Three-dimensional structure of the alkaline protease of Pseudomonas aeruginosa: a two-domain protein with a calcium binding parallel beta roll motif

Sequence analysis of a non-classified, non-occluded DNA virus that causes salivary gland hypertrophy of Musca domestica, MdSGHV

The genome of the virus that causes salivary gland hypertrophy in Musca domestica (MdSGHV) was sequenced. This non-classified, enveloped, double stranded, circular DNA virus had a 124,279bp genome. The G + C content was 43.5% with 108 putative methionine-initiated open reading frames (ORFs). Thirty ORFs had homology to database proteins: eleven to proteins coded by both baculoviruses and nudiviruses (p74, pif-1, pif-2, pif-3, odv-e66, rr1, rr2, iap, dUTPase, MMP, and Ac81-like), seven to nudiviruses (mcp, dhfr, ts, tk and three unknown proteins), one to baculovirus (Ac150-like), one to herpesvirus (dna pol), and ten to cellular proteins. Mass spectrum analysis of the viral particles' protein components identified 29 structural ORFs, with only p74 and odv-e66 previously characterized as baculovirus structural proteins. Although most of the homology observed was to nudiviruses, phylogenetic analysis showed that MdSGHV was not closely related to them or to the baculoviruses.

Mycobacterial PE_PGRS proteins contain calcium-binding motifs with parallel beta-roll folds

The PE_PGRS family of proteins unique to mycobacteria is demonstrated to contain multiple calcium-binding and glycine-rich sequence motifs GGXGXD/NXUX. This sequence repeat constitutes a calcium-binding parallel β-roll or parallel β-helix structure and is found in RTX toxins secreted by many Gram-negative bacteria. It is predicted that the highly homologous PE_PGRS proteins containing multiple copies of the nona-peptide motif could fold into similar calcium-binding structures. The implication of the predicted calcium-binding property of PE_PGRS proteins in the light of macrophage-pathogen interaction and pathogenesis is presented.

A novel serralysin metalloprotease from Deinococcus radiodurans

A hypothetical protein (DR2310) from the radiation resistant organism Deinococcus radiodurans harbors highly conserved Zn+2-binding (HEXXH) domain and Met-turn (SVMSY), characteristic of the serralysin family of secreted metalloproteases from Gram negative bacteria. Deletion mutagenesis of DR2310 confirmed that the ORF is expressed in Deinococcus radiodurans as a secreted protease of 85 kDa. Biochemical analysis revealed DR2310 to be a Ca+2 and Zn+2-requiring metalloprotease. Unique features such as a long N-terminus, replacement of the highly conserved C-terminal glycine rich Ca+2-binding repeats with a single N-terminal aspartate rich eukaryotic thrombospondin type-3 Ca+2-binding repeat and absence of C-terminal secretion signals make it a novel member of serralysin family. This is the first report of a functional serralysin family metalloprotease from a Gram positive organism.

Calcium is involved in formation of high molecular weight adiponectin

BACKGROUND

Adiponectin, an adipocyte-specific secretory protein, is known to circulate as different isoforms in the blood stream.

METHODS

Using sucrose gradients and Western blotting on nondenaturing gels, adiponectin isoforms were examined in human serum, plasma, adipose tissue, and cells. The medium from human adipose tissue and human and mouse adipocytes were also examined for changes in isoform formation upon treatment with EGTA.

RESULTS

Comparison of adiponectin complexes revealed distinct differences in distribution of high molecular weight (HMW) forms between human serum and plasma, with an apparent difference in molecular weight. Variation in molecular weight suggested a probable dissociation of the HMW isoforms in the presence of EDTA in the plasma. Examination of human serum samples treated with EDTA or EGTA showed a partial dissociation of the HMW isoform, while the addition of excess calcium, but not magnesium, to human plasma resulted in partial restoration of HMW adiponectin. When human adipose tissue-secreted adiponectin was treated with EGTA, there was a decrease in the HMW isoform by 61% (+/- 1.89%) and a corresponding increase in low molecular weight (LMW) and middle molecular weight (MMW) isoforms, compared to untreated samples. Analysis of mouse and human adipocytes also showed a reduction in HMW isoforms with a corresponding increase in MMW and LMW isoforms upon treatment with EGTA. The Simpson-Golabi-Behmel syndrome (SGBS) human adipocyte cell line, which primarily synthesizes LMW isoforms, produced increasing amounts of HMW adiponectin upon treatment with calcium in a dose-dependent manner.

CONCLUSION

These data indicate that calcium promotes the formation of HMW adiponectin, and calcium sequestration decreases HMW adiponectin. Because of the importance of HMW adiponectin in insulin sensitivity, these data demonstrate the importance of assay conditions and sample preparation in the measurement of adiponectin isoforms.

Overview of protein structural and functional folds

This overview provides an illustrated, comprehensive survey of some commonly observed protein‐fold families and structural motifs, chosen for their functional significance. It opens with descriptions and definitions of the various elements of protein structure and associated terminology. Following is an introduction into web‐based structural bioinformatics that includes surveys of interactive web servers for protein fold or domain annotation, protein‐structure databases, protein‐structure‐classification databases, structural alignments of proteins, and molecular graphics programs available for personal computers. The rest of the overview describes selected families of protein folds in terms of their secondary, tertiary, and quaternary structural arrangements, including ribbon‐diagram examples, tables of representative structures with references, and brief explanations pointing out their respective biological and functional significance.

Identification and characterization of a repeat-in-toxin gene cluster in Vibrio anguillarum

Vibrio anguillarum is the causative agent of vibriosis in fish. Hemolysins of V. anguillarum have been considered virulence factors during infection. One hemolysin gene, vah1, has been previously identified but does not account for all hemolytic activity. The mini-Tn10Km mutagenesis performed with a vah1 mutant resulted in a hemolysin-negative mutant. The region surrounding the mutation was cloned and sequenced, revealing a putative rtx operon with six genes (rtxACHBDE), where rtxA encodes an exotoxin, rtxC encodes an RtxA activator, rtxH encodes a conserved hypothetical protein, and rtxBDE encode the ABC transporters. Single mutations in rtx genes did not result in a hemolysin-negative phenotype. However, strains containing a mutation in vah1 and a mutation in an rtx gene resulted in a hemolysin-negative mutant, demonstrating that the rtx operon is a second hemolysin gene cluster in V. anguillarum M93Sm. Reverse transcription-PCR analysis revealed that the rtxC and rtxA genes are cotranscribed, as are the rtxBDE genes. Additionally, Vah1 and RtxA each have cytotoxic activity against Atlantic salmon kidney (ASK) cells. Single mutations in vah1 or rtxA attenuate the cytotoxicity of V. anguillarum M93Sm. A vah1 rtxA double mutant is no longer cytotoxic. Moreover, Vah1 and RtxA each have a distinct cytotoxic effect on ASK cells, Vah1 causes cell vacuolation, and RtxA causes cell rounding. Finally, wild-type and mutant strains were tested for virulence in juvenile Atlantic salmon. Only strains containing an rtxA mutation had reduced virulence, suggesting that RtxA is a major virulence factor for V. anguillarum.

