Determination and comparison of nitrated-polycyclic aromatic hydrocarbons measured in air and diesel particulate reference materials

Nitration of benzo[a]pyrene adsorbed on coal fly ash particles by nitrogen dioxide: role of thermal activation

Nitration of benzo[a]pyrene (BaP) by nitrogen dioxide (NO2) adsorbed on the surface of thermally activated coal fly ash and model aluminosilicate particles led to the formation of nitrobenzo[a]pyrenes as verified by extraction and gas chromatography/mass spectrometry (GC/MS). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was utilized to follow the nitration reaction on the surface of zeolite Y. Nitrobenzo[a]pyrene formation was observed along with the formation of nitrous acid and nitrate species. The formation of the BaP radical cation was also observed on thermally activated aluminosilicate particles by electron spin resonance (ESR) spectroscopy. On the basis of GC/MS, DRIFTS, and ESR spectroscopy results, a mechanism of nitration involving intermediate BaP radical cations generated on thermally activated aluminosilicate particles is proposed. These observations have led to the hypothesis that nitration of adsorbed polyaromatic hydrocarbons on coal fly ash by reaction with nitrogen oxides can occur in the smokestack, but with the aging of the fly ash particles, the extent of the nitration reaction will be diminished.

Genotoxic damage in mine workers exposed to diesel exhaust, and the effects of glutathione transferase genotypes

This study was performed in an Estonian shale-oil mine with the purpose to develop and apply a number of biomarkers for occupational diesel-exhaust exposure monitoring. Increased breathing-zone exposures to exhaust from operators of diesel-powered trucks in the mine was confirmed in the environmental monitoring part of the study, showing a 7.5-fold higher exposure to particle-associated 1-nitropyrene (1-NP) in 50 underground workers compared with 42 surface workers [P.T.J. Scheepers, D. Coggon, L.E. Knudsen, R. Anzion, H. Autrup, S. Bogovski, R.P. Bos, D. Dahmann, P. Farmer, E.A. Martin, V. Micka, V. Muzyka, H.-G. Neumann, J. Poole, A. Schmidt-Ott, F. Seiler, J. Volf, I. Zwirner-Baier, Biomarkers for occupational diesel exhaust exposure monitoring (BIOMODEM)-a study in underground mining, Toxicol. Lett. 134 (2002) 305-317; P.T.J. Scheepers, V. Micka, V. Muzyka, R. Anzion, D. Dahmann, J. Poole, R.P. Bos, Exposure to dust and particle-associated 1-nitropyrene of drivers of diesel-powered equipment in underground mining, Ann. Occp. Hyg. 47 (2003) 379-388]. Analysis of DNA damage by the Comet assay on frozen blood samples was performed on the total study group and showed significantly higher levels (p=0.003) in underground workers (smokers) driving diesel-powered excavation machines (median 155 on a scale from 0 to 400, among 47 persons), compared with surface workers who smoked (median of 90, among 46 persons). The level of DNA damage in underground smokers was significantly higher (p=0.04) than in non-smokers. Samples from 2 of the 3 sampling weeks had significantly lower DNA damage compared with the third week, probably due to timely processing and freezing. These samples also showed significant differences (p<0.001) between underground workers (median 145, among 41 persons) and surface workers (median 60, among 30 persons). An HPLC method was developed for the analysis of (32)P-postlabelled 1-NP-DNA-adducts, and was applied to a sub-sample of 20 workers. No significant differences between surface and underground workers were found in this sub-sample with respect to the minor, unidentified adducts that had similar chromatographic properties to 1-NP adducts, and smoking did not have any effect on adduct levels. No significant effects of the genotypes of GSTM1, GSTP1 and GSTT1 on DNA-adducts and on DNA damage as measured by the Comet assay were found in the total study group. The study confirms an increased level of DNA damage in workers exposed to exhaust from truck-driving in the mine. However, the results of the environmental and biological monitoring of 1-NP did not correlate, suggesting that inhalation exposure to diesel exhaust is not reflected by an increase in 1-NP-DNA-adduct levels and/or that factors other than occupational exposure to diesel exhaust are primary determinants of these DNA-adduct levels.

Characteristic study of polycyclic aromatic hydrocarbons for fine and coarse particulates at Pastureland near Industrial Park sampling site of central Taiwan

The concentrations of ambient air polycyclic aromatic hydrocarbons were measured in a farm area (Tunghai University Pastureland) between August 2001 and April 2002 in central Taiwan, Taichung. Particle-bound polycyclic aromatic hydrocarbons (PAHs) were collected on quartz filters, the collected sample was extracted with a dichloromethane (DCM)/n-hexane mixture (50/50, v/v) for 24 h, and then the extracts were subjected to gas chromatography-mass spectrometric analysis. The PM2.5 (fine particulate) and PM2.5-10 (coarse particulate) total PAHs concentrations at the Tunghai University Pastureland sampling site were found to be 180.62 ngm(-3) and 164.98 ngm(-3), respectively. In general, the concentrations of polycyclic aromatic hydrocarbons were higher in spring and winter than those of summer and autumn for either PM2.5 or PM2.5-10 in Pastureland in central Taiwan. Moreover, coarse particulates are the dominant species during the dust storm season (March and April) in central Taiwan.

