis. The method is advantageous because of its dynamic supplies of both DNA samples and probes. The approach was demonstrated on a microfluidic platform by incorporating paramagnetic beads as a transportable solid support. A glass chip was fabricated to allow simultaneous interrogation of eight DNA target samples by DNA probes. DNA targets were immobilized on beads via streptavidin-biotin conjugation or base pairing between oligonucleotide residues. The DNA/bead complex was introduced into the device in which hybridization took place with a complementary probe. The hybridized probe was then removed by heat denaturation to allow the DNA sample to be interrogated again by another probe with a different sequence of interest. A pneumatic pumping apparatus was constructed to transport DNA probes and other reagents into the microfluidic device while hydrostatic pumping was used for the introduction of paramagnetic beads with samples. After investigating three types of paramagnetic beads, we found Dynabeads Oligo(dT)25 best suited this application. Targets on the beads could be sequentially interrogated by probes for 12 times, and the hybridization signal was maintained within experimental variation. Demonstration of specific hybridization reactions in an array format was achieved using four synthesized DNA targets in duplicate and five probes in sequence, indicating the potential application of this approach to gene expression analysis.

Powerful tools for genetic analysis come of age

Microscopic arrays of oligonucleotides or cDNA containing up to several hundred thousand different sequences are starting to influence methodologies and paths to discovery in genomics. Gene polymorphisms and mutations can be found and gene expression measured with unprecedented speed and parallelism. The principles of this modern technology and some of the problems awaiting further study are discussed.

Hybridization of glass-tethered oligonucleotide probes to target strands preannealed with labeled auxiliary oligonucleotides

In this article we introduce a strategy of preannealing labeled auxiliary oligonucleotides to single-stranded target DNA, prior to hybridization of the DNA target to oligonucleotide arrays (genosensors) formed on glass slides for the purpose of mutation analysis. Human genomic DNA samples from normal individuals and cystic fibrosis (CF) patients (including homozygous delta F508 and heterozygous delta F508/wild type (wt) in the region examined) were used. A PCR fragment of length 138 bp (wt) or 135 bp (mutant) was produced from exon 10 in the cystic fibrosis transmembrane conductance regulator (CFTR) gene, using a new pair of polymerase chain reaction (PCR) primers. This fragment contains four of the most frequent mutation sites causing the disease (Q493X, delta I507, delta F508, and V520F). Each of these mutations was tested using a pair of nonamer (9-mer) probes covalently attached to glass slides, representing the normal (wt) and the mutant alleles. Single-stranded target DNA was isolated from the PCR fragment using one PCR primer labeled with biotin and a streptavidin minicolumn to capture the biotin-labeled strand. Prior to hybridization to the 9-mer array on a glass slide, the unlabeled target strand was preannealed with one, three, or four auxiliary oligonucleotides, at least one being labeled with 32P. As observed previously in several laboratories, the discrimination between normal (wt) and mutant alleles at each site using oligonucleotide array hybridization ranged from very good to poor, depending on the number and location of mismatches between probe and target. Terminal mismatches along the probe were difficult to discriminate, internal mismatches were more easily discriminated, and multiple mismatches were very well discriminated. An exceptionally intense hybridization signal was obtained with a 9-mer probe that hybridized contiguously (in tandem) with one auxiliary oligonucleotide preannealed to the target DNA. The increased stability is apparently caused by strong base stacking interactions between the "capture probe" and the auxiliary oligonucleotide. The presence of the delta F508 mutation was detected with this system, including discrimination between homozygous and heterozygous conditions. Base mismatch discrimination using the arrayed 9-mer probes was improved by increasing the temperature of hybridization from 15 to 25 degrees C. Auxiliary oligonucleotides, preannealed to the single-stranded template, may serve several purposes to enable a more robust genosensor-based DNA sequence analysis: 1. A convenient means of introducing label into the target DNA molecule. 2. Disruption of interfering short-range secondary structure in the region of analysis. 3. Covering up of redundant binding sites in the target strand (i.e., where a given probe has more than one complement within the target). 4. Tandem hybridization with the capture probe (providing contiguous stacking) as a means for achieving efficient mismatch discrimination at the terminal position of the capture probe (adjacent to the auxiliary oligonucleotide). By use of multiple auxiliary oligonucleotides, all of the above benefits can be derived simultaneously.

Immobilization of acrylamide-modified oligonucleotides by co-polymerization

A flexible chemistry for solid phase attachment of oligonucleotides is described. Oligonucleotides bearing 5'-terminal acrylamide modifications efficiently co-polymerize with acrylamide monomers to form thermally stable DNA-containing polyacrylamide co-polymers. Co-polymerization attachment is specific for the terminal acrylamide group. Stable probe-containing layers are easily fabricated on supports bearing exposed acrylic groups, including plastic microtiter plates and silanized glass. Attachment can be accomplished using standard polyacrylamide gel recipes and polymerization techniques. Supports having a high surface density of hybridizable oligonucleotide (approximately 200 fmol/mm2) can be produced.

