The concept of the alpha-amylase family: structural similarity and common catalytic mechanism

The cyclodextrin glycosyltransferase of Paenibacillus pabuli US132 strain: molecular characterization and overproduction of the recombinant enzyme

The gene encoding the cyclodextrin glycosyltransferase (CGTase) of Paenibacillus pabuli US132, previously described as efficient antistaling agent and good candidate for cyclodextrins production, was cloned, sequenced, and expressed in Escherichia coli. Sequence analysis showed that the mature enzyme (684 amino acids) was preceded by a signal peptide of 34 residues. The enzyme exhibited the highest identity (94%) to the beta-CGTase of Bacillus circulans no. 8. The production of the recombinant CGTase, as active form, was very low (about 1 U/mL) in shake flasks at 37 degrees C. This production reached 22 U/mL after 22 hours of induction by mainly shifting the postinduction temperature from 37 to 19 degrees C and using 2TY instead of LB medium. High enzyme production (35 U/mL) was attained after 18 hours of induction in fermentor using the same culture conditions as in shake flask. The recombinant enzyme showed V(max) and K(m) values of 253 +/- 36 mumol of beta-cyclodextrin/mg/min and 0.36 +/- 0.18 g/L, respectively.

Enhancement of the alcoholytic activity of alpha-amylase AmyA from Thermotoga maritima MSB8 (DSM 3109) by site-directed mutagenesis

AmyA, an alpha-amylase from the hyperthermophilic bacterium Thermotoga maritima, is able to hydrolyze internal alpha-1,4-glycosidic bonds in various alpha-glucans at 85 degrees C as the optimal temperature. Like other glycoside hydrolases, AmyA also catalyzes transglycosylation reactions, particularly when oligosaccharides are used as substrates. It was found that when methanol or butanol was used as the nucleophile instead of water, AmyA was able to catalyze alcoholysis reactions. This capability has been evaluated in the past for some alpha-amylases, with the finding that only the saccharifying fungal amylases from Aspergillus niger and from Aspergillus oryzae present measurable alcoholysis activity (R. I. Santamaria, G. Del Rio, G. Saab, M. E. Rodriguez, X. Soberon, and A. Lopez, FEBS Lett. 452:346-350, 1999). In the present work, we found that AmyA generates larger quantities of alkyl glycosides than any amylase reported so far. In order to increase the alcoholytic activity observed in AmyA, several residues were identified and mutated based on previous analogous positions in amylases, defining the polarity and geometry of the active site. Replacement of residue His222 by glutamine generated an increase in the alkyl glucoside yield as a consequence of a higher alcoholysis/hydrolysis ratio. The same change in specificity was observed for the mutants H222E and H222D, but instability of these mutants toward alcohols decreased the yield of alkyl glucoside.

Biochemical characterization of engineered amylopullulanase from Thermoanaerobacter ethanolicus 39E-implicating the non-necessity of its 100 C-terminal amino acid residues

The functional and structural significance of the C-terminal region of Thermoanaerobacter ethanolicus 39E amylopullulanase (TetApu) was explored using C-terminal truncation mutagenesis. Comparative studies between the engineered full-length (TetApuM955) and its truncated mutant (TetApuR855) included initial rate kinetics, fluorescence and CD spectrometric properties, substrate-binding and hydrolysis abilities, thermostability, and thermodenaturation kinetics. Kinetic analyses revealed that the overall catalytic efficiency, k (cat)/K (m), was slightly decreased for the truncated enzymes toward the soluble starch or pullulan substrate. Changes to the substrate affinity, K (m), and turnover rate, k (cat), varied in different directions for both types of substrates between TetApuM955 and TetApuR855. TetApuR855 exhibited a higher thermostability than TetApuM955, and retained similar substrate-binding ability and hydrolyzing efficiency against the raw starch substrate as TetApuM955 did. Fluorescence spectroscopy indicated that TetApuR855 retained an active folding conformation similar to TetApuM955. A CD-melting unfolding study was able to distinguish between TetApuM955 and TetApuR855 by the higher apparent transition temperature in TetApuR855. These results indicate that up to 100 amino acid residues, including most of the C-terminal fibronectin typeIII (FnIII) motif of TetApuM955, could be further removed without causing a seriously aberrant change in structure and a dramatic decrease in soluble starch and pullulan hydrolysis.

