Recent developments in the field of screen-printed electrodes and their related applications

Electrochemically Active Thin Carbon Films with Enhanced Adhesion to Silicon Substrates

Thin carbon films deposited on technologically relevant substrates, such as silicon wafers, can be easily implemented in miniaturized electrochemical devices and used for sensing applications. However, a major issue in most carbon films is the weak film/substrate adhesion that shortens the working device lifetime. This paper describes the facile preparation of robust thin carbon films on silicon substrates by one-pot sol-gel synthesis. The improved adherence of these carbon films is based on the incorporation of silica through the controlled synthesis of a resorcinol/formaldehyde gel modified with aminopropyltriethoxysilane. The films demonstrate excellent adhesion to the silicon substrate, good homogeneity, excellent electrical conductivity and superior electrochemical performance. Moreover, this approach opens the door to the fabrication of carbon thin-film electrodes by photolithographic techniques.

Recent Advances in the Fabrication and Application of Screen-Printed Electrochemical (Bio)Sensors Based on Carbon Materials for Biomedical, Agri-Food and Environmental Analyses

This review describes recent advances in the fabrication of electrochemical (bio)sensors based on screen-printing technology involving carbon materials and their application in biomedical, agri-food and environmental analyses. It will focus on the various strategies employed in the fabrication of screen-printed (bio)sensors, together with their performance characteristics; the application of these devices for the measurement of selected naturally occurring biomolecules, environmental pollutants and toxins will be discussed.

Effect of Nanoparticles on Modified Screen Printed Inhibition Superoxide Dismutase Electrodes for Aluminum

A novel amperometric biosensor for the determination of Al(III) based on the inhibition of the enzyme superoxide dismutase has been developed. The oxidation signal of epinephrine substrate was affected by the presence of Al(III) ions leading to a decrease in its amperometric current. The immobilization of the enzyme was performed with glutaraldehyde on screen-printed carbon electrodes modifiedwith tetrathiofulvalene (TTF) and different types ofnanoparticles. Nanoparticles of gold, platinum, rhodium and palladium were deposited on screen printed carbon electrodes by means of two electrochemical procedures. Nanoparticles were characterized trough scanning electronic microscopy, X-rays fluorescence, and atomic force microscopy. Palladium nanoparticles showed lower atomic force microscopy parameters and higher slope of aluminum calibration curves and were selected to perform sensor validation. The developed biosensor has a detection limit of 2.0 ± 0.2 μM for Al(III), with a reproducibility of 7.9% (n = 5). Recovery of standard reference material spiked to buffer solution was 103.8% with a relative standard deviation of 4.8% (n = 5). Recovery of tap water spiked with the standard reference material was 100.5 with a relative standard deviation of 3.4% (n = 3). The study of interfering ions has also been carried out.

Graphene-based screen-printed electrochemical (bio)sensors and their applications: Efforts and criticisms

K.S. Novoselov in his Nobel lecture (December 8, 2010), described graphene as "more than just a flat crystal" and summarized the best possible impression of graphene with (i) it is the first example of 2D atomic crystals, (ii) it demonstrated unique electronic properties, thanks to charge carriers which mimic massless relativistic particles, and (iii) it has promise for a number of applications. The fascinating and unusual properties of this 2D material were indeed recently investigated and exploited in several disciplines including physics, medicine, and chemistry, indicating the extremely versatile and polyedric aspect of this nanomaterial. The utilization of nanomaterials, printed technology, and microfluidics in electroanalysis has resulted in a period that can be called the "Electroanalysis Renaissance" (Escarpa, 2012) in which graphene is without any doubt a forefront nanomaterial. The rise in affordable fabrication processes, along with the great dispersing attitude in a plenty of matrices, have made graphene powerful in large-scale production of electrochemical platforms. Herein, we overview the employment of graphene to customize and/or fabricate printable based (bio)sensors over the past 5 years, including several modification approaches such as drop casting, screen- and inkjet-printing, different strategies of graphene-based sensing, and applications as well. The objective of this review is to provide a critical perspective related to advantages and disadvantages of using graphene in biosensing tools, based on screen-printed sensors.

