DNA assembler, an in vivo genetic method for rapid construction of biochemical pathways

Engineering of Phytosterol-Producing Yeast Platforms for Functional Reconstitution of Downstream Biosynthetic Pathways

As essential structural molecules for plant plasma membranes, phytosterols are key intermediates for the synthesis of many downstream specialized metabolites of pharmaceutical or agricultural significance, such as brassinosteroids and withanolides. Saccharomyces cerevisiae has been widely used as an alternative producer for plant secondary metabolites. Establishment of heterologous sterol pathways in yeast, however, has been challenging due to either low efficiency or structural diversity, likely a result of crosstalk between the heterologous phytosterol and the endogenous ergosterol biosynthesis. For example, in this study, we engineered campesterol production in yeast using plant enzymes; although we were able to enhance the titer of campesterol to ∼40 mg/L by upregulating the mevalonate pathway, no conversion to downstream products was detected upon the introduction of downstream plant enzymes. Further investigations uncovered two interesting observations about sterol engineering in yeast. First, many heterologous sterols tend to be efficiently and intensively esterified in yeast, which drastically impedes the function of downstream enzymes. Second, yeast can overcome the growth deficiency caused by altered sterol metabolism through repeated culture. By employing metabolic engineering, strain evolution, fermentation engineering, and pathway reconstitution, we were able to reconstruct the multienzyme pathways for the synthesis of a set of phytosterols: campesterol (∼7 mg/L), β-sitosterol (∼2 mg/L), 22-hydroxycampesterol (∼1 mg/L), and 22-hydroxycampest-4-en-3-one (∼4 mg/L). This work identified and addressed some of the technical bottlenecks in phytosterol-derived pathway reconstitution in the baker's yeast and opens up opportunities for efficient bioproduction and metabolic pathway elucidation of this group of phytochemicals.

Effects of metabolic pathway gene copy numbers on the biosynthesis of (2S)-naringenin in Saccharomyces cerevisiae

Flavonoids have notable biological activities and have been widely used in the medicinal and chemical industries. However, single-copy integration of heterologous pathway genes limits the production of flavonoids. In this work, we designed and constructed single-step integration of multiple flavonoid (2S)-naringenin biosynthetic pathway genes in S. cerevisiae. The efficiency of the naringenin metabolic pathway gene integration into the rDNA site reached 93.7%. Subsequently, we used a high titer p-coumaric acid strain as a chassis, which eliminated feedback inhibition of tyrosine and downregulated the competitive pathway. The results indicated that increasing the supply of p-coumaric acid was effective for naringenin production. We additionally optimized the amount of donor DNA. The optimum strain produced 149.8 mg/L of (2S)-naringenin. The multi-copy integration of flavonoid pathway genes effectively improved (2S)-naringenin production in S. cerevisiae. We further analyzed the copy numbers and expression levels of essential genes (4CL and CHS) in the (2S)-naringenin metabolic pathway by qPCR. Higher copy numbers of the (2S)-naringenin metabolic pathway genes were associated with greater 4CL and CHS transcription, and the efficiency of naringenin production was higher. Therefore, multi-copy integration of genes in the (2S)-naringenin metabolic pathway was imperative in rewiring p-coumaric acid flux to enhance flavonoid production.

Advances in antibiotic drug discovery: reducing the barriers for antibiotic development

Antibiotic drug discovery has been an essential field of research since the early 1900s, but the threat from infectious bacteria has only increased over the decades because of the emergence of widespread multidrug resistance. In this review, we discuss the recent advances in natural product, computational and medicinal chemistry that have reinvigorated the field of antibiotic drug discovery while giving perspective on how easily, both in cost and in expertise, these methods can be implemented by other researchers with the goal of increasing the number of scientists contributing to this public health crisis.

Genetic Engineering and Synthetic Genomics in Yeast to Understand Life and Boost Biotechnology

The field of genetic engineering was born in 1973 with the "construction of biologically functional bacterial plasmids in vitro". Since then, a vast number of technologies have been developed allowing large-scale reading and writing of DNA, as well as tools for complex modifications and alterations of the genetic code. Natural genomes can be seen as software version 1.0; synthetic genomics aims to rewrite this software with "build to understand" and "build to apply" philosophies. One of the predominant model organisms is the baker's yeast Saccharomyces cerevisiae. Its importance ranges from ancient biotechnologies such as baking and brewing, to high-end valuable compound synthesis on industrial scales. This tiny sugar fungus contributed greatly to enabling humankind to reach its current development status. This review discusses recent developments in the field of genetic engineering for budding yeast S. cerevisiae, and its application in biotechnology. The article highlights advances from Sc1.0 to the developments in synthetic genomics paving the way towards Sc2.0. With the synthetic genome of Sc2.0 nearing completion, the article also aims to propose perspectives for potential Sc3.0 and subsequent versions as well as its implications for basic and applied research.

Innovative Tools and Strategies for Optimizing Yeast Cell Factories

Metabolic engineering (ME) aims to develop efficient microbial cell factories that can produce a wide variety of valuable compounds, ideally at the highest yield and from various feedstocks. We summarize recent developments in ME methods for tailoring different yeast cell factories (YCFs). In particular, we highlight the most timely and cutting-edge molecular tools and strategies for biosynthetic pathway optimization (including genome-editing tools), combinatorial transcriptional and post-transcriptional engineering (cis/trans regulators), dynamic control of metabolic fluxes (e.g., rewiring of primary metabolism), and spatial reconfiguration of metabolic pathways. Finally, we discuss challenges and perspectives for adaptive laboratory evolution (ALE) of yeast to advance ME of microbial cell factories.

In vivo site-directed recombination (SDR): An efficient tool to reveal beneficial epistasis

Employing the homologous DNA recombination apparatus of Saccharomyces cerevisiae as a dynamic engineering tool allows mutant libraries to be constructed in a rapid and efficient manner. Among the plethora of methods based on the yeast's splicing apparatus, site-directed recombination (SDR) is often useful to gather information from mutations discovered in directed evolution experiments. When using SDR, the target gene is divided in segments carrying the selected mutation positions so that the resulting PCR fragments show 50% mutated and 50% wild type residues at the codons of interest. The PCR products are then assembled and cloned into yeast through one-pot transformations with the help of homologous overlapping flanking regions. By screening SDR libraries, the effect of the mutations/reversions at the different positions can be rapidly sorted out in a combinatorial manner. As such, SDR can serve as the `final polishing step´ in a laboratory evolution campaign, revealing beneficial synergies among mutations and/or overriding deleterious mutations. In practice, using SDR it is possible to discern between beneficial and negative epistasis, that is, it should be possible to collect positive synergistic mutations while discarding detrimental substitutions that affect the enzyme's fitness.

