Metal-on-metal bearings: the evidence so far

Revision of Failed Hip Resurfacing and Large Metal-on-Metal Total Hip Arthroplasty Using Dual-Mobility Components

Revision of metal-on-metal (MoM) total hip arthroplasty (THA) or hip resurfacing is associated with high complication rates. The authors propose dual-mobility components as a surgical option and present short- to mid-term results of MoM hips revised with dual-mobility components. Eighteen consecutive hips that underwent revision of MoM THA or hip resurfacing using dual-mobility components were identified. At final follow-up (mean, 17.5 months), the visual analog scale, modified Harris Hip Score, and SF-12 scores had all improved (P<.05, P<.01, and P<.05, respectively). There were no dislocations or other complications. Revision of failed MoM THA or hip resurfacing using a dual-mobility device is an effective strategy.

[Histopathological particle algorithm. Particle identification in the synovia and the SLIM]

BACKGROUND

In the histopathological diagnostics of synovitis and the synovium-like interface membrane (SLIM) the identification of crystals and crystal-like deposits and the associated inflammatory reactions play an important role. The multitude of endogenous crystals, the range of implant materials and material combinations, and the variability in the formation process of different particles explain the high morphological particle heterogeneity which complicates the diagnostic identification of diagnostic particles.

STUDY DESIGN AND METHODS

A simple histopathological particle algorithm has been designed which allows methodological particle identification based on (1) conventional transmitted light microscopy with a guide to particle size, shape and color, (2) optical polarization criteria and (3) enzyme histochemical properties (oil red staining and Prussian blue reaction). These methods, the importance for particle identification and the differential diagnostics from non-prosthetic materials are summarized in the so-called histopathological particle algorithm.

RESULTS

A total of 35 cases of synovitis and SLIM were analyzed and validated according to these criteria. Based on these criteria and a dichotomous differentiation the complete spectrum of particles in the SLIM and synovia can be defined histopathologically.

CONCLUSION

For histopathological diagnosis a particle score for synovitis and SLIM is recommended to evaluate (1) the predominant type of prothetic wear debris with differentiation between microparticles, and macroparticles, (2) the presence of non-prosthesis material particles and (3) the quantification of particle-association necrosis and lymphocytosis. An open, continuously updated web-based particle algorithm would be helpful to address the issue of particle heterogeneity and include all new particle materials generated in a rapidly changing field.

A two-year radiostereometric follow-up of the first generation Birmingham mid head resection arthroplasty

During the first decade of the 21st century, metal-on-metal hip resurfacing became one of the main treatment options for younger, more active patients with osteoarthritis. However, as a result of the reported failure rate of both total hip replacement (THR) and resurfacing in patients with considerable loss of bone stock in the femoral head (e.g., in extensive avascular necrosis), other solutions have been sought for these patients. The short-stemmed Birmingham Mid Head Resection prosthesis (BMHR) combines a metal-on-metal articulation and a femoral neck preserving feature. In this study, radiostereometric analysis (RSA) was used to study migration of the BMHR femoral component in 13 hips. Translations and rotations were measured up to two years. Relative values showed no statistically significant migration. Absolute values demonstrated settling in occurring between zero and two months postoperatively in all directions studied. From two months to two years no significant migration occurred except for rotation around the x-axis of the femoral segment (p = 0.049). After initial settling-in, absolute values were low, indicating that there was no evidence of early migration or loosening of the components.

Revision of metal-on-metal hip replacements and resurfacings for adverse reaction to metal debris: a systematic review of outcomes

PURPOSE

This systematic review assessed evidence on outcomes following revision of MoM hip resurfacings (HRs) and total hip replacements (THRs) for adverse reaction to metal debris (ARMD).

METHODS

Four electronic databases were searched between January 2009 and July 2013 to identify studies reporting clinical outcomes following revision of MoM HRs and THRs for ARMD. Only studies reporting cohorts with more than 10 metal-on-metal (MoM) hips revised for ARMD were included. Outcomes of interest following ARMD revision were: (1) complication rates; (2) re-revision rates; (3) surgical intervention other than re-revision; (4) functional outcome.

RESULTS

Of 148 unique studies identified, six studies were eligible for inclusion containing 216 MoM hips (197 HRs and 19 THRs) revised for ARMD. Mean follow-up time from ARMD revision ranged between 21-61 months. Complication rates were 4%-50% for HR and 68% for THR. Re-revision rates were 3%-38% for HR and 21% for THR. Dislocation (n = 14), ARMD recurrence (n = 11), and acetabular loosening (n = 9) were the three commonest complications and indications for re-revision. All six studies reported between one and three cases of ARMD recurrence during follow-up. One study specifically reported on performing procedures other than re-revision with 26% requiring closed reductions for dislocated THRs. Functional outcomes following ARMD revision were good or satisfactory in all but two studies.

CONCLUSIONS

Limited evidence exists regarding outcomes following revision of MoM hips for ARMD, especially for THRs. This should be addressed in future studies and may be important when counselling asymptomatic individuals in whom revision is considered for raised blood metal ions.

Greater Trochanteric Fragmentation After Failed Metal-on-Metal Hip Arthroplasty

Adverse reaction to metal debris (ARMD) involving the hip joint has emerged as an important reason for failure and revision among patients with metal-on-metal (MOM) hip arthroplasty. To the authors' knowledge, there are no reports of adverse radiographic sequelae in the greater trochanter subsequent to revision for ARMD. The authors describe clinical and radiographic findings in 2 patients who developed greater trochanteric fragmentation 1 to 2 years after conversion of their failed MOM hips to polyethylene bearings. Both patients had solid pseudotumors with tissue necrosis. Several reports describe various clinical features of ARMD. Although poor outcomes have been demonstrated after some MOM revisions, to the authors' knowledge, no reports document greater trochanter fragmentation in ARMD. The current patients highlight the fact that tissue damage occurring with MOM bearing hips can involve bone in addition to soft tissue even after a pseudotumor has been removed and serum metal levels have decreased to normal levels after revision. Unlike the greater trochanteric fractures historically associated with polyethylene wear and osteolysis, no evidence of bone cysts or lesions was found prior to the fractures and neither fracture healed with conservative treatment. For these 2 patients, the authors believe the tissue necrosis included both soft tissue and bone. The necrotic bone resorbed gradually after removal of the MOM bearing, resulting in bone fragmentation with ongoing symptoms. These patients emphasize and remind us that damage is not only limited to soft tissues, but also includes bone. Surgeons should be aware of this radiographic finding and the associated clinical symptoms.

Usefulness of ultrasonography for detection of pseudotumors after metal-on-metal total hip arthroplasty

We retrospectively analyzed 83 metal-on-metal total hip arthroplasties in 74 patients. Ultrasonography and magnetic resonance imaging (MRI) of each hip were performed to detect abnormal patterns and pseudotumors. We examined the reliability of ultrasonography for detecting pseudotumors in comparison with MRI. We also compared the acetabular component inclination between patients with and without pseudotumors. The mean positive and negative predictive values for pseudotumor detection by ultrasonography were 65% and 91%, respectively. The mean positive and negative likelihood ratios were 5.78 and 0.32, respectively. There was no clear association between pseudotumor presence and acetabular component inclination. We concluded that ultrasonography is a suitable technique to screen for the presence of pseudotumors. We also need to distinguish between bearing-related and taper junction corrosion-related complications.

