Asymmetric controlled bidirectional remote preparation of two- and three-qubit equatorial state

In this paper, a novel asymmetric controlled bidirectional remote preparation scheme is proposed. In our scheme, Alice and Bob are not only the senders but also the receivers with the control of Charlie. By using the eleven-qubit entangled state as the quantum channel, Alice prepares an arbitrary two-qubit equatorial state for Bob and Bob prepares an arbitrary three-qubit equatorial state for Alice simultaneously. Firstly, we give the construction process of the quantum channel. Secondly, the whole recovery operations are given. Alice and Bob can recover the prepared state determinately. Thirdly, we consider the effect of the noisy environment (amplitude-damping and phase-damping) in our scheme and calculate the fidelities of the output states. Finally, since our scheme does not need additional operations and auxiliary qubits, the efficiency of our scheme is higher than that of the previous schemes.

High-temperature operation of a silicon qubit

This study alleviates the low operating temperature constraint of Si qubits. A qubit is a key element for quantum sensors, memories, and computers. Electron spin in Si is a promising qubit, as it allows both long coherence times and potential compatibility with current silicon technology. Si qubits have been implemented using gate-defined quantum dots or shallow impurities. However, operation of Si qubits has been restricted to milli-Kelvin temperatures, thus limiting the application of the quantum technology. In this study, we addressed a single deep impurity, having strong electron confinement of up to 0.3 eV, using single-electron tunnelling transport. We also achieved qubit operation at 5–10 K through a spin-blockade effect based on the tunnelling transport via two impurities. The deep impurity was implemented by tunnel field-effect transistors (TFETs) instead of conventional FETs. With further improvement in fabrication and controllability, this work presents the possibility of operating silicon spin qubits at elevated temperatures.

Semiconductor quantum computation

Semiconductors, a significant type of material in the information era, are becoming more and more powerful in the field of quantum information. In recent decades, semiconductor quantum computation was investigated thoroughly across the world and developed with a dramatically fast speed. The research varied from initialization, control and readout of qubits, to the architecture of fault-tolerant quantum computing. Here, we first introduce the basic ideas for quantum computing, and then discuss the developments of single- and two-qubit gate control in semiconductors. Up to now, the qubit initialization, control and readout can be realized with relatively high fidelity and a programmable two-qubit quantum processor has even been demonstrated. However, to further improve the qubit quality and scale it up, there are still some challenges to resolve such as the improvement of the readout method, material development and scalable designs. We discuss these issues and introduce the forefronts of progress. Finally, considering the positive trend of the research on semiconductor quantum devices and recent theoretical work on the applications of quantum computation, we anticipate that semiconductor quantum computation may develop fast and will have a huge impact on our lives in the near future.

Use of quantum effects as potential qualifying metrics for "quantum grade silicon"

Across solid state quantum information, materials deficiencies limit performance through enhanced relaxation, charge defect motion or isotopic spin noise. While classical measurements of device performance provide cursory guidance, specific qualifying metrics and measurements applicable to quantum devices are needed. For quantum applications, new materials metrics, e.g., enrichment, are needed, while existing, classical metrics like mobility might be relaxed compared to conventional electronics. In this work, we examine locally grown silicon superior in enrichment, but inferior in chemical purity compared to commercial-silicon, as part of an effort to underpin the materials standards needed for quantum grade silicon and establish a standard approach for intercomparison of these materials. We use a custom, mass-selected ion beam deposition technique, which has produced isotopic enrichment levels up to 99.99998 % 28Si, to isotopically enrich 28Si, but with chemical purity > 99.97% due the MBE techniques used. From this epitaxial silicon, we fabricate top-gated Hall bar devices simultaneously on the 28Si and on the adjacent natural abundance Si substrate for intercomparison. Using standard-methods, we measure maximum mobilities of ≈ ( 1740 ± 2 ) cm 2 / ( V ⋅ s ) at an electron density of ( 2.7 × 10 12 ± 3 × 10 8 ) cm-2 and ≈ ( 6040 ± 3 ) cm 2 / ( V ⋅ s ) at an electron density of ( 1.2 × 10 12 ± 5 × 10 8 ) cm-2 at T = 1.9 K for devices fabricated on 28Si and natSi, respectively. For magnetic fields B > 2 T, both devices demonstrate well developed Shubnikov-de Haas (SdH) oscillations in the longitudinal magnetoresistance. This provides transport characteristics of isotopically enriched 28Si, and will serve as a benchmark for classical transport of 28Si at its current state, and low temperature, epitaxially grown Si for quantum devices more generally.

