SPIDER and WEB: processing and visualization of images in 3D electron microscopy and related fields

Three-dimensional organization of the archaeal A1-ATPase from Methanosarcina mazei Gö1

A modified isolation procedure provides a homogeneous A(1)-ATPase from the archaeon Methanosarcina mazei Gö1, containing the five subunits in stoichiometric amounts of A(3):B(3):C:D:F. A(1) obtained in this way was characterized by three-dimensional electron microscopy of single particles, resulting in the first three-dimensional reconstruction of an A(1)-ATPase at a resolution of 3.2 nm. The A(1) consists of a headpiece of 10.2 nm in diameter and 10.8 nm in height, formed by the six elongated subunits A(3) and B(3). At the bottom of the A(3)B(3) complex, a stalk of 3.0 nm in length can be seen. The A(3)B(3) domain surrounds a large cavity that extends throughout the length of the A(3)B(3) barrel. A part of the stalk penetrates inside this cavity and is displaced toward an A-B-A triplet. To investigate further the topology of the stalk subunits C-F in A(1), cross-linking has been carried out by using dithiobis[sulfosuccinimidylpropionate] (DSP) and 1-ethyl-3-(dimethylaminopropyl)-carbodiimide (EDC). In experiments where DSP was added the cross-linked products B-F, A(x)-D, A-B-D, and A(x)-B(x)-D were formed. Subunits B-F, A-D, A-B-D, and A-B-C-D could be cross-linked by EDC. The subunit-subunit interaction in the presence of DSP was also studied as a function of nucleotide binding, demonstrating movements of subunits C, D, and F during ATP cleavage. Finally, the three-dimensional organization of this A(1) complex is discussed in terms of the relationship to the F(1)- and V(1)-ATPases at a resolution of 3.2 nm.

Domain movements of elongation factor eEF2 and the eukaryotic 80S ribosome facilitate tRNA translocation

An 11.7-A-resolution cryo-EM map of the yeast 80S.eEF2 complex in the presence of the antibiotic sordarin was interpreted in molecular terms, revealing large conformational changes within eEF2 and the 80S ribosome, including a rearrangement of the functionally important ribosomal intersubunit bridges. Sordarin positions domain III of eEF2 so that it can interact with the sarcin-ricin loop of 25S rRNA and protein rpS23 (S12p). This particular conformation explains the inhibitory action of sordarin and suggests that eEF2 is stalled on the 80S ribosome in a conformation that has similarities with the GTPase activation state. A ratchet-like subunit rearrangement (RSR) occurs in the 80S.eEF2.sordarin complex that, in contrast to Escherichia coli 70S ribosomes, is also present in vacant 80S ribosomes. A model is suggested, according to which the RSR is part of a mechanism for moving the tRNAs during the translocation reaction.

Three-dimensional structure of C complex spliceosomes by electron microscopy

The spliceosome is a multimegadalton RNA-protein machine that removes noncoding sequences from nascent pre-mRNAs. Recruitment of the spliceosome to splice sites and subsequent splicing require a series of dynamic interactions among the spliceosome's component U snRNPs and many additional protein factors. These dynamics present several challenges for structural analyses, including purification of stable complexes to compositional homogeneity and assessment of conformational heterogeneity. We have isolated spliceosomes arrested before the second chemical step of splicing (C complex) in which U2, U5 and U6 snRNAs are stably associated. Using electron microscopy, we obtained images of C complex spliceosomes under cryogenic conditions and determined a three-dimensional structure of a core complex to a resolution of 30 A. The structure reveals a particle of dimensions 27 x 22 x 24 nm with a relatively open arrangement of three primary domains.

Unusual IgM fibrillar deposits in glomerulonephritis: ultrastructural and diffraction studies in a case report

Morphological examination of 2 renal biopsy specimens obtained from a 69-year-old woman with a nephrotic syndrome, high blood pressure, and a reduced glomerular filtration rate revealed, in ultrastructural study, a type of a glomerulonephritis with fibrillar deposits in a subendothelial position which were unusual in their immunoglobulin components (mainly IgM). The fibrillar components were of irregular size, 13 to 18 nm in diameter and presented a very particular "barbed wire" morphological aspect, not hitherto described. Diffraction studies and image analysis, revealed spiraled fibrils with regular alternating elements that we suggest may correspond to IgM molecules. The clinical (isolated renal symptoms) and laboratory (traces of 3 monoclonal components in the serum and 2 normal bone marrow biopsy specimens) data provided no evidence of hematopoietic malignancy, viral hepatitis or cryoglobulinemia.

Regulation of KinI kinesin ATPase activity by binding to the microtubule lattice

KinI kinesins are important in regulating the complex dynamics of the microtubule cytoskeleton. They are unusual in that they depolymerize, rather than move along microtubules. To determine the attributes of KinIs that distinguish them from translocating kinesins, we examined the ATPase activity, microtubule affinity, and three-dimensional microtubule-bound structure of a minimal KinI motor domain. Together, the kinetic, affinity, and structural data lead to the conclusion that on binding to the microtubule lattice, KinIs release ADP and enter a stable, low-affinity, regulated state, from which they do not readily progress through the ATPase cycle. This state may favor detachment, or diffusion of the KinI to its site of action, the microtubule ends. Unlike conventional translocating kinesins, which are microtubule lattice–stimulated ATPases, it seems that with KinIs, nucleotide-mediated modulation of tubulin affinity is only possible when it is coupled to protofilament deformation. This provides an elegant mechanistic basis for their unique depolymerizing activity.

Large T antigen on the simian virus 40 origin of replication: a 3D snapshot prior to DNA replication

Large T antigen is the replicative helicase of simian virus 40. Its specific binding to the origin of replication and oligomerization into a double hexamer distorts and unwinds dsDNA. In viral replication, T antigen acts as a functional homolog of the eukaryotic minichromosome maintenance factor MCM. T antigen is also an oncoprotein involved in transformation through interaction with p53 and pRb. We obtained the three-dimensional structure of the full-length T antigen double hexamer assembled at its origin of replication by cryoelectron microscopy and single-particle reconstruction techniques. The double hexamer shows different degrees of bending along the DNA axis. The two hexamers are differentiated entities rotated relative to each other. Isolated strands of density, putatively assigned to ssDNA, protrude from the hexamer-hexamer junction mainly at two opposite sites. The structure of the T antigen at the origin of replication can be understood as a snapshot of the dynamic events leading to DNA unwinding. Based on these results a model for the initiation of simian virus 40 DNA replication is proposed.

