Activity studies of eight purified cellulases: Specificity, synergism, and binding domain effects

Phenolic extraction from apple peel by cellulases from Thermobifida fusca

With the optimization of the pretreatment conditions for the crude Thermobifida fusca cellulase activity and phenolic release from apple peel, we focused on the activity of individual purified cellulase related to the antioxidant activity. The overall phenolic release was significantly increased in a synergistic manner with combined pretreatment, not with individual pretreatment such as boiling, acid, and pectinase treatment. Approximately 60 mg of reducing sugar equivalent were produced per g of apple peel by treatment with T. fusca crude extract, and up to 3 times more reducing sugars were released when the apple peel was boiled and then treated with acid and pectinase. There was good correlation between the release of phenolics and reducing sugar by cellulase treatment and also between the amount of total phenolics and antioxidant capacity by each enzyme treatment (r2> 0.95). Among the tested enzymes purified from T. fusca cell extract, cellulase activity on apple peel was the highest with cellulase 6A (Cel 6A; 43% digestion), and the highest antioxidant capacity was obtained by incubation with Cel 6B (16 mg vitamin C equiv/g). Synergism in the activity was found from the combined treatment with Cel 6A and 6B in both cellulase activity and antioxidant capacity after 20 h of incubation. Cel 9A (progressive endocellulase) exhibited greater cellulase activity and antioxidant capacity than Cel 9A cd which lacks in cellulose-binding module, indicating that the cellulose-binding domain might play important roles in cellulolysis of apple peel. This study could provide some insights into the action mechanism of various cellulases on the digestion of cellulose-containing byproducts and expand the opportunity for cellulase utilization in the extraction of functional ingredients from the plant-derived byproducts.

New effective method for analysis of the component composition of enzyme complexes from Trichoderma reesei

A method for analysis of the component composition of multienzyme complexes secreted by the filamentous fungus Trichoderma reesei was developed. The method is based on chromatofocusing followed by further identification of protein fractions according to their substrate specificity and molecular characteristics of the proteins. The method allows identifying practically all known cellulases and hemicellulases of T. reesei: endoglucanase I (EG I), EG II, EG III, cellobiohydrolase I (CBH I), CBH II, xylanase I (XYL I), XYL II, beta-xylosidase, alpha-L-arabinofuranosidase, acetyl xylan esterase, mannanase, alpha-galactosidase, xyloglucanase, polygalacturonase, and exo-beta-1,3-glucosidase. The component composition of several laboratory and commercial T. reesei preparations was studied and the content of the individual enzymes in these preparations was quantified. The influence of fermentation conditions on the component composition of secreted enzyme complexes was revealed. The characteristic features of enzyme preparations obtained in "cellulase" and "xylanase" fermentation conditions are shown.

Processive endoglucanase active in crystalline cellulose hydrolysis by the brown rot basidiomycete Gloeophyllum trabeum

Brown rot basidiomycetes have long been thought to lack the processive cellulases that release soluble sugars from crystalline cellulose. On the other hand, these fungi remove all of the cellulose, both crystalline and amorphous, from wood when they degrade it. To resolve this discrepancy, we grew Gloeophyllum trabeum on microcrystalline cellulose (Avicel) and purified the major glycosylhydrolases it produced. The most abundant extracellular enzymes in these cultures were a 42-kDa endoglucanase (Cel5A), a 39-kDa xylanase (Xyn10A), and a 28-kDa endoglucanase (Cel12A). Cel5A had significant Avicelase activity--4.5 nmol glucose equivalents released/min/mg protein. It is a processive endoglucanase, because it hydrolyzed Avicel to cellobiose as the major product while introducing only a small proportion of reducing sugars into the remaining, insoluble substrate. Therefore, since G. trabeum is already known to produce a beta-glucosidase, it is now clear that this brown rot fungus produces enzymes capable of yielding assimilable glucose from crystalline cellulose.

Toward an aggregated understanding of enzymatic hydrolysis of cellulose: noncomplexed cellulase systems

Information pertaining to enzymatic hydrolysis of cellulose by noncomplexed cellulase enzyme systems is reviewed with a particular emphasis on development of aggregated understanding incorporating substrate features in addition to concentration and multiple cellulase components. Topics considered include properties of cellulose, adsorption, cellulose hydrolysis, and quantitative models. A classification scheme is proposed for quantitative models for enzymatic hydrolysis of cellulose based on the number of solubilizing activities and substrate state variables included. We suggest that it is timely to revisit and reinvigorate functional modeling of cellulose hydrolysis, and that this would be highly beneficial if not necessary in order to bring to bear the large volume of information available on cellulase components on the primary applications that motivate interest in the subject.

