Assembly of recombinant human immunodeficiency virus type 1 capsid protein in vitro

Effects of Gag mutation and processing on retroviral dimeric RNA maturation

After their release from host cells, most retroviral particles undergo a maturation process, which includes viral protein cleavage, core condensation, and increased stability of the viral RNA dimer. Inactivating the viral protease prevents protein cleavage; the resulting virions lack condensed cores and contain fragile RNA dimers. Therefore, protein cleavage is linked to virion morphological change and increased stability of the RNA dimer. However, it is unclear whether protein cleavage is sufficient for mediating virus RNA maturation. We have observed a novel phenotype in a murine leukemia virus capsid mutant, which has normal virion production, viral protein cleavage, and RNA packaging. However, this mutant also has immature virion morphology and contains a fragile RNA dimer, which is reminiscent of protease-deficient mutants. To our knowledge, this mutant provides the first evidence that Gag cleavage alone is not sufficient to promote RNA dimer maturation. To extend our study further, we examined a well-defined human immunodeficiency virus type 1 (HIV-1) Gag mutant that lacks a functional PTAP motif and produces immature virions without major defects in viral protein cleavage. We found that the viral RNA dimer in the PTAP mutant is more fragile and unstable compared with those from wild-type HIV-1. Based on the results of experiments using two different Gag mutants from two distinct retroviruses, we conclude that Gag cleavage is not sufficient for promoting RNA dimer maturation, and we propose that there is a link between the maturation of virion morphology and the viral RNA dimer.

Nucleic acid binding and chaperone properties of HIV-1 Gag and nucleocapsid proteins

The Gag polyprotein of HIV-1 is essential for retroviral replication and packaging. The nucleocapsid (NC) protein is the primary region for the interaction of Gag with nucleic acids. In this study, we examine the interactions of Gag and its NC cleavage products (NCp15, NCp9 and NCp7) with nucleic acids using solution and single molecule experiments. The NC cleavage products bound DNA with comparable affinity and strongly destabilized the DNA duplex. In contrast, the binding constant of Gag to DNA was found to be approximately 10-fold higher than that of the NC proteins, and its destabilizing effect on dsDNA was negligible. These findings are consistent with the primary function of Gag as a nucleic acid binding and packaging protein and the primary function of the NC proteins as nucleic acid chaperones. Also, our results suggest that NCp7's capability for fast sequence-nonspecific nucleic acid duplex destabilization, as well as its ability to facilitate nucleic acid strand annealing by inducing electrostatic attraction between strands, likely optimize the fully processed NC protein to facilitate complex nucleic acid secondary structure rearrangements. In contrast, Gag's stronger DNA binding and aggregation capabilities likely make it an effective chaperone for processes that do not require significant duplex destabilization.

Rescue of internal scaffold-deleted Mason-Pfizer monkey virus particle production by plasma membrane targeting

The Mason-Pfizer monkey virus (M-PMV) Gag protein follows a morphogenesis pathway in which immature capsids are preassembled within the cytoplasm before interaction with and budding through the plasma membrane. Intracytoplasmic assembly is facilitated by sequences within the p12 domain of Gag that we have termed the Internal Scaffold Domain (ISD). If M-PMV utilizes an ISD then what provides the equivalent function for most other retroviruses that assemble at the plasma membrane? To investigate the possibility that the membrane itself fulfills this role, we have combined functional deletion of the ISD with a mutation that disrupts intracellular targeting or with a plasma membrane targeting signal. By either modification, targeting of ISD-deleted Gag to the plasma membrane restores particle production. These results provide support for a model in which the plasma membrane and the D-type ISD provide an interchangeable scaffold-like function in retrovirus assembly.

Association of human immunodeficiency virus type 1 gag with membrane does not require highly basic sequences in the nucleocapsid: use of a novel Gag multimerization assay

Human immunodeficiency virus type 1 (HIV-1) particle production, a process driven by the Gag polyprotein precursor, occurs on the plasma membrane in most cell types. The plasma membrane contains cholesterol-enriched microdomains termed lipid rafts, which can be isolated as detergent-resistant membrane (DRM). Previously, we and others demonstrated that HIV-1 Gag is associated with DRM and that disruption of Gag-raft interactions impairs HIV-1 particle production. However, the determinants of Gag-raft association remain undefined. In this study, we developed a novel epitope-based Gag multimerization assay to examine whether Gag assembly is essential for its association with lipid rafts. We observed that membrane-associated, full-length Gag is poorly detected by immunoprecipitation relative to non-membrane-bound Gag. This poor detection is due to assembly-driven masking of Gag epitopes, as denaturation greatly improves immunoprecipitation. Gag mutants lacking the Gag-Gag interaction domain located in the N terminus of the nucleocapsid (NC) were efficiently immunoprecipitated without denaturation, indicating that the epitope masking is caused by higher-order Gag multimerization. We used this assay to examine the relationship between Gag assembly and Gag binding to total cellular membrane and DRM. Importantly, a multimerization-defective NC mutant displayed wild-type levels of membrane binding and DRM association, indicating that NC-mediated Gag multimerization is dispensable for association of Gag with membrane or DRM. We also demonstrate that different properties of sucrose and iodixanol membrane flotation gradients may explain some discrepancies regarding Gag-raft interactions. This report offers new insights into the association of HIV-1 Gag with membrane and with lipid rafts.

Effect of macromolecular crowding agents on human immunodeficiency virus type 1 capsid protein assembly in vitro

Previous studies on the self-assembly of capsid protein CA of human immunodeficiency virus type 1 (HIV-1) in vitro have provided important insights on the structure and assembly of the mature HIV-1 capsid. However, CA polymerization in vitro was previously observed to occur only at very high ionic strength. Here, we have analyzed the effects on CA assembly in vitro of adding unrelated, inert macromolecules (crowding agents), aimed at mimicking the crowded (very high macromolecular effective concentration) environment within the HIV-1 virion. Crowding agents induced fast and efficient polymerization of CA even at low (close to physiological) ionic strength. The hollow cylinders thus assembled were indistinguishable in shape and dimensions from those formed in dilute protein solutions at high ionic strength. However, two important differences were noted: (i) disassembly by dilution of the capsid-like particles was undetectable at very high ionic strength, but occurred rapidly at low ionic strength in the presence of a crowding agent, and (ii) a variant CA from a presumed infectious HIV-1 with mutations at the CA dimerization interface was unable to assemble at any ionic strength in the absence of a crowding agent; in contrast, this mutation allowed efficient assembly, even at low ionic strength, when a crowding agent was used. The use of a low ionic strength and inert macromolecules to mimic the crowded environment inside the HIV-1 virion may lead to a better in vitro evaluation of the effects of conditions, mutations or/and other molecules, including potential antiviral compounds, on HIV-1 capsid assembly, stability and disassembly.

Electrostatic Repulsion, Compensatory Mutations, and Long-range Non-additive Effects at the Dimerization Interface of the HIV Capsid Protein

In previous studies, thermodynamic dissection of the dimerization interface in CA-C, the C-terminal domain of the capsid protein of human immunodeficiency virus type 1, revealed that individual mutation to alanine of Ser178, Glu180, Glu187 or Gln192 led to significant increases in dimerization affinity. Four related aspects derived from this observation have been now addressed, and the results can be summarized as follows: (i) thermodynamic analyses indicate the presence of an intersubunit electrostatic repulsion between both Glu180 residues. (ii) The mutation Glu180 to Ala was detected in nearly all type 2 human immunodeficiency virus variants, and in several simian immunodeficiency viruses analyzed. However, this mutation was strictly co-variant with mutations Ser178Asp in a neighboring residue, and Glu187Gln. Thermodynamic analysis of multiple mutants showed that Ser178Asp compensated, alone or together with Glu187Gln, the increase in affinity caused by the mutation Glu180Ala, and restored a lower dimerization affinity. (iii) The increase in the affinity constant caused by the multiple mutation to Ala of Ser178, Glu180, Glu187 and Gln192 was more than one order of magnitude lower than predicted if additivity were present, despite the fact that the 178/180 pair and the two other residues were located more than 10A apart. (iv) Mutations in CA-C that caused non-additive increases in dimerization affinity also caused a non-additive increase in the capacity of the isolated CA-C domain to inhibit the assembly of capsid-like HIV-1 particles in kinetic assays. In summary, the study of a protein-protein interface involved in the building of a viral capsid has revealed unusual features, including intersubunit electrostatic repulsions, co-variant, compensatory mutations that may evolutionarily preserve a low association constant, and long-range, large magnitude non-additive effects on association.

