Efficient Luminescence from Perovskite Quantum Dot Solids

Self-Assembled High Quality CsPbBr3 Quantum Dot Films toward Highly Efficient Light-Emitting Diodes

Full inorganic cesium lead halide perovskites (IOPs) are regarded as attractive candidates for light-emitting diodes (LEDs) by their excellent luminescent conversion. However, unsatisfactory efficiency and stability are still the main drawbacks that hinder the commercialization progress of perovskite LEDs (PeLEDs). Here, we report an extremely uniform and flat CsPbBr₃ film composing of self-assembly core-shell structured quantum dots (SCQDs) based on one-step precursor coating. The QDs size in the CsPbBr₃ film is around 4.5 nm (smaller than the Bohr radius), which significantly confines injected carriers and leads to a ultrahigh exciton binding energy ( E_b) of 198 meV. In addition, unfavorable surfacial defects are dramatically passivated by a thin surfacial-capping layer composed of long-chain ammonium groups (phenylalanine bromide, PPABr), resulting in an ultralow nonradiative recombination rate. Consequently, the CsPbBr₃ SCQDs film presents a high photoluminescence quantum yield (PLQY) of 85%. It enables the resulting green PeLEDs to deliver a recorded external quantum efficiency (EQE) over 15% with ideal operational stability. Furthermore, the developed CsPbBr₃ SCQDs film also demonstrates promising potential in multifunctional lighting sources such as flexible and smart devices.

Halide exchange and surface modification of metal halide perovskite nanocrystals with alkyltrichlorosilanes

Metal halide perovskite nanocrystals have recently emerged as promising materials for light emitting displays and lasing applications due to their narrow emission wavelengths, high photoluminescence quantum yields, and readily adjustable emission wavelengths. For these metal halide perovskite nanocrystals to be useful in commercial applications, their stability must be increased and the photoluminescence quantum yields of the iodide (red emitting) and chloride (blue emitting) containing derivatives must also be increased. The photoluminescence quantum yields of blue emitting CsPbCl3 nanoparticles lag behind those of green emitting CsPbBr3 nanoparticles, with maximum photoluminescence quantum yields of 1-10% previously reported for CsPbCl3 as compared to 80-100% for CsPbBr3. Herein, we show that alkyltrichlorosilanes (R-SiCl3) can be used as Cl-sources for rapid anion exchange with host CsPbBr3 nanocrystals. This anion exchange reaction is advantageous in that it can be performed at room temperature and results in highly dispersible nanoparticles coated with siloxane shells. CsPbCl3 nanoparticles produced through Cl-exchange with R-SiCl3 show significantly improved long-term stability and high photoluminescence quantum yields of up to 12%. These siloxane coated nanocrystals are even stable in the presence of water, whereas CsPbCl3 nanoparticles synthesized through other routes rapidly degrade in the presence of water.

Facile synthesis of two-dimensional Ruddlesden-Popper perovskite quantum dots with fine-tunable optical properties

In hybrid organic-inorganic and all-inorganic metal halide perovskite nanomaterials, two-dimensional (2D) Ruddlesden-Popper (RP) perovskites have become one of the most interesting materials because of tunable bandgaps varied with the layer thickness, effective modulation of the electron-hole confinement, and high stability. Here, we report a one-pot synthesis of 2D RP perovskite (BA)2(MA)n - 1PbnX3n + 1 (BA = 1-butylammonium, MA = methylammonium, X = Br or I) quantum dots (QDs) with an average size of 10 nm at room temperature. The (BA)2(MA)n - 1PbnBr3n + 1 (Br series) QDs and (BA)2(MA)n - 1PbnI3n + 1 (I series) QDs exhibited tunable emitting spectrum in the range of 410-523 nm and 527-761 nm, respectively, with full width at half maximum (FWHM) of 12-75 nm. The emission color was tuned by the ratio of MA and halide. The photoluminescence quantum yield of 2D perovskite QDs reached 48.6% with more thermodynamic stability in comparison with 3D MAPbX3 QDs. Overall results indicated that developing a solution synthesis for 2D RP perovskite QDs with great optical properties paves the way toward future optoelectronic devices and perovskite quantum dot photovoltaics.

Luminescent Nanofluids of Organometal Halide Perovskite Nanocrystals in Silicone Oils with Ultrastability

Luminescent nanofluids are successfully prepared by directly dispersing organometal halide perovskite nanocrystals (OHP NCs) with different emission colors in silicone oils. The photoluminescence quantum yields of nanofluids with green, blue and red emission are 47, 32, and 19%, respectively. Furthermore, the nanofluids greatly enhance the stability of OHP NCs and show excellent resistance against moisture, heat and ultraviolet light. The luminescent nanofluids can be used as liquid color converter for LED. By loading them onto silica aerogel, luminescent perovskite powders were achieved. Their applications as phosphor additives for preparing luminescent PMMA composites were demonstrated.

The Benefit and Challenges of Zero-Dimensional Perovskites

To break free of the limitations imposed by three-dimensional (3D) perovskites, such as their lackluster stability, researchers have opened new frontiers into lower-dimensional perovskite derivatives. Thanks to advances in solvent-based synthesis methods, zero-dimensional (0D) inorganic perovskites, mainly Cs₄PbBr₆, have recently reemerged in various forms (from single crystals to nanocrystals) as materials with properties that bridge organic molecules and inorganic semiconductors. These properties include intrinsic Pb²⁺ ion emission, large exciton binding energy, and small polaron formation upon photoexcitation, in addition to anomalous green photoluminescence with improved stability and high quantum yield. Moreover, the demonstration of Cs₄PbBr₆-based light-emitting diode (LED) devices highlights the accelerating efforts toward their applications and motivates further investigations of these emerging materials. This Perspective summarizes the progress in the field of Cs₄PbBr₆ perovskites, focusing on their molecular-electronic properties and hotly debated green photoluminescence. We conclude by presenting the implications of the unique findings and suggesting opportunities for the future development and applications of these 0D perovskites.