A synthetic biosensor to detect peroxisomal acetyl-CoA concentration for compartmentalized metabolic engineering

Background

Sub-cellular compartmentalization is used by cells to create favorable microenvironments for various metabolic reactions. These compartments concentrate enzymes, separate competing metabolic reactions, and isolate toxic intermediates. Such advantages have been recently harnessed by metabolic engineers to improve the production of various high-value chemicals via compartmentalized metabolic engineering. However, measuring sub-cellular concentrations of key metabolites represents a grand challenge for compartmentalized metabolic engineering.

Methods

To this end, we developed a synthetic biosensor to measure a key metabolite, acetyl-CoA, in a representative compartment of yeast, the peroxisome. This synthetic biosensor uses enzyme re-localization via PTS1 signal peptides to construct a metabolic pathway in the peroxisome which converts acetyl-CoA to polyhydroxybutyrate (PHB) via three enzymes. The PHB is then quantified by HPLC.

Results

The biosensor demonstrated the difference in relative peroxisomal acetyl-CoA availability under various culture conditions and was also applied to screening a library of single knockout yeast mutants. The screening identified several mutants with drastically reduced peroxisomal acetyl-CoA and one with potentially increased levels. We expect our synthetic biosensors can be widely used to investigate sub-cellular metabolism and facilitate the “design-build-test” cycle of compartmentalized metabolic engineering.

Use YeastFab to Construct Genetic Parts and Multicomponent Pathways for Metabolic Engineering

Budding yeast, as a eukaryotic model organism, has well-defined genetic information and a highly efficient recombination system, making it a good host to produce exogenous chemicals. Since most metabolic pathways require multiple genes to function in coordination, it is usually laborious and time-consuming to construct a working pathway. To facilitate the construction and optimization of multicomponent exogenous pathways in yeast, we recently developed a method called YeastFab Assembly, which includes three steps: (1) make standard and reusable genetic parts, (2) construct transcription units from characterized parts, and (3) assemble a complete pathway. Here we describe a detailed protocol of this method.

Increased RNA production in Saccharomyces cerevisiae by simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1

Ribonucleic acid (RNA) and its degradation products are widely used in the food industry. In this study, we constructed Saccharomyces cerevisiae mutants with FHL1, IFH1, SSF1, and SSF2 overexpression and HRP1 deletion, individually to evaluate the effect on RNA production. The RNA content of recombinant strains W303-1a-FHL1, W303-1a-SSF2, and W303-1a-ΔHRP1 was increased by 14.94%, 24.4%, and 19.36%, respectively, compared with the RNA content of the parent strain. However, W303-1a-IFH1 and W303-1a-SSF1 showed no significant change in RNA production compared with the parent strain. IFH1 and FHL1 encode Ifh1p and Fhl1p, respectively, which combine to form a complex that plays a key role in the transcription of the ribosomal protein (RP) gene. Ssf2p, encoded by SSF2, plays an important role in ribosome biosynthesis and Hrp1p is a negative regulator of cell growth in S. cerevisiae. Subsequently, a high RNA production strain, W112, was constructed by simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1. The RNA content of W112 was 38.8% higher than the parent strain. The growth performance, RP transcription levels, and rRNA content were also investigated in the recombinant strains. This study provides a new strategy for the construction of S. cerevisiae strains containing large amounts of RNA, and it will make a significant contribution to progress in the nucleic acid industry. KEY POINTS: • Simultaneously overexpressing FHL1, IFH1, and SSF2 and deleting HRP1 can significantly increases RNA production. • The production of RNA increased by 38.8% in Saccharomyces cerevisiae. • The cell size and growth rate of the strains with higher RNA content also increased.

Leveraging the Hermes Transposon to Accelerate the Development of Nonconventional Yeast-based Microbial Cell Factories

We broadened the usage of DNA transposon technology by demonstrating its capacity for the rapid creation of expression libraries for long biochemical pathways, which is beyond the classical application of building genome-scale knockout libraries in yeasts. This strategy efficiently leverages the readily available fine-tuning impact provided by the diverse transcriptional environment surrounding each random integration locus. We benchmark the transposon-mediated integration against the nonhomologous end joining-mediated strategy. The latter strategy was demonstrated for achieving pathway random integration in other yeasts but is associated with a high false-positive rate in the absence of a high-throughput screening method. Our key innovation of a nonreplicable circular DNA platform increased the possibility of identifying top-producing variants to 97%. Compared to the classical DNA transposition protocol, the design of a nonreplicable circular DNA skipped the step of counter-selection for plasmid removal and thus not only reduced the time required for the step of library creation from 10 to 5 d but also efficiently removed the "transposition escapers", which undesirably represented almost 80% of the entire population as false positives. Using one endogenous product (i.e., shikimate) and one heterologous product (i.e., (S)-norcoclaurine) as examples, we presented a streamlined procedure to rapidly identify high-producing variants with titers significantly higher than the reported data in the literature. We selected Scheffersomyces stipitis, a representative nonconventional yeast, as a demo, but the strategy can be generalized to other nonconventional yeasts. This new exploration of transposon technology, therefore, adds a highly versatile tool to accelerate the development of novel species as microbial cell factories for producing value-added chemicals.

A yeast platform for high-level synthesis of tetrahydroisoquinoline alkaloids

The tetrahydroisoquinoline (THIQ) moiety is a privileged substructure of many bioactive natural products and semi-synthetic analogs. Plants manufacture more than 3,000 THIQ alkaloids, including the opioids morphine and codeine. While microbial species have been engineered to synthesize a few compounds from the benzylisoquinoline alkaloid (BIA) family of THIQs, low product titers impede industrial viability and limit access to the full chemical space. Here we report a yeast THIQ platform by increasing production of the central BIA intermediate (S)-reticuline to 4.6 g L⁻¹, a 57,000-fold improvement over our first-generation strain. We show that gains in BIA output coincide with the formation of several substituted THIQs derived from amino acid catabolism. We use these insights to repurpose the Ehrlich pathway and synthesize an array of THIQ structures. This work provides a blueprint for building diverse alkaloid scaffolds and enables the targeted overproduction of thousands of THIQ products, including natural and semi-synthetic opioids.

Plants synthesize more than 3000 tetrahydroisoquinoline (THIQ) alkaloids, but only a few of them have been produced by engineered microbes and titers are very low. Here, the authors increase (S)-reticuline titer to 4.6 g/L and repurpose the yeast Ehrlich pathway to synthesize a diverse array of THIQ scaffolds.

