Converting trypsin to chymotrypsin: the role of surface loops

Structure and mechanism of a cysteine sulfinate desulfinase engineered on the aspartate aminotransferase scaffold

The joint substitution of three active-site residues in Escherichia coli (L)-aspartate aminotransferase increases the ratio of l-cysteine sulfinate desulfinase to transaminase activity 10(5)-fold. This change in reaction specificity results from combining a tyrosine-shift double mutation (Y214Q/R280Y) with a non-conservative substitution of a substrate-binding residue (I33Q). Tyr214 hydrogen bonds with O3 of the cofactor and is close to Arg374 which binds the α-carboxylate group of the substrate; Arg280 interacts with the distal carboxylate group of the substrate; and Ile33 is part of the hydrophobic patch near the entrance to the active site, presumably participating in the domain closure essential for the transamination reaction. In the triple-mutant enzyme, k(cat)' for desulfination of l-cysteine sulfinate increased to 0.5s(-1) (from 0.05s(-1) in wild-type enzyme), whereas k(cat)' for transamination of the same substrate was reduced from 510s(-1) to 0.05s(-1). Similarly, k(cat)' for β-decarboxylation of l-aspartate increased from<0.0001s(-1) to 0.07s(-1), whereas k(cat)' for transamination was reduced from 530s(-1) to 0.13s(-1). l-Aspartate aminotransferase had thus been converted into an l-cysteine sulfinate desulfinase that catalyzes transamination and l-aspartate β-decarboxylation as side reactions. The X-ray structures of the engineered l-cysteine sulfinate desulfinase in its pyridoxal-5'-phosphate and pyridoxamine-5'-phosphate form or liganded with a covalent coenzyme-substrate adduct identified the subtle structural changes that suffice for generating desulfinase activity and concomitantly abolishing transaminase activity toward dicarboxylic amino acids. Apparently, the triple mutation impairs the domain closure thus favoring reprotonation of alternative acceptor sites in coenzyme-substrate intermediates by bulk water.

Reengineering rate-limiting, millisecond enzyme motions by introduction of an unnatural amino acid

Rate-limiting millisecond motions in wild-type (WT) Ribonuclease A (RNase A) are modulated by histidine 48. Here, we incorporate an unnatural amino acid, thia-methylimidazole, at this site (H48C-4MI) to investigate the effects of a single residue on protein motions over multiple timescales and on enzyme catalytic turnover. Molecular dynamics simulations reveal that H48C-4MI retains some crucial WT-like hydrogen bonding interactions but the extent of protein-wide correlated motions in the nanosecond regime is decreased relative to WT. NMR Carr-Purcell-Meiboom-Gill relaxation dispersion experiments demonstrate that millisecond conformational motions in H48C-4MI are present over a similar pH range compared to WT. Furthermore, incorporation of this nonnatural amino acid allows retention of WT-like catalytic activity over the full pH range. These studies demonstrate that the complexity of the protein energy landscape during the catalytic cycle can be maintained using unnatural amino acids, which may prove useful in enzyme design efforts.

Structure-function analysis from the outside in: long-range tertiary contacts in RNA exhibit distinct catalytic roles

The conserved catalytic core of the Tetrahymena group I ribozyme is encircled by peripheral elements. We have conducted a detailed structure-function study of the five long-range tertiary contacts that fasten these distal elements together. Mutational ablation of each of the tertiary contacts destabilizes the folded ribozyme, indicating a role of the peripheral elements in overall stability. Once folded, three of the five tertiary contact mutants exhibit defects in overall catalysis that range from 20- to 100-fold. These and the subsequent results indicate that the structural ring of peripheral elements does not act as a unitary element; rather, individual connections have distinct roles as further revealed by kinetic and thermodynamic dissection of the individual reaction steps. Ablation of P14 or the metal ion core/metal ion core receptor (MC/MCR) destabilizes docking of the substrate-containing P1 helix into tertiary interactions with the ribozyme's conserved core. In contrast, ablation of the L9/P5 contact weakens binding of the guanosine nucleophile by slowing its association, without affecting P1 docking. The P13 and tetraloop/tetraloop receptor (TL/TLR) mutations had little functional effect and small, local structural changes, as revealed by hydroxyl radical footprinting, whereas the P14, MC/MCR, and L9/P5 mutants show structural changes distal from the mutation site. These changes extended into regions of the catalytic core involved in docking or guanosine binding. Thus, distinct allosteric pathways couple the long-range tertiary contacts to functional sites within the conserved core. This modular functional specialization may represent a fundamental strategy in RNA structure-function interrelationships.

