Adsorption of chromium (VI) by ethylenediamine-modified cross-linked magnetic chitosan resin: isotherms, kinetics and thermodynamics

Preparation of bio-inspired trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite for adsorption of chromium (VI) ions

Chitosan and poly(1-vinylimidazole) are both potential adsorbents to remove Cr(VI). Here, we designed the preparation of new adsorbents by combining chitosan and poly(1-vinylimidazole) to get the synergistic effect for the removal of hexavalent chromium. Trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite was successfully synthesized by one-step free radical polymerization based on the grafting backbone of chitosan and vinylimidazole. The resulting adsorbents were used for the removal of Cr(VI) ions from the aqueous solution. The modified chitosan composite was characterized by ATR, FTIR, BET isotherm studies, elemental analysis, TGA, DSC, FE-SEM, and EDX. ATR. FTIR results confirmed the presence of the imidazole group in modified chitosan. The adsorption results were described by the Langmuir isotherm model with a maximum adsorption capacity of 196.1 mg/g for modified chitosan, however, the chitosan yielded 151.5 mg/g. It has been observed that the adsorption of chromium fitted better with the pseudo-second-order kinetics. The modified chitosan composite exhibited greater adsorption capacity than chitosan for hexavalent chromium and has potential application for Cr(VI) removal from aqueous solution containing other common ions with regeneration ability. This novel approach of modifying chitosan with telomerized poly(1-vinyl imidazole) offers potential application in wastewater treatment of different industries releasing Cr (VI).

Kinetics studies on the adsorption of Methyl Orange and Metanil Yellow onto bottom ash: a comparative account

The focal point of the study lies in the comparative evaluation of the kinetic data involved in the eradication of toxic dyes from waste waters using the adsorption technique. The investigation reveals the dynamic adsorption behavior of two hazardous textile dyes viz. Metanil Yellow and Methyl Orange over bottom ash, an industrial waste material. The impact of several experimental parameters has been inspected using batch mode to acquire information on the ongoing mechanism. The graphical profiles obtained for the adsorption of Metanil Yellow and Methyl Orange onto bottom ash suggested an increase in the adsorption rate with time, with gradual attainment of equilibrium between the adsorbing species and adsorbent. The study revealed that second-order kinetics has been followed in both cases. Adsorption of Methyl Orange over bottom ash followed particle diffusion whereas film diffusion predominated in the case of Metanil Yellow.

Preparation of polyglycerol mediated superparamagnetic graphene oxide nanocomposite and evaluation of its adsorption properties on tetracycline

In this paper, we synthesized a polyglycerol(PG)-mediated superparamagnetic graphene oxide nanocomposite called MGON, consisting of PG-modified superparamagnetic iron oxide nanoparticles (SPION) covalently bonded to PG-functionalized graphene oxide (GO). MGON exhibits better dispersibility and colloidal stability in aqueous solution than the magnetic graphene oxide reported in the literature. The physicochemical properties of MGON were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and UV-vis spectroscopy. Applied to the adsorption of tetracycline (TC) in aqueous solution as an adsorbent, the MGON showed excellent adsorption performance with the maximum adsorption capacity of 684.93 mg/g at 298 K. Adsorption kinetics and isotherm results indicate that the adsorption process conforms to the pseudo-second-order kinetics and Langmuir isotherm models. Adsorption thermodynamics has confirmed that the adsorption process of TC on MGON is spontaneous and endothermic. With the increase of temperature, the adsorption capacity of MGON increases continuously, and the adsorption capacity of MGON is the largest when the pH value is 7. Furthermore, the π-π and cation-π interaction, amidation reaction, and hydrogen bonding can be used to explain the adsorption mechanism of TC on MGON. Desorption and regeneration experiments showed that MGON still had 67.65% regenerative performance after five cycles. Hence, MGON is a promising adsorbent in the removal of tetracycline from wastewater.

