Prospects of nanoscience with nanocrystals

Rapid In Situ Ligand-Exchange Process Used to Prepare 3D PbSe Nanocrystal Superlattice Infrared Photodetectors

Colloidal semiconductor nanocrystals are important building blocks for low-cost, solution-processed electronic devices with tunable functionalities. Considerable progress is made in improving charge transport through nanocrystal films by exchanging long insulating ligands with shorter passivating ligands. To take full advantage of this strategy, it is equally important to fabricate close-packed structures that reduce the average interparticle spacing. Yet it remains a challenge to retain long-range, close-packed order after ligand exchange. Here, a novel one-step in situ ligand-exchange method is demonstrated that enables rapid (5 min) ligand exchange of nanocrystal films, which are more than 50 layers thick. Using this simple and efficient method, it is shown that the face-centered cubic ordering of 500 nm thick PbSe nanocrystal films is retained after ligand exchange from oleic acid to benzoic acid. Moreover, it is demonstrated that PbSe nanocrystal photodetectors with a well-ordered structure have superior optoelectronic properties compared to disordered films; ordered films have a 16× higher responsivity of ≈0.25 A W^-1 at 1 V and a 2× faster response time. As far as it is known, this is the first report to realize a rapid one-step ligand exchange through a thick superlattice film with retention of long-range order.

Dynamic Formation of Metal-Based Traps in Photoexcited Colloidal Quantum Dots and Their Relevance for Photoluminescence

Trap states play a crucial role in the design of colloidal quantum dot (QD)-based technologies. The presence of these in-gap states can either significantly limit the efficiency of devices (e.g., in solar cells or LEDs) or play a pivotal role in the functioning of the technology (e.g., in catalysis). Understanding the atomistic nature of traps is therefore of the highest importance. Although the mechanism through which undercoordinated chalcogenide atoms can lead to trap states in II-VI QDs is generally well understood, the nature of metal-based traps remains more elusive. Previous research has shown that reduction of metal sites in negatively charged QDs can lead to in-gap states. Here, we use density functional theory to show that metal-based traps are also formed in charge-neutral but photoexcited CdSe QDs. It is found that Cd-Cd dimers and the concomitant trap states are transient in nature and appear and disappear on the picosecond time scale. Subsequent nonradiative recombination from the trap is shown to be much faster than radiative recombination, indicating that dimer-related trap states can quench the photoluminescence. These results are expected to be transferable to other II-VI materials and highlight the importance of surface redox reactions for the optical properties of QDs. Moreover, they show that photoexcitation can lead to atomic rearrangements on the surface and thus create transient in-gap states.

Investigation of the Stability of Methylammonium Lead Iodide (MAPbI3) Film Doped with Lead Cesium Triiodide (CsPbI3) Quantum Dots under an Oxygen Plasma Atmosphere

In this study, we describe composited perovskite films based on the doping of lead cesium triiodide (CsPbI₃) quantum dots (QDs) into methylammonium lead iodide (MAPbI₃). CsPbI₃ QDs and MAPbI₃ were prepared by ligand-assisted re-precipitation and solution mixing, respectively. These films were optimized by oxygen plasma treatment, and the effect of powers from 0 to 80 W on the structural properties of the composited perovskite films is discussed. The experimental results showed that the light-harvesting ability of the films was enhanced at 20 W. The formation of the metastable state (lead(II) oxide and lead tetroxide) was demonstrated by peak differentiation-imitating. A low power enhanced the quality of the films due to the removal of organic impurities, whereas a high power caused surface damage in the films owing to the severe degradation of MAPbI₃.

Ion Exchange Lithography: Localized Ion Exchange Reactions for Spatial Patterning of Perovskite Semiconductors and Insulators

Patterning materials with different properties in a single film is a fundamental challenge and essential for the development of next-generation (opto)electronic functional components. This work introduces the concept of ion exchange lithography and demonstrates spatially controlled patterning of electrically insulating films and semiconductors with tunable optoelectronic properties. In ion exchange lithography, a reactive nanoparticle "canvas" is locally converted by printing ion exchange "inks." To demonstrate the proof of principle, a canvas of insulating nanoporous lead carbonate is spatioselectively converted into semiconducting lead halide perovskites by contact printing an ion exchange precursor ink of methylammonium and formamidinium halides. By selecting the composition of the ink, the photoluminescence wavelength of the perovskite semiconductors is tunable over the entire visible spectrum. A broad palette of conversion inks can be applied on the reactive film by printing with customizable stamp designs, spray-painting with stencils, and painting with a brush to inscribe well-defined patterns with tunable optoelectronic properties in the same canvas. Moreover, the optoelectronic properties of the converted canvas are exploited to fabricate a green light-emitting diode (LED), demonstrating the functionality potential of ion exchange lithography.

Nanocrystal Quantum Dots: From Discovery to Modern Development

This review traces nanocrystal quantum dot (QD) research from the early discoveries to the present day and into the future. We describe the extensive body of theoretical and experimental knowledge that comprises the modern science of QDs. Indeed, the spatial confinement of electrons, holes, and excitons in nanocrystals, coupled with the ability of modern chemical synthesis to make complex designed structures, is today enabling multiple applications of QD size-tunable electronic and optical properties.