Crystal structure of the passenger domain of the Escherichia coli autotransporter EspP

Autotransporters represent a large superfamily of known and putative virulence factors produced by Gram-negative bacteria. They consist of an N-terminal "passenger domain" responsible for the specific effector functions of the molecule and a C-terminal "β-domain" responsible for translocation of the passenger across the bacterial outer membrane. Here, we present the 2.5-Å crystal structure of the passenger domain of the extracellular serine protease EspP, produced by the pathogen Escherichia coli O157:H7 and a member of the serine protease autotransporters of Enterobacteriaceae (SPATEs). Like the previously structurally characterized SPATE passenger domains, the EspP passenger domain contains an extended right-handed parallel β-helix preceded by an N-terminal globular domain housing the catalytic function of the protease. Of note, however, is the absence of a second globular domain protruding from this β-helix. We describe the structure of the EspP passenger domain in the context of previous results and provide an alternative hypothesis for the function of the β-helix within SPATEs.

Deconstructing honeybee vitellogenin: novel 40 kDa fragment assigned to its N terminus

Vitellogenin, an egg-yolk protein precursor common to oviparous animals, is found abundantly in honeybee workers - a caste of helpers that do not usually lay eggs. Instead, honeybee vitellogenin (180 kDa) participates in processes other than reproduction: it influences hormone signaling, food-related behavior, immunity, stress resistance and longevity. The molecular basis of these functions is largely unknown. Here, we establish and compare the molecular properties of vitellogenin from honeybee hemolymph (blood) and abdominal fat body, two compartments that are linked to vitellogenin functions. Our results reveal a novel 40 kDa vitellogenin fragment in abdominal fat body tissue, the main site for vitellogenin synthesis and storage. Using MALDI-TOF combined with MS/MS mass-spectroscopy, we assign the 40 kDa fragment to the N terminus of vitellogenin, whereas a previously observed 150 kDa fragment corresponded to the remainder of the protein. We show that both protein units are N glycosylated and phosphorylated. Focusing on the novel 40 kDa fragment, we present a homology model based on the structure of lamprey lipovitellin that includes a conserved β-barrel-like shape, with a lipophilic cavity in the interior and two insect-specific loops that have not been described before. Our data indicate that the honeybee fat body vitellogenin experiences cleavage unlike hemolymph vitellogenin, a pattern that can suggest a tissue-specific role. Our experiments advance the molecular understanding of vitellogenin, of which the multiple physiological and behavioral effects in honeybees are well established.

Tightening of active site interactions en route to the transition state revealed by single-atom substitution in the guanosine-binding site of the Tetrahymena group I ribozyme

Protein enzymes establish intricate networks of interactions to bind and position substrates and catalytic groups within active sites, enabling stabilization of the chemical transition state. Crystal structures of several RNA enzymes also suggest extensive interaction networks, despite RNA's structural limitations, but there is little information on the functional and the energetic properties of these inferred networks. We used double mutant cycles and presteady-state kinetic analyses to probe the putative interaction between the exocyclic amino group of the guanosine nucleophile and the N7 atom of residue G264 of the Tetrahymena group I ribozyme. As expected, the results supported the presence of this interaction, but remarkably, the energetic penalty for introducing a CH group at the 7-position of residue G264 accumulates as the reaction proceeds toward the chemical transition state to a total of 6.2 kcal/mol. Functional tests of neighboring interactions revealed that the presence of the CH group compromises multiple contacts within the interaction network that encompass the reactive elements, apparently forcing the nucleophile to bind and attack from an altered, suboptimal orientation. The energetic consequences of this indirect disruption of neighboring interactions as the reaction proceeds demonstrate that linkage between binding interactions and catalysis hinges critically on the precise structural integrity of a network of interacting groups.

Redesigning allosteric activation in an enzyme

Enzyme activation by monovalent cations is widely documented in plants and the animal world. In type II enzymes, activation entails two steps: binding of the monovalent cation to its allosteric site and transduction of this event into enhanced catalytic activity. The effect has exquisite specificity for either Na(+) or K(+), the most abundant cations present in physiological environments. Enzymes requiring K(+) such as kinases and molecular chaperones are not activated as well or at all by the larger cation Cs(+) or the smaller cations Na(+) and Li(+). Enzymes requiring Na(+) such as β-galactosidase and clotting proteases are not activated as well by Li(+), or the larger cations K(+), Rb(+), and Cs(+). Efforts to switch specificity between Na(+) and K(+) in this large class of enzymes and completely redesign the mechanism of allosteric transduction leading to enhanced catalytic activity have so far been unsuccessful. Here we show how mutagenesis of two loops defining the Na(+) binding site of thrombin, a Na(+)-activated clotting protease, generates a construct that is most active in the presence of K(+) toward synthetic and physiological substrates. The effect is the result of a higher binding affinity and more efficient allosteric transduction of binding into enhanced catalytic activity for K(+) compared to Na(+), which represents a complete reversal of the properties of wild type. In addition, the construct features altered specificity toward physiological substrates resulting in a significant anticoagulant profile. The findings are relevant to all Na(+)-activated proteases involved in blood coagulation and the complement system.

