The crystal structure of the catalytic core domain of endoglucanase I from Trichoderma reesei at 3.6 A resolution, and a comparison with related enzymes

Structural and functional comparison of polysaccharide-degrading enzymes

Sugar molecules as well as enzymes degrading them are ubiquitously present in physiological systems, especially for vertebrates. Polysaccharides have at least two aspects to their function, one due to their mechanical properties and the second one involves multiple regulatory processes or interactions between molecules, cells, or extracellular space. Various bacteria exert exogenous pressures on their host organism to diversity glycans and their structures in order for the host organism to evade the destructive function of such microbes. Many bacterial organism produce glycan-degrading enzymes in order to facilitate their invasion of host tissues. Such polysaccharide degrading enzymes utilize mainly two modes of polysaccharide-degradation, a hydrolysis and a beta-elimination process. The three-dimensional structures of several of these enzymes have been elucidated recently using X-ray crystallography. There are many common structural motifs among these enzymes, mainly the presence of an elongated cleft transversing these molecules which functions as a polysaccharide substrate binding site as well as the catalytic site for these enzymes. The detailed structural information obtained about these enzymes allowed formulation of proposed mechanisms of their action. The polysaccharide lyases utilize a proton acceptance and donation mechanism (PAD), whereas polysaccharide hydrolases use a direct double displacement (DD) mechanism to degrade their substrates.

Structural basis for enantiomer binding and separation of a common beta-blocker: crystal structure of cellobiohydrolase Cel7A with bound (S)-propranolol at 1.9 A resolution

Cellobiohydrolase Cel7A (previously called CBH 1), the major cellulase produced by the mould fungus Trichoderma reesei, has been successfully exploited as a chiral selector for separation of stereo-isomers of some important pharmaceutical compounds, e.g. adrenergic beta-blockers. Previous investigations, including experiments with catalytically deficient mutants of Cel7A, point unanimously to the active site as being responsible for discrimination of enantiomers. In this work the structural basis for enantioselectivity of basic drugs by Cel7A has been studied by X-ray crystallography. The catalytic domain of Cel7A was co-crystallised with the (S)-enantiomer of a common beta-blocker, propranolol, at pH 7, and the structure of the complex was determined and refined at 1. 9 A resolution. Indeed, (S)-propranolol binds at the active site, in glucosyl-binding subsites -1/+1. The catalytic residues Glu212 and Glu217 make tight salt links with the secondary amino group of (S)-propranolol. The oxygen atom attached to the chiral centre of (S)-propranolol forms hydrogen bonds to the nucleophile Glu212 O(epsilon1) and to Gln175 N(epsilon2), whereas the aromatic naphthyl moiety stacks with the indole ring of Trp376 in site +1. The bidentate charge interaction with the catalytic glutamate residues is apparently crucial, since no enantioselectivity has been obtained with the catalytically deficient mutants E212Q and E217Q. Activity inhibition experiments with wild-type Cel7A were performed in conditions close to those used for crystallisation. Competitive inhibition constants for (R)- and (S)-propranolol were determined at 220 microM and 44 microM, respectively, corresponding to binding free energies of 20 kJ/mol and 24 kJ/mol, respectively. The K(i) value for (R)-propranolol was 57-fold lower than the highest concentration, 12.5 mM, used in co-crystallisation experiments. Still several attempts to obtain a complex with the (R)-enantiomer have failed. By using cellobiose as a selective competing ligand, the retention of the enantiomers of propranolol on the chiral stationary phase (CSP) based on Cel7A mutant D214N were resolved into enantioselective and non- selective binding. The enantioselective binding was weaker for both enantiomers on D214N-CSP than on wild-type-CSP.

