Barriers to nonviral gene delivery

A Convergent Synthesis of Homogeneous Reducible Polypeptides

The convergent syntheses of homogeneous disulfide cross-linked polypeptides are reported. Reducible polypeptides were synthesized containing four and eight dodecapeptides in two and three linear conjugation steps. Critical for the convergent methodology was the use of orthogonally protected cysteines as either acetamidomethyl (Acm) or Fmoc-thiazolidine (Thz). Both groups could be selectively deprotected with silver trifluoromethanesulfonate in the presence of internal disulfide bonds using TFA and aqueous conditions, respectively. This approach allows for large, reducible polypeptides to be synthesized in efficient yields and minimizes the number of conjugation steps, allowing the development and optimization of gene delivery polypeptides containing multiple peptide components necessary to overcome the numerous in vivo barriers for efficacious gene delivery.

pH-responsive biodegradable assemblies containing tunable phenyl-substituted vinyl ethers for use as efficient gene delivery vehicles

Novel pH-responsive assemblies (PEG-lipid:DOPE liposomes) containing tunable and bifunctional phenyl-substituted vinyl ether (PIVE) cross-linkers were prepared. The assemblies consisted of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), acid-cleavable poly(ethylene glycol) (PEG)-conjugated lipids, pDNA, and protamine sulfate (PS). The PIVE linkage was designed to hydrolyze under acidic conditions, and the hydrolysis studies of PEG-lipid compounds containing PIVE at pH 4.2, 5.4, and 7.4 indicated that the hydrolysis rates of PIVE linker were influenced by the substitution of electron withdrawing or electron donating groups on the phenyl ring. Acid-catalyzed hydrolysis of PIVE leads to destabilization of the acid labile PEG-PIVE-lipid:DOPE liposomes via dePEGylation, thereby triggering content release. Content release assays showed that dePEGylation was highly pH-dependent and correlated with the PIVE proton affinity of the phenyl group. These results indicated that the dePEGylative triggering based on a new pH-sensitive PIVE linkage can be controlled. In vitro transfection studies on the pH-responsive assemblies containing mPEG-(MeO-PIVE)-conjugated 1,3-dioctadecyl-rac-glycerol lipids (mPEG-(MeO-PIVE])-DOG) showed higher transfection efficiency compared to that of polyethylenimine (PEI), a positive control, on HEK 293 and COS-7 cells. In addition, lower cytotoxicity of PEG-PIVE-lipid:DOPE liposomes/PS/DNA was observed in comparison to PEI. These results suggest that PEG-PIVE-lipid:DOPE liposomes can be considered as nonviral vehicles for drug and gene delivery applications.

Noncovalently associated cell-penetrating peptides for gene delivery applications

The use of various cell-penetrating peptides (CPPs) to deliver genetic material for gene therapy applications has been a topic of interest for more than 20 years. The delivery of genetic material by using CPPs can be divided into two categories: covalently bound and electrostatically bound. Complexity of the synthesis procedure can be a significant barrier to translation when using a strategy requiring covalent binding of CPPs. In contrast, electrostatically complexing CPPs with genetic material or with a viral vector is relatively simple and has been demonstrated to improve gene delivery in both in vitro and in vivo studies. This review highlights gene therapy applications of complexes formed noncovalently between CPPs and genetic material or viruses.

Polyarginine molecular weight determines transfection efficiency of calcium condensed complexes

Cell penetrating peptides (CPPs) have been extensively studied in polyelectrolyte complexes as a means to enhance the transfection efficiency of plasmid DNA (pDNA). Increasing the molecular weight of CPPs often enhances gene expression but poses a risk of increased cytotoxicity and immunogenicity compared to low molecular weight CCPs. Conversely, low molecular weight CPPs typically have low transfection efficiency due to large complex size. Complexes made using low molecular weight CPPs were found to be condensed to a small size by adding calcium. In this study, complexes of low molecular weight polyarginine and pDNA were condensed with calcium. These complexes showed high transfection efficiency and low cytotoxicity in A549 carcinomic human alveolar basal epithelial cells. The relationships between transfection efficiency and polyarginine size (5, 7, 9, or 11 amino acids), polyarginine/pDNA charge ratios, and calcium concentrations were studied. Polyarginine 7 was significantly more effective than other polyarginines under most formulation conditions, suggesting a link between cell penetration ability and transfection efficiency.

Bioreducible polypeptide containing cell-penetrating sequence for efficient gene delivery

PURPOSE

To design excellent polypeptide-based gene vectors and determine the gene delivery efficiency.

METHODS

Polypeptides (designated as xPolyK6, xPolyK6-R81 and xPolyK6-R82), comprising the DNA condensing and buffering peptide HK6H as well as cell penetrating peptide (CPP) R8 were obtained by the oxidative polymerization of CHK6HC and CR8C at different molar ratios in 4 mL phosphate-buffered saline (PBS) containing 30% (v/v) DMSO at room temperature for 96 h. The cytotoxicity of vectors was studied by MTT assay. Moreover, particle size, zeta potential and morphology along with the in vitro transfection efficiency and cellular uptake of vector/plasmid DNA (pDNA) complexes were characterized at various w/w ratios to determine their potential in gene therapy.