Metal-on-metal hip resurfacing: correlation between clinical and radiological assessment, metal ions and ultrasound findings

PURPOSE

We report the clinical, radiological and wear analysis of 52 consecutive MoM hip resurfacings (performed on 49 younger patients) to a mean follow-up of 9.2 years.

METHODS

Every patient underwent X-ray and clinical evaluation (HHS). Ultrasonography of the hip was performed in all patients in order to identify possible cystic or solid mass in periprosthetic tissue. In case of mass >20 mm, further MRI was performed to better analyse the characteristics of lesion.

RESULTS

Five patients (five hips) had a revision. The overall survival rate was 90.38 %. The average HHS at follow-up examination was 95.5 points. No progressive radiolucent areas and no sclerosis or osteolysis around the implants were found. The US and RMI imaging showed a pseudotumour formation in two patients (correlated with high metal ion levels in blood and urine), both asymptomatic.

CONCLUSION

A significant positive correlation between inclination of the acetabular component and serum metal ion levels was found (r = 0.64 and r = 0.62 for cobalt and chromium, respectively).

Modes of failure in metal-on-metal total hip arthroplasty

Use of large-head metal-on-metal (MoM) bearing surfaces in total hip arthroplasty (THA) has created new and unique modes of failure for this type of articulation. These unique modes are in addition to the traditional modes of failure seen in conventional THA, which include instability, osteolysis, infection, iliopsoas tendinitis, aseptic loosening, and periprosthetic fracture. Ion levels and cross-sectional imaging are helpful when evaluating a MoM patient in the identification of adverse local tissue reactions. Unique modes of failure in MoM THA include tissue necrosis, metallosis-induced osteolysis, skin hypersensitivity reactions, and rarely systemic cobaltism. This article outlines the evaluation and treatment of modes of failure in MoM THA.

Predictors of time to revision and clinical outcomes following revision of metal-on-metal hip replacements for adverse reaction to metal debris

We undertook a retrospective cohort study to determine clinical outcomes following the revision of metal-on-metal (MoM) hip replacements for adverse reaction to metal debris (ARMD), and to identify predictors of time to revision and outcomes following revision. Between 1998 and 2012 a total of 64 MoM hips (mean age at revision of 57.8 years; 46 (72%) female; 46 (72%) hip resurfacings and 18 (28%) total hip replacements) were revised for ARMD at one specialist centre. At a mean follow-up of 4.5 years (1.0 to 14.6) from revision for ARMD there were 13 hips (20.3%) with post-operative complications and eight (12.5%) requiring re-revision. The Kaplan-Meier five-year survival rate for ARMD revision was 87.9% (95% confidence interval 78.9 to 98.0; 19 hips at risk). Excluding re-revisions, the median absolute Oxford hip score (OHS) following ARMD revision using the percentage method (0% best outcome and 100% worst outcome) was 18.8% (interquartile range (IQR) 7.8% to 48.3%), which is equivalent to 39/48 (IQR 24.8/48 to 44.3/48) when using the modified OHS. Histopathological response did not affect time to revision for ARMD (p = 0.334) or the subsequent risk of re-revision (p = 0.879). Similarly, the presence or absence of a contralateral MoM hip bearing did not affect time to revision for ARMD (p = 0.066) or the subsequent risk of re-revision (p = 0.178). Patients revised to MoM bearings had higher rates of re-revision (five of 16 MoM hips re-revised; p = 0.046), but those not requiring re-revision had good functional results (median absolute OHS 14.6% or 41.0/48). Short-term morbidity following revision for ARMD was comparable with previous reports. Caution should be exercised when choosing bearing surfaces for ARMD revisions.

A prospective study of ceramic-on-metal bearings in total hip arthroplasty at four-year follow-up: clinical results, metal ion levels, inflammatory factor levels, and liver-kidney function

BACKGROUND

Despite the theoretical advantages of ceramic-on-metal (CoM) bearings observed in laboratory settings, limited clinical data are available to support in vitro results. Our present study prospectively investigated the clinical results, serum metal ion levels, inflammatory factor levels, and liver-kidney function in a cohort of patients who received total hip arthroplasty (THA) with CoM bearings.

METHODS

The cohort comprised 82 THAs in 71 patients (41 men and 30 women), with a mean age of 54 (range 22-77) years. The mean follow-up was four years. All patients completed pre- and postoperative clinical assessment using the Harris Hip Score, Short Form-12, Western Ontario and McMaster Universities Osteoarthritis Index, and radiographic analysis. The serum metal ion levels of cobalt, chromium, molybdenum, and titanium were measured using high-resolution inductively coupled plasma mass spectrometry, and were compared with normal reference values. Inflammatory factors including C-reactive protein, erythrocyte sedimentation, and interleukin-6 levels, and liver-kidney function including alanine aminotransferase, aspartate aminotransferase, total bilirubin, creatinine, and blood urea nitrogen, were measured in our hospital clinical key laboratory.

RESULTS

At the end of the follow-up period, all clinical assessments showed a statistically significant improvement. Although the inflammatory factor levels and liver-kidney function were within normal ranges, the serum levels of metal ion were significantly elevated compared with normal values: cobalt, 2.8 μg/L; chromium, 2.2 μg/L; molybdenum, 0.9 μg/L; and titanium, 2.1 μg/L. Spearman's correlation analysis showed an association between cobalt, chromium, and titanium metal ion levels and BMI values.

CONCLUSIONS

Our study demonstrated that the use of a CoM THA was clinically effective and that metal ion levels were significantly elevated at midterm follow-up. Whether the elevated metal ion levels may reduce adverse reactions is unknown, and long-term follow-up is needed.

Dual mobility bearings withstand loading from steeper cup-inclinations without substantial wear

Steep cup abduction angles with adverse joint loading may increase traditional polyethylene bearing wear in total hip arthroplasties. However, there have been few reports evaluating the effect of cup inclination on the wear of dual-mobility devices. In a hip joint simulation, we compared the short-term wear of two-sizes of modular highly cross-linked dual-mobility bearings (28 mm femoral head diameter/42 mm polyethylene insert outer diameter/54 mm acetabular shell diameter; 22.2 mm femoral head diameter/36 mm polyethylene insert outer diameter/48 mm acetabular shell diameter) at 50 and 65° of cup inclination with modular 28 mm femoral head on 54 mm cup diameter metal-on-highly cross-linked polyethylene bearings. Increasing inclination from 50-65° had no changes in volumetric wear of 28/42/54 mm (mean, 1.7 vs. 1.2 mm3 /million cycles, respectively; p = 0.50) and 22.2/36/48 mm (mean, 1.7 vs. 1.2 mm3/million cycles, respectively; p = 0.48) dual mobility bearings. At 65°, 22.2/36/48 mm dual-mobility bearings had lower volumetric loss (mean, 2.2 vs. 6.3 mm(3) ; p = 0.03) and wear rates (mean, 1.2 vs. 2.7 mm3/million cycles; p = 0.02) compared to metal-on-highly cross-linked polyethylene bearings. Modern-generation dual-mobility designs with highly cross-linked polyethylenes may potentially withstand edge-loading from steeper cup-inclinations without substantial decreases in wear.