Organic-inorganic hybrid perovskite quantum dots with high PLQY and enhanced carrier mobility through crystallinity control by solvent engineering and solid-state ligand exchange

The photoluminescence quantum yield (PLQY) and charge carrier mobility of organic-inorganic perovskite QDs were enhanced by the optimization of crystallinity and surface passivation as well as solid-state ligand exchange. The crystallinity of perovskite QDs was determined by the Effective solvent field (Esol) of various solvents for precipitation. The solvent with high Esol could more quickly countervail the localized field generated by the polar solvent, and it causes fast crystallization of the dissolved precursor, which results in poor crystallinity. The post-ligand adding process (PLAP) and post-ligand exchange process (PLEP) increase the PLQY of perovskite QDs by reducing non-radiative recombination and the density of surface defect states through surface passivation. Particularly, the post ligand exchange process (PLEP) in the solid-state improved the charge carrier mobility of perovskite QDs in addition to the PLQY enhancement. The ligand exchange with short alkyl chain length ligands could improve the packing density of perovskite QDs in films by reducing the inter-particle distance between perovskite QDs. The maximum hole mobility of 6.2 × 10-3 cm2 V-1 s-1, one order higher than that of pristine QDs without the PLEP, is obtained at perovskite QDs with hexyl ligands. By using PLEP treatment, compared to the pristine device, a 2.5 times higher current efficiency in perovskite QD-LEDs was achieved due to the improved charge carrier mobility and PLQY.

Exploration of Near-Infrared-Emissive Colloidal Multinary Lead Halide Perovskite Nanocrystals Using an Automated Microfluidic Platform

Hybrid organic-inorganic and fully inorganic lead halide perovskite nanocrystals (NCs) have recently emerged as versatile solution-processable light-emitting and light-harvesting optoelectronic materials. A particularly difficult challenge lies in warranting the practical utility of such semiconductor NCs in the red and infrared spectral regions. In this context, all three archetypal A-site monocationic perovskites-CH₃NH₃PbI₃, CH(NH₂)₂PbI₃, and CsPbI₃-suffer from either chemical or thermodynamic instabilities in their bulk form. A promising approach toward the mitigation of these challenges lies in the formation of multinary compositions (mixed cation and mixed anion). In the case of multinary colloidal NCs, such as quinary Cs _xFA_{1- x}Pb(Br_{1- y}I _y)₃ NCs, the outcome of the synthesis is defined by a complex interplay between the bulk thermodynamics of the solid solutions, crystal surface energies, energetics, dynamics of capping ligands, and the multiple effects of the reagents in solution. Accordingly, the rational synthesis of such NCs is a formidable challenge. Herein, we show that droplet-based microfluidics can successfully tackle this problem and synthesize Cs _xFA_{1- x}PbI₃ and Cs _xFA_{1- x}Pb(Br_{1- y}I _y)₃ NCs in both a time- and cost-efficient manner. Rapid in situ photoluminescence and absorption measurements allow for thorough parametric screening, thereby permitting precise optical engineering of these NCs. In this showcase study, we fine-tune the photoluminescence maxima of such multinary NCs between 700 and 800 nm, minimize their emission line widths (to below 40 nm), and maximize their photoluminescence quantum efficiencies (up to 89%) and phase/chemical stabilities. Detailed structural analysis revealed that the Cs _xFA_{1- x}Pb(Br_{1- y}I _y)₃ NCs adopt a cubic perovskite structure of FAPbI₃, with iodide anions partially substituted by bromide ions. Most importantly, we demonstrate the excellent transference of reaction parameters from microfluidics to a conventional flask-based environment, thereby enabling up-scaling and further implementation in optoelectronic devices. As an example, Cs _xFA_{1- x}Pb(Br_{1- y}I _y)₃ NCs with an emission maximum at 735 nm were integrated into light-emitting diodes, exhibiting a high external quantum efficiency of 5.9% and a very narrow electroluminescence spectral bandwidth of 27 nm.

Ligand removal and photo-activation of CsPbBr3 quantum dots for enhanced optoelectronic devices

Perovskite quantum dots have recently emerged as a promising light source for optoelectronic applications. However, integrating them into devices while preserving their outstanding optical properties remains challenging. Due to their ionic nature, perovskite quantum dots are extremely sensitive and degrade on applying the simplest processes. To maintain their colloidal stability, they are surrounded by organic ligands; these prevent efficient charge carrier injection in devices and have to be removed. Here we report on a simple method, where a moderate thermal process followed by exposure to UV in air can efficiently remove ligands and increase the photo-luminescence of the room temperature synthesized perovskite quantum dot thin films. Annealing is accompanied by a red shift of the emission wavelength, usually attributed to the coalescence and irreversible degradation of the quantum dots. We show that it is actually related to the relaxation of the quantum dots upon the ligand removal, without the creation of non-radiative recombining defects. The quantum dot surface, as devoid of ligands, is subsequently photo-oxidized and smoothened upon exposure to UV in air, which drastically enhances their photo-luminescence. This adequate combination of treatments improves by more than an order of magnitude the performances of perovskite quantum dot light emitting diodes.

Efficient and Stable CsPbBr3 Quantum-Dot Powders Passivated and Encapsulated with a Mixed Silicon Nitride and Silicon Oxide Inorganic Polymer Matrix

Despite the excellent optical features of fully inorganic cesium lead halide (CsPbX₃) perovskite quantum dots (PeQDs), their unstable nature has limited their use in various optoelectronic devices. To mitigate the instability issues of PeQDs, we demonstrate the roles of dual-silicon nitride and silicon oxide ligands of the polysilazane (PSZ) inorganic polymer to passivate the surface defects and form a barrier layer coated onto green CsPbBr₃ QDs to maintain the high photoluminescence quantum yield (PLQY) and improve the environmental stability. The mixed SiN _x/SiN _xO _y/SiO _y passivated and encapsulated CsPbBr₃/PSZ core/shell composite can be prepared by a simple hydrolysis reaction involving the addition of adding PSZ as a precursor and a slight amount of water into a colloidal CsPbBr₃ QD solution. The degree of the moisture-induced hydrolysis reaction of PSZ can affect the compositional ratio of SiN _x, SiN _xO _y, and SiO _y liganded to the surfaces of the CsPbBr₃ QDs to optimize the PLQY and the stability of CsPbBr₃/PSZ core/shell composite, which shows a high PLQY (∼81.7%) with improved thermal, photo, air, and humidity stability as well under coarse conditions where the performance of CsPbBr₃ QDs typically deteriorate. To evaluate the suitability of the application of the CsPbBr₃/PSZ powder to down-converted white-light-emitting diodes (DC-WLEDs) as the backlight of a liquid crystal display (LCD), we fabricated an on-package type of tricolor-WLED by mixing the as-synthesized green CsPbBr₃/PSZ composite powder with red K₂SiF₆:Mn⁴⁺ phosphor powder and a poly(methyl methacrylate)-encapsulating binder and coating this mixed paste onto a cup-type blue LED. The fabricated WLED show high luminous efficacy of 138.6 lm/W (EQE = 51.4%) and a wide color gamut of 128% and 111% without and with color filters, respectively, at a correlated color temperature of 6762 K.