The Three-dimensional Structure of the Cardiac L-type Voltage-gated Calcium Channel

We describe here the first three-dimensional structure of the cardiac L-type voltage-gated calcium channel (VGCC) purified from bovine heart. The structure was determined by electron microscopy and single particle analysis of negatively stained complexes, using the angular reconstitution method. The cardiac VGCC can be isolated as a stable dimer, as reported previously for the skeletal muscle VGCC, with a central aqueous chamber formed by the two halves of the complex. Moreover, we demonstrate that the dimeric cardiac VGCC binds the dihydropyridine [3H]azidopine with a Kd approximately 310 pM. We have compared the cardiac VGCC structure with the skeletal muscle form, determined using the same reconstructive methodology, allowing us to identify common and distinct features of the complexes. By using antibody and lectin-gold labeling, we have localized the intracellular beta polypeptides and the extracellular glycosylation sites of the skeletal muscle VGCC, which can be correlated to the cardiac three-dimensional structure. From the data presented here the assignment of the orientation of the VGCC complexes with respect to the lipid bilayer is now possible. A difference between the cardiac and skeletal muscle ion channels is apparent in the putative transmembrane region, which would be consistent with the absence of the gamma subunit in the cardiac VGCC assembly.

Correlation-based methods of automatic particle detection in electron microscopy images with smoothing by anisotropic diffusion

Two methods of correlation-based automatic particle detection in electron microscopy images are compared - computing a cross-correlation function or a local correlation coefficient vs. azimuthally averaged reference projections (either from a model or from experimental particle images). The ability of smoothing images by anisotropic diffusion to improve the performance of particle detection is also considered. Anisotropic diffusion is an effective method of preprocessing that enhances the edges and overall shape of particles while reducing noise. It is found that anisotropic diffusion improves particle detection by a local correlation coefficient when projections from a high-resolution reconstruction are used as references. When references from experimental particle images are used, a cross-correlation function shows a more marked improvement in particle detection in images smoothed by anisotropic diffusion.

Comparative analyses of the three-dimensional structures and enzymatic properties of alpha, beta, gamma and delta isoforms of Ca2+-calmodulin-dependent protein kinase II

Ca(2+)-calmodulin-dependent protein kinase II (CaM-kinase II) is a ubiquitous Ser/Thr-directed protein kinase that is expressed from a family of four genes (alpha, beta, gamma, and delta) in mammalian cells. We have documented the three-dimensional structures and the biophysical and enzymatic properties of the four gene products. Biophysical analyses showed that each isoform assembles into oligomeric forms and their three-dimensional structures at 21-25 A revealed that all four isoforms were dodecamers with similar but highly unusual architecture. A gear-shaped core comprising the association domain has the catalytic domains tethered on appendages, six of which extend from both ends of the core. At this level of resolution, we can discern no isoform-dependent differences in ultrastructure of the holoenzymes. Enzymatic analyses showed that the isoforms were similar in their K(m) for ATP and the peptide substrate syntide, but showed significant differences in their interactions with Ca(2+)-calmodulin as assessed by binding, substrate phosphorylation, and autophosphorylation. Interestingly, the rank order of CaM binding affinity (gamma > beta > delta > alpha) does not directly correlate with the rank order of their CaM dependence for autophosphorylation (beta > gamma > delta > alpha). Simulations utilizing this data revealed that the measured differences in CaM binding affinities play a minor role in the autophosphorylation of the enzyme, which is largely dictated by the rate of autophosphorylation for each isoform.

The crystal structure of the bifunctional primase-helicase of bacteriophage T7

Within minutes after infecting Escherichia coli, bacteriophage T7 synthesizes many copies of its genomic DNA. The lynchpin of the T7 replication system is a bifunctional primase-helicase that unwinds duplex DNA at the replication fork while initiating the synthesis of Okazaki fragments on the lagging strand. We have determined a 3.45 A crystal structure of the T7 primase-helicase that shows an articulated arrangement of the primase and helicase sites. The crystallized primase-helicase is a heptamer with a crown-like shape, reflecting an intimate packing of helicase domains into a ring that is topped with loosely arrayed primase domains. This heptameric isoform can accommodate double-stranded DNA in its central channel, which nicely explains its recently described DNA remodeling activity. The double-jointed structure of the primase-helicase permits a free range of motion for the primase and helicase domains that suggests how the continuous unwinding of DNA at the replication fork can be periodically coupled to Okazaki fragment synthesis.

X-ray tomography generates 3-D reconstructions of the yeast, saccharomyces cerevisiae, at 60-nm resolution

We examined the yeast, Saccharomyces cerevisiae, using X-ray tomography and demonstrate unique views of the internal structural organization of these cells at 60-nm resolution. Cryo X-ray tomography is a new imaging technique that generates three-dimensional (3-D) information of whole cells. In the energy range of X-rays used to examine cells, organic material absorbs approximately an order of magnitude more strongly than water. This produces a quantifiable natural contrast in fully hydrated cells and eliminates the need for chemical fixatives or contrast enhancement reagents to visualize cellular structures. Because proteins can be localized in the X-ray microscope using immunogold labeling protocols (Meyer-Ilse et al., 2001. J. Microsc. 201, 395-403), tomography enables 3-D molecular localization. The time required to collect the data for each cell shown here was <15 min and has recently been reduced to 3 min, making it possible to examine numerous yeast and to collect statistically significant high-resolution data. In this video essay, we show examples of 3-D tomographic reconstructions of whole yeast and demonstrate the power of this technology to obtain quantifiable information from whole, hydrated cells.

3D structure of the influenza virus polymerase complex: localization of subunit domains

The 3D structure of the influenza virus polymerase complex was determined by electron microscopy and image processing of recombinant ribonucleoproteins (RNPs). The RNPs were generated by in vivo amplification using cDNAs of the three polymerase subunits, the nucleoprotein, and a model virus-associated RNA containing 248 nt. The polymerase structure obtained is very compact, with no apparent boundaries among subunits. The position of specific regions of the PB1, PB2, and PA subunits was determined by 3D reconstruction of either RNP-mAb complexes or tagged RNPs. This structural model is available for the polymerase of a negative-stranded RNA virus and provides a general delineation of the complex and its interaction with the template-associated nucleoprotein monomers in the RNP.