A Ca2+-dependent bacterial antifreeze protein domain has a novel β-helical ice-binding fold

AFPs (antifreeze proteins) are produced by many organisms that inhabit ice-laden environments. They facilitate survival at sub-zero temperatures by binding to, and inhibiting, the growth of ice crystals in solution. The Antarctic bacterium Marinomonas primoryensis produces an exceptionally large (>1 MDa) hyperactive Ca2+-dependent AFP. We have cloned, expressed and characterized a 322-amino-acid region of the protein where the antifreeze activity is localized that shows similarity to the RTX (repeats-in-toxin) family of proteins. The recombinant protein requires Ca2+ for structure and activity, and it is capable of depressing the freezing point of a solution in excess of 2 °C at a concentration of 0.5 mg/ml, therefore classifying it as a hyperactive AFP. We have developed a homology-guided model of the antifreeze region based partly on the Ca2+-bound β-roll from alkaline protease. The model has identified both a novel β-helical fold and an ice-binding site. The interior of the β-helix contains a single row of bound Ca2+ ions down one side of the structure and a hydrophobic core down the opposite side. The ice-binding surface consists of parallel repetitive arrays of threonine and aspartic acid/asparagine residues located down the Ca2+-bound side of the structure. The model was tested and validated by site-directed mutagenesis. It explains the Ca2+-dependency of the region, as well its hyperactive antifreeze activity. This is the first bacterial AFP to be structurally characterized and is one of only five hyperactive AFPs identified to date.

A novel structural fold in polysaccharide lyases: Bacillus subtilis family 11 rhamnogalacturonan lyase YesW with an eight-bladed beta-propeller

Rhamnogalacturonan (RG) lyase produced by plant pathogenic and saprophytic microbes plays an important role in degrading plant cell walls. An extracellular RG lyase YesW from saprophytic Bacillus subtilis is a member of polysaccharide lyase family 11 and cleaves glycoside bonds in polygalacturonan as well as RG type-I through a beta-elimination reaction. Crystal structures of YesW and its complex with galacturonan disaccharide, a reaction product analogue, were determined at 1.4 and 2.5 A resolutions with final R-factors of 16.4% and 16.6%, respectively. The enzyme is composed of an eight-bladed beta-propeller with a deep cleft in the center as a basic scaffold, and its structural fold has not been seen in polysaccharide lyases analyzed thus far. Structural analysis of the disaccharide-bound YesW and a site-directed mutagenesis study suggested that Arg-452 and Lys-535 stabilize the carboxyl group of the acidic polysaccharide molecule and Tyr-595 makes a stack interaction with the sugar pyranose ring. In addition to amino acid residues binding to the disaccharide, one calcium ion, which is coordinated by Asp-401, Glu-422, His-363, and His-399, may mediate the enzyme activity. This is, to our knowledge, the first report of a new structural category with a beta-propeller fold in polysaccharide lyases and provides structural insights into substrate binding by RG lyase.

A Calcium-gated Lid and a Large β-Roll Sandwich Are Revealed by the Crystal Structure of Extracellular Lipase from Serratia marcescens

Lipase LipA from Serratia marcescens is a 613-amino acid enzyme belonging to family I.3 of lipolytic enzymes that has an important biotechnological application in the production of a chiral precursor for the coronary vasodilator diltiazem. Like other family I.3 lipases, LipA is secreted by Gram-negative bacteria via a type I secretion system and possesses 13 copies of a calcium binding tandem repeat motif, GGXGXDXUX (U, hydrophobic amino acids), in the C-terminal part of the polypeptide chain. The 1.8-A crystal structure of LipA reveals a close relation to eukaryotic lipases, whereas family I.1 and I.2 enzymes appear to be more distantly related. Interestingly, the structure shows for the N-terminal lipase domain a variation on the canonical alpha/beta hydrolase fold in an open conformation, where the putative lid helix is anchored by a Ca(2+) ion essential for activity. Another novel feature observed in this lipase structure is the presence of a helical hairpin additional to the putative lid helix that exposes a hydrophobic surface to the aqueous medium and might function as an additional lid. The tandem repeats form two separated parallel beta-roll domains that pack tightly against each other. Variations of the consensus sequence of the tandem repeats within the second beta-roll result in an asymmetric Ca(2+) binding on only one side of the roll. The analysis of the properties of the beta-roll domains suggests an intramolecular chaperone function.

Metal ion-dependent, reversible, protein filament formation by designed beta-roll polypeptides

BACKGROUND

A right-handed, calcium-dependent beta-roll structure found in secreted proteases and repeat-in-toxin proteins was used as a template for the design of minimal, soluble, monomeric polypeptides that would fold in the presence of Ca2+. Two polypeptides were synthesised to contain two and four metal-binding sites, respectively, and exploit stacked tryptophan pairs to stabilise the fold and report on the conformational state of the polypeptide.

RESULTS

Initial analysis of the two polypeptides in the presence of calcium suggested the polypeptides were disordered. The addition of lanthanum to these peptides caused aggregation. Upon further study by right angle light scattering and electron microscopy, the aggregates were identified as ordered protein filaments that required lanthanum to polymerize. These filaments could be disassembled by the addition of a chelating agent. A simple head-to-tail model is proposed for filament formation that explains the metal ion-dependency. The model is supported by the capping of one of the polypeptides with biotin, which disrupts filament formation and provides the ability to control the average length of the filaments.

CONCLUSION

Metal ion-dependent, reversible protein filament formation is demonstrated for two designed polypeptides. The polypeptides form filaments that are approximately 3 nm in diameter and several hundred nm in length. They are not amyloid-like in nature as demonstrated by their behaviour in the presence of congo red and thioflavin T. A capping strategy allows for the control of filament length and for potential applications including the "decoration" of a protein filament with various functional moieties.

Corneal virulence of Pseudomonas aeruginosa elastase B and alkaline protease produced by Pseudomonas putida

PURPOSE

To measure the specific virulence contributions of two Pseudomonas aeruginosa proteases, elastase B and alkaline protease, when expressed separately by Pseudomonas putida in a rabbit model of bacterial keratitis.

METHODS

P. putida KT2440 was transformed with plasmids that enabled the extracellular production of either elastase or alkaline protease. Protease expression was confirmed by zymography and immunoblotting. P. putida expressing elastase, alkaline protease, or vector alone was injected intrastromally (10(3) colony forming units [CFU]) into rabbit corneas (n=6). Infected eyes were graded by slit-lamp examination (SLE) at 20, 24, 28, and 32 hr postinfection (PI). Rabbits were sacrificed at 33 hr PI, and the log CFU (+/-SEM) per cornea was determined.

RESULTS

SLE scores for eyes infected with P. putida producing elastase were significantly higher than those infected with vector alone at all time points (p<or=0.008). SLE scores for eyes infected with P. putida producing alkaline protease were not significantly higher than the control (p>or=0.1), but small erosions formed in 33% of corneas. At both 24 and 28 hr PI, the SLE scores for corneas infected with P. putida producing elastase were significantly higher than those infected with P. putida producing alkaline protease (p<or=0.002).