Lead-Free Perovskite Nanocrystals for Light-Emitting Devices

Lead halide perovskites with nanoscale geometries have received recent attention due to the defect-tolerant high photoluminescence quantum yield at tunable emission wavelengths and the possibility of room-temperature synthesis that does not compromise the physical properties of the materials. These characteristics offer opportunities to advance displays that cover the widest perceivable color. However, lead toxicity obstructs the commercialization of this technology. Therefore, recent efforts have investigated lead-free halide perovskite nanocrystals. Here, we provide our perspectives on the most exciting achievements in the materials design and photophysical properties of lead-free perovskite nanocrystals, particularly for applications in light-emitting devices. This Perspective includes a short summary on the characteristic features of halide perovskite nanocrystals; discussion on the candidate elements to replace lead; methods to prepare colloidal lead-free perovskite nanocrystals; methods to control and enhance the optical properties; a recent demonstration of utilizing lead-free perovskite nanocrystals in light-emitting devices; and an outlook on the field.

Surface ligand modification of cesium lead bromide nanocrystals for improved light-emitting performance

Cesium lead halide perovskite nanocrystals (NCs) possess excellent optical properties at visible wavelengths with great promise for applications in luminous display fields. We demonstrate a method to modify the surface ligand passivation of perovskite NCs for enhanced colloidal stability and emitting properties by incorporating didodecyl dimethyl ammonium bromide (DDAB). The photoluminescence quantum yield of the NC solution was improved to 96% from 70% and the perovskite film showed fewer trapped sites and enhanced carrier transport ability. The thus fabricated electroluminescent perovskite NC-LEDs exhibited a bright luminance of 11 990 cd m-2, corresponding to 4-times improved external quantum efficiency (EQE), compared to the control device using regular NCs without DDAB.

All-Ambient Processed Binary CsPbBr3-CsPb2Br5 Perovskites with Synergistic Enhancement for High-Efficiency Cs-Pb-Br-Based Solar Cells

All-inorganic CsPbBr₃ perovskite solar cells display outstanding stability toward moisture, light soaking, and thermal stressing, demonstrating great potential in tandem solar cells and toward commercialization. Unfortunately, it is still challenging to prepare high-performance CsPbBr₃ films at moderate temperatures. Herein, a uniform, compact CsPbBr₃ film was fabricated using its quantum dot (QD)-based ink precursor. The film was then treated using thiocyanate ethyl acetate (EA) solution in all-ambient conditions to produce a superior CsPbBr₃-CsPb₂Br₅ composite film with a larger grain size and minimal defects. The achievement was attributed to the surface dissolution and recrystallization of the existing SCN^- and EA. More specifically, the SCN^- ions were first absorbed on the Pb atoms, leading to the dissolution and stripping of Cs⁺ and Br^- ions from the CsPbBr₃ QDs. On the other hand, the EA solution enhances the diffusion dynamics of surface atoms and the surfactant species. It is found that a small amount of CsPb₂Br₅ in the composite film gives the best surface passivation, while the Br-rich surface decreases Br vacancies (V_Br) for a prolonged carrier lifetime. As a result, the fabricated device gives a higher solar cell efficiency of 6.81% with an outstanding long-term stability.

Benzoyl Halides as Alternative Precursors for the Colloidal Synthesis of Lead-Based Halide Perovskite Nanocrystals

We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic-inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX₂ (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX₃ NCs (in which A = Cs⁺, CH₃NH₃⁺, or CH(NH₂)₂⁺). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX₃ NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI₃ NCs, which crystallize in the cubic α phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX₃ perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions.

Benzoyl Halides as Alternative Precursors for the Colloidal Synthesis of Lead-Based Halide Perovskite Nanocrystals

We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic-inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX2 (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX3 NCs (in which A = Cs+, CH3NH3+, or CH(NH2)2+). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX3 NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI3 NCs, which crystallize in the cubic α phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX3 perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions.

High-Bandwidth White-Light System Combining a Micro-LED with Perovskite Quantum Dots for Visible Light Communication

This work proposes a high-bandwidth white-light system consisting of a blue gallium nitride (GaN) micro-LED (μLED) exciting yellow-emitting CsPbBr_1.8I_1.2 perovskite quantum dots (YQDs) for high-speed real-time visible light communication (VLC). The packaged 80 μm × 80 μm blue-emitting μLED has a modulation bandwidth of ∼160 MHz and a peak emission wavelength of ∼445 nm. The achievable bandwidth of the white-light system is up to 85 MHz in the absence of filters and equalization technology. Meanwhile, the bandwidth of the YQDs as a color converter is as high as 73 MHz with the blue GaN μLED as the pump source. A maximum data rate of 300 Mbps can be achieved by taking advantage of the high bandwidth of the white-light system using the non-return-to-zero on-off keying (NRZ-OOK) modulation scheme. The resultant bit-error rate is 2.0 × 10^-3, well beneath the forward error correction criterion of 3.8 × 10^-3 required for error-free data transmission. In addition, the YQDs which we proposed as a color converter possess high stability for VLC. After half a year, the achievable bandwidths of the white-light system and the YQDs are still up to 83 and 70 MHz, respectively. This study provides the direction of developing high-bandwidth white-light system for both high-efficiency solid-state lighting and high-speed VLC.

Pure zero-dimensional Cs4PbBr6 single crystal rhombohedral microdisks with high luminescence and stability

Zero-dimensional (0D) perovskite Cs₄PbBr₆ has been speculated to be an efficient solid-state emitter, exhibiting strong luminescense on achieving quantum confinement. Although several groups have reported strong green luminescence from Cs₄PbBr₆ powders and nanocrystals, doubts that the origin of luminescence comes from Cs₄PbBr₆ itself or CsPbBr₃ impurities have been a point of controversy in recent investigations. Herein, we developed a facile one-step solution self-assembly method to synthesize pure zero-dimensional rhombohedral Cs₄PbBr₆ micro-disks (MDs) with a high PLQY of 52% ± 5% and photoluminescence full-width at half maximum (FWHM) of 16.8 nm. The obtained rhombohedral MDs were high quality single-crystalline as demonstrated by XRD and SAED patterns. We demonstrated that Cs₄PbBr₆ MDs and CsPbBr₃ MDs were phase-separated from each other and the strong green emission comes from Cs₄PbBr₆. Power and temperature dependence spectra evidenced that the observed strong green luminescence of pure Cs₄PbBr₆ MDs originated from direct exciton recombination in the isolated octahedra with a large binding energy of 303.9 meV. Significantly, isolated PbBr₆^4- octahedra separated by a Cs⁺ ion insert in the crystal lattice is beneficial to maintaining the structural stability, depicting superior thermal and anion exchange stability. Our study provides an efficient approach to obtain high quality single-crystalline Cs₄PbBr₆ MDs with highly efficient luminescence and stability for further optoelectronic applications.

