Enhancing the vascularization of three-dimensional porous alginate scaffolds by incorporating controlled release basic fibroblast growth factor microspheres

Application of microtechnologies for the vascularization of engineered tissues

Recent advances in medicine and healthcare allow people to live longer, increasing the need for the number of organ transplants. However, the number of organ donors has not been able to meet the demand, resulting in an organ shortage. The field of tissue engineering has emerged to produce organs to overcome this limitation. While tissue engineering of connective tissues such as skin and blood vessels have currently reached clinical studies, more complex organs are still far away from commercial availability due to pending challenges with in vitro engineering of 3D tissues. One of the major limitations of engineering large tissue structures is cell death resulting from the inability of nutrients to diffuse across large distances inside a scaffold. This task, carried out by the vasculature inside the body, has largely been described as one of the foremost important challenges in engineering 3D tissues since it remains one of the key steps for both in vitro production of tissue engineered construct and the in vivo integration of a transplanted tissue. This short review highlights the important challenges for vascularization and control of the microcirculatory system within engineered tissues, with particular emphasis on the use of microfabrication approaches.

Effects of the immobilization of heparin and rhPDGF-BB to titanium surfaces for the enhancement of osteoblastic functions and anti-inflammation

PURPOSE

This study was to investigate the effects of recombinant human platelet-derived growth factor (rhPDGF-BB) and heparin to titanium surfaces for enhancement of osteoblastic functions and inhibition of inflammation activity.

MATERIALS AND METHODS

The anodized titanium discs, not coated with any material, were used as a control group. In heparinized- Ti group, dopamine was anchored to the surface of Ti substrates, and coated with heparin. In PDGF-Ti group, rhPDGF-BB was immobilized onto heparinized Ti surface. The surface morphologies were investigated by the scanning electron microscope in each group. The release kinetics of rhPDGF-BB were analyzed, and cytotoxicity tests for each group were conducted. The biocompatibilities were characterized by measuring cell proliferation, alkaline phosphatase activity, and calcium deposition using MG-63 cells. Statistical comparisons were carried out by one-way ANOVA tests. Differences were considered statistically significant at ^*P<.05 and ^**P<.001.

RESULTS

The combination of rhPDGF-BB and heparin stimulated alkaline phosphatase activity and OCN mRNA expression in osteoblastic cells (^*P<.05 and ^**P<.001). MG-63 cells grown on PDGF-Ti had significantly higher amounts of calcium deposition than those grown on anodized Ti (^**P<.001). Heparinized Ti was more anti-inflammatory compared to anodized Ti, when exposed to lipopolysaccharide using the transcript levels of TNF-α and IL-6 of proinflammatory cytokine (^*P<.05 and ^**P<.001).

CONCLUSION

The result of this study demonstrated that the incorporation of rhPDGF-BB and heparin onto Ti surface enhanced osteoblastic functions and inhibited inflammation.

The effect of immobilization of heparin and bone morphogenic protein-2 to bovine bone substitute on osteoblast-like cell's function

PURPOSE

This study was performed to investigate the ability of recombinant human-bone morphogenic protein-2 immobilized on a heparin-grafted bone substrate to enhance the osteoblastic functions.

MATERIALS AND METHODS

The Bio-Oss®, not coated with any material, was used as a control group. In rhBMP-2-Bio-Oss® group, rhBMP-2 was coated with Bio-Oss® using only deep and dry methods (50 ng/mL, 24 h). In heparinized rhBMP-2-Bio-Oss® group, dopamine was anchored to the surface of Bio-Oss®, and coated with heparin. rhBMP-2 was immobilized onto the heparinized- Bio-Oss® surface. The release kinetics of the rhBMP-2-Bio-Oss® and heparinized rhBMP-2-Bio-Oss® were analyzed using an enzyme-linked immunosorbent assay. The biological activities of the MG63 cells on the three groups were investigated via cytotoxicity assay, cell proliferation assay, alkaline phosphatase (ALP) measurement, and calcium deposition determination. Statistical comparisons were carried out by one-way ANOVA test. Differences were considered statistically significant at ^*P<.05 and ^**P<.001.

RESULTS

The heparinized rhBMP-2-Bio-Oss® showed more sustained release compared to the rhBMP-2-Bio-Oss® over an extended time. In the measurement of the ALP activity, the heparinized group showed a significantly higher ALP activity when compared with the non-heparinized groups (P<.05). The MG63 cells cultivated in the group with rhBMP-2 showed increased calcium deposition, and the MG63 cells from the heparinized group increased more than those that were cultivated in the non-heparinized groups.

CONCLUSION

Heparin increased the rhBMP-2 release amount and made sustained release possible, and heparinized Bio-Oss® with rhBMP-2 successfully improved the osteoblastic functions.

Scaffold vascularization in vivo driven by primary human osteoblasts in concert with host inflammatory cells

Successful cell-based tissue engineering requires a rapid and thorough vascularization in order to ensure long-term implant survival and tissue integration. The vascularization of a scaffold is a complex process, and is modulated by the presence of transplanted cells, exogenous and endogenous signaling proteins, and the host tissue reaction, among other influencing factors. This paper presents evidence for the significance of pre-seeded osteoblasts for the in vivo vascularization of a biodegradable scaffold. Human osteoblasts, cultured on silk fibroin micronets in vitro, migrated throughout the interconnected pores of the scaffold and produced extensive bone matrix. When these constructs were implanted in SCID mice, a rapid and thorough vascularization of the scaffold by the host blood capillaries occurred. This profound response was not seen for the silk fibroin scaffold alone. Moreover, when the pre-cultivation time of human osteoblasts was reduced from 14 days to only 24 h, the significant effect these cells exerted on vascularization rate in vivo was still detectable. From these studies, we conclude that matrix and soluble factors produced by osteoblasts can serve to instruct host endothelial cells to migrate, proliferate, and initiate the process of scaffold vascularization. This finding represents a potential paradigm shift for the field of tissue engineering, especially in bone, as traditional strategies to enhance scaffold vascularization have focused on endovascular cells and regarded osteoblasts primarily as cell targets for mineralization. In addition, the migration of host macrophages and multinucleated giant cells into the scaffold was also found to influence the vascularization of the biomaterial. Therefore, the robust effect on scaffold vascularization seen by pre-culturing with osteoblasts appears to occur in concert with the pro-angiogenic stimuli arising from host immune cells.

