Recent developments on ion-exchange membranes and electro-membrane processes

New Insights into Perfluorinated Sulfonic-Acid Ionomers

In this comprehensive review, recent progress and developments on perfluorinated sulfonic-acid (PFSA) membranes have been summarized on many key topics. Although quite well investigated for decades, PFSA ionomers' complex behavior, along with their key role in many emerging technologies, have presented significant scientific challenges but also helped create a unique cross-disciplinary research field to overcome such challenges. Research and progress on PFSAs, especially when considered with their applications, are at the forefront of bridging electrochemistry and polymer (physics), which have also opened up development of state-of-the-art in situ characterization techniques as well as multiphysics computation models. Topics reviewed stem from correlating the various physical (e.g., mechanical) and transport properties with morphology and structure across time and length scales. In addition, topics of recent interest such as structure/transport correlations and modeling, composite PFSA membranes, degradation phenomena, and PFSA thin films are presented. Throughout, the impact of PFSA chemistry and side-chain is also discussed to present a broader perspective.

The type of ion selective membrane determines stability and production levels of microbial electrosynthesis

Microbial electrosynthesis (MES) can enable electricity-driven bioproduction from CO₂. Several membrane types such as anion exchange, cation exchange, and bipolar membranes (AEM/CEM/BPM) can be used to separate the anodic oxidation from the biocathodic reduction. The impact of the membrane type on MES has not yet been studied. Therefore we compared the three membranes for MES of acetic acid. The reactor with AEM enabled in situ recovery of acetic acid. This extraction led to a 32% higher production rate and efficiency compared to the systems that did not include product recovery, as product inhibition was likely occurring. Besides H⁺/OH^-, mainly HCO₃^- contributed to charge balancing. Due to water displacement across the membrane, the product concentration in the AEM reactor (9g/L) did not exceed the concentration in the CEM reactor (10.5g/L). Overall this comparison shows that the membrane type in MES can be critical towards a stable and efficient process.

Synthesis and characterization of a tin(iv) antimonophosphate nano-composite membrane incorporating 1-dodecyl-3-methylimidazolium bromide ionic liquid

Ionic liquid doped PVC based nanocomposite membranes, with varying crystallinity that affects their physicochemical properties, are prepared and characterized.

Electrosorption at functional interfaces: from molecular-level interactions to electrochemical cell design

This perspective discusses the fundamental processes behind electrosorption at charged interfaces, and highlights advances in electrode design for sustainable technologies in water purification and ion-selective separations.

The removal of mercury (II) from water by Ag supported on nanomesoporous silica

In this study, the synthesis of SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %) has been investigated under acidic conditions by using P123 as a template via the direct method. The nanocomposites of SBA-15 were synthesized by the same method and by the addition of silver salt. Finally, the nanocomposite materials were examined for the removal of mercury ions from wastewater as an adsorbent by the reverse titration method. Characterization was carried out through x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption-desorption (Brunauer-Emmett-Teller). XRD spectra confirmed the presence of silver nanoparticles within the amorphous silica matrix of SBA-15. The Barrett-Joyner-Halenda analysis showed that SBA-15 and SBA-15/Ag have a narrow pore size distribution. SEM images demonstrated that the morphology of the matrix of SBA-15 is in spherical state. Furthermore, wavelength dispersive x-ray spectroscopy identified the presence and distribution of silver nanoparticles inside the pore channels and outside of them. Typical TEM images of SBA-15 and SBA-15/Ag (5 wt.%) indicated a regular hexagonal pore structure with long-range order and long channels. In SBA-15/Ag (5 wt.%) sample, the nanoparticles of silver was found into the pores and outside of them. The removal of mercury ions from wastewater using mesoporous silica nanocomposite containing silver nanoparticles was studied by the reverse titration analysis. The best capacity of adsorption of mercury ions from wastewater was obtained for SBA-15/Ag (5 wt.%) sample, which was equal to 42.26 mg/g in 20 min at pH of 7. The Freundlich model was used to explain the adsorption characteristics for the heterogeneous surface, and [Formula: see text] (adsorption capacity) and n (adsorption intensity) were determined for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %). The value of R2 was about 0.99, 0.99, 0.98, and 0.98 and Kf was about 42, 48, 58, and 58 mg/g for SBA-15/Ag, SBA-15/Ag (2.5 %), SBA-15/Ag (5 %), and SBA-15/Ag (10 %), respectively. Furthermore, the values of n >1 show a favorable adsorption process for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials. Moreover, the Langmuir isotherm model evaluation showed that the correlation coefficients for all concentrations were R2 >0.99, indicating that Hg (II) ions were adsorbed on the surface of SBA-15/Ag via chemical and physical interaction. Additionally, the analytic hierarchy process (AHP) and Technique of Order Preference Similarity to the Ideal Solution (TOPSIS) methods that depend on the criteria of the surface area, amount of adsorbent, pore volume, and cost of synthesis were used. The evaluation of results showed that the best sample was SBA-15/Ag (5 wt.%). Furthermore, the research work highlighted the antibacterial nanocomposite with suitable adsorption of Hg (II) ions from water solutions and supported its potential for environmental applications. This nanocomposite can be used in the absorption domain of Hg (II) ions from water solutions.