α1-Antichymotrypsin inactivates staphylococcal cysteine protease in cross-class inhibition

Staphylococcal cysteine proteases are implicated as virulence factors in human and avian infections. Human strains of Staphylococcus aureus secrete two cysteine proteases (staphopains A and B), whereas avian strains express staphopain C (ScpA2), which is distinct from both human homologues. Here, we describe probable reasons why the horizontal transfer of a plasmid encoding staphopain C between avian and human strains has never been observed. The human plasma serine protease inhibitor α(1)-antichymotrypsin (ACHT) inhibits ScpA2. Together with the lack of ScpA2 inhibition by chicken plasma, these data may explain the exclusively avian occurrence of ScpA2. We also clarify the mechanistic details of this unusual cross-class inhibition. Analysis of mutated ACHT variants revealed that the cleavage of the Leu383-Ser384 peptide bond results in ScpA2 inhibition, whereas hydrolysis of the preceding peptide bond leads to ACHT inactivation. This evidence is consistent with the suicide-substrate-like mechanism of inhibition.

Conformational diversity and computational enzyme design

The application of computational protein design methods to the design of enzyme active sites offers potential routes to new catalysts and new reaction specificities. Computational design methods have typically treated the protein backbone as a rigid structure for the sake of computational tractability. However, this fixed-backbone approximation introduces its own special challenges for enzyme design and it contrasts with an emerging picture of natural enzymes as dynamic ensembles with multiple conformations and motions throughout a reaction cycle. This review considers the impact of conformational variation and dynamics on computational enzyme design and it highlights new approaches to addressing protein conformational diversity in enzyme design including recent advances in multi-state design, backbone flexibility, and computational library design.

How immune peptidases change specificity: cathepsin G gained tryptic function but lost efficiency during primate evolution

Cathepsin G is a major secreted serine peptidase of neutrophils and mast cells. Studies in Ctsg-null mice suggest that cathepsin G supports antimicrobial defenses but can injure host tissues. The human enzyme has an unusual "Janus-faced" ability to cleave peptides at basic (tryptic) as well as aromatic (chymotryptic) sites. Tryptic activity has been attributed to acidic Glu(226) in the primary specificity pocket and underlies proposed important functions, such as activation of prourokinase. However, most mammals, including mice, substitute Ala(226) for Glu(226), suggesting that human tryptic activity may be anomalous. To test this hypothesis, human cathepsin G was compared with mouse wild-type and humanized active site mutants, revealing that mouse primary specificity is markedly narrower than that of human cathepsin G, with much greater Tyr activity and selectivity and near absence of tryptic activity. It also differs from human in resisting tryptic peptidase inhibitors (e.g., aprotinin), while favoring angiotensin destruction at Tyr(4) over activation at Phe(8). Ala(226)Glu mutants of mouse cathepsin G acquire tryptic activity and human ability to activate prourokinase. Phylogenetic analysis reveals that the Ala(226)Glu missense mutation appearing in primates 31-43 million years ago represented an apparently unprecedented way to create tryptic activity in a serine peptidase. We propose that tryptic activity is not an attribute of ancestral mammalian cathepsin G, which was primarily chymotryptic, and that primate-selective broadening of specificity opposed the general trend of increased specialization by immune peptidases and allowed acquisition of new functions.

NMR and bioinformatics discovery of exosites that tune metalloelastase specificity for solubilized elastin and collagen triple helices

The catalytic domain of metalloelastase (matrix metalloproteinase-12 or MMP-12) is unique among MMPs in exerting high proteolytic activity upon fibrils that resist hydrolysis, especially elastin from lungs afflicted with chronic obstructive pulmonary disease or arteries with aneurysms. How does the MMP-12 catalytic domain achieve this specificity? NMR interface mapping suggests that α-elastin species cover the primed subsites, a strip across the β-sheet from β-strand IV to the II-III loop, and a broad bowl from helix A to helix C. The many contacts may account for the comparatively high affinity, as well as embedding of MMP-12 in damaged elastin fibrils in vivo. We developed a strategy called BINDSIght, for bioinformatics and NMR discovery of specificity of interactions, to evaluate MMP-12 specificity without a structure of a complex. BINDSIght integration of the interface mapping with other ambiguous information from sequences guided choice mutations in binding regions nearer the active site. Single substitutions at each of ten locations impair specific activity toward solubilized elastin. Five of them impair release of peptides from intact elastin fibrils. Eight lesions also impair specific activity toward triple helices from collagen IV or V. Eight sites map to the "primed" side in the III-IV, V-B, and S1' specificity loops. Two map to the "unprimed" side in the IV-V and B-C loops. The ten key residues circumscribe the catalytic cleft, form an exosite, and are distinctive features available for targeting by new diagnostics or therapeutics.