Improved Manufacturing Performance of Screen Printed Carbon Electrodes through Material Formulation

Printed carbon graphite materials are the primary common component in the majority of screen printed sensors. Screen printing allows a scalable manufacturing solution, accelerating the means by which novel sensing materials can make the transition from laboratory material to commercial product. A common bottleneck in any thick film printing process is the controlled drying of the carbon paste material. A study has been undertaken which examines the interaction between material solvent, printed film conductivity and process consistency. The study illustrates that it is possible to reduce the solvent boiling point to significantly increase process productivity while maintaining process consistency. The lower boiling point solvent also has a beneficial effect on the conductivity of the film, reducing the sheet resistance. It is proposed that this is a result of greater film stressing increasing charge percolation through greater inter particle contact. Simulations of material performance and drying illustrate that a multi layered printing provides a more time efficient manufacturing method. The findings have implications for the volume manufacturing of the carbon sensor electrodes but also have implications for other applications where conductive carbon is used, such as electrical circuits and photovoltaic devices.

Fundamentals, achievements and challenges in the electrochemical sensing of pathogens

Electrochemical sensors are powerful tools widely used in industrial, environmental and medical applications. The versatility of electrochemical methods allows for the investigation of chemical composition in real time and in situ. Electrochemical detection of specific biological molecules is a powerful means for detecting disease-related markers. In the last 10 years, highly-sensitive and specific methods have been developed to detect waterborne and foodborne pathogens. In this review, we classify the different electrochemical techniques used for the qualitative and quantitative detection of pathogens. The robustness of electrochemical methods allows for accurate detection even in heterogeneous and impure samples. We present a fundamental description of the three major electrochemical sensing methods used in the detection of pathogens and the advantages and disadvantages of each of these methods. In each section, we highlight recent breakthroughs, including the utilisation of microfluidics, immunomagnetic separation and multiplexing for the detection of multiple pathogens in a single device. We also include recent studies describing new strategies for the design of future immunosensing systems and protocols. The high sensitivity and selectivity, together with the portability and the cost-effectiveness of the instrumentation, enhances the demand for further development in the electrochemical detection of microbes.

Exploiting plug-and-play electrochemistry for drug discovery

Electrochemistry has emerged as a powerful analytical technique for chemical analysis of living cells, biologically active molecules and metabolites. Electrochemical biosensor, microfluidics and mass spectrometry are the most frequently used methods for electrochemical detection and monitory, which comprise a collection of extremely useful measurement tools for various fields of biology and medicine. Most recently, electrochemistry has been shown to be coupled with nanotechnology and genetic engineering to generate new enabling technologies, providing rapid, selective, and sensitive detection and diagnosis platforms. The primary focus of this review is to highlight the utility of electrochemical strategies and their conjunction with other approaches for drug metabolism and discovery. Current challenges and possible future developments and applications of electrochemistry in drug studies are also discussed.

Competitive immunosensor based on gliadin immobilization on disposable carbon-nanogold screen-printed electrodes for rapid determination of celiotoxic prolamins

The first competitive disposable amperometric immunosensor based on gliadin-functionalized carbon/nanogold screen-printed electrodes was developed for rapid determination of celiotoxic prolamins. To date, no competitive spectrophotometric or electrochemical immunoassays have yet been successfully applied to gluten detection in processed food samples, which require the use of complex prolamin extraction solutions containing additives with denaturing, reducing and disaggregating functions. Thus, in this work, great effort was put into the optimization and performance evaluation of the immunosensor in terms of suitability as a screening tool for analysis of cereal-based food samples. For this purpose, aqueous ethanol or complex extraction mixtures, as the patented Cocktail Solution®, were proved effective in the extraction of gliadin. Good sensitivity was achieved after optimization of the immunocompetitive assay, giving limit of detection and limit of quantitation of 8 and 22 ng/ml of gliadin, respectively, for ethanol extracts. The immunosensor was proved to be suitable also for samples extracted with Cocktail Solution® after a proper dilution. Analysis of real samples of different flours proved the suitability of the immunosensing device as a powerful tool for safety assessment of raw materials used for the formulation of dietary products for celiac disease patients. This immunosensor combines good analytical performance using a very simplified set-up protocol with suitability for rapid screening analysis performed using inexpensive and portable instrumentation. Graphical abstract Depiction of the development and working principle of the competitive immunosensor.