Preserved antigenicity of HIV-1 p24 produced and purified in high yields from plants inoculated with a tobacco mosaic virus (TMV)-derived vector

Production of structural proteins from foot-and-mouth disease virus (FMDV) and bovine herpes virus (BHV-1) in Nicotiana benthamiana through the use of a tobacco mosaic virus-based vector (TMV-30B) has been reported previously. The development of the TMV-30B-HISc vector, a new version that adds a C-terminal histidine (His) sequence to the foreign protein expressed is described. Coding sequences from the FMDV VPl protein and the core protein, p24, from a clade C HIV-1 isolate from Zambia were cloned into the new vector and infective RNAs were generated for each construct to inoculate N. benthamiana plants. His-tagged proteins were purified from inoculated leaves using immobilized metal affinity chromatography (IMAC) as detected by Coomassie blue staining and proteins were further characterized in Western blot assays using a commercial anti-6xHis mAb and specific polyclonal antisera for each protein. While yields obtained for the VPl-His protein after purification were similar to those in crude extracts obtained with the previous TMV-VPl vector, p24-His yields were 10-15 times higher than those of VPl-His. Twenty-five grams of TMV-p24-HISc inoculated leaves were processed to obtain 2.5 mg of isolated p24-His and the recombinant protein was inoculated in rabbits to test immunogenicity and antigenic integrity of the plant-produced p24-His. Animals developed a strong and specific humoral response to the p24-His after the first booster and immune sera was able to recognize the native p24 from a different clade expressed on the surface of the HIV-1 chronically infected HUT78/ARV T-cell line. Importantly, the recombinant p24-His proved its efficiency by confirming the serology of 117 samples previously tested by two rapid HIV-1 tests, thus representing an excellent alternative for production of highly specific diagnostic reagents for HIV endemic regions in the developing world.

Investigation of N-Terminal Domain Charged Residues on the Assembly and Stability of HIV-1 CA†

The human immunodeficiency virus type 1 (HIV-1) capsid protein (CA) plays a crucial role in both assembly and maturation of the virion as well as viral infectivity. Previous in vivo experiments generated two N-terminal domain charge change mutants (E45A and E128A/R132A) that showed an increase in stability of the viral core. This increase in core stability resulted in decreased infectivity, suggesting the need for a delicate balance of favorable and unfavorable interactions to both allow assembly and facilitate uncoating following infection. Purified CA protein can be triggered to assemble into tubelike structures through the use of a high salt buffer system. The requirement for high salt suggests the need to overcome charge/charge repulsion between subunits. The mutations mentioned above lie within a highly charged region of the N-terminal domain of CA, away from any of the proposed protein/protein interaction sites. We constructed a number of charge mutants in this region (E45A, E45K, E128A, R132A, E128A/R132A, K131A, and K131E) and evaluated their effect on protein stability in addition to their effect on the rate of CA assembly. We find that the mutations alter the rate of assembly of CA without significantly changing the stability of the CA monomer. The changes in rate for the mutants studied are found to be due to varying degrees of electrostatic repulsion between the subunits of each mutant.

In vitro identification and characterization of an early complex linking HIV-1 genomic RNA recognition and Pr55Gag multimerization

The minimal protein requirements that drive virus-like particle formation of human immunodeficiency virus type 1 (HIV-1) have been established. The C-terminal domain of capsid (CTD-CA) and nucleocapsid (NC) are the most important domains in a so-called minimal Gag protein (mGag). The CTD is essential for Gag oligomerization. NC is known to bind and encapsidate HIV-1 genomic RNA. The spacer peptide, SP1, located between CA and NC is important for the multimerization process, viral maturation and recognition of HIV-1 genomic RNA by NC. In this study, we show that NC in the context of an mGag protein binds HIV-1 genomic RNA with almost 10-fold higher affinity. The protein region encompassing the 11th alpha-helix of CA and the proposed alpha-helix in the CA/SP1 boundary region play important roles in this increased binding capacity. Furthermore, sequences downstream from stem loop 4 of the HIV-1 genomic RNA are also important for this RNA-protein interaction. In gel shift assays using purified mGag and a model RNA spanning the region from +223 to +506 of HIV-1 genomic RNA, we have identified an early complex (EC) formation between 2 proteins and 1 RNA molecule. This EC was not present in experiments performed with a mutant mGag protein, which contains a CTD dimerization mutation (M318A). These data suggest that the dimerization interface of the CTD plays an important role in EC formation, and, as a consequence, in RNA-protein association and multimerization. We propose a model for the RNA-protein interaction, based on previous results and those presented in this study.

Assembly properties of the human immunodeficiency virus type 1 CA protein

During retroviral maturation, the CA protein oligomerizes to form a closed capsid that surrounds the viral genome. We have previously identified a series of deleterious surface mutations within human immunodeficiency virus type 1 (HIV-1) CA that alter infectivity, replication, and assembly in vivo. For this study, 27 recombinant CA proteins harboring 34 different mutations were tested for the ability to assemble into helical cylinders in vitro. These cylinders are composed of CA hexamers and are structural models for the mature viral capsid. Mutations that diminished CA assembly clustered within helices 1 and 2 in the N-terminal domain of CA and within the crystallographically defined dimer interface in the CA C-terminal domain. These mutations demonstrate the importance of these regions for CA cylinder production and, by analogy, mature capsid assembly. One CA mutant (R18A) assembled into cylinders, cones, and spheres. We suggest that these capsid shapes occur because the R18A mutation alters the frequency at which pentamers are incorporated into the hexagonal lattice. The fact that a single CA protein can simultaneously form all three known retroviral capsid morphologies supports the idea that these structures are organized on similar lattices and differ only in the distribution of 12 pentamers that allow them to close. In further support of this model, we demonstrate that the considerable morphological variation seen for conical HIV-1 capsids can be recapitulated in idealized capsid models by altering the distribution of pentamers.

Conservation of a stepwise, energy-sensitive pathway involving HP68 for assembly of primate lentivirus capsids in cells

Previously we have described a stepwise, energy-dependent pathway for human immunodeficiency virus type 1 (HIV-1) capsid assembly in a cell-free system. In this pathway, Gag polypeptides utilize the cellular factor HP68 and assemble into immature capsids by way of assembly intermediates that have defined biochemical characteristics. Here we address whether this pathway is universally conserved among primate lentiviruses and can be observed in mammalian cells. We demonstrate that HIV-2 Gag associates with human HP68 in a cell-free system and that Gag proteins of HIV-2, simian immunodeficiency virus SIVmac239, and SIVagm associate with endogenous HP68 in primate cells, as is seen for HIV-1. Analysis of primate cells expressing lentivirus Gag proteins revealed Gag-containing complexes with the same sedimentation values as seen for previously described HIV-1 assembly intermediates in the cell-free system (10S, 80-150S, and 500S). These complexes fit criteria for assembly intermediates as judged by energy sensitivity, pattern of HP68 association, and the failure of specific complexes to be formed by assembly-incompetent Gag mutants. We also demonstrate that virus-like particles released from cells do not appear to contain HP68, suggesting that HP68 is released from Gag upon completion of capsid assembly in cells, as was observed previously in the cell-free system. Together these findings support a model in which all primate lentivirus capsids assemble by a conserved pathway of HP68-containing, energy-dependent assembly intermediates that have specific biochemical features.

Antivirals interacting with hepatitis B virus core protein and core mutations may misdirect capsid assembly in a similar fashion

Recently, heteroarylpyrimidines (HAP) have been identified as potent inhibitors of capsid maturation. Here we discuss the HAP mode of action comparing the aggregation phenotype of wild-type and mutant core proteins with the respective phenotype imposed by HAP or other agents interacting with core protein. Pertinent tests include core fusion protein-mediated transactivation in a two-hybrid system and capsid formation. The finding that transactivation appeared to be unaffected by HAP, or by mutations preventing assembly, is surprising and raises the question for the structure of the interacting hybrid core proteins: Are they monomers, dimers or even oligomers? A direct activity of core fusion monomers is not excluded but considered to be highly unlikely due to rapid homodimerisation. A role of core fusion dimers in transactivation would indicate distinct interactions with a differential sensitivity to HAP. Regarding significance of data gained in two-hybrid systems, caution is necessary, since the site of transactivation is the nucleus, whereas the real site of the core protein interactions during replication is the cytoplasm. Apparently, HAP leave the monomer-monomer interface of HBV core protein unaffected but prevent capsid maturation by interacting with a region known to be crucial for dimer multimerisation and formation of stable capsids. It is suggested to use antivirals as tools for the elucidation of early steps in genome replication and capsid assembly. A frame for this could be the hypothesis that the virus uses soluble core protein, namely intracellular maturation intermediates of HbeAg for a core targeted self-restriction of replication.

