Determination of the ribosome-binding sequence and spacer length between binding site and initiation codon for efficient protein expression in Bifidobacterium longum 105-A

The frequency of the ribosome-binding site (RBS) and spacer length between binding site and initiation codon were analyzed using informatics, and compared the activities of various synthetic RBSs and spacers in Bifidobacterium longum 105-A. As the result, AAGGAG and a 5 nt spacer length produced the most efficient protein expression.

Structural‐Electrical‐Coupled Formulation for the Free Vibration of a Piezoelectric‐Laminated Plate Using the Analytical Arbitrary Quadrilateral p Element

An analytical quadrilateral p element is developed for solving the free vibrations of piezoelectric‐laminated plates. The formulations of the displacement and strain fields are based on first‐order shear deformation plate theory. The coupling effect between the electrical and stress fields is also considered. The Legendre orthogonal polynomials are used as the element interpolation functions, and the analytical integration technique is adopted. It is found that the present p element method gives high numerical precision results, fast and monotonic convergence rate. In the numerical cases, the effects of the number of hierarchical terms and mesh size on the convergence rate are investigated. Examples of square plates with different displacement and potential boundary conditions are studied. In the comparisons, the solutions of the present element are in good agreement with those obtained from other classical and finite element methods.

Numerical Simulation for General Rosenau‐RLW Equation: AnAverage Linearized Conservative Scheme

Numerical solutions for the general Rosenau‐RLW equation are considered and an energy conservative linearized finite difference scheme is proposed. Existence of the solutions for the difference scheme has been shown. Stability, convergence, and a priori error estimate of the scheme are proved using energy method. Numerical results demonstrate that the scheme is efficient and reliable.

Apoptotic signaling in mouse odontogenesis

Apoptosis is an important morphogenetic event in embryogenesis as well as during postnatal life. In the last 2 decades, apoptosis in tooth development (odontogenesis) has been investigated with gradually increasing focus on the mechanisms and signaling pathways involved. The molecular machinery responsible for apoptosis exhibits a high degree of conservation but also organ and tissue specific patterns. This review aims to discuss recent knowledge about apoptotic signaling networks during odontogenesis, concentrating on the mouse, which is often used as a model organism for human dentistry. Apoptosis accompanies the entire development of the tooth and corresponding remodeling of the surrounding bony tissue. It is most evident in its role in the elimination of signaling centers within developing teeth, removal of vestigal tooth germs, and in odontoblast and ameloblast organization during tooth mineralization. Dental apoptosis is caspase dependent and proceeds via mitochondrial mediated cell death with possible amplification by Fas-FasL signaling modulated by Bcl-2 family members.

Therapeutic efficacy of Bifidobacterium longum-mediated human interleukin-2 with endostatin or TRAIL in transplanted tumors in mice

Interleukin-2 (IL-2), as an important cytokine in immune response, has been demonstrated to have therapeutic activity in several cancer models. In our previous study, we showed that the pBV22210 vector containing a chloramphenicol resistance gene and the cryptic plasmid, pMB1, from the Bifidobacterium longum (B. longum) strain could stably replicate and did not significantly affect the biological characteristics of B. longum. In this study, B. longum was transfected by electroporation with pBV22210 containing IL-2 (B. longum-pBV22210-IL-2), its growth curve was determined, and its inhibitory effect on tumor xenografts in mice was examined. The results showed that B. longum-pBV22210-IL-2 reduced the tumor size and prolonged the survival time of H22 tumor-bearing mice. In addition, when cyclophosphamide (CTX), B. longum-pBV22210-endostatin, or B. longum-pBV22210-TRAIL was combined with B. longum-pBV22210-IL-2, the antitumor effect was significantly enhanced. The survival times of the mice in the combination groups of B. longum-pBV22210-endostatin or B. longum-pBV22210-TRAIL were longer than those of the mice in the B. longum-pBV22210-IL-2 alone group. However, when CTX was added, the survival times of the mice showed no statistically significant difference compared with those of the mice in the dextrose-saline solution group. These results suggest that B. longum-pBV22210-IL-2 has potent antitumor effects that could be enhanced when combined with chemotherapeutic drugs or other antitumor genes.

Oral administration of interferon-α2b-transformed Bifidobacterium longum protects BALB/c mice against coxsackievirus B3-induced myocarditis

Multiple reports have claimed that low-dose orally administered interferon (IFN)-α is beneficial in the treatment of many infectious diseases and provides a viable alternative to high-dose intramuscular treatment. However, research is needed on how to express IFN stably in the gut. Bifidobacterium may be a suitable carrier for human gene expression and secretion in the intestinal tract for the treatment of gastrointestinal diseases. We reported previously that Bifidobacterium longum can be used as a novel oral delivery of IFN-α. IFN-transformed B. longum can exert an immunostimulatory role in mice; however the answer to whether this recombinant B. longum can be used to treat virus infection still remains elusive. Here, we investigated the efficacy of IFN-transformed B. longum administered orally on coxsackie virus B3 (CVB3)-induced myocarditis in BALB/c mice. Our data indicated that oral administration of IFN-transformed B. longum for 2 weeks after virus infection reduced significantly the severity of virus-induced myocarditis, markedly down regulated virus titers in the heart, and induced a T helper 1 cell pattern in the spleen and heart compared with controls. Oral administration of the IFN-transformed B. longum, therefore, may play a potential role in the treatment of CVB3-induced myocarditis.