CONCLUSIONS

Elastase production by P. putida caused significant increases in SLE scores whereas expression of alkaline protease caused limited corneal erosions. This suggests that the production of elastase during P. aeruginosa keratitis enhances ocular pathology, whereas alkaline protease production contributes to limited corneal erosion.

Isolation and characterization of a metagenome-derived and cold-active lipase with high stereospecificity for (R)-ibuprofen esters

We report on the isolation and biochemical characterization of a novel, cold-active and metagenome-derived lipase with a high stereo-selectivity for pharmaceutically important substrates. The respective gene was isolated from a cosmid library derived from oil contaminated soil and designated lipCE. The deduced aa sequence indicates that the protein belongs to the lipase family l.3, with high similarity to Pseudomonas fluorescens lipases containing a C-terminal secretion signal for ABC dependent transport together with possible motifs for Ca(2+)-binding sites. The overexpressed protein revealed a molecular weight of 53.2kDa and was purified by refolding from inclusion bodies after expression in Escherichia coli. The optimum temperature of LipCE was determined to be 30 degrees C. However, the enzyme still displayed 28% residual activity at 0 degrees C and 16% at -5 degrees C. Calcium ions strongly increased activity and thermal stability of the protein. Further detailed biochemical characterization of the recombinant enzyme showed an optimum pH of 7 and that it retained activity in the presence of a range of metal ions and solvents. A detailed analysis of the enzyme's substrate spectrum with more than 34 different substrates indicated that the enzyme was able to hydrolyze a wide variety of substrates including the conversion of long chain fatty acid substrates with maximum activity for pNP-caprate (C(10)). Furthermore LipCE was able to hydrolyze stereo-selectively ibuprofen-pNP ester with a high preference for the (R) enantiomer of >91% ee and it demonstrated selectivity for esters of primary alcohols, whereas esters of secondary or tertiary alcohols were nearly not converted.

The Calcium-binding C-terminal Domain of Escherichia coli α-Hemolysin Is a Major Determinant in the Surface-active Properties of the Protein

alpha-Hemolysin (HlyA) from Escherichia coli is a protein toxin (1024 amino acids) that targets eukaryotic cell membranes, causing loss of the permeability barrier. HlyA consists of two main regions, an N-terminal domain rich in amphipathic helices, and a C-terminal Ca(2+)-binding domain containing a Gly- and Asp-rich nonapeptide repeated in tandem 11-17 times. The latter is called the RTX domain and gives its name to the RTX protein family. It had been commonly assumed that membrane interaction occurred mainly if not exclusively through the amphipathic helix domain. However, we have cloned and expressed the C-terminal region of HlyA, containing the RTX domain plus a few stabilizing sequences, and found that it is a potent surface-active molecule. The isolated domain binds Ca(2+) with about the same affinity (apparent K(0.5) approximately 150 microM) as the parent protein HlyA, and Ca(2+) binding induces in turn a more compact folding with an increased proportion of beta-sheet structure. Both with and without Ca(2+) the C-terminal region of HlyA can interact with lipid monolayers spread at an air-water interface. However, the C-terminal domain by itself is devoid of membrane lytic properties. The present results can be interpreted in the light of our previous studies that involved in receptor binding a peptide in the C-terminal region of HlyA. We had also shown experimentally the distinction between reversible membrane adsorption and irreversible lytic insertion of the toxin. In this context, the present data allow us to propose that both major domains of HlyA are directly involved in membrane-toxin interaction, the nonapeptide repeat, calcium-binding RTX domain being responsible for the early stages of HlyA docking to the target membrane.

Cleavage site analysis of a serralysin-like protease, PrtA, from an insect pathogen Photorhabdus luminescens and development of a highly sensitive and specific substrate

The aim of this study was the development of a sensitive and specific substrate for protease A (PrtA), a serralysin-like metzincin from the entomopathogenic microorganism, Photorhabdus. First, cleavage of three biological peptides, the A and B chains of insulin and beta-lipotropin, and of 15 synthetic peptides, was investigated. In the biological peptides, a preference for the hydrophobic residues Ala, Leu and Val was observed at three substrate positions, P2, P1' and P2'. At these positions in the synthetic peptides the preferred residues were Val, Ala and Val, respectively. They contributed to the efficiency of hydrolysis in the order P1' > P2 > P2'. Six amino acids of the synthetic peptides were sufficient to reach the maximum rate of hydrolysis, in accordance with the ability of PrtA to cleave three amino acids from both the N- and the C-terminus of some fragments of biological peptides. Using the best synthetic peptide, a fluorescence-quenched substrate, N-(4-[4'(dimethylamino)phenylazo]benzoyl-EVYAVES-5-[(2-aminoethyl)amino]naphthalene-1-sulfonic acid, was prepared. The approximately 4 x 10(6) M(-1) x s(-1) specificity constant of PrtA (at K(m) approximately 5 x 10(-5) M and k(cat) approximately 2 x 10(2) s(-1)) on this substrate was the highest activity for a serralysin-type enzyme, allowing precise measurement of the effects of several inhibitors and pH on PrtA activity. These showed the characteristics of a metalloenzyme and a wide range of optimum pH, similar to other serralysins. PrtA activity could be measured in biological samples (Photorhabdus-infected insect larvae) without interference from other enzymes, which indicates that substrate selectivity is high towards PrtA. The substrate sensitivity allowed early (14 h post infection) detection of PrtA, which might indicate PrtA's participation in the establishment of infection and not only, as it has been supposed, in bioconversion.

Cold-active enzymes studied by comparative molecular dynamics simulation

Enzymes from cold-adapted species are significantly more active at low temperatures, even those close to zero Celsius, but the rationale of this adaptation is complex and relatively poorly understood. It is commonly stated that there is a relationship between the flexibility of an enzyme and its catalytic activity at low temperature. This paper gives the results of a study using molecular dynamics simulations performed for five pairs of enzymes, each pair comprising a cold-active enzyme plus its mesophilic or thermophilic counterpart. The enzyme pairs included alpha-amylase, citrate synthase, malate dehydrogenase, alkaline protease and xylanase. Numerous sites with elevated flexibility were observed in all enzymes; however, differences in flexibilities were not striking. Nevertheless, amino acid residues common in both enzymes of a pair (not present in insertions of a structure alignment) are generally more flexible in the cold-active enzymes. The further application of principle component analysis to the protein dynamics revealed that there are differences in the rate and/or extent of opening and closing of the active sites. The results indicate that protein dynamics play an important role in catalytic processes where structural rearrangements, such as those required for active site access by substrate, are involved. They also support the notion that cold adaptation may have evolved by selective changes in regions of enzyme structure rather than in global change to the whole protein.