Protein engineering of cellulases

Cellulases are enzymes which hydrolyse the beta-1,4-glucosidic linkages of cellulose. They fall into 13 of the 82 glycoside hydrolase families identified by sequence analysis, but they are traditionally divided into two classes termed 'endoglucanases' (EC 3.2.1.4) and 'cellobiohydrolases' (3.2.1.91). Both types of cellulases degrade soluble cellodextrins and amorphous cellulose but, with a few notable exceptions, it is only the cellobiohydrolases which degrade crystalline cellulose efficiently. Site-directed mutagenesis has been central to the characterisation of cellulases, ranging from the identification and characterisation of putative catalytic and binding residues, the trapping of enzyme-substrate complexes by crystallography through to the construction of new and improved biocatalysts including 'glycosynthases'. Whilst studies on soluble substrates and substrate analogues have provided a wealth of information, understanding the mechanism of degradation of the natural substrate, crystalline cellulose, remains a great challenge.

Carboxyl group modification significantly altered the kinetic properties of purified carboxymethylcellulase from Aspergillus niger

Carboxymethylcellulase (CMCase) from Aspergillus niger NIAB280 was purified by a combination of ammonium sulphate precipitation, ion-exchange, hydrophobic interaction and gel filtration chromatography on FPLC with 9-folds increase in specific activity. Native and subunit molecular weights were found to be 36 kDa each. The purified CMCase was modified by 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) in the presence of glycinamide for 15 min (GAM15) and glycinamide plus cellobiose for 75 min (GAM75). Similarly, the enzyme was modified by EDC in the presence of ethylenediamine dihydrochloride plus cellobiose for 75 min (EDAM75). The neutralization (GAM15 and GAM75) and reversal (EDAM75) of negative charges of carboxyl groups of CMCase had profound effect on the specificity constant (k(cat)/K(m)), pH optima, pK(a)'s of the active-site residues and thermodynamic parameters of activation. The specificity constants of native, GAM15, GAM75, and EDAM75 were 143, 340, 804, and 48, respectively. The enthalpy of activation (DeltaH(#)) of Carboxymethylcellulose (CMC) hydrolysis of native (50 and 15 kJ mol(-1)) and GAM15 (41 and 16 kJ mol(-1)) were biphasic whereas those of GAM75 (43 kJ mol(-1)) and EDAM75 (41 k J mol(-1)) were monophasic. Similarly, the entropy of activation (DeltaS(#)) of CMC hydrolysis of native (-61 and -173 J mol(-1) K(-1)) and GAM15 (-91 and -171 J mol(-1) K(-1)) were biphasic whereas those of GAM75 (-82 J mol(-1) K(-1)) and EDAM75 (-106 J mol(-1) K(-1)) were monophasic. The pH optima/pK(a)'s of both acidic and basic limbs of charge neutralized CMCases increased compared with those of native enzyme. The CMCase modification in the presence of glycinamide and absence of cellobiose at different pH's periodically activated and inhibited the enzyme activity indicating conformational changes. We believe that the alteration of the surface charges resulted in gross movement of loops that surround the catalytic pocket, thereby inducing changes in the vicinity of active site residues with concomitant alteration in kinetic and thermodynamic properties of the modified CMCases.

Thermophilic fungi: their physiology and enzymes

Thermophilic fungi are a small assemblage in mycota that have a minimum temperature of growth at or above 20 degrees C and a maximum temperature of growth extending up to 60 to 62 degrees C. As the only representatives of eukaryotic organisms that can grow at temperatures above 45 degrees C, the thermophilic fungi are valuable experimental systems for investigations of mechanisms that allow growth at moderately high temperature yet limit their growth beyond 60 to 62 degrees C. Although widespread in terrestrial habitats, they have remained underexplored compared to thermophilic species of eubacteria and archaea. However, thermophilic fungi are potential sources of enzymes with scientific and commercial interests. This review, for the first time, compiles information on the physiology and enzymes of thermophilic fungi. Thermophilic fungi can be grown in minimal media with metabolic rates and growth yields comparable to those of mesophilic fungi. Studies of their growth kinetics, respiration, mixed-substrate utilization, nutrient uptake, and protein breakdown rate have provided some basic information not only on thermophilic fungi but also on filamentous fungi in general. Some species have the ability to grow at ambient temperatures if cultures are initiated with germinated spores or mycelial inoculum or if a nutritionally rich medium is used. Thermophilic fungi have a powerful ability to degrade polysaccharide constituents of biomass. The properties of their enzymes show differences not only among species but also among strains of the same species. Their extracellular enzymes display temperature optima for activity that are close to or above the optimum temperature for the growth of organism and, in general, are more heat stable than those of the mesophilic fungi. Some extracellular enzymes from thermophilic fungi are being produced commercially, and a few others have commercial prospects. Genes of thermophilic fungi encoding lipase, protease, xylanase, and cellulase have been cloned and overexpressed in heterologous fungi, and pure crystalline proteins have been obtained for elucidation of the mechanisms of their intrinsic thermostability and catalysis. By contrast, the thermal stability of the few intracellular enzymes that have been purified is comparable to or, in some cases, lower than that of enzymes from the mesophilic fungi. Although rigorous data are lacking, it appears that eukaryotic thermophily involves several mechanisms of stabilization of enzymes or optimization of their activity, with different mechanisms operating for different enzymes.