Pseudotumor formation and serum ions after large head metal-on-metal stemmed total hip replacement. Risk factors, time course and revisions in 706 hips

INTRODUCTION

The incidence and natural course of pseudotumors in metal-on-metal total hip arthroplasties is largely unknown. The objective of this study was to identify the true incidence and risk factors of pseudotumor formation in large head metal-on-metal total hip arthroplasties.

MATERIALS AND METHODS

Incidence, time course and risk factors for pseudotumor formation were analysed after large femoral head MoM-THA. We defined a pseudotumor as a (semi-)solid or cystic peri-prosthetic soft-tissue mass with a diameter ≥2 cm that could not be attributed to infection, malignancy, bursa or scar tissue. All patients treated in our clinic with MoM-THA's were contacted. CT scan, metal ions and X-rays were obtained. Symptoms were recorded.

RESULTS

After median follow-up of 3 years, 706 hips were screened in 626 patients. There were 228 pseudotumors (32.3 %) in 219 patients (35.0 %). Pseudotumor formation significantly increased after prolonged follow-up. Seventy-six hips (10.8 %) were revised in 73 patients (11.7 %), independent risk factors were identified. Best cutoff point for cobalt and chromium was 4 μg/l (68 and 77 nmol/l).

CONCLUSIONS

This study confirms a high incidence of pseudotumors, dramatically increasing after prolonged follow-up. Risk factors for pseudotumors are of limited importance. Pain was the strongest predictor for pseudotumor presence; cobalt chromium and swelling were considered poor predictors. Cross-sectional imaging is the main screening tool during follow-up.

Early surveillance of ceramic-on-metal total hip arthroplasty

Ceramic-on-metal (CoM) is a relatively new bearing combination for total hip arthroplasty (THA) with few reported outcomes. A total of 287 CoM THAs were carried out in 271 patients (mean age 55.6 years (20 to 77), 150 THAs in female patients, 137 in male) under the care of a single surgeon between October 2007 and October 2009. With the issues surrounding metal-on-metal bearings the decision was taken to review these patients between March and November 2011, at a mean follow-up of 34 months (23 to 45) and to record pain, outcome scores, radiological analysis and blood ion levels. The mean Oxford Hip Score was 19.2 (12 to 53), 254 patients with 268 hips (95%) had mild/very mild/no pain, the mean angle of inclination of the acetabular component was 44.8o (28o to 63o), 82 stems (29%) had evidence of radiolucent lines of > 1 mm in at least one Gruen zone and the median levels of cobalt and chromium ions in the blood were 0.83 μg/L (0.24 μg/L to 27.56 μg/L) and 0.78 μg/L (0.21 μg/L to 8.84 μg/L), respectively. The five-year survival rate is 96.9% (95% confidence interval 94.7% to 99%).

Due to the presence of radiolucent lines and the higher than expected levels of metal ions in the blood, we would not recommend the use of CoM THA without further long-term follow-up. We plan to monitor all these patients regularly.

Cite this article: Bone Joint J 2015;97-B:300–5.

Adverse reactions to metal debris in metal-on-polyethylene total hip arthroplasty using a titanium-molybdenum-zirconium-iron alloy stem

We report a series of three patients who underwent uncemented total hip arthroplasty with a modular titanium-molybdenum-zirconium-iron stem and a cobalt-chrome-molybdenum head on an ultra-high molecular weight highly cross-linked polyethylene liner bearing. All three cases subsequently developed pain and adverse reaction to metal debris, leading to revision of the implants within thirty-six months. They were subsequently found to have hypersensitivity to cobalt or chromium. However where tested, blood metal ion levels were within MHRA guideline limits. Corrosion was noted at the taper-trunnion junction. It is possible, that the multi alloy head-neck combination may lead to corrosion. Hypersensitivity to metal ions may result to ARMD at lower metal ion levels. The use of ceramic heads may help avoid this risk.

Have cementless and resurfacing components improved the medium-term results of hip replacement for patients under 60 years of age?

BACKGROUND AND PURPOSE

The optimal hip replacement for young patients remains unknown. We compared patient-reported outcome measures (PROMs), revision risk, and implant costs over a range of hip replacements.

METHODS

We included hip replacements for osteoarthritis in patients under 60 years of age performed between 2003 and 2010 using the commonest brand of cemented, cementless, hybrid, or resurfacing prosthesis (11,622 women and 13,087 men). The reference implant comprised a cemented stem with a conventional polyethylene cemented cup and a standard-sized head (28- or 32-mm). Differences in implant survival were assessed using competing-risks models, adjusted for known prognostic influences. Analysis of covariance was used to assess improvement in PROMs (Oxford hip score (OHS) and EQ5D index) in 2014 linked procedures.

RESULTS

In males, PROMs and implant survival were similar across all types of implants. In females, revision was statistically significantly higher in hard-bearing and/or small-stem cementless implants (hazard ratio (HR) = 4) and resurfacings (small head sizes (< 48 mm): HR = 6; large head sizes (≥ 48 mm): HR = 5) when compared to the reference cemented implant. In component combinations with equivalent survival, women reported significantly greater improvements in OHS with hybrid implants (22, p = 0.006) and cementless implants (21, p = 0.03) (reference, 18), but similar EQ5D index. For men and women, National Health Service (NHS) costs were lowest with the reference implant and highest with a hard-bearing cementless replacement.

INTERPRETATION

In young women, hybrids offer a balance of good early functional improvement and low revision risk. Fully cementless and resurfacing components are more costly and do not provide any additional benefit for younger patients.

Revisions of monoblock metal-on-metal THAs have high early complication rates

BACKGROUND

A relatively high percentage of monoblock metal-on-metal total hip arthroplasties (THAs) undergo early revision. Revision of these THAs poses challenges unique to this implant type. The early complications after these revisions remain unreported as do the clinical and demographic factors associated with these complications.

QUESTIONS/PURPOSES

We describe (1) the frequency of early complications after revision of monoblock metal-on-metal THA; and (2) the clinical and demographic factors associated with complications.

METHODS

A review of our institution's total joint registry identified 107 patients who underwent 114 revisions of monoblock metal-on-metal THAs. Mean patient age at revision was 60 years (range, 17-84 years), and 65% of the patients were women. Mean followup after revision was 14 months (range, 0-122 months). Revision diagnoses included metallosis (51%), aseptic loosening (27%), infection (7%), pain (6%), malposition (4%), instability (3%), iliopsoas impingement (2%), and periprosthetic fracture (1%). Major complications (instability, infection, aseptic loosening, and wound complications) were documented and included in the analysis. Minor postoperative complications such as urinary tract infection were excluded.