RESULTS

All the vectors presented excellent ability of binding and condensing pDNA, additionally with low cytotoxicity. Simultaneously, transfection efficiency of the vectors appeared apparent dependence on the vector composition. The distinct correlation between the content of CR8C with the transfection efficiency demonstrated the effective improvement in transfection efficacy by the oxidative polymerization. Particularly, xPolyK6-R82 possessed the highest transfection efficiency at a w/w ratio of 50. Furthermore, xPolyK6-R82 also presented the best cellular uptake capability demonstrated by confocal microscopy and flow cytometry.

CONCLUSIONS

Bioreducible polypeptides incorporating with proper amount of CPP are promising as effective non-viral gene vectors in gene therapy.

Synthesis and characterization of N-ethyl-N'-(3-dimethylaminopropyl)-guanidinyl-polyethylenimine polymers and investigation of their capability to deliver DNA and siRNA in mammalian cells

Recent advancements in polymeric gene delivery have raised the potential of gene therapy as treatment for various acquired and inherited diseases. Here, we report on the synthesis and characterization of N-ethyl-N'-(3-dimethylaminopropyl)-guanidinyl-polyethylenimine (sGP) polymers and investigation of their capability to carry DNA and siRNA in vitro. Zinc triflate-mediated activation of primary amines of branched polyethylenimine (bPEI) followed by reaction with varying amounts of N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDAC) resulted in the generation of a small series of trisubstituted guanidinyl-modified polyethylenimine polymers. Determination of primary amines on modified polymers by TNBS assay revealed 62-84% of the attempted conjugation of EDAC onto bPEI. These modified polymers were shown to condense plasmid DNA and retard its mobility on 0.8% agarose gel. Further, these polymers were evaluated for their capability to carry pDNA into the cells by performing transfection assay on various mammalian cells. All the modified polymer/pDNA complexes exhibited significantly higher levels of gene expression with one of the complexes, sGP3/pDNA complex, displayed ~1.45 to 3.0 orders of magnitude higher transfection efficiency than that observed in the native bPEI and the commercial transfection reagent, Lipofectamine™. The efficacy of sGP3 polymer was further assessed by siRNA delivery, which resulted in ~81% suppression of the target gene. In conclusion, these studies demonstrate the potential of these substituted guanidinyl-modified PEIs as efficient gene delivery vectors.

Nanodiamonds as novel nanomaterials for biomedical applications: drug delivery and imaging systems

Detonation nanodiamonds (NDs) are emerging as delivery vehicles for small chemical drugs and macromolecular biotechnology products due to their primary particle size of 4 to 5 nm, stable inert core, reactive surface, and ability to form hydrogels. Nanoprobe technology capitalizes on the intrinsic fluorescence, high refractive index, and unique Raman signal of the NDs, rendering them attractive for in vitro and in vivo imaging applications. This review provides a brief introduction of the various types of NDs and describes the development of procedures that have led to stable single-digit-sized ND dispersions, a crucial feature for drug delivery systems and nanoprobes. Various approaches used for functionalizing the surface of NDs are highlighted, along with a discussion of their biocompatibility status. The utilization of NDs to provide sustained release and improve the dispersion of hydrophobic molecules, of which chemotherapeutic drugs are the most investigated, is described. The prospects of improving the intracellular delivery of nucleic acids by using NDs as a platform are exemplified. The photoluminescent and optical scattering properties of NDs, together with their applications in cellular labeling, are also reviewed. Considering the progress that has been made in understanding the properties of NDs, they can be envisioned as highly efficient drug delivery and imaging biomaterials for use in animals and humans.

Selective gene delivery to cancer cells using an integrated cationic amphiphilic peptide

Gene therapy provides a number of potential treatments that could be applied in clinic to prevent deaths from cancer. However, the transfer of gene therapy to the clinical application has proven difficult because many problems remain to be solved concerning the transfection efficiency, target specificity, and safety issues. To overcome these barriers, a peptide-based vector, K(12)H(6)V(8)SSQHWSYKLRP (KHV-LHRH) that comprises four functional blocks, is studied in this work for the targeted delivery of a model gene drug to cancer cells. KHV-LHRH peptide, which contains a luteinizing hormone-releasing hormone (LHRH) sequence, can specifically target cancer cells expressing LHRH receptors. The gene expression, cytotoxicity, and cellular uptake mediated by this vector were evaluated against MCF-7 human breast cancer cells (LHRH-receptor-positive) and SKOV-3 human ovarian carcinoma cells (LHRH-receptor-negative) and compared to a peptide vector (K(12)H(6)V(8)) (KHV) without the LHRH ligand and poly(ethylenimine) (PEI). The results showed that KHV-LHRH enhanced the DNA internalization and induced significantly higher gene expression than KHV in LHRH-receptor-positive MCF-7 cells. Also, the peptide-based vectors had low cytotoxicity compared to that of PEI. The high specificity and transfection efficiency of the integrated peptide-based vector make it a very promising material for targeted gene delivery in cancer therapy.