Purification and properties of a low molecular weight 1,4-β-d-glucan glucohydrolase having one active site for carboxymethyl cellulose and xylan from an alkalothermophilic Thermomonospora sp

A low molecular weight 1,4-beta-D-glucan glucohydrolase from an extracellular culture filtrate of Thermomonospora sp. was purified to homogeneity. The molecular weight of the purified enzyme was 14.2 kDa by MALDI-TOF analysis and is in agreement with SDS-PAGE and gel filtration chromatography. The purified enzyme exhibited both endocarboxymethyl cellulase and endoxylanase activities. A kinetic method was employed to study the active site of the enzyme that hydrolyzes both carboxymethyl cellulose and xylan. The experimental data coincide well with the theoretical values calculated for the case of a single active site. Conformation and microenvironment at the active site was probed with fluorescent chemo-affinity labeling using o-phthalaldehyde as the chemical initiator. Formation of isoindole derivative resulted in complete inactivation of the enzyme to hydrolyze both xylan and CMC as judged by fluorescence studies corroborating a single active site for the hydrolysis of xylan and CMC.

Structural and biochemical studies of GH family 12 cellulases: improved thermal stability, and ligand complexes

In this review we will describe how we have gathered structural and biochemical information from several homologous cellulases from one class of glycoside hydrolases (GH family 12), and used this information within the framework of a protein-engineering program for the design of new variants of these enzymes. These variants have been characterized to identify some of the positions and the types of mutations in the enzymes that are responsible for some of the biochemical differences in thermal stability and activity between the homologous enzymes. In this process we have solved the three-dimensional structure of four of these homologous GH 12 cellulases: Three fungal enzymes, Humicola grisea Cel12A, Hypocrea jecorina Cel12A and Hypocrea schweinitzii Cel12A, and one bacterial, Streptomyces sp. 11AG8 Cel12A. We have also determined the three-dimensional structures of the two most stable H. jecorina Cel12A variants. In addition, four ligand-complex structures of the wild-type H. grisea Cel12A enzyme have been solved and have made it possible to characterize some of the interactions between substrate and enzyme. The structural and biochemical studies of these related GH 12 enzymes, and their variants, have provided insight on how specific residues contribute to protein thermal stability and enzyme activity. This knowledge can serve as a structural toolbox for the design of Cel12A enzymes with specific properties and features suited to existing or new applications.

Synergistic activity ofPaenibacillussp. BP-23 cellobiohydrolase Cel48C in association with the contiguous endoglucanase Cel9B and with endo- or exo-acting glucanases fromThermobifida fusca

Cellobiohydrolase Cel48C from Paenibacillus sp. BP-23, an enzyme displaying limited activity on most cellulosic substrates, was assayed for activity in the presence of other bacterial endo- or exocellulases. Significant enhanced activity was observed when Cel48C was incubated in the presence of Paenibacillus sp. BP-23 endoglucanase Cel9B or Thermobifida fusca cellulases Cel6A and Cel6B, indicating that Cel48C acts synergistically with them. Maximum synergism rates on bacterial microcrystalline cellulose or filter paper were obtained with a mixture of Paenibacillus cellulases Cel9B and Cel48C, accompanied by T. fusca exocellulase Cel6B. Synergism was also observed in cell extracts from recombinant clone E. coli pUCel9-Cel48 expressing the two contiguous Paenibacillus cellulases Cel9B and Cel48C. The enhanced cellulolytic activity displayed by the cellulase mixtures assayed could be used as an efficient tool for biotechnological applications like pulp and paper manufacturing.

Developmental expression and biochemical properties of a beta-1,4-endoglucanase family in the soybean cyst nematode, Heterodera glycines

SUMMARY The soybean cyst nematode, Heterodera glycines, produces beta-1,4-endoglucanases (cellulases) that are secreted during infection of soybean. The gene structures of three, hg-eng-4, hg-eng-5 and hg-eng-6, of the six beta-1,4-endoglucanase genes, all family 5 glycosyl hydrolases previously identified from H. glycines, are presented here. Furthermore, we present the detailed expression analyses of beta-1,4-endoglucanase genes as well as the biochemical properties of four H. glycines endoglucanase enzymes. Two of the endoglucanases, HG-ENG-5 and HG-ENG-6, differed significantly in their amino acid sequence of the catalytic domains and their gene structure from that of the other four beta-1,4-endoglucanases. Quantitative real-time RT-PCR revealed distinct developmental expression differences among the hg-eng family members during the early stages of parasitism and relatively low expression levels in late parasitic stages, with the exception of the adult male stage for some eng genes. Recombinant HG-ENGs degraded carboxymethylcellulose and optimum enzyme activity ranged from pH 5.5 for HG-ENG-5 to pH 8 for HG-ENG-6. EDTA, Ca(2+), Co(2+), Mg(2+) and Fe(2+) did not affect enzyme activity of any ENG protein, whereas Zn(2+), Cu(2+) and Mn(2+) inhibited enzyme activity from 23% to 73% in some cases. In tests with 12 different polysaccharide substrates, enzyme activity was restricted to beta-1,4 linkages with all ENG proteins tested. Only HG-ENG-5 and HG-ENG-6 had relatively high activity on xylan and slightly degraded microcrystalline cellulose. Together, these data reveal distinct differences in expression and biochemistry of cyst nematode parasitism genes and proteins, respectively, and cast light on the intricate interactions between a parasitic animal and its plant host.