Towards oilcane: Engineering hyperaccumulation of triacylglycerol into sugarcane stems

Metabolic engineering to divert carbon flux from sucrose to oil in high biomass crop like sugarcane is an emerging strategy to boost lipid yields per hectare for biodiesel production. Sugarcane stems comprise more than 70% of the crops' biomass and can accumulate sucrose in excess of 20% of their extracted juice. The energy content of oils in the form of triacylglycerol (TAG) is more than twofold that of carbohydrates. Here, we report a step change in TAG accumulation in sugarcane stem tissues achieving an average of 4.3% of their dry weight (DW) in replicated greenhouse experiments by multigene engineering. The metabolic engineering included constitutive co‐expression of wrinkled1; diacylglycerol acyltransferase1‐2; cysteine‐oleosin; and ribonucleic acid interference‐suppression of sugar‐dependent1. The TAG content in leaf tissue was also elevated by more than 400‐fold compared to non‐engineered sugarcane to an average of 8.0% of the DW and the amount of total fatty acids reached about 13% of the DW. With increasing TAG accumulation an increase of 18:1 unsaturated fatty acids was observed at the expense of 16:0 and 18:0 saturated fatty acids. Total biomass accumulation, soluble lignin, Brix and juice content were significantly reduced in the TAG hyperaccumulating sugarcane lines. Overcoming this yield drag by engineering lipid accumulation into late stem development will be critical to exceed lipid yields of current oilseed crops.

Efficient Multiplex Genome Editing in Streptomyces via Engineered CRISPR-Cas12a Systems

Streptomyces strains produce a great number of valuable natural products. With the development of genome sequencing, a vast number of biosynthetic gene clusters with high potential for use in the discovery of valuable clinical drugs have been revealed. Therefore, emerging needs for tools to manipulate these biosynthetic pathways are presented. Although the clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas 9) system has exhibited great capabilities for gene editing in multiple Streptomyces strains, it has failed to work in some newly discovered strains and some important industrial strains. Additionally, the protospacer adjacent motif (PAM) recognition scope of this system sometimes limits its applications for generating precise site mutations and insertions. Here, we developed three efficient CRISPR-FnCas12a systems for multiplex genome editing in several Streptomyces strains. Each system exhibited advantages for different applications. The CRISPR-FnCas12a1 system was efficiently applied in the industrial strain Streptomyces hygroscopicus, in which SpCas9 does not work well. The CRISPR-FnCas12a2 system was used to delete large fragments ranging from 21.4 to 128 kb. Additionally, the CRISPR-FnCas12a3 system employing the engineered FnCas12a mutant EP16, which recognizes a broad spectrum of PAM sequences, was used to precisely perform site mutations and insertions. The CRISPR-FnCas12a3 system addressed the limitation of TTN PAM recognition in Streptomyces strains with high GC contents. In summary, all the CRISPR-FnCas12a systems developed in this study are powerful tools for precise and multiplex genome editing in Streptomyces strains.

Efficient, D-glucose insensitive, growth on D-xylose by an evolutionary engineered Saccharomyces cerevisiae strain

Optimizing D-xylose consumption in Saccharomyces cerevisiae is essential for cost-efficient cellulosic bioethanol production. An evolutionary engineering approach was used to elevate D-xylose consumption in a xylose-fermenting S. cerevisiae strain carrying the D-xylose-specific N367I mutation in the endogenous chimeric Hxt36 hexose transporter. This strain carries a quadruple hexokinase deletion that prevents glucose utilization, and allows for selection of improved growth rates on D-xylose in the presence of high D-glucose concentrations. Evolutionary engineering resulted in D-glucose-insensitive growth and consumption of D-xylose, which could be attributed to glucose insensitive D-xylose uptake via a novel chimeric Hxt37 N367I transporter that emerged from a fusion of the HXT36 and HXT7 genes, and a down regulation of a set of Hxt transporters that mediate glucose sensitive xylose transport. RNA sequencing revealed the downregulation of HXT1 and HXT2 which, together with the deletion of HXT7, resulted in a 21% reduction of the expression of all plasma membrane transporters genes. Morphological analysis showed an increased cell size and corresponding increased cell surface area of the evolved strain, which could be attributed to genome duplication. Mixed strain fermentation of the D-xylose-consuming strain DS71054-evo6 with the D-glucose consuming CEN.PK113-7D strain resulted in decreased residual sugar concentrations and improved ethanol production yields compared to a strain which sequentially consumes D-glucose and D-xylose.

Efficient and Reproducible Multigene Expression after Single-Step Transfection Using Improved BAC Transgenesis and Engineering Toolkit

Achieving stable expression of a single transgene in mammalian cells remains challenging; even more challenging is obtaining simultaneous stable expression of multiple transgenes at reproducible, relative expression levels. Previously, we attained copy-number-dependent, chromosome-position-independent expression of reporter minigenes by embedding them within a BAC "scaffold" containing the mouse Msh3-Dhfr locus (DHFR BAC). Here, we extend this "BAC TG-EMBED" approach. First, we report a toolkit of endogenous promoters capable of driving transgene expression over a 0.01- to 5-fold expression range relative to the CMV promoter, allowing fine-tuning of relative expression levels of multiple reporter genes. Second, we demonstrate little variation in expression level and long-term expression stability of a reporter gene embedded in BACs containing either transcriptionally active or inactive genomic regions, making the choice of BAC scaffolds more flexible. Third, we present a novel BAC assembly scheme, "BAC-MAGIC", for inserting multiple transgenes into BAC scaffolds, which is much more time-efficient than traditional galK-based methods. As a proof-of-principle for our improved BAC TG-EMBED toolkit, we simultaneously fluorescently labeled three nuclear compartments at reproducible, relative intensity levels in 94% of stable clones after a single transfection using a DHFR BAC scaffold containing 4 transgenes assembled with BAC-MAGIC. Our extended BAC TG-EMBED toolkit and BAC-MAGIC method provide an efficient, versatile platform for stable simultaneous expression of multiple transgenes at reproducible, relative levels.

An artificial chromosome ylAC enables efficient assembly of multiple genes in Yarrowia lipolytica for biomanufacturing

The efficient use of the yeast Yarrowia lipolytica as a cell factory is hampered by the lack of powerful genetic engineering tools dedicated for the assembly of large DNA fragments and the robust expression of multiple genes. Here we describe the design and construction of artificial chromosomes (ylAC) that allow easy and efficient assembly of genes and chromosomal elements. We show that metabolic pathways can be rapidly constructed by various assembly of multiple genes in vivo into a complete, independent and linear supplementary chromosome with a yield over 90%. Additionally, our results reveal that ylAC can be genetically maintained over multiple generations either under selective conditions or, without selective pressure, using an essential gene as the selection marker. Overall, the ylACs reported herein are game-changing technology for Y. lipolytica, opening myriad possibilities, including enzyme screening, genome studies and the use of this yeast as a previous unutilized bio-manufacturing platform.