RESULTS

Twenty-three of 114 procedures (20%) involved at least one early complication after revision of monoblock metal-on-metal THA with 18 (16%) undergoing at least one additional subsequent surgery. The most common complications included aseptic loosening (6%), deep infection (6%), dislocation (4%), and acetabular fracture (3%). Patients who sustained a complication after revision surgery were older on average than those who did not (66 years versus 58 years, p=0.003). There were no differences in complication rate with respect to sex, time to revision, or revision diagnosis.

CONCLUSIONS

Complications and reoperations occur frequently after revision for failed monoblock metal-on-metal THA (20% and 16%, respectively), and older patients appear to be at greater risk for complications after these revisions. Aseptic loosening, deep infection, and instability are all of great concern after revision and surgeons should be aware of these potential complications when undertaking revision of these THAs.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See Instructions for Authors for a complete description of levels of evidence.

A multidisciplinary enhanced recovery programme allows discharge within two days of total hip replacement; three- to five-year results of 100 patients

We present three- to five- year results of 100 sequential patients undergoing total hip replacement (THR) through a multidisciplinary rapid recovery programme, with mean length of stay (LOS) 1.99 nights. Patients attend pre-admission 'bone school', with talks and assessments by the senior sister, physiotherapist and occupational therapist. All receive an uncemented Corail-Pinnacle THR via piriformis-sparing mini-posterior approach. 'Low dose' spinal plus light general anaesthesia provides sensory block whilst retaining motor function; painfree mobilisation is predictably achieved within four hours. Following radiograph and haemoglobin check next morning, patients are discharged on meeting specific nursing/physiotherapy criteria. Those within 20 miles receive outreach follow-up. Follow-up assessment is undertaken using SF36, Visual Analogue, Merle d'Aubigné-Postel and Oxford Hip Scores. Mean age was 65 years (25-91), mean BMI 28.7 (19-43). ASA ranged 1-3 (mode 2), Charlson comorbidity index from 0-9 (mode 3). Major complications were: one dislocation with deep infection; one myocardial infarction; one trochanteric bursitis requiring exploration; one ceramic fracture; and three metal debris reactions. Several more minor complications occurred. LOS was longer in older patients (p = 0.03) and those with higher Charlson index (p = 0.02).Eighty-two patients remain under follow-up, (mean 37.8 months, range 36-61). Six have died; five underwent revision; seven have moved away or been lost. Ninety-seven percent remain quite or very satisfied. Our LOS is amongst the shortest in the United Kingdom, with encouraging outcomes. The SSP succeeds by involving all team-members, and managing patient expectation. At a time of limited healthcare resources we propose that our SSP could readily be reproduced elsewhere with similar benefits.

What are the advantages and disadvantages of imaging modalities to diagnose wear-related corrosion problems?

BACKGROUND

Adverse tissue reactions are known to occur after total hip arthroplasty using both conventional and metal-on-metal (MoM) bearings and after MoM hip resurfacing arthroplasty (SRA). A variety of imaging tools, including ultrasound (US), CT, and MRI, have been used to diagnose problems associated with wear after MoM hip arthroplasty and corrosion at the head-trunnion junction; however, the relative advantages and disadvantages of each remain a source of controversy.

QUESTIONS/PURPOSES

The purposes of this review were to evaluate the advantages and disadvantages of (1) US; (2) CT; and (3) MRI as diagnostic tools in the assessment of wear-related corrosion problems after hip arthroplasty.

METHODS

A systematic literature review was performed through Medline, EMBASE, Scopus CINAHL, and the Cochrane Library without time restriction using search terms related to THA, SRA, US, CT, MRI, adverse tissue reactions, and corrosion. Inclusion criteria were Level I through IV studies in the English language, whereas expert opinions and case reports were excluded. The quality of included studies was judged by their level of evidence, method of intervention allocation, outcome assessments, and followup of patients. Four hundred ninety unique results were returned and 40 articles were reviewed.

RESULTS

The prevalence of adverse local tissue reactions in both asymptomatic and symptomatic patients varies based on the method of evaluation (US, CT, MRI) and imaging protocols. US is accessible and relatively inexpensive, yet has not been used to report synovial thicknesses in the setting of wear-related corrosion. CT scans are highly sensitive and provide information regarding component positioning but are limited in providing enhanced soft tissue contrast and require ionizing radiation. MRI has shown promise in predicting both the presence and severity of adverse local tissue reactions but is more expensive.

CONCLUSIONS

All three imaging modalities have a role in the assessment of adverse local tissue reactions and tribocorrosion after total hip arthroplasty. Although US may serve as a screening technique for the detection of larger periprosthetic collections, only MRI has been shown to predict the severity of tissue destruction found at revision and correlate to the degree of tissue necrosis at histologic evaluation.

Outcomes of a metal-on-metal total hip replacement system

INTRODUCTION

High short-term failure rates have been reported for a variety of metal-on-metal (MoM) total hip replacements (THRs) owing to adverse reactions to metal debris (ARMD). This has led to the withdrawal of certain poorly performing THRs. This study analysed the outcomes of a MoM THR system.

METHODS

Between 2004 and 2010, 578 uncemented MoM THRs (511 patients, mean age: 60.0 years) were implanted at one specialist centre. The THR system used consisted of the Corail(®) stem, Pinnacle(®) cup, Ultamet(®) liner and Articul/eze(®) femoral head (all DePuy, Leeds, UK). All patients were recalled for clinical review with imaging performed as necessary.

RESULTS

The mean follow-up duration was 5.0 years (range: 1.0-9.1 years). Overall, 39 hips (6.7%) in 38 patients (all 36 mm femoral head size) underwent revision at a mean time of 3.5 years (range: 0.01-8.3 years) from the index THR with 30 revisions (77%) performed in women. The cumulative eight-year survival rate for all THRs was 88.9% (95% confidence interval [CI]: 78.5-93.4%), with no difference (p=0.053) between male (95.2%, 95% CI: 84.2-98.7%) and female patients (85.3%, 95% CI: 70.2-92.1%) at eight years. Seventeen revisions (44%) were performed for ARMD. There was no significant difference in absolute postoperative Oxford hip scores between men and women (p=0.608). The mean acetabular inclination in unrevised THRs was 44.0°. Forty-seven non-revised THRs (8.7%) had blood metal ion concentrations above recommended thresholds (seven had periprosthetic effusions).

CONCLUSIONS

Although this MoM THR system has not failed as dramatically as other similar designs, we recommend against continued use and advise regular clinical surveillance to identify ARMD early.