Studies ofThermobifida fusca plant cell wall degrading enzymes

I have been studying the Thermobifida fusca cellulose degrading proteins for the past 25 years. In this period, we have purified and characterized the six extracellular cellulases and an intracellular beta- glucosidase used by T. fusca for cellulose degradation, cloned and sequenced the structural genes encoding these enzymes, and helped to determine the 3-dimensional structures of two of the cellulase catalytic domains. This research determined the mechanism of a novel class of cellulase, family 9 processive endoglucanases, and helped to show that there were two types of exocellulases, ones that attacked the non-reducing ends of cellulose and ones that attacked the reducing ends. It also led to the sequencing of the T. fusca genome by the DOE Joint Genome Institute. We have studied the mechanisms that regulate T. fusca cellulases and have shown that cellobiose is the inducer and that cellulase synthesis is repressed by any good carbon source. A regulatory protein (CelR) that functions in the induction control has been purified, characterized, and its structural gene cloned and expressed in E. coli. I have also carried out research on two rumen bacteria, Prevotella ruminicola and Fibrobacter succinogenes, in collaboration with Professor James Russell, helping to arrange for the genomes of these two organisms to be sequenced by TIGR, funded by a USDA grant to the North American Consortium for Genomics of Fibrolytic Ruminal Biology.

A comparative study between an endoglucanase IV and its fused protein complex Cel5-CBM6

The recombinant endoglucanase IV (Cel5; encoded by egIV) of Ruminococcus albus was compared with protein Cel5-CBM6 comprised of Cel5 fused at the C-terminus with the single-cellulose binding domain II (CBM6) of Clostridium stercorarium xylanase A, in order to improve its binding ability. Previous analyses using ball-milled cellulose had suggested that a cellulose binding domain of xylanase A could enhance cellulase activity, especially with insoluble substrates. Comparison of the catalytic activities of Cel5 and Cel5-CBM6 were determined using carboxymethylcellulose, Avicel, and filter paper as substrates. This study confirmed previous findings, and provided further evidence suggesting that Cel5-CBM6 exhibits enhanced activity with insoluble cellulose compared to native Cel5. However, its hydrolytic activity with soluble substrates such as carboxymethylcellulose was comparable to Cel5. For both cellulases, central linkages of cellulooligosaccharides (up to six glucose residues) were found to be the preferred points of cleavage. The rates of hydrolysis with both cellulases increased with cellulooligosaccharide chain length, and at least three consecutive glycosyl residues seemed to be necessary for hydrolysis to occur. Cel5-CBM6 showed a higher affinity for cellulose substrates than did Cel5, as demonstrated by transmission electron microscopy. Taken together, these results suggest that CBM6 increases the affinity of Cel5 for insoluble substrates, and this increased binding capacity seems to result in increased catalytic activity.

Cloning, expression and characterization of a family-74 xyloglucanase from Thermobifida fusca

Thermobifida fusca xyloglucan-specific endo-beta-1,4-glucanase (Xeg)74 and the Xeg74 catalytic domain (CD) were cloned, expressed in Escherichia coli, purified and characterized. This enzyme has a glycohydrolase family-74 CD that is a specific xyloglucanase followed by a family-2 carbohydrate binding module at the C terminus. The Michaelis constant (Km) and maximal rate (Vmax) values for hydrolysis of tamarind seed xyloglucan (tamXG) are 2.4 micro m and 966 micro mol xyloglucan oligosaccharides (XGOs) min-1. micro mol protein-1. More than 75% of the activity was retained after a 16-h incubation at temperatures up to 60 degrees C. The enzyme was most active at pH 6.0-9.4. NMR analysis showed that its catalytic mechanism is inverting. The oligosaccharide products from hydrolysis of tamXG were determined by MS analysis. Cel9B, an active carboxymethylcellulose (CMC)ase from T. fusca, was also found to have activity on xyloglucan (XG) at 49 micro mol.min-1. micro mol protein-1, but it could not hydrolyze XG units containing galactose. An XG/cellulose composite was prepared by growing Gluconacetobacterxylinus on glucose with tamXG in the medium. Although a mixture of purified cellulases was unable to degrade this material, the composite material was fully hydrolyzed when Xeg74 was added. T. fusca was not able to grow on tamXG, but Xeg74 was found in the culture supernatant at the same level as was found in cultures grown on Solka Floc. The function of this enzyme appears to be to break down the XG surrounding cellulose fibrils found in biomass so that T. fusca can utilize the cellulose as a carbon source.