Physical non-viral gene delivery methods for tissue engineering

The integration of gene therapy into tissue engineering to control differentiation and direct tissue formation is not a new concept; however, successful delivery of nucleic acids into primary cells, progenitor cells, and stem cells has proven exceptionally challenging. Viral vectors are generally highly effective at delivering nucleic acids to a variety of cell populations, both dividing and non-dividing, yet these viral vectors are marred by significant safety concerns. Non-viral vectors are preferred for gene therapy, despite lower transfection efficiencies, and possess many customizable attributes that are desirable for tissue engineering applications. However, there is no single non-viral gene delivery strategy that "fits-all" cell types and tissues. Thus, there is a compelling opportunity to examine different non-viral vectors, especially physical vectors, and compare their relative degrees of success. This review examines the advantages and disadvantages of physical non-viral methods (i.e., microinjection, ballistic gene delivery, electroporation, sonoporation, laser irradiation, magnetofection, and electric field-induced molecular vibration), with particular attention given to electroporation because of its versatility, with further special emphasis on Nucleofection™. In addition, attributes of cellular character that can be used to improve differentiation strategies are examined for tissue engineering applications. Ultimately, electroporation exhibits a high transfection efficiency in many cell types, which is highly desirable for tissue engineering applications, but electroporation and other physical non-viral gene delivery methods are still limited by poor cell viability. Overcoming the challenge of poor cell viability in highly efficient physical non-viral techniques is the key to using gene delivery to enhance tissue engineering applications.

Ultrasound-mediated gene transfection in vitro: effect of ultrasonic parameters on efficiency and cell viability

Ultrasound (US)-mediated gene transfection in the presence of microbubbles is a recently developed and promising non-viral gene delivery method. Optimising the parameters used in ultrasonic transfection is urgently required in order to realise higher transfection efficiencies in clinical settings. This study examined the effect of ultrasound exposure parameters on plasmid DNA transfection in mouse embryonic fibroblast cell lines using perfluorobutane bubbles. Variations in US intensity (0-11 W/cm2), pulse repetition frequency (PRF, 50-50,000 Hz), duty ratio (10 to 50%), exposure time (0-120 s) and microbubble volume concentration (0 to 10%) were tested, and the microbubble volume concentration was also monitored during exposure. Through the experiments, the mechanism of how variations in parameters influence US-mediated gene transfection was discussed, which can provide a basis for future applications of ultrasound mediated transfection.

Genetic blockage of endocytic pathways reveals differences in the intracellular processing of non-viral gene delivery systems

Detailed understanding of the uptake mechanisms and intracellular processing of nonviral gene delivery systems will allow design of more effective carriers. This work gets insight into the intracellular kinetics of pDNA delivered by polyethyleneimine (PEI), cationic lipid DOTAP and calcium phosphate (CaP) precipitates. Amount of cell- and nuclear-associated pDNA was quantified by qRT-PCR at multiple time points after transfection. Moreover, the impact of specific endocytic pathways on the cell entry and intracellular kinetics of pDNA was studied by inhibition (blockage) of either clathrin- or dynamin-mediated endocytosis by using both genetically manipulated cell lines and chemical inhibitors of endocytosis. Quantitative analysis of defined kinetic parameters revealed that neither cellular nor nuclear uptake of pDNA correlated with transgene expression, emphasizing the importance of the post-nuclear processes in overall transfection efficacy. Changes in transgene expression observed upon blockage of endocytosis was carrier dependent and correlated relatively well with the changes at the cellular and nuclear uptake levels but not with the amount of cell-associated pDNA. Due to low specificity of chemical inhibitors and activation of alternative endocytosis pathways after genetic blockage of endocytosis neither of these methods is optimal for studying the role of endocytosis. Therefore, one should be careful when interpreting the obtained results from such studies and not to trust the data obtained only from one method.

The role of surface chemistry-induced cell characteristics on nonviral gene delivery to mouse fibroblasts

Background

Gene delivery approaches serve as a platform to modify gene expression of a cell population with applications including functional genomics, tissue engineering, and gene therapy. The delivery of exogenous genetic material via nonviral vectors has proven to be less toxic and to cause less of an immune response in comparison to viral vectors, but with decreased efficiency of gene transfer. Attempts have been made to improve nonviral gene transfer efficiency by modifying physicochemical properties of gene delivery vectors as well as developing new delivery techniques. In order to further improve and understand nonviral gene delivery, our approach focuses on the cell-material interface, since materials are known to modulate cell behavior, potentially rendering cells more responsive to nonviral gene transfer. In this study, self-assembled monolayers of alkanethiols on gold were employed as model biomaterial interfaces with varying surface chemistries. NIH/3T3 mouse fibroblasts were seeded on the modified surfaces and transfected using either lipid- or polymer- based complexing agents.

Results

Transfection was increased in cells on charged hydrophilic surfaces presenting carboxylic acid terminal functional groups, while cells on uncharged hydrophobic surfaces presenting methyl terminations demonstrated reduced transfection for both complexing agents. Surface–induced cellular characteristics that were hypothesized to affect nonviral gene transfer were subsequently investigated. Cells on charged hydrophilic surfaces presented higher cell densities, more cell spreading, more cells with ellipsoid morphologies, and increased quantities of focal adhesions and cytoskeleton features within cells, in contrast to cell on uncharged hydrophobic surfaces, and these cell behaviors were subsequently correlated to transfection characteristics.