Increasing the conformational entropy of the Omega-loop lid domain in phosphoenolpyruvate carboxykinase impairs catalysis and decreases catalytic fidelity

Many studies have shown that the dynamic motions of individual protein segments can play an important role in enzyme function. Recent structural studies of the gluconeogenic enzyme phosphoenolpyruvate carboxykinase (PEPCK) demonstrate that PEPCK contains a 10-residue Omega-loop domain that acts as an active site lid. On the basis of these structural studies, we have previously proposed a model for the mechanism of PEPCK catalysis in which the conformation of this mobile lid domain is energetically coupled to ligand binding, resulting in the closed conformation of the lid, necessary for correct substrate positioning, becoming more energetically favorable as ligands associate with the enzyme. Here we test this model by introducing a point mutation (A467G) into the center of the Omega-loop lid that is designed to increase the entropic penalty for lid closure. Structural and kinetic characterization of this mutant enzyme demonstrates that the mutation has decreased the favorability of the enzyme adapting the closed lid conformation. As a consequence of this shift in the equilibrium defining the conformation of the active site lid, the enzyme's ability to stabilize the reaction intermediate is weakened, resulting in catalytic defect. This stabilization is initially surprising, as the lid domain makes no direct contacts with the enolate intermediate formed during the reaction. Furthermore, during the conversion of OAA to PEP, the destabilization of the lid-closed conformation results in the reaction becoming decoupled as the enolate intermediate is protonated rather than phosphorylated, resulting in the formation of pyruvate. Taken together, the structural and kinetic characterization of A467G-PEPCK supports our model of the role of the active site lid in catalytic function and demonstrates that the shift in the lowest-energy conformation between open and closed lid states is a function of the free energy available to the enzyme through ligand binding and the entropic penalty for ordering of the 10-residue Omega-loop lid domain.

Combinatorial enzyme design probes allostery and cooperativity in the trypsin fold

Converting one enzyme into another is challenging due to the uneven distribution of important amino acids for function in both protein sequence and structure. We report a strategy for protein engineering allowing an organized mixing and matching of genetic material that leverages lower throughput with increased quality of screens. Our approach successfully tested the contribution of each surface-exposed loop in the trypsin fold alone and the cooperativity of their combinations towards building the substrate selectivity and Na(+)-dependent allosteric activation of the protease domain of human coagulation factor Xa into a bacterial trypsin. As the created proteases lack additional protein domains and protein co-factor activation mechanism requisite for the complexity of blood coagulation, they are stepping-stones towards further understanding and engineering of artificial clotting factors.

Inhibitory properties of the P1 Tyr variant of antithrombin

Antithrombin (AT) and protein Z-dependent protease inhibitor (ZPI) are among two physiological serpin inhibitors in plasma that are involved in the regulation of the clotting cascade. Unlike AT, which can inhibit the proteolytic activity of all coagulation proteases, ZPI has narrower protease specificity, inhibiting only factors Xa (fXa) and XIa. Unlike an Arg at the P1 site of the AT reactive center loop (RCL), this residue is a Tyr in ZPI. To investigate the contribution of P1 Tyr in restricting the specificity of ZPI, we engineered an AT mutant in which the P1 Arg of the RCL was replaced with the P1 Tyr of ZPI (AT-R393Y). The reactivity of AT-R393Y with fXa and thrombin was decreased 155- and 970-fold, respectively. However, the serpin mutant inhibited chymotrypsin with an efficiency higher by >4 orders of magnitude. By contrast, chymotrypsin did not exhibit any reactivity with ZPI. The substitution of Asp-189 of fXa with the corresponding residue of chymotrypsin (Ser) did not improve the reactivity of the protease mutant with AT-R393Y; however, the fXa mutant reacted normally with ZPI. These results suggest that the contribution of P1 Tyr to restricting the protease specificity of ZPI is RCL context-dependent and that in addition to P1 Tyr, other structural features within and/or outside the ZPI RCL are involved in determining the protease specificity of the serpin. The results further suggest that thrombin is less tolerant than fXa in accommodating the nonoptimal P1 Tyr of the AT mutant in its active-site pocket.