Structure of the second domain of the Bacillus subtilis DEAD-box RNA helicase YxiN

The Bacillus subtilis RNA helicase YxiN is a modular three-domain protein. The first two domains form a conserved helicase core that couples an ATPase activity to an RNA duplex-destabilization activity, while the third domain recognizes a stem-loop of 23S ribosomal RNA with high affinity and specificity. The structure of the second domain, amino-acid residues 207-368, has been solved to 1.95 A resolution, revealing a parallel alphabeta-fold. The crystallographic asymmetric unit contains two protomers; superposition shows that they differ substantially in two segments of peptide that overlap the conserved helicase sequence motifs V and VI, while the remainder of the domain is isostructural. The conformational variability of these segments suggests that induced fit is intrinsic to the recognition of ligands (ATP and RNA) and the coupling of the ATPase activity to conformational changes.

Interaction of a novel form of Pseudomonas aeruginosa alkaline protease (aeruginolysin) with interleukin-6 and interleukin-8

Pseudomonas aeruginosa secretes several proteases considered as important virulence factors. In this report we present data indicating that two key proinflammatory cytokines, interleukin-6 (IL-6) and IL-8, are substrates for pseudolysin (elastase) and aeruginolysin (alkaline protease). While IL-6 was totally digested by both proteases, a long form of IL-8 (IL-8-77) was first rapidly processed into a 72-residue form with enhanced chemokine activity, then very slowly degraded. Interestingly, aeruginolysin bearing two additional residues at the N-terminus (Leu-Lys-aeruginolysin) in the absence of calcium degraded both IL-6 and IL-8-72 far more efficiently than the shorter form of the enzyme.

Purification and characterization of a hemolysin-like protein, Sll1951, a nontoxic member of the RTX protein family from the Cyanobacterium Synechocystis sp. strain PCC 6803

The hemolysin-like protein (HLP) Sll1951, characterized by the GGXGXDXUX nonapeptide motif implicated in Ca(2+) binding, was purified from the glucose-tolerant strain (GT) of Synechocystis sp. strain PCC 6803. HLP was eluted at 560 kDa after gel filtration chromatography. Atomic absorption spectroscopy indicated that the protein bound calcium. The bound Ca(2+) was not chelated with EGTA; however, it was released after being heated at 100 degrees C for 1 min, and it rebound to the Ca(2+)-depleted protein at room temperature. The apparent HLP molecular mass increased to 1,000 kDa and reverted to 560 kDa during the release and rebinding of Ca(2+), respectively. The monomers of the respective forms appeared at 90 and 200 kDa after sodium dodecyl sulfate-polyacrylamide gel electrophoresis. HLP showed no apparent hemolytic activity against sheep erythrocytes; however, a slight hemolytic activity was detected during the conformational change caused by the rebinding of Ca(2+). Immunoelectron microscopy using polyclonal antibodies against the 200-kDa monomer revealed that HLP is located in the cell surface layer. The localization and Ca(2+)-induced reversible conformational change suggest that HLP is a member of the repeat in toxin (RTX) protein family despite its latent and low toxicity. In some other cyanobacteria, RTX proteins are reported to be necessary for cell motility. However, the GT was immotile. Moreover, the motile wild-type strain did not express any HLP, suggesting that HLP is one of the factors involved in the elimination of motility in the GT. We concluded that the involvement of RTX protein in cyanobacterial cell motility is not a general feature.

Structural and Functional Characterization of an Essential RTX Subdomain of Bordetella pertussis Adenylate Cyclase Toxin

The adenylate cyclase toxin (CyaA) is one of the major virulence factors of Bordetella pertussis, the causative agent of whooping cough. CyaA is able to invade eukaryotic cells by a unique mechanism that consists in a calcium-dependent, direct translocation of the CyaA catalytic domain across the plasma membrane of the target cells. CyaA possesses a series of a glycine- and aspartate-rich nonapeptide repeats (residues 1006-1613) of the prototype GGXG(N/D)DX(L/I/F)X (where X represents any amino acid) that are characteristic of the RTX (repeat in toxin) family of bacterial cytolysins. These repeats are arranged in a tandem fashion and may fold into a characteristic parallel beta-helix or beta-roll motif that constitutes a novel type of calcium binding structure, as revealed by the three-dimensional structure of the Pseudomonas aeruginosa alkaline protease. Here we have characterized the structure-function relationships of various fragments from the CyaA RTX subdomain. Our results indicate that the RTX functional unit includes both the tandem repeated nonapeptide motifs and the adjacent polypeptide segments, which are essential for the folding and calcium responsiveness of the RTX module. Upon calcium binding to the RTX repeats, a conformational rearrangement of the adjacent non-RTX sequences may act as a critical molecular switch to trigger the CyaA entry into target cells.

Pore-forming and enzymatic activities of Bordetella pertussis adenylate cyclase toxin synergize in promoting lysis of monocytes

Bordetella adenylate cyclase (AC) toxin-hemolysin (CyaA) targets myeloid phagocytes expressing the alphaMbeta2 integrin (CD11b/CD18) and delivers into their cytosol an AC enzyme that converts ATP into cyclic AMP (cAMP). In parallel, CyaA acts as a hemolysin, forming small membrane pores. Using specific mutations, we dissected the contributions of the two activities to cytolytic potency of CyaA on J774A.1 murine monocytes. The capacity of AC to penetrate cells and deplete cytosolic ATP was essential for promoting lysis and the enzymatically inactive but fully hemolytic CyaA-AC- toxoid exhibited a 15-fold-lower cytolytic capacity on J774A.1 cells than intact CyaA. Moreover, a two- or fourfold drop of specific hemolytic activity of the CyaA-E570Q and CyaA-E581P mutants was overpowered by an intact capacity to dissipate cytosolic ATP into cAMP, allowing the less hemolytic proteins to promote lysis of J774A.1 cells as efficiently as intact CyaA. However, an increased hemolytic activity, due to lysine substitutions of glutamates 509, 516, and 581 in the pore-forming domain, conferred on AC- toxoids a correspondingly enhanced cytolytic potency. Moreover, a threefold increase in hemolytic activity could override a fourfold drop in capacity to convert cellular ATP to cAMP, conferring on the CyaA-E581K construct an overall twofold increased cytolytic potency. Hence, although appearing auxiliary in cytolytic action of the toxin on nucleated cells, the pore-forming activity can synergize with ATP-depleting activity of the cell-invasive AC enzyme and complement its action toward maximal cytotoxicity.

Standard Conformations of β-Arches in β-Solenoid Proteins

Strand-turn-strand motifs found in beta-helical (more generally, beta-solenoid) proteins differ fundamentally from those found in globular proteins. The latter are primarily beta-hairpins in which the two strands form an antiparallel beta-sheet. In the former, the two strands are relatively rotated by approximately 90 degrees around the strand axes so that they interact via the side-chains, not via the polypeptide backbones. We call the latter structures, beta-arches, and their turns, beta-arcs. In beta-solenoid proteins, beta-arches stack in-register to form beta-arcades in which parallel beta-sheets are assembled from corresponding strands in successive layers. The number of beta-solenoids whose three-dimensional structures have been determined is now large enough to support a detailed analysis and classification of beta-arc conformations. Here, we present a systematic account of beta-arcs distinguished by the number of residues, their conformations, and their propensity to stack into arcades with other like or unlike arches. The trends to emerge from this analysis have implications for sequence-based detection and structural prediction of other beta-solenoid proteins as well as for identification of amyloidogenic sequences and elucidation of amyloid fibril structures.

