Self-assembly of hyperbranched polymers and its biomedical applications

Hyperbranched Macromolecules: From Synthesis to Applications

Hyperbranched macromolecules (HMs, also called hyperbranched polymers) are highly branched three-dimensional (3D) structures in which all bonds converge to a focal point or core, and which have a multiplicity of reactive chain-ends. This review summarizes major types of synthetic strategies exploited to produce HMs, including the step-growth polycondensation, the self-condensing vinyl polymerization and ring opening polymerization. Compared to linear analogues, the globular and dendritic architectures of HMs endow new characteristics, such as abundant functional groups, intramolecular cavities, low viscosity, and high solubility. After discussing the general concepts, synthesis, and properties, various applications of HMs are also covered. HMs continue being materials for topical interest, and thus this review offers both concise summary for those new to the topic and for those with more experience in the field of HMs.

Hyperbranched Multiarm Copolymers with a UCST Phase Transition: Topological Effect and the Mechanism

A novel thermoresponsive hyperbranched multiarm copolymer with a hydrophobic hyperbranched poly[3-ethyl-3-(hydroxymethyl)oxetane] core and many poly(acrylamide- co-acrylonitrile) (P(AAm- co-AN)) arms was for the first time synthesized through a reversible addition-fragmentation chain-transfer polymerization. These copolymers show reversible, sharp, and controlled temperature-responsive phase transitions at the upper critical solution temperature (UCST) in water and electrolyte solution. It is the first report on the hyperbranched copolymers with a UCST transition. Two series copolymers with variable AN content (series A) and variable arm length (series B) were synthesized to study the influence of molecular structure on the UCST transition. It was found that the UCST of copolymers could be raised by increasing the AN content or decreasing the arm length. Most interestingly, the amplification effect of the hyperbranched topological structure leads to a broad change of the UCST from 33.2 to 65.2 °C with the little change of AN content (5.9%). On the basis of variable temperature nuclear magnetic resonance, dynamic light scattering, and transmission electron microscopy, a UCST transition mechanism, in combination with hydrophilic/hydrophobic balance and multimicelle aggregate (MMA), was proposed. This work enriches the UCST copolymer topology and may extend the knowledge on the structure-activity relationship as well as the mechanism of the UCST polymers.

Large-scale preparation of a 3D patchy surface with dissimilar dendritic amphiphiles

We show here the first example of the large-scale surface decoration of a macroscopic and porous monolith with dissimilar micropatches. Branched polyethylenimine (PEI) is alkylated with poly(propylene glycol) (PPG), leading to a reverse-micelle-like dendritic amphiphile of PEI@PPG. Peralkylation and partial quaternization of the residual amino groups of PEI@PPG produces a cationic dendritic amphiphile of PEI-N⁺@PPG. The two dendritic amphiphiles jointly stabilize a water-in-oil high-internal-phase emulsion to prepare open-cellular monoliths of macroscopic size, with the monolith pore surface dictated by the cationic and neutral dendritic amphiphiles. The amino groups of the neutral amphiphile are further derivatized into anionic dithiocarbamates. The resulting monolith, along with the dissimilar functional patches on the surface, simultaneously eliminates multiple anionic and cationic micropollutants from water to very low residues, and affords the pH-triggered sequential release. Our strategy of using dissimilar dendritic amphiphiles rather than block copolymers as surface building blocks can confer the resulting surface with robust and predesigned microenvironments besides the conventional coacervate structure, and thus can afford more functions.

Effect of End-Grafted Polymer Conformation on Protein Resistance

Monte Carlo simulation combined with an experimental method was used to investigate the effect of the conformational structure of polymer brushes on their protein resistance. The end-grafted polymers with two conformational structures, i.e., linear and looped, were considered. Protein adsorption behaviors on the surfaces grafted with either linear or looped polymers were investigated. Different chain lengths and grafting numbers of end-grafted polymers were employed in this simulation. The simulation results indicated that for long polymer brushes the conformational change from linear to looped generally improved their protein-resistant property for all of the grafting numbers investigated here, and a remarkable improvement in protein resistance can be achieved at a certain grafting number. Moreover, the simulations revealed that the smoothness of the surface and the formation of a dense impenetrable layer are the two significant characteristics of the looped polymer brush in resisting protein adsorption. Meanwhile, experiment results also showed that for a given chain length and grafting number the protein-resistant property of the looped polymer brush was superior to that of the surface grafted with linear polymers, which is quite consistent with the simulation results. These results further elucidated the difference in the protein-resistant property between the linear and looped polymer brushes, which provided useful information for preparing excellent antifouling materials in future experiments.