Characterization of cold-adapted Atlantic cod (Gadus morhua) trypsin I--kinetic parameters, autolysis and thermal stability

Atlantic cod trypsin I is a highly active cold-adapted protease. This study aimed at further characterization of this enzyme with respect to kinetic parameters, sites of autolysis and stability. For that purpose, trypsin I was purified by anion exchange chromatography. Its purity and identity was verified by SDS-PAGE analysis and mass spectrometry. Concomitantly, another cod trypsin isozyme, trypsin X, previously only described from its cDNA sequence was detected in a separate peak from the ion exchange chromatogram. There was a stepwise increase in the catalytic efficiency (k(cat)/K(m)) of cod trypsin I obtained with substrates containing one to three amino acid residues. As expected, the activity of trypsin I was maintained for longer periods of time at 15 degrees C than at higher temperatures. The residues of the trypsin I molecule most sensitive to autolysis were identified using Edman degradation. Eleven autolytic cleavage sites were detected within the trypsin I molecule. Unfolding experiments demonstrated that autolysis is a contributing factor in the stability of trypsin I. In addition, the data shows that cod trypsin I is less stable towards thermal unfolding than its mesophilic bovine analogue.

Active site prediction using evolutionary and structural information

Motivation: The identification of catalytic residues is a key step in understanding the function of enzymes. While a variety of computational methods have been developed for this task, accuracies have remained fairly low. The best existing method exploits information from sequence and structure to achieve a precision (the fraction of predicted catalytic residues that are catalytic) of 18.5% at a corresponding recall (the fraction of catalytic residues identified) of 57% on a standard benchmark. Here we present a new method, Discern, which provides a significant improvement over the state-of-the-art through the use of statistical techniques to derive a model with a small set of features that are jointly predictive of enzyme active sites.

Results: In cross-validation experiments on two benchmark datasets from the Catalytic Site Atlas and CATRES resources containing a total of 437 manually curated enzymes spanning 487 SCOP families, Discern increases catalytic site recall between 12% and 20% over methods that combine information from both sequence and structure, and by ≥50% over methods that make use of sequence conservation signal only. Controlled experiments show that Discern's improvement in catalytic residue prediction is derived from the combination of three ingredients: the use of the INTREPID phylogenomic method to extract conservation information; the use of 3D structure data, including features computed for residues that are proximal in the structure; and a statistical regularization procedure to prevent overfitting.

Contact:kimmen@berkeley.edu

Supplementary information:Supplementary data are available at Bioinformatics online.

The flexibility of a distant loop modulates active site motion and product release in ribonuclease A

The role of the flexible loop 1 in protein conformational motion and in the dissociation of enzymatic product from ribonuclease A (RNase A) was investigated by creation of a chimeric enzyme in which a 6-residue loop 1 from the RNase A homologue, eosinophil cationic protein (ECP), replaced the 12-residue loop 1 in RNase A. The chimera (RNase A(ECP)) experiences only local perturbations in NMR backbone chemical shifts compared to WT RNase A. Many of the flexible residues that were previously identified in WT as involved in an important conformational change now experience no NMR-detected millisecond motions in the chimera. Likewise, binding of the product analogue, 3'-CMP, to RNase A(ECP) results in only minor chemical shift changes in the enzyme similar to what is observed for the H48A mutant of RNase A and in contrast to WT enzyme. For both RNase A(ECP) and H48A there is a 10-fold decrease in the product release rate constant, k(off), compared to WT, in agreement with previous studies indicating the importance of flexibility in RNase A in the overall rate-limiting product release step. Together, these NMR and biochemical experiments provide additional insight into the mechanism of millisecond motions in the RNase A catalytic cycle.

Factor IX mutants with enhanced catalytic activity

BACKGROUND

Activated coagulation factor IX (FIXa) has low catalytic activity towards its physiologic substrate FX when activated FVIII (FVIIIa) is absent. One reason for this is that the FIX surface loop 99 stabilizes FIXa in a conformation that limits access of FX to the active site.

OBJECTIVES

To investigate the effect of mutations in loop 99 and in the active site on FIXa activity with and without FVIIIa.

METHODS

Five full-length FIX mutants with amino acid exchanges in the catalytic domain of FIX were constructed and characterized by measuring their activity in FX activation in model systems and in plasma.

RESULTS AND CONCLUSIONS

The mutants showed no or marginally improved catalytic properties in FX activation by the intrinsic tenase complex (FIXa-FVIIIa-Ca(2+)-phospholipid). The combination of mutations Y94F and K98T hardly affected FX activation in the presence of FVIIIa, but yielded a FIX molecule that, in FIX-depleted plasma, had approximately 2.5-fold higher clotting activity and approximately 3.5-fold higher activity in a thrombin generation assay than plasma-derived FIX (pdFIX). Two FIXa mutants had considerably increased activities towards FX in the absence of FVIIIa. FIXa-Y94F/K98T/Y177F/I213V/E219G (FIXa-L) and FIXa-Y94F/A95aK/K98T/Y177F/I213V/E219G (FIXa-M) activated FX with catalytic efficiencies (k(cat)/K(m)) that, as compared with activated pdFIX, were increased 17-fold and six-fold, respectively. However, in plasma, their zymogen forms performed similarly to pdFIX. This indicates that the introduced mutations not only affected the activity of FIXa but may have also influenced the lifetime of the activated mutant molecules in plasma by modifying their activation and/or inhibition rates.