Deposition, patterning, and utility of conductive materials for the rapid prototyping of chemical and bioanalytical devices

Rapid prototyping is a critical step in the product development cycle of miniaturized chemical and bioanalytical devices, often categorized as lab-on-a-chip devices, biosensors, and micro-total analysis systems. While high throughput manufacturing methods are often preferred for large-volume production, rapid prototyping is necessary for demonstrating and predicting the performance of a device and performing field testing and validation before translating a product from research and development to large volume production. Choosing a specific rapid prototyping method involves considering device design requirements in terms of minimum feature sizes, mechanical stability, thermal and chemical resistance, and optical and electrical properties. A rapid prototyping method is then selected by making engineering trade-off decisions between the suitability of the method in meeting the design specifications and manufacturing metrics such as speed, cost, precision, and potential for scale up. In this review article, we review four categories of rapid prototyping methods that are applicable to developing miniaturized bioanalytical devices, single step, mask and deposit, mask and etch, and mask-free assembly, and we will focus on the trade-offs that need to be made when selecting a particular rapid prototyping method. The focus of the review article will be on the development of systems having a specific arrangement of conductive or semiconductive materials.

Electroanalytical devices with pins and thread

This work describes the adaptive use of conventional stainless steel pins-used in unmodified form or coated with carbon paste-as working, counter, and quasi-reference electrodes in electrochemical devices fabricated using cotton thread or embossed omniphobic R(F) paper to contain the electrolyte and sample. For some applications, these pin electrodes may be easier to modify and use than printed electrodes, and their position and orientation can be changed as needed. Electroanalytical devices capable of multiplex analysis (thread-based arrays or 96-well plates) were easily fabricated using pins as electrodes in either thread or omniphobic R(F) paper.

Recent development of carbon electrode materials and their bioanalytical and environmental applications

New synthetic approaches, materials, properties, electroanalytical applications and perspectives of carbon materials are presented.

Thin-layer voltammetry of soluble species on screen-printed electrodes: proof of concept

Thin-layer diffusion conditions were accomplished on screen-printed electrodes by placing a controlled-weight onto the cast solution and allowing for its natural spreading.

Ascorbate Oxidase-Based Amperometric Biosensor for l-Ascorbic Acid Determination in Beverages

A novel biosensor for l-ascorbic acid determination in different beverages was elaborated. The ascorbate oxidase enzyme (AAO) from Cucurbita sp., EC 1.10.3.3, was immobilized on a screen-printed carbon electrode with poly(ethylene glycol) (400) diglycidyl ether (PEGDGE) as a crosslinking agent. The standards and samples were measured first with a blank electrode. An inert protein, bovine serum albumin (BSA), was immobilized on the surface of this electrode with PEGDGE. The BSA mass was equivalent to the mass of 10 U of AAO enzyme immobilized on the electrodes (0.021 mg). The linear measuring range for l-ascorbic acid was between 5 and 150 µmol/L. As l-ascorbic acid is a vital vitamin and a common antioxidant used in food industry, fruit juices and vitamin C effervescent tablets were examined. The results were compared to HPLC measurements.

Screen-Printing of ZnO Nanostructures from Sol-Gel Solutions for Their Application in Dye-Sensitized Solar Cells

Diblock copolymers have been used in sol-gel synthesis to successfully tailor the nanoscale morphology of thin ZnO films. As the fabrication of several-micron-thick mesoporous films such as those required in dye-sensitized solar cells (DSSCs) was difficult with this approach, we exploited the benefits of diblock-copolymer-directed synthesis that made it compatible with screen printing. The simple conversion of the diblock copolymer ZnO precursor sol to a screen-printing paste was not possible as it resulted in poor film properties. To overcome this problem, an alternative route is proposed in which the diblock copolymer ZnO precursor sol is first blade coated and calcined, then converted to a screen-printing paste. This allows the benefits of diblock-copolymer-directed particle formation to be compatible with printing methods. The morphologies of the ZnO nanostructures were studied by SEM and correlated with the current density-voltage characteristics.