Membrane Insertion of Escherichia coli α-Hemolysin Is Independent from Membrane Lysis

Escherichia coli alpha-hemolysin (HlyA) is a protein exotoxin that binds and lyses eukaryotic cell and model membranes in the presence of calcium. Previous studies have been able to distinguish between reversible toxin binding to the membrane and irreversible insertion into the lipid matrix. Membrane lysis occurs as the combined effect of protein insertion plus a transient perturbation of the membrane bilayer structure. In the past, insertion and bilayer perturbation have not been experimentally dissected. This has now been achieved by studying HlyA penetration into lipid monolayers at the air-water interface, in which three-dimensional effects (of the kind required to break down the bilayer permeability barrier) cannot occur. The study of native HlyA, together with the nonlytic precursor pro-HlyA, and of different mutants demonstrates that although some nonlytic variants (e.g. pro-HlyA) exhibit very low levels of insertion, others (e.g. the nonlytic mutant HlyA H859N) insert even more strongly than the lytic wild type. These results show that insertion does not necessarily lead to membrane lysis, i.e. that insertion and lysis are not "coupled" phenomena. Millimolar levels of Ca(2+), which are essential for the lytic activity, cause an extra degree of insertion but only in the case of the lytic forms of HlyA.

NMR Structure of the R-module

In the bacterium Azotobacter vinelandii, a family of seven secreted and calcium-dependent mannuronan C-5 epimerases (AlgE1-7) has been identified. These epimerases are responsible for the epimerization of beta-d-mannuronic acid to alpha-l-guluronic acid in alginate polymers. The epimerases consist of two types of structural modules, designated A (one or two copies) and R (one to seven copies). The structure of the catalytically active A-module from the smallest epimerase AlgE4 (consisting of AR) has been solved recently. This paper describes the NMR structure of the R-module from AlgE4 and its titration with a substrate analogue and paramagnetic thulium ions. The R-module folds into a right-handed parallel beta-roll. The overall shape of the R-module is an elongated molecule with a positively charged patch that interacts with the substrate. Titration of the R-module with thulium indicated possible calcium binding sites in the loops formed by the nonarepeat sequences in the N-terminal part of the molecule and the importance of calcium binding for the stability of the R-module. Structure calculations showed that calcium ions can be incorporated in these loops without structural violations and changes. Based on the structure and the electrostatic surface potential of both the A- and R-module from AlgE4, a model for the appearance of the whole protein is proposed.

Expression, purification and molecular modeling of recombinant fibrinogenase [IV], a metalloproteinase from Deinakistrodon acutus venom

A novel metalloproteinase, recombinant fibrinogenase IV (rFIV(a)), was expressed and purified from Deinakistrodon acutus venom. It was a single chain protein with an apparent molecular weight 27 kDa and an isoeletric point of pH 7.1. RFIV(a) cleaved preferentially the Aalpha-chain and also cleaved Bbeta, gamma-chains of fibrinogen when the incubation time was prolonged. The proteolytic activity was inhibited by EDTA, l-cysteine, and DTT, indicating rFIV(a) was a metalloproteinase requiring disulfide bonds for its activity. It kept above 85% of the initial activity from pH 4.5-11, showed an equal maximum activity at the temperature range from 30 to 50 degrees C, and was inactivated by Zn2+, Cu2+ and Cd2+. Homology modeling of rFIV(a) showed that two highly conserved disulfide bonds (Cys159-Cys164 and Cys117-Cys197) was maintained from its structure, and it exhibited the characteristic conserved motif H142E143XXH146XXGXXH152, whose three histidine residues were involved in binding of the catalytically essential zinc ion. This work demonstrates the expression, purification and characterization of recombinant fibrinogenase IV, which belongs to class P-I metalloproteinase from D. acutus venom.

β‐Rolls, β‐Helices, and Other β‐Solenoid Proteins

Beta-rolls and beta-helices belong to a larger group of topologically similar proteins with solenoid folds: because their regular secondary structure elements are exclusively beta-strands, they are referred to as beta-solenoids. The number of beta-solenoids whose structures are known is now large enough to support a systematic analysis. Here we survey the distinguishing structural features of beta-solenoids, also documenting their notable diversity. Appraisal of these structures suggests a classification based on handedness, twist, oligomerization state, and coil shape. In addition, beta-solenoids are distinguished by the number of chains that wind around a common axis: the majority are single-stranded but there is a recently discovered subset of triple-stranded beta-solenoids. This survey has revealed some relationships of the amino acid sequences of beta-solenoids with their structures and functions-in particular, the repetitive character of the coil sequences and conformations that recur in tracts of tandem repeats. We have proposed the term beta-arc for the distinctive turns found in beta-solenoids and beta-arch for the corresponding strand-turn-strand motifs. The evolutionary mechanisms underlying these proteins are also discussed. This analysis has direct implications for sequence-based detection, structural prediction, and de novo design of other beta-solenoid proteins. The abundance of virulence factors, toxins and allergens among beta-solenoids, as well as commonalities of beta-solenoids with amyloid fibrils, imply that this class of folds may have a broader role in human diseases than was previously recognized. Thus, identification of genes with putative beta-solenoid domains promises to be a fertile direction in the search for viable targets in the development of new antibiotics and vaccines.

Mutations in HlyD, part of the type 1 translocator for hemolysin secretion, affect the folding of the secreted toxin

HlyD, a member of the membrane fusion protein family, is essential for the secretion of the RTX hemolytic toxin HlyA from Escherichia coli. Random point mutations affecting HlyA secretion were obtained, distributed in most periplasmic regions of the HlyD molecule. Analysis of the secretion phenotypes of different mutants allowed the identification of regions in HlyD involved in different steps of HlyA translocation. Four mutants, V349-I, T85-I, V334-I and L165-Q, were conditionally defective, a phenotype shown to be linked to the presence of inhibitory concentrations of Ca2+ in extracellular medium. Hly mutant T85-I was defective at an early stage in secretion, while mutants V334-I and L165-Q appeared to accumulate HlyA in the cell envelope, indicating a block at an intermediate step. Mutants V349-I, V334-I, and L165-Q were only partially defective in secretion, allowing significant levels of HlyA to be transported, but in the case of V349-I and L165-Q the HlyA molecules secreted showed greatly reduced hemolytic activity. Hemolysin molecules secreted from V349-I and V334-I are defective in normal folding and can be reactivated in vitro to the same levels as HlyA secreted from the wild-type translocator. Both V349-I and V334-I mutations mapped to the C-terminal lipoyl repeat motif, involved in the switching from the helical hairpin to the extended form of HlyD during assembly of the functional transport channel. These results suggest that HlyD is an integral component of the transport pathway, whose integrity is essential for the final folding of secreted HlyA into its active form.