Phylogenetic and biochemical characterization of a novel cluster of intracellular fungal alpha-amylase enzymes

Currently known fungal alpha-amylases are well-characterized extracellular enzymes that are classified into glycoside hydrolase subfamily GH13_1. This study describes the identification, and phylogenetic and biochemical analysis of novel intracellular fungal alpha-amylases. The phylogenetic analysis shows that they cluster in the recently identified subfamily GH13_5 and display very low similarity to fungal alpha-amylases of family GH13_1. Homologues of these intracellular enzymes are present in the genome sequences of all filamentous fungi studied, including ascomycetes and basidiomycetes. One of the enzymes belonging to this new group, Amy1p from Histoplasma capsulatum, has recently been functionally linked to the formation of cell wall alpha-glucan. To study the biochemical characteristics of this novel cluster of alpha-amylases, we overexpressed and purified a homologue from Aspergillus niger, AmyD, and studied its activity product profile with starch and related substrates. AmyD has a relatively low hydrolysing activity on starch (2.2 U mg(-1)), producing mainly maltotriose. A possible function of these enzymes in relation to cell wall alpha-glucan synthesis is discussed.

Some distinguishable properties between acid-stable and neutral types of alpha-amylases from acid-producing koji

The highly humid climate of Japan facilitates the growth of various molds. Among these molds, Aspergillus oryzae is the most important and popular in Japan, and has been used as yellow-koji in producing many traditional fermented beverages and foods, such as Japanese sake, and soy sauce. Taka-amylase A (TAA), a major enzyme produced by the mold, is well known worldwide to be a leading enzyme for industrial utilization and academic study, since many extensive studies have been carried out with TAA. In southern Kyushu, the other koji's of citric acid-producing molds have often been used, such as in the production of a traditional distilled liquor of shochu. The koji molds black-koji and white-koji produce two types of alpha-amylase, namely, acid-stable (AA) and common neutral (NA). The latter enzyme is enzymatically and genetically similar to TAA. In this review, we investigate AA from three molds, Aspergillus niger, A. kawachii and A. awamori, and the yeast Cryptococcus sp. regarding the distinguishable properties between AA and NA. (i) The N-terminus amino acid sequences of AA determined by molecular cloning started with the sequence of L-S-A-, whereas those of NA started with A-T-P-. (ii) Most of the full sequences of AA were composed of, besides a core catalytic domain, an extra domain of a hinge region and a carbohydrate binding domain, which could be responsible for raw-starch-digestibility. The AA from A. niger has no exceptionally extra domain, similarly to NA. (iii) Simple methods for distinguishing AA from NA using CNP-alpha-G3 and G5 as substrates were developed by our group. (iv) The number of subsite in AA on the basis of its cleavage pattern of maltooligosaccharides was estimated to be five, which differs from that of TAA, 7-9. AA has many advantages in industrial applications, such as its acid-stability, thermostability, and raw-starch digesting properties.

Novel members of glycoside hydrolase family 13 derived from environmental DNA

Starch and pullulan-modifying enzymes of the alpha-amylase family (glycoside hydrolase family 13) have several industrial applications. To date, most of these enzymes have been derived from isolated organisms. To increase the number of members of this enzyme family, in particular of the thermophilic representatives, we have applied a consensus primer-based approach using DNA from enrichments from geothermal habitats. With this approach, we succeeded in isolating three new enzymes: a neopullulanase and two cyclodextrinases. Both cyclodextrinases displayed significant maltogenic amylase side activity, while one showed significant neopullulanase side activity. Specific motifs and domains that correlated with enzymatic activities were identified; e.g., the presence of the N domain was correlated with cyclodextrinase activity. The enzymes exhibited stability under thermophilic conditions and showed features appropriate for biotechnological applications.

Conversion of a Cyclodextrin Glucanotransferase into an α-Amylase: Assessment of Directed Evolution Strategies

Glycoside hydrolase family 13 (GH13) members have evolved to possess various distinct reaction specificities despite the overall structural similarity. In this study we investigated the evolutionary input required to effeciently interchange these specificities and also compared the effectiveness of laboratory evolution techniques applied, i.e., error-prone PCR and saturation mutagenesis. Conversion of our model enzyme, cyclodextrin glucanotransferase (CGTase), into an alpha-amylase like hydrolytic enzyme by saturation mutagenesis close to the catalytic core yielded a triple mutant (A231V/F260W/F184Q) with the highest hydrolytic rate ever recorded for a CGTase, similar to that of a highly active alpha-amylase, while cyclodextrin production was virtually abolished. Screening of a much larger, error-prone PCR generated library yielded far less effective mutants. Our results demonstrate that it requires only three mutations to change CGTase reaction specificity into that of another GH13 enzyme. This suggests that GH13 members may have diversified by introduction of a limited number of mutations to the common ancestor, and that interconversion of reaction specificites may prove easier than previously thought.

Differential chain-length specificities of two isoamylase-type starch-debranching enzymes from developing seeds of kidney bean

Plant isoamylase-type starch-debranching enzymes (ISAs) hydrolyze alpha-1,6-linkages in alpha-1,4/alpha-1,6-linked polyglucans. Two ISAs, designated PvISA1/2 and PvISA3, were purified from developing seeds of kidney bean by ammonium sulfate fractionation and several column chromatographic procedures. The enzymes displayed different substrate specificities for polyglucans: PvISA1/2 showed broad chain-length specificities, whereas PvISA3 liberated specific chains with a DP of 2 to 4.