A fast quantum interface between different spin qubit encodings

Single-spin qubits in semiconductor quantum dots hold promise for universal quantum computation with demonstrations of a high single-qubit gate fidelity above 99.9% and two-qubit gates in conjunction with a long coherence time. However, initialization and readout of a qubit is orders of magnitude slower than control, which is detrimental for implementing measurement-based protocols such as error-correcting codes. In contrast, a singlet-triplet qubit, encoded in a two-spin subspace, has the virtue of fast readout with high fidelity. Here, we present a hybrid system which benefits from the different advantages of these two distinct spin-qubit implementations. A quantum interface between the two codes is realized by electrically tunable inter-qubit exchange coupling. We demonstrate a controlled-phase gate that acts within 5.5 ns, much faster than the measured dephasing time of 211 ns. The presented hybrid architecture will be useful to settle remaining key problems with building scalable spin-based quantum computers.

The race to produce a quantum computer has driven the development of many different qubit designs with different benefits and drawbacks. Noiri et al. demonstrate a hybrid device with two coupled semiconductor spin qubits of different designs, which should allow each qubit’s advantages to be exploited.

Single-Shot Readout of Hole Spins in Ge

The strong atomistic spin-orbit coupling of holes makes single-shot spin readout measurements difficult because it reduces the spin lifetimes. By integrating the charge sensor into a high bandwidth radio frequency reflectometry setup, we were able to demonstrate single-shot readout of a germanium quantum dot hole spin and measure the spin lifetime. Hole spin relaxation times of about 90 μs at 500 mT are reported, with a total readout visibility of about 70%. By analyzing separately the spin-to-charge conversion and charge readout fidelities, we have obtained insight into the processes limiting the visibilities of hole spins. The analyses suggest that high hole visibilities are feasible at realistic experimental conditions, underlying the potential of hole spins for the realization of viable qubit devices.

30 GHz-voltage controlled oscillator operating at 4 K

Solid-state qubit manipulation and read-out fidelities are reaching fault-tolerance, but quantum error correction requires millions of physical qubits and therefore a scalable quantum computer architecture. To solve signal-line bandwidth and fan-out problems, microwave sources required for qubit manipulation might be embedded close to the qubit chip, typically operating at temperatures below 4 K. Here, we perform the first low temperature measurements of a 130 nm BiCMOS based SiGe voltage controlled oscillator at cryogenic temperature. We determined the frequency and output power dependence on temperature and magnetic field up to 5 T and measured the temperature influence on its noise performance. The device maintains its full functionality from 300 K to 4 K. The carrier frequency at 4 K increases by 3% with respect to the carrier frequency at 300 K, and the output power at 4 K increases by 10 dB relative to the output power at 300 K. The frequency tuning range of approximately 20% remains unchanged between 300 K and 4 K. In an in-plane magnetic field of 5 T, the carrier frequency shifts by only 0.02% compared to the frequency at zero magnetic field.