Single Trap States in Single CdSe Nanoplatelets

Trap states can strongly affect semiconductor nanocrystals, by quenching, delaying, and spectrally shifting the photoluminescence (PL). Trap states have proven elusive and difficult to study in detail at the ensemble level, let alone in the single-trap regime. CdSe nanoplatelets (NPLs) exhibit significant fractions of long-lived "delayed emission" and near-infrared "trap emission". We use these two spectroscopic handles to study trap states at the ensemble and the single-particle level. We find that reversible hole trapping leads to both delayed and trap PL, involving the same trap states. At the single-particle level, reversible trapping induces exponential delayed PL and trap PL, with lifetimes ranging from 40 to 1300 ns. In contrast with exciton PL, single-trap PL is broad and shows spectral diffusion and strictly single-photon emission. Our results highlight the large inhomogeneity of trap states, even at the single-particle level.

Insights into Nucleation and Growth of Colloidal Quaternary Nanocrystals by Multimodal X-ray Analysis

Copper chalcogenide nanocrystals find applications in photovoltaic inks, bio labels, and thermoelectric materials. We reveal insights in the nucleation and growth during synthesis of anisotropic Cu2ZnSnS4 nanocrystals by simultaneously performing in situ X-ray absorption spectroscopy (XAS) and small-angle X-ray scattering (SAXS). Real-time XAFS reveals that upon thiol injection into the reaction flask, a key copper thiolate intermediate species is formed within fractions of seconds, which decomposes further within a narrow temperature and time window to form copper sulfide nanocrystals. These nanocrystals convert into Cu2ZnSnS4 nanorods by sequentially incorporating Sn and Zn. Real-time SAXS and ex situ TEM of aliquots corroborate these findings. Our work demonstrates how combined in situ X-ray absorption and small-angle X-ray scattering enables the understanding of mechanistic pathways in colloidal nanocrystal formation.

Exposure-time-dependent subcellular staging of gold nanoparticles deposition and vesicle destruction in mice livers

Several advances in nanomedicine have been accompanied by rising concerns about the bioaccumulation and toxicity of gold nanoparticles (AuNPs). Here, we assessed the in vivo fate of diversely sized AuNPs that were injected into mice as a computed tomography contrast agent and examined with multi-scale analyses across the organ, tissue, cell, and subcellular levels. After focusing on the strong detected accumulation in livers, our data revealed a set of three clear, exposure-time-dependent patterns based on i) AuNPs deposit morphology and ii) readily identifiable phenotypes for AuNP-impacted subcellular vesicles. Importantly, we detected no obvious differences in liver function, liver cell apoptosis, or autophagy upon exposure to AuNPs. Thus, our study illustrates an accessible experimental and high-resolution data interpretation framework for quickly obtaining and contextualizing informative trends about any AuNP-triggered patterns of subcellular damage in nanomedicine studies; these can help guide cytotoxity and safety testing of diagnostic nanomedical technologies.

Dithiocarbamate Complexes as Single Source Precursors to Nanoscale Binary, Ternary and Quaternary Metal Sulfides

Nanodimensional metal sulfides are a developing class of low-cost materials with potential applications in areas as wide-ranging as energy storage, electrocatalysis, and imaging. An attractive synthetic strategy, which allows careful control over stoichiometry, is the single source precursor (SSP) approach in which well-defined molecular species containing preformed metal-sulfur bonds are heated to decomposition, either in the vapor or solution phase, resulting in facile loss of organics and formation of nanodimensional metal sulfides. By careful control of the precursor, the decomposition environment and addition of surfactants, this approach affords a range of nanocrystalline materials from a library of precursors. Dithiocarbamates (DTCs) are monoanionic chelating ligands that have been known for over a century and find applications in agriculture, medicine, and materials science. They are easily prepared from nontoxic secondary and primary amines and form stable complexes with all elements. Since pioneering work in the late 1980s, the use of DTC complexes as SSPs to a wide range of binary, ternary, and multinary sulfides has been extensively documented. This review maps these developments, from the formation of thin films, often comprised of embedded nanocrystals, to quantum dots coated with organic ligands or shelled by other metal sulfides that show high photoluminescence quantum yields, and a range of other nanomaterials in which both the phase and morphology of the nanocrystals can be engineered, allowing fine-tuning of technologically important physical properties, thus opening up a myriad of potential applications.

Ag48 and Ag50 Nanoclusters: Toward Active-Site Tailoring of Nanocluster Surface Structures

The determination of active sites in metal nanoclusters is of great significance for the in-depth understanding of the structural evolution and the mechanism of physicochemical properties. In this work, the surface active Ag₂(SR)₃ units of the Ag₄₈Cl₁₄(S-Adm)₃₀ nanocluster are determined, and the active-site tailoring of this nanocluster gives rise to two derivative nanoclusters, i.e., the structure-maintained Ag₄₈Cl₁₄(S-Adm)₂₆(S-c-C₆H₁₁)₄ and the structure-growth Ag₅₀Cl₁₆(S-Adm)₂₈(DPPP)₂. Both Ag₄₈ and Ag₅₀ nanoclusters exhibit almost the same cluster framework, but the Ag₂(S-Adm)₃ active units are regulated to Ag₃(S-Adm)₂(DPPP)₁Cl₁ with the transformation from Ag₄₈ to Ag₅₀. The surface active sites on Ag₄₈ are rationalized by analyzing its crystal structure and the ligand-exchange-induced cluster transformation. This study provides some inspiration toward the active-site tailoring of nanocluster surface structures, which is significant for the preparation of new cluster-based nanomaterials with customized structures and enhanced performance.