Perovskite Quantum Dots with Near Unity Solution and Neat-Film Photoluminescent Quantum Yield by Novel Spray Synthesis

In this study, a novel perovskite quantum dot (QD) spray-synthesis method is developed by combining traditional perovskite QD synthesis with the technique of spray pyrolysis. By utilizing this new technique, the synthesis of cubic-shaped perovskite QDs with a homogeneous size of 14 nm is demonstrated, which shows an unprecedented stable absolute photoluminescence quantum yield ≈100% in the solution and even in the solid-state neat film. The highly emissive thin films are integrated with light emission devices (LEDs) and organic light emission displays (OLEDs). The color conversion type QD-LED (ccQD-LED) hybrid devices exhibit an extremely saturated green emission, excellent external quantum efficiency of 28.1%, power efficiency of 121 lm W^-1 , and extraordinary forward-direction luminescence of 8 500 000 cd m^-2 . The conceptual ccQD-OLED hybrid display also successfully demonstrates high-definition still images and moving pictures with a 119% National Television System Committee 1931 color gamut and 123% Digital Cinema Initiatives-P3 color gamut. These very-stable, ultra-bright perovskite QDs have the properties necessary for a variety of useful applications in optoelectronics.

Metal Halide Perovskite Supercrystals: Gold-Bromide Complex Triggered Assembly of CsPbBr3 Nanocubes

Using nanocrystals as "artificial atoms" to construct supercrystals is an interesting process to explore the stacking style of nanoscale building blocks and corresponding collective properties. Various types of semiconducting supercrystals have been constructed via the assembly of nanocrystals driven by the entropic, electrostatic, or van der Waals interactions. We report a new type of metal halide perovskite supercrystals via the gold-bromide complex triggered assembly of newly emerged attractive CsPbBr₃ nanocubes. Through introducing gold-bromide (Au-Br) complexes into CsPbBr₃ nanocubes suspension, the self-assembly process of CsPbBr₃ nanocubes to form supercrystals was investigated with the different amount of Au-Br complexes added to the suspensions, which indicates that the driven force of the formation of CsPbBr₃ supercrystals included the van der Waals interactions among carbon chains and electrostatic interactions between Au-Br complexes and surfactants. Accordingly, the optical properties change with the assembly of CsPbBr₃ nanocubes and the variation of mesoscale structures of supercrystals with heating treatment was revealed as well, demonstrating the ionic characteristics of CsPbBr₃ nanocrystals. The fabricated CsPbBr₃ supercrystal presents a novel type of semiconducting supercrystals that will open an avenue for the assembly of ionic nanocrystals.

Photoluminescence of Zero-Dimensional Perovskites and Perovskite-Related Materials

Zero-dimensional (0-D) perovskites and perovskite-related materials are an emerging class of optoelectronic materials exhibiting strong excitonic properties and, quite often, high photoluminescence (PL) in the solid state. Here we highlight two different classes of 0-D perovskites with contrasting structural and optical properties, focusing mainly on the less explored but rapidly growing bulk quantum materials termed as 0-D perovskite-related materials (0-D PRMs), whose PL properties are quite intriguing and a topic of recent debate. We attempt to present here a comprehensive picture to rationalize the contrasting properties of the 0-D PRMs and provide an understanding of the mechanism of exciton dynamics and PL of this class of materials. We hope that exciting PL and tunable composition of these systems will help design of new materials with versatile optical properties suited for practical applications.

Colloidal synthesis of monolayer-thick formamidinium lead bromide perovskite nanosheets with a lateral size of micrometers

We synthesized FAPbBr₃ nanosheets of monolayer thickness and a lateral size of up to micrometers with extremely blue-shifted absorption and emission.

Silica-Coated Mn-Doped CsPb(Cl/Br)3 Inorganic Perovskite Quantum Dots: Exciton-to-Mn Energy Transfer and Blue-Excitable Solid-State Lighting

Tunability of emitting colors of perovskite quantum dots (PQDs) was generally realized via composition/size modulation. Due to their bandgap absorption and ionic crystal features, the mixing of multiple PQDs inevitably suffers from reabsorption and anion-exchange effects. Herein, we address these issues with high-content Mn²⁺-doped CsPbCl₃ PQDs that can yield blue-excitable orange Mn²⁺ emission benefited from exciton-to-Mn energy transfer and Cl-to-Br anion exchange. Silica-coating was applied to improve air stability of PQDs, suppress the loss of Mn²⁺, and avoid anion-exchange between different PQDs. As a direct benefit of intense multicolor emissions from Mn²⁺-doped PQD@SiO₂ solid phosphors, a prototype white light-emitting diode with excellent optical performance and superior light stability was constructed using green CsPbBr₃@SiO₂ and orange Mn: CsPb(Cl/Br)₃@SiO₂ composites as color converters, verifying their potential applications in the field of optoelectronics.

Synthesis of ultrasmall CsPbBr3 nanoclusters and their transformation to highly deep-blue-emitting nanoribbons at room temperature

Discretely sized semiconductor clusters have attracted considerable attention due to their intriguing optical properties and self-assembly behaviors. While lead halide perovskite nanostructures have been recently intensively explored, few studies have addressed perovskite clusters and their self-assembled superstructures. Here, we report the room-temperature synthesis of sub-2 nm CsPbBr₃ clusters and present strong evidence that these ultrasmall perovskite species, obtained under a wide range of reaction conditions, possess a specific size, with optical properties and self-assembly characteristics resembling those of well-known II-VI semiconductor magic-sized clusters. Unlike conventional CsPbBr₃ nanocrystals, the as-synthesized CsPbBr₃ nanoclusters spontaneously self-assemble into a hexagonally packed columnar mesophase in solution, which can be further converted to single-crystalline CsPbBr₃ quantum nanoribbons with bright deep-blue emission at room temperature. Such a conversion of CsPbBr₃ nanoclusters to nanoribbons is found to be driven by a ligand-destabilization-induced crystallization and mesophase transition process. Our study will facilitate the investigation of perovskite nanoclusters and offer new possibilities in the low-temperature synthesis of anisotropic perovskite nanostructures.