Two novel, putatively cell wall-associated and glycosylphosphatidylinositol-anchored alpha-glucanotransferase enzymes of Aspergillus niger

In the genome sequence of Aspergillus niger CBS 513.88, three genes were identified with high similarity to fungal alpha-amylases. The protein sequences derived from these genes were different in two ways from all described fungal alpha-amylases: they were predicted to be glycosylphosphatidylinositol anchored, and some highly conserved amino acids of enzymes in the alpha-amylase family were absent. We expressed two of these enzymes in a suitable A. niger strain and characterized the purified proteins. Both enzymes showed transglycosylation activity on donor substrates with alpha-(1,4)-glycosidic bonds and at least five anhydroglucose units. The enzymes, designated AgtA and AgtB, produced new alpha-(1,4)-glycosidic bonds and therefore belong to the group of the 4-alpha-glucanotransferases (EC 2.4.1.25). Their reaction products reached a degree of polymerization of at least 30. Maltose and larger maltooligosaccharides were the most efficient acceptor substrates, although AgtA also used small nigerooligosaccharides containing alpha-(1,3)-glycosidic bonds as acceptor substrate. An agtA knockout of A. niger showed an increased susceptibility towards the cell wall-disrupting compound calcofluor white, indicating a cell wall integrity defect in this strain. Homologues of AgtA and AgtB are present in other fungal species with alpha-glucans in their cell walls, but not in yeast species lacking cell wall alpha-glucan. Possible roles for these enzymes in the synthesis and/or maintenance of the fungal cell wall are discussed.

Cloning and Expression of Cyclodextrin Glycosyltransferase Gene from Paenibacillus sp. T16 Isolated from Hot Spring Soil in Northern Thailand

Gene encoding cyclodextrin glycosyltransferase (CGTase), from thermotolerant Paenibacillus sp. T16 isolated from hot spring area in northern Thailand, was cloned and expressed in E. coli (JM109). The nucleotide sequences of both wild type and transformed CGTases consisted of 2139 bp open reading frame, 713 deduced amino acids residues with difference of 4 amino acid residues. The recombinant cells required 24 h culture time and a neutral pH for culture medium to produce compatible amount of CGTase compared to 72 h culture time and pH 10 for wild type. The recombinant and wild-type CGTases were purified by starch adsorption and phenyl sepharose column chromatography and characterized in parallel. Both enzymes showed molecular weight of 77 kDa and similar optimum pHs and temperatures with recombinant enzyme showing broader range. There were some significant difference in pH, temperature stability and kinetic parameters. The presence of high starch concentration resulted in higher thermostability in recombinant enzyme than the wild type. The recombinant enzyme was more stable at higher temperature and lower pH, with lower K(m) for coupling reaction using cellobiose and cyclodextrins as substrates.

The N-terminal region of the starch-branching enzyme from Phaseolus vulgaris L. is essential for optimal catalysis and structural stability

Starch-branching enzymes (SBEs) play a pivotal role in determining the fine structure of starch by catalyzing the syntheses of alpha-1,6-branch points. They are the members of the alpha-amylase family and have four conserved regions in a central (beta/alpha)8 barrel, including the catalytic sites. Although the role of the catalytic barrel domain of an SBE is known, that of its N- and C-terminal regions remain unclear. We have previously shown that the C-terminal regions of the two SBE isozymes (designated as PvSBE1 and PvSBE2) from kidney bean (Phaseolus vulgaris L.) have different roles in branching enzyme activity. To understand the contribution of the N-terminal region to catalysis, six chimeric enzymes were constructed between PvSBE1 and PvSBE2. Only one enzyme (1Na/2Nb)-II, in which a portion of the N-terminal region of PvSBE2 was substituted by the corresponding region of PvSBE1, retained 6% of the PvSBE2 activity. The N-terminal truncated form (DeltaN46-PvSBE2), lacking 46 N-terminal residues of PvSBE2, lost enzyme activity and stability to proteolysis. To investigate the possible function of this region, three residues (Asp-15, His-24, and Arg-28) among these 46 residues were subjected to site-directed mutagenesis. The purified mutant enzymes showed nearly the same K(m) values as PvSBE2 but had lower V(max) values and heat stabilities than PvSBE2. These results suggest that the N-terminal region of the kidney bean SBE is essential for maximum enzyme activity and thermostability.