Zhong-peng Guo et al. develop artificial chromosomes (ylAC) that allow easy and efficient assembly of multiple genes in Yarrowia lipolytica, a yeast strain commonly used for synthetic biology. ylAC provides an improved bio-manufacturing platform that is potentially useful for food, pharmaceutical, and environmental industries.

Modulating Pathway Performance by Perturbing Local Genetic Context

Combinatorial engineering is a preferred strategy for attaining optimal pathway performance. Previous endeavors have been concentrated on regulatory elements (e.g., promoters, terminators, and ribosomal binding sites) and/or open reading frames. Accumulating evidence indicates that noncoding DNA sequences flanking a transcriptional unit on the genome strongly impact gene expression. Here, we sought to mimic the effect imposed on expression cassettes by the genome. We created variants of the model yeast Saccharomyces cerevisiae with significantly improved fluorescence or cellobiose consumption rate by randomizing the sequences adjacent to the GFP expression cassette or the cellobiose-utilization pathway, respectively. Interestingly, nucleotide specificity was observed at certain positions and showed to be essential for achieving optimal cellobiose assimilation. Further characterization suggested that the modulation effects of the short sequences flanking the expression cassettes could be potentially mediated by remodeling DNA packaging and/or recruiting transcription factors. Collectively, these results indicate that the often-overlooked contiguous DNA sequences can be exploited to rapidly achieve balanced pathway expression, and the corresponding approach could be easily stacked with other combinatorial engineering strategies.

Guide RNA Engineering Enables Dual Purpose CRISPR-Cpf1 for Simultaneous Gene Editing and Gene Regulation in Yarrowia lipolytica

Yarrowia lipolytica has fast become a biotechnologically significant yeast for its ability to accumulate lipids to high levels. While there exists a suite of synthetic biology tools for genetic engineering in this yeast, there is a need for multipurposed tools for rapid strain generation. Here, we describe a dual purpose CRISPR-Cpf1 system that is capable of simultaneous gene disruption and gene regulation. Truncating guide RNA spacer length to 16 nt inhibited nuclease activity but not binding to the target loci, enabling gene activation and repression with Cpf1-fused transcriptional regulators. Gene repression was demonstrated using a Cpf1-Mxi1 fusion achieving a 7-fold reduction in mRNA, while CRISPR-activation with Cpf1-VPR increased hrGFP expression by 10-fold. High efficiency disruptions were achieved with gRNAs 23-25 bp in length, and efficiency and repression levels were maintained with multiplexed expression of truncated and full-length gRNAs. The developed CRISPR-Cpf1 system should prove useful in metabolic engineering, genome wide screening, and functional genomics studies.

A mass spectrometry-based high-throughput screening method for engineering fatty acid synthases with improved production of medium-chain fatty acids

Microbial cell factories have been extensively engineered to produce free fatty acids (FFAs) as key components of crucial nutrients, soaps, industrial chemicals, and fuels. However, our ability to control the composition of microbially synthesized FFAs is still limited, particularly, for producing medium-chain fatty acids (MCFAs). This is mainly due to the lack of high-throughput approaches for FFA analysis to engineer enzymes with desirable product specificity. Here we report a mass spectrometry (MS)-based method for rapid profiling of MCFAs in Saccharomyces cerevisiae by using membrane lipids as a proxy. In particular, matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) MS was used to detect shorter acyl chain phosphatidylcholines from membrane lipids and a higher m/z peak ratio at 730 and 758 was used as an indication for improved MCFA production. This colony-based method can be performed at a rate of ~2 s per sample, representing a substantial improvement over gas chromatography-MS (typically >30 min per sample) as the gold standard method for FFA detection. To demonstrate the power of this method, we performed site-saturation mutagenesis of the yeast fatty acid synthase and identified nine missense mutations that resulted in improved MCFA production relative to the wild-type strain. Colony-based MALDI-ToF MS screening provides an effective approach for engineering microbial fatty acid compositions in a high-throughput manner.

Genomic Considerations for the Modification of Saccharomyces cerevisiae for Biofuel and Metabolite Biosynthesis

The growing global population and developing world has put a strain on non-renewable natural resources, such as fuels. The shift to renewable sources will, thus, help meet demands, often through the modification of existing biosynthetic pathways or the introduction of novel pathways into non-native species. There are several useful biosynthetic pathways endogenous to organisms that are not conducive for the scale-up necessary for industrial use. The use of genetic and synthetic biological approaches to engineer these pathways in non-native organisms can help ameliorate these challenges. The budding yeast Saccharomyces cerevisiae offers several advantages for genetic engineering for this purpose due to its widespread use as a model system studied by many researchers. The focus of this review is to present a primer on understanding genomic considerations prior to genetic modification and manipulation of S. cerevisiae. The choice of a site for genetic manipulation can have broad implications on transcription throughout a region and this review will present the current understanding of position effects on transcription.

Self-Redirection of Metabolic Flux Toward Squalene and Ethanol Pathways by Engineered Yeast

We have previously reported that squalene overproducing yeast self-downregulate the expression of the ethanol pathway (non-essential pathway) to divert the metabolic flux to the squalene pathway. In this study, the effect of co-production of squalene and ethanol on other non-essential pathways (fusel alcohol pathway, FA) of Saccharomyces cerevisiae was evaluated. However, before that, 13 constitutive promoters, like IRA1p, PET9p, RHO1p, CMD1p, ATP16p, USA3p,RER2p, COQ1p, RIM1p, GRS1p, MAK5p, and BRN1p, were engineered using transcription factor bindings sites from strong promoters HHF2p (−300 to −669 bp) and TEF1p (−300 to −579 bp), and employed to co-overexpress squalene and ethanol pathways in S. cerevisiae. The FSE strain overexpressing the key genes of the squalene pathway accumulated 56.20 mg/L squalene, a 16.43-fold higher than wild type strain (WS). The biogenesis of lipid droplets was stimulated by overexpressing DGA1 and produced 106 mg/L squalene in the FSE strain. AFT1p and CTR1p repressible promoters were also characterized and employed to downregulate the expression of ERG1, which also enhanced the production of squalene in FSE strain up to 42.85- (148.67 mg/L) and 73.49-fold (255.11 mg/L) respectively. The FSE strain was further engineered by overexpressing the key genes of the ethanol pathway and produced 40.2 mg/mL ethanol in the FSE1 strain, 3.23-fold higher than the WS strain. The FSE1 strain also self-downregulated the expression of the FA pathway up to 73.9%, perhaps by downregulating the expression of GCN4 by 2.24-fold. We demonstrate the successful tuning of the strength of yeast promoters and highest coproduction of squalene and ethanol in yeast, and present GCN4 as a novel metabolic regulator that can be manipulated to divert the metabolic flux from the non-essential pathway to engineered pathways.