A combinatorial approach to detect coevolved amino acid networks in protein families of variable divergence

Communication between distant sites often defines the biological role of a protein: amino acid long-range interactions are as important in binding specificity, allosteric regulation and conformational change as residues directly contacting the substrate. The maintaining of functional and structural coupling of long-range interacting residues requires coevolution of these residues. Networks of interaction between coevolved residues can be reconstructed, and from the networks, one can possibly derive insights into functional mechanisms for the protein family. We propose a combinatorial method for mapping conserved networks of amino acid interactions in a protein which is based on the analysis of a set of aligned sequences, the associated distance tree and the combinatorics of its subtrees. The degree of coevolution of all pairs of coevolved residues is identified numerically, and networks are reconstructed with a dedicated clustering algorithm. The method drops the constraints on high sequence divergence limiting the range of applicability of the statistical approaches previously proposed. We apply the method to four protein families where we show an accurate detection of functional networks and the possibility to treat sets of protein sequences of variable divergence.

Cloning and molecular characterization of two complement Bf/C2 genes in large yellow croaker (Pseudosciaena crocea)

Complement components factor B and C2 are two crucial proteases in the alternative pathway (AP) and classical pathway (CP). Two Bf/C2 cDNAs, LycBf/C2A and LycBf/C2B were isolated from the large yellow croaker (Pseudosciaena crocea) by suppression subtractive hybridization (SSH) and rapid amplification of cDNA ends (RACE). Through sequence alignment and computer 3D modeling analysis, we found that both of the deduced proteins contain three complement control protein (CCP) modules, a von Willebrand factor A (vWFA) domain, and one serine protease (SP) domain. Both structural analysis and phylogenetic analyses suggested that LycBf/C2A is more like human factor B than human C2 while LycBf/C2B is more human C2-like. After that, RT-PCR assay showed that LycBf/C2A and LycBf/C2B were mostly expressed in liver, albeit detectable in other tissues. Finally, after being infected with attenuated live Vibrio anguillarum strain, the expression level of LycBf/C2A and LycBf/C2B were found remarkably up-regulated in liver, spleen and kidney, indicating that the two complement factors play a pivotal role in the immune response to bacterial challenge in large yellow croaker.

Engineering next generation proteases

The engineering of novel and precise sequence specificity into proteases will provide an important route to the development of exciting new tools for analytical, biotechnological, and therapeutic applications. Significant progress has been made in reprogramming protease specificity, largely because of the development of high-throughput assay technologies allowing the isolation of protease variants from large libraries. For example, using directed evolution as well as other approaches, proteases have been reprogrammed to cleave substrates containing a variety of amino acids in the P1 and P1' positions including a post-translationally modified tyrosine, a specificity not yet identified in any naturally occurring protease. Together, these recent advances represent substantial progress that could soon enable the widespread application of engineered proteases.

Serine proteases

Over one third of all known proteolytic enzymes are serine proteases. Among these, the trypsins underwent the most predominant genetic expansion yielding the enzymes responsible for digestion, blood coagulation, fibrinolysis, development, fertilization, apoptosis, and immunity. The success of this expansion resides in a highly efficient fold that couples catalysis and regulatory interactions. Added complexity comes from the recent observation of a significant conformational plasticity of the trypsin fold. A new paradigm emerges where two forms of the protease, E* and E, are in allosteric equilibrium and determine biological activity and specificity.

Structure of a serine protease poised to resynthesize a peptide bond

The serine proteases are among the most thoroughly studied enzymes, and numerous crystal structures representing the enzyme-substrate complex and intermediates in the hydrolysis reactions have been reported. Some aspects of the catalytic mechanism remain controversial, however, especially the role of conformational changes in the reaction. We describe here a high-resolution (1.46 A) crystal structure of a complex formed between a cleaved form of bovine pancreatic trypsin inhibitor (BPTI) and a catalytically inactive trypsin variant with the BPTI cleavage site ideally positioned in the active site for resynthesis of the peptide bond. This structure defines the positions of the newly generated amino and carboxyl groups following the 2 steps in the hydrolytic reaction. Comparison of this structure with those representing other intermediates in the reaction demonstrates that the residues of the catalytic triad are positioned to promote each step of both the forward and reverse reaction with remarkably little motion and with conservation of hydrogen-bonding interactions. The results also provide insights into the mechanism by which inhibitors like BPTI normally resist hydrolysis when bound to their target proteases.