Val326 of Thermoactinomyces vulgaris R-47 amylase II modulates the preference for alpha-(1,4)- and alpha-(1,6)-glycosidic linkages

Thermoactinomyces vulgaris R-47 alpha-amylase II (TVA II) catalyzes not only the hydrolysis of alpha-(1,4)- and alpha-(1,6)-glycosidic linkages but also transglycosylation. The subsite +1 structure of alpha-amylase family enzymes plays important roles in substrate specificity and transglycosylation activity. We focused on the amino acid residue at the 326th position based on information on the primary structure and crystal structure, and replaced Val with Ala, Ile, or Thr. The V326A mutant favored hydrolysis of the alpha-(1,4)-glycosidic linkage compared to the wild-type enzyme. In contrast, the V326I mutant favored hydrolysis of the alpha-(1,6)-glycosidic linkage and exhibited low transglycosylation activity. In the case of the V326T mutant, the hydrolytic activity was almost identical to that of the wild-type TVA II, and the transglycosylation activity was poor. These results suggest that the volume and the hydrophobicity of the amino acid residue at the 326th position modulate both the preference for glycosidic linkages and the transglycosylation activity.

Identification of catalytic amino acids of cyclodextran glucanotransferase from Bacillus circulans T-3040

In glycoside hydrolase family 66 (see http://afmb.cnrs-mrs.fr/CAZY/), cyclodextran glucanotransferase (CITase) is the only transglycosylation enzyme, all the other family 66 enzymes being dextranases. To analyze the catalytic amino acids of CITase, we modified CITase chemically from the T-3040 strain of Bacillus circulans with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). EDC inactivated the enzyme by following pseudo-first order kinetics. In addition, the substrates of an isomaltooligosaccharide and a cyclodextran inhibited EDC-induced enzyme inactivation, implicating the carboxyl groups of CITase as the catalytic amino acids of the enzyme. When two conserved aspartic acid residues, Asp145 and Asp270, were replaced with Asn in T-3040 mature CITase, CIT-D270N was completely inactive, and CIT-D145N had reduced activity. The V(max) of CIT-D145N was 1% of that of wild-type CITase, whereas the K(m) of CIT-D145N was about the same as that of the wild-type enzyme. These findings indicate that Asp145 and Asp270 play an important role in the enzymatic reaction of T-3040 CITase.

Comparison of the wild-type alpha-amylase and its variant enzymes in Bacillus amyloliquefaciens in activity and thermal stability, and insights into engineering the thermal stability of bacillus alpha-amylase

The starch hydrolysis activity and thermal stability of Bacillus amyloliquefaciens alpha-amylase (wild-type enzyme or WT) and its variant enzymes, designated as M77, M111, and 21B, were compared. All have an optimal pH at around 6, as well as almost the same reaction rates and Km and kcat values. The optimal temperature in the absence of Ca2+ ions is 60 degrees C for WT and M77 and 40 degrees C for M111 and 21B. Those of M111 and 21B rose to 50-60 degrees C upon the addition of 5 mM CaCl2, while those of WT and M77 did not change. The dissociation constants Kd for Ca2+ to WT and M77 are much lower than those of M111 and 21B. Asp233 in WT is replaced by Asn in M111 and 21B, while it is retained in M77, suggesting that Asp233 is involved in the thermal stability of the enzyme through Ca2+ ion binding. These findings provide insight into engineering the thermal stability of B. amyloliquefaciens alpha-amylase, which would be useful for its applications in the baking industry and in glucose manufacturing.

Contribution of W229 to the transglycosylation activity of 4-α-glucanotransferase from Pyrococcus furiosus

A W229H mutant of 4-alpha-glucanotransferase (4-alpha-GTase) from Pyrococcus furiosus was constructed and its catalytic properties were studied to investigate the role of W229 in the catalytic specificities of the enzyme. Various activities and kinetic parameters were determined for the wild-type and W229H mutant enzymes. The transglycosylation factor and transglycosylation activity of the mutant enzyme markedly decreased, but its hydrolysis activity was scarcely affected. It was discovered that the k(cat)/K(m) value of transglycosylation activity significantly decreased to about 15% of that of the wild type, while k(cat)/K(m) value of hydrolysis activity changed little for the mutant enzyme. The hydrophobicity of W229 was thought to be critical to the transglycosylation activity of the enzyme based on the enzyme's modeled tertiary structures.

A novel branching enzyme of the GH-57 family in the hyperthermophilic archaeon Thermococcus kodakaraensis KOD1