Star polymer-based unimolecular micelles and their application in bio-imaging and diagnosis

As a novel kind of polymer with covalently linked core-shell structure, star polymers behave in nanostructure in aqueous medium at all concentration range, as unimolecular micelles at high dilution condition and multi-micelle aggregates in other situations. The unique morphologies endow star polymers with excellent stability and functions, making them a promising platform for bio-application. A variety of functions including imaging and therapeutics can be achieved through rational structure design of star polymers, and the existence of plentiful end-groups on shell offers the opportunity for further modification. In the last decades, star polymers have become an attracting platform on fabrication of novel nano-systems for bio-imaging and diagnosis. Focusing on the specific topology and physicochemical properties of star polymers, we have reviewed recent development of star polymer-based unimolecular micelles and their bio-application in imaging and diagnosis. The main content of this review summarizes the synthesis of integrated architecture of star polymers and their self-assembly behavior in aqueous medium, focusing especially on the recent advances on their bio-imaging application and diagnosis use. Finally, we conclude with remarks and give some outlooks for further exploration in this field.

A Modularly Designable Vesicle for Sequentially Multiple Loading

The vesicle is one of the most intriguing platforms for drug delivery, which is believed to improve drug efficacy. In the past few decades, a great deal of materials have been explored to make vesicles, including lipids, block copolymers, dendrons, erythrocyte membranes, and even DNA. Other than shape and size control, most efforts are focused on achieving certain functions, for example, an abundance of stimuli-responsive features are introduced to vesicles, which can be applied to controllable release, such as pH, redox, light, radiation, enzyme etc. Besides, crosslinking or pegylation is used to increase vesicles' stability and elongate circulation time. By incorporating affinity ligands, vesicles can further accumulate to diseased cells or tissues to achieve targeting properties. Recently, multidrug delivery is believed to show a synergy effect in cancer therapy and has become a new direction in this field. However, coloading hydrophilic-hydrophobic small molecules, oligonucleotides, and peptides in the same size- and shape-controlled vesicle through a stepwise manner with high efficiency is still challenging. Herein, a modularly designable vesicle is reported for sequential multiple loading based on frame-guided assembly, which is believed to be an outstanding platform for drug delivery in the future.

Fabrication of POSS-embedded supramolecular hyperbranched polymers with multi-responsive morphology transitions

We demonstrate a simple approach to prepare POSS-embedded supramolecular hyperbranched polymers with multiple stimulus morphology transitions driven by triple supramolecular driving forces in selective solvents.

All-in-one hyperbranched polypeptides for surgical adhesives and interventional embolization of tumors

A series of hyperbranched, thermo-responsive and mussel-inspired polypeptides were synthesized and used for surgical adhesion, hemostasis and interventional embolization.

Synthesis and peptide functionalization of hyperbranched poly(arylene oxindole) towards versatile biomaterials

An azide derivative of hyperbranched poly(arylene oxindole) is synthesized for postgrafting by CuAAC. RGDS functionalization promotes cell attachment and proliferation.

Fabrication of supramolecular hyperbranched polyamidoamine–dextran conjugates and their self-assembly in the presence of EGCG

A supramolecular hyperbranched conjugate, HPAM–Dex, was prepared and it could self-assemble into size-controllable micelles in the presence of EGCG.

Photo-responsive camptothecin-based polymeric prodrug coated silver nanoparticles for drug release behaviour tracking via the nanomaterial surface energy transfer (NSET) effect

A photo-responsive hybrid drug delivery system for drug release behaviour tracking via the nanomaterial surface energy transfer (NSET) effect.