Corn fiber hydrolysis by Thermobifida fusca extracellular enzymes

Thermobifida fusca was grown on cellulose (Solka-Floc), xylan or corn fiber and the supernatant extracellular enzymes were concentrated. SDS gels showed markedly different protein patterns for the three different carbon sources. Activity assays on a variety of synthetic and natural substrates showed major differences in the concentrated extracellular enzyme activities. These crude enzyme preparations were used to hydrolyze corn fiber, a low-value biomass byproduct of the wet milling of corn. Approximately 180 mg of reducing sugar were produced per gram of untreated corn fiber. When corn fiber was pretreated with alkaline hydrogen peroxide, up to 429 mg of reducing sugars were released per gram of corn fiber. Saccharification was enhanced by the addition of beta-glucosidase or by the addition of a crude xylanase preparation from Aureobasidium sp.

Computational and experimental studies of the catalytic mechanism of Thermobifida fusca cellulase Cel6A (E2)

Mutagenesis experiments suggest that Asp79 in cellulase Cel6A (E2) from Thermobifida fusca has a catalytic role, in spite of the fact that this residue is more than 13 A from the scissile bond in models of the enzyme-substrate complex built upon the crystal structure of the protein. This suggests that there is a substantial conformational shift in the protein upon substrate binding. Molecular mechanics simulations were used to investigate possible alternate conformations of the protein bound to a tetrasaccharide substrate, primarily involving shifts of the loop containing Asp79, and to model the role of water in the active site complex for both the native conformation and alternative low-energy conformations. Several alternative conformations of reasonable energy have been identified, including one in which the overall energy of the enzyme-substrate complex in solution is lower than that of the conformation in the crystal structure. This conformation was found to be stable in molecular dynamics simulations with a cellotetraose substrate and water. In simulations of the substrate complexed with the native protein conformation, the sugar ring in the -1 binding site was observed to make a spontaneous transition from the (4)C(1) conformation to a twist-boat conformer, consistent with generally accepted glycosidase mechanisms. Also, from these simulations Tyr73 and Arg78 were found to have important roles in the active site. Based on the results of these various MD simulations, a new catalytic mechanism is proposed. Using this mechanism, predictions about the effects of changes in Arg78 were made which were confirmed by site-directed mutagenesis.

Two new cellulosome components encoded downstream of celI in the genome of Clostridium thermocellum: the non-processive endoglucanase CelN and the possibly structural protein CseP

Clostridium thermocellum produces a great number of extracellular cellulases which are free or cellulosome-bound. The nucleotide sequence of a gene cluster containing the genes celI, celN and cseP was determined from C. thermocellum strain F7. Gene products Cel9I and Cel9N are structurally related enzymes having a glycosyl hydrolase family 9 and a carbohydrate-binding module (CBM3c), but show characteristic differences: Cel9I is a non-cellulosomal protein with an additional CBM (CBM3b), whereas Cel9N contains a cellulosomal dockerin module and no additional CBM. Although Cel9I is a processive endoglucanase, Cel9N is non-processive. Both enzymes hydrolyse phosphoric acid swollen cellulose, but the products of hydrolysis are different. The CseP protein encoded in the gene cluster is the first component attached to the cellulosomal scaffoldin for which no catalytic activity could be detected. It was shown to be present in the cellulosome. Its sequence is homologous to the spore-coat assembly protein CotH of Bacillus subtilis, suggesting a structural role of CseP in the cellulosome.

Regulation by carbon and nitrogen sources of a family of cellulases in Aspergillus nidulans

The total amount of Aspergillus nidulans secreted cellulases is affected by both the carbon and nitrogen source present in the medium, and is regulated directly and/or indirectly by the carbon metabolism regulators, CreA, CreB, and CreC, and the global nitrogen metabolism regulator, AreA. We have characterized two A. nidulans genes that encode exo-cellulases, and one gene that encodes an endo-cellulase which is additional to the previously described endo-cellulase encoding gene, eglA. The putative regulatory regions 5(') of all the genes contain potential binding sites for the global carbon and nitrogen regulatory proteins, CreA and AreA. The sequences 5(') of eglA and eglB also contain potential consensus binding sites for XlnR which is involved in induction in Aspergillus niger, but none of the 5(') sequences contains an exact copy of the AceII DNA binding consensus sequence involved in induction in Trichoderma reesei, and thus it is likely that they may be induced by different pathway specific regulatory proteins.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Mechanism of interaction between cellulase action and applied shear force, an hypothesis

An overview is given of what is known in literature concerning the structure of both cellulose and cellulase enzymes and the enzymatic degradation of cellulose. Based on this knowledge, a hypothesis is formulated about the relation between cellulase performance and required applied shear force on the fabric. In short, the specific cellulase activity is highest on the flexible amorphous cellulose when compared to that with the more rigid crystalline cellulose. When applying cellulase activity on damaged, fuzzy fabric, the connection point of cellulose material oriented away from the fiber axis, which is partly amorphous due to the damage, will be turned again to a more rigid, mainly crystalline structure. Due to this shift, this connection point will function as a primary point of application for shear force, resulting in removal of the fuzz.