The Escherichia coli Hemolysin

The Escherichia coli hemolysin, earlier referred to as the hemolysin, is the best-characterized repeats in toxin (RTX) secreted by a type I exoprotein secretion system. The E. coli hemolysin is a significant virulence factor in murine models of peritonitis and ascending urinary tract infection, which suggests it is likely to be an important cytotoxin in human, extraintestinal E. coli diseases. Among E. coli or Salmonella strains there are no known examples of strict RTX leukotoxins in which lytic activity is limited to white blood cells. The general gene organization of the Vibrio cholerae RTX locus is similar to that seen with either of the E. coli hly and ehx loci with C, B, and D RTX homologs, clearly indicating it is a member of the RTX family. The hemolysin occurs less frequently in cystitis strains and only rarely among normal fecal strains. Among the extraintestinal E. coli isolates, the hlyCABDgenes were among the first virulence factors localized to unique, tRNA-associated segments of E. coli chromosomes. The hemolysin genes were eventually linked to P-type pilin and cytotoxic necrotizing factor-1 genes. Recent progress with its study has slowed down because of the difficulty in deriving the physical structure of the hemolysin protein or other RTX toxins and establishing its precise cytotoxic mechanism and role in pathogenesis of extraintestinal E. coli disease. Genomic sequencing has revealed that there are additional RTX-like genes found among many different pathogens; perhaps new efforts to discover their functions will aid progress in the RTX toxin field.

A molecular understanding of the catalytic cycle of the nucleotide-binding domain of the ABC transporter HlyB

The ABC transporter (ATP-binding-cassette transporter) HlyB (haemolysin B) is the central element of a type I secretion machinery, dedicated to the secretion of the toxin HlyA in Escherichia coli. In addition to the ABC transporter, two other indispensable elements are necessary for the secretion of the toxin across two membranes in a single step: the transenvelope protein HlyD and the outer membrane protein TolC. Despite the fact that the hydrolysis of ATP by HlyB fuels secretion of HlyA, the essential features of the underlying transport mechanism remain an enigma. Similar to all other ABC transporters, ranging from bacteria to man, HlyB is composed of two NBDs (nucleotide-binding domains) and two transmembrane domains. Here we summarize our detailed biochemical, biophysical and structural studies aimed at an understanding of the molecular principles of how ATP-hydrolysis is coupled to energy transduction, including the conformational changes occurring during the catalytic cycle, leading to substrate transport. We have obtained individual crystal structures for each single ground state of the catalytic cycle. From these and other biochemical and mutational studies, we shall provide a detailed molecular picture of the steps governing intramolecular communication and the utilization of chemical energy, due to ATP hydrolysis, in relation to resulting structural changes within the NBD. These data will be summarized in a general model to explain how these molecular machines achieve translocation of molecules across biological membranes.

Nonnatural amino acid incorporation into the methionine 214 position of the metzincin Pseudomonas aeruginosa alkaline protease

Background

The alkaline protease from Pseudomonas aeruginosa (AprA) is a member of the metzincin superfamily of metalloendoproteases. A key feature of these proteases is a conserved methionine-containing 1,4-tight β turn at the base of the active site zinc binding region.

Results

To explore the invariant methionine position in this class of protease, incorporation of a nonnatural fluorinated methionine, L-difluoromethionine (DFM), into this site was accomplished. Although overproduction of the N-terminal catalytic fragment of AprA resulted in protein aggregates which could not be resolved, successful heterologous production of the entire AprA was accomplished in the presence and absence of the nonnatural amino acid. DFM incorporation was found to only slightly alter the enzyme kinetics of AprA. In addition, differential scanning calorimetry indicated no significant alteration in the thermal stability of the modified enzyme.

Conclusion

Although invariant in all metzincin proteases, the methionine 214 position in AprA can be successfully replaced by the nonnatural amino acid DFM resulting in little effect on protein structure and function. This study indicates that the increased size of the methyl group by the introduction of two fluorines is still sufficiently non-sterically demanding, and bodes well for the application of DFM to biophysical studies of protein structure and function in this class of protease.

CHDL: A cadherin-like domain in Proteobacteria and Cyanobacteria

We identified a cadherin-like domain (CHDL) using computational analysis. The CHDL domain is mostly distributed in Proteobacteria and Cyanobacteria, although it is also found in some eukaryotic proteins. Prediction of three-dimensional protein folding indicated that the CHDL domain has an immunoglobulin beta-sandwich fold and belongs to the cadherin superfamily. The CHDL domain does not have LDRE and DxNDN motifs, which are conserved in the cadherin domain, but has three other motifs: PxAxxD, DxDxD and YT-V/I-S/T-D, which might contribute to forming a calcium-binding site. The identification of this cadherin-like domain indicates that the cadherin superfamily may exhibit wider sequence and structural diversity than previously appreciated. Domain architecture analysis revealed that the CHDL domain is also associated with other adhesion domains as well as enzyme domains. Based on computational analysis and previous experimental data, we predict that the CHDL domain has calcium-binding and also carbohydrate-binding activity.

Type 1 protein secretion in bacteria, the ABC-transporter dependent pathway (review)

The relatively simple type 1 secretion system in gram-negative bacteria is nevertheless capable of transporting polypeptides of up to 800 kDa across the cell envelope in a few seconds. The translocator is composed of an ABC-transporter, providing energy through ATP hydrolysis (and perhaps the initial channel across the inner membrane), linked to a multimeric Membrane Fusion Protein (MFP) spanning the initial part of the periplasm and forming a continuous channel to the surface with an outer membrane trimeric protein. Proteins targeted to the translocator carry an (uncleaved), poorly conserved secretion signal of approximately 50 residues. In E. coli the HlyA toxin interacts with both the MFP (HlyD) and the ABC protein HlyB, (a half transporter) triggering, via a conformational change in HlyD, recruitment of the third component, TolC, into the transenvelope complex. In vitro, HlyA, through its secretion signal, binds to the nucleotide binding domain (NBD or ABC-ATPase) of HlyB in a reaction reversible by ATP that may mimic initial movement of HlyA into the translocation channel. HlyA is then transported rapidly, apparently in an unfolded form, to the cell surface, where folding and release takes place. Whilst recent structural studies of TolC and MFP-like proteins are providing atomic detail of much of the transport path, structural analysis of the HlyB NBD and other ABC ATPases, have revealed details of the catalytic cycle within an NBD dimer and a glimpse of how the action of HlyB is coupled to the translocation of HlyA.

Importance of a repetitive nine-residue sequence motif for intracellular stability and functional structure of a family I.3 lipase

PML5 is a functional derivative of a family I.3 lipase from Pseudomonas sp. MIS38 and contains five repeats of a nine-residue sequence motif. Two aspartate residues within the second and third repetitive sequences of PML5 were replaced by Ala. The secretion level, intracellular accumulation level, and stability of the resultant mutant protein were greatly reduced as compared to those of PML5. In addition, this mutant protein was inactive and did not bind Ca2+ ion. We propose that the repetitive sequences of PML5 form a beta-roll structure in the cells and thereby contribute to the intracellular stability and secretion efficiency of the protein.