β-Cyclodextrin-based hollow nanoparticles with excellent adsorption performance towards organic and inorganic pollutants

In this work, β-cyclodextrin (β-CD) based hollow nanoparticles (denoted as β-CDHN) with abundant active sites and high specific surface area were first fabricated via a facile one-step method. The β-CDHN presented a maximum adsorption capacity of 2080.35, 427.35 and 120.48 mg g^-1 towards the cationic dye methylene blue (MB), heavy metal ions (Pb²⁺) and bisphenol A (BPA), respectively, much higher than those of many other adsorbents. Furthermore, β-CDHN also exhibited fast adsorption kinetics towards these pollutants with adsorption rate constants 6 to 200 times higher than those of activated carbon and other β-CD-based adsorbents, meaning the former can remove these pollutants at a much faster adsorption rate than the latter adsorbents. More importantly, the removal efficiency of these pollutants on β-CDHN almost remained stable after 10 regeneration cycles with favorable recyclability. The prepared β-CDHN show great potential in practical applications due to their low costs and high efficiency in the treatment of organic and inorganic pollutants from wastewater.

Changes of heavy metal fractions during co-composting of agricultural waste and river sediment with inoculation of Phanerochaete chrysosporium

The effects of Phanerochaete chrysosporium on the bioavailability of multiple heavy metals (Pb, Cd, Cu, and Zn) in river sediments were investigated by co-composting with the agricultural waste. The results showed that the Phanerochaete chrysosporium inoculation can greatly enhance the passivation on Cu, Pb and Cd during 60 days co-composting. The effects in the three metals followed the order: Cu > Cd > Pb. There were no differences for Zn whether inoculation with P. chrysosporium or not. Redundancy analysis (RDA) implied that more than 4/5 of the variation of all fractions data for all heavy metals was explained by all significant canonical axes. P. chrysosporium can change the significant parameters for each metal and enhance the explanatory power of RDA model. The inoculation can strengthen the effect of OM (organic matter) on the bioavailability of heavy metals, but weaken the contribution of pH.

Novel lanthanum doped biochars derived from lignocellulosic wastes for efficient phosphate removal and regeneration

Phosphorus reduction from wastewater is vital to mitigate eutrophication of receiving waters. In this study, discarded lignocellulose biochar loaded with lanthanum (defined as La-biochar) was applied for phosphate adsorption. Based on the design of response surface methodology, La-biochar displayed a high phosphate adsorption capacity of 36.06 mg P/g, strong pH-compatibility from 3 to 12, favorable selectivity for phosphate among foreign ions (Cl^-, SO₄^2-, CO₃^2-, HCO₃^- and NO₃^-), excellent reusability with 92.3% desorption efficiency and retained 85% adsorption capacity after five recycles. The adsorption law of La-biochar perfectly matched with the pseudo-second-order model and the Langmuir model. Moreover, real wastewater adsorption experiments indicated the removal of total phosphorus within 20 min. Ligand exchange, electrostatic attraction, and complexation mechanisms contributed to phosphate adsorption on La-biochar. Overall, the La-biochar material could be applied as a potential sustainable building block for the preconcentration of phosphorus for practical pollutant purification.

Adsorptive nanocomposite membranes for heavy metal remediation: Recent progresses and challenges

Heavy metal contamination in aqueous system has attracted global attention due to the toxicity and carcinogenicity effects towards living bodies. Among available removal techniques, adsorptive removal by nanosized materials such as metal oxide, metal organic frameworks, zeolite and carbon-based materials has attracted much attention due to the large active surface area, large number of functional groups, high chemical and thermal stability which led to outstanding adsorption performance. However, the usage of nanosized materials is restricted by the difficulty in separating the spent adsorbent from aqueous solution. The shift towards the use of adsorptive composite membrane for heavy metal ions removal has attracted much attention due to the synergistic properties of adsorption and filtration approaches in a same chamber. Thus, this review critically discusses the development of nanoadsorbents and adsorptive nanocomposite membranes for heavy metal removal over the last decade. The adsorption mechanism of heavy metal ions by the advanced nanoadsorbents is also discussed using kinetic and isotherm models. The challenges and future prospect of adsorptive membrane technology for heavy metal removal is presented at the end of this review.