Antiphospholipid antibodies and atherosclerosis: insights from rheumatoid arthritis--a five-year follow-up study

OBJECTIVES

Life expectancy in rheumatoid arthritis (RA) patients is reduced by 3-10 years, probably due to cerebrovascular and cardiovascular diseases associated with atherosclerosis. In the present study, we wanted to verify if previously reported IgA anti-beta 2-glycoprotein I (2GPI) antibodies possibly represented an independent risk factor for atherosclerosis in RA patients during a longer period of follow up.

METHODS

The follow-up study (after 5.5 years) comprised all initially included patients and controls (premenopausal women, non-diabetic, normotensive at the start of the study), except for two RA patients (one died and one not available). The same clinical, laboratory and ultrasound assessments were performed.

RESULTS

Patients and controls were divided into three categories: Intima-media thickness (IMT) progressors, plaque progressors, IMT and plaque progressors. In controls, 55% represented IMT progressors and 5% IMT and plaque progressors. No statistically significant differences were detected comparing the progressors with delta (Δ=difference between follow-up and baseline study for each group in a time span of 5.5 years) LDL cholesterol, homocysteine and IgA anti-β2GPI. In patients, there were 48.5% IMT progressors, 5.8% plaque progressors and 19.1% IMT and plaque progressors. The progression was statistically significant associated with the levels of Δ homocysteine and Δ apolipoprotein B but not with LDL cholesterol and IgA anti-β2GPI.

CONCLUSIONS

The follow-up study showed advanced atherosclerosis in RA patients compared to sex and age matched controls. However, we were not able to confirm our initial impression that IgA anti-β2GPI might represent an independent risk factor for atherosclerosis.

Animal models for investigating chronic pancreatitis

Chronic pancreatitis is defined as a continuous or recurrent inflammatory disease of the pancreas characterized by progressive and irreversible morphological changes. It typically causes pain and permanent impairment of pancreatic function. In chronic pancreatitis areas of focal necrosis are followed by perilobular and intralobular fibrosis of the parenchyma, by stone formation in the pancreatic duct, calcifications in the parenchyma as well as the formation of pseudocysts. Late in the course of the disease a progressive loss of endocrine and exocrine function occurs. Despite advances in understanding the pathogenesis no causal treatment for chronic pancreatitis is presently available. Thus, there is a need for well characterized animal models for further investigations that allow translation to the human situation. This review summarizes existing experimental models and distinguishes them according to the type of pathological stimulus used for induction of pancreatitis. There is a special focus on pancreatic duct ligation, repetitive overstimulation with caerulein and chronic alcohol feeding. Secondly, attention is drawn to genetic models that have recently been generated and which mimic features of chronic pancreatitis in man. Each technique will be supplemented with data on the pathophysiological background of the model and their limitations will be discussed.

Immunohistochemical expression of Rho GTPases in ameloblastomas

Rho GTPases are proteins that regulate cell cycle, shape, polarization, invasion, migration, and apoptosis, which are important characteristics of normal and neoplastic cells. Rho GTPases expression has been reported in normal tooth germ and several pathologies; however, it has not been evaluated in ameloblastomas. The aim of this study was to analyze the expression and distribution of RhoA, RhoB, Rac1, and Cdc42 Rho GTPases in solid and unicystic ameloblastomas. Three-micrometer sections from paraffin-embedded specimens were evaluated by using an avidin-biotin immunohistochemical method with antibodies against the proteins mentioned above. RhoA and RhoB staining was observed in a high number of cells (P < 0.05) and greater intensity in non-polarized ones. Rac1 was not observed, and Cdc42 did not show any statistical differences between the number of non-polarized and basal positive cells (P > 0.05). Upon comparing the studied ameloblastomas, a higher number of positive cells in the unicystic variant was observed than that in the solid one (P < 0,05). The results obtained suggest that these GTPases could play a role in the ameloblastoma neoplastic epithelial cell phenotype determination (polarized or non-polarized), as well as in variant (solid or unicystic) and subtype (follicular or plexiform) determination. Furthermore, they could participate in solid ameloblastoma invasion mechanisms.

Mussel-inspired chemistry for robust and surface-modifiable multilayer films

In this article, we report a bioinspired approach to preparing stable, functional multilayer films by the integration of mussel-inspired catechol oxidative chemistry into a layer-by-layer (LbL) assembly. A polyanion of poly(acrylic acid-g-dopamine) (PAA-dopamine) bearing catechol groups, a mussel adhesive protein-mimetic polymer, was synthesized as the building block for LbL assembly with poly(allylamine hydrochloride) (PAH). The oxidization of the incorporated catechol group under mild oxidative condition yields o-quinone, which exhibits high reactivity with amine and catechol, thus endowing the chemical covalence and retaining the assembled morphology of multilayer films. The cross-linked films showed excellent stability even in extremely acidic, basic, and highly concentrated aqueous salt solutions. The efficient chemical cross-linking allows for the production of intact free-standing films without using a sacrificial layer. Moreover, thiol-modified multilayer films with good stability were exploited by a combination of thiols-catechol addition and then oxidative cross-linking. The outstanding stability under harsh conditions and the facile functionalization of the PAA-dopamine/PAH multilayer films make them attractive for barriers, separation, and biomedical devices.

Controlled gene expression in bifidobacteria by use of a bile-responsive element

The promoter activity of the upstream region of the bile-inducible gene betA from Bifidobacterium longum subsp. longum NCC2705 was characterized. DNA fragments were cloned into the reporter vector pMDYAbfB, and the arabinofuranosidase activity was determined under different in vitro conditions. A segment of 469 bp was found to be the smallest operational unit that retains bile inducibility. The reporter activity was strongly affected by the presence of ox gall, cholate, and conjugated cholate, but not by other bile salts and cell-surface-acting compounds. Remarkably, this bile-inducible system was also active in other bifidobacteria containing betA homologs.