Functional analysis of the Tsh autotransporter from an avian pathogenic Escherichia coli strain

The temperature-sensitive hemagglutinin (Tsh) is an autotransporter protein secreted by avian-pathogenic Escherichia coli strains that colonize the respiratory tract and lead to airsacculitis, pericarditis, and colisepticemia. It is synthesized as a 140-kDa precursor protein, whose processing results in a 106-kDa passenger domain (Tshs) and a 33-kDa beta-domain (Tsh(beta)). The presence of a conserved 7-amino-acid serine protease motif within Tshs classifies the protein in a subfamily of autotransporters, known as serine protease autotransporters of the Enterobacteriaceae. In this study, we report that purified Tshs is capable of adhering to red blood cells, hemoglobin, and the extracellular matrix proteins fibronectin and collagen IV. We also demonstrate that Tshs exerts proteolytic activity against casein, and we provide experimental evidence demonstrating that serine 259 is essential for the protease function. However, this residue is not required for adherence to substrates, and its replacement by an alanine does not abolish binding activity. In summary, our results demonstrate that Tsh is a bifunctional protein with both adhesive and proteolytic properties.

A model for Ure2p prion filaments and other amyloids: the parallel superpleated beta-structure

In its prion form, Ure2p, a regulator of nitrogen catabolism in Saccharomyces cerevisiae, polymerizes into filaments whereby its C-terminal regulatory domain is inactivated but retains its native fold. The filament has an amyloid fibril backbone formed by the Asn-rich, N-terminal, "prion" domain. The prion domain is also capable of forming fibrils when alone or when fused to other proteins. We have developed a model for the fibril that we call a parallel superpleated beta-structure. In this model, the prion domain is divided into nine seven-residue segments, each with a four-residue strand and a three-residue turn, that zig-zag in a planar serpentine arrangement. Serpentines are stacked axially, in register, generating an array of parallel beta-sheets, with a small and potentially variable left-hand twist. The interior of the filament is mostly stabilized not by packing of apolar side chains but by H-bond networks generated by the stacking of Asn side chains: charged residues are excluded. The model is consistent with current biophysical, biochemical, and structural data (notably, mass-per-unit-length measurements by scanning transmission electron microscopy that gave one subunit rise per 0.47 nm) and is readily adaptable to other amyloids, for instance the core of Sup35p filaments and glutamine expansions in huntingtin.

Purification and Cloning of an Endogenous Protein Inhibitor of Carp Nephrosin, an Astacin Metalloproteinase

Nephrosin is a newly discovered member of the astacin family. It is a secreted proteinase and is present in carp head kidney, kidney, and spleen, all of which are responsible for immune and hematopoietic functions in fish. A complex formed by nephrosin and its inhibitor was purified from carp kidney extract by heparin affinity column chromatography. The presence of the nephrosin-inhibitor complex in different tissues was examined by immunoblotting with polyclonal antisera against the purified nephrosin inhibitor and nephrosin. Both nephrosin and the nephrosin inhibitor were present mainly in gill, head kidney, kidney, and spleen. In addition, we have cloned the cDNA encoding the nephrosin inhibitor. There are two different cDNA clones possibly resulting from two different genes, and the long form contains unique tandem repeat sequences in the 3'-end. The deduced primary structure of nephrosin inhibitor is similar to that of fetuin-A, a mammalian protein present in blood, liver, cerebrospinal fluid, and cerebral cortex during fetal development. Treatment with both N-glycosidase F and O-glycosidase removed the carbohydrate moiety of the nephrosin inhibitor and decreased the apparent molecular mass from 40 to 30 kDa. The nephrosin inhibitor seems to be synthesized in liver and then secreted to the blood as a precursor. When it was distributed into hematopoietic tissues, it was processed from 67 to 40 kDa and acquired inhibitory activity. This processing phenomenon of fetuin has not been reported elsewhere. Importantly, the presence of an endogenous inhibitor of nephrosin is the first report of this kind for astacin enzymes. It is very likely that endogenous tissue inhibitors may also be present for the regulation of other astacin enzymes.

Channel-tunnels: outer membrane components of type I secretion systems and multidrug efflux pumps of Gram-negative bacteria

For translocation across the cell envelope of Gram-negative bacteria, substances have to overcome two permeability barriers, the inner and outer membrane. Channel-tunnels are outer membrane proteins, which are central to two distinct export systems: the type I secretion system exporting proteins such as toxins or proteases, and efflux pumps discharging antibiotics, dyes, or heavy metals and thus mediating drug resistance. Protein secretion is driven by an inner membrane ATP-binding cassette (ABC) transporter while drug efflux occurs via an inner membrane proton antiporter. Both inner membrane transporters are associated with a periplasmic accessory protein that recruits an outer membrane channel-tunnel to form a functional export complex. Prototypes of these export systems are the hemolysin secretion system and the AcrAB/TolC drug efflux pump of Escherichia coli, which both employ TolC as an outer membrane component. Its remarkable conduit-like structure, protruding 100 A into the periplasmic space, reveals how both systems are capable of transporting substrates across both membranes directly from the cytosol into the external environment. Proteins of the channel-tunnel family are widespread within Gram-negative bacteria. Their involvement in drug resistance and in secretion of pathogenic factors makes them an interesting system for further studies. Understanding the mechanism of the different export apparatus could help to develop new drugs, which block the efflux pumps or the secretion system.

Calcium-Dependent Conformational Change and Thermal Stability of the Isolated PsbO Protein Detected by FTIR Spectroscopy

The structure and function of the photosystem II PsbO extrinsic protein is under intense research, being an essential part of the biomolecular engine that carries out water oxidation and oxygen production. This paper presents a structural analysis of the isolated PsbO protein by FTIR spectroscopy, reporting detailed secondary structure quantification and changes in the secondary structure content of the protein attributed to the effect of calcium (Ca(2+)). Measurements in H(2)O and D(2)O have allowed us to see the effect of calcium on the conformation of the protein. The results indicate that (i) the protein presents a major content of beta-structure (i.e., beta-sheet, beta-strands, beta-turns) as detected by the infrared bands at 1624-1625, 1678-1679, 1688-1689 cm(-1), which account for about 38% in water and 33% in heavy water, in the presence of calcium; and (ii) the amount of this beta-structure fraction increases 7-10% in the absence of calcium, with a concomitant decrease in loops and nonordered structure. The thermal denaturation profile of the protein in the presence of calcium showed low stability with T(m) approximately 56 degrees C. This profile also shows a second phase of denaturation above 60 degrees C and the appearance of aggregation signals above 70 degrees C. Our observations indicate that calcium is able to modify the conformation of the protein at least in solution and confirm that PsbO is mainly a beta-protein where beta-sheet is the major ordered secondary structure element of the protein core.