Immobilization of oligonucleotides onto a glass support via disulfide bonds: A method for preparation of DNA microarrays

The covalent attachment of disulfide-modified oligonucleotides to a mercaptosilane-modified glass surface is described. This method provides an efficient and specific covalent attachment chemistry for immobilization of DNA probes onto a solid support. Glass slides were derivatized with 3-mercaptopropyl silane for attachment of 5-prime disulfide-modified oligonucleotides via disulfide bonds. An attachment density of approximately 3 x 10(5) oligonucleotides/microm2 was observed. Oligonucleotides attached by this method provided a highly efficient substrate for nucleic acid hybridization and primer extension assays. In addition, we have demonstrated patterning of multiple DNA probes on a glass surface utilizing this attachment chemistry, which allows for array densities of at least 20,000 spots/cm2.

Adapting selected nucleic acid ligands (aptamers) to biosensors

A flexible biosensor has been developed that utilizes immobilized nucleic acid aptamers to specifically detect free nonlabeled non-nucleic acid targets such as proteins. In a model system, an anti-thrombin DNA aptamer was fluorescently labeled and covalently attached to a glass support. Thrombin in solution was selectively detected by following changes in the evanescent-wave-induced fluorescence anisotropy of the immobilized aptamer. The new biosensor can detect as little as 0.7 amol of thrombin in a 140-pL interrogated volume, has a dynamic range of 3 orders of magnitude, has an inter-sensing-element measurement precision of better than 4% RSD over the range 0-200 nM, and requires less than 10 min for sample analysis. The aptamer-sensor format is generalizable and should allow sensitive, selective, and fast determination of a wide range of analytes.

Stabilizating effect of 5-nitroindole (universal base) on DNA duplexes immobilized on gel matrix

Effect of attachment of 1-(2-deoxy-beta-D-ribofuranosyl)-5-nitroindole (NIDR) to the ends of target sequence of oligonucleotides immobilized on gel micromatrix on stability of duplex formed by hybridization with DNA fragment was studied. It was shown that adjunction of NIDR to 5' as well as to 3' end results in increasing stability of duplexes although in the second case the extent of stabilization effect is essentially lower. Both 5' and 3' terminal NIDR exhibited no selectivity to the opposite base while the stabilizing effect depended dramatically on the nature of the adjacent base especially in the case of 5'-end-attached universal base. The neighborhood of purine bases decreased substantially the stabilizing effect of 5' terminal NIDR. In contrast with this, the stabilizing effect of 3' terminal NIDR was reduced only slightly by adjacent pyrimidine bases.

Molecular diagnostics of infectious diseases

Over the past several years, the development and application of molecular diagnostic techniques has initiated a revolution in the diagnosis and monitoring of infectious diseases. Microbial phenotypic characteristics, such as protein, bacteriophage, and chromatographic profiles, as well as biotyping and susceptibility testing, are used in most routine laboratories for identification and differentiation. Nucleic acid techniques, such as plasmid profiling, various methods for generating restriction fragment length polymorphisms, and the polymerase chain reaction (PCR), are making increasing inroads into clinical laboratories. PCR-based systems to detect the etiologic agents of disease directly from clinical samples, without the need for culture, have been useful in rapid detection of unculturable or fastidious microorganisms. Additionally, sequence analysis of amplified microbial DNA allows for identification and better characterization of the pathogen. Subspecies variation, identified by various techniques, has been shown to be important in the prognosis of certain diseases. Other important advances include the determination of viral load and the direct detection of genes or gene mutations responsible for drug resistance. Increased use of automation and user-friendly software makes these technologies more widely available. In all, the detection of infectious agents at the nucleic acid level represents a true synthesis of clinical chemistry and clinical microbiology techniques.

Manual manufacturing of oligonucleotide, DNA, and protein microchips

A simple procedure for manufacturing microchips containing various gel-immobilized compounds is described. A gel photopolymerization technique is introduced to produce micromatrices of polyacrylamide gel pads (25 x 25 x 20 microm and larger) separated by a hydrophobic glass surface. A pin device for the manual application of a compound in solution onto the activated polyacrylamide gel pad for immobilization is described. Oligonucleotide, DNA, and protein microchips have been produced by this method and tested by hybridization and immunoanalysis monitored with a fluorescence microscope. The effect of the lengths of the immobilized oligonucleotides and the hybridized RNA and DNA on hybridization of the oligonucleotide microchips was evaluated. This method can also be used for manufacturing microchips containing a variety of other compounds.