Strategies for tissue engineering cardiac constructs to affect functional repair following myocardial infarction

Tissue-engineered cardiac constructs are a high potential therapy for treating myocardial infarction. These therapies have the ability to regenerate or recreate functional myocardium following the infarction, restoring some of the lost function of the heart and thereby preventing congestive heart failure. Three key factors to consider when developing engineered myocardial tissue include the cell source, the choice of scaffold, and the use of biomimetic culture conditions. This review details the various biomaterials and scaffold types that have been used to generate engineered myocardial tissues as well as a number of different methods used for the fabrication and culture of these constructs. Specific bioreactor design considerations for creating myocardial tissue equivalents in vitro, such as oxygen and nutrient delivery as well as physical stimulation, are also discussed. Lastly, a brief overview of some of the in vivo studies that have been conducted to date and their assessment of the functional benefit in repairing the injured heart with engineered myocardial tissue is provided.

Alginate scaffold for organ culture of cryopreserved-thawed human ovarian cortical follicles

PURPOSE

To compare macroporous alginate scaffolds with Matrigel for culturing frozen-thawed human primordial follicles in organ culture.

METHODS

Twelve girls/women donated ovarian tissue. One tissue sample was fixed immediately after thawing (uncultured samples). Slices were cultured for 2 weeks on either Matrigel or on alginate scaffolds with a serum-free culture medium. Growth evaluation consisted of follicular counts and classification, immunohistochemistry and measurement of 17β-Estradiol (E(2)) production.

RESULTS

The number of developing follicles was significantly higher in alginate scaffold-cultured samples than on Matrigel with a concomitant decrease in the number of primordial follicles in alginate scaffold-cultured samples than uncultured samples. The number of atretic follicles after 1 week was significantly higher in the Matrigel-cultured samples than in the alginate scaffold cultured samples. E(2) production was similar in both groups.

CONCLUSIONS

Three dimensional alginate scaffolds are a promising putative in vitro technology for developing human primordial follicles.

Tissue engineering in urology

Tissue engineering encompasses a multidisciplinary approach geared toward the development of biological substitutes designed to restore and maintain normal function in diseased or injured tissues. This article reviews the basic technology that is used to generate implantable tissue-engineered grafts in vitro that will exhibit characteristics in vivo consistent with the physiology and function of the equivalent healthy tissue. We also examine the current trends in tissue engineering designed to tailor scaffold construction, promote angiogenesis and identify an optimal seeded cell source. Finally, we describe several currently applied therapeutic modalities that use a tissue-engineered construct. While notable progress has clearly been demonstrated in this emerging field, these efforts have not yet translated into widespread clinical applicability. With continued development and innovation, there is optimism that the tremendous potential of this field will be realized.

Incorporation of PLGA nanoparticles into porous chitosan-gelatin scaffolds: influence on the physical properties and cell behavior

Bone regeneration can be accelerated by localized delivery of appropriate growth factors/biomolecules. Localized delivery can be achieved by a 2-level system: (i) incorporation of biomolecules within biodegradable particulate carriers (nanoparticles), and (ii) inclusion of such particulate carriers (nanoparticles) into suitable porous scaffolds. In this study, freeze-dried porous chitosan-gelatin scaffolds (CH-G: 1:2 ratio by weight) were embedded with various amounts of poly(lactide-co-glycolide) (PLGA) nanoparticles, precisely 16.6%, 33.3% and 66.6% (respect to CH-G weight). Scaffolds loaded with PLGA nanoparticles were subjected to physico-mechanical and biological characterizations including morphological analysis, swelling and dissolution tests, mechanical compression tests and cell viability tests. Results showed that incorporation of PLGA nanoparticles into porous crosslinked CH-G scaffolds: (i) changed the micro-architecture of the scaffolds in terms of mean pore diameter and pore size distribution, (ii) reduced the dissolution degree of the scaffolds, and (iii) increased the compressive modulus. On the other hand, the water uptake behavior of CH-G scaffolds containing PLGA nanoparticles significantly decreased. The incorporation of PLGA nanoparticles did not affect the biocompatibility of CH-G scaffolds.

Vascularization is the key challenge in tissue engineering

The main limitation in engineering in vitro tissues is the lack of a sufficient blood vessel system - the vascularization. In vivo almost all tissues are supplied by these endothelial cell coated tubular networks. Current strategies to create vascularized tissues are discussed in this review. The first strategy is based on the endothelial cells and their ability to form new vessels known as neoangiogenesis. Herein prevascularization techniques are compared to approaches in which biomolecules, such as growth factors, cytokines, peptides and proteins as well as cells are applied to generate new vessels. The second strategy is focused on scaffold-based techniques. Naturally-derived scaffolds, which contain vessels, are distinguished from synthetically manufactured matrices. Advantages and pitfalls of the approaches to create vascularized tissues in vitro are outlined and feasible future strategies are discussed.