Conclusions

Extracellular influences on nonviral gene delivery were investigated by evaluating the upregulation and downregulation of transgene expression as a function of the cell behaviors induced by changes in the cells’ microenvronments. This study demonstrates that simple surface modifications can lead to changes in the efficiency of nonviral gene delivery. In addition, statistically significant differences in various surface-induced cell characteristics were statistically correlated to transfection trends in fibroblasts using both lipid and polymer mediated DNA delivery approaches. The correlations between the evaluated complexing agents and cell behaviors (cell density, spreading, shape, cytoskeleton, focal adhesions, and viability) suggest that polymer-mediated transfection is correlated to cell morphological traits while lipid-mediated transfection correlates to proliferative characteristics.

Tyroserleutide-based gene vector for suppressing VEGF expression in cancer therapy

A small interfering RNA (siRNA) plasmid DNA (pYr-1.1-hU6-EGFP-siVEGF) was constructed and used for suppressing vascular endothelial growth factor (VEGF) expression and inhibiting tumor growth. Then, a (tyrosyl-seryl-leucine)-polyethyleneimine-poly(ethylene glycol) (YSL-PEI-PEG) conjugate was designed and synthesized as a gene carrier for the delivery of pYr-1.1-hU6-EGFP-siVEGF plasmid. The therapeutic peptide YSL was conjugated to PEI to improve the anti-cancer efficiency, and the PEG chain was introduced to reduce the serum protein adsorption and improve the stability of the complex in the systemic circulation. It was found that YSL-PEI-PEG could efficiently condense plasmid DNA when the vector/DNA weight ratio was higher than 2. Compared with PEI 25 kDa, YSL-PEI-PEG exhibited higher transfection efficiency and lower cytotoxicity. More importantly, the results showed that the gene delivery system owned strong ability to inhibit cancer cell proliferation in vitro and tumor growth in vivo. YSL-PEI-PEG has great potential as a gene vector for clinical applications.

Stimuli-responsive polymers and nanomaterials for gene delivery and imaging applications

Multiple extra- and intracellular obstacles, including low stability in blood, poor cellular uptake, and inefficient endosomal escape and disassembly in the cytoplasm, have to be overcome in order to deliver nucleic acids for gene therapy. This review introduces the recent advances in tackling the key challenges in achieving efficient, targeted, and safe nonviral gene delivery using various nucleic acid-containing nanomaterials that are designed to respond to various extra- and intracellular biological stimuli (e.g., pH, redox potential, and enzyme) as well as external artificial triggers (e.g., light and ultrasound). Gene delivery in combination with molecular imaging and targeting enables diagnostic assessment, treatment monitoring and quantification of efficiency, and confirmation of cure, thus fulfilling the great promise of efficient and personalized medicine. Nanomaterials platform for combined imaging and gene therapy, nanotheragnostics, using stimuli-responsive materials is also highlighted in this review. It is clear that developing novel multifunctional nonviral vectors, which transform their physico-chemical properties in response to various stimuli in a timely and spatially controlled manner, is highly desired to translate the promise of gene therapy for the clinical success.

Novel gene transfer vectors based on artificial recombinant multi-functional oligopeptides

Viral vectors, except for their safety concern, have shown high efficiency in both delivery and expression of gene. Here, a series of new gene carriers, comprised of short peptide subunits with special functions to imitate viral vectors, were designed and three vectors, (C(18))(2)KH(4)R(8)GDS, AcKH(4)R(8)GDS and (C(18))(2)KH(4)R(8), designated as ARM1, ARM2, ARM3, respectively, were synthesized and evaluated. The transfection efficiency in vitro was studied in terms of 293T, HepG2 and HeLa cell lines. It was found that the transfection efficiency was enhanced significantly for the vectors (ARM1 and ARM3) with double hydrophobic aliphatic tails. Interestingly, the conjugation of RGDS sequence in vectors displayed no obvious difference in cell adhesion for all of the three cell lines. Moreover, confocal laser scanning microscope results indicated that the peptide/pDNA complexes can enter the cell and nuclei successfully. On the other hand, all the vectors displayed low cytotoxicity. The artificial recombinant multi-block oligopeptides (ARMs) demonstrated here might give a promising potential of the peptide-based vectors in gene therapy.