The pH dependence of HIV-1 capsid assembly and its interaction with cyclophilin A

Immature HIV-1 virions have spherical cores which become conical due to cleavage of the capsid domain of Gag. Here, we have used an immature form of capsid and show by electron microscopy, atomic force microscopy and single angle light scattering that it aggregates to spherical cores resembling immature virions at high ionic strengths and at pH values above 6. Dynamic angle light scattering of the dissociated protein shows structural changes that promote oligomerization above pH 6. We then examined the role of the required host protein cyclophilin A on assembly. Cyclophilin A is incorporated into virions at a 1:10 cyclophilin A/capsid ratio. We find that although cyclophilin A does not affect the oligomerization rate or stability of immature capsid cores, it does bind strongly to immature capsid at physiological stoichiometry above pH 6. This association serves as an entry route of cyclophilin A into HIV-1 virions.

Role of HIV-1 Gag domains in viral assembly

After entry of the human immunodeficiency virus type 1 (HIV-1) into T cells and the subsequent synthesis of viral products, viral proteins and RNA must somehow find each other in the host cells and assemble on the plasma membrane to form the budding viral particle. In this general review of HIV-1 assembly, we present a brief overview of the HIV life cycle and then discuss assembly of the HIV Gag polyprotein on RNA and membrane substrates from a biochemical perspective. The role of the domains of Gag in targeting to the plasma membrane and the role of the cellular host protein cyclophilin are also reviewed.

Three-dimensional structure of the M-MuLV CA protein on a lipid monolayer: a general model for retroviral capsid assembly

Although retroviruses from different genera form morphologically distinct capsids, we have proposed that all of these structures are composed of similar hexameric arrays of capsid (CA) protein subunits and that their distinct morphologies reflect different distributions of pentameric declinations that allow the structures to close. Consistent with this model, CA proteins from both HIV-1 and Rous sarcoma virus (RSV) form similar hexagonal lattices. However, recent structural studies have suggested that the Moloney murine leukemia virus (M-MuLV) CA protein may assemble differently. We now report an independent three-dimensional reconstruction of two-dimensional crystals of M-MuLV CA. This new reconstruction reveals a hexameric lattice that is similar to those formed by HIV-1 and RSV CA, supporting a generalized model for retroviral capsid assembly.

Charged assembly helix motif in murine leukemia virus capsid: an important region for virus assembly and particle size determination

We have identified a region near the C terminus of capsid (CA) of murine leukemia virus (MLV) that contains many charged residues. This motif is conserved in various lengths in most MLV-like viruses. One exception is that spleen necrosis virus (SNV) does not contain a well-defined domain of charged residues. When 33 amino acids of the MLV motif were deleted to mimic SNV CA, the resulting mutant produced drastically reduced amounts of virions and the virions were noninfectious. Furthermore, these viruses had abnormal sizes, often contained punctate structures resembling those in the cell cytoplasm, and packaged both ribosomal and viral RNA. When 11 or 15 amino acids were deleted to modify the MLV CA to resemble those from other gammaretroviruses, the deletion mutants produced virions at levels comparable to those of the wild-type virus and were able to complete one round of virus replication without detectable defects. We generated 10 more mutants that displayed either the wild-type or mutant phenotype. The distribution of the wild-type or mutant phenotype did not directly correlate with the number of amino acids deleted, suggesting that the function of the motif is determined not simply by its length but also by its structure. Structural modeling of the wild-type and mutant proteins suggested that this region forms alpha-helices; thus, we termed this motif the "charged assembly helix." This is the first description of the charged assembly helix motif in MLV CA and demonstration of its role in virus budding and assembly.

Functional surfaces of the human immunodeficiency virus type 1 capsid protein

The human immunodeficiency virus type 1 initially assembles and buds as an immature particle that is organized by the viral Gag polyprotein. Gag is then proteolyzed to produce the smaller capsid protein CA, which forms the central conical capsid that surrounds the RNA genome in the mature, infectious virus. To define CA surfaces that function at different stages of the viral life cycle, a total of 48 different alanine-scanning surface mutations in CA were tested for their effects on Gag protein expression, processing, particle production and morphology, capsid assembly, and infectivity. The 27 detrimental mutations fall into three classes: 13 mutations significantly diminished or altered particle production, 9 mutations failed to assemble normal capsids, and 5 mutations supported normal viral assembly but were nevertheless reduced more than 20-fold in infectivity. The locations of the assembly-defective mutations implicate three different CA surfaces in immature particle assembly: one surface encompasses helices 4 to 6 in the CA N-terminal domain (NTD), a second surrounds the crystallographically defined CA dimer interface in the C-terminal domain (CTD), and a third surrounds the loop preceding helix 8 at the base of the CTD. Mature capsid formation required a distinct surface encompassing helices 1 to 3 in the NTD, in good agreement with a recent structural model for the viral capsid. Finally, the identification of replication-defective mutants with normal viral assembly phenotypes indicates that CA also performs important nonstructural functions at early stages of the viral life cycle.

Elimination of protease activity restores efficient virion production to a human immunodeficiency virus type 1 nucleocapsid deletion mutant

The nucleocapsid (NC) region of human immunodeficiency virus type 1 (HIV-1) Gag is required for specific genomic RNA packaging. To determine if NC is absolutely required for virion formation, we deleted all but seven amino acids from NC in a full-length NL4-3 proviral clone. This construct, DelNC, produced approximately four- to sixfold fewer virions than did the wild type, and these virions were noninfectious (less than 10(-6) relative to the wild type) and severely genomic RNA deficient. Immunoblot and high-pressure liquid chromatography analyses showed that all of the mature Gag proteins except NC were present in the mutant virion preparations, although there was a modest decrease in Gag processing. DelNC virions had lower densities and were more heterogeneous than wild-type particles, consistent with a defect in the interaction assembly or I domain. Electron microscopy showed that the DelNC virions displayed a variety of aberrant morphological forms. Inactivating the protease activity of DelNC by mutation or protease inhibitor treatment restored virion production to wild-type levels. DelNC-protease mutants formed immature-appearing particles that were as dense as wild-type virions without incorporating genomic RNA. Therefore, protease activity combined with the absence of NC causes the defect in DelNC virion production, suggesting that premature processing of Gag during assembly causes this effect. These results show that HIV-1 can form particles efficiently without NC.

Antiviral inhibition of the HIV-1 capsid protein

During the assembly stage of the human immunodeficiency virus (HIV) replication cycle, several thousand copies of the viral Gag polyprotein associate at the cell membrane and bud to form an immature, non-infectious virion. Gag is subsequently cleaved by the protease, which liberates the capsid proteins for assembly into the polyprotein shell of the central core particle (or capsid) of the mature virus. Viral infectivity is critically dependent on capsid formation and stability, making the capsid protein a potentially attractive antiviral target. We have identified compounds that bind to an apical site on the N-terminal domain of the HIV-1 capsid protein and inhibit capsid assembly in vitro. One compound, N-(3-chloro-4-methylphenyl)-N'-[2-[([5-[(dimethylamino)-methyl]-2-furyl]-methyl)-sulfanyl]ethyl]urea) (CAP-1), is well tolerated in cell cultures, enabling in vivo antiviral and mechanistic studies. CAP-1 inhibits HIV-1 infectivity in a dose-dependent manner, but does not interfere with viral entry, reverse transcription, integration, proteolytic processing, or virus production, indicating a novel antiviral mechanism. Significantly, virus particles generated in the presence of CAP-1 exhibit heterogeneous sizes and abnormal core morphologies, consistent with inhibited CA-CA interactions during virus assembly and maturation. These findings lay the groundwork for the development of assembly inhibitors as a new class of therapeutic agents for the treatment of AIDS.