Biodegradable insulin-loaded PLGA microspheres fabricated by three different emulsification techniques: investigation for cartilage tissue engineering

Growth, differentiation and migration factors facilitate the engineering of tissues but need to be administered with defined gradients over a prolonged period of time. In this study insulin as a growth factor for cartilage tissue engineering and a biodegradable PLGA delivery device were used. The aim was to investigate comparatively three different microencapsulation techniques, solid-in-oil-in-water (s/o/w), water-in-oil-in-water (w/o/w) and oil-in-oil-in-water (o/o/w), for the fabrication of insulin-loaded PLGA microspheres with regard to protein loading efficiency, release and degradation kinetics, biological activity of the released protein and phagocytosis of the microspheres. Insulin-loaded PLGA microspheres prepared by all three emulsification techniques had smooth and spherical surfaces with a negative zeta potential. The preparation technique did not affect particle degradation nor induce phagocytosis by human leukocytes. The delivery of structurally intact and biologically active insulin from the microspheres was shown using circular dichroism spectroscopy and a MCF7 cell-based proliferation assay. However, the insulin loading efficiency (w/o/w about 80%, s/o/w 60%, and o/o/w 25%) and the insulin release kinetics were influenced by the microencapsulation technique. The results demonstrate that the w/o/w microspheres are most appropriate, providing a high encapsulation efficiency and low initial burst release, and thus these were finally used for cartilage tissue engineering. Insulin released from w/o/w PLGA microspheres stimulated the formation of cartilage considerably in chondrocyte high density pellet cultures, as determined by increased secretion of proteoglycans and collagen type II. Our results should encourage further studies applying protein-loaded PLGA microspheres in combination with cell transplants or cell-free in situ tissue engineering implants to regenerate cartilage.

Bioengineered scaffolds for spinal cord repair

Spinal cord injury can lead to devastating and permanent loss of neurological function, affecting all levels below the site of trauma. Unfortunately, the injured adult mammalian spinal cord displays little regenerative capacity and little functional recovery in large part due to a tissue environment that is nonpermissive for regenerative axon growth. Artificial tissue repair scaffolds may provide a physical guide to allow regenerative axon growth that bridges the lesion cavity and restores functional neural connectivity. By integrating different strategies, including the use of various biomaterials and microstructures as well as incorporation of bioactive molecules and living cells, combined or synergistic effects for spinal cord repair through regenerative axon growth may be achieved. This article briefly reviews the development of bioengineered scaffolds for spinal cord repair, focusing on spinal cord injury and the subsequent cellular response, scaffold materials, fabrication techniques, and current therapeutic strategies. Key issues and challenges are also identified and discussed along with recommendations for future research.

In vitro study in stimulating the secretion of angiogenic growth factors of strontium-doped calcium polyphosphate for bone tissue engineering

Angiogenesis of tissue-engineered bone remains a limited factor for the engineering of larger bone tissue constructs. Attempts to stimulate angiogenesis, using recombinant protein or gene transfer of angiogenic growth factors, have been proposed; however, these approaches have been associated with some problems regarding such as complex technique, expensive prices as well as safety problems and short half-life of angiogenic growth factors. This study was performed to determine the ability of strontium-doped calcium polyphosphate (SCPP) to induce angiogenesis via researching its effect on the mRNA expressions and protein secretion of VEGF and bFGF in/from cultured osteoblasts (ROS17/2.8 cells). We cultured osteoblasts with SCPP scaffolds containing various doses of strontium as well as calcium polyphosphate (CPP) scaffold. Through the detection of MTT and SEM, we have found that SCPP could promote cell proliferation and maintain their morphology. The results of RT-PCR and ELISA indicated that, compared with those in CPP group, the mRNA expression as well as protein levels of VEGF and bFGF in/from cultured osteoblasts were dose-dependent increasing in response to increasing strontium before reaching the peak in SCPP groups, and 8% SCPP showed the optimal promoting role. Therefore, SCPP containing proper dose of strontium could be served as a potential biomaterial with stimulating angiogenesis in bone tissue engineering and bone repair.

Culture media for the differentiation of mesenchymal stromal cells

Mesenchymal stromal cells (MSCs) can be isolated from various tissues such as bone marrow aspirates, fat or umbilical cord blood. These cells have the ability to proliferate in vitro and differentiate into a series of mesoderm-type lineages, including osteoblasts, chondrocytes, adipocytes, myocytes and vascular cells. Due to this ability, MSCs provide an appealing source of progenitor cells which may be used in the field of tissue regeneration for both research and clinical purposes. The key factors for successful MSC proliferation and differentiation in vitro are the culture conditions. Hence, we here summarize the culture media and their compositions currently available for the differentiation of MSCs towards osteogenic, chondrogenic, adipogenic, endothelial and vascular smooth muscle phenotypes. However, optimal combination of growth factors, cytokines and serum supplements and their concentration within the media is essential for the in vitro culture and differentiation of MSCs and thereby for their application in advanced tissue engineering.

Development of functional fibrous matrices for the controlled release of basic fibroblast growth factor to improve therapeutic angiogenesis

In this study, novel fibrous matrices were developed as a depot to store and liberate growth factors in a controlled manner. Specifically, heparin was covalently conjugated onto the surface of fibrous matrices (composites of poly[caprolactone] and gelatin crosslinked with genipin), and basic fibroblast growth factor (bFGF) was then reversibly immobilized. The immobilization of bFGF was controlled as a function of the amount of conjugated heparin. The sustained release of bFGF from the fibrous matrices was successfully achieved over 4 weeks whereas physical adsorption of bFGF released quickly. The bFGF released from the fibrous matrices significantly enhanced in vitro proliferation of human umbilical vein endothelial cells. From the in vivo study, the group implanted with a higher amount of immobilized bFGF significantly facilitated neo-blood vessel formation as compared with other implantation groups. These results indicate that the sustained release of bFGF is important for the formation of blood vessels and that our fibrous matrices could be useful for regulation of tissue damage requiring angiogenesis. Further, our system can be combined with other growth factors with heparin binding domains, representing a facile depot for spatiotemporal control over the delivery of bioactive molecules in regenerative medicine.