Site-directed mutation of noncatalytic residues of Thermobifida fusca exocellulase Cel6B

Fifteen mutant genes in six loop residues and eight mutant genes in five conserved noncatalytic active site residues of Thermobifida fusca Cel6B were constructed, cloned and expressed in Escherichia coli or Streptomyces lividans. The mutant enzymes were assayed for catalytic activity on carboxymethyl cellulose (CMC), swollen cellulose (SC), filter paper (FP), and bacterial microcrystalline cellulose (BMCC) as well as cellotetraose, cellopentaose, and 2, 4-dinitrophenyl-beta-D-cellobioside. They were also assayed for ligand binding, enzyme processivity, thermostability, and cellobiose feedback inhibition. Two double Cys mutations that formed disulfide bonds across two tunnel forming loops were found to significantly weaken binding to ligands, lower all activities, and processivity, demonstrating that the movement of these loops is important but not essential for Cel6B function. Two single mutant enzymes, G234S and G284P, had higher activity on SC and FP, and the double mutant enzyme had threefold and twofold higher activity on these substrates, respectively. However, synergism with endocellulase T. fusca Cel5A was not increased with these mutant enzymes. All mutant enzymes with lower activity on filter paper, BMCC, and SC had lower processivity. This trend was not true for CMC, suggesting that processivity in Cel6B is a key factor in the hydrolysis of insoluble and crystalline cellulose. Three mutations (E495D, H326A and W329C) located near putative glycosyl substrate subsites -2, +1 and +2, were found to significantly increase resistance to cellobiose feedback inhibition. Both the A229V and L230C mutations specifically decreased activity on BMCC, suggesting that BMCC hydrolysis has a different rate limiting step than the other substrates. Most of the mutant enzymes had reduced thermostability although Cel6B G234S maintained wild-type thermostability. The properties of the different mutant enzymes provide insight into the catalytic mechanism of Cel6B.

Isolation of the ace1 gene encoding a Cys(2)-His(2) transcription factor involved in regulation of activity of the cellulase promoter cbh1 of Trichoderma reesei

A genetic selection method was developed for the cloning of positive-acting transcriptional regulatory genes in Saccharomyces cerevisiae. The method was applied for the isolation of activators of Trichoderma reesei (Hypocrea jecorina) cellulase genes. Activator genes were isolated from a T. reesei expression cDNA library on the basis of the ability of their translation products to activate transcription from the full-length T. reesei cbh1 promoter coupled to the S. cerevisiae HIS3 gene and to support the growth of the yeast colonies in the absence of histidine. Among the clones obtained was the ace1 gene encoding a novel polypeptide, ACEI, that contains three zinc finger motifs of Cys(2)-His(2) type. Possible ACEI homologues were found among expressed sequence tags of Aspergillus and Neurospora. The ability of ACEI to bind to the cbh1 promoter was further confirmed in the yeast one-hybrid system. In vitro binding and gel mobility shift assays revealed several binding sites for the ACEI protein in the cbh1 promoter. Disruption of the ace1 gene in T. reesei resulted in retarded growth of the fungus on a cellulose-containing medium, on which cellulases are normally highly expressed.