A genetic toolbox for metabolic engineering of Issatchenkia orientalis

The nonconventional yeast Issatchenkia orientalis can grow under highly acidic conditions and has been explored for production of various organic acids. However, its broader application is hampered by the lack of efficient genetic tools to enable sophisticated metabolic manipulations. We recently constructed an episomal plasmid based on the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) in I. orientalis and developed a CRISPR/Cas9 system for multiplexed gene deletions. Here we report three additional genetic tools including: (1) identification of a 0.8 kb centromere-like (CEN-L) sequence from the I. orientalis genome by using bioinformatics and functional screening; (2) discovery and characterization of a set of constitutive promoters and terminators under different culture conditions by using RNA-Seq analysis and a fluorescent reporter; and (3) development of a rapid and efficient in vivo DNA assembly method in I. orientalis, which exhibited ~100% fidelity when assembling a 7 kb-plasmid from seven DNA fragments ranging from 0.7 kb to 1.7 kb. As proof of concept, we used these genetic tools to rapidly construct a functional xylose utilization pathway in I. orientalis.

High-copy genome integration of 2,3-butanediol biosynthesis pathway in Saccharomyces cerevisiae via in vivo DNA assembly and replicative CRISPR-Cas9 mediated delta integration

CRISPR Cas9 system is becoming an emerging genome-editing platform and has been widely used for multiplex genome engineering of Saccharomyces cerevisiae. In this study, we developed a novel replicative and integrative CRISPR Cas9 genome-editing platform for large DNA construct in vivo assembly, replication, and high-copy genome integration in Saccharomyces cerevisiae. It harnessed advantages of autonomous replicative sequence in S. cerevisiae, in vivo DNA assembly, CRISPR Cas9, and delta integration. Enhanced green fluorescent protein was used as a marker to confirm large DNA construct in vivo assembly and genome integration. Based on this platform, an efficient 2,3- BDO producing yeast strain was rapidly constructed with up to 25-copy genome integration of 2,3-BDO biosynthesis pathway. Further strain engineering was conducted by multiplex disruption of ADH1, PDC1, PDC5 and MTH1 using a 2μ-based replicative CRISPR Cas9 plasmid containing donor DNAs. As a result, the 2,3-BDO titer was improved by 3.9 folds compared to that obtained by the initially engineered yeast and 50.5 g/L 2,3-BDO was produced by the final engineered yeast strain 36aS5-CFBDO in fed-batch fermentation without strain evolution and process optimization. This study demonstrated that the new replicative and integrative CRISPR Cas9 genome-editing platform was promising in generating an efficient 2,3-BDO-producing S. cerevisiae strain.

Heterologous production of the epoxycarotenoid violaxanthin in Saccharomyces cerevisiae

Microbial production of carotenoids has mainly focused towards a few products, such as β-carotene, lycopene and astaxanthin. However, other less explored carotenoids, like violaxanthin, have also shown unique properties and promissory applications. Violaxanthin is a plant-derived epoxidated carotenoid with strong antioxidant activity and a key precursor of valuable compounds, such as fucoxanthin and β-damascenone. In this study, we report for the first time the heterologous production of epoxycarotenoids in yeast. We engineered the yeast Saccharomyces cerevisiae following multi-level strategies for the efficient accumulation of violaxanthin. Starting from a β-carotenogenic yeast strain, we first evaluated the performance of several β-carotene hydroxylases (CrtZ), and zeaxanthin epoxidases (ZEP) from different species, together with their respective N-terminal truncated variants. The combined expression of CrtZ from Pantoea ananatis and truncated ZEP of Haematococcus lacustris showed the best performance and led to a yield of 1.6 mg/g_DCW of violaxanthin. Further improvement of the epoxidase activity was achieved by promoting the transfer of reducing equivalents to ZEP by expressing several redox partner systems. The co-expression of the plant truncated ferredoxin-3, and truncated root ferredoxin oxidoreductase-1 resulted in a 2.2-fold increase in violaxanthin yield (3.2 mg/g_DCW). Finally, increasing gene copy number of carotenogenic genes enabled reaching a final production of 7.3 mg/g_DCW in shake flask cultures and batch bioreactors, which is the highest yield of microbially produced violaxanthin reported to date.

Genomic integration of unclonable gene expression cassettes in Saccharomyces cerevisiae using rapid cloning-free workflows

Most DNA assembly methods require bacterial amplification steps, which restrict its application to genes that can be cloned in the bacterial host without significant toxic effects. However, genes that cannot be cloned in bacteria do not necessarily exert toxic effects on the final host. In order to tackle this issue, we adapted two DNA assembly workflows for rapid, cloning-free construction and genomic integration of expression cassettes in Saccharomyces cerevisiae. One method is based on a modified Gibson assembly, while the other relies on a direct assembly and integration of linear PCR products by yeast homologous recombination. The methods require few simple experimental steps, and their performance was evaluated for the assembly and integration of unclonable zeaxanthin epoxidase expression cassettes in yeast. Results showed that up to 95% integration efficiency can be reached with minimal experimental effort. The presented workflows can be employed as rapid gene integration tools for yeast, especially tailored for integrating unclonable genes.

Plant Synthetic Metabolic Engineering for Enhancing Crop Nutritional Quality

Nutrient deficiencies in crops are a serious threat to human health, especially for populations in poor areas. To overcome this problem, the development of crops with nutrient-enhanced traits is imperative. Biofortification of crops to improve nutritional quality helps combat nutrient deficiencies by increasing the levels of specific nutrient components. Compared with agronomic practices and conventional plant breeding, plant metabolic engineering and synthetic biology strategies are more effective and accurate in synthesizing specific micronutrients, phytonutrients, and/or bioactive components in crops. In this review, we discuss recent progress in the field of plant synthetic metabolic engineering, specifically in terms of research strategies of multigene stacking tools and engineering complex metabolic pathways, with a focus on improving traits related to micronutrients, phytonutrients, and bioactive components. Advances and innovations in plant synthetic metabolic engineering would facilitate the development of nutrient-enriched crops to meet the nutritional needs of humans.

Improved simultaneous co-fermentation of glucose and xylose by Saccharomyces cerevisiae for efficient lignocellulosic biorefinery

BACKGROUND

Lignocellulosic biorefinery offers economical and sustainable production of fuels and chemicals. Saccharomyces cerevisiae, a promising industrial host for biorefinery, has been intensively developed to expand its product profile. However, the sequential and slow conversion of xylose into target products remains one of the main challenges for realizing efficient industrial lignocellulosic biorefinery.