Lipoprotein(a) complexes with beta2-glycoprotein I in patients with coronary artery disease

AIM

To investigate the possible mechanisms and association of increased complexes of β(2)-glycoprotein I with lipoprotein(a) [β(2)-GPI-Lp(a)] levels with the presence and extent of coronary artery disease (CAD).

METHODS

β(2)-GPI-Lp(a) levels were measured in 116 patients with acute coronary syndromes (ACS), 72 patients with stable CAD and 100 control subjects.

RESULTS

Compared to the control, β(2)-GPI-Lp(a) levels (expressed after logarithmically transformation: ACS, 0.22±0.45 U/mL; stable CAD, 0.05±0.55 U/mL; control, -0.31±0.61 U/mL) significantly increased in both patients with ACS (p <0.001) and stable CAD (p <0.001). Univariate logistic regression analysis of risk factors revealed that the presence of β(2)-GPI-Lp(a), ox-Lp(a) or Lp(a) was a strong risk factor for stable CAD [β(2)GPI-Lp(a), OR 3.17, 95% CI 1.65, 6.07; ox-Lp(a), OR 2.54, 95% CI 1.33, 4.85; Lp(a), OR 3.00, 95% CI 1.56, 5.75; respectively], and especially for ACS [β(2)-GPI-Lp(a), OR 5.38, 95% CI 2.97, 9.74; ox-Lp(a), OR 7.55, 95% CI 4.12, 13.84; Lp(a), OR 4.33, 95% CI 2.40, 7.80; respectively]. In multivariate analysis, adjusting for age, sex and plasma lipid levels, the presence of β(2)-GPI-Lp(a) or Lp(a) was a risk factor for both stable CAD and ACS. Ox-Lp(a) was a risk factor only for ACS, while not for stable CAD. β(2)-GPI-Lp(a) levels were found to be positively associated with Lp(a), ox-Lp(a), maximal stenosis and a number of vessel diseases in patients with ACS or stable CAD, respectively. Multiple linear regression analysis found that ox-Lp(a) and maximal stenosis accounted for 46.2% of the variation in β(2)-GPI-Lp(a) levels.

CONCLUSIONS

Elevated levels of β(2)-GPI-Lp(a) are associated with the presence and severity of CAD, and may be a strong risk factor for atherosclerosis.

Bacteria as vectors for gene therapy of cancer

Anti-cancer therapy faces major challenges, particularly in terms of specificity of treatment. The ideal therapy would eradicate tumor cells selectively with minimum side effects on normal tissue. Gene or cell therapies have emerged as realistic prospects for the treatment of cancer, and involve the delivery of genetic information to a tumor to facilitate the production of therapeutic proteins. However, there is still much to be done before an efficient and safe gene medicine is achieved, primarily developing the means of targeting genes to tumors safely and efficiently. An emerging family of vectors involves bacteria of various genera. It has been shown that bacteria are naturally capable of homing to tumors when systemically administered resulting in high levels of replication locally. Furthermore, invasive species can deliver heterologous genes intra-cellularly for tumor cell expression. Here, we review the use of bacteria as vehicles for gene therapy of cancer, detailing the mechanisms of action and successes at preclinical and clinical levels.

Factors predicting occurrence and prognosis of hepatitis-B-virus-related hepatocellular carcinoma

Primary liver cancer is an important cause of cancer death, and hepatocellular carcinoma (HCC) accounts for 70%-85% of total liver cancer worldwide. Chronic hepatitis B virus (HBV) infection contributes to > 75% of HCC cases. High serum viral load is the most reliable indicator of viral replication in predicting development of HCC. HBV genotype C is closely associated with HCC in cirrhotic patients aged > 50 years, whereas genotype B is associated with development of HCC in non-cirrhotic young patients and postoperative relapse of HCC. Different HBV subgenotypes have distinct patterns of mutations, which are clearly associated with increased risk of HCC. Mutations accumulate during chronic HBV infection and predict occurrence of HCC. Chronic inflammation leads to increased frequency of viral mutation via cellular cytidine deaminase induction. Mutations are negatively selected by host immunity, whereas some immuno-escaped HBV mutants are active in hepatocarcinogenesis. Inflammatory pathways contribute to the inflammation-necrosis-regeneration process, ultimately HCC. Their hallmark molecules can predict malignancy in HBV-infected subjects. Continuing inflammation is involved in hepatocarcinogenesis and closely related to recurrence and metastasis. HBV load, genotype C, viral mutations and expression of inflammatory molecules in HBV-related HCC tissues are significantly associated with poor prognosis. Imbalance between intratumoral CD8⁺ T cells and regulatory T cells or Th1 and Th2 cytokines in peritumoral tissues can predict prognosis of HBV-related HCC. These factors are important for developing active prevention and surveillance of HBV-infected subjects who are more likely to develop HCC, or for tailoring suitable treatment to improve survival or postpone postoperative recurrence of HCC.

Antitumor effect of sFlt-1 gene therapy system mediated by Bifidobacterium Infantis on Lewis lung cancer in mice

Soluble fms-like tyrosine kinase receptor (sFlt-1) is a soluble form of extramembrane part of vascular endothelial growth factor receptor-1 (VEGFR-1) that has antitumor effects. Bifidobacterium Infantis is a kind of non-pathogenic and anaerobic bacteria that may have specific targeting property of hypoxic environment inside of solid tumors. The aim of this study was to construct Bifidobacterium Infantis-mediated sFlt-1 gene transferring system and investigate its antitumor effect on Lewis lung cancer (LLC) in mice. Our results demonstrated that the Bifidobacterium Infantis-mediated sFlt-1 gene transferring system was constructed successfully and the system could express sFlt-1 at the levels of gene and protein. This system could not only significantly inhibit growth of human umbilical vein endothelial cells induced by VEGF in vitro, but also inhibit the tumor growth and prolong survival time of LLC C57BL/6 mice safely. These data suggest that Bifidobacterium Infantis-mediated sFlt-1 gene transferring system presents a promising therapeutic approach for the treatment of cancer.