Domain movements of HAP2 in the cap-filament complex formation and growth process of the bacterial flagellum

The cap at the growing end of the bacterial flagellum is essential for its growth, remaining stably attached while permitting the insertion of flagellin transported from the cytoplasm through the narrow central channel. We analyzed the structure of the isolated cap in its frozen hydrated state by electron cryomicroscopy. The 3D density map now shows detailed features of domains and their connections, giving reliable volumes and masses, making assignment of the domains to the amino acid sequence possible. A model of the cap-filament complex built with an atomic model of the filament allows a quantitative analysis of the cap domain movements on cap binding and rotation that promotes the efficient self assembly of flagellin during the filament growth process.

Tomographic reconstruction of treponemal cytoplasmic filaments reveals novel bridging and anchoring components

An understanding of the involvement of bacterial cytoplasmic filaments in cell division requires the elucidation of the structural organization of those filamentous structures. Treponemal cytoplasmic filaments are composed of one protein, CfpA, and have been demonstrated to be involved in cell division. In this study, we used electron tomography to show that the filaments are part of a complex with a novel molecular organization that includes at least two distinct features decorating the filaments. One set of components appears to anchor the filaments to the cytoplasmic membrane. The other set of components appears to bridge the cytoplasmic filaments on the cytoplasmic side, and to be involved in the interfilament spacing within the cell. The filaments occupy between 3 and 18% of the inner surface of the cytoplasmic membrane. These results reveal a novel filamentous molecular organization of independent filaments linked by bridges and continuously anchored to the membrane.

ADF/cofilin use an intrinsic mode of F-actin instability to disrupt actin filaments

Proteins in the ADF/cofilin (AC) family are essential for rapid rearrangements of cellular actin structures. They have been shown to be active in both the severing and depolymerization of actin filaments in vitro, but the detailed mechanism of action is not known. Under in vitro conditions, subunits in the actin filament can treadmill; with the hydrolysis of ATP driving the addition of subunits at one end of the filament and loss of subunits from the opposite end. We have used electron microscopy and image analysis to show that AC molecules effectively disrupt one of the longitudinal contacts between protomers within one helical strand of F-actin. We show that in the absence of any AC proteins, this same longitudinal contact between actin protomers is disrupted at the depolymerizing (pointed) end of actin filaments but is prominent at the polymerizing (barbed) end. We suggest that AC proteins use an intrinsic mechanism of F-actin's internal instability to depolymerize/sever actin filaments in the cell.

Structure of an Influenza Neuraminidase–Diabody Complex by Electron Cryomicroscopy and Image Analysis

The structure of a complex between a bivalent diabody and its antigen, influenza neuraminidase, has been determined by electron cryomicroscopy of single particles and image analysis. A three-dimensional reconstruction has been interpreted in terms of high-resolution X-ray models of the component proteins. The complex consists of two neuraminidase tetramers cross-linked by four diabodies with 422 point symmetry. The structure and symmetry of the complex is determined uniquely by packing constraints consistent with the maximum possible number of diabody cross-links. Diabodies may provide a useful approach to the structure determination of small proteins by incorporating the proteins into large symmetric complexes followed by single-particle electron microscopy.

Automated three-dimensional reconstruction of keyhole limpet hemocyanin type 1

We have reconstructed a three-dimensional map of keyhole limpet hemocyanin isoform 1 (KLH1), using our automated data collection software, Leginon, integrated with particle selection algorithms, and the SPIDER reconstruction package. KLH1, a 7.9 MDa macromolecule, is an extracellular respiratory pigment composed of two asymmetric decamers, and presents an overall D(5) point-group symmetry. The reconstruction is in agreement with previous data published on molluscan hemocyanins. The reconstructed map (11.3A resolution, 3sigma criterion) was used to fit an available X-ray crystallography structure of Octopus dofleini Odg, solved at 2.3A [J. Mol. Biol. 278 (4) (1998) 855], with satisfactory results. The results validate the approach of automating the cryoEM process and demonstrate that the quality of the images acquired and the particles selected is comparable to those obtained using manual methods. Several problems remain to be solved however before these results can be generalized.

RNA packaging device of double-stranded RNA bacteriophages, possibly as simple as hexamer of P4 protein

Genomes of complex viruses have been demonstrated, in many cases, to be packaged into preformed empty capsids (procapsids). This reaction is performed by molecular motors translocating nucleic acid against the concentration gradient at the expense of NTP hydrolysis. At present, the molecular mechanisms of packaging remain elusive due to the complex nature of packaging motors. In the case of the double-stranded RNA bacteriophage phi 6 from the Cystoviridae family, packaging of single-stranded genomic precursors requires a hexameric NTPase, P4. In the present study, the purified P4 proteins from two other cystoviruses, phi 8 and phi 13, were characterized and compared with phi 6 P4. All three proteins are hexameric, single-stranded RNA-stimulated NTPases with alpha/beta folds. Using a direct motor assay, we found that phi 8 and phi 13 P4 hexamers translocate 5' to 3' along ssRNA, whereas the analogous activity of phi 6 P4 requires association with the procapsid. This difference is explained by the intrinsically high affinity of phi 8 and phi 13 P4s for nucleic acids. The unidirectional translocation results in RNA helicase activity. Thus, P4 proteins of Cystoviridae exhibit extensive similarity to hexameric helicases and are simple models for studying viral packaging motor mechanisms.

Structural characterisation of neuronal voltage-sensitive K+ channels heterologously expressed in Pichia pastoris

Neuronal voltage-dependent K(+) channels of the delayed rectifier type consist of multiple Kv alpha subunit variants, which assemble as hetero- or homotetramers, together with four Kv beta auxiliary subunits. Direct structural information on these proteins has not been forthcoming due to the difficulty in isolating the native K(+) channels. We have overexpressed the subunit genes in the yeast Pichia pastoris. The Kv1.2 subunit expressed alone is shown to fold into a native conformation as determined by high-affinity binding of 125I-labelled alpha-dendrotoxin, while co-expressed Kv1.2 and Kv beta 2 subunits co-assembled to form native-like oligomers. Sites of post-translational modifications causing apparent heterogeneity on SDS-PAGE were identified by site-directed mutagenesis. Engineering to include affinity tags and scale-up of production by fermentation allowed routine purification of milligram quantities of homo- and heteroligomeric channels. Single-particle electron microscopy of the purified channels was used to generate a 3D volume to 2.1 nm resolution. Protein domains were assigned by fitting crystal structures of related bacterial proteins. Addition of exogenous lipid followed by detergent dialysis produced well-ordered 2D crystals that exhibited mostly p12(1) symmetry. Projection maps of negatively stained crystals show the constituent molecules to be 4-fold symmetric, as expected for the octameric K(+) channel complex.