Synergistic hydrolysis of carboxymethyl cellulose and acid-swollen cellulose by two endoglucanases (CelZ and CelY) from Erwinia chrysanthemi

Erwinia chrysanthemi produces a battery of hydrolases and lyases which are very effective in the maceration of plant cell walls. Although two endoglucanases (CelZ and CelY; formerly EGZ and EGY) are produced, CelZ represents approximately 95% of the total carboxymethyl cellulase activity. In this study, we have examined the effectiveness of CelY and CelZ alone and of combinations of both enzymes using carboxymethyl cellulose (CMC) and amorphous cellulose (acid-swollen cellulose) as substrates. Synergy was observed with both substrates. Maximal synergy (1.8-fold) was observed for combinations containing primarily CelZ; the ratio of enzyme activities produced was similar to those produced by cultures of E. chrysanthemi. CelY and CelZ were quite different in substrate preference. CelY was unable to hydrolyze soluble cellooligosaccharides (cellotetraose and cellopentaose) but hydrolyzed CMC to fragments averaging 10.7 glucosyl units. In contrast, CelZ readily hydrolyzed cellotetraose, cellopentaose, and amorphous cellulose to produce cellobiose and cellotriose as dominant products. CelZ hydrolyzed CMC to fragments averaging 3.6 glucosyl units. In combination, CelZ and CelY hydrolyzed CMC to products averaging 2.3 glucosyl units. Synergy did not require the simultaneous presence of both enzymes. Enzymatic modification of the substrate by CelY increased the rate and extent of hydrolysis by CelZ. Full synergy was retained by the sequential hydrolysis of CMC, provided CelY was used as the first enzyme. A general mechanism is proposed to explain the synergy between these two enzymes based primarily on differences in substrate preference.

Cloning, expression and characterization of a family 48 exocellulase, Cel48A, from Thermobifida fusca

The gene for a 104-kDa exocellulase, Cel48A, formerly E6, was cloned from Thermobifida fusca into Escherichia coli and Streptomyces lividans. The DNA sequence revealed a type II cellulose-binding domain at the N-terminus, followed by a FNIII-like domain and ending with a glycosyl hydrolase Family 48 catalytic domain. The enzyme and catalytic domain alone were each expressed in and purified from S. lividans and had very low catalytic activity on swollen cellulose, carboxymethyl cellulose, bacterial microcrystalline cellulose and filter paper. However, in synergistic assays on filter paper, the addition of Cel48A to a balanced mixture of T. fusca endocellulase and exocellulase increased the specific activity from 7.9 to 11.7 micromol cellobiose.min-1.mL-1, more than 15-fold higher than any single enzyme alone. Cel48A retained > 50% of its maximum activity from pH 5 to 9 and from 40 to 60 degrees C. Using SWISSMODEL, the amino-acid sequence of the Cel48Acd was modeled to the known structure of Clostridium cellulolyticum CelF. Family 48 enzymes are remarkably homologous at 35% identity for all their catalytic domains and some of the properties of the 10 members are discussed.

Site-directed mutation of noncatalytic residues of Thermobifida fusca exocellulase Cel6B

Fifteen mutant genes in six loop residues and eight mutant genes in five conserved noncatalytic active site residues of Thermobifida fusca Cel6B were constructed, cloned and expressed in Escherichia coli or Streptomyces lividans. The mutant enzymes were assayed for catalytic activity on carboxymethyl cellulose (CMC), swollen cellulose (SC), filter paper (FP), and bacterial microcrystalline cellulose (BMCC) as well as cellotetraose, cellopentaose, and 2, 4-dinitrophenyl-beta-D-cellobioside. They were also assayed for ligand binding, enzyme processivity, thermostability, and cellobiose feedback inhibition. Two double Cys mutations that formed disulfide bonds across two tunnel forming loops were found to significantly weaken binding to ligands, lower all activities, and processivity, demonstrating that the movement of these loops is important but not essential for Cel6B function. Two single mutant enzymes, G234S and G284P, had higher activity on SC and FP, and the double mutant enzyme had threefold and twofold higher activity on these substrates, respectively. However, synergism with endocellulase T. fusca Cel5A was not increased with these mutant enzymes. All mutant enzymes with lower activity on filter paper, BMCC, and SC had lower processivity. This trend was not true for CMC, suggesting that processivity in Cel6B is a key factor in the hydrolysis of insoluble and crystalline cellulose. Three mutations (E495D, H326A and W329C) located near putative glycosyl substrate subsites -2, +1 and +2, were found to significantly increase resistance to cellobiose feedback inhibition. Both the A229V and L230C mutations specifically decreased activity on BMCC, suggesting that BMCC hydrolysis has a different rate limiting step than the other substrates. Most of the mutant enzymes had reduced thermostability although Cel6B G234S maintained wild-type thermostability. The properties of the different mutant enzymes provide insight into the catalytic mechanism of Cel6B.