Sorption of polyhalogenated carbazoles (PHCs) to microplastics

The sorption of 5 Polyhalogenated carbazoles (PHCs) [3,6-dibromocarbazole (3,6-BCZ), 3,6-dichlorocarbazole (3,6-CCZ), 3,6-diiodocarbazole (3,6-ICZ), 2,7-dibromocarbazole (2,7-BCZ) and 3-bromocarbazole (3-BCZ)] on to three microplastics [polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC)] in a simulated seawater system are studied. Sorption isotherms demonstrated that PVC had the maximum sorption capacity, which can be attributed to polar-polar interaction. The sorption kinetics model showed that the sorption process was controlled by both intraparticle and film diffusion. The sorption of PHCs to microplastics was significantly influenced by temperature, the sorption capacity first increased gradually and then decreased with the increasing temperature. Increasing the salinity decreased the sorption of PHCs onto PP, PE, PVC microplastics. Our results indicated that all three kinds of microplastics can serve as carriers for PHCs in the aquatic environment, which put marine ecosystems at higher risks.

Nanoscale Zero-Valent Iron and Chitosan Functionalized Eichhornia crassipes Biochar for Efficient Hexavalent Chromium Removal

Sorption is widely used for the removal of toxic heavy metals such as hexavalent chromium (Cr(VI)) from aqueous solutions. Green sorbents prepared from biomass are attractive, because they leverage the value of waste biomass and reduce the overall cost of water treatment. In this study, we fabricated biochar (BC) adsorbent from the biomass of water hyacinth (Eichhornia crassipes), an invasive species in many river channels. Pristine BC was further modified with nanoscale zero-valent iron (nZVI) and stabilized with chitosan (C) to form C–nZVI–BC. C–nZVI–BC adsorbent showed high hexavalent chromium sorption capacity (82.2 mg/g) at pH 2 and removed 97.34% of 50 mg/L Cr(VI) from aqueous solutions. The sorption capacity of chitosan–nZVI-modified biochar decreased while increasing the solution pH value and ionic strength. The results of a sorption test indicated that multiple mechanisms accounted for Cr(VI) removal by C–nZVI–BC, including complexation, precipitation, electrostatic interactions, and reduction. Our study suggests a way of adding value to biomass waste by considering environmental treatment purposes.

A novel carboxylic-functional indole-based aerogel for highly effective removal of heavy metals from aqueous solution via synergistic effects of face-point and point-point interactions

A new type of carboxylic-functional indole-based aerogel (CHIFA) has been successfully prepared via a facile sol–gel technology, which possessed a highly effective removal of heavy metals from aqueous solution through the synergistic effects of face–point and point–point interactions.

A new type of carboxylic-functional indole-based aerogel (CHIFA) has been successfully prepared, which possessed highly effective removal of heavy metals from aqueous solution through the synergistic effects of face–point and point–point interactions.

Synthesis of mesoporous rebar MWCNT/alumina composite (RMAC) nodules for the effective removal of methylene blue and Cr (VI) from an aqueous medium

The distinctive and tuneable physical, chemical and configurational properties of carbon nanotubes (CNTs), has prompted their combination with metal oxides to contrive carbon composites showing entrancing adsorption property with incredible potential in water treatment. MWCNT/Alumina (RMAC) nodules with effective adsorption capacity were synthesized following aqueous sol-gel route. Batch sorption experiments examined the efficiency of removal of dyes and heavy metal ions from an aqueous solution on RMAC nodules. The factors affecting adsorption were studied for adsorption of methylene blue dye (MB) and hexavalent chromium by altering the MWCNT concentration from 1 wt.% to 5 wt.%. The adsorption experiment demonstrated an adsorption capacity of 187.5 and 597 mg g^-1 at 25 °C for MB and Cr (VI) respectively. Various characterization techniques such as XRD, BET, TEM, Raman, FTIR, TPD and CHN were employed to study the initial development of the material. Multiple adsorption interaction mechanisms (electrostatic interactions, hydrogen bonding, π-π electron-donor-acceptor interactions) may be credited for the remarkable adsorption capacity of these nodules. Results of this work are of great significance for environmental applications of Alumina/MWCNT composite as a promising adsorbent nanomaterial for organic pollutants from aqueous solutions. Apart from high sorption ability, these nodules offer ease of separation with splendid regeneration ability.