Transition from reversible to irreversible attachment during biofilm formation by Pseudomonas fluorescens WCS365 requires an ABC transporter and a large secreted protein

We report the identification of an ATP-binding cassette (ABC) transporter and an associated large cell-surface protein that are required for biofilm formation by Pseudomonas fluorescens WCS365. The genes coding for these proteins are designated lap for large adhesion protein. The LapA protein, with a predicted molecular weight of approximately 900 kDa, is found to be loosely associated with the cell surface and present in the culture supernatant. The LapB, LapC and LapE proteins are predicted to be the cytoplasmic membrane-localized ATPase, membrane fusion protein and outer membrane protein component, respectively, of an ABC transporter. Consistent with this prediction, LapE, like other members of this family, is localized to the outer membrane. We propose that the lapEBC-encoded ABC transporter participates in the secretion of LapA, as strains with mutations in the lapEBC genes do not have detectable LapA associated with the cell surface or in the supernatant. The lap genes are conserved among environmental pseudomonads such as P. putida KT2440, P. fluorescens PfO1 and P. fluorescens WCS365, but are absent from pathogenic pseudomonads such as P. aeruginosa and P. syringae. The wild-type strain of P. fluorescens WCS365 and its lap mutant derivatives were assessed for their biofilm forming ability in static and flow systems. The lap mutant strains are impaired in an early step in biofilm formation and are unable to develop the mature biofilm structure seen for the wild-type bacterium. Time-lapse microscopy studies determined that the lap mutants are unable to progress from reversible (or transient) attachment to the irreversible attachment stage of biofilm development. The lap mutants were also found to be defective in attachment to quartz sand, an abiotic surface these organisms likely encounter in the environment.

Alkaline proteinase inhibitor of Pseudomonas aeruginosa: a mutational and molecular dynamics study of the role of N-terminal residues in the inhibition of Pseudomonas alkaline proteinase

Alkaline proteinase inhibitor of Pseudomonas aeruginosa is a 11.5-kDa, high affinity inhibitor of the serralysin class of zinc-dependent proteinases secreted by several Gram-negative bacteria. X-ray crystallography of the proteinase-inhibitor complex reveals that five N-terminal inhibitor residues occupy the extended substrate binding site of the enzyme and that the catalytic zinc is chelated by the alpha-amino and carbonyl groups of the N-terminal residue of the inhibitor. In this study, we assessed the effect of alteration of inhibitor residues 2-5 on its affinity for Pseudomonas alkaline proteinase (APR) as derived from the ratio of the dissociation and associate rate constants for formation of the enzyme-inhibitor complex. The largest effect was observed at position Ser-2, which occupies the S1' pocket of the enzyme and donates a hydrogen bond to the carboxyl group of the catalytic Glu-177 of the proteinase. Substitution of Asp, Arg, or Trp at this position increased the dissociation constant KD by 35-, 180-, and 13-fold, respectively. Mutation at positions 3-5 of the trunk also resulted in a reduction in enzyme-inhibitor affinity, with the exception of an I4W mutant, which exhibited a 3-fold increase in affinity. Molecular dynamics simulation of the complex formation between the catalytic domain of APR and the S2D mutant showed that the carboxyl of Asp-2 interacts with the catalytic zinc, thereby partially neutralizing the negative charge that otherwise would clash with the carboxyl group of Glu-177 of APR. Simulation of the interaction between the alkaline proteinase and the I4W mutant revealed a major shift in the loop comprised of residues 189-200 of the enzyme that allowed formation of a stacking interaction between the aromatic rings of Ile-4 of the inhibitor and Tyr-158 of the proteinase. This new interaction could account for the observed increase in enzyme-inhibitor affinity.

Asp-863 is a key residue for calcium-dependent activity of Escherichia coli RTX toxin alpha-haemolysin

alpha-Haemolysin is a protein toxin secreted by pathogenic strains of Escherichia coli and requires sub-millimolar Ca(2+) for optimum lytic activity. As a member of the so-called RTX toxin family it contains a Gly-rich, Asp-rich Ca(2+)-binding domain, consisting of a series of nonapeptides repeated in tandem. Asp-863 is located immediately after the last-but-one nonapeptide. A mutant in which Asp-863 has been substituted by Gly displays a requirement for Ca(2+) that is 100-fold higher than the wild-type. Membrane lytic activity, as well as a conformational change revealed through an increase in intrinsic fluorescence, and the appearance of Ca(2+)-bound protein monomers resolvable by fast protein liquid chromatography, are all three dependent on Ca(2+) concentrations in the 2-20 mM range. Most RTX toxins have an Asp or Glu residue located at a position homologous to Asp-863, thus the key role of this residue for Ca(2+) requirements of alpha-haemolysin may be a general feature of this family of toxins.

Channel formation in model membranes by the adenylate cyclase toxin of Bordetella pertussis: effect of calcium

Calmodulin-dependent adenylate cyclase toxin (ACT or CyaA) of Bordetella pertussis requires calcium ions for target cell binding, formation of hemolytic channels, and delivery of its enzyme component into cells. We examined the effect of calcium and calmodulin on toxin interaction with planar lipid bilayers. While calmodulin binding did not affect the properties of CyaA channels, addition of calcium ions and toxin to the same side of the membrane caused a steep increase of the channel-forming capacity of CyaA. The calcium effect was highly specific, since among other divalent cations only strontium caused some CyaA activity enhancement. The minimal stimulatory concentration of calcium ions ranged from 0.6 to 0.8 mM, depending on the ionic strength of the aqueous phase. Half-maximal channel activity of CyaA was observed at 2-4 mM, and saturation was reached at 10 mM calcium concentration, respectively. The unit size of single CyaA channels, assessed as single-channel conductance, was not affected by calcium ions, while the frequency of CyaA channel formation strongly depended on calcium concentration. The calcium effect was abrogated upon deletion of the RTX repeats of the toxin, suggesting that binding of calcium ions to the repeats modulates the propensity of CyaA to form membrane channels.

Probing the role of divalent metal ions in a bacterial psychrophilic metalloprotease: binding studies of an enzyme in the crystalline state by x-ray crystallography

The psychrophilic alkaline metalloprotease (PAP) produced by a Pseudomonas bacterium isolated in Antarctica belongs to the clan of metzincins, for which a zinc ion is essential for catalytic activity. Binding studies in the crystalline state have been performed by X-ray crystallography in order to improve the understanding of the role of the zinc and calcium ions bound to this protease. Cocrystallization and soaking experiments with EDTA in a concentration range from 1 to 85 mM have resulted in five three-dimensional structures with a distinct number of metal ions occupying the ion-binding sites. Evolution of the structural changes observed in the vicinity of each cation-binding site has been studied as a function of the concentration of EDTA, as well as of time, in the presence of the chelator. Among others, we have found that the catalytic zinc ion was the first ion to be chelated, ahead of a weakly bound calcium ion (Ca 700) exclusive to the psychrophilic enzyme. Upon removal of the catalytic zinc ion, the side chains of the active-site residues His-173, His-179 and Tyr-209 shifted approximately 4, 1.0, and 1.6 A, respectively. Our studies confirm and also explain the sensitivity of PAP toward moderate EDTA concentrations and propose distinct roles for the calcium ions. A new crystal form of native PAP validates our previous predictions regarding the adaptation of this enzyme to cold environments as well as the proteolytic domain calcium ion being exclusive for PAP independent of crystallization conditions.