Interplay of cell adhesion matrix stiffness and cell type for non-viral gene delivery

Non-viral gene delivery has the potential to treat a wide array of diseases but has been hindered by limited expression in vivo, possibly due to complex cellular microenvironments at delivery sites. Previous studies have reported that extracellular matrix properties, including stiffness, influence non-viral gene transfection efficiencies. This study reports that the effect of matrix stiffness on non-viral gene delivery differs among cell types due to varying sensitivities to matrix rigidity. Plasmid DNA encoding bone morphogenetic protein (BMP)-2 was delivered to fibroblasts, bone marrow stromal cells, and myoblasts cultured on fibronectin-conjugated poly(ethylene glycol) diacrylate hydrogels with varied elastic moduli, and the cellular uptake and subsequent expression of plasmid DNA were examined. While exogenous BMP-2 expression increased with increasing matrix stiffness for all three cell types, the effects of matrix stiffness were most pronounced for fibroblasts. Mechanistic studies conducted in parallel indicate that matrix stiffness influenced the projected area and nuclear aspect ratio for fibroblasts but had minimal effects on the morphology of bone marrow stromal cells and myoblasts. Overall, we believe that the results of this study will be useful for developing advanced non-viral gene delivery strategies for improved therapeutic efficacy.

A linear-dendritic cationic vector for efficient DNA grasp and delivery

This paper presents an attempt to design an efficient and biocompatible cationic gene vector via structural optimization that favors the efficient utilization of amine groups for DNA condensation. To this end, a linear-dendritic block copolymer of methoxyl-poly(ethylene glycol)-dendritic polyglycerol-graft-tris(2-aminoethyl)amine (mPEG-DPG-g-TAEA) was prepared with specially designed multiple functions including strong DNA affinity, endosomal buffering and expected serum-tolerance. Based on the transfection in serum-free and serum-conditioned media, the influences of the polymer structures including the degree of polymerization of DPG and TAEA substitution degree were explored. As compared to polyethylenimine (M(w)=5 kDa) (PEI5k) with similar molecular weight and higher amine density, mPEG-DPG-g-TAEA displayed comparably high DNA affinity due to the special linear-dendritic architecture. Consequently, at very low N/P ratio, mPEG-DPG-g-TAEA vectors could mediate efficient in vitro luciferase expression at levels that are comparable with or even superior to the commercially available Lipofectamine™ 2000, while being apparently higher than PEI5k. The designed vectors exhibit considerably higher cell biocompatibility and better resistance against bovine serum albumin adsorption than PEI5k. The stability of the complexes on coincubation with heparin was found to be largely dependent on the polymer structure. As concluded from the comparative transfection study in the absence/presence of chloroquine, it is likely that the polycation itself could produce endosomal buffering. This linear-dendritic vector shows promising potential for the application of gene delivery.

New sequence-defined polyaminoamides with tailored endosomolytic properties for plasmid DNA delivery

Heterogeneity of polymeric carriers is one of the most elusive obstacles in the development of nonviral gene delivery systems, concealing interaction mechanisms and limiting the use of structure-activity relationship studies. In this report, novel sequence-defined polyaminoamides, prepared by solid-phase assisted synthesis, were used to establish first structure-activity relationships for polymer-based plasmid DNA delivery. By combining a cationic building block with hydrophobic modifications and bioreversible disulfide cross-linking sites, transfection polymers with tailored lytic and DNA binding properties were designed. These polymers demonstrated clear correlation between structure and performance in lysis and DNA binding assays. In vitro studies showed negligible toxicity and highly efficient gene transfer, demonstrating the potential of this platform in the fast, combinatorial development of new transfection polymers.

Surface-engineered gold nanorods: promising DNA vaccine adjuvant for HIV-1 treatment

With the intense international response to the AIDS pandemic, HIV vaccines have been extensively investigated but have failed due to issues of safety or efficacy in humans. Adjuvants for HIV/AIDS vaccines are under intense research but a rational design approach is still lacking. Nanomaterials represent an obvious opportunity in this field due to their unique physicochemical properties. Gold nanostructures are being actively studied as a promising and versatile platform for biomedical application. Herein, we report novel surface-engineered gold nanorods (NRs) used as promising DNA vaccine adjuvant for HIV treatment. We have exploited the effects of surface chemistry on the adjuvant activity of the gold nanorod by placing three kinds of molecules, that is, cetyltrimethylammonium bromide (CTAB), poly(diallydimethylammonium chloride) (PDDAC), and polyethyleneimine (PEI) on the surface of the nanorod. These PDDAC- or PEI-modified Au NRs can significantly promote cellular and humoral immunity as well as T cell proliferation through activating antigen-presenting cells if compared to naked HIV-1 Env plasmid DNA treatment in vivo. These findings have shed light on the rational design of low-toxic nanomaterials as a versatile platform for vaccine nanoadjuvants/delivery systems.

Galactose decorated acid-labile nanoparticles encapsulating quantum dots for enhanced cellular uptake and subcellular localization

PURPOSE

Biodegradable polymers containing acid-labile segments and galactose grafts were formulated into nanoparticles in current study, and enhanced cellular uptake and subcellular distribution were clarified.

METHODS

Quantum dots (QDs) was utilized as an imaging agent and a model of bioactive substances, and entrapped into nanoparticles of around 200 nm through a nanoprecipitation process.

RESULTS

The acid-labile characteristics of QDs-loaded nanoparticles were approved by the hemolysis capability, the degradation behaviors of matrix polymers, and the fluorescence decay of entrapped QDs after incubation into buffer solutions of different pH values. The galactose grafts increased the acid-lability, due to the hydrophilic moieties on the acid-labile segments, and enhanced uptake efficiency of over 50 % was found after 4 h incubation with HepG2 cells, due to the galactose-receptor mediated endocytosis. The acid-lability led to an efficient endosomal escape of QDs-loaded nanoparticles into cytoplasm.