Conformational changes in the C terminus of Shaker K+ channel bound to the rat Kvbeta2-subunit

We studied the structure of the C terminus of the Shaker potassium channel. The 3D structures of the full-length and a C-terminal deletion (Delta C) mutant of Shaker were determined by electron microscopy and single-particle analysis. The difference map between the full-length and the truncated channels clearly shows a compact density, located on the sides of the T1 domain, that corresponds to a large part of the C terminus. We also expressed and purified both WT and Delta C Shaker, assembled with the rat KvBeta2-subunit. By using a difference map between the full-length and truncated Shaker alpha-beta complexes, a conformational change was identified that shifts a large part of the C terminus away from the membrane domain and into close contact with the Beta-subunit. This conformational change, induced by the binding of the KvBeta2-subunit, suggests a possible mechanism for the modulation of the K+ voltage-gated channel function by its Beta-subunit.

Electron cryo-microscopy shows how strong binding of myosin to actin releases nucleotide

Muscle contraction involves the cyclic interaction of the myosin cross-bridges with the actin filament, which is coupled to steps in the hydrolysis of ATP. While bound to actin each cross-bridge undergoes a conformational change, often referred to as the "power stroke", which moves the actin filament past the myosin filaments; this is associated with the release of the products of ATP hydrolysis and a stronger binding of myosin to actin. The association of a new ATP molecule weakens the binding again, and the attached cross-bridge rapidly dissociates from actin. The nucleotide is then hydrolysed, the conformational change reverses, and the myosin cross-bridge reattaches to actin. X-ray crystallography has determined the structural basis of the power stroke, but it is still not clear why the binding of actin weakens that of the nucleotide and vice versa. Here we describe, by fitting atomic models of actin and the myosin cross-bridge into high-resolution electron cryo-microscopy three-dimensional reconstructions, the molecular basis of this linkage. The closing of the actin-binding cleft when actin binds is structurally coupled to the opening of the nucleotide-binding pocket.

RNA Polymerase II/TFIIF Structure and Conserved Organization of the Initiation Complex

The structure of an RNA polymerase II/general transcription factor TFIIF complex was determined by cryo-electron microscopy and single particle analysis. Density due to TFIIF was not concentrated in one area but rather was widely distributed across the surface of the polymerase. The largest subunit of TFIIF interacted with the dissociable Rpb4/Rpb7 polymerase subunit complex and with the mobile "clamp." The distribution of the second largest subunit of TFIIF was very similar to that previously reported for the sigma subunit in the bacterial RNA polymerase holoenzyme, consisting of a series of globular domains extending along the polymerase active site cleft. This result indicates that the second TFIIF subunit is a true structural homolog of the bacterial sigma factor and reveals an important similarity of the transcription initiation mechanism between bacteria and eukaryotes. The structure of the RNAPII/TFIIF complex suggests a model for the organization of a minimal transcription initiation complex.

A statistical approach to computer processing of cryo-electron microscope images: virion classification and 3-D reconstruction

The scattering density of the virus is represented as a truncated weighted sum of orthonormal basis functions in spherical coordinates, where the angular dependence of each basis function has icosahedral symmetry. A statistical model of the image formation process is proposed and the maximum likelihood estimation method computed by an expectation-maximization algorithm is used to estimate the weights in the sum and thereby compute a 3-D reconstruction of the virus particle. If multiple types of virus particle are represented in the boxed images then multiple 3-D reconstructions are computed simultaneously without first requiring that the type of particle shown in each boxed image be determined. Examples of the procedure are described for viruses with known structure: (1). 3-D reconstruction of Flockhouse Virus from experimental images, (2). 3-D reconstruction of the capsid of Nudaurelia Omega Capensis Virus from synthetic images, and (3). 3-D reconstruction of both the capsid and the procapsid of Nudaurelia Omega Capensis Virus from a mixture of unclassified synthetic images.

Low-resolution structure refinement in electron microscopy

A real-space structure refinement method, originally developed for macromolecular X-ray crystallography, has been applied to protein structure analysis by electron microscopy (EM). This method simultaneously optimizes the fit of an atomic model to a density map and the stereo-chemical properties of the model by minimizing an energy function. The performance of this method is characterized at different resolution and signal-to-noise ratio conditions typical for EM electron density maps. A multi-resolution scheme is devised to improve the convergence of the refinement on the global energy minimum. Applications of the method to various model systems are demonstrated here. The first case is the arrangement of FlgE molecules in the helical filament of flagellar hook, in which refinement with segmented rigid bodies improves the density correlation and reduces severe van der Waals contacts among the symmetry-related subunits. The second case is a conformational analysis of the NSF AAA ATPase in which a multi-conformer model is used in the refinement to investigate the arrangement of the two ATPase domains in the molecule. The third case is a docking simulation in which the crystal structure of actin and the NOE data from NMR experiments on the dematin headpiece are combined with a low-resolution EM density map to generate an atomic model of the F-actin-dematin headpiece structure.

Fast 3D motif search of EM density maps using a locally normalized cross-correlation function

Three-dimensional motif search is becoming increasingly important both in the search for molecular signatures within a tomographic reconstruction, at low resolution, and in the search for atomic structures within high-resolution cryo-EM maps of macromolecular complexes. The present work describes the implementation of a fast local correlation algorithm suitable for template matching in the SPIDER environment. Two examples are given, one in each of the areas of application: (i). within a 7.8A single-particle reconstruction of the Escherichia coli ribosome, four proteins and one RNA structure were located with high accuracy; (ii). within a cryo-tomogram of sarcoplasmic reticulum vesicles, ryanodine receptors were located in positions that agreed with expert knowledge.