Heparin-functionalized collagen matrices with controlled release of basic fibroblast growth factor

Tissue engineering scaffolds with controlled long-term release of growth factors are constructed in an attempt to mimic the intelligent ability of the extracellular matrix (ECM) to release endogenous growth factors. In this study, collagen sponges (Collagen group) were modified by N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) crosslinking (EDC/NHS group) and heparin immobilization (EDC/NHS-H group), and subsequently seeded with human umbilical vein endothelial cells (HUVECs). Native and modified sponges were pre-adsorbed with basic fibroblast growth factor (bFGF) to evaluate the sustained release and bioactive maintenance of bFGF from the sponges. We found that modified collagen matrices permitted HUVECs to proliferate and migrate well and to distribute uniformly. The EDC/NHS-H group exhibited an excellent sustained-release profile and bioactive maintenance of the pre-adsorbed bFGF as compared with the Collagen and EDC/NHS groups. These results suggest that heparin-functionalized collagen matrices can support a controlled release of bFGF and thus, have potential as a tissue engineering scaffold.

In vitro models for the evaluation of angiogenic potential in bone engineering

Blood vessels have a fundamental role both in skeletal homeostasis and in bone repair. Angiogenesis is also important for a successful bone engineering. Therefore, scaffolds should be tested for their ability to favour endothelial cell adhesion, proliferation and functions. The type of endothelial cell to use for in vitro assays should be carefully considered, because the properties of these cells may depend on their source. Morphological and functional relationships between endothelial cells and osteoblasts are evaluated with co-cultures, but this model should still be standardized, particularly for distinguishing the two cell types. Platelet-rich plasma and recombinant growth factors may be useful for stimulating angiogenesis.

The effect of immobilized RGD peptide in alginate scaffolds on cardiac tissue engineering

Cardiac tissue engineering aims to regenerate damaged myocardial tissues by applying heart patches created in vitro. The present study was undertaken to explore the possible role of matrix-attached RGD peptide in the engineering of cardiac tissue within macroporous scaffolds. Neonatal rat cardiac cells were seeded into RGD-immobilized or unmodified alginate scaffolds. The immobilized RGD peptide promoted cell adherence to the matrix, prevented cell apoptosis and accelerated cardiac tissue regeneration. Within 6 days, the cardiomyocytes reorganized their myofibrils and reconstructed myofibers composed of multiple cardiomyocytes in a typical myofiber bundle. The nonmyocyte cell population, mainly cardiofibroblasts, benefited greatly from adhering to the RGD-alginate matrix and consequently supported the cardiomyocytes. They often surrounded bundles of cardiac myofibers in a manner similar to that of native cardiac tissue. The benefits of culturing the cardiac cells in RGD-immobilized alginate scaffolds were further substantiated by Western blotting, revealing that the relative expression levels of α-actinin, N-cadherin and connexin-43 were better maintained in cells cultured within these scaffolds. Collectively, the immobilization of RGD peptide into macroporous alginate scaffolds proved to be a key parameter in cardiac tissue engineering, contributing to the formation of functional cardiac muscle tissue and to a better preservation of the regenerated tissue in culture.

A novel composite construct increases the vascularization potential of PEG hydrogels through the incorporation of large fibrin ribbons

Developing a mechanism to vascularize tissue-engineered constructs is imperative for transplant function and integration, particularly when delivering hypoxia-sensitive tissues, such as pancreatic islets. Previous efforts have focused on bulk modifications of scaffold materials rendering the entire construct permissive to vessel penetration or the formation of a porous structure where vessels can infiltrate the empty spaces. Here, we describe a novel construct composed of large fibrin ribbons encapsulated within a poly(ethylene glycol) (PEG) hydrogel. The PEG/fibrin ribbon composite scaffold facilitates coculture of adhesive and nonadhesive cell types, thus providing closely neighboring environments with distinct material properties specific to the needs of two clinically relevant cell populations. This advantage is demonstrated here by the successful coculture of pancreatic islets in the PEG component and vessel-forming endothelial cells in entrapped fibrin ribbons. Transplanted endothelial cells can form anastomosies with host vasculature, suggesting that our cocultures may lead to more rapid scaffold vascularization. Additionally, we show that surface-seeded endothelial cells form multicellular projections that migrate into nonadhesive PEG hydrogels along permissive fibrin ribbons, further demonstrating composite construct vascularization potential. Distribution of large fibrin ribbons throughout PEG hydrogels provide a potential mechanism for vascularization of a well-established biomaterial without inherently changing its desirable properties.

Bone formation and neovascularization mediated by mesenchymal stem cells and endothelial cells in critical-sized calvarial defects

Bone represents a highly dynamic tissue whose development is strongly dependent on vasculogenic and angiogenic processes. Neovascularization also plays an important role in fracture healing and in tissue engineering applications aiming at restoring bone function. We have previously shown in a heterotopic subcutaneous implantation model of severe combined immunodeficiency (SCID) mice that implanted human umbilical vein endothelial cells (HUVECs) gave rise to the formation of a complex functional human neovasculature. In this study, we investigated the effect of HUVEC coimplantation on mesenchymal stem cell (MSC)-mediated bone regeneration in an orthotopic calvarial bone defect model in immunocompromised mice. For this purpose, human fibrin/Matrigel-immobilized HUVECs and MSCs were seeded alone or in combination into scaffolds consisting of decalcified processed bovine cancellous bone (Tutobone) and implanted into calvarial critical-sized defects. Our results show that implanted HUVECs formed complex three-dimensional networks of perfused human neovessels that were stabilized by recruiting perivascular cells. Neovessel formation was considerably higher in the coimplantation group, suggesting that implanted MSCs supported HUVEC-triggered neovascularization. In addition, implanted MSCs effectively supported bone formation in calvarial defects. However, the HUVEC-derived neovasculature did not improve MSC-triggered bone regeneration in this orthotopic critical-sized defect model.