Alteration of enzyme specificity by computational loop remodeling and design

Altering the specificity of an enzyme requires precise positioning of side-chain functional groups that interact with the modified groups of the new substrate. This requires not only sequence changes that introduce the new functional groups but also sequence changes that remodel the structure of the protein backbone so that the functional groups are properly positioned. We describe a computational design method for introducing specific enzyme-substrate interactions by directed remodeling of loops near the active site. Benchmark tests on 8 native protein-ligand complexes show that the method can recover native loop lengths and, often, native loop conformations. We then use the method to redesign a critical loop in human guanine deaminase such that a key side-chain interaction is made with the substrate ammelide. The redesigned enzyme is 100-fold more active on ammelide and 2.5e4-fold less active on guanine than wild-type enzyme: The net change in specificity is 2.5e6-fold. The structure of the designed protein was confirmed by X-ray crystallographic analysis: The remodeled loop adopts a conformation that is within 1-A Calpha RMSD of the computational model.

Role of loop-loop interactions in coordinating motions and enzymatic function in triosephosphate isomerase

The enzyme triosephosphate isomerase (TIM) has been used as a model system for understanding the relationship between protein sequence, structure, and biological function. The sequence of the active site loop (loop 6) in TIM is directly correlated with a conserved motif in loop 7. Replacement of loop 7 of chicken TIM with the corresponding loop 7 sequence from an archaeal homologue caused a 10(2)-fold loss in enzymatic activity, a decrease in substrate binding affinity, and a decrease in thermal stability. Isotope exchange studies performed by one-dimensional (1)H NMR showed that the substrate-derived proton in the enzyme is more susceptible to solvent exchange for DHAP formation in the loop 7 mutant than for WT TIM. TROSY-Hahn Echo and TROSY-selected R(1rho) experiments indicate that upon mutation of loop 7, the chemical exchange rate for active site loop motion is nearly doubled and that the coordinated motion of loop 6 is reduced relative to that of the WT. Temperature dependent NMR experiments show differing activation energies for the N- and C-terminal hinges in this mutant enzyme. Together, these data suggest that interactions between loop 6 and loop 7 are necessary to provide the proper chemical context for the enzymatic reaction to occur and that the interactions play a significant role in modulating the chemical dynamics near the active site.

Highly active and selective endopeptidases with programmed substrate specificities

A family of engineered endopeptidases has been created that is capable of cleaving a diverse array of peptide sequences with high selectivity and catalytic efficiency (kcat/KM > 10(40 M(- 1) s(- 1)). By screening libraries with a selection-counterselection substrate method, protease variants were programmed to recognize amino acids having altered charge, size and hydrophobicity properties adjacent to the scissile bond of the substrate, including GluArg, a specificity that to our knowledge has not been observed among natural proteases. Members of this artificial protease family resulted from a relatively small number of amino acid substitutions that (at least in one case) proved to be epistatic.

The crystal structure of a trypsin-like mutant chymotrypsin: the role of position 226 in the activity and specificity of S189D chymotrypsin

The crystal structure of the S189D+A226G rat chymotrypsin-B mutant has been determined at 2.2 angstroms resolution. This mutant is the most trypsin-like mutant so far in the line of chymotrypsin-to-trypsin conversions, aiming for a more complete understanding of the structural basis of substrate specificity in pancreatic serine proteases. A226G caused significant rearrangements relative to S189D chymotrypsin, allowing an internal conformation of Asp189 which is close to that in trypsin. Serious distortions remain, however, in the activation domain, including zymogen-like features. The pH-profile of activity suggests that the conformation of the S1-site of the mutant is influenced also by the P1 residue of the substrate.

An overview of serine proteases

This unit summarizes the families of serine proteases and their mechanism of catalysis. Methods for assays and determining substrate specificity are briefly described. The mode of action of commonly available inhibitors is also included.

Computational study of the putative active form of protein Z (PZa): sequence design and structural modeling

Although protein Z (PZ) has a domain arrangement similar to the essential coagulation proteins FVII, FIX, FX, and protein C, its serine protease (SP)-like domain is incomplete and does not exhibit proteolytic activity. We have generated a trial sequence of putative activated protein Z (PZa) by identifying amino acid mutations in the SP-like domain that might reasonably resurrect the serine protease catalytic activity of PZ. The structure of the activated form was then modeled based on the proposed sequence using homology modeling and solvent-equilibrated molecular dynamics simulations. In silico docking of inhibitors of FVIIa and FXa to the putative active site of equilibrated PZa, along with structural comparison with its homologous proteins, suggest that the designed PZa can possibly act as a serine protease.