Nanorod Suprastructures from a Ternary Graphene Oxide-Polymer-CsPbX3 Perovskite Nanocrystal Composite That Display High Environmental Stability

Despite the exceptional optoelectronic characteristics of the emergent perovskite nanocrystals, the ionic nature greatly limits their stability, and thus restricts their potential applications. Here we have adapted a self-assembly strategy to access a rarely reported nanorod suprastructure that provide excellent encapsulation of perovskite nanocrystals by polymer-grafted graphene oxide layers. Polyacrylic acid-grafted graphene oxide (GO-g-PAA) was used as a surface ligand during the synthesis of the CsPbX₃ perovskite nanocrystals (NCs), yielding particles (5-12 nm) with tunable halide compositions that were homogeneously embedded in the GO-g-PAA matrix. The resulting NC-GO-g-PAA exhibits a higher photoluminescence quantum yield than previously reported encapsulated NCs while maintaining an easily tunable bandgap, allowing for emission spanning the visible spectrum. The NC-GO-g-PAA hybrid further self-assembles into well-defined nanorods upon solvent treatment. The resulting nanorod morphology imparts extraordinary chemical stability toward protic solvents such as methanol and water and much enhanced thermal stability. The introduction of barrier layers by embedding the perovskite NCs in the GO-g-PAA matrix, together with its unique assembly into nanorods, provides a novel strategy to afford robust perovskite emissive materials with environmental stability that may meet or exceed the requirement for optoelectronic applications.

Stabilization of the Cubic Crystalline Phase in Organometal Halide Perovskite Quantum Dots via Surface Energy Manipulation

Surface functionalization of nanoscale materials has a significant impact on their properties. We have demonstrated the effect of different passivating ligands on the crystal phase of organometal halide perovskite quantum dots (PQDs). Using static and dynamic spectroscopy, we studied phase transitions in CH₃NH₃PbBr₃ PQDs ligated with either octylaminebromide (P-OABr) or 3-aminopropyl triethoxysilane (P-APTES). Around 140 K, P-OABr underwent a structural phase transition from tetragonal to orthorhombic, established by the emergence of a higher energy band in the photoluminescence (PL) spectrum. This was not observed in P-APTES, despite cooling down to 20 K. Additionally, time-resolved and excitation power-dependent PL, as well as Raman spectroscopy over a range of 300-20 K, revealed that recombination rates and types of charge carriers involved are significantly different in P-APTES and P-OABr. Our findings highlight how aspects of PQD phase stabilization are linked to nanoscale morphology and the crystal phase diagram.

High-Performance Inorganic Perovskite Quantum Dot-Organic Semiconductor Hybrid Phototransistors

All-inorganic lead halide perovskite quantum dots (IHP QDs) have great potentials in photodetectors. However, the photoresponsivity is limited by the low charge transport efficiency of the IHP QD layers. High-performance phototransistors based on IHP QDs hybridized with organic semiconductors (OSCs) are developed. The smooth surface of IHP QD layers ensures ordered packing of the OSC molecules above them. The OSCs significantly improve the transportation of the photoexcited charges, and the gate effect of the transistor structure significantly enhances the photoresponsivity while simultaneously maintaining high I_photo /I_dark ratio. The devices exhibit outstanding optoelectronic properties in terms of photoresponsivity (1.7 × 10⁴ A W^-1 ), detectivity (2.0 × 10¹⁴ Jones), external quantum efficiency (67000%), I_photo /I_dark ratio (8.1 × 10⁴ ), and stability (100 d in air). The overall performances of our devices are superior to state-of-the-art IHP photodetectors. The strategy utilized here is general and can be easily applied to many other perovskite photodetectors.

Highly Luminescent Phase-Stable CsPbI3 Perovskite Quantum Dots Achieving Near 100% Absolute Photoluminescence Quantum Yield

Perovskite quantum dots (QDs) as a new type of colloidal nanocrystals have gained significant attention for both fundamental research and commercial applications owing to their appealing optoelectronic properties and excellent chemical processability. For their wide range of potential applications, synthesizing colloidal QDs with high crystal quality is of crucial importance. However, like most common QD systems such as CdSe and PbS, those reported perovskite QDs still suffer from a certain density of trapping defects, giving rise to detrimental nonradiative recombination centers and thus quenching luminescence. In this paper, we show that a high room-temperature photoluminescence quantum yield of up to 100% can be obtained in CsPbI₃ perovskite QDs, signifying the achievement of almost complete elimination of the trapping defects. This is realized with our improved synthetic protocol that involves introducing organolead compound trioctylphosphine-PbI₂ (TOP-PbI₂) as the reactive precursor, which also leads to a significantly improved stability for the resulting CsPbI₃ QD solutions. Ultrafast kinetic analysis with time-resolved transient absorption spectroscopy evidence the negligible electron or hole-trapping pathways in our QDs, which explains such a high quantum efficiency. We expect the successful synthesis of the "ideal" perovskite QDs will exert profound influence on their applications to both QD-based light-harvesting and -emitting devices.

Bright-Emitting Perovskite Films by Large-Scale Synthesis and Photoinduced Solid-State Transformation of CsPbBr3 Nanoplatelets

Lead halide perovskite nanocrystals are an emerging class of materials that have gained wide interest due to their facile color tuning and high photoluminescence quantum yield. However, the lack of techniques to translate the high performance of nanocrystals into solid films restricts the successful exploitation of such materials in optoelectronics applications. Here, we report a heat-up and large-scale synthesis of quantum-confined, blue-emitting CsPbBr₃ nanoplatelets (NPLs) that self-assemble into stacked lamellar structures. Spin-coated films fabricated from these NPLs show a stable blue emission with a photoluminescence quantum yield (PLQY) of 25%. The morphology and the optoelectronic properties of such films can be dramatically modified by UV-light irradiation under ambient conditions at a high power, which transforms the self-assembled stacks of NPLs into much larger structures, such as square-shaped disks and nanobelts. The emission from the transformed thin films falls within the green spectral region with a record PLQY of 65%, and they manifest an amplified spontaneous emission with a sharp line width of 4 nm at full-width at half-maximum under femtosecond-pulsed excitation. The transformed films show stable photocurrents with a responsivity of up to 15 mA/W and response times of tens of milliseconds and are robust under treatment with different solvents. We exploit their insolubility in ethanol to fabricate green-emitting, all-solution-processed light-emitting diodes with an external quantum efficiency of 1.1% and a luminance of 590 Cd/m².