Integrated silicon qubit platform with single-spin addressability, exchange control and single-shot singlet-triplet readout

Silicon quantum dot spin qubits provide a promising platform for large-scale quantum computation because of their compatibility with conventional CMOS manufacturing and the long coherence times accessible using ²⁸Si enriched material. A scalable error-corrected quantum processor, however, will require control of many qubits in parallel, while performing error detection across the constituent qubits. Spin resonance techniques are a convenient path to parallel two-axis control, while Pauli spin blockade can be used to realize local parity measurements for error detection. Despite this, silicon qubit implementations have so far focused on either single-spin resonance control, or control and measurement via voltage-pulse detuning in the two-spin singlet–triplet basis, but not both simultaneously. Here, we demonstrate an integrated device platform incorporating a silicon metal-oxide-semiconductor double quantum dot that is capable of single-spin addressing and control via electron spin resonance, combined with high-fidelity spin readout in the singlet-triplet basis.

Significant progress has been made developing the different methods needed for a spin-based quantum computer but the challenge of integrating them remains. Fogarty et al. present a system with single-spin addressability, spin-spin interactions and high-fidelity readout that provides a scalable foundation for error-corrected devices.

Quadrupolar Exchange-Only Spin Qubit

We propose a quadrupolar exchange-only spin qubit that is highly robust against charge noise and nuclear spin dephasing, the dominant decoherence mechanisms in quantum dots. The qubit consists of four electrons trapped in three quantum dots, and operates in a decoherence-free subspace to mitigate dephasing due to nuclear spins. To reduce sensitivity to charge noise, the qubit can be completely operated at an extended charge noise sweet spot that is first-order insensitive to electrical fluctuations. Because of on-site exchange mediated by the Coulomb interaction, the qubit energy splitting is electrically controllable and can amount to several GHz even in the "off" configuration, making it compatible with conventional microwave cavities.

Dynamics of probing a quantum-dot spin qubit with superconducting resonator photons

The hybrid system of electron spins and resonator photons is an attractive architecture for quantum computing owing to the long coherence times of spins and the promise of long-distance coupling between arbitrary pairs of qubits via photons. For the device to serve as a building block for a quantum processer, it is also necessary to readout the spin qubit state. Here we analyze in detail the measurement process of an electron spin singlet-triplet qubit in quantum dots using a coupled superconducting resonator. We show that the states of the spin singlet-triplet qubit lead to readily observable features in the spectrum of a microwave field through the resonator. These features provide useful information on the hybrid system. Moreover, we discuss the working points which can be implemented with high performance in the current state-of-the-art devices. These results can be used to construct the high fidelity measurement toolbox in the spin-circuit QED system.

Spin Lifetime and Charge Noise in Hot Silicon Quantum Dot Qubits

We investigate the magnetic field and temperature dependence of the single-electron spin lifetime in silicon quantum dots and find a lifetime of 2.8 ms at a temperature of 1.1 K. We develop a model based on spin-valley mixing and find that Johnson noise and two-phonon processes limit relaxation at low and high temperature, respectively. We also investigate the effect of temperature on charge noise and find a linear dependence up to 4 K. These results contribute to the understanding of relaxation in silicon quantum dots and are promising for qubit operation at elevated temperatures.

Gate-controlled quantum dots and superconductivity in planar germanium

Superconductors and semiconductors are crucial platforms in the field of quantum computing. They can be combined to hybrids, bringing together physical properties that enable the discovery of new emergent phenomena and provide novel strategies for quantum control. The involved semiconductor materials, however, suffer from disorder, hyperfine interactions or lack of planar technology. Here we realise an approach that overcomes these issues altogether and integrate gate-defined quantum dots and superconductivity into germanium heterostructures. In our system, heavy holes with mobilities exceeding 500,000 cm2 (Vs)-1 are confined in shallow quantum wells that are directly contacted by annealed aluminium leads. We observe proximity-induced superconductivity in the quantum well and demonstrate electric gate-control of the supercurrent. Germanium therefore has great promise for fast and coherent quantum hardware and, being compatible with standard manufacturing, could become a leading material for quantum information processing.

A crossbar network for silicon quantum dot qubits

The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. To increase the number of qubits to the thousands or millions of qubits needed for practical quantum information, we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for nonplanar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates enable qubit addressability and readout. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning-noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.