Hierarchical carrier transport simulator for defected nanoparticle solids

The efficiency of nanoparticle (NP) solar cells has grown impressively in recent years, exceeding 16%. However, the carrier mobility in NP solar cells, and in other optoelectronic applications remains low, thus critically limiting their performance. Therefore, carrier transport in NP solids needs to be better understood to further improve the overall efficiency of NP solar cell technology. However, it is technically challenging to simulate experimental scale samples, as physical processes from atomic to mesoscopic scales all crucially impact transport. To rise to this challenge, here we report the development of TRIDENS: the Transport in Defected Nanoparticle Solids Simulator, that adds three more hierarchical layers to our previously developed HINTS code for nanoparticle solar cells. In TRIDENS, we first introduced planar defects, such as twin planes and grain boundaries into individual NP SLs superlattices (SLs) that comprised the order of 10³ NPs. Then we used HINTS to simulate the transport across tens of thousands of defected NP SLs, and constructed the distribution of the NP SL mobilities with planar defects. Second, the defected NP SLs were assembled into a resistor network with more than 10⁴ NP SLs, thus representing about 10⁷ individual NPs. Finally, the TRIDENS results were analyzed by finite size scaling to explore whether the percolation transition, separating the phase where the low mobility defected NP SLs percolate, from the phase where the high mobility undefected NP SLs percolate drives a low-mobility-to-highmobility transport crossover that can be extrapolated to genuinely macroscopic length scales. For the theoretical description, we adapted the Efros-Shklovskii bimodal mobility distribution percolation model. We demonstrated that the ES bimodal theory’s two-variable scaling function is an effective tool to quantitatively characterize this low-mobility-to-high-mobility transport crossover.

Measuring, controlling and exploiting heterogeneity in optoelectronic nanowires

Fabricated from ZnO, III-N, chalcogenide-based, III-V, hybrid perovskite or other materials, semiconductor nanowires offer single-element and array functionality as photovoltaic, non-linear, electroluminescent and lasing components. In many applications their advantageous properties emerge from their geometry; a high surface-to-volume ratio for facile access to carriers, wavelength-scale dimensions for waveguiding or a small nanowire-substrate footprint enabling heterogeneous growth. However, inhomogeneity during bottom-up growth is ubiquitous and can impact morphology, geometry, crystal structure, defect density, heterostructure dimensions and ultimately functional performance. In this topical review, we discuss the origin and impact of heterogeneity within and between optoelectronic nanowires, and introduce methods to assess, optimise and ultimately exploit wire-to-wire disorder.

A General Approach for Monolayer Adsorption of High Weight Loadings of Uniform Nanocrystals on Oxide Supports

Monodispersed metal and semiconductor nanocrystals have attracted great attention in fundamental and applied research due to their tunable size, morphology, and well-defined chemical composition. Utilizing these nanocrystals in a controllable way is highly desirable especially when using them as building blocks for the preparation of nanostructured materials. Their deposition onto oxide materials provide them with wide applicability in many areas, including catalysis. However, so far deposition methods are limited and do not provide control to achieve high particle loadings. This study demonstrates a general approach for the deposition of hydrophobic ligand-stabilized nanocrystals on hydrophilic oxide supports without ligand-exchange. Surface functionalization of the supports with primary amine groups either using an organosilane ((3-aminopropyl)trimethoxysilane) or bonding with aminoalcohols (3-amino-1,2-propanediol) were found to significantly improve the interaction between nanocrystals and supports achieving high loadings (>10 wt. %). The bonding method with aminoalcohols guarantees the opportunity to remove the binding molecules thus allowing clean metal/oxide materials to be obtained, which is of great importance in the preparation of supported nanocrystals for heterogeneous catalysis.

Dynamic lattice distortions driven by surface trapping in semiconductor nanocrystals

Nonradiative processes limit optoelectronic functionality of nanocrystals and curb their device performance. Nevertheless, the dynamic structural origins of nonradiative relaxations in such materials are not understood. Here, femtosecond electron diffraction measurements corroborated by atomistic simulations uncover transient lattice deformations accompanying radiationless electronic processes in colloidal semiconductor nanocrystals. Investigation of the excitation energy dependence in a core/shell system shows that hot carriers created by a photon energy considerably larger than the bandgap induce structural distortions at nanocrystal surfaces on few picosecond timescales associated with the localization of trapped holes. On the other hand, carriers created by a photon energy close to the bandgap of the core in the same system result in transient lattice heating that occurs on a much longer 200 picosecond timescale, dominated by an Auger heating mechanism. Elucidation of the structural deformations associated with the surface trapping of hot holes provides atomic-scale insights into the mechanisms deteriorating optoelectronic performance and a pathway towards minimizing these losses in nanocrystal devices.