CONCLUSIONS

The integration of acid-lability, targeting effect, and full biodegradable backbone into nanoparticle matrices constitutes a promising platform for intracellular delivery of bioactive substances for disease diagnosis, imaging and treatment.

Targeted gene delivery to hepatocytes with galactosylated amphiphilic cyclodextrins

Objectives

Achieving targeted delivery of gene medicines is desirable to maximise activity. Here, galactosylated amphiphilic cyclodextrins (CDs) are examined in terms of their ability to transfect asialoglycoprotein receptor-bearing HepG2 cells.

Methods

Cationic amphiphilic CDs were synthesised as well as amphiphilic CDs bearing galactose-targeting ligands with different linker lengths. Binding of galactosylated CDs to a galactose-specific lectin was examined by surface plasmon resonance. CDs were formulated with and without the helper lipid DOPE and complexed with plasmid DNA. Transfection was evaluated by luciferase assay. Intracellular trafficking was assessed by confocal microscopy.

Key findings

Binding of targeted CDs to a galactose-specific lectin was achieved. Binding decreased with linker length between the galactosyl group and the CD core. Contrary to the lectin binding results, transfection levels increased with an increase in linker length from 7 atoms to 15. Compared to non-targeted formulations, a significant increase in transfection was observed only in the presence of the helper lipid DOPE. Confocal microscopy revealed that DOPE caused a pronounced effect on cellular distribution.

Conclusions

The galactose-targeting ligand induced substantial increases in transfection over non-targeted formulations when DOPE was included, indicating the potential for targeted gene delivery using CD-based delivery systems.

Effective gene delivery using stimulus-responsive catiomer designed with redox-sensitive disulfide and acid-labile imine linkers

A dual stimulus-responsive mPEG-SS-PLL(15)-glutaraldehyde star (mPEG-SS-PLL(15)-star) catiomer is developed and biologically evaluated. The catiomer system combines redox-sensitive removal of an external PEG shell with acid-induced escape from the endosomal compartment. The design rationale for PEG shell removal is to augment intracellular uptake of mPEG-SS-PLL(15)-star/DNA complexes in the presence of tumor-relevant glutathione (GSH) concentration, while the acid-induced dissociation is to accelerate the release of genetic payload following successful internalization into targeted cells. Size alterations of complexes in the presence of 10 mM GSH suggest stimulus-induced shedding of external PEG layers under redox conditions that intracellularly present in the tumor microenvironment. Dynamic laser light scattering experiments under endosomal pH conditions show rapid destabilization of mPEG-SS-PLL(15)-star/DNA complexes that is followed by facilitating efficient release of encapsulated DNA, as demonstrated by agarose gel electrophoresis. Biological efficacy assessment using pEGFP-C1 plasmid DNA encoding green fluorescence protein and pGL-3 plasmid DNA encoding luciferase as reporter genes indicate comparable transfection efficiency of 293T cells of the catiomer with a conventional polyethyleneimine (bPEI-25k)-based gene delivery system. These experimental results show that mPEG-SS-PLL(15)-star represents a promising design for future nonviral gene delivery applications with high DNA binding ability, low cytotoxicity, and high transfection efficiency.

Novel pH-sensitive cationic lipids with linear ortho ester linkers for gene delivery

In an effort to develop pH-sensitive lipoplexes for efficient gene delivery, we report three novel cationic lipids containing a linear ortho ester linker that conjugates either the headgroup (Type I) or one hydrocarbon chain (Type II) with the rest of the lipid molecule. The cationic lipids carry either an iodide or a chloride counterion. Compared to our previously reported cyclic ortho ester linker, the linear ortho ester linker facilitated the construction of cationic liposomes and lipoplexes with different helper lipids. The chloride counterion not only facilitated the hydration of the lipid films during liposome construction, but also enhanced the hydrolysis of the ortho ester linker in the lipoplexes. After incubation at endosomal pH 5.5, the Type I lipoplexes aggregated and destabilized the endosome-mimicking model liposomes, but not the Type II lipoplexes. The helper lipids (DOPE or cholesterol) of the lipoplexes enhanced the pH-sensitivity of the Type I lipoplexes. In CV-1 cells (monkey kidney fibroblast), the Type I ortho ester-based lipoplexes, especially those with the chloride counterion, significantly improved the gene transfection efficiency, in some cases by more than 100 fold, compared to their pH-insensitive counterparts consisting of DOTAP. The gene transfection efficiency of the ortho ester-based lipoplexes was well correlated with their rate of aggregation and membrane destabilization in response to the endosomal pH 5.5.