Mixtures of wild-type and a pathogenic (E22G) form of Abeta40 in vitro accumulate protofibrils, including amyloid pores

Although APP mutations associated with inherited forms of Alzheimer's disease (AD) are relatively rare, detailed studies of these mutations may prove critical for gaining important insights into the mechanism(s) and etiology of AD. Here, we present a detailed biophysical characterization of the structural properties of protofibrils formed by the Arctic variant (E22G) of amyloid-beta protein (Abeta40(ARC)) as well as the effect of Abeta40(WT) on the distribution of the protofibrillar species formed by Abeta40(ARC) by characterizing biologically relevant mixtures of both proteins that may mimic the situation in the heterozygous patients. These studies revealed that the Arctic mutation accelerates both Abeta oligomerization and fibrillogenesis in vitro. In addition, Abeta40(ARC) was observed to affect both the morphology and the size distribution of Abeta protofibrils. Electron microscopy examination of the protofibrils formed by Abeta40(ARC) revealed several morphologies, including: (1) relatively compact spherical particles roughly 4-5 nm in diameter; (2) annular pore-like protofibrils; (3) large spherical particles 18-25 nm in diameter; and (4) short filaments with chain-like morphology. Conversion of Abeta40(ARC) protofibrils to fibrils occurred more rapidly than protofibrils formed in mixed solutions of Abeta40(WT)/Abeta40(ARC), suggesting that co-incubation of Abeta40(ARC) with Abeta40(WT) leads to kinetic stabilization of Abeta40(ARC) protofibrils. An increase in the ratio of Abeta(WT)/Abeta(MUT(Arctic)), therefore, may result in the accumulation of potential neurotoxic protofibrils and acceleration of disease progression in familial Alzheimer's disease mutation carriers.

Structure of integrin alpha5beta1 in complex with fibronectin

The membrane-distal headpiece of integrins has evolved to specifically bind large extracellular protein ligands, but the molecular architecture of the resulting complexes has not been determined. We used molecular electron microscopy to determine the three-dimensional structure of the ligand-binding headpiece of integrin alpha5beta1 complexed with fragments of its physiological ligand fibronectin. The density map for the unliganded alpha5beta1 headpiece shows a 'closed' conformation similar to that seen in the alphaVbeta3 crystal structure. By contrast, binding to fibronectin induces an 'open' conformation with a dramatic, approximately 80 degrees change in the angle of the hybrid domain of the beta subunit relative to its I-like domain. The fibronectin fragment binds to the interface between the beta-propeller and I-like domains in the integrin headpiece through the RGD-containing module 10, but direct contact of the synergy-region-containing module 9 to integrin is not evident. This finding is corroborated by kinetic analysis of real-time binding data, which shows that the synergy site greatly enhances k(on) but has little effect on the stability or k(off) of the complex.

Three-dimensional structure of bacteriophage T4 baseplate

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.

Automatic particle detection through efficient Hough transforms

Manual selection of single particles in images acquired using cryo-electron microscopy (cryoEM) will become a significant bottleneck when a very large number of images are required to achieve three-dimensional reconstructions at near atomic resolution. Investigation of fast, accurate approaches for automatic particle detection has become one of the current challenges in the cryoEM community. At the same time, the investigation is hampered by the fact that few benchmark particles or image datasets exist in the community. The unavailability of such data makes it difficult to evaluate newly developed algorithms and to leverage expertise from other disciplines. The paper presents our recent contribution to this effort. It also describes our newly developed computational framework for particle detection, through the application of edge detection and a sequence of ordered Hough transforms. Experimental results using keyhole limpet hemocyanin (KLH) as a model particle are very promising. In addition, it introduces a newly established web site, designed to support the investigation of automatic particle detection by providing an annotated image dataset of KLH available to the general scientific community.

Structure-function analysis of recombinant substrate protein 22 kDa (SP-22). A mitochondrial 2-CYS peroxiredoxin organized as a decameric toroid

Bovine mitochondrial SP-22 is a member of the peroxiredoxin family of peroxidases. It belongs to the peroxiredoxin 2-Cys subgroup containing three cysteines at positions 47, 66, and 168. The cloning and overexpression in Escherichia coli of recombinant wild type SP-22 and its three cysteine mutants (C47S, C66S, and C168S) are reported. Purified His-tagged SP-22 was fully active with Cys-47 being confirmed as the catalytic residue. The enzyme forms a stable decameric toroid consisting of five basic dimeric units containing intermolecular disulfide bonds linking the catalytically active Cys-47 of one subunit and Cys-168 of the adjacent monomer. The disulfide bonds are not required for overall structural integrity. The toroidal units have average external and internal diameters of 15 and 7 nm, respectively, and can form stacks in a lateral arrangement of two or three rings. C47S had a pronounced tendency to stack in long tubular structures containing up to 60 rings. Further unusual structural features are the presence of radial spikes projecting from the external surface and ordered electron-dense material within the central cavity of the toroid.

The axial alpha-helices and radial spokes in the core of the cryo-negatively stained complex flagellar filament of Pseudomonas rhodos: recovering high-resolution details from a flexible helical assembly

Of the two known "complex" flagellar filaments, those of Pseudomonas are far more flexible than those of Rhizobium. Their diameter is larger and their outer three-start ridges and grooves are more prominent. Although the symmetry of both complex filaments is similar, the polymer's linear mass density and the flagellin molecular mass of the latter are lower. A recent comparison of a three-dimensional reconstruction of the filament of Pseudomonas rhodos to that of Rhizobium lupini indicates that the outer flagellin domain (D3) is missing in R.lupini. Here, we concentrate on the structure of the inner core of the filament of P.rhodos using field emission cryo-negative staining electron microscopy and a hybrid helical/single particle reconstruction technique. Averaging 158 filaments caused the density band corresponding to the radial spokes to nearly average out due to their variability and inferred flexibility. Treating the Z=0 cross-sections through the aligned individual three-dimensional density maps as images, classifying them by correspondence analysis (using a mask containing the radial spokes domain) and re-averaging the subclasses (using helical reconstruction techniques) allowed a recovery of the radial spokes and resolved the alpha-helices in domain D0 and the triple alpha-helical bundles in domain D1 at a resolution of 1/7A(-1). Although the perturbed components of the helical lattice are present along the entire filament's radius, the interior of the complex filament is similar to that of the plain one, whereas it's exterior is altered. Reconstructions of vitrified and cryo-negatively stained plain, right-handed filaments of Salmonella typhimurium SJW1655 prepared and imaged under conditions identical with those used for P.rhodos confirm the similarity of their inner cores and that the secondary structures in the interior of the flagellar filament can, under critical conditions of image recording and correction, be resolved in negative stain.