[Expression of Foxp3 and RORgamma t in peripheral blood mononuclear cells in patients with laryngeal carcinoma as indicators of tumor stage--preliminary study]

INTRODUCTION

The degree of activation of cells involved in cellular immune response against tumor antigens (cytotoxic lymphocytes Tc) as well as efficiency of the mechanisms which promote immunosuppression (Treg - regulatory cells CD4(+)CD25(+)Foxp3(+)) may determine the course of the neoplastic disease. The aim of this study was to assess the function of autologous peripheral blood mononuclear cells (PBMCs) involved in the immunological processes on the basis of expression of Foxp3 and RORgamma t molecules as well as analysis of the relationships with clinical and morphological features of the tumor (pT and pN stage, G feature, degree of invasiveness according to the TFG classification) in laryngeal carcinoma.

MATERIAL AND METHODS

The analysis included a group of 59 patients with verified squamous cell carcinoma of the larynx. In the pathologic evaluation pTNM classification criteria, depth of invasion and degree of histological differentiation were used. Expression levels of mRNA for Foxp3 and RORgamma t in peripheral blood mononuclear cells by quantitative analysis of the amplified product in real time (real-time RT(2)-PCR) were evaluated. The level of Foxp3 and RORgamma t protein expression by Western blot analysis was determined.

RESULTS

In squamous cell carcinomas of the larynx, with the highest tumor aggressiveness the significantly highest level of mRNA and protein expression for Foxp3 molecule were observed. The severity of Foxp3 expression at both gene and protein level were positively linearly correlated with the degree of local extent of the tumor (pT3-4), depth of invasion (invasion of cartilage) and the degree of histological differentiation (low-differentiated tumors G3). In the study group of laryngeal cancers significantly lower level of RORgamma t expression in carcinomas with less invasive changes (pT1-2, high-differentiated tumors G1, carcinomas with microinvasion without evidence of invasion beyond the lamina propria) was also noted.

CONCLUSIONS

The study results indicate the important role of immune cell activity as indicators of advancement of clinical and morphological changes in squamous cell carcinoma of the larynx.

Polymer assemblies for controlled delivery of bioactive molecules from surfaces

Localized delivery of bioactive compounds from surfaces of biomedical devices affords significant therapeutic benefits, and often relies on the capability of surface coatings to provide spatial and temporal control over release rate. The layer-by-layer technique presents a unique means to construct surface coatings that can conform to a variety of biomaterial surfaces and serve as matrices enabling controlled delivery of bioactive molecules from surfaces. The versatility of layer-by-layer assembly enables construction of surface coatings of diverse chemistry and internal architecture with controlled release properties. This review focuses on recent developments in constructing such layered matrices using linear polymers, polymer nanoparticles and block copolymer micelles, including micelles with stimuli-responsive cores, as film building blocks and in controlling release rate of therapeutics from these matrices via degradation, application of pH, ionic strength, temperature, light, electric field and chemical or biological stimuli. Challenges and opportunities associated with fabrication of stratified multilayer films capable of multi-stage delivery of multiple drugs are also discussed.

[Biological dental implant: myth or reality?]

The currently available options for tooth-loss are prostheses, implants, or surgery (auto-transplantation). They all have their limitations. The emergence of tissue engineering, 15 years ago, was made possible by a better knowledge of the various stages of dental development, and the mastery of stem cell differentiation. It opened a new alternative approach for tooth regeneration. Even if animal experiments have demonstrated that it was possible to obtain a biological tooth from stem cells, two major issues remain to be discussed. Is it possible to use induced pluripotent stem cells instead of embryonic stem cells, which raise an ethical problem? Is it possible to reproduce a dental crown with an adapted shape and colour? Or should we consider the simpler creation of a biological root secondarily covered by a ceramic prosthesis? Our study mentions the main landmarks and the key cells involved in the embryological development of the tooth, establishes a mapping and a list of the various types of stem cells. It details the various methods used to create a biological implant.

Dentinogenic capacity: immature root papilla stem cells versus mature root pulp stem cells

BACKGROUND INFORMATION

Immature dental papilla stem cells and mature dental pulp stem cells are capable of performing the dentinogenesis under suitable circumstances. However, a dentinogenic comparison between immature and mature dental root stem cells remains unknown.

RESULTS

iRPSCs (immature root papilla stem cells) at the root-forming stage and mRPSCs (mature root pulp stem cells) at the root-completed stage were isolated from 16-day-old and 8-week-old rat first molar roots, respectively. Growth kinetics and flow cytometry results showed that iRPSCs presented more active proliferation properties than mRPSCs. Their odontoblastic differentiation and dentinogenic potential were subsequently compared both in vitro and in vivo. iRPSCs exhibited a more potent odontoblastic differentiation than mRPSCs in vitro, as indicated by the higher levels of gene expression for dentin sialophosphoprotein and ALP (alkaline phosphatase), increased protein expression of dentin sialoprotein and runt-related transcription factor 2, decreased gene/protein expression for osterix/osteocalcin (osteogenic markers), elevated ALP activity and enhanced calcium deposition in the mineralization-inducing media. Allotransplantation results demonstrated that all iRPSCs pellets in vivo performed typical dentinogenesis, whereas mRPSCs pellets mainly produced bone-like tissues.