Design and Biomedical Applications of Poly(amidoamine)‐Dendrimer‐Based Hybrid Nanoarchitectures

Dendrimers, especially poly(amidoamine) (PAMAM) dendrimers, possess unique properties such as 3D architecture, monodispersity, highly branched macromolecular characteristics, and tunable terminal functionalities. These properties allow them to be used for controlled synthesis and assembly of hybrid nanoarchitectures with a range of properties suitable for biomedical applications. Here, the recent advances in the design of different PAMAM‐dendrimer‐based hybrid nanoarchitectures for various biomedical applications, in particular for molecular imaging, nonviral gene delivery, and theranostics, are summarized and discussed; future perspectives are also briefly illustrated.

An inverted supramolecular amphiphile and its step-wise self-assembly into vesicular networks

A host-guest interaction between a multi-cationic dendrimer 1 functionalized with 16 guanidiniocarbonyl pyrrole (GCP) groups on its surface and naphthalene diimide dicarboxylic acid (NDIDC) in a 1 : 8 ratio leads to the formation of a new type of inverted amphiphile. This amphiphile further self-assembles in a step-wise manner first into reverse micelles and then into reverse vesicles, which adhere to form an extensive 3D network several micrometers in length. Self-assembly is based on the aromatic stacking interactions of the surface-bound NDIDC. Furthermore, these aggregates only form at neutral pH but not in acidic or basic solutions in which no ion pairing between 1 and NDIDC is possible. The step-wise self-assembly process of the inverted amphiphile which follows a theoretical prediction recently proposed for hyperbranched polymers was studied and visualized in detail using atomic force microscopy (AFM) and transmission electron microscopy (TEM).

Supramolecular assembly affording a ratiometric two-photon fluorescent nanoprobe for quantitative detection and bioimaging

Fluorescence quantitative analyses for vital biomolecules are in great demand in biomedical science owing to their unique detection advantages with rapid, sensitive, non-damaging and specific identification. However, available fluorescence strategies for quantitative detection are usually hard to design and achieve. Inspired by supramolecular chemistry, a two-photon-excited fluorescent supramolecular nanoplatform (TPSNP) was designed for quantitative analysis with three parts: host molecules (β-CD polymers), a guest fluorophore of sensing probes (Np-Ad) and a guest internal reference (NpRh-Ad). In this strategy, the TPSNP possesses the merits of (i) improved water-solubility and biocompatibility; (ii) increased tissue penetration depth for bioimaging by two-photon excitation; (iii) quantitative and tunable assembly of functional guest molecules to obtain optimized detection conditions; (iv) a common approach to avoid the limitation of complicated design by adjustment of sensing probes; and (v) accurate quantitative analysis by virtue of reference molecules. As a proof-of-concept, we utilized the two-photon fluorescent probe NHS-Ad-based TPSNP-1 to realize accurate quantitative analysis of hydrogen sulfide (H₂S), with high sensitivity and good selectivity in live cells, deep tissues and ex vivo-dissected organs, suggesting that the TPSNP is an ideal quantitative indicator for clinical samples. What's more, TPSNP will pave the way for designing and preparing advanced supramolecular sensors for biosensing and biomedicine.

Self-Assembly of Human Serum Albumin: A Simplex Phenomenon

Spontaneous self-assemblies of biomolecules can generate geometrical patterns. Our findings provide an insight into the mechanism of self-assembled ring pattern generation by human serum albumin (HSA). The self-assembly is a process guided by kinetic and thermodynamic parameters. The generated protein ring patterns display a behavior which is geometrically related to a n-simplex model and is explained through thermodynamics and chemical kinetics.