The structure of the receptor-binding domain of the bacteriophage T4 short tail fibre reveals a knitted trimeric metal-binding fold

Adsorption of T4 bacteriophage to the Escherichia coli host cell is mediated by six long and six short tail fibres. After at least three long tail fibres have bound, short tail fibres extend and bind irreversibly to the core region of the host cell lipo-polysaccharide (LPS), serving as inextensible stays during penetration of the cell envelope by the tail tube. The short tail fibres consist of a parallel, in-register, trimer of gene product 12 (gp12).X-ray crystallography at 1.5A resolution of a protease-stable fragment of gp12 generated in the presence of zinc chloride reveals the structure of the C-terminal receptor-binding domain. It has a novel "knitted" fold, consisting of three extensively intertwined monomers. It reveals a metal-binding site, containing a zinc ion coordinated by six histidine residues in an octahedral conformation. We also suggest an LPS-binding region.

CynD, the cyanide dihydratase from Bacillus pumilus: gene cloning and structural studies

The cyanide dihydratase in Bacillus pumilus was shown to be an 18-subunit spiral structure by three-dimensional reconstruction of electron micrographs of negatively stained material at its optimum pH, 8.0. At pH 5.4, the subunits rearrange to form an extended left-handed helix. Gel electrophoresis of glutaraldehyde cross-linked enzyme suggests that the fundamental component of the spiral is a dimer of the 37-kDa subunit. The gene was cloned, and the recombinant enzyme was readily expressed at high levels in Escherichia coli. Purification of the recombinant enzyme was facilitated by the addition of a C-terminal six-histidine affinity purification tag. The tagged recombinant enzyme has K(m) and V(max) values similar to those published for the native enzyme. This is the first cyanide dihydratase from a gram-positive bacterium to be sequenced, and it is the first description of the structure of any member of this enzyme class. The putative amino acid sequence shares over 80% identity to the only other sequenced cyanide dihydratase, that of the gram-negative Pseudomonas stutzeri strain AK61, and is similar to a number of other bacterial and fungal nitrilases. This sequence similarity suggests that the novel short spiral structure may be typical of these enzymes. In addition, an active cyanide dihydratase from a non-cyanide-degrading isolate of B. pumilus (strain 8A3) was cloned and expressed. This suggests that cynD, the gene coding for the cyanide dihydratase, is not unique to the C1 strain of B. pumilus and is not a reflection of its origin at a mining waste site.

Oligomerization and polymerization of the filovirus matrix protein VP40

The matrix protein VP40 from Ebola virus plays an important role in the assembly process of virus particles by interacting with cellular factors, cellular membranes, and the ribonuclearprotein particle complex. Here we show that the N-terminal domain of VP40 folds into a mixture of two different oligomeric states in vitro, namely hexameric and octameric ringlike structures, as detected by gel filtration chromatography, chemical cross-linking, and electron microscopy. Octamer formation depends largely on the interaction with nucleic acids, which in turn confers in vitro SDS resistance. Refolding experiments with a nucleic acid free N-terminal domain preparation reveal a mostly dimeric form of VP40, which is transformed into an SDS resistant octamer upon incubation with E. coli nucleic acids. In addition, we demonstrate that the N-terminal domain of Marburg virus VP40 also folds into ringlike structures, similar to Ebola virus VP40. Interestingly, Marburg virus VP40 rings reveal a high tendency to polymerize into rods composed of stacked rings. These results may suggest distinct roles for different oligomeric forms of VP40 in the filovirus life cycle.

Type III protein translocase: HrcN is a peripheral ATPase that is activated by oligomerization

Type III protein secretion (TTS) is catalyzed by translocases that span both membranes of Gram-negative bacteria. A hydrophilic TTS component homologous to F1/V1-ATPases is ubiquitous and essential for secretion. We show that hrcN encodes the putative TTS ATPase of Pseudomonas syringae pathovar phaseolicola and that HrcN is a peripheral protein that assembles in clusters at the membrane. A decahistidinyl HrcN derivative was overexpressed in Escherichia coli and purified to homogeneity in a folded state. Hydrodynamic analysis, cross-linking, and electron microscopy revealed four distinct HrcN forms: I, 48 kDa (monomer); II, approximately 300 kDa (putative hexamer); III, 575 kDa (dodecamer); and IV, approximately 3.5 MDa. Form III is the predominant form of HrcN at the membrane, and its ATPase activity is dramatically stimulated (>700-fold) over the basal activity of Form I. We propose that TTS ATPases catalyze protein translocation as activated homo-oligomers at the plasma membrane.

Consensus structural features of purified bacterial TatABC complexes

The twin-arginine translocation (Tat) system transports folded proteins across bacterial plasma membranes and the chloroplast thylakoid membrane. Here, we investigate the composition and structural organization of three different purified Tat complexes from Escherichia coli, Salmonella typhimurium and Agrobacterium tumefaciens. First, we demonstrate the functional activity of these Tat systems in vivo, since expression of the tatABC operons from S.typhimurium or A.tumefaciens in an E.coli tat null mutant strain resulted in efficient Tat-dependent export of an E.coli cofactor-containing substrate, TMAO reductase. The three isolated, affinity-tagged Tat complexes comprised TatA, TatB and TatC in each case, demonstrating a strong interaction between these three subunits. Single-particle electron microscopy studies of all three complexes revealed approximately oval-shaped, asymmetric particles with maximal dimensions up to 13 nm. A common feature is a number of stain-excluding densities surrounding more or less central pools of stain, suggesting protein-lined pores or cavities. The characteristics of size variation among the particles suggest a modular form of assembly and/or the recruitment of varying numbers of TatBC/TatA units. Despite low levels of sequence homology, the combined data indicate structural and functional conservation in the Tat systems of these three bacterial species.