CONCLUSION

iRPSCs presented stronger dentinogenesis but weaker osteogenesis than did mRPSCs, suggesting that the dentinogenic competence of root mesenchymal stem cells decreases, whereas their osteogenic potential the increases following the maturation of the tooth root.

Functional tooth regeneration using a bioengineered tooth unit as a mature organ replacement regenerative therapy

Donor organ transplantation is currently an essential therapeutic approach to the replacement of a dysfunctional organ as a result of disease, injury or aging in vivo. Recent progress in the area of regenerative therapy has the potential to lead to bioengineered mature organ replacement in the future. In this proof of concept study, we here report a further development in this regard in which a bioengineered tooth unit comprising mature tooth, periodontal ligament and alveolar bone, was successfully transplanted into a properly-sized bony hole in the alveolar bone through bone integration by recipient bone remodeling in a murine transplantation model system. The bioengineered tooth unit restored enough the alveolar bone in a vertical direction into an extensive bone defect of murine lower jaw. Engrafted bioengineered tooth displayed physiological tooth functions such as mastication, periodontal ligament function for bone remodeling and responsiveness to noxious stimulations. This study thus represents a substantial advance and demonstrates the real potential for bioengineered mature organ replacement as a next generation regenerative therapy.

How matrix properties control the self-assembly and maintenance of tissues

The mechanism by which cells organize into tissues is fundamental to developmental biology and tissue engineering. Likewise, the disruption of cellular order within tissues is a hallmark of many diseases including cancer and atherosclerosis. Tissue formation is regulated, in part, by a balance between cell-cell cohesion and cell-extracellular matrix (ECM) adhesion. Here, experiments and approaches to alter this balance are discussed, and the nature of this balance in the formation of microvasculature is explored. Using matrices of tailored stiffness and matrix presentation, the role of the mechanical properties and ligand density in angiogenesis has been investigated. Decreasing cell-matrix adhesion by either reducing matrix stiffness or matrix ligand density induces the self-assembly of endothelial cells into network-like structures. These structures are stabilized by the polymerization of the extracellular matrix protein fibronectin. When fibronectin polymerization is inhibited, network formation does not occur. Interestingly, this interplay between substrate mechanics, ECM assembly, and tissue self-assembly is not limited to endothelial cells and has been observed in other cell types as well. These results suggest novel approaches to foster stable cell-cell adhesion and engineer tissues.

A 3‐node flat triangular shell element with corner drilling freedoms and transverse shear correction

The formulation, implementation and testing of simple, efficient and robust shell finite elements have challenged investigators over the past four decades. A new 3‐node flat triangular shell element is developed by combination of a membrane component and a plate bending component. The ANDES‐based membrane component includes rotational degrees of freedom, and the refined nonconforming element method‐based bending component involves a transverse shear correction. Numerical examples are carried out for benchmark tests. The results show that compared with some popular shell elements, the present one is simple but exhibits excellent all‐around properties (for both membrane‐and bending‐dominated situations), such as free of aspect ratio locking, passing the patch test, free of shear locking, good convergence and high suitability for thin to moderately thick plates. The developed element has already been adopted in a warpage simulation package for injection molding. Copyright © 2011 John Wiley & Sons, Ltd.

Tissue engineering approaches for regenerative dentistry

Although teeth can withstand enormous abrasive forces, they are susceptible to damage due to trauma, acids and bacterial attack. Conventional treatment relies on synthetic materials to fill defects and replace whole teeth, but these remain substitutes and cannot restore the tissues' physiological architecture and function. With the isolation of postnatal stem cells from various sources in the oral cavity and the development of smart materials for cell and growth factor delivery, possibilities for alternative, biology-based treatments arise. Interdisciplinary approaches are needed to move from replacement to regeneration, involving clinicians as well as biologists, stem cell researchers and material scientists. First, in order to provide an appreciation for the complexity of the tooth as a whole, its components and surrounding structures will be described. Next, the basic principles of tooth development will be presented, which can be applied to recreate signaling events and utilize them to build whole teeth. For the regeneration of individual tooth structures, the classical tissue engineering triad can be utilized, using dental stem cells, scaffold materials and relevant growth and differentiation factors. Recent successful engineering initiatives on whole teeth as well as on specific tissues such as enamel, the dentin-pulp complex or periodontal ligament will be discussed. In projecting future research directions, we conclude with a brief discussion of key components necessary to develop effective strategies for dental tissue engineering, which might enable us to implement novel regenerative strategies in clinical practice in the near future.

Targeting tumors with salmonella Typhimurium- potential for therapy

When one considers the organism Salmonella enterica serotype Typhimurium (S. Typhimurium), one usually thinks of the Gram-negative enteric pathogen that causes the severe food borne illness, gastroentertitis. In this context, the idea of Salmonella being exploited as a cancer therapeutic seems pretty remote. However, there has been an escalating interest in the development of tumor-therapeutic bacteria for use in the treatment of a variety of cancers. This strategy takes advantage of the remarkable ability of certain bacteria to preferentially replicate and accumulate within tumors. In the case of S. Typhimurium, this organism infects and selectively grows within implanted tumors, achieving tumor/normal tissue ratios of approximately 1,000:1. Salmonella also has some attractive properties well suited for the design of a chemotherapeutic agent. In particular, this pathogen can easily be manipulated to carry foreign genes, and since this species is a facultative anaerobe, it is able to survival in both oxygenated and hypoxic conditions, implying this organism could colonize both small metastatic lesions as well as larger tumors. These observations are the impetus to a burgeoning field focused on the development of Salmonella as a clinically useful anti-cancer agent. We will discuss three cutting edge technologies employing Salmonella to target tumors.