Branching enzyme (BE) catalyzes formation of the branch points in glycogen and amylopectin by cleavage of the alpha-1,4 linkage and its subsequent transfer to the alpha-1,6 position. We have identified a novel BE encoded by an uncharacterized open reading frame (TK1436) of the hyperthermophilic archaeon Thermococcus kodakaraensis KOD1. TK1436 encodes a conserved protein showing similarity to members of glycoside hydrolase family 57 (GH-57 family). At the C terminus of the TK1436 protein, two copies of a helix-hairpin-helix (HhH) motif were found. TK1436 orthologs are distributed in archaea of the order Thermococcales, cyanobacteria, some actinobacteria, and a few other bacterial species. When recombinant TK1436 protein was incubated with amylose used as the substrate, a product peak was detected by high-performance anion-exchange chromatography, eluting more slowly than the substrate. Isoamylase treatment of the reaction mixture significantly increased the level of short-chain alpha-glucans, indicating that the reaction product contained many alpha-1,6 branching points. The TK1436 protein showed an optimal pH of 7.0, an optimal temperature of 70 degrees C, and thermostability up to 90 degrees C, as determined by the iodine-staining assay. These properties were the same when a protein devoid of HhH motifs (the TK1436DeltaH protein) was used. The average molecular weight of branched glucan after reaction with the TK1436DeltaH protein was over 100 times larger than that of the starting substrate. These results clearly indicate that TK1436 encodes a structurally novel BE belonging to the GH-57 family. Identification of an overlooked BE species provides new insights into glycogen biosynthesis in microorganisms.

Monoclinic crystal form of Aspergillus niger alpha-amylase in complex with maltose at 1.8 angstroms resolution

Aspergillus niger alpha-amylase catalyses the hydrolysis of alpha-1,4-glucosidic bonds in starch. It shows 100% sequence identity to the A. oryzae homologue (also called TAKA-amylase), three crystal structures of which have been published to date. Two of them belong to the orthorhombic space group P2(1)2(1)2(1) with one molecule per asymmetric unit and one belongs to the monoclinic space group P2(1) with three molecules per asymmetric unit. Here, the purification, crystallization and structure determination of A. niger alpha-amylase crystallized in the monoclinic space group P2(1) with two molecules per asymmetric unit in complex with maltose at 1.8 angstroms resolution is reported. Furthermore, a novel 1.6 angstroms resolution orthorhombic crystal form (space group P2(1)2(1)2) of the native enzyme is presented. Four maltose molecules are observed in the maltose-alpha-amylase complex. Three of these occupy active-site subsites -2 and -1, +1 and +2 and the hitherto unobserved subsites +4 (Asp233, Gly234) and +5 (Asp235). The fourth maltose molecule binds at the distant binding sites d1 (Tyr382) and d2 (Trp385), also previously unobserved. Furthermore, it is shown that the active-site groove permits different binding modes of sugar units at subsites +1 and +2. This flexibility of the active-site cleft close to the catalytic centre might be needed for a productive binding of substrate chains and/or release of products.

Comparison of Starch Hydrolysis Activity and Thermal Stability of Two Bacillus licheniformis α-Amylases and Insights into Engineering α-Amylase Variants Active under Acidic Conditions

Bacillus licheniformis alpha-amylase (BLA) is widely used in various procedures of starch degradation in the food industry, and a BLA species with improved activity at higher temperature and under acidic conditions is desirable. Two BLA species, designated as PA and MA, have been isolated from the wild-type B. licheniformis strain and a mutant strain, respectively. In this study, their starch-hydrolysis activity and thermal stability were examined. MA showed higher activity than PA, especially at acidic pH (pH 5.0-5.5), and even after 1 h of treatment at 90 degrees C. MA was active in the range of pH 4.0-8.0, which is much wider than that (pH 4.5-7.5) of PA. It was shown that the proton dissociation constants on the acidic and alkaline sides (pKa1 and pKa2) were shifted to more acidic and basic values, respectively, by the mutation of PA to MA. The activation energy and thermodynamic parameters for their thermal inactivation indicate that MA is more thermally stable and catalytically active than PA, suggesting that MA could be useful for glucose-production process coupled with reactions catalyzed by beta-amylase.

Identification of Glutamate Residues Important for Catalytic Activity or Thermostability of a Truncated Bacillus sp. Strain TS-23 α-amylase by Site-directed Mutagenesis

The importance of 17 glutamate residues of a truncated Bacillus sp. strain TS-23 alpha-amylase (BACdeltaNC) was investigated by site-directed mutagenesis. The Ala- and Asp-substituted variants were overexpressed in the recombinant E. coli cells and the 54-kDa proteins were purified to nearly homologous by nickel-chelate chromatography. Glu-295, which locates in the conserved region III of amylolytic enzymes, mutations resulted in a complete loss of enzyme activity. The specific activity for E151A was decreased by more than 30%, while other variants showed activity comparable to that of BACdeltaNC. A decreased half-life at 70 degrees C was observed for Glu-219 variants with respective to the wild-type enzyme, suggesting that replacement of Glu-219 by either Ala or Asp might have a significant destabilizing effect on the protein structure.