Acid hydrolysis of bacterial cellulose reveals different modes of synergistic action between cellobiohydrolase I and endoglucanase I

Intact and partially acid hydrolyzed cellulose from Acetobacter xylinum were used as model substrates for cellulose hydrolysis by 1,4-beta-D-glucan-cellobiohydrolase I (CBH I) and 1,4-beta-D-endoglucanase I (EG I) from Trichoderma reesei. A high synergy between CBH I and EG I in simultaneous action was observed with intact bacterial cellulose (BC), but this synergistic effect was rapidly reduced by acid pretreatment of the cellulose. Moreover, a distinct synergistic effect was observed upon sequential endo-exo action on BC, but not on bacterial microcrystalline cellulose (BMCC). A mechanism for endo-exo synergism on crystalline cellulose is proposed where the simultaneous action of the enzymes counteract the decrease of activity caused by undesirable changes in the cellulose surface microstructure.

Reaction kinetics, molecular action, and mechanisms of cellulolytic proteins

Cellulolytic proteins form a complex of enzymes that work together to depolymerize cellulose to the soluble products cellobiose and glucose. Fundamental studies on their molecular mechanisms have been facilitated by advances in molecular biology. These studies have shown homology between cellulases from different microorganisms, and common mechanisms between enzymes whose modes of action have sometimes been viewed as being different, as suggested by the distribution of soluble products. A more complete picture of the cellulolytic action of these proteins has emerged and combines the physical and chemical characteristics of solid cellulose substrates with the specialized structure and function of the cellulases that break it down. This chapter combines the fundamentals of cellulose structure with enzyme function in a manner that relates the cellulose binding and biochemical kinetics at the catalytic site of the proteins to the macroscopic behavior of cellulase enzyme systems.

Crystallographic evidence for substrate ring distortion and protein conformational changes during catalysis in cellobiohydrolase Ce16A from trichoderma reesei

BACKGROUND

Cel6A is one of the two cellobiohydrolases produced by Trichoderma reesei. The catalytic core has a structure that is a variation of the classic TIM barrel. The active site is located inside a tunnel, the roof of which is formed mainly by a pair of loops.

RESULTS

We describe three new ligand complexes. One is the structure of the wild-type enzyme in complex with a nonhydrolysable cello-oligosaccharide, methyl 4-S-beta-cellobiosyl-4-thio-beta-cellobioside (Glc)(2)-S-(Glc)(2), which differs from a cellotetraose in the nature of the central glycosidic linkage where a sulphur atom replaces an oxygen atom. The second structure is a mutant, Y169F, in complex with the same ligand, and the third is the wild-type enzyme in complex with m-iodobenzyl beta-D-glucopyranosyl-beta(1,4)-D-xylopyranoside (IBXG).

CONCLUSIONS

The (Glc)(2)-S-(Glc)(2) ligand binds in the -2 to +2 sites in both the wild-type and mutant enzymes. The glucosyl unit in the -1 site is distorted from the usual chair conformation in both structures. The IBXG ligand binds in the -2 to +1 sites, with the xylosyl unit in the -1 site where it adopts the energetically favourable chair conformation. The -1 site glucosyl of the (Glc)(2)-S-(Glc)(2) ligand is unable to take on this conformation because of steric clashes with the protein. The crystallographic results show that one of the tunnel-forming loops in Cel6A is sensitive to modifications at the active site, and is able to take on a number of different conformations. One of the conformational changes disrupts a set of interactions at the active site that we propose is an integral part of the reaction mechanism.

A multinuclear NMR study of the active site of an endoglucanase from a strain of Bacillus. Use of Trp residues as structural probes

In the hydrolytic reaction catalyzed by an endoglucanase from a Bacillus strain (endoglucanase K), 2 of 12 Trp residues, Trp174 and Trp243, are responsible for binding of the substrate and/or for the catalysis (Kawaminami, S., Ozaki, K., Sumitomo, N., Hayashi, Y., Ito, S., Shimada, I., and Arata, Y. (1994) J. Biol. Chem. 269, 28752-28756). Here we report results of a stable isotope-aided NMR analysis of the active site of endoglucanase K, using Trp174 and Trp243 as structural probes. Hydrogen-deuterium exchange experiments performed for the NH protons of main and side chains of Trp residues revealed that Trp174 and Trp243 are located in the hydrophilic and hydrophobic microenvironments in the active site, respectively. We also carried out pH titration experiments for indole C2 proton resonances of Trp residues and measured the pH dependence of specific activities for wild-type endoglucanase K and its mutants in which Glu or Asp residues are replaced with their respective amide forms. On the basis of the results obtained from the present study, we conclude that (a) Glu130 and Asp191, which are in spatial proximity to Trp174 and Trp243 in the active site, play a crucial role in the enzymatic activity; (b) Glu130 and Asp191 interact with each other in the active site, leading to an increase in the pKa values to 5.5 for both amino acid residues; and (c) the pKa values of Glu130 and Asp191 would lead to an unusually narrow pH-activity profile of the endoglucanase K.