Exogenous fibroblast growth factor 8 rescues development of mouse diastemal vestigial tooth ex vivo

Regression of vestigial tooth buds results in the formation of the toothless diastema, a unique feature of the mouse dentition. Revitalization of the diastemal vestigial tooth bud provides an excellent model for studying tooth regeneration and replacement. It has been previously shown that suppression of fibroblast growth factor (FGF) signaling in the diastema results in vestigial tooth bud regression. In this study, we report that application of exogenous FGF8 to the mouse embryonic diastemal region rescues diastemal tooth development. However, this rescue of diastemal tooth development occurs only in an isolated diastemal regions and not in the mandibular quadrant, which includes the incisor and molar germs. FGF8 promotes cell proliferation and inhibits apoptosis in diastemal tooth epithelium, and revitalizes the tooth developmental program, as evidenced by the expression of genes critical for normal tooth development. Our results also support the idea that the adjacent tooth germs contribute to the suppression of diastemal vestigial tooth buds by means of multiple signals.

Pulp tissue from primary teeth: new source of stem cells

SHED (stem cells from human exfoliated deciduous teeth) represent a population of postnatal stem cells capable of extensive proliferation and multipotential differentiation. Primary teeth may be an ideal source of postnatal stem cells to regenerate tooth structures and bone, and possibly to treat neural tissue injury or degenerative diseases. SHED are highly proliferative cells derived from an accessible tissue source, and therefore hold potential for providing enough cells for clinical applications. In this review, we describe the current knowledge about dental pulp stem cells and discuss tissue engineering approaches that use SHED to replace irreversibly inflamed or necrotic pulps with a healthy and functionally competent tissue that is capable of forming new dentin.

Differential expression of signaling pathways in odontogenic differentiation of ectomesenchymal cells isolated from the first branchial arch

The aim of this study was to screen for differential expression of signaling pathways in odontogenic differentiation of ectomesenchymal cells isolated from the first branchial arch of embryonic day 10 (E10) mice by real time RT-PCR microarray. Observations of cellular morphology, immunocytochemistry, and RT-PCR were used to identify the cell source. A real time RT-PCR microarray was then used to detect the differential expression of signaling pathways in cells dissected from animals at two different developmental stages. These assays identified 25 up-regulated genes and 16 down-regulated genes involved in odontogenic differentiation of the ectomesenchymal cells of the first branchial arch. They represented the main members of Wnt, Hedgehog, TGF-β, NF-κB, and LDL signaling pathways. This study determined that these signaling pathways are important for odontogenic differentiation of ectomesenchymal cells of the first branchial arch.

Adipose tissue-derived stem cell in vitro differentiation in a three-dimensional dental bud structure

Tooth morphogenesis requires sequential and reciprocal interactions between the cranial neural crest-derived mesenchymal cells and the stomadial epithelium, which regulate tooth morphogenesis and differentiation. We show how mesenchyme-derived single stem cell populations can be induced to transdifferentiate in vitro in a structure similar to a dental bud. The presence of stem cells in the adipose tissue has been previously reported. We incubated primary cultures of human adipose tissue-derived stem cells in a dental-inducing medium and cultured the aggregates in three-dimensional conditions. Four weeks later, cells formed a three-dimensional organized structure similar to a dental bud. Expression of dental tissue-related markers was tested assaying lineage-specific mRNA and proteins by RT-PCR, immunoblot, IHC, and physical-chemical analysis. In the induction medium, cells were positive for ameloblastic and odontoblastic markers as both mRNAs and proteins. Also, cells expressed epithelial, mesenchymal, and basement membrane markers with a positional relationship similar to the physiologic dental morphogenesis. Physical-chemical analysis revealed 200-nm and 50-nm oriented hydroxyapatite crystals as displayed in vivo by enamel and dentin, respectively. In conclusion, we show that adipose tissue-derived stem cells in vitro can transdifferentiate to produce a specific three-dimensional organization and phenotype resembling a dental bud even in the absence of structural matrix or scaffold to guide the developmental process.

Increased serum levels of β₂-GPI-Lp(a) complexes and their association with premature atherosclerosis in patients with rheumatoid arthritis

BACKGROUND

Our recent study found the existence of complexes of β₂-glycoprotein I (β₂-GPI) with lipoprotein(a)[Lp(a)] in circulation and the complex concentrations were increased in sera of systemic lupus erythematosus patients. The concentration of β₂-GPI-Lp(a) and its relationship with premature atherosclerosis were evaluated in rheumatoid arthritis (RA) patients.

METHODS

Serum concentrations of β₂-GPI-Lp(a) were measured in 53 active RA patients and 40 healthy controls by a "sandwich" ELISA. β₂-GPI-ox-LDL, ox-Lp(a), ox-LDL and anti-β₂-GPI were also measured by ELISAs. In addition, inflammatory markers were examined.

RESULTS

Serum β₂-GPI-Lp(a) (1.12±0.25 U/ml vs. 0.87±0.19 U/ml, P<0.0001) and β₂-GPI-ox-LDL (1.01±0.20 U/ml vs. 0.80±0.08 U/ml, P<0.0001) concentrations in RA were both significantly higher than those of controls. Ox-Lp(a) (8.38±6.69 mg/l vs. 5.49±4.31 mg/l, P<0.05) and ox-LDL (0.68±0.65 mg/l vs. 0.37±0.13 mg/l, P=0.001) were also higher in RA than in controls. The area under the ROC curve (AUC) for β₂-GPI-Lp(a) (0.787) was larger than for ox-Lp(a) (0.731). AUC of β₂-GPI-ox-LDL (0.858) was also larger than for ox-LDL (0.785). β₂-GPI-Lp(a) and β₂-GPI-ox-LDL were positively correlated with ox-Lp(a), ox-LDL and CRP, respectively.