A dissipative particle dynamics simulation study on phase diagrams for the self-assembly of amphiphilic hyperbranched multiarm copolymers in various solvents

Self-assembly of amphiphilic hyperbranched multiarm copolymers (HMCs) has shown great potential for preparing all kinds of delicate supramolecular structures in all scales and dimensions in solution. However, theoretical studies on the influencing factors for the self-assembly of HMCs have been greatly lagging behind. The phase diagram of HMCs in selective solvents is very necessary but has not been disclosed up to now. Here, the self-assembly of HMCs with different hydrophilic fractions in various solvents was studied systematically by using dissipative particle dynamics (DPD) simulations. Three morphological phase diagrams are constructed and a rich variety of morphologies, ranging from spherical micelles, worm-like micelles, membranes, vesicles, vesosomes, small micellar aggregates (SMAs), and aggregates of spherical and worm-like micelles to helical micelles, are obtained. In addition, both the self-assembly mechanisms and the dynamic processes for the formation of these self-assemblies have been systematically investigated. The simulation results are consistent with available experimental observations. Besides, several novel structures, like aggregates of spherical and worm-like micelles, vesosomes and helical micelles, are firstly discovered for HMC self-assembly. We believe the current work will extend the knowledge on the self-assembly of HMCs, especially on the control of supramolecular structures and on fabricating novel self-assemblies.

Catalyst System for Hydrogenation Catalysis Based on Multiarm Hyperbranched Polymer Templated Metal (Au, Pt, Pd, Cu) Nanoparticles

With a hyperbranched poly(amidoamine) core and many water-soluble poly(ethylene glycol) monomethyl ether arms connected by pH-sensitive acylhydrazone bonds, multiarm hyperbranched polymer was used as nanoreactor and reductant to prepare metal nanoparticles endowed with intelligence and biocompatibility. The multiarm hyperbranched polymer encapsulated nanoparticles (NPs) showed excellent catalytic activity for hydrogenation, thus an excellent catalyst system for hydrogenation was established. The rate constants could reach as high as 3.48 L·s-1·m-2, which can be attributed to the lack of surface passivation afforded by the multiarm hyperbranched polymer.

Thermoresponsive and Reducible Hyperbranched Polymers Synthesized by RAFT Polymerisation

Here, we report the synthesis of new thermoresponsive hyperbranched polymers (HBPs) via one-pot reversible addition-fragmentation chain transfer (RAFT) copolymerisation of poly(ethylene glycol)methyl ether methacrylate (PEGMEMA, Mn = 475 g/mol), poly(propylene glycol)methacrylate (PPGMA, Mn = 375 g/mol), and disulfide diacrylate (DSDA) using 2-cyanoprop-2-yl dithiobenzoate as a RAFT agent. DSDA was used as the branching agent and to afford the HBPs with reducible disulfide groups. The resulting HBPs were characterised by Nuclear Magnetic Resonance Spectroscopy (NMR) and Gel Permeation Chromatography (GPC). Differential Scanning Calorimetry (DSC) was used to determine lower critical solution temperatures (LCSTs) of these copolymers, which are in the range of 17⁻57 °C. Moreover, the studies on the reducibility of HBPs and swelling behaviours of hydrogels synthesized from these HBPs were conducted. The results demonstrated that we have successfully synthesized hyperbranched polymers with desired dual responsive (thermal and reducible) and crosslinkable (via thiol-ene click chemistry) properties. In addition, these new HBPs carry the multiplicity of reactive functionalities, such as RAFT agent moieties and multivinyl functional groups, which can afford them with the capacity for further bioconjugation and structure modifications.

Synthesis and characterization of hyperbranched poly(ester-amine) by Michael addition polymerization

A series of tertiary amine-based hyperbranched poly(amine-ester)s have been synthesized by Michael addition polymerization of trifunctional monomer, TMEA and difunctional monomer, diacylates in chloroform, and the resultant polymers were subsequently treated with mercaptoethenol or 1-dodecanethiol for improving stability in storage. The caption efficiency of mercaptoethanol is much better than that of 1-dodecanthiol. Kinetic study reveals that the thiol group is consumed faster than the acrylate group when the polymerization with feed molar ratio of diacrylate/TMEA = 2/1 was carried out. At initial polymerization, monomer conversion increases fast, but the molecular weights increase slowly and sharp increase of the molecular weight occurs at the final polymerization. The hyperbranched polymers were well characterized by ¹H NMR spectra and TD-SEC, and DBs of the polymers obtained are between 0.6 and 0.82, as well as the molar ratios of diacrylate/TMEA in the hyperbranched polymers are between 1.60 and 1.82. The fluorescence efficiency and quantum yields of HypET20, HypHT24 and HypDT24 has the following sequence: HypET20 > HypHT24 > HypDT24.