Structural organization of authentic, mature HIV-1 virions and cores

Mature, infectious HIV-1 particles contain a characteristic cone-shaped core that encases the viral RNA and replication proteins. The architectures of mature virions and isolated cores were studied using cryo-electron microscopy. The average size ( approximately 145 nm) of the virion was unchanged during maturation. Most virions contained a single core but roughly one-third contained two or more cores. Consideration of the capsid protein concentration during core assembly indicated that core formation in vivo is template-mediated rather than concentration-driven. Although most cores were conical, 7% were tubular. These displayed a stacked-disc arrangement with 7-, 8-, 9- or 10-fold axial symmetry. Layer line filtration of these images showed that the capsid subunit arrangement is consistent with a 9.6 nm hexamer resembling that previously seen in the helical tubes assembled from purified capsid protein. A common reflection (1/3.2 nm) shared between the tubular and conical cores suggested they share a similar organization. The extraordinary flexibility observed in the assembly of the mature core appears to be well suited to accommodating variation and hence there may be no single structure for the infectious virion.

Homo-oligomerization of the porcine reproductive and respiratory syndrome virus nucleocapsid protein and the role of disulfide linkages

As a step toward understanding the assembly pathway of the porcine reproductive and respiratory syndrome virus (PRRSV), the oligomeric properties of the nucleocapsid (N) protein were investigated. In this study, we have demonstrated that under nonreducing conditions the N protein forms disulfide-linked homodimers. However, inclusion of an alkylating agent (N-ethylmaleimide [NEM]) prevented disulfide bond formation, suggesting that these intermolecular disulfide linkages were formed as a result of spurious oxidation during cell lysis. In contrast, N protein homodimers isolated from extracellular virions were shown to have formed NEM-resistant intermolecular disulfide linkages, the function of which is probably to impart stability to the virion. Pulse-chase analysis revealed that N protein homodimers become specifically disulfide linked within the virus-infected cell, albeit at the later stages of infection, conceivably when the virus particle buds into the oxidizing environment of the endoplasmic reticulum. Moreover, NEM-resistant disulfide linkages were shown to occur only during productive PRRSV infection, since expression of recombinant N protein did not result in the formation of NEM-resistant disulfide-linked homodimers. Mutational analysis indicated that of the three conserved cysteine residues in the N protein, only the cysteine at position 23 was involved in the formation of disulfide linkages. The N protein dimer was shown to be stable both in the presence and absence of intermolecular disulfide linkages, indicating that noncovalent interactions also play a role in dimerization. Non-disulfide-mediated N protein interactions were subsequently demonstrated both in vitro by the glutathione S-transferase (GST) pull-down assay and in vivo by the mammalian two-hybrid assay. Using a series of N protein deletion mutants fused to GST, amino acids 30 to 37 were shown to be essential for N-N interactions. Furthermore, since RNase A treatment markedly decreased N protein-binding affinity, it appears that at least in vitro, RNA may be involved in bridging N-N interactions. In cross-linking experiments, the N protein was shown to assemble into higher-order structures, including dimers, trimers, tetramers, and pentamers. Together, these findings demonstrate that the N protein possesses self-associative properties, and these likely provide the basis for PRRSV nucleocapsid assembly.

Retrovirus capsid protein assembly arrangements

During retrovirus particle assembly and morphogenesis, the retrovirus structural (Gag) proteins organize into two different arrangements: an immature form assembled by precursor Gag (PrGag) proteins; and a mature form, composed of proteins processed from PrGag. Central to both Gag protein arrangements is the capsid (CA) protein, a domain of PrGag, which is cleaved from the precursor to yield a mature Gag protein composed of an N-terminal domain (NTD), a flexible linker region, and a C-terminal domain (CTD). Because Gag interactions have proven difficult to examine in virions, a number of investigations have focused on the analysis of structures assembled in vitro. We have used electron microscope (EM) image reconstruction techniques to examine assembly products formed by two different CA variants of both human immunodeficiency virus type 1 (HIV-1) and the Moloney murine leukemia virus (M-MuLV). Interestingly, two types of hexameric protein arrangements were observed for each virus type. One organizational scheme featured hexamers composed of putative NTD dimer subunits, with sharing of subunits between neighbor hexamers. The second arrangement used apparent NTD monomers to coordinate hexamers, involved no subunit sharing, and employed putative CTD interactions to connect hexamers. Conversion between the two assembly forms may be achieved by making or breaking the proposed symmetric NTD dimer contacts in a process that appears to mimic viral morphogenesis.

Mapping of protein:protein contact surfaces by hydrogen/deuterium exchange, followed by on-line high-performance liquid chromatography-electrospray ionization Fourier-transform ion-cyclotron-resonance mass analysis

For protein complexes too large, uncrystallizable/insoluble, or low concentration for conventional X-ray diffraction or nuclear magnetic resonance analysis, the contact surface(s) may be mapped by comparing H/2H exchange rate (and thus solvent accessibility) of backbone amide hydrogens in free vs. complexed protein(s). The protein is first exposed to 2H2O, allowed to exchange for each of several reaction periods, and then digested with pepsin. The extent and rate of H/2H exchange is determined by measuring the increase in mass with H/2H exchange period for each of the peptides. Here, we present an experimental protocol that combines rapid (to minimize back-exchange) HPLC front-end separation with ultrahigh-resolution mass analysis (needed to distinguish the isotopic distributions of dozens of peptides simultaneously). The method is used to study the assembled human immunodeficiency virus type capsid protein (CA) and its soluble form.

Tripeptide interference with human immunodeficiency virus type 1 morphogenesis

Capsid assembly during virus replication is a potential target for antiviral therapy. The Gag polyprotein is the main structural component of retroviral particles, and in human immunodeficiency virus type 1 (HIV-1), it contains the sequences for the matrix, capsid, nucleocapsid, and several small polypeptides. Here, we report that at a concentration of 100 micro M, 7 of 83 tripeptide amides from the carboxyl-terminal sequence of the HIV-1 capsid protein p24 suppressed HIV-1 replication (>80%). The three most potent tripeptides, glycyl-prolyl-glycine-amide (GPG-NH(2)), alanyl-leucyl-glycine-amide (ALG-NH(2)), and arginyl-glutaminyl-glycine-amide (RQG-NH(2)), were found to interact with p24. With electron microscopy, disarranged core structures of HIV-1 progeny were extensively observed when the cells were treated with GPG-NH(2) and ALG-NH(2). Furthermore, nodular structures of approximately the same size as the broad end of HIV-1 conical capsids were observed at the plasma membranes of treated cells only, possibly indicating an arrest of the budding process. Corresponding tripeptides with nonamidated carboxyl termini were not biologically active and did not interact with p24.

The Mason-Pfizer monkey virus internal scaffold domain enables in vitro assembly of human immunodeficiency virus type 1 Gag

The Mason-Pfizer monkey virus (M-PMV) Gag protein possesses the ability to assemble into an immature capsid when synthesized in a reticulocyte lysate translation system. In contrast, the human immunodeficiency virus (HIV) Gag protein is incapable of assembly in parallel assays. To enable the assembly of HIV Gag, we have combined or inserted regions of M-PMV Gag into HIV Gag. By both biochemical and morphological criteria, several of these chimeric Gag molecules are capable of assembly into immature capsid-like structures in this in vitro system. Chimeric species containing large regions of M-PMV Gag fused to HIV Gag sequences failed to assemble, while species consisting of only the M-PMV p12 region, and its internal scaffold domain (ISD), fused to HIV Gag were capable of assembly, albeit at reduced kinetics compared to M-PMV Gag. The ability of the ISD to induce assembly of HIV Gag, which normally assembles at the plasma membrane, suggests a common requirement for a concentrating factor in retrovirus assembly. Despite the dramatic effect of the ISD on chimera assembly, the function of HIV Gag domains in that process was found to remain essential, since an assembly-defective mutant of HIV CA, M185A, abolished assembly when introduced into the chimera. This continued requirement for HIV Gag domain function in the assembly of chimeric molecules will allow this in vitro system to be used for the analysis of potential inhibitors of HIV immature particle assembly.

Expression, purification, and characterization of an anti-RBCFab-p24 fusion protein for hemagglutination-based rapid detection of antibodies to HIV in whole blood

A fusion protein A41Fabp246 consisting of Fab of an anti-RBC MAb A41 and amino acids 8-153 of HIV-1 p24 (p246) fused at the C-terminus of A41Fd was purified following assembly of A41Fdp246 with A41 LC in vitro, using a denaturation- renaturation protocol and a 4-step column chromatography procedure. The highly purified, monomeric A41Fabp246 was then evaluated for hemagglutination-based detection of anti-p24 antibodies using sera from HIV-infected individuals. This derivative of p24 is devoid of maximum homology region and the C-terminal domain of p24, which is responsible for oligomerization of p24, but retains full complement of immunodominant epitopes. This new fusion protein in combination with fusion proteins consisting of monovalent fragment of another anti-human RBC antibody fused to immunodominant regions of envelope glycoproteins of HIV-1 and HIV-2 should be useful in preparing a cocktail of reagents for highly sensitive detection of anti-HIV antibodies in whole blood.