Selective Cesium Adsorptive Removal on Using Crosslinked Tea Leaves

To remove the radioactive cesium from the polluted environment, tea leaves were chosen as cheap, and abundantly available environment-friendly bio-adsorbents to investigate the alkali metals adsorption. Fresh and used tea leaves (FT and UT) were found to have high efficiency and selectivity for cesium adsorption, after the crosslinking with concentrated sulfuric acid. Calculation of the proton-exchanged amount suggested adsorption mechanism of three alkali metals on crosslinked tea leaves involve a cationic exchange with a proton from the hydroxyl groups of the crosslinked tea leaves, as well as coordination with ethereal oxygen atoms to form the chelation. Further, considering the practical application of the polluted water treatment, the competitive adsorption of Cs+ and Na+ ions was investigated by the batch-wise method and column chromatography separation. Unlike the conventional ion exchange and chelate resins with less selectivity for Cs+ coexisting cations, both crosslinked fresh tea leaves (CFT) and crosslinked used tea leaves (CUT) exhibited Cs selectivity over Na. In addition, batch adsorption studies revealed that the cesium adsorptions were driven by the Langmuir isotherm model; the capacity of both crosslinked tea leaves for cesium adsorption was determined to be around 2.5 mmol g−1. The adsorption capacities are sufficiently higher in comparison with those of synthetic polymers, inorganic ion-exchangers, and other bio-adsorbents.

Characterization of modified Alternanthera philoxeroides by diethylenetriamine and its application in the adsorption of copper(II) ions in aqueous solution

By a simple and convenient method of using epichlorohydrin as linkages, a novel Alternanthera philoxeroides (AP) derivative modified with diethylenetriamine (DAP) was synthesized, which can remove copper(II) ions (Cu(II)) in the water environment efficiently. The adsorption capacity of DAP for Cu(II) under various factors was measured using ultraviolet spectrophotometer. The adsorption capacity and removal ratio were 19.33 mg/g and 95.57% at pH 5.5 and 298 K. The kinetic and equilibrium study shows that pseudo-second-order kinetic (R² = 0.9964) and Langmuir isotherm models (R² > 0.982) could properly describe DAP adsorption behaviors, and thermodynamic parameters indicate a spontaneous endothermic process (ΔG = - 3.6636 kJ/mol). The combined results of SEM, XRD, FTIR, and XPS analyses reveal that the dominant contribution for enhancement in Cu(II) adsorption is made by the formation of an amino group. And the adsorption mechanism is mainly the complexation reaction. The adsorption efficiency of DAP remained above 72.06% after 6 cycles of adsorption-desorption, which indicated that DAP has good regenerability and stability. All the results suggest that DAP could serve as promising adsorbents for Cu(II) pollution minimization.

Cross-Linking Stabilizes Electrical Resistance of Reduced Graphene Oxide in Humid Environments

Reduced graphene oxide (rGO) is an excellent candidate for many sensor applications, since its electrical properties can be tailored to become sensitive to temperature, humidity, strain, and chemicals. However, the wide use of rGO may be limited by its susceptibility to humidity changes. Here, for the first time, we report experimental evidence that (i) the interlayer spacing between rGO sheets can swell upon exposure to humid environments due to the intercalation of water and (ii) the expanded interlayer spacing increases electrical resistance. As a novel means of mitigating this instability, ethylenediamine was used as a covalent cross-linker to anchor rGO sheets to limit interlayer expansion and stabilize electrical resistance under humid environments.