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM10, PM2.5 and PM1 were assessed.

Development of an analytical method for polycyclic aromatic hydrocarbons and their derivatives

The possibilities of utilising pressurised liquid extraction for five nitro-polycyclic aromatic hydrocarbons from an inert matrix are shown. Different extraction temperatures and pressures were tested. The highest recoveries were obtained at extraction pressure 14 MPa and temperature 100 C. Separation of non-polar, aromatic and polar fractions by the silica gel column chromatography is shown. n-Hexane, cyclohexane and dichloromethane as a solvent were tested. The best separations of monitored fractions were obtained, when extract was dissolved in cyclohexane. Non-polar and aromatic fractions eluted together when the extract was dissolved in dichloromethane.

Development of a sequential supercritical fluid extraction method for the analysis of nitrated and oxygenated derivatives of polycyclic aromatic hydrocarbons in urban aerosols

A two-step supercritical fluid extraction (SFE) method has been developed for the analysis of oxygenated and nitrated polycyclic aromatic hydrocarbons (oxy- and nitro-PAHs, respectively) present in urban aerosol samples. The proposed SFE procedure first involves an extraction step using pure CO2 in order to remove the less polar compounds from the matrix and a second consecutive step using toluene-modified CO2. The oxy- and nitro-PAHs are obtained in the second step. Parameters affecting both collection efficiencies and the selective extraction of oxy- and nitro-PAHs in the second SFE step were optimised. Analysis of the extracts was performed using gas chromatography with electron-capture detection and coupled to mass spectrometry. The proposed SFE method was compared with a conventional extraction technique such as sonication and good agreement in the results was obtained. Nevertheless, clean up of sonication extracts was needed, whereas no purification was necessary for SFE extracts. The SFE method was applied to the analysis of oxy- and nitro-PAHs in urban aerosol samples and 9-fluorenone, 9,10-anthraquinone, 2-methyl-9,10-anthraquinone, benzanthrone, benz[a]anthracene-7,12-dione and 1-nitropyrene were identified at concentrations ranging between 15 and 364 pg m(-3).

Developments in the use of chromatographic techniques in marine laboratories for the determination of halogenated contaminants and polycyclic aromatic hydrocarbons

Chromatography has been an important tool in marine laboratories. Since the 1960s, marine laboratories have been involved in the analysis of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and brominated flame retardants (BFRs). Column chromatography and liquid chromatography (LC) techniques have been used, mainly in the clean-up phase, while gas chromatography (GC) has been used extensively in the final determination of these contaminants. Developments have been observed from the use of packed GC columns, via capillary columns to the use of heart-cut multi-dimensional GC and comprehensive multi-dimensional GC. The progress made in interlaboratory studies and the availability of certified reference materials are discussed.

Determination of nitrated polycyclic aromatic hydrocarbons in diesel particulate-related standard reference materials by using gas chromatography/mass spectrometry with negative ion chemical ionization

Gas chromatography/mass spectrometry (GC/MS) with negative ion chemical ionization (NICI) detection was utilized for quantitative determination of nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) in diesel particulate-related standard reference materials (SRMs). Prior to GC/MS analysis, isolation of the nitro-PAHs from the complex diesel particulate extract was accomplished using solid phase extraction (SPE) and normal-phase liquid chromatographic (LC) fractionation using an amino/cyano stationary phase. Concentrations of eight to ten mononitro-PAHs and three dinitropyrenes were determined in three diesel particulate-related SRMs: SRM 1650a Diesel Particulate Matter, SRM 1975 Diesel Particulate Extract, and SRM 2975 Diesel Particulate Matter (Industrial Forklift). The results from GC/MS NICI using two different columns (5% phenyl methylpolysiloxane and 50% phenyl methylpolysiloxane) were compared to each other and to results from two other laboratories for selected nitro-PAHs. 1-Nitropyrene was the most abundant nitro-PAHs in each of the diesel particulate SRMs (19.8+/-1.1 micro g g(-1) particle in SRM 1650a and 33.1+/-0.6 micro g g(-1) particle in SRM 2975). Three dinitropyrene isomers were measured in SRM 1975 at 0.5-1.4 micro g g(-1) extract and in SRM 2975 at 1-3 micro g g(-1) particle.