Metallic debris from metal-on-metal total hip arthroplasty regulates periprosthetic tissues

The era of metal-on-metal (MoM) total hip arthroplasty has left the orthopaedic community with valuable insights and lessons on periprosthetic tissue reactions to metallic debris. Various terms have been used to describe the tissue reactions. Sometimes the nomenclature can be confusing. We present a review of the concepts introduced by Willert and Semlitsch in 1977, along with further developments made in the understanding of periprosthetic tissue reactions to metallic debris. We propose that periprosthetic tissue reactions be thought of as (1) gross (metallosis, necrosis, cyst formation and pseudotumour); (2) histological (macrophage-dominated, lymphocyte-dominated or mixed); and (3) molecular (expression of inflammatory mediators and cytokines such as interleukin-6 and tumor necrosis factor-alpha). Taper corrosion and modularity are discussed, along with future research directions to elucidate the antigen-presenting pathways and material-specific biomarkers which may allow early detection and intervention in a patient with adverse periprosthetic tissue reactions to metal wear debris.

Effect of microseparation on contact mechanics in metal-on-metal hip replacements-A finite element analysis

Some early failures of metal‐on‐metal (MoM) hip replacements associated with elevated wear have caused concerns for the use of this bearing combination. Simulator studies have shown that microseparation and its associated rim contact and edge loading may produce the most severe wear in MoM bearings. It is generally recognized that this high wear can be attributed to the high contact stress of the head on the rim of the cup. In this study, an improved finite element contact model that incorporates an elastic‐perfectly plastic material property for cobalt‐chrome alloy of the metal bearing was developed in an attempt to provide an accurate prediction of the stress and strain for the rim contact. The effects of the microseparation displacement (0.1−2 mm), cup inclination angle (25−65°) and cup rim radius (0.5−4 mm) on the contact stress/strain were investigated. The results show that a translational displacement >0.1 mm under a load >0.5 kN can produce a highly concentrated contact stress at the surface of the cup rim which can lead to plastic deformation. This study also suggests that the magnitude of translational displacement was the major factor that determined the severity of the contact conditions and level of stress and strain under microseparation conditions. Future studies will address the effect of surgical translational and rotational malposition and component design on the magnitude of microseparation, contact stress and strain and severity of wear. © 2014 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 103B: 1312–1319, 2015.

Implication of femoral stem on performance of articular surface replacement (ASR) XL total hip arthroplasty

Taper junctions of large diameter metal-on-metal femoral heads and femoral stems were described as metal ion generator due to accelerated wear and corrosion. However, literature about the Articular Surface Replacement (ASR) total hip arthroplasty (THA) invariably deals with stems manufactured by DePuy Orthopedics (Warsaw, IN, USA). Nothing is known whether different stems with common 12/14 mm tapers affect failure rate or ion release. 99 ASR THA (88 patients) implanted with CoxaFit or ARGE Geradschaft stems (K-Implant, Hannover, Germany) were retrospectively analyzed. After a mean follow-up of 3.5 years revision rate was 24.5%, mostly due to adverse reaction to metal debris (ARMD). CT scan revealed component loosening in 10.3% and pseudotumoral lesions in 12.6%. Elevated ion concentrations (>7 μg/l) were found in 38.6%.

Metal-on-metal hip surface replacement

Metal-on-metal resurfacing of the hip (MoMHR) has enjoyed a resurgence in the last decade, but is now again in question as a routine option for osteoarthritis of the hip. Proponents of hip resurfacing suggest that its survival is superior to that of conventional hip replacement (THR), and that hip resurfacing is less invasive, is easier to revise than THR, and provides superior functional outcomes. Our argument serves to illustrate that none of these proposed advantages have been realised and new and unanticipated serious complications, such as pseudotumors, have been associated with the procedure. As such, we feel that the routine use of MoMHR is not justified.

Cite this article: Bone Joint J 2014;96-B(11 Suppl A):17–21.

Two-year serum metal ion levels in minimally invasive total conservative hip resurfacing: preliminary results of a prospective study

BACKGROUND

Metal-on-metal (MoM) hip resurfacings have been associated with the potential development of metallic debris and its associated pathology. Serum cobalt and chromium levels are a reliable surrogate marker of wear rates in MoM bearings. The aim of the study was to examine the trend in serum metal ion levels in the initial 2-year post-operative period following implantation of the minimally invasive total conservative hip MoM hip resurfacing and to determine whether head size, acetabular component orientation, clinical outcome scores or post-operative range of movement would affect these levels.

METHODS

In this prospective cohort study, serum cobalt and chromium ion levels were measured pre- and post-operatively in 25 patients who underwent minimally invasive total conservative hip MoM hip resurfacing. The results were correlated with acetabular component orientation, head size, outcome scores and post-operative range of movement.

RESULTS

The mean serum cobalt and chromium levels at 2 years were 1.2 ppb (0.4-4.4 ppb) and 2.1 ppb (0.7-5.7 ppb). The mean cup inclination was 43° (30°-60°) and anteversion was 18° (1°-47°). There was no clear relationship between serum ions and acetabular component orientation, outcome scores or range of movement. Patients with a head size ≤52 mm had significantly higher metal ion levels (cobalt P = 0.02, chromium P = 0.045).

CONCLUSION

Our preliminary results show all patients had cobalt and chromium levels below those indicating a high-risk implant, suggesting successful early outcome from minimally invasive total conservative hip resurfacing surgery.

Surface replacement of the hip

Attempts to resurface the hip joint date back to the 1930s. Throughout the last century many designs failed due to defective materials or fixation (or a combination). The metal-on-metal designs pioneered at the end of the century appeared to herald a new era, until difficulties associated with adverse reactions to metal debris were identified. Ultimately, a much narrower range of indications emerged - large, young males appear to be the ideal recipients. Implant design features and component orientation are crucial to the survivorship of these implants.

Metallic wear debris may regulate CXCR4 expression in vitro and in vivo

CXCR4, the chemokine receptor for CXCL12, also known as SDF-1 (stromal cell derived factor-1), has been shown to play a pivotal role in bone metastasis, inflammatory, and autoimmune conditions but has not been investigated in periprosthetic osteolysis. We co-cultured osteoblast-like cells with increasing concentrations of metallic (Co-35Ni-20Cr-10Mo and Co-28Cr-6Mo) and Co-ions simulating wear debris. Real-time polymerase chain reaction (RT-PCR) and Western blotting were used to quantify gene and protein expression of CXCR4. The expression of tumor necrosis factor-alpha (TNF-α) and the effects of AMD3100 (bicyclam) on both CXCR4 and TNF-α expression among these cells was investigated. RT-PCR showed an increase in CXCR4 mRNA (7.5-fold for MG63 and 4.0-fold for SaOs-2 cells) among cells co-cultured with metal alloy particles. Western blotting showed a time-dependent increase in protein expression of CXCR4. The attempted blockade of CXCR4 by its known competitive receptor agonist AMD3100 led to a significant inhibition TNF-α mRNA expression. Immunohistochemistry showed CXCR4 positivity among patients with failed metal-on-metal hip replacements and radiographic evidence of osteolysis. Our data collectively suggest that the CXCR4 chemokine is upregulated in a dose- and time-dependent manner in the presence of metallic wear debris.