Modified magnetic chitosan microparticles as novel superior adsorbents with huge "force field" for capturing food dyes

In this study, modified magnetic chitosan microparticles (MCDs) were fabricated and used as adsorbents for the removal of Food Yellow 3 (FY3) and Acid Yellow 23 (AY23) from aqueous solution. The magnetic microparticles were characterized by scanning electronic microscope, Brunauer-Emmett-Teller specific surface area, elemental analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetry analysis, differential scanning calorimetry, and vibrating-sample magnetometer. Then, the effects of pH value, initial dye concentration, and contact time on the adsorption of FY3 and AY23 by MCDs were investigated. Evidently, MCDs showed excellent adsorption performance for both food dyes, and their adsorption capacities (833.33 mg/g for FY3 and 666.67 mg/g for AY23) were considerably higher than those of unmodified adsorbents, which could be attributed to the electrostatic interaction and ion exchange between the grafted cationic polymer and food dyes. Adsorption isotherm and kinetic data of the magnetic microparticles were well fitted by Langmuir isotherm and pseudo-second-order kinetic model, respectively. The regeneration and reusability of MCDs were also explored. Results showed that more than 80% adsorption capacities of MCDs for FY3 and AY23 remained after five adsorption-desorption cycles.

Two physical processes enhanced the performance of Auricularia auricula dreg in Cd(II) adsorption: composting and pyrolysis

This study aims to discover the impact of composting and pyrolysis on the adsorption performance of Auricularia auricula dreg (AAD) for Cd(II) in aqueous solution. Auricularia auricula dreg (AAD), Auricularia auricula dreg biochar (AADB) and Auricularia auricula dreg compost (AADC) were used to remove Cd(II) from aqueous solution, and their adsorption conditions and mechanisms were compared. The adsorption quantity of three adsorbents reached the maximum (AAD: 80.0 mg/g, AADB: 91.7 mg/g, AADC: 93.5 mg/g) under same conditions (adsorbent dosage of 1 g/L, pH 5.0, biosorption temperature of 25 °C, and biosorption time of 120 min). All Cd(II) biosorption processes onto three adsorbents complied with the Langmuir isotherm model and the pseudo-second-order kinetic equation, and spontaneously occurred in an order of AADC > AADB > AAD. The difference in biosorption quantity relied on variation in surface structure, crystal species and element content caused by composting or pyrolysis. Composting enhanced the changes in surface structure, crystal species, functional groups and ion exchange capacity of the AAD, resulting in AAD had greatly improved the biosorption quantity of Cd(II). Pyrolysis increased the adsorption of Cd(II) mainly by increasing the Brunauer-Emmett-Teller (BET) surface area, the particle size and pH, in the same time, providing more oxygen-containing functional groups.

Chitin/Chitosan: Versatile Ecological, Industrial, and Biomedical Applications

Chitin is a linear polysaccharide of N-acetylglucosamine, which is highly abundant in nature and mainly produced by marine crustaceans. Chitosan is obtained by hydrolytic deacetylation. Both polysaccharides are renewable resources, simply and cost-effectively extracted from waste material of fish industry, mainly crab and shrimp shells. Research over the past five decades has revealed that chitosan, in particular, possesses unique and useful characteristics such as chemical versatility, polyelectrolyte properties, gel- and film-forming ability, high adsorption capacity, antimicrobial and antioxidative properties, low toxicity, and biocompatibility and biodegradability features. A plethora of chemical chitosan derivatives have been synthesized yielding improved materials with suggested or effective applications in water treatment, biosensor engineering, agriculture, food processing and storage, textile additives, cosmetics fabrication, and in veterinary and human medicine. The number of studies in this research field has exploded particularly during the last two decades. Here, we review recent advances in utilizing chitosan and chitosan derivatives in different technical, agricultural, and biomedical fields.