Fibroblast growth factors: biology, function, and application for tissue regeneration

Fibroblast growth factors (FGFs) that signal through FGF receptors (FGFRs) regulate a broad spectrum of biological functions, including cellular proliferation, survival, migration, and differentiation. The FGF signal pathways are the RAS/MAP kinase pathway, PI3 kinase/AKT pathway, and PLCγ pathway, among which the RAS/MAP kinase pathway is known to be predominant. Several studies have recently implicated the in vitro biological functions of FGFs for tissue regeneration. However, to obtain optimal outcomes in vivo, it is important to enhance the half-life of FGFs and their biological stability. Future applications of FGFs are expected when the biological functions of FGFs are potentiated through the appropriate use of delivery systems and scaffolds. This review will introduce the biology and cellular functions of FGFs and deal with the biomaterials based delivery systems and their current applications for the regeneration of tissues, including skin, blood vessel, muscle, adipose, tendon/ligament, cartilage, bone, tooth, and nerve tissues.

Fibroblast and vascular endothelial growth factor coating of decellularized vascular grafts stimulates undesired giant cells and graft encapsulation in a rat model

Replacing an infected prosthesis with a bioimplant provides a hopeful alternative in septic vascular surgery. The objective of this study was to determine the effect of fibroblast endothelial growth factors (FGF) and vascular endothelial growth factors (VEGF) coating on a decellularized vascular graft in a rat model and the possible impact on recellularization processes. Rat aortas were decellularized, crosslinked with genipin, and coated with poly-(D, L) lactide containing either FGF or VEGF. Observation periods were 6 and 12 weeks. Surprisingly, we found moderate accumulation of giant cells around the grafts that contained poly-(D, L) lactide acid. FGF and VEGF grafts showed massive stimulation of giant cells and eosinophils leading to complete graft encapsulation (P < 0.05). Pseudointmal hyperplasia was significantly increased in the FGF group (P < 0.05). Both results can only be interpreted as very negative. We achieved a situation in diametric opposition to that which we had hoped for. These data demonstrate that the use of growth factors may produce harmful side effects.

Release kinetics and in vitro bioactivity of basic fibroblast growth factor: effect of the thickness of fibrous matrices

In this study, we fabricated non-woven matrices using blends of polycaprolactone and gelatin with various spinning volumes to control the immobilized heparin content, which was ultimately intended to increase the immobilization efficiency of bFGF. The amount of bFGF on the heparin conjugated fibrous matrices depended on the thicknesses of the swollen matrices ranging from 35.4 ± 6.5 to 162.3 ± 14.0 ng and ≈90% of the bFGF was gradually released over a period of up to 56 d. The released bFGF enhanced the proliferation of human umbilical vein endothelial cells and human mesenchymal stem cells. In conclusion, our heparin-conjugated fibrous matrices have the potential to be used as a growth factor delivery system in tissue engineering applications.

The effect of immobilization of heparin and bone morphogenic protein-2 (BMP-2) to titanium surfaces on inflammation and osteoblast function

The aim of this study was to investigate biologic function of bone morphorgenic protein-2 (rhBMP-2) immobilized on the heparin-grafted Ti surface. Ti surfaces were first modified by 3-aminopropyltriethoxysilane (ATPES), followed by grafting of heparin. BMP-2 was then immobilized on the heparin-grafted Ti surfaces. Pristine Ti and functionalized Ti surfaces were characterized by X-ray photoelectron spectroscopy (XPS), measurement of water contact angles, and protein adsorption. The biological activity of MG-63 cells on pristine and functionalized Ti surfaces was investigated by cell proliferation assays, measurement of alkaline phosphate (ALP) activity, and determination of calcium deposition. Anti-inflammatory effects were assessed by RT-PCR to measure the transcript levels of IL-6 and TNF-α. XPS revealed that heparin and BMP-2 were successfully grafted and immobilized on the Ti surfaces, respectively. In addition, Ti surfaces with BMP-2 immobilized were more hydrophilic than pristine Ti. Furthermore, BMP-2 immobilized Ti promoted significantly higher ALP activity and calcium deposition by MG-63 cells than pristine Ti. The inflammatory response was also decreased when cells were grown on heparin-grafted, BMP-2-immobilized Ti surfaces. The results of this study suggest that by grafting heparin and immobilizing BMP-2 on Ti surfaces, inflammation can be inhibited and osteoblast function promoted.

Stromal cell-induced immune regulation in a transplantable lymphoid-like cell constructs

Engineering of cell-based constructs for treating a variety of immune-related diseases by local transplantation of the cells in a pre-designed matrix is an emerging therapeutic approach, which can potentially reduce the side effects associated with systemic cell injection. Stromal cells have been shown to exert immunosuppressive properties and thus can be exploited for autoimmune regulation and cell transplantation. Here, we demonstrate the fabrication of a stromal cell-based construct, which serves as a lymphoid-like organ with immune regulatory characteristics. In the proposed system, stromal cells are co-seeded with dendritic cells (DC) in a macro-porous alginate scaffold containing the encephalitogenic myelin-derived peptide, proteolipid protein (PLP). We demonstrate that the presence of stromal cells attenuates DC maturation upon lipopolysaccharide stimulus. In vitro, we show that while the migration of pathogenic PLP-specific T cells to construct cultivated with or without stromal cells does not differ, their activation and proliferation are significantly suppressed in the presence of stromal cells. Upon in vivo transplantation, under the kidney capsule of mice, the pathogenic activation and proliferation of T cells which were drawn into the construct were suppressed in the co-seeded constructs. This system thus serves as a lymphoid-like organ with regulatory characteristics, which can be applied for local tolerance induction, for application in cell transplantations as well as autoimmune diseases.