Origin of the Substitution Mechanism for the Binding of Organic Ligands on the Surface of CsPbBr3 Perovskite Nanocubes

Optoelectronic properties of CsPbBr₃ perovskite nanocubes (NCs) depend strongly on the interaction of the organic passivating molecules with the inorganic crystal. To understand this interaction, we employed a combination of synchrotron-based X-ray photoelectron spectroscopy (XPS), nuclear magnetic resonance (NMR) spectroscopy, and first-principles density functional theory (DFT)-based calculations. Variable energy XPS elucidated the internal structure of the inorganic part in a layer-by-layer fashion, whereas NMR characterized the organic ligands. Our experimental results confirm that oleylammonium ions act as capping ligands by substituting Cs⁺ ions from the surface of CsPbBr₃ NCs. DFT calculations shows that the substitution mechanism does not require much energy for surface reconstruction and, in contrast, stabilizes the nanocrystal by the formation of three hydrogen bonds between the -NH₃⁺ moiety of oleylammonium and surrounding Br^- on the surface of NCs. This substitution mechanism and its origin are in stark contrast to the usual adsorption of organic ligands on the surface of typical NCs.

Doped Halide Perovskite Nanocrystals for Reabsorption-Free Luminescent Solar Concentrators

Halide perovskite nanocrystals (NCs) are promising solution-processed emitters for low-cost optoelectronics and photonics. Doping adds a degree of freedom for their design and enables us to fully decouple their absorption and emission functions. This is paramount for luminescent solar concentrators (LSCs) that enable fabrication of electrode-less solar windows for building-integrated photovoltaic applications. Here, we demonstrate the suitability of manganese-doped CsPbCl₃ NCs as reabsorption-free emitters for large-area LSCs. Light propagation measurements and Monte Carlo simulations indicate that the dopant emission is unaffected by reabsorption. Nanocomposite LSCs were fabricated via mass copolymerization of acrylate monomers, ensuring thermal and mechanical stability and optimal compatibility of the NCs, with fully preserved emission efficiency. As a result, perovskite LSCs behave closely to ideal devices, in which all portions of the illuminated area contribute equally to the total optical power. These results demonstrate the potential of doped perovskite NCs for LSCs, as well as for other photonic technologies relying on low-attenuation long-range optical wave guiding.

Modulating Excitonic Recombination Effects through One-Step Synthesis of Perovskite Nanoparticles for Light-Emitting Diodes

The primary advantages of halide perovskites for light-emitting diodes (LEDs) are solution processability, direct band gap, good charge-carrier diffusion lengths, low trap density, and reasonable carrier mobility. The luminescence in 3 D halide perovskite thin films originates from free electron-hole bimolecular recombination. However, the slow bimolecular recombination rate is a fundamental performance limitation. Perovskite nanoparticles could result in improved performance but processability and cumbersome synthetic procedures remain challenges. Herein, these constraints are overcome by tailoring the 3 D perovskite as a near monodisperse nanoparticle film prepared through a one-step in situ deposition method. Replacing methyl ammonium bromide (CH₃ NH₃ Br, MABr) partially by octyl ammonium bromide [CH₃ (CH₂ )₇ NH₃ Br, OABr] in defined mole ratios in the perovskite precursor proved crucial for the nanoparticle formation. Films consisting of the in situ formed nanoparticles displayed signatures associated with excitonic recombination, rather than that of bimolecular recombination associated with 3 D perovskites. This transition was accompanied by enhanced photoluminescence quantum yield (PLQY≈20.5 % vs. 3.40 %). Perovskite LEDs fabricated from the nanoparticle films exhibit a one order of magnitude improvement in current efficiency and doubling in luminance efficiency. The material processing systematics derived from this study provides the means to control perovskite morphologies through the selection and mixing of appropriate additives.

Controlling Crystallization of All-Inorganic Perovskite Films for Ultralow-Threshold Amplification Spontaneous Emission

All-inorganic lead halide perovskites have gained considerable interest owing to their potential applications in an array of high-performance optoelectronic devices. However, producing highly luminescent, nearly pinhole-free, all-inorganic perovskite films through a simple solution process remains challenging. Here, we provide a detailed investigation of the crystallization control of inorganic perovskite films fabricated by a one-step spin-coating process. Our results reveal that the coating temperature in the fabrication process is of paramount importance in influencing perovskite crystallization and that lowering the coating temperature and fine stoichiometry modification of the precursors favor the suppression of trap states in CsPbBr₃ perovskite films. A broad range of experimental characterizations help us identify that nonsynergistic assembly of solutes, resulting from poor diffusion capability of inorganic salts, is the dominant cause for the inhomogeneous element distribution, low luminescence yield, and poor surface coverage of the resulting films. Importantly, we find that polyethylene glycol can also be used for tailoring the crystallization process, which enables the attainment of high-quality CsPbBr₃ films with a maximum luminescence yield of ∼30%. Finally, we demonstrate that amplification spontaneous emission with an ultralow threshold can be readily accomplished by using the developed film as an emissive component. Our findings provide deep insights into the crystallization control of CsPbBr₃ perovskite films and establish a systematic route to high-quality all-inorganic perovskite films, paving the way for widespread optoelectronic applications.

Fluorescent Phase-Pure Zero-Dimensional Perovskite-Related Cs4PbBr6 Microdisks: Synthesis and Single-Particle Imaging Study

Quantum-confined perovskites are a new class of promising materials in optoelectronic applications. In this context, a zero-dimensional perovskite-related substance, Cs₄PbBr₆, having high exciton binding energy can be an important candidate, but its photoluminescence (PL) is a topic of recent debate. Herein, we report an ambient condition controlled synthesis of Cs₄PbBr₆ microdisks of different shapes and dimensions which exhibit fairly strong green PL (quantum yield up to 38%, band gap ∼2.43 eV) in the solid state. Using confocal fluorescence microscopy imaging of the single particles, we show that the fluorescence of Cs₄PbBr₆ microdisks is inherent to these particles. Fluorescence intensity and lifetime imaging of the microdisks reveals significant spatial heterogeneity with a bright central area and somewhat dimmer edges. This intensity and lifetime distribution is attributed to enhanced trap-mediated nonradiative deactivation at the edges compared to the central region of the microdisks. Our results, which unambiguously establish the PL of these Cs₄PbBr₆ and suggest its possible origin, brighten the potential of these materials in photon-emitting applications.