Two-step grafting of 2-hydroxyethyl methacrylate (HEMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) onto a polyethylene plate for enhancement of Cr(VI) ion adsorption

Polyethylene (PE) plates grafted with a neutral monomer, 2-hydroxyethyl methacrylate (HEMA), and a cationic monomer, 2-(dimethylamino)ethyl methacrylate (DMAEMA), (PE-g-PHEMA)-g-PDMAEMA plates were prepared by the two-step photografting. The Cr(VI) ion adsorption behavior of the (PE-g-PHEMA)-g-PDMAEMA plates was investigated as a function of the amounts of grafted HEMA, amount of grafted DMAEMA, initial pH value, and temperature. The adsorption capacity of the DMAEMA-grafted PE (PE-g-PDMAEMA) and (PE-g-PHEMA)-g-PDMAEMA plates had the maximum value at the initial pH value of 3.0, independent of the temperature. The adsorption capacity of (PE-g-PHEMA)-g-PDMAEMA plates increased with the amount of grafted HEMA (G_HEMA) in the first-step grafting. The increase in the water absorptivity of the grafted layers and thereby the increase in the degree of protonation of dimethylamino groups on grafted PDMAEMA chains were found to lead to the increase in the adsorption capacity. This adsorption capacity was higher than or comparable to those of other polymeric adsorbents for Cr(VI) ions. The Cr(VI) ion adsorption behavior on both PE-g-DMAEMA and (PE-g-PHEMA)-g-PDMAEMA plates obeyed the mechanism of the pseudo-second-order kinetic model and was well expressed by Langmuir isotherm. The high values of the Langmuir constant suggest that the adsorption of Cr(VI) ions occurs through an electrostatic interaction between protonated dimethylamino groups on grafted PDMAEMA chains and HCrO4- ions. Cr(VI) ions were successfully desorbed from PE-g-PDMAEMA and (PE-g-PHEMA)-g-PDMAEMA plates in eluents such as NaCl, NaCl containing NaOH, NH₄Cl, NH₄Cl containing NaOH, and NaOH.

Enhanced adsorption for Pb(II) and Cd(II) of magnetic rice husk biochar by KMnO4 modification

Novel KMnO₄-treated magnetic biochar (FMBC) was successfully synthesized by addition of Fe(NO₃)₃ during carbonization and KMnO₄ treatment following for Pb(II) and Cd(II) adsorption. SEM-EDS, XPS, and ICP-AES were used to evaluate the FMBC and magnetic biochar (FBC) on surface morphology, surface chemistry characteristics, surface functional groups, and Pb(II) and Cd(II) adsorption behavior. Results showed that the Langmuir maximum adsorption quantity of FMBC reached 148 mg/g for Pb(II) and 79 mg/g for Cd(II), nearly 7 times of that of FBC. The enhancement of FMBC for heavy metal adsorption was due to the successful load of manganese oxides and the increased oxygen functional groups consistent with XPS and FTIR results. The adsorption capacities of FMBC were maintained over 95% when the pH value was higher than 2.5 and 3.5 for Pb(II) and Cd(II), respectively. The adsorption performances of both heavy metals by FMBC were hardly influenced by ionic strength and humid acid. The adsorption capacities of FMBC could maintain over 50% and 87% after four cycles for Pb(II) and Cd(II), respectively. The saturation magnetization of FMBC was about 11.5 emu/g, which did not change after adsorption. This work proposed a new method to fabricate a magnetic biochar with high adsorption capacities of heavy metals Pb(II) and Cd(II).

Iron oxide/carbon nanotubes/chitosan magnetic composite film for chromium species removal

An adsorbent in the form of a CLCh/MWCNT/Fe film was prepared using multiple walled carbon nanotubes (MWCNT) doped with magnetic iron oxide and deposited in crosslinked chitosan (CLCh). The CLCh/MWCNT/Fe was characterized by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), nitrogen (N₂) adsorption/desorption, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS), Infrared Spectroscopy (IR) and Raman Spectroscopy. The CLCh/MWCNT/Fe film presented a maximum adsorption capacity for Cr(III) of 66.25 mg/g (150 min) and for Cr(VI) of 449.30 mg/g (60 min) at 25 °C. The CLCh/MWCNT/Fe can be easily removed from the aqueous solution by a mechanical separation or by magnetization due to its magnetic properties. In ten consecutive reutilization adsorption cycles the CLCh/MWCNT/Fe film presented efficiency losses of only 12% and 6% for the removal of Cr(III) and Cr(VI), respectively.