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.

Adsorption of thermomonospora fusca E(5) cellulase on silanized silica

The adsorption kinetics and dodeceyltrimethylammonium-bromide-mediated elution of Thermomonospora fusca E(5) cellulase were recorded in situ, at hydrophobic, silanized silica. Experiments were performed at different solution concentrations, ranging from 0.001 to 0.70 mg/mL. Plateau values of adsorbed mass generally increased with increasing solution concentration, with the adsorbed layer being only partially eluted by buffer. Treatment with surfactant removed more of the adsorbed enzyme in each case, with the remaining adsorbed mass varying little among experiments. Adsorption of E(5) into this nonremovable state was suggested to occur early in the adsorption process and continue until some critical surface concentration was reached. Beyond this critical value of adsorbed mass, adsorption progressed with the protein adopting more loosely bound states. Adsorption kinetic data were interpreted with reference to an adsorption mechanism allowing for irreversible adsorption into two dissimilar states. These states were distinguished by differences in occupied interfacial area, and binding strength, presumably a result of differences in structure. Comparison of the data to the kinetic model based on this mechanism showed that the fraction of adsorbed molecules present in the more tightly bound state decreased as adsorption occurred from solutions of increasing concentration. However, the absolute values of more tightly bound molecules were less dependent on adsorption conditions.

Effects of noncatalytic residue mutations on substrate specificity and ligand binding of Thermobifida fusca endocellulase cel6A

The availability of a high-resolution structure of the Thermobifida fusca endocellulase Cel6A catalytic domain makes this enzyme ideal for structure-based efforts to engineer cellulases with high activity on native cellulose. In order to determine the role of conserved, noncatalytic residues in cellulose hydrolysis, 14 mutations of six conserved residues in or near the Cel6A active-site cleft were studied for their effects on catalytic activity, substrate specificity, processivity and ligand-binding affinity. Eleven mutations were generated by site-directed mutagenesis using PCR, while three were from previous studies. All the CD spectra of the mutant enzymes were indistinguishable from that of Cel6A indicating that the mutations did not dramatically change protein conformation. Seven mutations in four residues (H159, R237, K259 and E263) increased activity on carboxymethyl cellulose (CM-cellulose), with K259H (in glucosyl subsite -2) creating the highest activity (370%). Interestingly, the other mutations in these residues reduced CM-cellulose activity. Only the K259H enzyme retained more activity on acid-swollen cellulose than on filter paper, suggesting that this mutation affected the rate-limiting step in crystalline cellulose hydrolysis. All the mutations lowered activity on cellotriose and cellotetraose, but two mutations, both in subsite +1 (H159S and N190A), had higher kcat/Km values (6.6-fold and 5.0-fold, respectively) than Cel6A on 2,4-dinitrophenyl-beta-D-cellobioside. Measurement of enzyme : ligand dissociation constants for three methylumbelliferyl oligosaccharides and cellotriose showed that all mutant enzymes bound these ligands either to the same extent as or more weakly than Cel6A. These results show that conserved noncatalytic residues can profoundly affect Cel6A activity and specificity.

A celR mutation affecting transcription of cellulase genes in Thermobifida fusca

Biosynthesis of extracellular cellulases in the cellulose-degrading actinomycete Thermobifida fusca is controlled by a transcriptional regulator, CelR, and cellobiose, which acts as an inducer interfering with the CelR-DNA interaction. We report the identification and characterization of a mutation in the celR gene that changes Ala(55) in the hinge helix of CelR to Thr. The wild-type and mutant celR genes were cloned in Escherichia coli, and their protein products were characterized. The CelR mutant protein bound DNA more weakly than the wild-type protein and formed a less stable complex with DNA in the presence of cellobiose. The results of Western analysis and gel retardation experiments suggest that CelR is produced constitutively and its DNA-binding activity is regulated through posttranslational modification.

Substrate heterogeneity causes the nonlinear kinetics of insoluble cellulose hydrolysis

Nonlinear kinetics are commonly observed in the enzymatic hydrolysis of cellulose. This nonlinearity could be explained by any or all of the following three factors: enzyme inactivation, product inhibition, or substrate heterogeneity. In this study, four different approaches were applied to test the above hypotheses using two Thermomonospora fusca endocellulases, E2 and E5. The lack of stimulation of cellulase activity by beta-glucosidase rules out the possibility of product inhibition as a cause of the observed nonlinearity. The results from the other three approaches all provide strong evidence against enzyme inactivation and strong evidence for substrate heterogeneity as the cause of the nonlinear kinetics. The most direct evidence for substrate heterogeneity is that pretreatment of swollen cellulose with either E2cd or E5cd gave a product that was hydrolyzed at a much (3- to 4-fold) slower rate than untreated swollen cellulose even though the initial treatment degraded only 15-18% of the substrate. Furthermore, the activation energy of E2 catalyzed hydrolysis of swollen cellulose increased from 10 kcal/mol for the initial rate to 29 kcal/mol for hydrolysis after 24% digestion.