RESULTS

In this study, we developed a powerful mixed-sugar co-fermenting strain of S. cerevisiae, XUSEA, with improved xylose conversion capacity during simultaneous glucose/xylose co-fermentation. To reinforce xylose catabolism, the overexpression target in the pentose phosphate pathway was selected using a DNA assembler method and overexpressed increasing xylose consumption and ethanol production by twofold. The performance of the newly engineered strain with improved xylose catabolism was further boosted by elevating fermentation temperature and thus significantly reduced the co-fermentation time by half. Through combined efforts of reinforcing the pathway of xylose catabolism and elevating the fermentation temperature, XUSEA achieved simultaneous co-fermentation of lignocellulosic hydrolysates, composed of 39.6 g L^-1 glucose and 23.1 g L^-1 xylose, within 24 h producing 30.1 g L^-1 ethanol with a yield of 0.48 g g^-1.

CONCLUSIONS

Owing to its superior co-fermentation performance and ability for further engineering, XUSEA has potential as a platform in a lignocellulosic biorefinery toward realizing a more economical and sustainable process for large-scale bioethanol production.

Rational engineering of the Trichoderma reesei RUT-C30 strain into an industrially relevant platform for cellulase production

BACKGROUND

The path for the development of hypersecreting strains of Trichoderma reesei capable of producing industrially relevant enzyme titers remains elusive despite over 70 years of research and industrial utilization. Herein, we describe the rational engineering of the publicly available T. reesei RUT-C30 strain and a customized process for cellulase production based on agroindustrial by-products.

RESULTS

A CRISPR/Cas9 system was used to introduce six genetic modifications in RUT-C30. Implemented changes included the constitutive expression of a mutated allele of the cellulase master regulator XYR1, the expression of two heterologous enzymes, the β-glucosidase CEL3A from Talaromyces emersonii and the invertase SUC1 from Aspergillus niger, and the deletion of genes encoding the cellulase repressor ACE1 and the extracellular proteases SLP1 and PEP1. These alterations resulted in a remarkable increase of protein secretion rates by RUT-C30 and amended its well described β-glucosidase deficiency while enabling the utilization of sucrose and eliminating the requirement of inducing sugars for enzyme production. With a developed sugarcane molasses-based bioprocess, the engineered strain reached an extracellular protein titer of 80.6 g L^-1 (0.24 g L^-1 h^-1), which is the highest experimentally supported titer so far reported for T. reesei. The produced enzyme cocktail displayed increased levels of cellulase and hemicellulase activities, with particularly large increments being observed for the specific activities of β-glucosidase (72-fold) and xylanase (42-fold). Notably, it also exhibited a saccharification efficiency similar to that of a commercially available cellulase preparation in the deconstruction of industrially pretreated sugarcane straw.

CONCLUSION

This work demonstrates the rational steps for the development of a cellulase hyperproducing strain from a well-characterized genetic background available in the public domain, the RUT-C30, associated with an industrially relevant bioprocess, paving new perspectives for Trichoderma research on cellulase production.

Overexpression of the transcription factor HAC1 improves nerolidol production in engineered yeast

Increasing the metabolic flux of the mevalonate pathway, reducing the metabolic flux of competing pathway and utilizing the diauxie-inducible system constructed by GAL promoters are strategies commonly used in yeast metabolic engineering for the production of terpenoids. Using these strategies, we constructed a series of yeast strains with a strengthened mevalonate pathway and finally produced 336.5 mg/L nerolidol in a shake flask. The spliced HAC1 mRNA assay indicated that the unfolded protein response (UPR) occurred in the strains that we constructed. UPR strains exhibited the low transcriptional activities of GAL1 promoter. HAC1-overexpressing strain exhibited dramatically enhanced transcriptional activity of GAL1 promoter at 72 h of fermentation in flasks. HAC1 overexpression also increased the nerolidol titer by 47.7 %, reaching 497.0 mg/L and increased cell vitality. RNA-seq showed that the genes whose transcription responded to HAC1-overexpression were involved in the regulation of monocarboxylic acid metabolic processes and cellular amino acid biosynthetic process, indicating that the metabolic regulation may be part of the reason of the improved nerolidol synthesis. Our findings enrich the knowledge of the relationship between the construction of sesquiterpene-producing cell factories and UPR regulation. This study provides an effective strategy for sesquiterpene production in yeast.

Promoter engineering strategies for the overproduction of valuable metabolites in microbes

Promoter engineering is an enabling technology in metabolic engineering and synthetic biology. As an indispensable part of synthetic biology, the promoter is a key factor in regulating genetic circuits and in coordinating multi-gene biosynthetic pathways. In this review, we summarized the recent progresses in promoter engineering in microbes. Specifically, the endogenous promoters are firstly discussed, followed by the statement of the influence of nucleotides exchange on the strength of promoters explored by site-selective mutagenesis. We then introduced the promoter libraries with a wide range of strength, which are constructed focusing on core promoter regions and upstream activating sequences by rational designs. Finally, the application of promoter libraries in the optimization of multi-gene metabolic pathways for high-yield production of metabolites was illustrated with a couple of recent examples.

Free fatty acids promote transformation efficiency of yeast

High transformation efficiency is essential in genetic engineering for functional metabolic analysis and cell factory construction, in particular in construction of long biosynthetic pathways with multiple genes. Here, we found that free fatty acid (FFA)-overproducing strain showed higher transformation efficiency in Saccharomyces cerevisiae. We then verified that external supplementation of FFAs, to the culture media for competent cell preparation, improved yeast transformation efficiency significantly. Among all tested FFAs, 0.5 g/L C16:0 FFA worked best on promoting transformation of S. cerevisiae and Komagataella phaffii (previously named as Pichia pastoris). Furthermore, C16:0 FFA improved the assembly efficiency of multiple DNA fragments into large plasmids and genome by 100%, which will facilitate the construction and optimization of multigene-containing long pathways.

Alpha-Terpineol production from an engineered Saccharomyces cerevisiae cell factory

Background

Alpha-Terpineol (α-Terpineol), a C₁₀ monoterpenoid alcohol, is widely used in the cosmetic and pharmaceutical industries. Construction Saccharomyces cerevisiae cell factories for producing monoterpenes offers a promising means to substitute chemical synthesis or phytoextraction.