Biochar synthesized via pyrolysis of Broussonetia papyrifera leaves: mechanisms and potential applications for phosphate removal

In this study, Broussonetia papyrifera leaves collected from land near a restored manganese mine in the Hunan Province of China were converted into biochar under high-temperature anaerobic conditions, regeneration and utilization of agricultural and forest waste, and applied to the prevention of eutrophication. The physicochemical properties of the B. papyrifera biochar were characterized using Micromeritics 3Flex analyzer, scanning electron microscope (SEM), Fourier transform infrared spectrometer (FT-IR), thermogravimetric analyzer (TGA), X-ray photoelectron spectrometer (XPS), zeta potential meter (zeta), and X-ray diffraction (XRD). The effects of pH, ionic strength, coexisting ions, time, initial concentration, and temperature on the decontamination process of phosphate in water were studied. The results indicated that adsorption was enhanced under alkaline conditions. The pseudo-second-order model of adsorption kinetics was applied to illustrate the adsorption processes. The chemical adsorption reaction was the main rate-limiting step in the adsorption process. Isotherm experimental data were best fitted by the Freundlich model at 25 °C and by the Langmuir model at 35 °C. The phosphate combined with B. papyrifera biochar mainly in the forms of exchangeable phosphorus (Ex-P), Al-bound phosphorus (Al-P), and Fe-bound phosphorus (Fe-P). These results indicate that B. papyrifera biochar is a suitable candidate for the treatment of a eutrophic body of water.

Performance of chitosan engraved iron and lanthanum mixed oxyhydroxide for the detoxification of hexavalent chromium

The iron - lanthanum mixed oxyhydroxide (FLMOH) and chitosan engraved iron - lanthanum mixed oxyhydroxide materials (CSFLMOH) were prepared successfully and utilized for the hexavalent chromium adsorption studies. The physicochemical properties of pristine and Cr(VI) treated adsorbents were characterized using XRD, FTIR, SEM with EDX, TGA and DSC analysis. The efficacy of the CSFLMOH was compared with FLMOH towards the uptake of Cr(VI) ions and was explored using batch technique under various influencing parameters viz., time, dose, pH, initial concentration and co-existing anions. Langmuir, Freundlich and Dubinin - Radushkevich isotherms were used to analyze the adsorption behavior at 303, 313 and 323 K. The rate of the reaction was calculated using reaction based and diffusion-based models. Recycle and reuse studies were demonstrated using 0.05 M NaOH as the desorbing medium.

Highly adsorptive chitosan/saponin-bentonite composite film for removal of methyl orange and Cr(VI)

Robust and simple composite films for the removal of methyl orange (MO) and Cr(VI) have been prepared by combining chitosan, saponin, and bentonite at a specific ratio. There are several composite films (chitosan-saponin-bentonite (CSB)) prepared; among them, the composite films CSB_2:3 and CSB_1:1 have the highest removal efficiency toward MO and Cr(VI) where the maximum removal is 70.4% (pH 4.80) and 92.3% (pH 5.30), respectively. It was found that different types of adsorbate have different thermodynamic properties of the adsorption process; the adsorption of MO onto CSB_2:3, chitosan, and acid-activated bentonite (AAB) proceeded endothermically, while the adsorption of Cr(VI) onto CSB_1:1, chitosan, and AAB proceeded exothermically. The parameters of the adsorption were modeled by using isotherm and kinetic equations. The models of Langmuir, Freundlich, Redlich-Peterson, Sips, and Toth were used for fitting the adsorption isotherm data at a temperature of 30, 45, and 60 °C; all of the isotherm models could represent the data well. The result indicates that CSB_2:3 has the highest adsorption capacity toward MO with q_m of 360.90 mg g^-1 at 60 °C; meanwhile, CSB_1:1 has the highest adsorption capacity toward Cr(VI) with q_m 641.99 mg g^-1 at 30 °C. The pseudo-second-order model could represent the adsorption kinetics data better than the pseudo-first-order equation. The adsorption mechanism was proposed, and the thermodynamic properties of the adsorption were also studied.