A comparative assessment of small-head metal-on-metal and ceramic-on-polyethylene total hip replacement

Large-head metal-on-metal (MoM) total hip replacements (THR) have given rise to concern. Comparative studies of small-head MoM THRs over a longer follow-up period are lacking. Our objective was to compare the incidence of complications such as infection, dislocation, revision, adverse local tissue reactions, mortality and radiological and clinical outcomes in small-head (28 mm) MoM and ceramic-on-polyethylene (CoP) THRs up to 12 years post-operatively. A prospective cohort study included 3341 THRs in 2714 patients. The mean age was 69.1 years (range 24 to 98) and 1848 (55.3%) were performed in women, with a mean follow-up of 115 months (18 to 201). There were 883 MoM and 2458 CoP bearings. Crude incidence rates (cases/1000 person-years) were: infection 1.3 vs 0.8; dislocation 3.3 vs 3.1 and all-cause revision 4.3 vs 2.2, respectively. There was a significantly higher revision rate after ten years (adjusted hazard ratio 9.4; 95% CI 2.6 to 33.6) in the MoM group, and ten of 26 patients presented with an adverse local tissue reaction at revision. No differences in mortality, osteolysis or clinical outcome were seen. In conclusion, we found similar results for small-head MoM and CoP bearings up to ten years post-operatively, but after ten years MoM THRs had a higher risk of all-cause revision. Furthermore, the presence of an adverse response to metal debris seen in the small-head MOM group at revision is a cause for concern.

A lexicon for wear of metal-on-metal hip prostheses

Research on metal-on-metal (MoM) hip bearings has generated an extensive vocabulary to describe the wear processes and resultant surface damage. However, a lack of consistency and some redundancy exist in the current terminology. To facilitate the understanding of MoM tribology and to enhance communication of results among researchers and clinicians, we propose four categories of wear terminology: wear modes refer to the in vivo conditions under which the wear occurred; wear mechanisms refer to fundamental wear processes (adhesion, abrasion, fatigue, and tribochemical reactions); wear damage refers to the resultant changes in the morphology and/or composition of the surfaces; and wear features refer to the specific wear phenomena that are described in terms of the relevant modes, mechanisms, and damage. Clarifying examples are presented, but it is expected that terms will be added to the lexicon as new mechanisms and types of damage are identified. Corrosion refers to electrochemical processes that can remove or add material and thus also generate damage. Corrosion can act alone or may interact with mechanical wear. Examples of corrosion damage are also presented. However, an in-depth discussion of the many types of corrosion and their effects is beyond the scope of the present wear lexicon.

Ceramic on ceramic hip prostheses: a review of past and modern materials

Ceramic on ceramic hip prostheses are an increasingly popular choice for hip replacement. Modern manufacturing techniques and developments have increased the strength and reliability of ceramic materials. The alternative bearing couples such as metal-on-polyethylene and metal-on-metal are more inclined to wear and produce particulate debris. Despite reports of fractures and stripe wear, harder, more inert and more wear resistant, modern ceramic-ceramic hip replacements provide a strong alternative to traditional bearings.

Inflammatory pseudotumor complicated by recurrent dislocations after revision total hip arthroplasty

A 71-year-old female with a history of right total hip arthroplasty presented with an enlarging pseudotumor. Pseudotumor is a known complication following metal-on-metal and metal-on-conventional polyethylene and metal-on-highly cross-linked polyethylene implants. Revision total hip arthroplasty following resection of pseudotumor has resulted in an increase in incidence of postoperative complications. Despite stable implants, these complications arise from the amount of soft tissue damage combined with the loss of tissue support around the resected hip. Our case is a clear example of a major complication, recurrent dislocation, following resection and revision surgery.

Femoral neck remodelling after hip resurfacing surgery: a radiological study

BACKGROUND

Narrowing of the femoral neck under the femoral component of the hip resurfacing has been noted previously and has raised concern. In this study we examined the X-rays of patients following Birmingham hip resurfacing surgery at 6-years follow-up.

METHODS

Bony changes proximally and distally were measured. Fifty-two patients were available for evaluation.

RESULTS

There were 40 (76.9%) men and 12 (23.1%) women, with a mean age of 52 years (25-64). The unoperated contralateral femoral neck was measured as a control. We found femoral neck narrowing proximally in 82.7% of patients and distally in 26.9% and on the contralateral side in 54.5%. The average narrowing was 3.6%. Widening was observed proximally in 17.3% and distally in 73.1% and on the contralateral side in 45.5%. The average widening was 3.9%. Four of the 52 patients had proximal narrowing exceeding 10% of the femoral neck diameter, and one of the 52 patients had inferior narrowing exceeding 10%.

CONCLUSION

Gender, body mass index, component size and age did not affect remodelling. We conclude that the observed findings are likely to be a manifestation of a generalized remodelling response in the femoral neck rather than a localized and isolated narrowing at the junction of the component and the femoral neck.

The effect of a manufacturer recall on the threshold to revise a metal-on-metal hip

PURPOSE

Management of the unexplained, painful large diameter metal-on-metal (MOM) hip replacement is difficult. Although there are guidelines for surgeons, there is no clear documented evidence describing the overall threshold for revision surgery. The 2010 product recall of the DePuy Articular Surface Replacement (ASR) and subsequent media coverage may have increased patient and surgeon apprehension, resulting in earlier intervention, i.e. at a greater Oxford hip score (OHS) than expected. Our aim was to investigate whether the threshold for revision using known parameters was affected by the ASR recall. These parameters include poor clinical results (persistent pain or mechanical symptoms), pseudotumour or other progressive soft tissue involvement, osteolysis and high or rising metal ion levels.

METHODS

We used our national referral database of MOM hips, which were revised between 2008 and 2012. Once inclusion and exclusion criteria were applied, we identified 240 patients--71 patients in the pre-recall group and 169 patients in the post-recall group.

RESULTS

The ASR product recall did not seem to affect the threshold for revision of a MOM hip, with no significant difference between the two groups in terms of the functional (median OHS = 17 pre-recall and 20 post-recall; p = 0.2109) and radiological (median inclination angle = 50 pre-recall and 48 post-recall; p = 0.3221) markers used to guide management. We did however discover that blood metal ion levels were higher in the post-recall group.

CONCLUSION

Issue of a product recall did not change the hip function threshold for revision surgery. The decision to revise a metal-on-metal hip is complex and should follow published guidelines, encompassing metal ion measurement and cross-sectional imaging where appropriate.

On the inflammatory response in metal-on-metal implants

Background

Metal-on-metal implants are a special form of hip endoprostheses that despite many advantages can entail serious complications due to release of wear particles from the implanted material. Metal wear particles presumably activate local host defence mechanisms, which causes a persistent inflammatory response with destruction of bone followed by a loosening of the implant. To better characterize this inflammatory response and to link inflammation to bone degradation, the local generation of proinflammatory and osteoclast-inducing cytokines was analysed, as was systemic T cell activation.

Methods

By quantitative RT-PCR, gene expression of cytokines and markers for T lymphocytes, monocytes/macrophages and osteoclasts, respectively, was analysed in tissue samples obtained intraoperatively during exchange surgery of the loosened implant. Peripheral T cells were characterized by cytofluorometry before surgery and 7 to 10 days thereafter.