Charge trapping can lead to severe nonradiative losses in colloidal semiconductor nanocrystals (NCs). The authors report femtosecond electron diffraction measurements on photoexcited NCs to reveal atomic-scale insights into how localization of charges at trap sites induce surface deformations.

Extended Nucleation and Superfocusing in Colloidal Semiconductor Nanocrystal Synthesis

Hot-injection synthesis is renowned for producing semiconductor nanocolloids with superb size dispersions. Burst nucleation and diffusion-controlled size focusing during growth have been invoked to rationalize this characteristic yet experimental evidence supporting the pertinence of these concepts is scant. By monitoring a CdSe synthesis in-situ with X-ray scattering, we find that nucleation is an extended event that coincides with growth during 15-20% of the reaction time. Moreover, we show that size focusing outpaces predictions of diffusion-limited growth. This observation indicates that nanocrystal growth is dictated by the surface reactivity, which drops sharply for larger nanocrystals. Kinetic reaction simulations confirm that this so-called superfocusing can lengthen the nucleation period and promote size focusing. The finding that narrow size dispersions can emerge from the counteracting effects of extended nucleation and reaction-limited size focusing ushers in an evidence-based perspective that turns hot injection into a rational scheme to produce monodisperse semiconductor nanocolloids.

Understanding and Controlling the Crystallization Process in Reconfigurable Plasmonic Superlattices

The crystallization of nanomaterials is a primary source of solid-state, photonic structures. Thus, a detailed understanding of this process is of paramount importance for the successful application of photonic nanomaterials in emerging optoelectronic technologies. While colloidal crystallization has been thoroughly studied, for example, with advanced in situ electron microscopy methods, the noncolloidal crystallization (freezing) of nanoparticles (NPs) remains so far unexplored. To fill this gap, in this work, we present proof-of-principle experiments decoding a crystallization of reconfigurable assemblies of NPs at a solid state. The chosen material corresponds to an excellent testing bed, as it enables both in situ and ex situ investigation using X-ray diffraction (XRD), transmission electron microscopy (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atomic force microscopy (AFM), and optical spectroscopy in visible and ultraviolet range (UV-vis) techniques. In particular, ensemble measurements with small-angle XRD highlighted the dependence of the correlation length in the NPs assemblies on the number of heating/cooling cycles and the rate of cooling. Ex situ TEM imaging further supported these results by revealing a dependence of domain size and structure on the sample preparation route and by showing we can control the domain size over 2 orders of magnitude. The application of HAADF-STEM tomography, combined with in situ thermal control, provided three-dimensional single-particle level information on the positional order evolution within assemblies. This combination of real and reciprocal space provides insightful information on the anisotropic, reversibly reconfigurable assemblies of NPs. TEM measurements also highlighted the importance of interfaces in the polydomain structure of nanoparticle solids, allowing us to understand experimentally observed differences in UV-vis extinction spectra of the differently prepared crystallites. Overall, the obtained results show that the combination of in situ heating HAADF-STEM tomography with XRD and ex situ TEM techniques is a powerful approach to study nanoparticle freezing processes and to reveal the crucial impact of disorder in the solid-state aggregates of NPs on their plasmonic properties.

Atomically precise vanadium-oxide clusters

Polyoxovanadate (POV) clusters are an important subclass of polyoxometalates with a broad range of molecular compositions and physicochemical properties. One relatively underdeveloped application of these polynuclear assemblies involves their use as atomically precise, homogenous molecular models for bulk metal oxides. Given the structural and electronic similarities of POVs and extended vanadium oxide materials, as well as the relative ease of modifying the homogenous congeners, investigation of the chemical and physical properties of pristine and modified cluster complexes presents a method toward understanding the influence of structural modifications (e.g. crystal structure/phase, chemical makeup of surface ligands, elemental dopants) on the properties of extended solids. This review summarises recent advances in the use of POV clusters as atomically precise models for bulk metal oxides, with particular focus on the assembly of vanadium oxide clusters and the consequences of altering the molecular composition of the assembly via organofunctionalization and the incorporation of elemental "dopants".

Tuning radiative lifetimes in semiconductor quantum dots

Photonic devices stand to benefit from the development of chromophores with tunable, precisely controlled spontaneous emission lifetimes. Here, we demonstrate a method to continuously tune the radiative emission lifetimes of a class of chromophores by varying the density of electronic states involved in the emission process. In particular, we examined the peculiar composition-dependent electronic structure of copper doped CdZnSe quantum dots. It is shown that the nature and density of electronic states involved with the emission process is a function of copper inclusion level, providing a very direct handle for controlling the spontaneous lifetimes. The spontaneous emission lifetimes are estimated by examining the ratios of emission lifetimes to absolute quantum yields and also measured directly by ultrafast luminescence upconversion experiments. We find excellent agreement between these classes of experiments. This scheme enables us to tune spontaneous emission lifetimes by three orders of magnitude from ∼15 ns to over ∼7 µs, which is unprecedented in existing lumophores.