Kinetic analysis of the role of intersubunit interactions in human immunodeficiency virus type 1 capsid protein assembly in vitro

The human immunodeficiency virus type 1 (HIV-1) capsid protein (CA) plays a crucial role in both assembly and maturation of the virion. Numerous recent studies have focused on either the soluble form of CA or the polymer end product of in vitro CA assembly. The CA polymer, in particular, has been used to study CA-CA interactions because it is a good model for the CA interactions within the virion core. However, analysis of the process of in vitro CA assembly can yield valuable insights into CA-CA interactions and the mechanism of core assembly. We describe here a method for the analysis of CA assembly kinetics wherein the progress of assembly is monitored by using turbidity. At pH 7.0 the addition of either of the isolated CA domains (i.e., the N or the C domain) to an assembly reaction caused a decrease in the assembly rate by competing for binding to the full-length CA protein. At pH 8.0 the addition of the isolated C domain had a similar inhibitory affect on CA assembly. However, at pH 8.0 the isolated N domain had no affect on the rate of CA assembly but, when mixed with the C domain, it alleviated the C-domain inhibition. These data provide biochemical evidence for a pH-sensitive homotypic N-domain interaction, as well as for an N- and C-domain interaction.

Hexagonal organization of Moloney murine leukemia virus capsid proteins

To help elucidate the mechanisms by which retrovirus structural proteins associate to form virus particles, we have examined membrane-bound assemblies of Moloney murine leukemia virus (M-MuLV) capsid (CA) proteins. Electron microscopy and image reconstruction techniques showed that CA dimers appear to function as organizational subunits of the cage-like, membrane-bound protein arrays. However, new three-dimensional (3D) data also were consistent with hexagonal (p6) assembly models. The p6 3D reconstructions of membrane-bound M-MuLV CA proteins gave unit cells of a = b = 80.3 A, c = 110 A, gamma = 120 degrees, in which six dimer units formed a cage lattice. Neighbor cage hole-to-hole distances were 45 A, while distances between hexagonal cage holes corresponded to unit cell lengths (80.3 A). The hexagonal model predicts two types of cage holes (trimer and hexamer holes), uses symmetric head-to-head dimer building blocks, and permits the introduction of lattice curvature by conversion of hexamer to pentamer units. The M-MuLV CA lattice is similar to those formed in helical tubes by HIV CA in that hexamer units surround cage holes of 25-30 A, but differs in that M-MuLV hexamer units appear to be CA dimers, whereas HIV CA units appear to be monomers. These results suggest that while general assembly principles apply to different retroviruses, clear assembly distinctions exist between these virus types.

Rous sarcoma virus Gag protein-oligonucleotide interaction suggests a critical role for protein dimer formation in assembly

The structural protein Gag is the only viral product required for retrovirus assembly. Purified Gag proteins or fragments of Gag are able in vitro to spontaneously form particles resembling immature virions, but this process requires nucleic acid, as well as the nucleocapsid domain of Gag. To examine the role of nucleic acid in the assembly in vitro, we used a purified, slightly truncated version of the Rous sarcoma virus Gag protein, Delta MBD Delta PR, and DNA oligonucleotides composed of the simple repeating sequence GT. Apparent binding constants were determined for oligonucleotides of different lengths, and from these values the binding site size of the protein on the DNA was calculated. The ability of the oligonucleotides to promote assembly in vitro was assessed with a quantitative assay based on electron microscopy. We found that excess zinc or magnesium ion inhibited the formation of virus-like particles without interfering with protein-DNA binding, implying that interaction with nucleic acid is necessary but not sufficient for assembly in vitro. The binding site size of the Delta MBD Delta PR protein, purified in the presence of EDTA to remove zinc ions at the two cysteine-histidine motifs, was estimated to be 11 nucleotides (nt). This value decreased to 8 nt when the protein was purified in the presence of low concentrations of zinc ions. The minimum length of DNA oligonucleotide that promoted efficient assembly in vitro was 22 nt for the zinc-free form of the protein and 16 nt for the zinc-bound form. To account for this striking 1:2 ratio between binding site size and oligonucleotide length requirement, we propose a model in which the role of nucleic acid in assembly is to promote formation of a species of Gag dimer, which itself is a critical intermediate in the polymerizaton of Gag to form the protein shell of the immature virion.

Molecular organization of Mason-Pfizer monkey virus capsids assembled from Gag polyprotein in Escherichia coli

We describe the results of a study by electron microscopy and image processing of Gag protein shells-immature capsids--of Mason-Pfizer monkey virus assembled in Escherichia coli from two truncated forms of the Gag precursor: Deltap4Gag, in which the C-terminal p4Gag was deleted, and Pro(-)CA.NC, in which the N-terminal peptides and proline 1 of the CA domain were deleted. Negative staining of capsids revealed small patches of holes forming a trigonal or hexagonal pattern most clearly visible on occasional tubular forms. The center-to-center spacing of holes in the network was 7.1 nm in Deltap4Gag capsids and 7.4 nm in Pro(-)CA.NC capsids. Image processing of Deltap4Gag tubes revealed a hexagonal network of holes formed by six subunits with a single subunit shared between rings. This organization suggests that the six subunits are contributed by three trimers of the truncated Gag precursor. Similar molecular organization was observed in negatively stained Pro(-)CA.NC capsids. Shadowed replicas of freeze-etched capsids produced by either construct confirmed the presence of a hexagonal network of holes with a similar center-to-center spacing. We conclude that the basic building block of the cage-like network is a trimer of the Deltap4Gag or Pro(-)CA.NC domains. In addition, our results point to a key role of structurally constrained CA domain in the trimeric interaction of the Gag polyprotein.

Comparison of classical and affinity purification techniques of Mason-Pfizer monkey virus capsid protein: the alteration of the product by an affinity tag

The efficiencies of different procedures for purification of the capsid protein (CA) of Mason-Pfizer monkey virus are compared. Plasmids encoding both wild-type CA and two C-terminally modified sequences of CA suitable for affinity chromatography purification were prepared. CA was expressed in Escherichia coli (i) as a wild-type protein, (ii) C-terminally extended with a six-histidine tag (CA 6His), and (iii) as a protein containing a C-terminal fusion to a viral protease cleavage site followed by a six-histidine tag (CA 6aa6His). Electron microscopy was used for comparison of the resulting proteins, as CA is a structural protein with no enzymatic activity. We have found that these C-terminal fusions dramatically influenced the properties and morphology of structures formed by CA protein in E. coli. The formation of amorphous aggregates of CA was abolished and CA 6His and CA 6aa6His proteins formed organized structures. CA and CA 6aa6His accumulated in bacteria in inclusion bodies as insoluble proteins, CA 6His was found in a soluble form. Both six-histidine-tagged proteins were purified using affinity chromatography under either native (CA 6His) or denaturing (CA 6aa6His) conditions. CA protein was purified under denaturing conditions using gel-filtration chromatography followed by refolding. All proteins were obtained at a purity >98%. Both aforementioned C-terminal extensions led to dramatic changes in behavior of the products and they also affected the tendency to form organized structures within E. coli. We show here that the widely used histidine anchor may significantly alter the properties of the protein of interest.

Tsg101, a homologue of ubiquitin-conjugating (E2) enzymes, binds the L domain in HIV type 1 Pr55(Gag)

Ubiquitination appears to be involved in virus particle release from infected cells. Free ubiquitin (Ub), as well as Ub covalently bound to a small fraction of p6 Gag, is detected in mature HIV particles. Here we report that the p6 region in the Pr55(Gag) structural precursor polyprotein binds to Tsg101, a putative Ub regulator that is involved in trafficking of plasma membrane-associated proteins. Tsg101 was found to interact with Gag in (i) a yeast two-hybrid assay, (ii) in vitro coimmunoprecipitation by using purified Pr55(Gag) and rabbit reticulocyte lysate-synthesized Tsg101, and (iii) in vivo in the cytoplasm of COS cells transfected with gag. The PTAPP motif [or late (L) domain] within p6, which is required for release of mature virus from the plasma membrane, was the determinant for binding Pr55(Gag). The N-terminal region in Tsg101, which is homologous to the Ubc4 class of Ub-conjugating (E2) enzymes, was the determinant of interaction with p6. Mutation of Tyr-110 in Tsg101, present in place of the active-site Cys that binds Ub in E2 enzymes, and other residues unique to Tsg101, impaired p6 interaction, indicating that features that distinguish Tsg101 from active E2 enzymes were important for binding the viral protein. The results link L-domain function in HIV to the Ub machinery and a specific component of the cellular trafficking apparatus.