CONCLUSIONS

β₂-GPI-Lp(a) complex concentrations increased in active RA. Inflammation and oxidative stress in RA contribute to the increase of ox-Lp(a) and subsequently the formation of β₂-GPI-Lp(a).

Chronic pancreatitis

Chronic pancreatitis is a progressive fibroinflammatory disease that exists in large-duct (often with intraductal calculi) or small-duct form. In many patients this disease results from a complex mix of environmental (eg, alcohol, cigarettes, and occupational chemicals) and genetic factors (eg, mutation in a trypsin-controlling gene or the cystic fibrosis transmembrane conductance regulator); a few patients have hereditary or autoimmune disease. Pain in the form of recurrent attacks of pancreatitis (representing paralysis of apical exocytosis in acinar cells) or constant and disabling pain is usually the main symptom. Management of the pain is mainly empirical, involving potent analgesics, duct drainage by endoscopic or surgical means, and partial or total pancreatectomy. However, steroids rapidly reduce symptoms in patients with autoimmune pancreatitis, and micronutrient therapy to correct electrophilic stress is emerging as a promising treatment in the other patients. Steatorrhoea, diabetes, local complications, and psychosocial issues associated with the disease are additional therapeutic challenges.

A genome-wide linkage scan for quantitative trait loci influencing the craniofacial complex in humans (Homo sapiens sapiens)

The genetic architecture of the craniofacial complex has been the subject of intense scrutiny because of the high frequency of congenital malformations. Numerous animal models have been used to document the early development of the craniofacial complex, but few studies have focused directly on the genetic underpinnings of normal variation in the human craniofacial complex. This study examines 80 quantitative traits derived from lateral cephalographs of 981 participants in the Fels Longitudinal Study, Wright State University, Dayton, Ohio. Quantitative genetic analyses were conducted using the Sequential Oligogenic Linkage Analysis Routines analytic platform, a maximum-likelihood variance components method that incorporates all familial information for parameter estimation. Heritability estimates were significant and of moderate to high magnitude for all craniofacial traits. Additionally, significant quantitative trait loci (QTL) were identified for 10 traits from the three developmental components (basicranium, splanchnocranium, and neurocranium) of the craniofacial complex. These QTL were found on chromosomes 3, 6, 11, 12, and 14. This study of the genetic architecture of the craniofacial complex elucidates fundamental information of the genetic architecture of the craniofacial complex in humans.

Polyelectrolyte multilayers in tissue engineering

The layer-by-layer assembly of sequentially adsorbed, alternating polyelectrolytes has become increasingly important over the past two decades. The ease and versatility in assembling polyelectrolyte multilayers (PEMs) has resulted in numerous wide ranging applications of these materials. More recently, PEMs are being used in biological applications ranging from biomaterials, tissue engineering, regenerative medicine, and drug delivery. The ability to manipulate the chemical, physical, surface, and topographical properties of these multilayer architectures by simply changing the pH, ionic strength, thickness, and postassembly modifications render them highly suitable to probe the effects of external stimuli on cellular responsiveness. In the field of regenerative medicine, the ability to sequester growth factors and to tether peptides to PEMs has been exploited to direct the lineage of progenitor cells and to subsequently maintain a desired phenotype. Additional novel applications include the use of PEMs in the assembly of three-dimensional layered architectures and as coatings for individual cells to deliver tunable payloads of drugs or bioactive molecules. This review focuses on literature related to the modulation of chemical and physical properties of PEMs for tissue engineering applications and recent research efforts in maintaining and directing cellular phenotype in stem cell differentiation.

Routine dihydropyrimidine dehydrogenase testing for anticipating 5-fluorouracil-related severe toxicities: hype or hope?

5-Fluorouracil (5-FU) is a mainstay for treating colorectal cancer, alone or more frequently as part of combination therapies. However, its efficacy/toxicity balance is often limited by the occurrence of severe toxicities, showing in about 15%-20% of patients. Several clinical reports have shown the deleterious effect of dihydropyrimidine dehydrogenase (DPD) genetic polymorphism, a condition that reduces the liver detoxification step of standard dosages of 5-FU, in patients undergoing fluoropyrimidine-based therapy. Admittedly, DPD deficiency accounts for 50%-75% of the severe and sometimes life-threatening toxicities associated with 5-FU (or oral 5-FU). However, technical consensus on the best way to identify patients with DPD deficiency before administrating 5-FU is far from being achieved. Consequently, no regulatory step has been undertaken yet to recommend DPD testing as part of routine clinical practice for securing the administration of 5-FU. This review covers the limits and achievements of the various strategies proposed so far for determining DPD status in patients scheduled for 5-FU therapy.