Phosphonium-enhanced chitosan for Cr(VI) adsorption in wastewater treatment

Adsorption is a commonly used method for industrial wastewater treatment because of its low-cost, easy operation and high efficiency. In this work, chitosan was crosslinked and functionalized with a low-cost phosphonium salt, tetrakis(hydroxymethyl)phosphonium sulfate (THPS), to enhance its adsorption capacity for Cr(VI). The novel phosphonium-crosslinked chitosan (PCC) was characterized using elemental analysis, XRF, FTIR, NMR and SEM-EDX. At pH 6, PCC had a higher Langmuir equilibrium constant than the unmodified chitosan (0.19 ± 0.02 L mg^-1 versus 0.0044 ± 0.0005 L mg^-1) and PCC demonstrated higher adsorption capacity than chitosan at equilibrium Cr(VI) concentrations below 120 mg L^-1. Additionally, magnesium sulfate or magnesium chloride was shown to desorb Cr(VI) and recycle PCC. When treated with THPS, chitosan is activated for Cr(VI) adsorption at pH 6; therefore, PCC can be used in wastewater treatment over a wider pH range than chitosan.

A versatile β-cyclodextrin and polyethyleneimine bi-functionalized magnetic nanoadsorbent for simultaneous capture of methyl orange and Pb(II) from complex wastewater

Ascribing to their significant differences in physicochemical properties, it is extremely challenging to treat complex wastewater containing more than one class of pollutants via one-step treatment. Here, we focused on disposal of complex wastewater bearing organic dye and heavy metal by using adsorptive method. Thus, by combining the advantages of polyethyleneimine (PEI), β-cyclodextrin (β-CD) as well as Fe₃O₄ magnetic nanoparticles, a versatile β-CD and PEI bi-functionalized magnetic nanoadsorbent (Fe₃O₄-PEI/β-CD) with spatially separated sorption sites was successfully constructed for simultaneous capture of methyl orange (MO) and Pb(II) in complex wastewater. In this setting, β-CD cavities and positively charged N-containing groups of PEI were mainly responsible for removal of MO via host-guest inclusion and electrostatic attraction, respectively, and oxygen-bearing groups on the edge of β-CD as well as the free amino moieties in PEI acted as the active sites for Pb(II) uptake. In their individual mono-pollutant system, the adsorption processes can be better described via applying pseudo-second-order kinetic and Langmuir isotherm models. Interestingly, presence of MO in Pb(II)-MO binary system significantly promoted the uptake of Pb(II). But the coexisting Pb(II) had almost no effects on MO uptake. Such results demonstrated that both MO and Pb(II) could be simultaneously and synergistically removed by Fe₃O₄-PEI/β-CD through multiple mechanisms (such as electrostatic attraction, host-guest inclusion, chelating, etc.). Particularly, the excellent regeneration and stability make Fe₃O₄-PEI/β-CD an ideal integrative adsorbent for purification of actual wastewater contaminated by MO and Pb(II). Thus, this study provides some insights into designing a well-performed and easily recyclable adsorbent for simultaneous and synergetic capture of both organic and inorganic contaminants in complex wastewater.

Enhanced removal of ciprofloxacin using humic acid modified hydrogel beads

In this study, humic acid coated biochar (HA-BC) and chitosan were combined to prepare an adsorbent with enhanced reactivity for the removal of ciprofloxacin (CIP). With initial CIP concentrations of 250 mg/L, the maximum adsorbed amount was 154.89 mg/g. Removal rates reached equilibrium after 12 h, obeying the pseudo second-order kinetic model. Adsorption isotherm data was better fitted to the Langmuir isotherm model. The sorption capacity of humic acid-biochar/chitosan hydrogel beads (HBCB) decreased by 11.42%, 6.66%, 9.32%, and 23.92% in the presence of NaCl, NaNO₃, Na₂SO₄, and Na₃PO₄, respectively. A complex mechanism was found to be responsible for the adsorptive removal of CIP including, hydrogen bonding, π-π electron donor-acceptor (EDA) interactions and hydrophobic interactions. After four regeneration steps, sorption capacity remained sufficient (61.23 mg/g). These removal results indicate that HBCB is durable and effective for long term CIP removal.