HIV-1 capsid protein forms spherical (immature-like) and tubular (mature-like) particles in vitro: structure switching by pH-induced conformational changes

The viral genome and replicative enzymes of the human immunodeficiency virus are encased in a shell consisting of assembled mature capsid protein (CA). The core shell is a stable, effective protective barrier, but is also poised for dissolution on cue to allow transmission of the viral genome into its new host. In this study, static light scattering (SLS) and dynamic light scattering (DLS) were used to examine the entire range of the CA protein response to an environmental cue (pH). The CA protein assembled tubular structures as previously reported but also was capable of assembling spheres, depending on the pH of the protein solution. The switch from formation of one to the other occurred within a very narrow physiological pH range (i.e., pH 7.0 to pH 6.8). Below this range, only dimers were detected. Above this range, the previously described tubular structures were detected. The ability of the CA protein to form a spherical structure that is detectable by DLS but not by electron microscopy indicates that some assemblages are inherently sensitive to perturbation. The dimers in equilibrium with these assemblages exhibited distinct conformations: Dimers in equilibrium with the spherical form exhibited a compact conformation. Dimers in equilibrium with the rod-like form had an extended conformation. Thus, the CA protein possesses the inherent ability to form metastable structures, the morphology of which is regulated by an environmentally-sensitive molecular switch. Such metastable structures may exist as transient intermediates during the assembly and/or disassembly of the virus core.

Mapping of hiv-1 Gag epitopes recognized by polyclonal antibodies using gene-fragment phage display system

Phage display has emerged as a powerful technique for mapping epitopes recognised by monoclonal and polyclonal antibodies. We have recently developed a simple gene-fragment phage display system and have shown its utility in mapping epitope recognised by a monoclonal antibody. In the present study, we have employed this system in mapping epitopes recognised by polyclonal antibodies raised against HIV-1 capsid protein, p24 which is derived from proteolytic cleavage of Gag polyprotein. HIV-1 gag DNA was fragmented by DNase I and the fragments (50-250 bp) were cloned into gene-fragment phage display vector to construct a library of phages displaying peptides. This phage library was used for affinity selection of phages displaying epitopes recognised by rabbit anti-p24 polyclonal antibodies. Selected phages contained sequences from two discrete regions of p24, demonstrating the presence of two antigenic regions. The DNA sequences encoding these regions were also cloned and expressed as GST fusion proteins. The immunoreactivity of these epitopes as GST fusion proteins, or as phage-displayed peptides, was comparable in ELISA system using same anti-p24 polyclonal antibodies. The results indicate that the gene-fragment based phage display system can be used efficiently to identify epitopes recognised by polyclonal antibodies, and phage displayed epitopes can be directly employed in ELISA to detect antibodies.

Characterization of Rous sarcoma virus Gag particles assembled in vitro

Purified retrovirus Gag proteins or Gag protein fragments are able to assemble into virus-like particles (VLPs) in vitro in the presence of RNA. We have examined the role of nucleic acid and of the NC domain in assembly of VLPs from a Rous sarcoma virus (RSV) Gag protein and have characterized these VLPs using transmission electron microscopy (TEM), scanning TEM (STEM), and cryoelectron microscopy (cryo-EM). RNAs of diverse sizes, single-stranded DNA oligonucleotides as small as 22 nucleotides, double-stranded DNA, and heparin all promoted efficient assembly. The percentages of nucleic acid by mass, in the VLPs varied from 5 to 8%. The mean mass of VLPs, as determined by STEM, was 6.5 x 10(7) Da for both RNA-containing and DNA oligonucleotide-containing particles, corresponding to a stoichiometry of about 1,200 protein molecules per VLP, slightly lower than the 1,500 Gag molecules estimated previously for infectious RSV. By cryo-EM, the VLPs showed the characteristic morphology of immature retroviruses, with discernible regions of high density corresponding to the two domains of the CA protein. In spherically averaged density distributions, the mean radial distance to the density corresponding to the C-terminal domain of CA was 33 nm, considerably smaller than that of equivalent human immunodeficiency virus type 1 particles. Deletions of the distal portion of NC, including the second Zn-binding motif, had little effect on assembly, but deletions including the charged residues between the two Zn-binding motifs abrogated assembly. Mutation of the cysteine and histidine residues in the first Zn-binding motif to alanine did not affect assembly, but mutation of the basic residues between the two Zn-binding motifs, or of the basic residues in the N-terminal portion of NC, abrogated assembly. Together, these findings establish VLPs as a good model for immature virions and establish a foundation for dissection of the interactions that lead to assembly.

Role of the Rous sarcoma virus p10 domain in shape determination of gag virus-like particles assembled in vitro and within Escherichia coli

Purified retrovirus Gag proteins can assemble in vitro into virus-like particles (VLPs) in the presence of RNA. It was shown previously that a Rous sarcoma virus Gag protein missing only the protease domain forms spherical particles resembling immature virions lacking a membrane but that a similar protein missing the p10 domain forms tubular particles. Thus, p10 plays a role in spherical particle formation. To further study this shape-determining function, we dissected the p10 domain by mutagenesis and examined VLPs assembled within Escherichia coli or assembled in vitro from purified proteins. The results identified a minimal contiguous segment of 25 amino acid residues at the C terminus of p10 that is sufficient to restore efficient spherical assembly to a p10 deletion mutant. Random and site-directed mutations were introduced into this segment of polypeptide, and the shapes of particles formed in E. coli were examined in crude extracts by electron microscopy. Three phenotypes were observed: tubular morphology, spherical morphology, or no regular structure. While the particle morphology visualized in crude extracts generally was the same as that visualized for purified proteins, some tubular mutants scored as spherical when tested as purified proteins, suggesting that a cellular factor may also play a role in shape determination. We also examined the assembly properties of smaller Gag proteins consisting of the capsid protein-nucleocapsid protein (CA-NC) domains with short N-terminal extensions or deletions. Addition of one or three residues allowed CA-NC to form spheres instead of tubes in vitro, but the efficiency of assembly was extremely low. Deletion of the N-terminal residue(s) abrogated assembly. Taken together, these results imply that the N terminus of CA and the adjacent upstream 25 residues play an important role in the polymerization of the Gag protein.

Image reconstructions of helical assemblies of the HIV-1 CA protein

The type 1 human immunodeficiency virus (HIV-1) contains a conical capsid comprising approximately 1,500 CA protein subunits, which organizes the viral RNA genome for uncoating and replication in a new host cell. In vitro, CA spontaneously assembles into helical tubes and cones that resemble authentic viral capsids. Here we describe electron cryo-microscopy and image reconstructions of CA tubes from six different helical families. In spite of their polymorphism, all tubes are composed of hexameric rings of CA arranged with approximate local p6 lattice symmetry. Crystal structures of the two CA domains were 'docked' into the reconstructed density, which showed that the amino-terminal domains form the hexameric rings and the carboxy-terminal dimerization domains connect each ring to six neighbours. We propose a molecular model for the HIV-1 capsid that follows the principles of a fullerene cone, in which the body of the cone is composed of curved hexagonal arrays of CA rings and the ends are closed by inclusion of 12 pentagonal 'defects'.

Three-dimensional organization of retroviral capsid proteins on a lipid monolayer

We have used a method for the two-dimensional crystallization of retroviral structural proteins to obtain a three-dimensional structure of negatively stained, membrane-bound, histidine-tagged Moloney murine leukemia virus (M-MuLV) capsid protein (his-MoCA) arrays. Tilted and untilted micrographs from crystals formed by purified his-MoCA proteins incubated beneath lipid monolayers containing nickel-chelating lipids were used in 3D reconstructions. The 2D crystals had unit cell dimensions of a=72.6 A, b=72.5 A and gamma=119.5 degrees, but appeared to have no intrinsic symmetry (p1) in 3D, in contrast to the trigonal or hexagonal appearance of their 2D projections. Membrane-bound his-MoCA proteins showed a strand-like organization, apparently with dimer building blocks. Membrane-proximal regions, or putative N-terminal domains (NTDs), dimerized with different partners than the membrane-distal putative C-terminal domains (CTDs). Evidence also suggests that CTDs can adopt alternate orientations relative to their NTDs, forming interstrand connections. Our results are consistent with helical-spiral models for retrovirus particle assembly, but are not easily reconcilable with icosahedral models.