Fouling on ion-exchange membranes: Classification, characterization and strategies of prevention and control

The environmentally friendly ion-exchange membrane (IEM) processes find more and more applications in the modern industries in order to demineralize, concentrate and modify products. Moreover, these processes may be applied for the energy conversion and storage. However, the main drawback of the IEM processes is a formation of fouling, which significantly decreases the process efficiency and increases the process cost. The present review is dedicated to the problematic of IEM fouling phenomena. Firstly, the major types of IEM fouling such as colloidal fouling, organic fouling, scaling and biofouling are discussed along with consideration of the main factors affecting fouling formation and development. Secondly, the review of the possible methods of IEM fouling characterization is provided. This section includes the methods of fouling visualization and characterization as well as methods allowing investigations of characteristics of the fouled IEMs. Eventually, the reader will find the conventional and modern strategies of prevention and control of different fouling types.

Ion-exchange membranes in chemical synthesis – a review

The applicability of ion-exchange membranes (IEMs) in chemical synthesis was discussed based on the existing literature. At first, a brief description of properties and structures of commercially available ion-exchange membranes was provided. Then, the IEM-based synthesis methods reported in the literature were summarized, and areas of their application were discussed. The methods in question, namely: membrane electrolysis, electro-electrodialysis, electrodialysis metathesis, ion-substitution electrodialysis and electrodialysis with bipolar membrane, were found to be applicable for a number of organic and inorganic syntheses and acid/base production or recovery processes, which can be conducted in aqueous and non-aqueous solvents. The number and the quality of the scientific reports found indicate a great potential for IEMs in chemical synthesis.

Partitioning of mobile ions between ion exchange polymers and aqueous salt solutions: importance of counter-ion condensation

Equilibrium partitioning of ions between a membrane and a contiguous external solution strongly influences transport properties of polymeric membranes used for water purification and energy generation applications.

Electroconductive and electroresponsive membranes for water treatment

In populated, water-scarce regions, seawater and wastewater are considered as potable water resources that require extensive treatment before being suitable for consumption. The separation of water from salt, organic, and inorganic matter is most commonly done through membrane separation processes. Because of permeate flux and concentration polarization, membranes are prone to fouling, resulting in a decline in membrane performance and increased energy demands. As the physical and chemical properties of commercially available membranes (polymeric and ceramic) are relatively static and insensitive to changes in the environment, there is a need for stimuli-reactive membranes with controlled, tunable surface and transport properties to decrease fouling and control membrane properties such as hydrophilicity and permselectivity. In this review, we first describe the application of electricity-conducting and electricity-responsive membranes (ERMs) for fouling mitigation. We discuss their ability to reduce organic, inorganic, and biological fouling by several mechanisms, including control over the membrane’s surface morphology, electrostatic rejection, piezoelectric vibrations, electrochemical reactions, and local pH changes. Next, we examine the use of ERMs for permselectivity modification, which allows for the optimization of rejection and control over ion transport through the application of electrical potentials and the use of electrostatically charged membrane surfaces. In addition, electrochemical reactions coupled with membrane filtration are examined, including electro-oxidation and electro-Fenton reactions, demonstrating the capability of ERMs to electro-oxidize organic contaminates with high efficiency due to high surface area and reduced mass diffusion limitations. When applicable, ERM applications are compared with commercial membranes in terms of energy consumptions. We conclude with a brief discussion regarding the future directions of ERMs and provide examples of several applications such as pore size and selectivity control, electrowettability, and capacitive deionization. To provide the reader with the current state of knowledge, the review focuses on research published in the last 5 years.

Electrodialysis heterogeneous ion exchange membranes modified by SiO2 nanoparticles: fabrication and electrochemical characterization

In the current study mixed matrix heterogeneous cation exchange membranes were prepared by solution casting technique. The effect of SiO(2) nanoparticles in the polymeric solution on the physicochemical properties of prepared membranes was studied. Scanning optical microscope images showed uniform particle distribution and relatively uniform surfaces for the prepared membranes. The membrane water content was reduced by silica nanoparticles in the membranes' matrix. The membrane ion exchange capacity, membrane potential, transport number and selectivity were improved initially by an increase of SiO(2) nanoparticles concentration up to 1%wt in prepared membranes and then showed a decreasing trend with a further increase in additive ratio from 1 to 4%wt. The ionic permeability and flux were also decreased initially by an increase of silica nanoparticles concentration up to 0.5%wt in the membrane matrix and then increased again with a further increase in nanoparticles concentration from 0.5 to 4%wt. Moreover, the results exhibited that using silica nanoparticles in the membrane matrix caused an obvious decrease in areal electrical resistance. The opposite trend was found for membrane mechanical strength using SiO(2) nanoparticles.

Transition from ballistic to electrodiffusive transport in free-standing nanometer-sized polymer membranes

The transition from ballistic to electrodiffusive transport of ions through thin polymer membranes has been investigated by recording single transport events via time-correlated single-particle detection. At the highest kinetic energies investigated, ballistic transport of potassium ions is observed with no discernible energy loss to the membrane. At the lowest kinetic energies investigated (several 100 eV) ions are demonstrated to lose the entire kinetic energy to the membrane. Transport there occurs by electrodiffusion. A transition regime is observed. The transition energy is shown to depend on the thickness of the membrane.

Breath Figure Method for Construction of Honeycomb Films

Honeycomb films with various building units, showing potential applications in biological, medical, physicochemical, photoelectric, and many other areas, could be prepared by the breath figure method. The ordered hexagonal structures formed by the breath figure process are related to the building units, solvents, substrates, temperature, humidity, air flow, and other factors. Therefore, by adjusting these factors, the honeycomb structures could be tuned properly. In this review, we summarized the development of the breath figure method of fabricating honeycomb films and the factors of adjusting honeycomb structures. The organic-inorganic hybrid was taken as the example building unit to discuss the preparation, mechanism, properties, and applications of the honeycomb films.