Endoglucanase 28 (Cel12A), a new Phanerochaete chrysosporium cellulase

A 28-kDa endoglucanase was isolated from the culture filtrate of Phanerochaete chrysosporium strain K3 and named EG 28. It degrades carboxymethylated cellulose and amorphous cellulose, and to a lesser degree xylan and mannan but not microcrystalline cellulose (Avicel). EG 28 is unusual among cellulases from aerobic fungi, in that it appears to lack a cellulose-binding domain and does not bind to crystalline cellulose. The enzyme is efficient at releasing short fibres from filter paper and mechanical pulp, and acts synergistically with cellobiohydrolases. Its mode of degrading filter paper appears to be different to that of endoglucanase I from Trichoderma reesei. Furthermore, EG 28 releases colour from stained cellulose beads faster than any other enzyme tested. Peptide mapping suggests that it is not a fragment of another known endoglucanases from P. chrysosporium and peptide sequences indicate that it belongs to family 12 of the glycosyl hydrolases. EG 28 is glycosylated. The biological function of the enzyme is discussed, and it is hypothesized that it is homologous to EG III in Trichoderma reesei and the role of the enzyme is to make the cellulose in wood more accessible to other cellulases.

Crystal structure of the family 7 endoglucanase I (Cel7B) from Humicola insolens at 2.2 A resolution and identification of the catalytic nucleophile by trapping of the covalent glycosyl-enzyme intermediate

Cellulose is the major polysaccharide component of the plant cell wall and the most abundant naturally produced macromolecule on Earth. The enzymic degradation of cellulose, by cellulases, is therefore of great environmental and commercial significance. Cellulases are found in 12 of the glycoside hydrolase families classified according to their amino acid sequence similarities. Endoglucanase I (Cel7B), from the soft-rot fungus Humicola insolens, is a family 7 enzyme. The structure of the native form of Cel7B from H. insolens at 2.2 A resolution has been solved by molecular replacement using the known Trichoderma reesei cellobiohydrolase I [Divne, Ståhlberg, Reinikainen, Ruohonen, Pettersson, Knowles, Teeri and Jones (1994) Science 265, 524-528] structure as the search model. Cel7B catalyses hydrolysis of the beta-1,4 glycosidic linkages in cellulose with net retention of anomeric configuration. The catalytic nucleophile at the active site of Cel7B has been identified as Glu-197 by trapping of a 2-deoxy-2-fluorocellotriosyl enzyme intermediate and identification of the labelled peptide in peptic digests by tandem MS. Site-directed mutagenesis of both Glu-197 and the prospective catalytic acid, Glu-202, results in inactive enzyme, confirming the critical role of these groups for catalysis.

The structure of HIV-1 reverse transcriptase complexed with an RNA pseudoknot inhibitor

Small RNA pseudoknots, selected to bind human immunodeficiency virus type 1 (HIV-1) reverse transcriptase tightly, are potent inhibitors of reverse transcriptase. The co-crystal structure of reverse transcriptase complexed with a 33 nucleotide RNA pseudoknot has been determined by fitting the ligand into a high quality, 4-fold averaged 4.8 A resolution electron density map. The RNA is kinked between stems S1 and S2, thereby optimizing its contacts with subunits of the heterodimer. Its binding site extends along the cleft that lies between the polymerase and RNase H active sites, partially overlaps with that observed for duplex DNA and presumably overlaps some portion of the tRNA site. Stem S2 and loop L1 stabilize the 'closed' conformation of the polymerase through extensive electrostatic interactions with several basic residues in helix I of the p66 thumb and in the p66 fingers domain. Presumably, this RNA ligand inhibits reverse transcriptase by binding to a site that partly overlaps the primer-template binding site.