N-hexanoyl, N-octanoyl and N-decanoyl chitosans: Binding affinity, cell uptake, and transfection

Low transfection efficiency of chitosan limits its use as a non-viral vector for practical purposes. This study was designed to investigate the effect of fatty acyl chain length on physicochemical properties, pDNA binding affinity, cell uptake, and in vitro transfection efficiency of N-acyl chitosan (NAC). NAC polymers were synthesized by carbodiimide mediated coupling reaction of chitosan with n-hexanoic, n-octanoic, and n-decanoic acid, respectively. These NAC polymers effectively condensed pDNA resulting in the size range of 220-342 nm with net positive charge. NAC polymers also showed good pDNA binding capacity, high protection of pDNA from nuclease degradation and excellent biocompatibility. Transfection efficiency of chitosan, in HEK 293 cells, was enhanced 15-25-fold after coupling with fatty acid and increased with a decrease in fatty acyl chain length of NAC. Thus, the present study demonstrates that the NAC polymers hold great potential as novel non-viral gene delivery vector.

Environmental parameters influence non-viral transfection of human mesenchymal stem cells for tissue engineering applications

Non-viral transfection is a promising technique that could be used to increase the therapeutic potential of stem cells. The purpose of this study was to explore practical culture parameters of relevance in potential human mesenchymal stem cell (hMSC) clinical and tissue engineering applications, including type of polycationic transfection reagent, N/P ratio and dose of polycation/pDNA polyplexes, cell passage number, cell density and cell proliferation. The non-viral transfection efficiency was significantly influenced by N/P ratio, polyplex dose, cell density and cell passage number. hMSC culture conditions that inhibited cell division also decreased transfection efficiency, suggesting that strategies to promote hMSC proliferation may be useful to enhance transfection efficiency in future tissue engineering studies. Non-viral transfection treatments influenced hMSC phenotype, including the expression level of the hMSC marker CD105 and the ability of hMSCs to differentiate down the osteogenic and adipogenic lineages. The parameters found here to promote hMSC transfection efficiency, minimize toxicity and influence hMSC phenotype may be instructive in future non-viral transfection studies and tissue engineering applications.

Histidinylated linear PEI: a new efficient non-toxic polymer for gene transfer

A series of linear polyethylenimine (lPEI) substituted with histidine residue (His-lPEI) was synthesized using the Michael reaction in order to provide new highly efficient vectors for gene therapy applications (up to 95% of transfected cells) with remarkable low cytotoxicity compared to lPEI-based polyplexes.

Induction of apoptosis by survivin silencing through siRNA delivery in a human breast cancer cell line

Post-transcriptional silencing of antiapoptotic genes is a promising strategy for cancer therapy, but delivering short interfering RNA (siRNA) molecules against such targets is challenging due to inability of anionic siRNA to cross cellular membranes. Lipid substitution on small molecular weight, nontoxic polyethylenimine (PEI) has been investigated as a promising approach for effective siRNA delivery. In this study, we report on the ability of low molecular weight, lipid-substituted PEI to deliver siRNA against the antiapoptotic protein survivin. Toxicity of a library of lipid-substituted PEIs, as well as their siRNA delivery and survivin silencing efficiency, was evaluated in MDA-MB-231 human breast cancer cells. A significant increase in cellular delivery of siRNA was observed as a result of lipid substitution. Most significant downregulation of survivin was established by caprylic acid-substituted polymers, which resulted in significant levels of apoptosis induction and resultant loss of cell viability. Survivin downregulation prior to anticancer drug treatment decreased the IC(50) of several drugs by 50- to 120-fold. Our experiments indicated an effective downregulation of survivin, a cell protective protein upregulated in tumor cells, by delivering siRNA with hydrophobically modified PEI. This study introduces a promising delivery system for safe and effective siRNA delivery that will be suitable for further investigation in preclinical animal models.

Intracellular trafficking pathways involved in the gene transfer of nano-structured calcium phosphate-DNA particles

Nano-structured calcium phosphate (NanoCaP) particles have been proven to be a powerful means of non-viral gene delivery. In order to better understand the mechanisms through which NanoCaPs-mediated mammalian cell transfection is achieved, we have sought to define the intracellular trafficking pathways involved in the cellular uptake and intracellular processing of these particles. Previous work has indicated that NanoCaP-DNA complexes are most likely internalized via endocytosis, however the subsequent pathways involved have not been determined. Through the use of specific inhibitors, we show that endocytosis of NanoCaP particles is both clathrin- and caveolae-dependent, and suggest that the caveolaer mechanism is the major contributor. We demonstrate colocalization of NanoCaP-pDNA complexes with known markers of both clathrin-coated and caveolar vesicles. Furthermore, through the use of quantitative flow cytometry, we present the first work in which the percent internalization of CaP-DNA complexes into cells is quantified. The overall goal of this research is to foster the continued improvement of NanoCaP-based gene delivery strategies.