Crystal structure of pullulanase: evidence for parallel binding of oligosaccharides in the active site

The crystal structures of Klebsiella pneumoniae pullulanase and its complex with glucose (G1), maltose (G2), isomaltose (isoG2), maltotriose (G3), or maltotetraose (G4), have been refined at around 1.7-1.9A resolution by using a synchrotron radiation source at SPring-8. The refined models contained 920-1052 amino acid residues, 942-1212 water molecules, four or five calcium ions, and the bound sugar moieties. The enzyme is composed of five domains (N1, N2, N3, A, and C). The N1 domain was clearly visible only in the structure of the complex with G3 or G4. The N1 and N2 domains are characteristic of pullulanase, while the N3, A, and C domains have weak similarity with those of Pseudomonas isoamylase. The N1 domain was found to be a new type of carbohydrate-binding domain with one calcium site (CBM41). One G1 bound at subsite -2, while two G2 bound at -1 approximately -2 and +2 approximately +1, two G3, -1 approximately -3 and +2 approximately 0', and two G4, -1 approximately -4 and +2 approximately -1'. The two bound G3 and G4 molecules in the active cleft are almost parallel and interact with each other. The subsites -1 approximately -4 and +1 approximately +2, including catalytic residues Glu706 and Asp677, are conserved between pullulanase and alpha-amylase, indicating that pullulanase strongly recognizes branched point and branched sugar residues, while subsites 0' and -1', which recognize the non-reducing end of main-chain alpha-1,4 glucan, are specific to pullulanase and isoamylase. The comparison suggested that the conformational difference around the active cleft, together with the domain organization, determines the different substrate specificities between pullulanase and isoamylase.

Microbial enzymes involved in carbon dioxide fixation

This review focuses on the enzymes involved in two microbial carbon dioxide fixation pathways, the Calvin-Benson-Bassham cycle and the reductive tricarboxylic acid cycle. The function, structural features, and gene regulation of microbial ribulose 1,5-bisphosphate carboxylase/oxygenase (Rubisco), a key enzyme of the Calvin-Benson-Bassham cycle, is described. Some recent findings on Rubisco from archaea and Rubisco-like proteins are also outlined. In the final section, biochemical features of the key enzymes in the reductive tricarboxylic acid cycle are reviewed.

Alteration of product specificity of cyclodextrin glucanotransferase from Thermococcus sp. B1001 by site-directed mutagenesis

Cyclodextrin glucanotransferase (CGTase) from the hyperthermophilic archaeon Thermococcus sp. B1001 catalyzed the production predominantly of alpha-cyclodextrin (CD) from starch (Tachibana, Y. et al., Appl. Environ. Microbiol., 65, 1991-1997, 1999). The CGTase gene (cgtA) from this strain was cloned and sequenced. It was composed of 2217 nucleotides, and encoded a protein (739 amino acids) with a molecular mass of 83,240 Da. Recombinant CgtA expressed in Escherichia coli also catalyzed the production predominantly of alpha-CD from starch, as did native CgtA from strain B1001. Based on a substrate binding model of Bacillus circulans no. 8 CGTase, Tyr100, Trp191 and Tyr267 were specified to locate the spiral amylose and to minimize the size of the CD by saccharide aromatics interaction. In order to determine the critical residue for catalyzing production predominantly of alpha-CD, site-directed mutations were introduced in CgtA (Y100W, Tyr100-->Trp; W191Y, Trp191-->Tyr; W191F, Trp191-->Phe; Y267W, Tyr267-->Trp; Y267F, Tyr267-->Phe). Analysis of the reaction products by HPLC revealed that the mutant enzyme Y267W produced more beta- and gamma-CD than the wild-type enzyme. However, the other mutants still produced high levels of alpha-CD, suggesting that Tyr267 plays a critical role in alpha-CD production catalyzed by B1001 CGTase.

Two novel cyclodextrin-degrading enzymes isolated from thermophilic bacteria have similar domain structures but differ in oligomeric state and activity profile

In this paper, we present the expression and characterization of two novel enzymes from the alpha-amylase family exhibiting cyclomaltodextrinase specificity. The nucleotide sequences encoding the enzymes were isolated from the genomic DNA of two thermophilic bacterial strains originating from Icelandic hot springs and belonging to the genera Anoxybacillus (AfCda13) and Laceyella (LsCda13). The genes were amplified using a consensus primer strategy utilizing two of the four conserved regions present in glycoside hydrolase family 13. No identifiable signal peptides were present in open reading frames encoding the enzymes, indicating an intracellular location of both enzymes, and their physiological function to be intracellular cyclodextrin degradation. The domain structures of both enzymes were also similar, including an N-terminal domain, the catalytic module composed of the A- and B-domains, and a C-terminal domain. Despite the similarity in domain composition, the two enzymes displayed differences in the oligomeric state with AfCda13 being a dimeric protein, whereas LsCda13 was monomeric. The two enzymes also displayed significantly different activity profiles, despite being active on the same range of substrates. It was shown that the enzyme displaying the highest activity on cyclodextrin was dimeric (AfCda13). Moreover, a fraction of the dimeric enzyme could be converted to a monomeric state in the presence of KCl and this fraction retained only 23% of its activity on alpha-cyclodextrin while its activity on starch was not significantly affected, indicating that the oligomeric state is an important factor for a high activity on cyclodextrin substrates.