High drug-loading nanomedicines: progress, current status, and prospects

Drug molecules transformed into nanoparticles or endowed with nanostructures with or without the aid of carrier materials are referred to as "nanomedicines" and can overcome some inherent drawbacks of free drugs, such as poor water solubility, high drug dosage, and short drug half-life in vivo. However, most of the existing nanomedicines possess the drawback of low drug-loading (generally less than 10%) associated with more carrier materials. For intravenous administration, the extensive use of carrier materials might cause systemic toxicity and impose an extra burden of degradation, metabolism, and excretion of the materials for patients. Therefore, on the premise of guaranteeing therapeutic effect and function, reducing or avoiding the use of carrier materials is a promising alternative approach to solve these problems. Recently, high drug-loading nanomedicines, which have a drug-loading content higher than 10%, are attracting increasing interest. According to the fabrication strategies of nanomedicines, high drug-loading nanomedicines are divided into four main classes: nanomedicines with inert porous material as carrier, nanomedicines with drug as part of carrier, carrier-free nanomedicines, and nanomedicines following niche and complex strategies. To date, most of the existing high drug-loading nanomedicines belong to the first class, and few research studies have focused on other classes. In this review, we investigate the research status of high drug-loading nanomedicines and discuss the features of their fabrication strategies and optimum proposal in detail. We also point out deficiencies and developing direction of high drug-loading nanomedicines. We envision that high drug-loading nanomedicines will occupy an important position in the field of drug-delivery systems, and hope that novel perspectives will be proposed for the development of high drug-loading nanomedicines.

Highly Branched poly(5-amino-1-pentanol-co-1,4-butanediol diacrylate) for High Performance Gene Transfection

The top-performing linear poly(β-amino ester) (LPAE), poly(5-amino-1-pentanol-co-1,4-butanediol diacrylate) (C32), has demonstrated gene transfection efficiency comparable to viral-mediated gene delivery. Herein, we report the synthesis of a series of highly branched poly(5-amino-1-pentanol-co-1,4-butanediol diacrylate) (HC32) and explore how the branching structure influences the performance of C32 in gene transfection. HC32 were synthesized by an “A2 + B3 + C2” Michal addition strategy. Gaussia luciferase (Gluciferase) and green fluorescent protein (GFP) coding plasmid DNA were used as reporter genes and the gene transfection efficiency was evaluated in human cervical cancer cell line (HeLa) and human recessive dystrophic epidermolysis bullosa keratinocyte (RDEBK) cells. We found that the optimal branching structure led to a much higher gene transfection efficiency in comparison to its linear counterpart and commercial reagents, while preserving high cell viability in both cell types. The branching strategy affected DNA binding, proton buffering capacity and degradation of polymers as well as size, zeta potential, stability, and DNA release rate of polyplexes significantly. Polymer degradation and DNA release rate played pivotal parts in achieving the high gene transfection efficiency of HC32-103 polymers, providing new insights for the development of poly(β-amino ester)s-based gene delivery vectors.

Linear and Star Poly(ionic liquid) Assemblies: Surface Monolayers and Multilayers

The surface morphology and organization of poly(ionic liquid)s (PILs), poly[1-(4-vinylbenzyl)-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] are explored in conjunction with their molecular architecture, adsorption conditions, and postassembly treatments. The formation of stable PIL Langmuir and Langmuir-Blodgett (LB) monolayers at the air-water and air-solid interfaces is demonstrated. The hydrophobic bis(trifluoromethylsulfonyl)imide (Tf₂N^-) is shown to be a critical agent governing the assembly morphology, as observed in the reversible condensation of LB monolayers into dense nanodroplets. The PIL is then incorporated as an unconventional polyelectrolyte component in the layer-by-layer (LbL) films of hydrophobic character. We demonstrate that the interplay of capillary forces, macromolecular mobility, and structural relaxation of the polymer chains influence the dewetting mechanisms in the PIL multilayers, thereby enabling access to a diverse set of highly textured, porous, and interconnected network morphologies for PIL LbL films that would otherwise be absent in conventional LbL films. Their compartmentalized internal structure is relevant to molecular separation membranes, ultrathin hydrophobic coatings, targeted cargo delivery, and highly conductive films.