Characterization and cloning of celR, a transcriptional regulator of cellulase genes from Thermomonospora fusca

CelR, a protein that regulates transcription of cellulase genes in Thermomonospora fusca (Actinomycetaceae) was purified to homogeneity. A 6-kilobase NotI-SacI fragment of T. fusca DNA containing the celR gene was cloned into Esherichia coli and sequenced. The celR gene encodes a 340-residue polypeptide that is highly homologous to members of the GalR-LacI family of bacterial transcriptional regulators. CelR specifically binds to a 14-base pair inverted repeat, which has sequence similarity to the binding sites of other family members. This site is present in regions upstream of all six cellulase genes in T. fusca. The binding of CelR to the celE promoter is inhibited specifically by low concentrations of cellobiose (0.2-0.5 mM), the major end product of cellulases. The other sugars tested did not affect binding at equivalent or 50-fold higher concentrations. The results suggest that CelR may act as a repressor, and that the mechanism of induction involves a direct interaction of CelR with cellobiose.

Purification, characterization, and molecular analysis of thermostable cellulases CelA and CelB from Thermotoga neapolitana

Two thermostable endocellulases, CelA and CelB, were purified from Thermotoga neapolitana. CelA (molecular mass, 29 kDa; pI 4.6) is optimally active at pH 6.0 at 95 degreesC, while CelB (molecular mass, 30 kDa; pI 4.1) has a broader optimal pH range (pH 6.0 to 6.6) at 106 degreesC. Both enzymes are characterized by a high level of activity (high Vmax value and low apparent Km value) with carboxymethyl cellulose; the specific activities of CelA and CelB are 1,219 and 1,536 U/mg, respectively. With p-nitrophenyl cellobioside the Vmax values of CelA and CelB are 69.2 and 18.4 U/mg, respectively, while the Km values are 0.97 and 0.3 mM, respectively. The major end products of cellulose hydrolysis, glucose and cellobiose, competitively inhibit CelA, and CelB. The Ki values for CelA are 0.44 M for glucose and 2.5 mM for cellobiose; the Ki values for CelB are 0.2 M for glucose and 1.16 mM for cellobiose. CelB preferentially cleaves larger cellooligomers, producing cellobiose as the end product; it also exhibits significant transglycosylation activity. This enzyme is highly thermostable and has half-lives of 130 min at 106 degreesC and 26 min at 110 degreesC. A single clone encoding the celA and celB genes was identified by screening a T. neapolitana genomic library in Escherichia coli. The celA gene encodes a 257-amino-acid protein, while celB encodes a 274-amino-acid protein. Both proteins belong to family 12 of the glycosyl hydrolases, and the two proteins are 60% similar to each other. Northern blots of T. neapolitana mRNA revealed that celA and celB are monocistronic messages, and both genes are inducible by cellobiose and are repressed by glucose.

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Regulation of biosynthesis of individual cellulases in Thermomonospora fusca

Regulation of the biosynthesis of the six cellulases comprising the cellulolytic system of the thermophilic soil bacterium Thermomonospora fusca ER1 was studied. The levels of the individual enzymes produced on different noninducing and inducing carbon sources were determined. The lowest level of cellulase synthesis (3 nM) was observed with xylose as a carbon source, and the highest level (247 to 1,670 nM for different enzymes) was found in cultures grown on microcrystalline cellulose. Endocellulases and exocellulases showed distinctly different regulation patterns. Differences in the regulation of individual enzymes appear to be determined by the specific structural organization of the upstream regulatory sequences of their genes.

Tryptophan 272: an essential determinant of crystalline cellulose degradation by Trichoderma reesei cellobiohydrolase Cel6A

Trichoderma reesei cellobiohydrolase Cel6A (formerly CBHII) has a tunnel shaped active site with four internal subsites for the glucose units. We have predicted an additional ring stacking interaction for a sixth glucose moiety with a tryptophan residue (W272) found on the domain surface. Mutagenesis of this residue selectively impairs the enzyme function on crystalline cellulose but not on soluble or amorphous substrates. Our data shows that W272 forms an additional subsite at the entrance of the active site tunnel and suggests it has a specialised role in crystalline cellulose degradation, possibly in guiding a glucan chain into the tunnel.

Factorial optimization of a six-cellulase mixture

A factorial experimental design approach was used to optimize mixtures of six cellulases (five Thermomonospora fusca cellulases and plus/minus Trichoderma reesei CBHI along with beta-glucosidase) so as to maximize the glucose produced from filter paper. Optimized mixture A and mixture B produced glucose at 25 and 8.3 μmol glucose/μmol enzyme/min, respectively, which are 8 and 1.5 times higher than the sum of the activity of the individual cellulases. In both mixtures, the glucose yield depended on the ratio and the cellulases used. Most enzymes showed synergistic interactions that increased the glucose yield. The yield of glucose with the optimum mixtures depended on the total enzyme concentration. Copyright 1998 John Wiley & Sons, Inc.