Oriented Attachment: From Natural Crystal Growth to a Materials Engineering Tool

ConspectusIntuitively, chemists see crystals grow atom-by-atom or molecule-by-molecule, very much like a mason builds a wall, brick by brick. It is much more difficult to grasp that small crystals can meet each other in a liquid or at an interface, start to align their crystal lattices and then grow together to form one single crystal. In analogy, that looks more like prefab building. Yet, this is what happens in many occasions and can, with reason, be considered as an alternative mechanism of crystal growth. Oriented attachment is the process in which crystalline colloidal particles align their atomic lattices and grow together into a single crystal. Hence, two aligned crystals become one larger crystal by epitaxy of two specific facets, one of each crystal. If we simply consider the system of two crystals, the unifying attachment reduces the surface energy and results in an overall lower (free) energy of the system. Oriented attachment often occurs with massive numbers of crystals dispersed in a liquid phase, a sol or crystal suspension. In that case, oriented attachment lowers the total free energy of the crystal suspension, predominantly by removal of the nanocrystal/liquid interface area. Accordingly, we should start by considering colloidal suspensions with crystals as the dispersed phase, i.e., "sols", and discuss the reasons for their thermodynamic (meta)stability and how this stability can be lowered such that oriented attachment can occur as a spontaneous thermodynamic process. Oriented attachment is a process observed both for charge-stabilized crystals in polar solvents and for ligand capped nanocrystal suspensions in nonpolar solvents. In this last system different facets can develop a very different reactivity for oriented attachment. Due to this facet selectivity, crystalline structures with very specific geometries can be grown in one, two, or three dimensions; controlled oriented attachment suddenly becomes a tool for material scientists to grow architectures that cannot be reached by any other means. We will review the work performed with PbSe and CdSe nanocrystals. The entire process, i.e., the assembly of nanocrystals, atomic alignment, and unification by attachment, is a very complex and intriguing process. Researchers have succeeded in monitoring these different steps with in situ wave scattering methods and real-space (S)TEM studies. At the same time coarse-grained molecular dynamics simulations have been used to further study the forces involved in self-assembly and attachment at an interface. We will briefly come back to some of these results in the last sections of this review.

Synthesis, Bottom up Assembly and Thermoelectric Properties of Sb-Doped PbS Nanocrystal Building Blocks

The precise engineering of thermoelectric materials using nanocrystals as their building blocks has proven to be an excellent strategy to increase energy conversion efficiency. Here we present a synthetic route to produce Sb-doped PbS colloidal nanoparticles. These nanoparticles are then consolidated into nanocrystalline PbS:Sb using spark plasma sintering. We demonstrate that the introduction of Sb significantly influences the size, geometry, crystal lattice and especially the carrier concentration of PbS. The increase of charge carrier concentration achieved with the introduction of Sb translates into an increase of the electrical and thermal conductivities and a decrease of the Seebeck coefficient. Overall, PbS:Sb nanomaterial were characterized by two-fold higher thermoelectric figures of merit than undoped PbS.

Scalable PbS Quantum Dot Solar Cell Production by Blade Coating from Stable Inks

The recent development of phase transfer ligand exchange methods for PbS quantum dots (QD) has enhanced the performance of quantum dots solar cells and greatly simplified the complexity of film deposition. However, the dispersions of PbS QDs (inks) used for film fabrication often suffer from colloidal instability, which hinders large-scale solar cell production. In addition, the wasteful spin-coating method is still the main technique for the deposition of QD layer in solar cells. Here, we report a strategy for scalable solar cell fabrication from highly stable PbS QD inks. By dispersing PbS QDs capped with CH3NH3PbI3 in 2,6-difluoropyridine (DFP), we obtained inks that are colloidally stable for more than 3 months. Furthermore, we demonstrated that DFP yields stable dispersions even of large diameter PbS QDs, which are of great practical relevance owing to the extended coverage of the near-infrared region. The optimization of blade-coating deposition of DFP-based inks enabled the fabrication of PbS QD solar cells with power conversion efficiencies of up to 8.7%. It is important to underline that this performance is commensurate with the devices made by spin coating of inks with the same ligands. A good shelf life-time of these inks manifests itself in the comparatively high photovoltaic efficiency of 5.8% obtained with inks stored for more than 120 days.

Luminescent Quantum Dots Stabilized by N-Heterocyclic Carbene Polymer Ligands

We have tested the ability of N-heterocyclic carbene (NHC)-modified ligands to coordinate and stabilize luminescent CdSe-ZnS core-shell quantum dot (QD) dispersions in hydrophilic media. In particular, we probed the effects of ligand structure and coordination number on the coating affinity to the nanocrystals. We find that such NHC-based ligands rapidly coordinate onto the QDs (requiring ∼5-10 min of reaction time), which reflects the soft Lewis base nature of the NHC groups, with its two electrons sharing capacity. Removal of the hydrophobic cap and promotion of carbene-driven coordination on the nanocrystals have been verified by ¹H NMR spectroscopy, while ¹³C NMR was used to identify the formation of carbene-Zn complexes. The newly coated QD dispersions exhibit great long-term colloidal stability over a wide range of conditions. Additionally, we find that coordination onto the QD surfaces affects the optical and spectroscopic properties of the nanocrystals. These include a size-dependent red-shift of the absorption and fluorescence spectra and a pronounced increase in the measured fluorescence intensity when the samples are stored under white light exposure compared to those stored in the dark.