Results

α-Terpineol was produced by expressing the truncated α-Terpineol synthase (tVvTS) from Vitis vinifera in S. cerevisiae. The α-Terpineol titer was increased to 0.83 mg/L with overexpression of the rate-limiting genes tHMG1, IDI1 and ERG20^F96W-N127W. A GSGSGSGSGS linker was applied to fuse ERG20^F96W-N127W with tVvTS, and expressing the fusion protein increased the α-Terpineol production by 2.87-fold to 2.39 mg/L when compared with the parental strain. In addition, we found that farnesyl diphosphate (FPP) accumulation by down-regulation of ERG9 expression and deletion of LPP1 and DPP1 did not improve α-Terpineol production. Therefore, ERG9 was overexpressed and the α-Terpineol titer was further increased to 3.32 mg/L. The best α-Terpineol producing strain LCB08 was then used for batch and fed-batch fermentation in a 5 L bioreactor, and the production of α-Terpineol was ultimately improved to 21.88 mg/L.

Conclusions

An efficient α-Terpineol production cell factory was constructed by engineering the S. cerevisiae mevalonate pathway, and the metabolic engineering strategies could also be applied to produce other valuable monoterpene compounds in yeast.

TAR Cloning: Perspectives for Functional Genomics, Biomedicine, and Biotechnology

Completion of the human genome sequence and recent advances in engineering technologies have enabled an unprecedented level of understanding of DNA variations and their contribution to human diseases and cellular functions. However, in some cases, long-read sequencing technologies do not allow determination of the genomic region carrying a specific mutation (e.g., a mutation located in large segmental duplications). Transformation-associated recombination (TAR) cloning allows selective, most accurate, efficient, and rapid isolation of a given genomic fragment or a full-length gene from simple and complex genomes. Moreover, this method is the only way to simultaneously isolate the same genomic region from multiple individuals. As such, TAR technology is currently in a leading position to create a library of the individual genes that comprise the human genome and physically characterize the sites of chromosomal alterations (copy number variations [CNVs], inversions, translocations) in the human population, associated with the predisposition to different diseases, including cancer. It is our belief that such a library and analysis of the human genome will be of great importance to the growing field of gene therapy, new drug design methods, and genomic research. In this review, we detail the motivation for TAR cloning for human genome studies, biotechnology, and biomedicine, discuss the recent progress of some TAR-based projects, and describe how TAR technology in combination with HAC (human artificial chromosome)-based and CRISPR-based technologies may contribute in the future.

Genetic platforms for heterologous expression of microbial natural products

Covering: 2005 up to 2019Natural products are of paramount importance in human medicine. Not only are most antibacterial and anticancer drugs derived directly from or inspired by natural products, many other branches of medicine, such as immunology, neurology, and cardiology, have similarly benefited from natural product-based drugs. Typically, the genetic material required to synthesize a microbial specialized product is arranged in a multigene biosynthetic gene cluster (BGC), which codes for proteins associated with molecule construction, regulation, and transport. The ability to connect natural product compounds to BGCs and vice versa, along with ever-increasing knowledge of biosynthetic machineries, has spawned the field of genomics-guided natural product genome mining for the rational discovery of new chemical entities. One significant challenge in the field of natural product genome mining is how to rapidly link orphan biosynthetic genes to their associated chemical products. This review highlights state-of-the-art genetic platforms to identify, interrogate, and engineer BGCs from diverse microbial sources, which can be broken into three stages: (1) cloning and isolation of genomic loci, (2) heterologous expression in a host organism, and (3) genetic manipulation of cloned pathways. In the future, we envision natural product genome mining will be rapidly accelerated by de novo DNA synthesis and refactoring of whole biosynthetic pathways in combination with systematic heterologous expression methodologies.

T5 exonuclease-dependent assembly offers a low-cost method for efficient cloning and site-directed mutagenesis

The assembly of DNA fragments with homologous arms is becoming popular in routine cloning. For an in vitro assembly reaction, a DNA polymerase is often used either alone for its 3'-5' exonuclease activity or together with a 5'-3' exonuclease for its DNA polymerase activity. Here, we present a 'T5 exonuclease DNA assembly' (TEDA) method that only uses a 5'-3' exonuclease. DNA fragments with short homologous ends were treated by T5 exonuclease and then transformed into Escherichia coli to produce clone colonies. The cloning efficiency was similar to that of the commercial In-Fusion method employing a proprietary DNA polymerase, but higher than that of the Gibson method utilizing T5 exonuclease, Phusion DNA polymerase, and DNA ligase. It also assembled multiple DNA fragments and did simultaneous site-directed mutagenesis at multiple sites. The reaction mixture was simple, and each reaction used 0.04 U of T5 exonuclease that cost 0.25 US cents. The simplicity, cost effectiveness, and cloning efficiency should promote its routine use, especially for labs with a budget constraint. TEDA may trigger further development of DNA assembly methods that employ single exonucleases.

Combined Assembly and Targeted Integration of Multigene for Nitrogenase Biosynthetic Pathway in Saccharomyces cerevisiae

Biological nitrogen fixation, a process unique to diazotrophic prokaryote, is catalyzed by the nitrogenase complex. There has been a long-standing interest in reconstituting a nitrogenase biosynthetic pathway in a eukaryotic host with the final aim of developing N₂-fixing cereal crops. In this study, we report that a nitrogenase biosynthetic pathway (∼38 kb containing 15 genes) was assembled in two individual one-step methods via in vivo assembly and integrated at δ and HO sites in Saccharomyces cerevisiae chromosome. Of the 15 genes, 11 genes (nifB, nifH, nifD, nifK, nifE, nifN, nifX, hesA, nifV, groES, groEL) were from Paenibacillus polymyxa WLY78 and 4 genes (nifS, nifU, nifF, nifJ) were from Klebsiella oxytoca. The 15-gene nitrogenase biosynthetic pathway was correctly assembled and transcribed in the recombinant S. cerevisiae. The NifDK tetramer with an identical molecular weight as that of P. polymyxa was formed in yeast and the expressed NifH exhibited the activity of Fe protein. This study demonstrates that it will be possible to produce active nitrogenase in eukaryotic hosts.

MetClo: methylase-assisted hierarchical DNA assembly using a single type IIS restriction enzyme

Efficient DNA assembly is of great value in biological research and biotechnology. Type IIS restriction enzyme-based assembly systems allow assembly of multiple DNA fragments in a one-pot reaction. However, large DNA fragments can only be assembled by alternating use of two or more type IIS restriction enzymes in a multi-step approach. Here, we present MetClo, a DNA assembly method that uses only a single type IIS restriction enzyme for hierarchical DNA assembly. The method is based on in vivo methylation-mediated on/off switching of type IIS restriction enzyme recognition sites that overlap with site-specific methylase recognition sequences. We have developed practical MetClo systems for the type IIS enzymes BsaI, BpiI and LguI, and demonstrated hierarchical assembly of large DNA fragments up to 218 kb. The MetClo approach substantially reduces the need to remove internal restriction sites from components to be assembled. The use of a single type IIS enzyme throughout the different stages of DNA assembly allows novel and powerful design schemes for rapid large-scale hierarchical DNA assembly. The BsaI-based MetClo system is backward-compatible with component libraries of most of the existing type IIS restriction enzyme-based assembly systems, and has potential to become a standard for modular DNA assembly.