Hybridisation based DNA screening on peptide nucleic acid (PNA) oligomer arrays

Arrays of up to some 1000 PNA oligomers of individual sequence were synthesised on polymer membranes using a robotic device originally designed for peptide synthesis. At approximately 96%, the stepwise synthesis efficiency was comparable to standard PNA synthesis procedures. Optionally, the individual, fully deprotected PNA oligomers could be removed from the support for further use, because an enzymatically cleavable but otherwise stable linker was used. Since PNA arrays could form powerful tools for hybridisation based DNA screening assays due to some favourable features of the PNA molecules, the hybridisation behaviour of DNA probes to PNA arrays was investigated for a precise understanding of PNA-DNA interactions on solid support. Hybridisation followed the Watson-Crick base pairing rules with higher duplex stabilities than on corresponding DNA oligonucleotide sensors. Both the affinity and specificity of DNA hybridisation to the PNA oligomers depended on the hybridisation conditions more than expected. Successful discrimination between hybridisation to full complementary PNA sequences and truncated or mismatched versions was possible at salt concentrations down to 10 mM Na+and below, although an increasing tendency to unspecific DNA binding and few strong mismatch hybridisation events were observed.

Fractionation, phosphorylation and ligation on oligonucleotide microchips to enhance sequencing by hybridization

Oligonucleotide microchips are manufactured by immobilizing presynthesized oligonucleotides within 0.1 x 0.1 x 0.02 mm or 1 x 1 x 0.02 mm polyacrylamide gel pads arranged on the surface of a microscope slide. The gel pads are separated from each other by hydrophobic glass spacers and serve as a kind of 'microtest tube' of 200 pl or 20 nl volume, respectively. Fractionation of single-stranded DNAs is carried out by their hybridization with chip pads containing immobilized 10mers. DNA extracted separately from each pad is transferred onto a sequencing chip and analyzed thereon. The chip, containing a set of 10mers, was enzymatically phosphorylated, then hybridized with DNA and ligated in a site-directed manner with a contiguously stacked 5mer. Several cycles of successive hybridization-ligation of the chip-bound 10mers with different contiguously stacked 5mers and hybridized with DNA were carried out to sequence DNA containing tetranucleotide repeats. Combined use of these techniques show significant promise for sequence comparison of homologous regions in different genomes and for sequence analysis of comparatively long DNA fragments or DNA containing internal repeats.

Recent molecular advances in the approach to early lung cancer detection and intervention

Lung cancer is a major contributor to overall cancer mortality. Detecting lung cancer while it is still a localized process is a long-cherished goal for improving the outcome of this disease. Recent developments suggest that we are approaching this capability. We next have to think about how to implement a change in our approach to lung cancer management to derive the benefit of better detection capability. This is an area in which our growing understanding of lung cancer biology is providing clues on improving the inhibition of cancer progression.

Minisequencing: a specific tool for DNA analysis and diagnostics on oligonucleotide arrays

We describe a method for multiplex detection of mutations in which the solid-phase minisequencing principle is applied to an oligonucleotide array format. The mutations are detected by extending immobilized primers that anneal to their template sequences immediately adjacent to the mutant nucleotide positions with single labeled dideoxynucleoside triphosphates using a DNA polymerase. The arrays were prepared by coupling one primer per mutation to be detected on a small glass area. Genomic fragments spanning nine disease mutations, which were selected as targets for the assay, were amplified in multiplex PCR reactions and used as templates for the minisequencing reactions on the primer array. The genotypes of homozygous and heterozygous genomic DNA samples were unequivocally defined at each analyzed nucleotide position by the highly specific primer extension reaction. In a comparison to hybridization with immobilized allele-specific probes in the same assay format, the power of discrimination between homozygous and heterozygous genotypes was one order of magnitude higher using the minisequencing method. Therefore, single-nucleotide primer extension is a promising principle for future high-throughput mutation detection and genotyping using high density DNA-chip technology.

Sequence analysis by hybridization with oligonucleotide microchip: identification of beta-thalassemia mutations

Diagnostics for genetic diseases were run and sequence analysis of DNA was carried out by hybridization of RNA transcripts with oligonucleotide array microchips. Polyacrylamide gel pads (100 x 100 x 20 microm) were fixed on a glass slide of the microchip and contained allele-specific immobilized oligonucleotides (10-mers). The RNA transcripts of PCR-amplified genomic DNA were fluorescently labeled by enzymatic or chemical methods and hybridized with the microchips. The simultaneous measurement in real time of the hybridization and melting on the entire oligonucleotide array was carried out with a fluorescence microscope equipped with CCD camera. The monitoring of the hybridization specificity for duplexes with different stabilities and AT content was enhanced by its measurement at optimal, discrimination temperatures on melting curves. Microchip diagnostics were optimized by choosing the proper allele-specific oligonucleotides from among the set of overlapping oligomers. The accuracy of mutation detection can be increased by simultaneous hybridization of the microchip with two differently labeled samples and by parallel monitoring their hybridization with a multi-wavelength fluorescence microscope. The efficiency and reliability of the sequence analysis were demonstrated with diagnostics for beta-thalassemia mutations.