Vascularization--the conduit to viable engineered tissues

Long-term viability of thick three-dimensional engineered tissue constructs is a major challenge. Addressing it requires development of vessel-like network that will allow the survival of the construct in vitro and its integration in vivo owing to improved vascularization after implantation. Resulting from work of various research groups, several approaches were developed aiming engineered tissue vascularization: (1) embodiment of angiogenesis growth factors in the polymeric scaffolds for prolonged release, (2) coculture of endothelial cells with target tissue cells and angiogenesis signaling cells, (3) use of microfabrication methods for creating designed channels for allowing nutrients to flow and/or for directing endothelial cells attachment, and (4) decellularization of organs and blood vessels for creating extracellular matrix. A synergistic effect is expected by combining several of these approaches as already demonstrated in some of the latest studies. Current paper reviews the progress in each approach and recent achievements toward vascularization of engineered tissues.

Harnessing systems biology approaches to engineer functional microvascular networks

Microvascular remodeling is a complex process that includes many cell types and molecular signals. Despite a continued growth in the understanding of signaling pathways involved in the formation and maturation of new blood vessels, approximately half of all compounds entering clinical trials will fail, resulting in the loss of much time, money, and resources. Most pro-angiogenic clinical trials to date have focused on increasing neovascularization via the delivery of a single growth factor or gene. Alternatively, a focus on the concerted regulation of whole networks of genes may lead to greater insight into the underlying physiology since the coordinated response is greater than the sum of its parts. Systems biology offers a comprehensive network view of the processes of angiogenesis and arteriogenesis that might enable the prediction of drug targets and whether or not activation of the targets elicits the desired outcome. Systems biology integrates complex biological data from a variety of experimental sources (-omics) and analyzes how the interactions of the system components can give rise to the function and behavior of that system. This review focuses on how systems biology approaches have been applied to microvascular growth and remodeling, and how network analysis tools can be utilized to aid novel pro-angiogenic drug discovery.

Enhanced angiogenesis of gene-activated dermal equivalent for treatment of full thickness incisional wounds in a porcine model

Angiogenesis of dermal equivalent is one of the key issues for treatment of full thickness skin defects. To develop a gene-activated bilayer dermal equivalent (BDE), N,N,N-trimethyl chitosan chloride (TMC), a cationic gene delivery vector, was used to form complexes with the plasmid DNA encoding vascular endothelial growth factor-165 (VEGF-165), which was then incorporated into a collagen-chitosan/silicone membrane scaffold. To evaluate the angiogenesis property in vivo, full thickness skin defects were made on the back of pigs, into which the TMC/pDNA-VEGF complexes loaded BDE and other three control BDEs, i.e. the blank BDE, and the BDEs loaded with pDNA-VEGF and TMC/pDNA-eGFP complexes, respectively, were transplanted. Biopsy specimens were harvested at day 7, 10 and 14 after surgery for histology, immunohistochemistry, immunofluorescence, real-time quantitative PCR (RT-qPCR) and western blotting analyses. The results showed that the TMC/pDNA-VEGF group had the strongest VEGF expression in mRNA and protein levels, resulting in the highest densities of newly-formed and mature vessels. The ultra-thin skin graft was further transplanted onto the dermis regenerated by the TMC/pDNA-VEGF complexes loaded BDE at day 10 and well survived. At 112 days grafting, the healing skin had a similar structure and approximately 80% tensile strength of the normal skin.

A G-CSF functionalized scaffold for stem cells seeding: a differentiating device for cardiac purposes

Myocardial infarction and its consequences represent one of the most demanding challenges in cell therapy and regenerative medicine. Transfer of skeletal myoblasts into decompensated hearts has been performed through intramyocardial injection. However, the achievements of both cardiomyocyte differentiation and precise integration of the injected cells into the myocardial wall, in order to augment synchronized contractility and avoid potentially life-threatening alterations in the electrical conduction of the heart, still remain a major target to be pursued. Recently, granulocytes colony-stimulating factor (G-CSF) fuelled the interest of researchers for its direct effect on cardiomyocytes, inhibiting both apoptosis and remodelling in the failing heart and protecting from ventricular arrhythmias through the up-regulation of connexin 43 (Cx43). We propose a tissue engineering approach concerning the fabrication of an electrospun cardiac graft functionalized with G-CSF, in order to provide the correct signalling sequence to orientate myoblast differentiation and exert important systemic and local effects, positively modulating the infarction microenvironment. Poly-(L-lactide) electrospun scaffolds were seeded with C2C12 murine skeletal myoblast for 48 hrs. Biological assays demonstrated the induction of Cx43 expression along with morphostructural changes resulting in cell elongation and appearance of cellular junctions resembling the usual cardiomyocyte arrangement at the ultrastructural level. The possibility of fabricating extracellular matrix-mimicking scaffolds able to promote myoblast pre-commitment towards myocardiocyte lineage and mitigate the hazardous environment of the damaged myocardium represents an interesting strategy in cardiac tissue engineering.