Tooth engineering: searching for dental mesenchymal cells sources

The implantation of cultured re-associations between embryonic dental mesenchymal cells and epithelial cells from mouse molars at embryonic day 14 (ED14) allowed making full teeth with crown, root, periodontal ligament fibers, and bone. Although representing valuable tools to set up methodologies embryonic cells are not easily available. This work thus aimed to replace the embryonic cells by dental mesenchymal cell lines or cultured expanded embryonic cells, and to test their ability to mediate tooth development in vitro when re-associated with a competent dental epithelium. Histology, immunostaining and RT-PCR allowed getting complementary sets of results. Two different immortalized cell lines from ED18 dental mesenchyme failed in mediating tooth formation. The potentialities of embryonic dental mesenchymal cells decreased from ED14 to ED16 and were lost at ED18. This is likely related to a change in the mesenchymal cell phenotype and/or populations during development. Attempts to cultivate ED14 or ED16 embryonic dental mesenchymal cells prior to re-association led to the loss of their ability to support tooth development. This was accompanied by a down-regulation of Fgf3 transcription. Supplementation of the culture medium with FGF2 allowed restoring Fgf3 expression, but not the ability of mesenchymal cells to engage in tooth formation. Altogether, these observations suggest that a competent cell population exists in the dental mesenchyme at ED14, progressively decreases during development, and cannot as such be maintained in vitro. This study evidenced the need for specific conditions to maintain the ability of dental mesenchymal cells to initiate whole tooth formation, when re-associated with an odontogenic epithelium. Efforts to improve the culture conditions will have to be combined with attempts to characterize the competent cells within the dental mesenchyme.

Irreversible exocrine pancreatic insufficiency in alcoholic rats without chronic pancreatitis after alcohol withdrawal

BACKGROUND

Long-term alcohol consumption alone did not cause chronic pancreatitis (CP) but impaired exocrine pancreatic function. This study is to explore the reversibility of exocrine pancreatic insufficiency in the abstinent rats and its mechanism.

METHODS

Forty-eight healthy male Wistar rats were divided randomly into 4 groups: 6-month control, 6-month ethanol, 9-month control, and 9-month ethanol + withdrawal. Morphological changes of pancreatic acinar cells were observed. Pancreatic amylase and lipase were measured using an automatic biochemical analyzer. Free fatty acid (FFA) in rat intestinal chyme was measured. Cholecystokinin (CCK) levels were determined by radioimmunoassay. The expression of CCK-A receptors was quantitatively analyzed by Western blot.

RESULTS

Alcohol-induced ultramicrostructure changes of pancreatic acinar cells, including lipid droplets, myelinoid inclusion bodies, dilated rough endoplasmic reticulums, and diminished zymogen granules, were not attenuated after alcohol abstinence. The outputs of amylase and lipase, FFA content in intestinal chyme, and the intestinal and the pancreatic CCK levels in rats were reduced after chronic alcohol intake and were still lower than the control after cessation of alcohol use. Chronic ethanol intake or abstinence did not induce any change in the expression of CCK-A receptors.

CONCLUSIONS

Exocrine pancreatic insufficiency was irreversible in alcoholic rats without CP after alcohol withdrawal. It may be attributed to reduced pancreatic CCK, long-standing fatty infiltration, ultramicrostructure injuries in pancreatic acinar cells, and aging.

Cell differentiation and matrix organization in engineered teeth

Embryonic dental cells were used to check a series of criteria to be achieved for tooth engineering. Implantation of cultured cell-cell re-associations led to crown morphogenesis, epithelial histogenesis, organ vascularization, and root and periodontium development. The present work aimed to investigate the organization of predentin/dentin, enamel, and cementum which formed and mineralized after implantation. These implants were processed for histology, transmission electron microscopy, x-ray microanalysis, and electron diffraction. After two weeks of implantation, the re-associations showed gradients of differentiating odontoblasts. There were ciliated, polarized, and extended cell processes in predentin/dentin. Ameloblasts became functional. Enamel crystals showed a typical oriented arrangement in the inner and outer enamel. In the developing root, odontoblasts differentiated, cementogenesis occurred, and periodontal ligament fibroblasts interacted with the root surface and newly formed bone. The implantation of cultured dental cell re-associations allows for reproduction of complete functional differentiation at the cell, matrix, and mineral levels.

Progress in genomics, metabolism and biotechnology of bifidobacteria

Members of the genus Bifidobacterium were first described over a century ago and were quickly associated with a healthy intestinal tract due to their numerical dominance in breast-fed babies as compared to bottle-fed infants. Health benefits elicited by bifidobacteria to its host, as supported by clinical trials, have led to their wide application as probiotic components of health-promoting foods, especially in fermented dairy products. However, the relative paucity of genetic tools available for bifidobacteria has impeded development of a comprehensive molecular understanding of this genus. In this review we present a summary of current knowledge on bifidobacterial metabolism, classification, physiology and genetics and outline the currently available methods for genetically accessing and manipulating the genus.

The regulation of tooth morphogenesis is associated with epithelial cell proliferation and the expression of Sonic hedgehog through epithelial-mesenchymal interactions

Ectodermal organs, such as the tooth, salivary gland, hair, and mammary gland, develop through reciprocal epithelial-mesenchymal interactions. Tooth morphologies are defined by the crown width and tooth length (macro-morphologies), and by the number and locations of the cusp and roots (micro-morphologies). In our current study, we report that the crown width of a bioengineered molar tooth, which was reconstructed using dissociated epithelial and mesenchymal cells via an organ germ method, can be regulated by the contact area between epithelial and mesenchymal cell layers. We further show that this is associated with cell proliferation and Sonic hedgehog (Shh) expression in the inner enamel epithelium after the germ stage has formed a secondary enamel knot. We also demonstrate that the cusp number is significantly correlated with the crown width of the bioengineered tooth. These findings suggest that the tooth micro-morphology, i.e. the cusp formation, is regulated after the tooth width, or macro-morphology, is determined. These findings also suggest that the spatiotemporal patterning of cell proliferation and the Shh expression areas in the epithelium regulate the crown width and cusp formation of the developing tooth.