Highly luminescent, stable, transparent and flexible perovskite quantum dot gels towards light-emitting diodes

By controlling the hydrolysis of alkoxysilanes, highly luminescent, transparent and flexible perovskite quantum dot (QD) gels were synthesized. The gels could maintain the structure without shrinking and exhibited excellent stability comparing to the QDs in solution. This in situ fabrication can be easily scaled up for large-area/volume gels. The gels integrated the merits of the polymer matrices to avoid the non-uniformity of light output, making it convenient for practical LED applications. Monochrome and white LEDs were fabricated using these QD gels; the LEDs exhibited broader color gamut, demonstrating better property in the backlight display application.

Light-emitting-diode Lambertian light sources as low-radiant-flux standards applicable to quantitative luminescence-intensity imaging

Planar-type Lambertian light-emitting diodes (LEDs) with a circular aperture of several tens of μm to a few mm in diameter were developed for use as radiant-flux standard light sources, which have been in strong demand for applications such as quantitative or absolute intensity measurements of weak luminescence from solid-state materials and devices. Via pulse-width modulation, time-averaged emission intensity of the LED devices was controlled linearly to cover a wide dynamic range of about nine orders of magnitude, from 10 μW down to 10 fW. The developed planar LED devices were applied as the radiant-flux standards to quantitative measurements and analyses of photoluminescence (PL) intensity and PL quantum efficiency of a GaAs quantum-well sample. The results demonstrated the utility and applicability of the LED standards in quantitative luminescence-intensity measurements in Lambertian-type low radiant-flux level sources.

Highly Efficient Light-Emitting Diodes of Colloidal Metal-Halide Perovskite Nanocrystals beyond Quantum Size

Colloidal metal-halide perovskite quantum dots (QDs) with a dimension less than the exciton Bohr diameter D_B (quantum size regime) emerged as promising light emitters due to their spectrally narrow light, facile color tuning, and high photoluminescence quantum efficiency (PLQE). However, their size-sensitive emission wavelength and color purity and low electroluminescence efficiency are still challenging aspects. Here, we demonstrate highly efficient light-emitting diodes (LEDs) based on the colloidal perovskite nanocrystals (NCs) in a dimension > D_B (regime beyond quantum size) by using a multifunctional buffer hole injection layer (Buf-HIL). The perovskite NCs with a dimension greater than D_B show a size-irrespective high color purity and PLQE by managing the recombination of excitons occurring at surface traps and inside the NCs. The Buf-HIL composed of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) and perfluorinated ionomer induces uniform perovskite particle films with complete film coverage and prevents exciton quenching at the PEDOT:PSS/perovskite particle film interface. With these strategies, we achieved a very high PLQE (∼60.5%) in compact perovskite particle films without any complex post-treatments and multilayers and a high current efficiency of 15.5 cd/A in the LEDs of colloidal perovskite NCs, even in a simplified structure, which is the highest efficiency to date in green LEDs that use colloidal organic-inorganic metal-halide perovskite nanoparticles including perovskite QDs and NCs. These results can help to guide development of various light-emitting optoelectronic applications based on perovskite NCs.

Role of Nonradiative Defects and Environmental Oxygen on Exciton Recombination Processes in CsPbBr3 Perovskite Nanocrystals

Lead halide perovskite nanocrystals (NCs) are emerging as optically active materials for solution-processed optoelectronic devices. Despite the technological relevance of tracing rational guidelines for optimizing their performances and stability beyond their intrinsic resilience to structural imperfections, no in-depth study of the role of selective carrier trapping and environmental conditions on their exciton dynamics has been reported to date. Here we conduct spectro-electrochemical (SEC) experiments, side-by-side to oxygen sensing measurements on CsPbBr3 NCs for the first time. We show that the application of EC potentials controls the emission intensity by altering the occupancy of defect states without degrading the NCs. Reductive potentials lead to strong (60%) emission quenching by trapping of photogenerated holes, whereas the concomitant suppression of electron trapping is nearly inconsequential to the emission efficiency. Consistently, oxidizing conditions result in minor (5%) brightening due to suppressed hole trapping, confirming that electron traps play a minor role in nonradiative decay. This behavior is rationalized through a model that links the occupancy of trap sites with the position of the NC Fermi level controlled by the EC potential. Photoluminescence measurements in controlled atmosphere reveal strong quenching by collisional interactions with O2, which is in contrast to the photobrightening effect observed in films and single crystals. This indicates that O2 acts as a scavenger of photoexcited electrons without mediation by structural defects and, together with the asymmetrical SEC response, suggests that electron-rich defects are likely less abundant in nanostructured perovskites than in the bulk, leading to an emission response dominated by direct interaction with the environment.

Surface passivation of mixed-halide perovskite CsPb(BrxI1-x)3 nanocrystals by selective etching for improved stability

In recent years, there has been an unprecedented rise in the research of halide perovskites because of their important optoelectronic applications, including photovoltaic cells, light-emitting diodes, photodetectors and lasers. The most pressing question concerns the stability of these materials. Here faster degradation and PL quenching are observed at higher iodine content for mixed-halide perovskite CsPb(Br_xI_1-x)₃ nanocrystals, and a simple yet effective method is reported to significantly enhance their stability. After selective etching with acetone, surface iodine is partially etched away to form a bromine-rich surface passivation layer on mixed-halide perovskite nanocrystals. This passivation layer remarkably stabilizes the nanocrystals, making their PL intensity improved by almost three orders of magnitude. It is expected that a similar passivation layer can also be applied to various other kinds of perovskite materials with poor stability issues.

Synthesis and Stabilization of Colloidal Perovskite Nanocrystals by Multidentate Polymer Micelles

Lead halide perovskites have emerged as low-cost, high-performance optical and optoelectronic materials, however, their material stability has been a limiting factor for broad applications. Here, we demonstrate stable core-shell colloidal perovskite nanocrystals using a novel, facile and low-cost copolymer templated synthesis approach. The block copolymer serves as a confined nanoreactor during perovskite crystallization and passivates the perovskite surface by forming a multidentate capping shell, thus significantly improving its photostability in polar solvents. Meanwhile, the polymer nanoshell provides an additional layer for further surface modifications, paving the way to functional nanodevices that can be self-assembled or lithographically defined.