GH97 is a new family of glycoside hydrolases, which is related to the alpha-galactosidase superfamily

Background

As a rule, about 1% of genes in a given genome encode glycoside hydrolases and their homologues. On the basis of sequence similarity they have been grouped into more than ninety GH families during the last 15 years. The GH97 family has been established very recently and initially included only 18 bacterial proteins. However, the evolutionary relationship of the genes encoding proteins of this family remains unclear, as well as their distribution among main groups of the living organisms.

Results

The extensive search of the current databases allowed us to double the number of GH97 family proteins. Five subfamilies were distinguished on the basis of pairwise sequence comparison and phylogenetic analysis. Iterative sequence analysis revealed the relationship of the GH97 family with the GH27, GH31, and GH36 families of glycosidases, which belong to the α-galactosidase superfamily, as well as a more distant relationship with some other glycosidase families (GH13 and GH20).

Conclusion

The results of this study show an unexpected sequence similarity of GH97 family proteins with glycoside hydrolases from several other families, that have (β/α)₈-barrel fold of the catalytic domain and a retaining mechanism of the glycoside bond hydrolysis. These data suggest a common evolutionary origin of glycosidases representing different families and clans.

Crystallization and preliminary X-ray crystallographic study of disproportionating enzyme from potato

Disproportionating enzyme (D-enzyme; EC 2.4.1.25) is a 59 kDa protein that belongs to the alpha-amylase family. D-enzyme catalyses intramolecular and intermolecular transglycosylation reactions of alpha-1,4 glucan. A crystal of the D-enzyme from potato was obtained by the hanging-drop vapour-diffusion method. Preliminary X-ray data showed that the crystal diffracts to 2.0 A resolution and belongs to space group C222(1), with unit-cell parameters a = 69.7, b = 120.3, c = 174.2 A.

Insights into the reaction mechanism of glycosyl hydrolase family 49. Site-directed mutagenesis and substrate preference of isopullulanase

Aspergillus niger isopullulanase (IPU) is the only pullulan-hydrolase in glycosyl hydrolase (GH) family 49 and does not hydrolyse dextran at all, while all other GH family 49 enzymes are dextran-hydrolysing enzymes. To investigate the common catalytic mechanism of GH family 49 enzymes, nine mutants were prepared to replace residues conserved among GH family 49 (four Trp, three Asp and two Glu). Homology modelling of IPU was also carried out based on the structure of Penicillium minioluteum dextranase, and the result showed that Asp353, Glu356, Asp372, Asp373 and Trp402, whose substitutions resulted in the reduction of activity for both pullulan and panose, were predicted to be located in the negatively numbered subsites. Three Asp-mutated enzymes, D353N, D372N and D373N, lost their activities, indicating that these residues are candidates for the catalytic residues of IPU. The W402F enzyme significantly reduced IPU activity, and the Km value was sixfold higher and the k0 value was 500-fold lower than those for the wild-type enzyme, suggesting that Trp402 is a residue participating in subsite -1. Trp31 and Glu273, whose substitutions caused a decrease in the activity for pullulan but not for panose, were predicted to be located in the interface between N-terminal and beta-helical domains. The substrate preference of the negatively numbered subsites of IPU resembles that of GH family 49 dextranases. These findings suggest that IPU and the GH family 49 dextranases have a similar catalytic mechanism in their negatively numbered subsites in spite of the difference of their substrate specificities.

Pullulan degrading enzymes of bacterial origin

Pullulan degrading enzymes belong to a group of glycosylhydrolases that are widely distributed in nature and are produced by an extremely wide variety of species. Among them the thermophilic and mesophilic bacteria are a rich source of these enzymes. There are many biotechnological applications for these enzymes and a rapidly growing amount of information about their diversity, genetic as well as biochemical and biophysical characteristics. The properties of these enzymes vary and are somewhat linked to the natural environment inhabited by the producing organisms. Genes for these enzymes have been cloned from several strains and their amino acid sequences show highly conserved regions common to the enzymes of the amylase family. Molecular studies have greatly extended our knowledge on pullulan degrading enzymes and their biosynthesis. However, enzyme production levels have usually not been as high as had been assumed possible, and the properties of some enzymes are less than optimal for their industrial applications. Some of these problems can be overcome with the use of good producer organisms, optimized expression/secretion vectors, and site-directed mutagenesis. The molecular biology of pullulan degrading enzymes has been and continues to be a valuable system for studying basic questions of cell biology, such as mechanisms of gene regulation and secretion, and the structure-function relationships of proteins.