Analysis of Mason-Pfizer monkey virus Gag domains required for capsid assembly in bacteria: role of the N-terminal proline residue of CA in directing particle shape

Mason-Pfizer monkey virus (M-PMV) preassembles immature capsids in the cytoplasm prior to transporting them to the plasma membrane. Expression of the M-PMV Gag precursor in bacteria results in the assembly of capsids indistinguishable from those assembled in mammalian cells. We have used this system to investigate the structural requirements for the assembly of Gag precursors into procapsids. A series of C- and N-terminal deletion mutants progressively lacking each of the mature Gag domains (matrix protein [MA]-pp24/16-p12-capsid protein [CA]-nucleocapsid protein [NC]-p4) were constructed and expressed in bacteria. The results demonstrate that both the CA and the NC domains are necessary for the assembly of macromolecular arrays (sheets) but that amino acid residues at the N terminus of CA define the assembly of spherical capsids. The role of these N-terminal domains is not based on a specific amino acid sequence, since both MA-CA-NC and p12-CA-NC polyproteins efficiently assemble into capsids. Residues N terminal of CA appear to prevent a conformational change in which the N-terminal proline plays a key role, since the expression of a CA-NC protein lacking this proline results in the assembly of spherical capsids in place of the sheets assembled by the CA-NC protein.

Infectivity of Moloney murine leukemia virus defective in late assembly events is restored by late assembly domains of other retroviruses

The p12 region of the Moloney murine leukemia virus (M-MuLV) Gag protein contains a PPPY motif important for efficient virion assembly and release. To probe the function of the PPPY motif, a series of insertions of homologous and heterologous motifs from other retroviruses were introduced at various positions in a mutant gag gene lacking the PPPY motif. The assembly defects of the PPPY deletion mutant could be rescued by insertion of a wild-type PPPY motif and flanking sequences at several ectopic positions in the Gag protein. The late assembly domain (L-domain) of Rous sarcoma virus (RSV) or human immunodeficiency virus type 1 (HIV-1) could also fully or partially restore M-MuLV assembly when introduced into matrix, p12, or nucleocapsid domains of the mutant M-MuLV Gag protein lacking the PPPY motif. Strikingly, mutant viruses carrying the RSV or the HIV-1 L-domain at the original location of the deleted PPPY motif were replication competent in rodent cells. These data suggest that the PPPY motif of M-MuLV acts in a partially position-independent manner and is functionally interchangeable with L-domains of other retroviruses. Electron microscopy studies revealed that deletion of the entire p12 region resulted in the formation of tube-like rather than spherical particles. Remarkably, the PPPY deletion mutant formed chain structures composed of multiple viral particles linked on the cell surface. Many of the mutants with heterologous L-domains released virions with wild-type morphology.

Gag-derived proteins of HIV-1 isolates from Indian patients: cloning, expression, and purification of p24 of B- and C-subtypes

A simple and efficient method for hyperexpression in Escherichia coli and purification of capsid protein, p24, of human immunodeficiency virus type 1 (HIV-1) of both B- and C-subtypes is described. DNA-encoding p24 of C-subtype was cloned from C-subtype gag sequence which was obtained by PCR amplification using DNA extracted from peripheral blood mononuclear lymphocytes (PBMLs) of an HIV-1-infected patient from India. DNA-encoding p24B protein was amplified directly by two-step PCR using genomic DNA obtained from PBMLs of an HIV-infected individual. A T7 promoter-based expression system was optimized for hyperexpression of p24 in the soluble form. Both p24 (B- and C-subtype) were purified to near homogeneity using conventional chromatographic techniques. Purification of p24 (C subtype) was described for the first time with yield of 53 mg from 1 liter of culture. The yield of p24 (B-subtype) was 67 mg from 1 liter of culture, which was severalfold better than reported earlier. The immunoreactivity of both types of p24 to sera from HIV-infected individuals was comparable. This report describes a simple, highly efficient, and reproducible method for obtaining large quantities of highly pure p24 of both B- and C-subtype, which can be used for structural, biochemical, and immunological characterization and, eventually, for diagnostic and prognostic applications.

Assembly of retrovirus capsid-nucleocapsid proteins in the presence of membranes or RNA

Retrovirus Gag precursor (PrGag) proteins direct the assembly of roughly spherical immature virus particles, while after proteolytic processing events, the Gag capsid (CA) and nucleocapsid (NC) domains condense on viral RNAs to form mature retrovirus core structures. To investigate the process of retroviral morphogenesis, we examined the properties of histidine-tagged (His-tagged) Moloney murine leukemia (M-MuLV) capsid plus nucleocapsid (CANC) (His-MoCANC) proteins in vitro. The His-MoCANC proteins bound RNA, possessed nucleic acid-annealing activities, and assembled into strand, circle (or sphere), and tube forms in the presence of RNA. Image analysis of electron micrographs revealed that tubes were formed by cage-like lattices of CANC proteins surrounding at least two different types of protein-free cage holes. By virtue of a His tag association with nickel-chelating lipids, His-MoCANC proteins also assembled into planar sheets on lipid monolayers, mimicking the membrane-associated immature PrGag protein forms. Membrane-bound His-MoCANC proteins organized into two-dimensional (2D) cage-like lattices that were closely related to the tube forms, and in the presence of both nickel-chelating lipids and RNAs, 2D lattice forms appeared similar to lattices assembled in the absence of RNA. Our observations are consistent with a M-MuLV morphogenesis model in which proteolytic processing of membrane-bound Gag proteins permits CA and NC domains to rearrange from an immature spherical structure to a condensed mature form while maintaining local protein-protein contacts.

Structure and self-association of the Rous sarcoma virus capsid protein

BACKGROUND

The capsid protein (CA) of retroviruses, such as Rous sarcoma virus (RSV), consists of two independently folded domains. CA functions as part of a polyprotein during particle assembly and budding and, in addition, forms a shell encapsidating the genomic RNA in the mature, infectious virus.

RESULTS

The structures of the N- and C-terminal domains of RSV CA have been determined by X-ray crystallography and solution nuclear magnetic resonance (NMR) spectroscopy, respectively. The N-terminal domain comprises seven alpha helices and a short beta hairpin at the N terminus. The N-terminal domain associates through a small, tightly packed, twofold symmetric interface within the crystal, different from those previously described for other retroviral CAs. The C-terminal domain is a compact bundle of four alpha helices, although the last few residues are disordered. In dilute solution, RSV CA is predominantly monomeric. We show, however, using electron microscopy, that intact RSV CA can assemble in vitro to form both tubular structures constructed from toroidal oligomers and planar monolayers. Both modes of assembly occur under similar solution conditions, and both sheets and tubes exhibit long-range order.

CONCLUSIONS

The tertiary structure of CA is conserved across the major retroviral genera, yet sequence variations are sufficient to cause change in associative behavior. CA forms the exterior shell of the viral core in all mature retroviruses. However, the core morphology differs between viruses. Consistent with this observation, we find that the capsid proteins of RSV and human immunodeficiency virus type 1 exhibit different associative behavior in dilute solution and assemble in vitro into different structures.

Relationship between human immunodeficiency virus type 1 Gag multimerization and membrane binding

The human immunodeficiency virus type 1 (HIV-1) Gag precursor, Pr55(Gag), is necessary and sufficient for the assembly and release of viruslike particles. Binding of Gag to membrane and Gag multimerization are both essential steps in virus assembly, yet the domains responsible for these events have not been fully defined. In addition, the relationship between membrane binding and Gag-Gag interaction remains to be elucidated. To investigate these issues, we analyzed, in vivo, the membrane-binding and assembly properties of a series of C-terminally truncated Gag mutants. Pr55(Gag) was truncated at the C terminus of matrix (MAstop), between the N- and C-terminal domains of capsid (CA146stop), at the C terminus of capsid (p41stop), at the C terminus of p2 (p43stop), and after the N-terminal 35 amino acids of nucleocapsid (NC35stop). The ability of these truncated Gag molecules to assemble and release viruslike particles and their capacity to copackage into particles when coexpressed with full-length Gag were determined. We demonstrate that the amount of truncated Gag incorporated into particles is incrementally increased by extension from CA146 to NC35, suggesting that multiple sites in this region are involved in Gag multimerization. Using membrane flotation centrifugation, we observe that MA shows significantly reduced membrane binding relative to full-length Gag but that CA146 displays steady-state membrane-binding properties comparable to those of Pr55(Gag). The finding that the CA146 mutant, which contains only matrix and the N-terminal domain of capsid, exhibits levels of steady-state membrane binding equivalent to those of full-length Gag indicates that strong Gag-Gag interaction domains are not required for the efficient binding of HIV-1 Gag to membrane.