Revisiting the structure of Alvinella pompejana hemoglobin at 20A resolution by cryoelectron microscopy

The hemoglobin of the polychaete worm Alvinella pompejana was reconstructed at 20A resolution from frozen-hydrated samples observed by electron microscopy according to the random conical tilt series method. This three-dimensional reconstruction was mirror-inverted with respect to a previous volume published by de Haas et al. in 1996. In order to explain this handedness discrepancy, various 3D reconstructions using different reference volumes were carried out showing that the choice of the first volume was the keystone during the refinement process. The 3D reconstruction volume of A. pompejana Hb presented structural features characteristic of annelid Hbs with two hexagonal layers each comprising six hollow globular subassemblies and a complex of non-heme linker chains. Moreover, the eclipsed conformation of the two hexagonal layers and a HGS architecture similar to that described for Arenicola marina Hb led to the conclusion that A. pompejana Hb belonged to the architectural type II according to the definition of Jouan et al. (2001). A comparison between this cryo-EM volume and X-ray crystallography density maps of Lumbricus terrestris type-I Hb (Royer et al., 2000) showed that the triple stranded coiled coil structures of linker chains were different. Based on this observation, a model was proposed to explain the eclipsed conformation of the two hexagonal layers of type-II Hbs.

Electron microscopy and 3D reconstructions reveal that human ATM kinase uses an arm-like domain to clamp around double-stranded DNA

The human tumor suppressor gene ataxia telangiectasia mutated (ATM) encodes a 3056 amino-acid protein kinase that regulates cell cycle checkpoints. ATM is defective in the neurodegenerative and cancer predisposition syndrome ataxia-telangiectasia. ATM protein kinase is activated by DNA damage and responds by phosphorylating downstream effectors involved in cell cycle arrest and DNA repair, such as p53, MDM2, CHEK2, BRCA1 and H2AX. ATM is probably a component of, or in close proximity to, the double-stranded DNA break-sensing machinery. We have observed purified human ATM protein, ATM-DNA and ATM-DNA-avidin bound complexes by single-particle electron microscopy and obtained three-dimensional reconstructions which show that ATM is composed of two main domains comprising a head and an arm. DNA binding to ATM induces a large conformational movement of the arm-like domain. Taken together, these three structures suggest that ATM is capable of interacting with DNA, using its arm to clamp around the double helix.

Study of the structural dynamics of the E coli 70S ribosome using real-space refinement

Cryo-EM density maps showing the 70S ribosome of E. coli in two different functional states related by a ratchet-like motion were analyzed using real-space refinement. Comparison of the two resulting atomic models shows that the ribosome changes from a compact structure to a looser one, coupled with the rearrangement of many of the proteins. Furthermore, in contrast to the unchanged inter-subunit bridges formed wholly by RNA, the bridges involving proteins undergo large conformational changes following the ratchet-like motion, suggesting an important role of ribosomal proteins in facilitating the dynamics of translation.

The C-terminal domain of the measles virus nucleoprotein is intrinsically disordered and folds upon binding to the C-terminal moiety of the phosphoprotein

The nucleoprotein of measles virus consists of an N-terminal moiety, N(CORE), resistant to proteolysis and a C-terminal moiety, N(TAIL), hypersensitive to proteolysis and not visible as a distinct domain by electron microscopy. We report the bacterial expression, purification, and characterization of measles virus N(TAIL). Using nuclear magnetic resonance, circular dichroism, gel filtration, dynamic light scattering, and small angle x-ray scattering, we show that N(TAIL) is not structured in solution. Its sequence and spectroscopic and hydrodynamic properties indicate that N(TAIL) belongs to the premolten globule subfamily within the class of intrinsically disordered proteins. The same epitopes are exposed in N(TAIL) and within the nucleoprotein, which rules out dramatic conformational changes in the isolated N(TAIL) domain compared with the full-length nucleoprotein. Most unstructured proteins undergo some degree of folding upon binding to their partners, a process termed "induced folding." We show that N(TAIL) is able to bind its physiological partner, the phosphoprotein, and that it undergoes such an unstructured-to-structured transition upon binding to the C-terminal moiety of the phosphoprotein. The presence of flexible regions at the surface of the viral nucleocapsid would enable plastic interactions with several partners, whereas the gain of structure arising from induced folding would lead to modulation of these interactions. These results contribute to the study of the emerging field of natively unfolded proteins.

Helical structure of the needle of the type III secretion system of Shigella flexneri

Gram-negative bacteria commonly interact with animal and plant hosts using type III secretion systems (TTSSs) for translocation of proteins into eukaryotic cells during infection. 10 of the 25 TTSS-encoding genes are homologous to components of the bacterial flagellar basal body, which the TTSS needle complex morphologically resembles. This indicates a common ancestry, although no TTSS sequence homologues for the genes encoding the flagellum are found. We here present an approximately 16-A structure of the central component, the needle, of the TTSS. Although the needle subunit is significantly smaller and shares no sequence homology with the flagellar hook and filament, it shares a common helical architecture ( approximately 5.6 subunits/turn, 24-A helical pitch). This common architecture implies that there will be further mechanistic analogies in the functioning of these two bacterial systems.

Structure and location of gene product 8 in the bacteriophage T4 baseplate

Many bacteriophages, such as T4, T7, RB49, and phi29, have complex, sometimes multilayered, tails that facilitate an almost 100% success rate for the viral particles to infect host cells. In bacteriophage T4, there is a baseplate, which is a multiprotein assembly, at the distal end of the contractile tail. The baseplate communicates to the tail that the phage fibers have attached to the host cell, thereby initiating the infection process. Gene product 8 (gp8), whose amino acid sequence consists of 334 residues, is one of at least 16 different structural proteins that constitute the T4 baseplate and is the sixth baseplate protein whose structure has been determined. A 2.0A resolution X-ray structure of gp8 shows that the two-domain protein forms a dimer, in which each monomer consists of a three-layered beta-sandwich with two loops, each containing an alpha-helix at the opposite sides of the sandwich. The crystals of gp8 were produced in the presence of concentrated chloride and bromide ions, resulting in at least 11 halide-binding sites per monomer. Five halide sites, situated at the N termini of alpha-helices, have a protein environment observed in other halide-containing protein crystal structures. The computer programs EMfit and SITUS were used to determine the positions of six gp8 dimers within the 12A resolution cryo-electron microscopy image reconstruction of the baseplate-tail tube complex. The gp8 dimers were found to be located in the upper part of the baseplate outer rim. About 20% of the gp8 surface is involved in contacts with other baseplate proteins, presumed to be gp6, gp7, and gp10. With the structure determination of gp8, a total of 53% of the volume of the baseplate has now been interpreted in terms of its atomic structure.