Results

At sites of osteolysis, gene expression of cathepsin K, CD14 and CD3 was seen, indicating the generation of osteoclasts, and the presence of monocytes and of T cells, respectively. Also cytokines were highly expressed, including CXCL8, IL-1ß, CXCL2, MRP-14 and CXCL-10. The latter suggest T cell activation, a notion that could be confirmed by detecting a small, though conspicuous population of activated CD4+ cells in the peripheral blood T cells prior to surgery.

Conclusion

Our data support the concept that metallosis is the result of a local inflammatory response, which according to histomorphology and the composition of the cellular infiltrate classifies as an acute phase of a chronic inflammatory disease. The proinflammatory environment, particularly the generation of the osteoclast-inducing cytokines CXCL8 and IL1-ß, promotes bone resorption. Loss of bone results in implant loosening, which then causes the major symptoms of metallosis, pain and reduced range of motion.

Raised levels of metal ions in the blood in patients who have undergone uncemented metal-on-polyethylene Trident-Accolade total hip replacement

The issues surrounding raised levels of metal ions in the blood following large head metal-on-metal total hip replacement (THR), such as cobalt and chromium, have been well documented. Despite the national popularity of uncemented metal-on-polyethylene (MoP) THR using a large-diameter femoral head, few papers have reported the levels of metal ions in the blood following this combination. Following an isolated failure of a 44 mm Trident-Accolade uncemented THR associated with severe wear between the femoral head and the trunnion in the presence of markedly elevated levels of cobalt ions in the blood, we investigated the relationship between modular femoral head diameter and the levels of cobalt and chromium ions in the blood following this THR. A total of 69 patients received an uncemented Trident-Accolade MoP THR in 2009. Of these, 43 patients (23 men and 20 women, mean age 67.0 years) were recruited and had levels of cobalt and chromium ions in the blood measured between May and June 2012. The patients were then divided into three groups according to the diameter of the femoral head used: 12 patients in the 28 mm group (controls), 18 patients in the 36 mm group and 13 patients in the 40 mm group. A total of four patients had identical bilateral prostheses in situ at phlebotomy: one each in the 28 mm and 36 mm groups and two in the 40 mm group. There was a significant increase in the mean levels of cobalt ions in the blood in those with a 36 mm diameter femoral head compared with those with a 28 mm diameter head (p = 0.013). The levels of cobalt ions in the blood were raised in those with a 40 mm diameter head but there was no statistically significant difference between this group and the control group (p = 0.152). The levels of chromium ions in the blood were normal in all patients. The clinical significance of this finding is unclear, but we have stopped using femoral heads with a diameter of ≤ 36 mm, and await further larger studies to clarify whether, for instance, this issue particularly affects this combination of components.

Accuracy of methods for calculating volumetric wear from coordinate measuring machine data of retrieved metal-on-metal hip joint implants

This study compared the accuracy and sensitivity of several numerical methods employing spherical or plane triangles for calculating the volumetric wear of retrieved metal-on-metal hip joint implants from coordinate measuring machine measurements. Five methods, one using spherical triangles and four using plane triangles to represent the bearing and the best-fit surfaces, were assessed and compared on a perfect hemisphere model and a hemi-ellipsoid model (i.e. unworn models), computer-generated wear models and wear-tested femoral balls, with point spacings of 0.5, 1, 2 and 3 mm. The results showed that the algorithm (Method 1) employing spherical triangles to represent the bearing surface and to scale the mesh to the best-fit surfaces produced adequate accuracy for the wear volume with point spacings of 0.5, 1, 2 and 3 mm. The algorithms (Methods 2-4) using plane triangles to represent the bearing surface and to scale the mesh to the best-fit surface also produced accuracies that were comparable to that with spherical triangles. In contrast, if the bearing surface was represented with a mesh of plane triangles and the best-fit surface was taken as a smooth surface without discretization (Method 5), the algorithm produced much lower accuracy with a point spacing of 0.5 mm than Methods 1-4 with a point spacing of 3 mm.

Use of graphene as protection film in biological environments

Corrosion of metal in biomedical devices could cause serious health problems to patients. Currently ceramics coating materials used in metal implants can reduce corrosion to some extent with limitations. Here we proposed graphene as a biocompatible protective film for metal potentially for biomedical application. We confirmed graphene effectively inhibits Cu surface from corrosion in different biological aqueous environments. Results from cell viability tests suggested that graphene greatly eliminates the toxicity of Cu by inhibiting corrosion and reducing the concentration of Cu²⁺ ions produced. We demonstrated that additional thiol derivatives assembled on graphene coated Cu surface can prominently enhance durability of sole graphene protection limited by the defects in graphene film. We also demonstrated that graphene coating reduced the immune response to metal in a clinical setting for the first time through the lymphocyte transformation test. Finally, an animal experiment showed the effective protection of graphene to Cu under in vivo condition. Our results open up the potential for using graphene coating to protect metal surface in biomedical application.

Asymptomatic pseudotumours after metal-on-metal hip resurfacing show little change within one year

The aim of this study was to establish the natural course of unrevised asymptomatic pseudotumours after metal-on-metal (MoM) hip resurfacing during a six- to 12-month follow-up period. We used repeated metal artefact reduction sequence (MARS)-magnetic resonance imaging (MRI), serum metal ion analysis and clinical examination to study 14 unrevised hips (mean patient age 52.7 years, 46 to 68, 5 female, 7 male) with a pseudotumour and 23 hips (mean patient age 52.8 years, 38 to 69, 7 female, 16 male) without a pseudotumour. The mean post-operative time to the first MARS-MRI scan was 4.3 years (2.2 to 8.3), and mean time between the first and second MARS-MRI scan was eight months (6 to 12). At the second MRI scan, the grade of severity of the pseudotumour had not changed in 35 hips. One new pseudotumour (Anderson C2 score, moderate) was observed, and one pseudotumour was downgraded from C2 (moderate) to C1 (mild). In general, the characteristics of the pseudotumours hardly changed. Repeated MARS-MRI scans within one year in patients with asymptomatic pseudotumours after MoM hip resurfacing showed little or no variation. In 23 patients without pseudotumour, one new asymptomatic pseudotumour was detected. This is the first longitudinal study on the natural history of pseudotumours using MARS-MRI scans in hip resurfacing, and mirrors recent results for 28 mm diameter MoM total hip replacement.

A new technique for radiographic measurement of acetabular cup orientation

Accurate radiographic measurement of acetabular cup orientation is required in order to assess susceptibility to impingement, dislocation, and edge loading wear. In this study, the accuracy and precision of a new radiographic cup orientation measurement system were assessed and compared to those of two commercially available systems. Two types of resurfacing hip prostheses and an uncemented prosthesis were assessed. Radiographic images of each prosthesis were created with the cup set at different, known angles of version and inclination in a measurement jig. The new system was the most accurate and precise and could repeatedly measure version and inclination to within a fraction of a degree. In addition it has a facility to distinguish cup retroversion from anteversion on anteroposterior radiographs.