Rapid determination of single base mismatch mutations in DNA hybrids by direct electric field control

We have demonstrated that controlled electric fields can be used to regulate transport, concentration, hybridization, and denaturation of single- and double-stranded oligonucleotides. Discrimination among oligonucleotide hybrids with widely varying binding strengths may be attained by simple adjustment of the electric field strength. When this approach is used, electric field denaturation control allows single base pair mismatch discrimination to be carried out rapidly (<15 sec) and with high resolution. Electric field denaturation takes place at temperatures well below the melting point of the hybrids, and it may constitute a novel mechanism of DNA denaturation.

Chemical methods of DNA and RNA fluorescent labeling

Several procedures have been described for fluorescent labeling of DNA and RNA. They are based on the introduction of aldehyde groups by partial depurination of DNA or oxidation of the 3'-terminal ribonucleoside in RNA by sodium periodate. Fluorescent labels with an attached hydrazine group are efficiently coupled with the aldehyde groups and the hydrazone bonds are stabilized by reduction with sodium cyanoborohydride. Alternatively, DNA can be quantitatively split at the depurinated sites with ethylenediamine. The aldimine bond between the aldehyde group in depurinated DNA or oxidized RNA and ethylenediamine is stabilized by reduction with sodium cyanoborohydride and the primary amine group introduced at these sites is used for attachment of isothiocyanate or succinimide derivatives of fluorescent dyes. The fluorescent DNA labeling can be carried out either in solution or on a reverse phase column. These procedures provide simple, inexpensive methods of multiple DNA labeling and of introducing one fluorescent dye molecule per RNA, as well as quantitative DNA fragmentation and incorporation of one label per fragment. These methods of fluorophore attachment were shown to be efficient for use in the hybridization of labeled RNA, DNA and DNA fragments with oligonucleotide microchips.

Theoretical analysis of the kinetics of DNA hybridization with gel-immobilized oligonucleotides

A new method of DNA sequencing by hybridization using a microchip containing a set of immobilized oligonucleotides is being developed. A theoretical analysis is presented of the kinetics of DNA hybridization with deoxynucleotide molecules chemically tethered in a polyacrylamide gel layer. The analysis has shown that long-term evolution of the spatial distribution and of the amount of DNA bound in a hybridization cell is governed by "retarded diffusion," i.e., diffusion of the DNA interrupted by repeated association and dissociation with immobile oligonucleotide molecules. Retarded diffusion determines the characteristic time of establishing a final equilibrium state in a cell, i.e., the state with the maximum quantity and a uniform distribution of bound DNA. In the case of cells with the most stable, perfect duplexes, the characteristic time of retarded diffusion (which is proportional to the equilibrium binding constant and to the concentration of binding sites) can be longer than the duration of the real hybridization procedure. This conclusion is indirectly confirmed by the observation of nonuniform fluorescence of labeled DNA in perfect-match hybridization cells (brighter at the edges). For optimal discrimination of perfect duplexes from duplexes with mismatches the hybridization process should be brought to equilibrium under low-temperature nonsaturation conditions for all cells. The kinetic differences between perfect and nonperfect duplexes in the gel allow further improvement in the discrimination through additional washing at low temperature after hybridization.

Partial thermodynamic parameters for prediction stability and washing behavior of DNA duplexes immobilized on gel matrix

Earlier we showed that reported in literature nearest-neighbor thermodynamic parameters describe poorly the thermal-induced behavior of DNA duplexes immobilized in gel. Here we present a complete set of partial thermodynamic parameters for all 10 nearest-neighbor interactions specially developed for duplexes immobilized in gel. This thermodynamic library allows to predict dissociation enthalpy and free energy of DNA duplex immobilized in gel matrix from its base sequence. The predicted values are in good agreement with the experimental ones. Dissociation enthalpy and free energy are needed for such application as (i) predicting relative stability of duplexes formed by DNA with oligonucleotides immobilized in cells of gel matrix; (ii) selecting optimal conditions for hybridization experiment; (iii) predicting washing curves and washing temperatures at irreversible temperature-stepped wash of DNA out of oligonucleotide gel matrix; (iv) selecting optimal conditions for washing gel matrix.