Investigation of anti-solvent induced optical properties change of cesium lead bromide iodide mixed perovskite (CsPbBr3-xIx) quantum dots

Cesium lead halide (CsPbX₃, X=Cl, Br, I) perovskites are a new material system that has attracted a lot of research focus. Its tunable band gap and better thermal stability than organic lead halide perovskite give it the potential for applications in optoelectronic devices such as light-emitting diodes and solar cells. Here we have synthesized CsPbBr_3-xI_x perovskite quantum dots (QDs) via a solution process, and then have selected three different anti-solvents to purify the product. A significant effect on optical properties of CsPbBr_3-xI_x was found after the centrifugation process. Up to a ∼40nm shift was observed in mixed halide CsPbBr_3-xI_x QDs in both absorbance and PL spectra after purification while there was no obvious change in pure CsPbBr₃ when it was subjected to the same purification steps. XPS analysis shows that the Br:I ratio of the CsPbBr_3-xI_x QDs had changed as a result of exposure to the anti-solvent, causing the change of the band gap and shift of the spectra. It is also shown that iodine can be removed more easily than bromine during the anti-solvent purification. Ab-initio simulations of small CsPbBr_3-xI_x atomic clusters suggest that exposed Cs ions on Cs-terminated facets are the first species to be attacked by hydrophilic molecules, likely dragging halide ions into solution with them to maintain overall charge neutrality in the material. Charge carrier recombination rates were found to be unchanged and all samples maintained a good PL quantum yield which was more than 44%.

Colloidal thallium halide nanocrystals with reasonable luminescence, carrier mobility and diffusion length

Colloidal lead halide based perovskite nanocrystals (NCs) have been recently established as an interesting class of defect-tolerant NCs with potential for superior optoelectronic applications. The electronic band structure of thallium halides (TlX, where X = Br and I) show a strong resemblance to lead halide perovskites, where both Pb2+ and Tl+ exhibit a 6s2 inert pair of electrons and strong spin-orbit coupling. Although the crystal structure of TlX is not perovskite, the similarities of its electronic structure with lead halide perovskites motivated us to prepare colloidal TlX NCs. These TlX NCs exhibit a wide bandgap (>2.5 eV or <500 nm) and the potential to exhibit a reduced density of deep defect states. Optical pump terahertz (THz) probe spectroscopy with excitation fluence in the range of 0.85-5.86 × 1013 photons per cm2 on NC films shows that the TlBr NCs possess high effective carrier mobility (∼220 to 329 cm2 V-1 s-1), long diffusion length (∼0.77 to 0.98 μm), and reasonably high photoluminescence efficiency (∼10%). This combination of properties is remarkable compared to other wide-bandgap (>2.5 eV) semiconductor NCs, which suggests a reduction in the deep-defect states in the TlX NCs. Furthermore, the ultrafast carrier dynamics and temperature-dependent reversible structural phase transition together with its influence on the optical properties of the TlX NCs are studied.

Highly Emissive Green Perovskite Nanocrystals in a Solid State Crystalline Matrix

Perovskite nanocrystals (NCs) have attracted attention due to their high photoluminescence quantum yield (PLQY) in solution; however, maintaining high emission efficiency in the solid state remains a challenge. This study presents a solution-phase synthesis of efficient green-emitting perovskite NCs (CsPbBr₃ ) embedded in robust and air-stable rhombic prism hexabromide (Cs₄ PbBr₆ ) microcrystals, reaching a PLQY of 90%. Theoretical modeling and experimental characterization suggest that lattice matching between the NCs and the matrix contribute to improved passivation, while spatial confinement enhances the radiative rate of the NCs. In addition, dispersing the NCs in a matrix prevents agglomeration, which explains their high PLQY.

High-Brightness Blue and White LEDs based on Inorganic Perovskite Nanocrystals and their Composites

Inorganic metal halide perovskite nanocrystals (NCs) have been employed universally in light-emitting applications during the past two years. Here, blue-emission (≈470 nm) Cs-based perovskite NCs are derived by directly mixing synthesized bromide and chloride nanocrystals with a weight ratio of 2:1. High-brightness blue perovskite light-emitting diodes (PeLEDs) are obtained by controlling the grain size of the perovskite films. Moreover, a white PeLED is demonstrated for the first time by blending orange polymer materials with the blue perovskite nanocrystals as the active layer. Exciton transfer from the blue nanocrystals to the orange polymers via Förster or Dexter energy transfer is analyzed through time resolved photoluminescence. By tuning the ratio between the perovskite nanocrystals and polymers, pure white light is achieved with the a CIE coordinate at (0.33,0.34).

Coherent Nanotwins and Dynamic Disorder in Cesium Lead Halide Perovskite Nanocrystals

Crystal defects in highy luminescent colloidal nanocrystals (NCs) of CsPbX₃ perovskites (X = Cl, Br, I) are investigated. Here, using X-ray total scattering techniques and the Debye scattering equation (DSE), we provide evidence that the local structure of these NCs always exhibits orthorhombic tilting of PbX₆ octahedra within locally ordered subdomains. These subdomains are hinged through a two-/three-dimensional (2D/3D) network of twin boundaries through which the coherent arrangement of the Pb ions throughout the whole NC is preserved. The density of these twin boundaries determines the size of the subdomains and results in an apparent higher-symmetry structure on average in the high-temperature modification. Dynamic cooperative rotations of PbX₆ octahedra are likely at work at the twin boundaries, causing the rearrangement of the 2D or 3D network, particularly effective in the pseudocubic phases. An orthorhombic, 3D γ-phase, isostructural to that of CsPbBr₃ is found here in as-synthesized CsPbI₃ NCs.

A CsPbBr3 Perovskite Quantum Dot/Graphene Oxide Composite for Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs), primarily regarded as optoelectronic materials for LED and photovoltaic devices, have not been applied for photochemical conversion (e.g., water splitting or CO₂ reduction) applications because of their insufficient stability in the presence of moisture or polar solvents. Herein, we report the use of CsPbBr₃ QDs as novel photocatalysts to convert CO₂ into solar fuels in nonaqueous media. Under AM 1.5G simulated illumination, the CsPbBr₃ QDs steadily generated and injected electrons into CO₂, catalyzing CO₂ reduction at a rate of 23.7 μmol/g h with a selectivity over 99.3%. Additionally, through the construction of a CsPbBr₃ QD/graphene oxide (CsPbBr₃ QD/GO) composite, the rate of electron consumption increased 25.5% because of improved electron extraction and transport. This study is anticipated to provide new opportunities to utilize halide perovskite QD materials in photocatalytic applications.