An approach to examining model dependence in EM reconstructions using cross-validation

Reference bias refers to a common problem in fitting experimental data to an initial model. Given enough free parameters, a good fit of any experimental data to the model can be obtained, even if the experimental data contain only noise. Reference-based alignment methods used in electron microscopy (EM) are subject to this type of bias, in that images containing pure noise can regenerate the reference. Cross-validation is based on the idea that the experimental data used to assess the validity of the fitting should not be the same data as were used to do the fitting. Here we present the application of cross-validation to one form of reference-based alignment: 3D-projection matching in single-particle reconstructions. Our results show that reference bias is indeed present in reconstructions, but that the effect is small for real data compared to that for random noise, and that this difference in behavior is magnified, rather than diminished, during iterative refinement.

Mammalian Mcm2/4/6/7 complex forms a toroidal structure

BACKGROUND

The Mcm proteins are a family of six homologous proteins (Mcm2-7) that play an important role in DNA replication. They form Mcm4/6/7 and Mcm2/4/6/7 complexes, but their structures are not known.

RESULTS

We found that the human Mcm2/4/6/7 tetramer forms a toroidal structure, with a central cavity about 3-4 nm in diameter. Observations were made using electron microscopy, employing the image analysis of single particles. The most predominant averaged image displayed a toroid harbouring four bulges forming corners, one of which was larger than the others. This structure was very similar to the mouse Mcm2/4/6/7 tetramer that was independently prepared and analysed by electron microscopy. These toroidal structures are distinct from that of the Mcm4/6/7 hexamer, which was also examined by electron microscopy. GST(glutathione S-transferase)-pull down and two hybrid experiments suggest that a putative Mcm6-Mcm6 hinge contributes to the formation of the Mcm7/4/6/6/4/7 heterohexamer.

CONCLUSIONS

The Mcm2/4/6/7 tetramer forms a toroidal structure that is distinct from that of the Mcm4/6/7 hexamer in size and shape.

Three-dimensional reconstruction of the Saccharomyces cerevisiae multidrug resistance protein Pdr5p

Pdr5p, the major multidrug exporter in Saccharomyces cerevisiae, is a member of the ATP-binding cassette (ABC) superfamily. Pdr5p shares similar mechanisms of substrate recognition and transport with the human MDR1-Pgp, despite an inverted topology of transmembrane and ATP-binding domains. The hexahistidine-tagged Pdr5p multidrug transporter was highly overexpressed in yeast strains where other ABC genes have been deleted. After solubilization and purification, the 160-kDa recombinant Pdr5p has been reconstituted into a lipid bilayer. Controlled detergent removal from Pdr5p-lipid-detergent micelles allowed the production of peculiar square-shaped particles coexisting with liposomes and proteoliposomes. These particles having 11 nm in side were well suited for single particle analysis by electron microscopy. From such analysis, a computed volume has been determined at 25-A resolution, giving insight into the structural organization of Pdr5p. Comparison with the reported structures of different bacterial ABC transporters was consistent with a dimeric organization of Pdr5p in the square particles. Each monomer was composed of three subregions corresponding to a membrane region of about 50 A in height that joins two well separated protruding stalks of about 40 A in height, ending each one with a cytoplasmic nucleotide-binding domain (NBD) lobe of about 50-60 A in diameter. The three-dimensional reconstruction of Pdr5p revealed a close arrangement and a structural asymmetric organization of the two NBDs that appeared oriented perpendicularly within a monomer. The existence of different angular positions of the NBDs, with respect to the stalks, suggest rotational movements during the catalytic cycle.

Structural organization of authentic, mature HIV-1 virions and cores

Mature, infectious HIV-1 particles contain a characteristic cone-shaped core that encases the viral RNA and replication proteins. The architectures of mature virions and isolated cores were studied using cryo-electron microscopy. The average size ( approximately 145 nm) of the virion was unchanged during maturation. Most virions contained a single core but roughly one-third contained two or more cores. Consideration of the capsid protein concentration during core assembly indicated that core formation in vivo is template-mediated rather than concentration-driven. Although most cores were conical, 7% were tubular. These displayed a stacked-disc arrangement with 7-, 8-, 9- or 10-fold axial symmetry. Layer line filtration of these images showed that the capsid subunit arrangement is consistent with a 9.6 nm hexamer resembling that previously seen in the helical tubes assembled from purified capsid protein. A common reflection (1/3.2 nm) shared between the tubular and conical cores suggested they share a similar organization. The extraordinary flexibility observed in the assembly of the mature core appears to be well suited to accommodating variation and hence there may be no single structure for the infectious virion.

Ring-like pore structures of SecA: implication for bacterial protein-conducting channels

SecA, an essential component of the general protein secretion pathway of bacteria, is present in Escherichia coli as soluble and membrane-integral forms. Here we show by electron microscopy that SecA assumes two characteristic forms in the presence of phospholipid monolayers: dumbbell-shaped elongated structures and ring-like pore structures. The ring-like pore structures with diameters of 8 nm and holes of 2 nm are found only in the presence of anionic phospholipids. These ring-like pore structures with larger 3- to 6-nm holes (without staining) were also observed by atomic force microscopic examination. They do not form in solution or in the presence of uncharged phosphatidylcholine. These ring-like phospholipid-induced pore-structures may form the core of bacterial protein-conducting channels through bacterial membranes.

Three-dimensional structure of the Neisseria meningitidis secretin PilQ determined from negative-stain transmission electron microscopy

The PilQ secretin from the pathogenic bacterium Neisseria meningitidis is an integral outer membrane protein complex which plays a crucial role in the biogenesis of type IV pili. We present here the first three-dimensional structure of this type of secretin at 2.5-nm resolution, obtained by single-particle averaging methods applied to the purified protein complex visualized in a negative stain. In projection, the PilQ complex is circular, with a donut-like appearance. When viewed from the side it has a rounded, conical profile. The complex was demonstrated to have 12-fold rotational symmetry, and this property was used to improve the quality of the density map by symmetry averaging. The dominant feature of the structure is a cavity, 10 nm deep, within the center of the molecule. The cavity is funnel-shaped in cross section, measures 6.5 nm in diameter at the top of the complex, and tapers to a closed point, effectively blocking formation of a continuous pore through the PilQ complex. These results suggest that the complex would have to undergo a conformational change in order to accommodate an assembled pilus fiber of diameter 6.5 nm running through the outer membrane.