Improved thermostability of bacillus circulans cyclodextrin glycosyltransferase by the introduction of a salt bridge

Cyclodextrin glycosyltransferase (CGTase) catalyzes the formation of cyclodextrins from starch. Among the CGTases with known three-dimensional structure, Thermoanaerobacterium thermosulfurigenes CGTase has the highest thermostability. By replacing amino acid residues in the B-domain of Bacillus circulans CGTase with those from T. thermosulfurigenes CGTase, we identified a B. circulans CGTase mutant (with N188D and K192R mutations), with a strongly increased activity half-life at 60 degrees C. Asp188 and Arg192 form a salt bridge in T. thermosulfurigenes CGTase. Structural analysis of the B. circulans CGTase mutant revealed that this salt bridge is also formed in the mutant. Thus, the activity half-life of this enzyme can be enhanced by rational protein engineering.

Conversion of cyclodextrin glycosyltransferase into a starch hydrolase by directed evolution: the role of alanine 230 in acceptor subsite +1

Cyclodextrin glycosyltransferase (CGTase) preferably catalyzes transglycosylation reactions, whereas many other alpha-amylase family enzymes are hydrolases. Despite the availability of three-dimensional structures of several transglycosylases and hydrolases of this family, the factors that determine the hydrolysis and transglycosylation specificity are far from understood. To identify the amino acid residues that are critical for the transglycosylation reaction specificity, we carried out error-prone PCR mutagenesis and screened for Bacillus circulans strain 251 CGTase mutants with increased hydrolytic activity. After three rounds of mutagenesis the hydrolytic activity had increased 90-fold, reaching the highest hydrolytic activity ever reported for a CGTase. The single mutation with the largest effect (A230V) occurred in a residue not studied before. The structure of this A230V mutant suggests that the larger valine side chain hinders substrate binding at acceptor subsite +1, although not to the extent that catalysis is impossible. The much higher hydrolytic than transglycosylation activity of this mutant indicates that the use of sugar acceptors is hindered especially. This observation is in favor of a proposed induced-fit mechanism, in which sugar acceptor binding at acceptor subsite +1 activates the enzyme in transglycosylation [Uitdehaag et al. (2000) Biochemistry 39, 7772-7780]. As the A230V mutation introduces steric hindrance at subsite +1, this mutation is expected to negatively affect the use of sugar acceptors. Thus, the characteristics of mutant A230V strongly support the existence of the proposed induced-fit mechanism in which sugar acceptor binding activates CGTase in a transglycosylation reaction.

Bacillus stearothermophilus neopullulanase selective hydrolysis of amylose to maltose in the presence of amylopectin

The specificity of Bacillus stearothermophilus TRS40 neopullulanase toward amylose and amylopectin was analyzed. Although this neopullulanase completely hydrolyzed amylose to produce maltose as the main product, it scarcely hydrolyzed amylopectin. The molecular mass of amylopectin was decreased by only one order of magnitude, from approximately 10(8) to 10(7) Da. Furthermore, this neopullulanase selectively hydrolyzed amylose when starch was used as a substrate. This phenomenon, efficient hydrolysis of amylose but not amylopectin, was also observed with cyclomaltodextrinase from alkaliphilic Bacillus sp. strain A2-5a and maltogenic amylase from Bacillus licheniformis ATCC 27811. These three enzymes hydrolyzed cyclomaltodextrins and amylose much faster than pullulan. Other amylolytic enzymes, such as bacterial saccharifying alpha-amylase, bacterial liquefying alpha-amylase, beta-amylase, and neopullulanase from Bacillus megaterium, did not exhibit this distinct substrate specificity at all, i.e., the preference of amylose to amylopectin.

Properties and applications of starch-converting enzymes of the alpha-amylase family

Starch is a major storage product of many economically important crops such as wheat, rice, maize, tapioca, and potato. A large-scale starch processing industry has emerged in the last century. In the past decades, we have seen a shift from the acid hydrolysis of starch to the use of starch-converting enzymes in the production of maltodextrin, modified starches, or glucose and fructose syrups. Currently, these enzymes comprise about 30% of the world's enzyme production. Besides the use in starch hydrolysis, starch-converting enzymes are also used in a number of other industrial applications, such as laundry and porcelain detergents or as anti-staling agents in baking. A number of these starch-converting enzymes belong to a single family: the alpha-amylase family or family13 glycosyl hydrolases. This group of enzymes share a number of common characteristics such as a (beta/alpha)(8) barrel structure, the hydrolysis or formation of glycosidic bonds in the alpha conformation, and a number of conserved amino acid residues in the active site. As many as 21 different reaction and product specificities are found in this family. Currently, 25 three-dimensional (3D) structures of a few members of the alpha-amylase family have been determined using protein crystallization and X-ray crystallography. These data in combination with site-directed mutagenesis studies have helped to better understand the interactions between the substrate or product molecule and the different amino acids found in and around the active site. This review illustrates the reaction and product diversity found within the alpha-amylase family, the mechanistic principles deduced from structure-function relationship structures, and the use of the enzymes of this family in industrial applications.