Rational design, fabrication, characterization and in vitro testing of biodegradable microparticles that generate targeted and sustained transgene expression in HepG2 liver cells

Poly(lactide-co-glycolide) (PLGA) microparticles have significant potential for sustained delivery of plasmid DNA (pDNA). However, unmodified PLGA microparticles have poor transfection efficiencies. In this study, we use several approaches to enhance the transfection efficiencies of PLGA microparticles in a HepG2 liver cell line. Polyethylenimine (PEI) is used to condense the pDNA prior to loading into the PLGA microparticles. This provides enhanced loading efficiencies and greater protection to the pDNA during the entrapment process. In addition, the pDNA used (ApoE) incorporates a hybrid liver-specific murine albumin enhancer/α1 antitrypsin promoter (AlbE/hAAT) to enhance transgene expression in human liver (HepG2) cells. The percentage of surfactant used in the preparation of the microparticles, the polymer composition of the PLGA, the ratio of the PEI to pDNA (N/P), the structure of the PEI and the potential utility of a galactose targeting ligand were then investigated to further optimize the efficacy of the cationic microparticle non-viral delivery system in transfecting HepG2 cells. For each PLGA PEI-pDNA microparticle formulation prepared, we evaluated particle size, ζ-potential, loading of pDNA, cytotoxicity, and transgene expression in HepG2 cells and control human embryonic kidney (HEK293) and monkey African green kidney fibroblast-like (COS7) cells. Loading PLGA particles with PEI-ApoE pDNA complexes resulted in a significant reduction in particle size when compared to PLGA microparticles loaded with ApoE pDNA alone. Scanning electron microscopy images showed that all the particle formulations were smooth and spherical in appearance. Incorporation of the cationic PEI in the PLGA particles changed the ζ-potential from negative to positive. Complexing PEI with ApoE pDNA increased the loading efficiency of the ApoE pDNA into the PLGA microparticles. The cytotoxicity of PLGA particles loaded with PEI-ApoE pDNA complexes was similar to PLGA particles loaded with ApoE pDNA alone. The transfection efficiency of all particle formulations prepared with ApoE pDNA was significantly higher in HepG2 cells when compared to HEK293 and COS7 cell lines. The release of PEI-pDNA complexes from particles prepared with different PLGA polymer compositions including PLGA 50-50, PLGA 75-25, and PLGA 85-15 was sustained in all cases but the release profile was dependent on the polymer composition. Transmission electron microscopy images showed that PEI-pDNA complexes remained structurally intact after release. The optimum formulation for PLGA particles loaded with PEI-ApoE pDNA complexes was prepared using 2% polyvinyl alcohol, 50-50 PLGA compositions and N/P ratios of 5-10. Strong sustained transgene expression in HepG2 cells was generated by PLGA PEI-ApoE pDNA particles up to the full 13 days tested.

Novel poly(glycidyl methacrylate-b-propylene oxide-b-glycidyl methacrylate) derivatives with low cytotoxicity and efficient gene delivery

Gene therapy has been developed for decades, but is still hampered for general clinical treatment by lack of gene delivery vectors with high transfection efficiency and low cytotoxicity. In this study, well-defined BAB triblock copolymer, poly(glycidyl methacrylate-b-propylene oxide-b-glycidyl methacrylate), P(GMA-b-PO-b-GMA), was prepared via atom transfer radical polymerization and modified by different ratios of ethylenediamine (EDA) and 1-(3-aminopropyl) imidazole (API) to obtain cationic amphiphilic polymers. The difference in the ratio of EDA and API had an influence on pDNA-binding capability, size, and zeta potential of P(GMA-b-PO-b-GMA) derivatives. All the cationic amphiphilic polymers exhibited low cytotoxicity and good transfection activity in comparison with 25 kDa polyethylenimine (PEI) due to their special architecture. The optimal polymer, with 89% API and 11% EDA, showed the highest transfection efficiency among these polymers. Its luciferase expression at N/P ratio of 30 was comparable to that of 25 kDa PEI in a serum-free medium and higher than that of 25 kDa PEI by roughly an order of magnitude in a medium with serum.

Future of local bone regeneration - Protein versus gene therapy

The most promising attempts to achieve bone regeneration artificially are based on the application of mediators such as bone morphogenetic proteins (BMPs) directly to the deficient tissue site. BMPs, as promoters of the regenerative process, have the ability to induce de novo bone formation in various tissues, and many animal models have demonstrated their high potential for ectopic and orthotopic bone formation. However, the biological activity of the soluble factors that promote bone formation in vivo is limited by diffusion and degradation, leading to a short half-life. Local delivery remains a problem in clinical applications. Several materials, including hydroxyapatite, tricalcium phosphate, demineralised bone matrices, poly-lactic acid homo- and heterodimers, and collagen have been tested as carriers and delivery systems for these factors in a sustained and appropriate manner. Unfortunately these delivery vehicles often have limitations in terms of biodegradability, inflammatory and immunological rejection, disease transmission, and most importantly, an inability to provide a sustained, continuous release of these factors at the region of interest. In coping with these problems, new approaches have been established: genes encoding these growth factor proteins can be delivered to the target cells. In this way the transfected cells serve as local "bioreactors", as they express the exogenous genes and secrete the synthesised proteins into their vicinity. The purpose of this review is to present the different methods of gene versus growth factor delivery in tissue engineering. Our review focuses on these promising and innovative methods that are defined as regional gene therapy and provide an alternative to the direct application of growth factors. Various advantages and disadvantages of non-viral and viral vectors are discussed. This review identifies potential candidate genes and target cells, and in vivo as well as ex vivo approaches for cell transduction and transfection. In explaining the biological basis, this paper also refers to current experimental and clinical applications.