Novel synthesis strategies for natural polymer and composite biomaterials as potential scaffolds for tissue engineering

Recent developments in tissue engineering approaches frequently revolve around the use of three-dimensional scaffolds to function as the template for cellular activities to repair, rebuild and regenerate damaged or lost tissues. While there are several biomaterials to select as three-dimensional scaffolds, it is generally agreed that a biomaterial to be used in tissue engineering needs to possess certain material characteristics such as biocompatibility, suitable surface chemistry, interconnected porosity, desired mechanical properties and biodegradability. The use of naturally derived polymers as three-dimensional scaffolds has been gaining widespread attention owing to their favourable attributes of biocompatibility, low cost and ease of processing. This paper discusses the synthesis of various polysaccharide-based, naturally derived polymers, and the potential of using these biomaterials to serve as tissue engineering three-dimensional scaffolds is also evaluated. In this study, naturally derived polymers, specifically cellulose, chitosan, alginate and agarose, and their composites, are examined. Single-component scaffolds of plain cellulose, plain chitosan and plain alginate as well as composite scaffolds of cellulose-alginate, cellulose-agarose, cellulose-chitosan, chitosan-alginate and chitosan-agarose are synthesized, and their suitability as tissue engineering scaffolds is assessed. It is shown that naturally derived polymers in the form of hydrogels can be synthesized, and the lyophilization technique is used to synthesize various composites comprising these natural polymers. The composite scaffolds appear to be sponge-like after lyophilization. Scanning electron microscopy is used to demonstrate the formation of an interconnected porous network within the polymeric scaffold following lyophilization. It is also established that HeLa cells attach and proliferate well on scaffolds of cellulose, chitosan or alginate. The synthesis protocols reported in this study can therefore be used to manufacture naturally derived polymer-based scaffolds as potential biomaterials for various tissue engineering applications.

A novel alginate hollow fiber bioreactor process for cellular therapy applications

Gel-matrix culture environments provide tissue engineering scaffolds and cues that guide cell differentiation. For many cellular therapy applications such as for the production of islet-like clusters to treat Type 1 diabetes, the need for large-scale production can be anticipated. The throughput of the commonly used nozzle-based devices for cell encapsulation is limited by the rate of droplet formation to approximately 0.5 L/h. This work describes a novel process for larger-scale batch immobilization of mammalian cells in alginate-filled hollow fiber bioreactors (AHFBRs). A methodology was developed whereby (1) alginate obstruction of the intra-capillary space medium flow was negligible, (2) extra-capillary alginate gelling was complete and (3) 83 +/- 4% of the cells seeded and immobilized were recovered from the bioreactor. Chinese hamster ovary (CHO) cells were used as a model aggregate-forming cell line that grew from mostly single cells to pancreatic islet-sized spheroids in 8 days of AHFBR culture. CHO cell growth and metabolic rates in the AHFBR were comparable to small-scale alginate slab controls. Then, the process was applied successfully to the culture of primary neonatal pancreatic porcine cells, without significant differences in cell viability compared with slab controls. As expected, alginate-immobilized culture in the AHFBR increased the insulin content of these cells compared with suspension culture. The AHFBR process could be refined by adding matrix components or adapted to other reversible gels and cell types, providing a practical means for gel-matrix assisted cultures for cellular therapy.

Vascularization of wide pore agarose-gelatin cryogel scaffolds implanted subcutaneously in diabetic and non-diabetic mice

Polymeric scaffolds have been reported to promote angiogenesis, facilitating oxygen delivery; however, little is known about the effect of diabetes on the neo-vascularization of implanted polymeric scaffolds at subcutaneous (SC) sites. In this study we compare the effect of diabetes on scaffold vascularization following SC implantation into diabetic and non-diabetic mice. Wide pore agarose cryogel scaffolds with grafted gelatin were prepared by a two-step freezing procedure and subsequent thawing. The scaffolds were implanted subcutaneously into streptozoticin-induced diabetic mice and control, non-diabetic mice. The vascularization process was estimated using histological sections, in which endothelial cells were identified by Von Willebrand factor (vWF) and CD31 antigen staining and the pericyte layer was confirmed by alpha-smooth muscle actin (alpha-SMA) visualization. Comparative analysis showed a similar thickness of fibrous capsules around the vascularized scaffolds in both diabetic and non-diabetic animals. Intensive staining for alpha-SMA indicated the formation of mature blood vessels in the surrounding fibrous capsule and tissue invading the scaffold area. No statistically significant differences in capillary density and area occupied by blood vessels were found between diabetic and non-diabetic mice. In conclusion, the present study shows no adverse effects of diabetes on new blood vessel formation in SC implanted agarose cryogel scaffolds with grafted gelatin.

Triggered instability of liposomes bound to hydrophobically modified core-shell PNIPAM hydrogel beads

The ability to trigger a destabilization of the membrane integrity of liposomes bound to environmentally sensitive hydrophobically modified core-shell hydrogel beads is demonstrated. Hydrogel beads with a core composed of poly(N-isopropylacrylamide) lightly cross-linked with bisacrylamide (BA) (pNIPAM) and a shell composed of NIPAM highly cross-linked with BA and containing varying amounts of acrylic acid (AA) [p(NIPAM-co-AA)] undergo a volume phase transition (VPT) at approximately 32 degrees C, as determined from (1)H magic angle spinning (MAS) NMR, regardless of the AA content of the shell. When the shell was hydrophobically modified with either decylamine or tetradecylamine, binding of extruded large unilamellar vesicles (eLUVs) composed of 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) was quantitative, as determined via fluorescence spectroscopy. Fluorescence microscopy showed that such bound eLUVs did not fuse. Hydrogel-bound eLUV membrane permeability was assessed using (31)P MAS NMR in the presence of the chemical shift agent praseodymium and demonstrated that only at lower degrees of hydrophobic modification of the core-shell hydrogels was eLUV membrane barrier integrity maintained when T < VPT. At a low degree of hydrophobic modification, cycling the temperature above the VPT even for short periods caused the eLUV membranes to become leaky. Hence, eLUV membrane permeability was coupled to the hydrogel VPT, a situation that would be useful in applications requiring triggered release of liposomal contents.