The current state of bearing surfaces in total hip replacement

We reviewed the literature on the currently available choices of bearing surface in total hip replacement (THR). We present a detailed description of the properties of articulating surfaces review the understanding of the advantages and disadvantages of existing bearing couples. Recent technological developments in the field of polyethylene and ceramics have altered the risk of fracture and the rate of wear, although the use of metal-on-metal bearings has largely fallen out of favour, owing to concerns about reactions to metal debris. As expected, all bearing surface combinations have advantages and disadvantages. A patient-based approach is recommended, balancing the risks of different options against an individual’s functional demands.

Cite this article: Bone Joint J 2014;96-B:147–56.

Nationwide investigation into adverse tissue reactions to metal debris after metal-on-metal total hip arthroplasty in Japan

BACKGROUND

Adverse reactions to metal debris (ARMD) after receiving metal-on-metal (MoM) hip implants is a recent concern. However, no epidemiologic study has examined ARMD for MoM hip implants in Japan. The purposes of this study were to research the incidence of ARMD and to identify poorly performing MoM hip implants in Japan.

METHODS

From 2000 to 2011, 7 companies provided 23,226 MoM implants in Japan. A questionnaire regarding ARMD was sent to 101 hospitals at which 62% of the 23,226 MoM implants had been used.

RESULTS

Replies to the questionnaire were received from 82 hospitals. In these hospitals, surface hip replacement types (SRs) were used in 606 hips and stemmed types were used in 12,961 hips. ARMD were reported in 3 hips (0.5%) with SRs and 160 hips (1.2%) with stemmed types. ARMD in the 3 hips with SRs were asymptomatic and no revisions were performed. Among AMRD with stemmed implants, revision was performed in 83 hips and excision of an ARMD lesion was performed in 3 hips. The remaining 74 hips were asymptomatic and careful follow-up was continued. A significant difference in reoperation rate was evident between SRs (0%) and stemmed types (0.7%). Incidences of ARMD were significantly higher with Ultamet (P = 0.005), Conserve (P < 0.001), and Cormet (P < 0.001) MoM bearing couples than with Metasul bearings.

CONCLUSIONS

The incidence of ARMD in large surgical volume hospitals in Japan from 2000 to 2011 was estimated to be 0.5% with SRs and 1.2% with stemmed types. The reoperation rate was significantly higher with stemmed types than with SRs. Three brands of MoM stemmed implants were identified as showing a higher incidence of ARMD.

Minimum ten-year results of a 28-mm metal-on-metal bearing in cementless total hip arthroplasty in patients fifty years of age and younger

PURPOSE

Concerns have been raised in relation to metal-on-metal (MoM) articulations with catastrophic soft-tissue reactions due to metal debris. We reviewed how small head MoM articulations perform in primary uncemented total hip arthroplasty (THA) in young patients at a minimum of ten years.

METHODS

We retrospectively evaluated the clinical and radiographic results of the first 100 consecutive primary cementless THAs using the 28-mm Metasul MoM articulation in 91 patients younger than 50 years of age at the time of surgery.

RESULTS

After 13 years, survival for the endpoint revision due to any reason was 90.9 % and 98.9 % for revision due to aseptic implant loosening. The cumulative incidence of MoM related revisions was 1.2 %. Small proximal femoral osteolysis was found in 18 % of hips. No acetabular osteolysis or loosening was detected. Two hips showed signs of femoral neck impingement with severe damage to the neck.

CONCLUSIONS

Early in the second decade, MoM-associated complications were rare using the 28-mm Metasul articulation, and aseptic loosening was not a major mode of failure in this cohort of young patients.

LEVEL OF EVIDENCE

Therapeutic Level IV.

Adverse reaction to metal debris after ReCap-M2A-Magnum large-diameter-head metal-on-metal total hip arthroplasty

BACKGROUND AND PURPOSE

The clinical findings of adverse reaction to metal debris (ARMD) following large-diameter-head metal-on-metal total hip arthroplasty (LDH MoM THA) may include periarticular fluid collections, soft tissue masses, and gluteal muscle necrosis. The ReCap-M2a-Magnum LDH MoM THA was the most commonly used hip device at our institution from 2005 to 2012. We assessed the prevalence of and risk factors for ARMD with this device.

METHODS

74 patients (80 hips) had a ReCap-M2a-Magnum LDH MoM THA during the period August 2005 to December 2006. These patients were studied with hip MRI, serum chromium and cobalt ion measurements, the Oxford hip score questionnaire, and by clinical examination. The prevalence of ARMD was recorded and risk factors for ARMD were assessed using logistic regression models. The mean follow-up time was 6.0 (5.5-6.7) years.

RESULTS

A revision operation due to ARMD was needed by 3 of 74 patients (3 of 80 hips). 8 additional patients (8 hips) had definite ARMD, but revision was not performed. 29 patients (32 hips) were considered to have a probable or possible ARMD. Altogether, 43 of 80 hips had a definite, probable, or possible ARMD and 34 patients (37 hips) were considered not to have ARMD. In 46 of 78 hips, MRI revealed a soft tissue mass or a collection of fluid (of any size). The symptoms clicking in the hip, local hip swelling, and a feeling of subluxation were associated with ARMD.

INTERPRETATION

ARMD is common after ReCap-M2a-Magnum total hip arthroplasty, and we discourage the use of this device. Asymptomatic patients with a small fluid collection on MRI may not need instant revision surgery but must be followed up closely.

Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography

Widespread concern exists about adverse tissue reactions after metal-on-metal (MoM) total hip replacement (THR). Concerns have also been expressed with wear and corrosion of taper junctions in THR. We report the effect of surface finish and contact area associated with a single combination of materials of modular tapers. In an in vitro test, we investigated the head/neck (CoCrMo/Ti) interface of modular THRs using commercially available heads. Wear and corrosion of taper surfaces was compared following a 10 million loading cycle. Surface parameters and profiles were measured before and after testing. Electrochemical static and dynamic corrosion tests were performed under loaded and non-loaded conditions. After the load test, the surface roughness parameters on the head taper were significantly increased where the head/neck contact area was reduced. Similarly, the surface roughness parameters on the head taper were significantly increased where rough neck tapers were used. Corrosion testing showed breaching of the passive film on the rough but not the smooth neck tapers. Thus, surface area and surface finish are important factors in wear and corrosion at modular interfaces.

Modular neck femoral stems

Following the recall of modular neck hip stems in July 2012, research into femoral modularity will intensify over the next few years. This review aims to provide surgeons with an up-to-date summary of the clinically relevant evidence. The development of femoral modularity, and a classification system, is described. The theoretical rationale for modularity is summarised and the clinical outcomes are explored. The review also examines the clinically relevant problems reported following the use of femoral stems with a modular neck. Joint replacement registries in the United Kingdom and Australia have provided data on the failure rates of modular devices but cannot identify the mechanism of failure. This information is needed to determine whether modular neck femoral stems will be used in the future, and how we should monitor patients who already have them implanted.