Roles of the catalytic domain and two cellulose binding domains of Thermomonospora fusca E4 in cellulose hydrolysis

Thermomonospora fusca E4 is an unusual 90.4-kDa endocellulase comprised of a catalytic domain (CD), an internal family IIIc cellulose binding domain (CBD), a fibronectinlike domain, and a family II CBD. Constructs containing the CD alone (E4-51), the CD plus the family IIIc CBD (E4-68), and the CD plus the fibronectinlike domain plus the family II CBD (E4-74) were made by using recombinant DNA techniques. The activities of each purified protein on bacterial microcrystalline cellulose (BMCC), filter paper, swollen cellulose, and carboxymethyl cellulose were measured. Only the whole enzyme, E4-90, could reach the target digestion of 4.5% on filter paper. Removal of the internal family IIIc CBD (E4-51 and E4-74) decreased activity markedly on every substrate. E4-74 did bind to BMCC but had almost no hydrolytic activity, while E4-68 retained 32% of the activity on BMCC even though it did not bind. A low-activity mutant of one of the catalytic bases, E4-68 (Asp55Cys), did bind to BMCC, although E4-51 (Asp55Cys) did not. The ratios of soluble to insoluble reducing sugar produced after filter paper hydrolysis by E4-90, E4-68, E4-74, and E4-51 were 6.9, 3.5, 1.3, and 0.6, respectively, indicating that the family IIIc CBD is important for E4 processivity.

High-resolution crystal structures reveal how a cellulose chain is bound in the 50 A long tunnel of cellobiohydrolase I from Trichoderma reesei

Detailed information has been obtained, by means of protein X-ray crystallography, on how a cellulose chain is bound in the cellulose-binding tunnel of cellobiohydrolase I (CBHI), the major cellulase in the hydrolysis of native, crystalline cellulose by the fungus Trichoderma reesei. Three high-resolution crystal structures of different catalytically deficient mutants of CBHI in complex with cellotetraose, cellopentaose and cellohexaose have been refined at 1.9, 1.7 and 1.9 A resolution, respectively. The observed binding of cellooligomers in the tunnel allowed unambiguous identification of ten well-defined subsites for glucosyl units that span a length of approximately 50 A. All bound oligomers have the same directionality and orientation, and the positions of the glucosyl units in each binding site agree remarkably well between the different complexes. The binding mode observed here corresponds to that expected during productive binding of a cellulose chain. The structures support the hypothesis that hydrolysis by CBHI proceeds from the reducing towards the non-reducing end of a cellulose chain, and they provide a structural explanation for the observed distribution of initial hydrolysis products.

Structure and mechanism of endo/exocellulase E4 from Thermomonospora fusca

Cellulase E4 from Thermomonospora fusca is unusual in that it has characteristics of both exo- and endo-cellulases. Here we report the crystal structure of a 68K M(r) fragment of E4 (E4-68) at 1.9 A resolution. E4-68 contains both a family 9 catalytic domain, exhibiting an (alpha/alpha)6 barrel fold, and a family III cellulose binding domain, having an antiparallel beta-sandwich fold. While neither of these folds is novel, E4-68 provides the first cellulase structure having interacting catalytic and cellulose binding domains. The complexes of E4-68 with cellopentaose, cellotriose and cellobiose reveal conformational changes associated with ligand binding and allow us to propose a catalytic mechanism for family 9 enzymes. We also provide evidence that E4 has two novel characteristics: first it combines exo- and endo-activities and second, when it functions as an exo-cellulase, it cleaves off cellotetraose units.

Surface residue mutations which change the substrate specificity of Thermomonospora fusca endoglucanase E2

The three dimensional structure of a T. fusca endoglucanase catalytic domain (E2cd) has been determined by X-ray crystallography at 1.0 A resolution (Wilson et al., 1995). The availability of a high resolution structure for E2cd allows us to initiate structure-based efforts to engineer cellulases with a high activity on native cellulose. The low activity on crystalline cellulose suggests that the entry of a cellulose molecule into the active site rather than catalysis may be the rate limiting step for hydrolysis of crystalline cellulose. Movement of a loop upon substrate binding has been proposed to play a crucial role in catalysis. A total of 15 surface mutants and 5 loop mutants were created by site-directed mutagenesis and their effects on activity and substrate specificity were determined. Circular dichroism spectra were used to monitor structural changes, and no major changes were found. The binding constants for two methyl umbelliferyl oligosaccharides and cellotriose were measured for some of the mutants and all of them showed binding similar to wild type E2. These results provide the first direct link between loop movement and catalysis by E2 and show that surface residues can affect its substrate specificity.