Solution structure and dynamics of the Rous sarcoma virus capsid protein and comparison with capsid proteins of other retroviruses

The solution structure and dynamics of the recombinant 240 amino acid residue capsid protein from the Rous sarcoma virus has been determined by NMR methods. The structure was determined using 2200 distance restraints and 330 torsion angle restraints, and the dynamics analysis was based on (15)N relaxation parameters (R(1), R(2), and (1)H-(15)N NOE) measured for 153 backbone amide groups. The monomeric protein consists of independently folded N- and C-terminal domains that comprise residues Leu14-Leu146 and Ala150-Gln226, respectively. The domains exhibit different rotational correlation times (16.6(+/-0.1) ns and 12.6(+/-0.1) ns, respectively), are connected by a flexible linker (Ala147-Pro149), and do not give rise to inter-domain NOE values, indicating that they are dynamically independent. Despite limited sequence similarity, the structure of the Rous sarcoma virus capsid protein is similar to the structures determined recently for the capsid proteins of retroviruses belonging to the lentivirus and human T-cell leukemia virus/bovine leukemia virus genera. Structural differences that exist in the C-terminal domain of Rous sarcoma virus capsid relative to the other capsid proteins appear to be related to the occurrence of conserved cysteine residues. Whereas most genera of retroviruses contain a pair of conserved and essential cysteine residues in the C-terminal domain that appear to function by forming an intramolecular disulfide bond during assembly, the Rous sarcoma virus capsid protein does not. Instead, the Rous sarcoma virus capsid protein contains a single cysteine residue that appears to be conserved among the avian C-type retroviruses and is positioned in a manner that might allow the formation of an intermolecular disulfide bond during capsid assembly.

Human immunodeficiency virus type 1 Gag polyprotein multimerization requires the nucleocapsid domain and RNA and is promoted by the capsid-dimer interface and the basic region of matrix protein

The human immunodeficiency virus type 1 (HIV-1) Gag polyprotein directs the formation of virions from productively infected cells. Many gag mutations disrupt virion assembly, but little is known about the biochemical effects of many of these mutations. Protein-protein interactions among Gag monomers are believed to be necessary for virion assembly, and data suggest that RNA may modify protein-protein interactions or even serve as a bridge linking Gag polyprotein monomers. To evaluate the primary sequence requirements for HIV-1 Gag homomeric interactions, a panel of HIV-1 Gag deletion mutants was expressed in bacteria and evaluated for the ability to associate with full-length Gag in vitro. The nucleocapsid protein, the major RNA-binding domain of Gag, exhibited activity comparable to that of the complete polyprotein. In the absence of the nucleocapsid protein, relatively weak activity was observed that was dependent upon both the capsid-dimer interface and basic residues within the matrix domain. The relevance of the in vitro findings was confirmed with an assay in which nonmyristylated mutant Gags were assessed for the ability to be incorporated into virions produced by wild-type Gag expressed in trans. Evidence of the importance of RNA for Gag-Gag interaction was provided by the demonstration that RNase impairs the Gag-Gag interaction and that HIV-1 Gag interacts efficiently with Gags encoded by distantly related retroviruses and with structurally unrelated RNA-binding proteins. These results are consistent with models in which Gag multimerization involves indirect contacts via an RNA bridge as well as direct protein-protein interactions.

Backbone dynamics of the N-terminal domain of the HIV-1 capsid protein and comparison with the G94D mutant conferring cyclosporin resistance/dependence

Nuclear magnetic resonance (NMR) (15)N relaxation methods have been used to characterize the backbone dynamics of the N-terminal core domain of the HIV-1 capsid protein (CA(151)). The domain, which has an unusually flat, triangular shape, tumbles in solution at 28 degrees C with an effective rotational correlation time of 11.5 ns. Relaxation data for backbone amides in the domain's seven alpha-helices are indicative of fully anisotropic rotational diffusion. The principal axes of the rotational diffusion tensor calculated from the NMR data are aligned to within 12-23 degrees of the principal axes of the inertial tensor, with the axis of fastest rotational diffusion coincident with that of minimal inertia, and vice versa. Large variations in the (15)N-(1)H nuclear Overhauser effects for individual amino acids correlate with the degree of convergence in the previously calculated NMR structure. In particular, the partially disordered residues Val86-Arg97 that contain the human cyclophilin A (CypA) packaging signal have (15)N heteronuclear NOEs and transversal relaxation rates consistent with a high degree of dynamic conformational averaging. The N-terminal domain of a CA mutant (G94D) that confers both resistance to and dependence on cyclosporin A analogues was also analyzed. Our results indicate that this mutation does not influence the conformation or dynamics of CA(151), and therefore probably affects the function of the protein by modifying essential intermolecular CA-CA interactions.

In vitro assembly properties of human immunodeficiency virus type 1 Gag protein lacking the p6 domain

Human immunodeficiency virus type 1 (HIV-1) normally assembles into particles of 100 to 120 nm in diameter by budding through the plasma membrane of the cell. The Gag polyprotein is the only viral protein that is required for the formation of these particles. We have used an in vitro assembly system to examine the assembly properties of purified, recombinant HIV-1 Gag protein and of Gag missing the C-terminal p6 domain (Gag Deltap6). This system was used previously to show that the CA-NC fragment of HIV-1 Gag assembled into cylindrical particles. We now report that both HIV-1 Gag and Gag Deltap6 assemble into small, 25- to 30-nm-diameter spherical particles in vitro. The multimerization of Gag Deltap6 into units larger than dimers and the formation of spherical particles required nucleic acid. Removal of the nucleic acid with NaCl or nucleases resulted in the disruption of the multimerized complexes. We conclude from these results that (i) N-terminal extension of HIV-1 CA-NC to include the MA domain results in the formation of spherical, rather than cylindrical, particles; (ii) nucleic acid is required for the assembly and maintenance of HIV-1 Gag Deltap6 virus-like particles in vitro and possibly in vivo; (iii) a wide variety of RNAs or even short DNA oligonucleotides will support assembly; (iv) protein-protein interactions within the particle must be relatively weak; and (v) recombinant HIV-1 Gag Deltap6 and nucleic acid are not sufficient for the formation of normal-sized particles.

Maturation-induced conformational changes of HIV-1 capsid protein and identification of two high affinity sites for cyclophilins in the C-terminal domain

Viral incorporation of cyclophilin A (CyPA) during the assembly of human immunodeficiency virus type-1 (HIV-1) is crucial for efficient viral replication. CyPA binds to the previously identified Gly-Pro90 site of the capsid protein p24, but its role remained unclear. Here we report two new interaction sites between cyclophilins and p24. Both are located in the C-terminal domain of p24 around Gly-Pro157 and Gly-Pro224. Peptides corresponding to these regions showed higher affinities (Kd approximately 0.3 microM) for both CyPA and cyclophilin B than the best peptide derived from the Gly-Pro90 site ( approximately 8 microM) and thus revealed new sequence motifs flanking Gly-Pro that are important for tight interaction of peptide ligands with cyclophilins. Between CyPA and an immature (unprocessed) form of p24, a Kd of approximately 8 microM was measured, which corresponded with the Kd of the best of the Gly-Pro90 peptides, indicating an association via this site. Processing of immature p24 by the viral protease, yielding mature p24, elicited a conformational change in its C-terminal domain that was signaled by the covalently attached fluorescence label acrylodan. Consequently, CyPA and cyclophilin B bound with much higher affinities ( approximately 0.6 and 0.25 microM) to the new, i.e. maturation-generated sites. Since this domain is essential for p24 oligomerization and capsid cone formation, CyPA bound to the new sites might impair the regularity of the capsid cone and thus facilitate in vivo core disassembly after host infection.