A rationally engineered misacylating aminoacyl-tRNA synthetase

Information transfer from nucleic acid to protein is mediated by aminoacyl-tRNA synthetases, which catalyze the specific pairings of amino acids with transfer RNAs. Despite copious sequence and structural information on the 22 tRNA synthetase families, little is known of the enzyme signatures that specify amino acid selectivities. Here, we show that transplanting a conserved arginine residue from glutamyl-tRNA synthetase (GluRS) to glutaminyl-tRNA synthetase (GlnRS) improves the K(M) of GlnRS for noncognate glutamate. Two crystal structures of this C229R GlnRS mutant reveal that a conserved twin-arginine GluRS amino acid identity signature cannot be incorporated into GlnRS without disrupting surrounding protein structural elements that interact with the tRNA. Consistent with these findings, we show that cumulative replacement of other primary binding site residues in GlnRS, with those of GluRS, only slightly improves the ability of the GlnRS active site to accommodate glutamate. However, introduction of 22 amino acid replacements and one deletion, including substitution of the entire primary binding site and two surface loops adjacent to the region disrupted in C229R, improves the capacity of Escherichia coli GlnRS to synthesize misacylated Glu-tRNA(Gln) by 16,000-fold. This hybrid enzyme recapitulates the function of misacylating GluRS enzymes found in organisms that synthesize Gln-tRNA(Gln) by an alternative pathway. These findings implicate the RNA component of the contemporary GlnRS-tRNA(Gln) complex in mediating amino acid specificity. This role for tRNA may persist as a relic of primordial cells in which the evolution of the genetic code was driven by RNA-catalyzed amino acid-RNA pairing.

Over-expression and purification of active serine proteases and their variants from Escherichia coli inclusion bodies

This unit describes the over-expression and purification of active serine proteases and their variants from E. coli inclusion bodies. The strategy includes the folding and purification of a stable zymogen precursor protein, and its later activation with the appropriate convertase to the less stable but active protease. A test to follow the presence of activity in the samples, together with an active-site titration protocol to determine the number of active sites per mole of total protein are provided. It should be emphasized that although most of the protocols described are applied to a specific example, they are fairly representative of the methods and approaches generally used for laboratory-scale preparation of other recombinant serine proteases. The critical steps and how this template protocol can be adapted for the purification of other serine proteases are described.

Engineering protein allostery: 1.05 A resolution structure and enzymatic properties of a Na+-activated trypsin

Some trypsin-like proteases are endowed with Na(+)-dependent allosteric enhancement of catalytic activity, but this important mechanism has been difficult to engineer in other members of the family. Replacement of 19 amino acids in Streptomyces griseus trypsin targeting the active site and the Na(+)-binding site were found necessary to generate efficient Na(+) activation. Remarkably, this property was linked to the acquisition of a new substrate selectivity profile similar to that of factor Xa, a Na(+)-activated protease involved in blood coagulation. The X-ray crystal structure of the mutant trypsin solved to 1.05 A resolution defines the engineered Na(+) site and active site loops in unprecedented detail. The results demonstrate that trypsin can be engineered into an efficient allosteric protease, and that Na(+) activation is interwoven with substrate selectivity in the trypsin scaffold.

Antimicrobial peptides with stability toward tryptic degradation

The inherent instability of peptides toward metabolic degradation is an obstacle on the way toward bringing potential peptide drugs onto the market. Truncation can be one way to increase the proteolytic stability of peptides, and in the present study the susceptibility against trypsin, which is one of the major proteolytic enzymes in the gastrointestinal tract, was investigated for several short and diverse libraries of promising cationic antimicrobial tripeptides. Quite surprisingly, trypsin was able to cleave very small cationic antimicrobial peptides at a substantial rate. Isothermal titration calorimetry studies revealed stoichiometric interactions between selected peptides and trypsin, with dissociation constants ranging from 1 to 20 microM. Introduction of hydrophobic C-terminal amide modifications and likewise bulky synthetic side chains on the central amino acid offered an effective way to increased half-life in our assays. Analysis of the degradation products revealed that the location of cleavage changed when different end-capping strategies were employed to increase the stability and the antimicrobial potency. This suggests that trypsin prefers a bulky hydrophobic element in S1' in addition to a positively charged side chain in S1 and that this binding dictates the mode of cleavage for these substrates. Molecular modeling studies supported this hypothesis, and it is shown that small alterations of the tripeptide result in two very different modes of trypsin binding and degradation. The data presented allows for the design of stable cationic antibacterial peptides and/or peptidomimetics based on several novel design principles.