A review on amperometric-type immunosensors based on screen-printed electrodes

In this brief review, we summarize the recent research activities involved in the development of amperometric-type immunosensors based on screen-printed electrodes (SPEs). We focus on the underlying principle involved in these types of sensors, their fabrication and electrode surface modification. We also discuss the various factors involved in the designing of such immunosensors and how they affect their performances. Finally we provide an insight into the drawbacks associated with these SPEs.

A chronoamperometric screen printed carbon biosensor based on alkaline phosphatase inhibition for W(IV) determination in water, using 2-phospho-L-ascorbic acid trisodium salt as a substrate

This paper presents a chronoamperometric method to determine tungsten in water using screen-printed carbon electrodes modified with gold nanoparticles and cross linked alkaline phosphatase immobilized in the working electrode. Enzymatic activity over 2-phospho-l-ascorbic acid trisodium salt, used as substrate, was affected by tungsten ions, which resulted in a decrease of chronoamperometric current, when a potential of 200 mV was applied on 10 mM of substrate in a Tris HCl buffer pH 8.00 and 0.36 M of KCl. Calibration curves for the electrochemical method validation, give a reproducibility of 5.2% (n = 3), a repeatability of 9.4% (n = 3) and a detection limit of 0.29 ± 0.01 µM. Enriched tap water, purified laboratory water and bottled drinking water, with a certified tungsten reference solution traceable to NIST, gave a recovery of 97.1%, 99.1% and 99.1% respectively (n = 4 in each case) and a dynamic range from 0.6 to 30 µM. This study was performed by means of a Lineweaver-Burk plot, showing a mixed kinetic inhibition.

Enhanced electrochemical sensing of polyphenols by an oxygen-mediated surface

We report a straightforward heat treatment in air of commercial screen-printed carbon electrodes (SPCE) at different temperatures and times (ht-SPCE) that produces considerable electrocatalytic effects.

Novel screen printed potentiometric sensors for the determination of oxicams

Screen printed sensors based on carbon nanotubes/β-cyclodextrin nanocomposite was applied for potentiometric determination of oxicam derivatives. Sensors showed improved potential stability and lifetime detection limit of 6 × 10⁻⁷ mol L⁻¹.

Electrochemical signatures of multivitamin mixtures

Distinct electrochemical signatures of multivitamins using cyclic square wave voltammetry at a disposable screen printed electrode.

Toward point-of-care diagnostics with consumer electronic devices: the expanding role of nanoparticles

A review of the role that nanoparticles can play in point-of-care diagnostics that utilize consumer electronic devices such as cell phones and smartphones for readout, including an overview of important concepts and examples from the literature.

“One-drop-of-blood” electroanalysis of lead levels in blood using a foam-like mesoporous polymer of melamine–formaldehyde and disposable screen-printed electrodes

A foam-like mesoporous melamine–formaldehyde polymer was synthesized and deposited on disposable screen-printed electrodes for the electroanalysis of Pb²⁺ ions in blood.

Amperometric measurements of ethanol on paper with a glucometer

Recent advances in electrochemical analysis on filter paper exemplify the versatility of this substrate for high performance testing. Its low-cost, light-weight, and environmentally friendly properties make it particularly attractive for applications in addressing health and environmental safety needs in low-resource settings and developing countries. However, the main drawback to sensitive electrochemical testing is the use of a potentiostat, a bench-top instrument that is extremely expensive, thereby negating the some of the benefits of paper-based devices. Hence there is a need to develop paper-devices for use with handheld, portable device readers that can extract quantitative readouts. In this study, we developed a method to use micro-paper electrochemical devices, or µPEDs, with a glucose meter, which are used for personal monitoring of blood glucose levels. Ethanol was chosen as a model target analyte due to its importance in the global issue of road safety. µPEDs were simple in design and could be tested with a potentiostat. We observed that inclusion of the stabilizer trehalose was critical to preparing µPEDs for later analysis. In addition, an NAD(+)-dependent enzyme was used to impart selectivity to the biosensor, which also represents a class of enzymes with targets relevant to the health and food industry.