Vascularization strategies for tissue engineering

Tissue engineering is currently limited by the inability to adequately vascularize tissues in vitro or in vivo. Issues of nutrient perfusion and mass transport limitations, especially oxygen diffusion, restrict construct development to smaller than clinically relevant dimensions and limit the ability for in vivo integration. There is much interest in the field as researchers have undertaken a variety of approaches to vascularization, including material functionalization, scaffold design, microfabrication, bioreactor development, endothelial cell seeding, modular assembly, and in vivo systems. Efforts to model and measure oxygen diffusion and consumption within these engineered tissues have sought to quantitatively assess and improve these design strategies. This review assesses the current state of the field by outlining the prevailing approaches taken toward producing vascularized tissues and highlighting their strengths and weaknesses.

RGD modified PLGA/gelatin microspheres as microcarriers for chondrocyte delivery

Poly(lactide-co-glycotide) (PLGA)/gelatin composite microspheres were prepared by an emulsion solvent evaporation technique. RGDS peptides were further immobilized under the catalyzation of water soluble carbodiimide (EDAC). Confocal laser scanning microscopy and transmission electron microscopy revealed that the gelatin was entrapped in the PLGA/gelatin microspheres with a manner of separated domains. The contents of the entrapped gelatin and immobilized RGDS peptides were quantified as 0.9 mg/20 mg and approximately 2.1 microg/20 mg microspheres by hydroxyproline analysis and bicinchoninic acid protein assay, respectively. Moreover, difference in morphology of PLGA, PLGA/gelatin and RGDS modified PLGA/gelatin (PLGA/gelatin-RGDS) microspheres was observed by scanning electron microscopy. The PLGA/gelatin and PLGA/gelatin-RGDS microspheres lost their weight rapidly in PBS, but slowly in DMEM/fetal bovine serum. Rabbit auricular chondrocytes were seeded onto the microspheres in vitro to assess their biological performance and applicability as cell carriers. Results show that amongst the PLGA, PLGA/gelatin and PLGA/gelatin-RGDS microspheres, the latter ones have the best performance in terms of chondrocyte attachment, proliferation, viability and sulfated glycosaminoglycans secretion.

Naturally derived materials-based cell and drug delivery systems in skin regeneration

The objective of regenerative medicine is to provide cells with a local environment of artificial extracellular matrix where they can proliferate and differentiate efficiently and therefore, induce the repair of defective tissues according to the natural healing potential of patients. For this purpose, naturally derived materials are being widely used because of their similarities to the extracellular matrix, typically good biocharacteristics and inherent cellular interaction. Also, natural polymers can be engineered to release growth factors and related agents in response to physiologic signals to imitate the natural healing process and to promote fast tissue regeneration and reduce scarring in wounds. Although synthetic materials have been used extensively in tissue engineering fields, this review illustrates the contribution of natural materials and natural materials-based protein delivery systems to regenerative medicine research, with emphasis on the application of multifunctional vehicles for cell and growth factor delivery in skin regeneration research.

Controlled growth factor delivery for tissue engineering

Growth factors play a crucial role in information transfer between cells and their microenvironment in tissue engineering and regeneration. They initiate their action by binding to specific receptors on the surface of target cells and the chemical identity, concentration, duration, and context of these growth factors contain information that dictates cell fate. Hence, the importance of exogenous delivery of these molecules in tissue engineering is unsurprising, considering their importance for tissue regeneration. However, the short half-lives of growth factors, their relatively large size, slow tissue penetration, and their potential toxicity at high systemic levels, suggest that conventional routes of administration are unlikely to be effective. In this review, we provide an overview of the design criteria for growth factor delivery vehicles with respect to the growth factor itself and the microenvironment for delivery. We discuss various methodologies that could be adopted to achieve this localized delivery, and strategies using polymers as delivery vehicles in particular.

Effect of platelet-rich plasma and latissimus dorsi muscle flap on osteogenesis and vascularization of tissue-engineered bone in dogs

PURPOSE

The present study evaluated the effects of platelet-rich plasma (PRP) and the latissimus dorsi muscle flap on osteogenesis and vascularization of tissue-engineered bone.

MATERIALS AND METHODS

Bone marrow stromal cells (BMSCs) were subcultured, and PRP was obtained from the same dogs. Demineralized bone matrix (DBM) was prepared from homologous bone. The complexes of DBM/BMSCs/PRP were implanted into areas A and B on the left side of the dogs' backs; complexes of DBM/BMSCs without PRP were implanted in areas C and D on the right side of the same dog. The implants in areas A and C were wrapped with a latissimus dorsi muscle flap, and the implants in areas B and D were wrapped with inferior fascia. At 4, 8, and 12 weeks later, the implants were removed for evaluation.

RESULTS

The radiographic evaluation, descriptive histologic analysis, and histologic quantitative analysis showed that the PRP/BMSCs/DBM complex was better than the BMSCs/DBM complex in both vascularization and osteogenesis of the ectopic tissue-engineered bones, and the complex wrapped with the latissimus dorsi muscle flap was better than that packed with superficial fascia without blood vessels.

CONCLUSIONS

The PRP and blood vessels in the latissimus dorsi muscle could cooperatively promote osteogenesis and vascularization in tissue-engineered bone.