Water-soluble mitochondria-targeting polymeric prodrug micelles for fluorescence monitoring and high intracellular anticancer efficiency

Based on TPP modification on the branch of mPEG, mitochondria-targeting prodrugs micelles realize better mitochondria target, high anticancer efficiency and a faster release at alkaline pH.

Fluorescent chemical probes for accurate tumor diagnosis and targeting therapy

This review focuses on small molecular ligand-targeted fluorescent imaging probes and fluorescent theranostics, including their design strategies and applications in clinical tumor treatment.

Recent progress and advances in redox-responsive polymers as controlled delivery nanoplatforms

Recent advances and progress in redox-responsive polymeric nanosystems for biomedical applications are discussed in this review article.

A novel semi-aromatic polyamide TFC reverse osmosis membrane fabricated from a dendritic molecule of trimesoylamidoamine through a two-step amine-immersion mode

In this work, a novel semi-aromatic polyamide RO membrane was fabricated from a new dendritic molecule of trimesoylamidoamine (TMAAM) combined 1,3-diamino-2-propanol (DAP) to react with trimesoyl chloride (TMC) via a new two-step amine immersion method.

Morphological Evolution of Self-Assembled Structures Induced by the Molecular Architecture of Supra-Amphiphiles

A series of telechelic supramolecular amphiphiles [POSS-Azo₈@(β-CD-PDMAEMA)_1→8] was accomplished by orthogonally coupling the multiarm host polymer β-cyclodextrin-poly(dimethylaminoethyl methacrylate) (β-CD-PDMAEMA) with an octatelechelic guest molecule azobenzene modified-polyhedral oligomeric silsesquioxanes (POSS-Azo₈) under different host-guest ratios. These telechelic supramolecular amphiphiles possess a rigid core and flexible corona. Increasing the multiarm host polymer coupled onto the rigid POSS core made the molecular architecture tend to be symmetrical and spherical. POSS-Azo₈@[β-CD-PDMAEMA]_1→8 could self-assemble into diverse morphologies evolving from spherical micelles, wormlike micelles, and branched aggregates to bowl-shaped vesicles. Distinct from the traditional linear amphiphilic polymers, we discovered that the self-assembly of POSS-Azo₈@[β-CD-PDMAEMA]_1→8 was dominantly regulated by their molecular architectures instead of hydrophilicity, which has also been verified using computer simulation results.

Chitosan-based core-shell nanomaterials for pH-triggered release of anticancer drug and near-infrared bioimaging

As a naturally-abundant biopolymer, chitosan (CS) exhibit pH-sensitive structural transformation within a narrow pH range. Integrating hydrophobic groups to CS molecules gives modified CS polymers with more adjustable pH responsiveness. In this paper, near-infrared (NIR) photoluminescent Ag₂S QDs capped by long-chain carboxylic acid were synthesized and then conjugated with CS via esterification reaction. The anticancer drug doxorubicin (DOX) has an affinity for the hydrophobic oleoyl groups and was entrapped by them to produce Ag₂S(DOX)@CS nanospheres. A variety of experiments were performed to characterize the nanospheres. In vitro and in vivo experiments showed that the nanospheres can release DOX at lowered pH in tumor cells and have high antitumor efficacy. In addition, the strong NIR signal derived from the encapsulated Ag₂S QDs makes real-time monitoring of the nanosphere distribution in a body possible. This study provides a new CS-based nanocomposite drug carrier for efficient cancer therapy.