Tryptophan 272: an essential determinant of crystalline cellulose degradation by Trichoderma reesei cellobiohydrolase Cel6A

Trichoderma reesei cellobiohydrolase Cel6A (formerly CBHII) has a tunnel shaped active site with four internal subsites for the glucose units. We have predicted an additional ring stacking interaction for a sixth glucose moiety with a tryptophan residue (W272) found on the domain surface. Mutagenesis of this residue selectively impairs the enzyme function on crystalline cellulose but not on soluble or amorphous substrates. Our data shows that W272 forms an additional subsite at the entrance of the active site tunnel and suggests it has a specialised role in crystalline cellulose degradation, possibly in guiding a glucan chain into the tunnel.

The Streptomyces lividans family 12 endoglucanase: construction of the catalytic cre, expression, and X-ray structure at 1.75 A resolution

Cellulases are the glycoside hydrolases responsible for the enzymatic breakdown of the structural plant polymer cellulose. Together with xylanases they counteract the lmitless accumulation of plant biomass in nature and are of considerable fundamental and biotechnological interest. Endoglucanase CelB from Streptomyces lividans performs hydrolysis of the beta-1,4-glycosidic bonds of cellulose, with net retention of anomeric configuration. The enzyme is a member of glycoside hydrolase family 12 [Henrissat, B., and Bairoch, A. (1996) Biochem. J. 316, 695-696], which had previously eluded detailed structural analysis. A truncated, but cataytically competent form of CelB, locking the flexible linker region and cellulose-binding domain, has been constructed and overexpressed in a S. lividans expression system. The three-dimensional X-ray structure of the resulting catalytic domain, CelB2, has been solved by conventional multiple isomorphous replacement methods and refined to an R factor of 0.187 at 1.75 A resolution. The overall fold of the enzyme shows a remarkable similarity to that of family 11 xylanases, as previously predicted by hydrophobic clustering analysis [Törrönen, A., Kubicek, C.P., and Henrissat, B. (1993) FEBS Lett. 321, 135-139]. The 23 kDa protein presents a jelly-roll topology, built up mainly by antiparallel beta-sheets arranged in a sandwich-like manner. A deep substrate-binding cleft runs across the surface, as has been observed in other endoglucanase structures, and is potentially able to accommodate up to five binding subsites. The likely catalytic nucleophile and Brønsted acid/base, residues Glu 120 and Glue 203, respectively, have their carboxylate groups separated by a distance of approximately 7.0 A and are located approximately 15 A from one end of the cleft, implying a -3 to +2 active site.

Oligosaccharide specificity of a family 7 endoglucanase: insertion of potential sugar-binding subsites

Family 7 of the glycosyl hydrolases contains both endoglucanases and cellobiohydrolases. In addition to their different catalytic activities on crystalline substrates, the cellobiohydrolases differ from the endoglucanases in their activity on longer soluble substrates, indicative of a greater number of subsites on the enzyme. A double mutant (S37W, P39W) of the Humicola insolens endoglucanase I (EG I) has been constructed in order to mimic aspects of the subsite structure of the corresponding family 7 cellobiohydrolase, cellobiohydrolase-I (CBH I). The 3-D crystal structure of the double mutant has been solved and refined to a crystallographic R-factor of 0.17 at a resolution of 2.2 A (1 A = 0.1 nm). The two mutant tryptophans are clearly visible in the electron density and are in the same orientation as those found in the substrate binding groove of CBH I. In addition to the substitutions, the C-terminal amino acids (399QELQ), disordered in the native enzyme structure, are clearly visible and there are a small number of minor loop movements associated with differences in crystal packing. Kinetic determinations show that the S37W, P39W mutant EG I has almost identical activity, compared to native EG I, on small soluble cellodextrins. On phosphoric acid swollen cellulose there is a small (30%), but significant, decrease in the apparent KM indicating that the double mutant may indeed exhibit stronger binding to longer polymeric substrates.