Interplay between Chemical Transformations and Atomic Structure in Nanocrystals and Nanoclusters

ConspectusChemically induced transformations are postsynthetic processing reactions applied to first generation (as-synthesized) nanomaterials to modify property-defining factors such as atomic structure, chemical composition, surface chemistry, and/or morphology. Compared with conditions for direct synthesis of colloidal nanocrystals, postsynthetic chemical transformations can be conducted in relatively mild conditions with a more controllable process, which makes them suitable for the precise manipulation of nanomaterials and for trapping metastable phases that are typically inaccessible from the conventional synthetic routes. Each of the chemically induced transformations methods can result in substantial restructuring of the atomic structure, but their transformation pathways can be very different. And the converse is also true: the atomic structure of the parent material plays a large role in the pathway toward and the resulting chemically transformed product. Additionally, the characteristic length of the parent material greatly affects the structure, which affects the outcome of the reaction.In this Account, we show how the atomic structure and nanoscale size directs the product formation into materials that are inaccessible from analogous chemically transformations in bulk materials. Through examples from the three chemical transformation processes (cation/anion exchange, redox reactions, and ligand exchange and ligand etching), the effect of the atomic structure on chemical transformations is made apparent, and vice versa. For cation exchange, an anisotropic atomic lattice results in a unidirectional exchange boundary. And because the interface can extend through the full crystal, a substantial strain field can form, influencing the phase of the material. In the redox reaction that leads to the nanoscale Kirkendall effect, the atomic structure is the key to inverting the diffusion rates in a diffusion couple to form the hollow cores. And for ligand etching, if one of the materials in a heterostructure has a defected and\or defect-tolerant atomic structure, it can be preferentially etched and its atomic structure can undergo phase transformations while the other composition remains intact. For length scales, we show how the chemically induced transformations greatly differ between bulk, nanocrystal, and nanocluster characteristic sizes. For instance, the structural transformation on relatively large nanocrystals (2-100 nm) can be a continuous process when the activation volume is smaller than the nanocrystal, while for smaller nanoclusters (<2 nm) the transformation kinetics could be swift resulting in only discrete thermodynamic states. Comparing the two nanosystems (nanocrystals to small nanoclusters), we address how their atomic structural differences can direct the divergent transformation phenomena and the corresponding mechanisms. Understanding the nanoscale mechanisms of chemically induced transformations and how they differ from bulk processes is key to unlocking new science and for implementing this processing for functional materials.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Colloidal BaZrS3 chalcogenide perovskite nanocrystals for thin film device fabrication

The theoretical optoelectronic properties of chalcogenide perovskites (e.g., BaZrS3) are as good as those of halide perovskites (e.g., CH3NH3PbI3). But the fabrication of optoelectronic devices is rarely reported, mainly because researchers still do not know how to prepare good quality thin films of chalcogenide perovskites. Here, we report colloidal BaZrS3 nanocrystals (NCs, 40-60 nm) and their solution processed thin film transistors. BaZrS3 NCs are first prepared using a solid-state synthesis route, and the subsequent surface modifications lead to a colloidal dispersion of NCs in both polar N-methyl-2-pyrrolidinone and non-polar chloroform solvents. The NCs exhibit good thermal (15-673 K) and aqueous stability. Colloidal BaZrS3 NCs in chloroform are then used to make field effect transistors showing ambipolar properties with a hole mobility of 0.059 cm2 V-1 s-1 and an electron mobility of 0.017 cm2 V-1 s-1. This report of solution processed chalcogenide perovskite thin films with reasonable carrier mobility and optical absorption and emission is expected to pave the way for future optoelectronic devices of chalcogenide perovskites.

Processing-Structure-Performance Relationships of Microporous Metal-Organic Polymers for Size-Selective Separations

Small-molecule impurities, such as N-nitrosodimethylamine (NDMA), have infiltrated the generic drug industry, leading to recalls in commonly prescribed blood pressure and stomach drugs in over 43 countries since 2018 and directly affecting tens of millions of patients. One promising strategy to remove small-molecule impurities like NDMA from drug molecules is by size exclusion, in which the contaminant is removed by selective adsorption onto a (micro)porous material due to its smaller size. However, current solution-phase size-exclusion separations are primarily limited by the throughput-selectivity trade-off. Here, we report a bioinspired solution to conquer these critical challenges by leveraging the assembly of atomically precise building blocks into hierarchically porous structures. We introduce a bottom-up approach to form micropores, mesopores, and macroscopic superstructures simultaneously using functionalized oxozirconium clusters as building blocks. Further, we leverage recent advances in photopolymerization to design macroscopic flow structures to mitigate backpressure. Based on these multiscale design principles, we engineer simple, inexpensive devices that are able to separate NDMA from contaminated drugs. Beyond this urgent model system, we expect this design strategy to open up hitherto unexplored avenues of nanomaterial superstructure fabrication for a range of size-exclusion purification strategies.