Development of a CRISPR/Cas9 system for high efficiency multiplexed gene deletion in Rhodosporidium toruloides

The oleaginous yeast Rhodosporidium toruloides is considered a promising candidate for production of chemicals and biofuels thanks to its ability to grow on lignocellulosic biomass, and its high production of lipids and carotenoids. However, efforts to engineer this organism are hindered by a lack of suitable genetic tools. Here we report the development of a CRISPR/Cas9 system for genome editing in R. toruloides based on a fusion 5S rRNA-tRNA promoter for guide RNA (gRNA) expression, capable of greater than 95% gene knockout for various genetic targets. Additionally, multiplexed double-gene knockout mutants were obtained using this method with an efficiency of 78%. This tool can be used to accelerate future metabolic engineering work in this yeast.

Modular and Integrative Vectors for Synthetic Biology Applications in Streptomyces spp

With the development of synthetic biology in the field of (actinobacterial) specialized metabolism, new tools are needed for the design or refactoring of biosynthetic gene clusters. If libraries of synthetic parts (such as promoters or ribosome binding sites) and DNA cloning methods have been developed, to our knowledge, not many vectors designed for the flexible cloning of biosynthetic gene clusters have been constructed. We report here the construction of a set of 12 standardized and modular vectors designed to afford the construction or the refactoring of biosynthetic gene clusters in Streptomyces species, using a large panel of cloning methods. Three different resistance cassettes and four orthogonal integration systems are proposed. In addition, FLP recombination target sites were incorporated to allow the recycling of antibiotic markers and to limit the risks of unwanted homologous recombination in Streptomyces strains when several vectors are used. The functionality and proper integration of the vectors in three commonly used Streptomyces strains, as well as the functionality of the Flp-catalyzed excision, were all confirmed. To illustrate some possible uses of our vectors, we refactored the albonoursin gene cluster from Streptomyces noursei using the BioBrick assembly method. We also used the seamless ligase chain reaction cloning method to assemble a transcription unit in one of the vectors and genetically complement a mutant strain.IMPORTANCE One of the strategies employed today to obtain new bioactive molecules with potential applications for human health (for example, antimicrobial or anticancer agents) is synthetic biology. Synthetic biology is used to biosynthesize new unnatural specialized metabolites or to force the expression of otherwise silent natural biosynthetic gene clusters. To assist the development of synthetic biology in the field of specialized metabolism, we constructed and are offering to the community a set of vectors that were intended to facilitate DNA assembly and integration in actinobacterial chromosomes. These vectors are compatible with various DNA cloning and assembling methods. They are standardized and modular, allowing the easy exchange of a module by another one of the same nature. Although designed for the assembly or the refactoring of specialized metabolite gene clusters, they have a broader potential utility, for example, for protein production or genetic complementation.

A standard for near-scarless plasmid construction using reusable DNA parts

Here we report GT (Guanin/Thymine) standard (GTS) for plasmid construction under which DNA sequences are defined as two types of standard, reusable parts (fragment and barcode). We develop a technology that can efficiently add any two barcodes to two ends of any fragment without leaving scars in most cases. We can assemble up to seven such barcoded fragments into one plasmid by using one of the existing DNA assembly methods, including CLIVA, Gibson assembly, In-fusion cloning, and restriction enzyme-based methods. Plasmids constructed under GTS can be easily edited, and/or be further assembled into more complex plasmids by using standard DNA oligonucleotides (oligos). Based on 436 plasmids we constructed under GTS, the averaged accuracy of the workflow was 85.9%. GTS can also construct a library of plasmids from a set of fragments and barcodes combinatorically, which has been demonstrated to be useful for optimizing metabolic pathways.

Construction of plasmids from multiple fragments often uses customised parts and leaves scars where fragments are joined. Here the authors develop a method for barcoding fragments and constructing plasmids in a scarless manner from a collection of standard parts.

Development of a CRISPR/Cas9-Based Tool for Gene Deletion in Issatchenkia orientalis

The nonconventional yeast Issatchenkia orientalis has emerged as a potential platform microorganism for production of organic acids due to its ability to grow robustly under highly acidic conditions. However, lack of efficient genetic tools remains a major bottleneck in metabolic engineering of this organism. Here we report that the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) was functional for plasmid replication in I. orientalis, and the resulting episomal plasmid enabled efficient genome editing by the CRISPR/Cas9 system. The optimized CRISPR/Cas9-based system employed a fusion RPR1'-tRNA promoter for single guide RNA (sgRNA) expression and could attain greater than 97% gene disruption efficiency for various gene targets. Additionally, we demonstrated multiplexed gene deletion with disruption efficiencies of 90% and 47% for double gene and triple gene knockouts, respectively. This genome editing tool can be used for rapid strain development and metabolic engineering of this organism for production of biofuels and chemicals.IMPORTANCE Microbial production of fuels and chemicals from renewable and readily available biomass is a sustainable and economically attractive alternative to petroleum-based production. Because of its unusual tolerance to highly acidic conditions, I. orientalis is a promising potential candidate for the manufacture of valued organic acids. Nevertheless, reliable and efficient genetic engineering tools in I. orientalis are limited. The results outlined in this paper describe a stable episomal ARS-containing plasmid and the first CRISPR/Cas9-based system for gene disruptions in I. orientalis, paving the way for applying genome engineering and metabolic engineering strategies and tools in this microorganism for production of fuels and chemicals.

Modular design: Implementing proven engineering principles in biotechnology

Modular design is at the foundation of contemporary engineering, enabling rapid, efficient, and reproducible construction and maintenance of complex systems across applications. Remarkably, modularity has recently been discovered as a governing principle in natural biological systems from genes to proteins to complex networks within a cell and organism communities. The convergent knowledge of natural and engineered modular systems provides a key to drive modern biotechnology to address emergent challenges associated with health, food, energy, and the environment. Here, we first present the theory and application of modular design in traditional engineering fields. We then discuss the significance and impact of modular architectures on systems biology and biotechnology. Next, we focus on the very recent theoretical and experimental advances in modular cell engineering that seeks to enable rapid and systematic development of microbial catalysts capable of efficiently synthesizing a large space of useful chemicals. We conclude with an outlook towards theoretical and practical opportunities for a more systematic and effective application of modular cell engineering in biotechnology.