A programmable two-qubit quantum processor in silicon

Now that it is possible to achieve measurement and control fidelities for individual quantum bits (qubits) above the threshold for fault tolerance, attention is moving towards the difficult task of scaling up the number of physical qubits to the large numbers that are needed for fault-tolerant quantum computing. In this context, quantum-dot-based spin qubits could have substantial advantages over other types of qubit owing to their potential for all-electrical operation and ability to be integrated at high density onto an industrial platform. Initialization, readout and single- and two-qubit gates have been demonstrated in various quantum-dot-based qubit representations. However, as seen with small-scale demonstrations of quantum computers using other types of qubit, combining these elements leads to challenges related to qubit crosstalk, state leakage, calibration and control hardware. Here we overcome these challenges by using carefully designed control techniques to demonstrate a programmable two-qubit quantum processor in a silicon device that can perform the Deutsch-Josza algorithm and the Grover search algorithm-canonical examples of quantum algorithms that outperform their classical analogues. We characterize the entanglement in our processor by using quantum-state tomography of Bell states, measuring state fidelities of 85-89 per cent and concurrences of 73-82 per cent. These results pave the way for larger-scale quantum computers that use spins confined to quantum dots.

A coherent spin-photon interface in silicon

Electron spins in silicon quantum dots are attractive systems for quantum computing owing to their long coherence times and the promise of rapid scaling of the number of dots in a system using semiconductor fabrication techniques. Although nearest-neighbour exchange coupling of two spins has been demonstrated, the interaction of spins via microwave-frequency photons could enable long-distance spin-spin coupling and connections between arbitrary pairs of qubits ('all-to-all' connectivity) in a spin-based quantum processor. Realizing coherent spin-photon coupling is challenging because of the small magnetic-dipole moment of a single spin, which limits magnetic-dipole coupling rates to less than 1 kilohertz. Here we demonstrate strong coupling between a single spin in silicon and a single microwave-frequency photon, with spin-photon coupling rates of more than 10 megahertz. The mechanism that enables the coherent spin-photon interactions is based on spin-charge hybridization in the presence of a magnetic-field gradient. In addition to spin-photon coupling, we demonstrate coherent control and dispersive readout of a single spin. These results open up a direct path to entangling single spins using microwave-frequency photons.

Strong spin-photon coupling in silicon

Long coherence times of single spins in silicon quantum dots make these systems highly attractive for quantum computation, but how to scale up spin qubit systems remains an open question. As a first step to address this issue, we demonstrate the strong coupling of a single electron spin and a single microwave photon. The electron spin is trapped in a silicon double quantum dot, and the microwave photon is stored in an on-chip high-impedance superconducting resonator. The electric field component of the cavity photon couples directly to the charge dipole of the electron in the double dot, and indirectly to the electron spin, through a strong local magnetic field gradient from a nearby micromagnet. Our results provide a route to realizing large networks of quantum dot-based spin qubit registers.

Spin decoherence in a two-qubit CPHASE gate: the critical role of tunneling noise

Rapid progress in semiconductor spin qubits has enabled experimental demonstrations of a two-qubit logic gate. Understanding spin decoherence in a two-qubit logic gate is necessary for optimal qubit operation. We study spin decoherence due to 1 / f charge noise for two electrons in a double quantum dot used for a two-qubit controlled-phase gate. In contrast to the usual belief, spin decoherence can be dominated by the tunneling noise from 1 / f charge noise instead of the detuning noise. Tunneling noise can dominate because the effect of tunneling noise on the spin qubit is first order in the charge admixture; while the effect of the detuning noise is only second order. The different orders of contributions result in different detuning dependence of the decoherence, which provides a way to identify the noise source. We find that decoherence in a recent two-qubit experiment was dominated by the tunneling noise from 1 / f charge noise. The results illustrate the importance of considering tunneling noise to design optimal operation of spin qubits.