Quantitative Electrochemical Control over Optical Gain in Quantum-Dot Solids

Solution-processed quantum dot (QD) lasers are one of the holy grails of nanoscience. They are not yet commercialized because the lasing threshold is too high: one needs >1 exciton per QD, which is difficult to achieve because of fast nonradiative Auger recombination. The threshold can, however, be reduced by electronic doping of the QDs, which decreases the absorption near the band-edge, such that the stimulated emission (SE) can easily outcompete absorption. Here, we show that by electrochemically doping films of CdSe/CdS/ZnS QDs, we achieve quantitative control over the gain threshold. We obtain stable and reversible doping of more than two electrons per QD. We quantify the gain threshold and the charge carrier dynamics using ultrafast spectroelectrochemistry and achieve quantitative agreement between experiments and theory, including a vanishingly low gain threshold for doubly doped QDs. Over a range of wavelengths with appreciable gain coefficients, the gain thresholds reach record-low values of ∼1 × 10-5 excitons per QD. These results demonstrate a high level of control over the gain threshold in doped QD solids, opening a new route for the creation of cheap, solution-processable, low-threshold QD lasers.

Photostability enhancement of InP/ZnSe/ZnSeS/ZnS quantum dots by plasmonic nanostructures

The effect of gold and silver plasmonic films on the photoluminescence and photostability of InP/ZnSe/ZnSeS/ZnS nanocrystals (quantum dots) is reported. Colloidal gold films promote the photostability enhancement of InP/ZnSe/ZnSeS/ZnS quantum dots (more durable emission properties in the presence of metal nanostructures) through reducing exciton lifetime. In contrast, silver decreases the photostability of InP/ZnSe/ZnSeS/ZnS quantum dots without changing the photoluminescence intensity and kinetics. By adjusting the excitation wavelength closer to the extinction band of gold nanoparticles a 1.8-fold enhancement of luminescence intensity has been obtained using a polyelectrolyte spacer between the metal and InP/ZnSe/ZnSeS/ZnS nanoparticles. Thus, plasmonics offers essential practical improvement of light emitters in terms of their durable luminescent properties upon prolonged optical excitation without losses in luminescence efficiency or even along with increased efficiency.

Molecular-Level Insight into Semiconductor Nanocrystal Surfaces

Semiconductor nanocrystals exhibit attractive photophysical properties for use in a variety of applications. Advancing the efficiency of nanocrystal-based devices requires a deep understanding of the physical defects and electronic states that trap charge carriers. Many of these states reside at the nanocrystal surface, which acts as an interface between the semiconductor lattice and the molecular capping ligands. While a detailed structural and electronic understanding of the surface is required to optimize nanocrystal properties, these materials are at a technical disadvantage: unlike molecular structures, semiconductor nanocrystals lack a specific chemical formula and generally must be characterized as heterogeneous ensembles. Therefore, in order for the field to improve current nanocrystal-based technologies, a creative approach to gaining a "molecular-level" picture of nanocrystal surfaces is required. To this end, an expansive toolbox of experimental and computational techniques has emerged in recent years. In this Perspective, we critically evaluate the insight into surface structure and reactivity that can be gained from each of these techniques and demonstrate how their strategic combination is already advancing our molecular-level understanding of nanocrystal surface chemistry.

Polarized emission of CdSe nanocrystals in magnetic field: the role of phonon-assisted recombination of the dark exciton

The recombination dynamics and spin polarization of excitons in CdSe nanocrystals synthesized in a glass matrix are investigated using polarized photoluminescence in high magnetic fields up to 30 Tesla. The dynamics are accelerated by increasing temperature and magnetic field, confirming the dark exciton nature of low-temperature photoluminescence (PL). The circularly polarized PL in magnetic fields reveals several unusual appearances: (i) a spectral dependence of the polarization degree, (ii) its low saturation value, and (iii) a stronger intensity of the Zeeman component which is higher in energy. The latter feature is the most surprising being in contradiction with the thermal population of the exciton spin sublevels. The same contradiction was previously observed in the ensemble of wet-chemically synthesized CdSe nanocrystals but was not understood. We present a theory which explains all the observed features and shows that the inverted ordering of the circularly polarized PL maxima from the ensemble of nanocrystals is a result of competition between the zero phonon (ZPL) and one optical phonon-assisted (1PL) emission of the dark excitons. The essential aspects of the theoretical model are different polarization properties of the dark exciton emission via ZPL and 1PL recombination channels and the inhomogeneous broadening of the PL spectrum from the ensemble of nanocrystals exceeding the optical phonon energy.

Electron and Hole Spin Relaxation in CdSe Colloidal Nanoplatelets

Solution-processed quantum-confined nanocrystals are important building blocks for scalable implementation of quantum information science. Extensive studies on colloidal quantum dots (QDs) have revealed subpicosecond hole spin relaxation, whereas the electron spin dynamics remains difficult to probe. Here we study electron and hole spin dynamics in CdSe colloidal nanoplatelets (also called quantum wells) of varying thicknesses using circularly polarized transient absorption spectroscopy at room temperature. The clear spectroscopic features of transition bands associated with heavy, light, and spin-orbit split-off holes enabled separate probes of electron and hole dynamics. The hole spin-flip occurred within ∼200 fs, arising from strong spin-orbit coupling in the valence band. The electron spin lifetime decreased from 6.2 to 2.2 ps as the platelet thickness is reduced from 6 to 4 monolayers, reflecting an exchange interaction between the electron and the hole and/or surface dangling bond spins enhanced by quantum confinement.

A high-temperature continuous stirred-tank reactor cascade for the multistep synthesis of InP/ZnS quantum dots

Multistep and continuous production of core–shell InP/ZnS semiconductor nanocrystals in a high-temperature and miniature continuous stirred-tank reactor cascade.

Heterogeneity induced dual luminescence properties of AgInS2 and AgInS2–ZnS alloyed nanocrystals

In the PL spectra of heterogeneous nanocrystals (In₂S₃–AgInS₂ and In₂S₃–AgInS₂–ZnS) two distinctly different peaks could be found at 430 and 710–515 nm.

Diagnostic and Therapeutic Nanomedicine

Nanotechnology has been widely applied to medical interventions for prevention, diagnostics, and therapeutics of diseases, and the application of nanotechnology for medical purposes, which is called as a term "nanomedicine" has received tremendous attention. In particular, the design and development of nanoparticle for biosensors have received a great deal of attention, since those are most impactful area of clinical translation showing potential breakthrough in early diagnosis of diseases such as cancers and infections. For example, the nanoparticles that have intrinsic unique features such as magnetic responsive characteristics or photoluminescence can be utilized for noninvasive visualization of inner body. Drug delivery that makes use of drug-containing nanoparticles as a carrier is another field of study, in which the particulate form nanomedicine is given by parenteral administration for further systemic targeting to pathological tissues. In addition, encapsulation into nanoparticles gives the opportunity to secure the sensitive therapeutic payloads that are readily degraded or deactivated until reached to the target in biological environments, or to provide sufficient solubilization (e.g., to deliver compounds which have physicochemical properties that strongly limit their aqueous solubility and therefore systemic bioavailability). The nanomedicine is further intended to enhance the targeting index such as increased specificity and reduced false binding, thus improve the diagnostic and therapeutic performances. In this chapter, principles of nanomaterials for medicine will be thoroughly covered with applications for imaging-based diagnostics and therapeutics.

YAG:Ce3+ Phosphor: From Micron-Sized Workhorse for General Lighting to a Bright Future on the Nanoscale

The renowned yellow phosphor yttrium aluminum garnet (YAG) doped with trivalent cerium has found its way into applications in many forms: as powder of micron sized crystals, as a ceramic, and even as a single crystal. However, additional technological advancement requires providing this material in new form factors, especially in terms of particle size. Where many materials have been developed on the nanoscale with excellent optical properties (e.g., semiconductor quantum dots, perovskite nanocrystals, and rare earth doped phosphors), it is surprising that the development of nanocrystalline YAG:Ce is not as mature as for these other materials. Control over size and shape is still in its infancy, and optical properties are not yet at the same level as other materials on the nanoscale, even though YAG:Ce microcrystalline materials exceed the performance of most other materials. This review highlights developments in synthesis methods and mechanisms and gives an overview of the state of the art morphologies, particle sizes, and optical properties of YAG:Ce on the nanoscale.

Disordered Mott-Hubbard Physics in Nanoparticle Solids: Transitions Driven by Disorder, Interactions, and Their Interplay

We show that adapting the knowledge developed for the disordered Mott-Hubbard model to nanoparticle (NP) solids can deliver many very helpful new insights. We developed a hierarchical nanoparticle transport simulator (HINTS), which builds from localized states to describe the disorder-localized and Mott-localized phases of NP solids and the transitions out of these localized phases. We also studied the interplay between correlations and disorder in the corresponding multiorbital Hubbard model at and away from integer filling by dynamical mean field theory. This DMFT approach is complementary to HINTS, as it builds from the metallic phase of the NP solid. The mobility scenarios produced by the two methods are strikingly similar and account for the mobilities measured in NP solids. We conclude this work by constructing the comprehensive phase diagram of PbSe NP solids on the disorder-filling plane.

Tuning the Radiative Lifetime in InP Colloidal Quantum Dots by Controlling the Surface Stoichiometry

InP nanocrystals exhibit a low photoluminescence quantum yield. As in the case of CdS, this is commonly attributed to their poor surface quality and difficult passivation, which give rise to trap states and negatively affect emission. Hence, the strategies adopted to improve their quantum yield have focused on the growth of shells, to improve passivation and get rid of the surface states. Here, we employ state-of-the-art atomistic semiempirical pseudopotential modeling to isolate the effect of surface stoichiometry from features due to the presence of surface trap states and show that, even with an atomistically perfect surface and an ideal passivation, InP nanostructures may still exhibit very long radiative lifetimes (on the order of tens of microseconds), broad and weak emission, and large Stokes' shifts. Furthermore, we find that all these quantities can be varied by orders of magnitude, by simply manipulating the surface composition, and, in particular, the number of surface P atoms. As a consequence it should be possible to substantially increase the quantum yield in these nanostructures by controlling their surface stoichiometry.

The role of ligands in electron transport in nanocrystal solids

We investigate theoretically the transport of electrons and holes in crystalline solids consisting of three-dimensional arrays of semiconductor nanocrystals passivated by two types of organic ligands-linear chain carboxylates and functionalized aromatic cinnamates. We focus on a critical quantity in transport: the quantum-mechanical overlap of the strongly confined electron and hole wavefunctions on neighboring nanocrystals. Using results from density-functional-theory (DFT) calculations, we construct a one-dimensional model system whose analytic wavefunctions reproduce the full DFT numerical overlap values. By investigating the analytic behavior of this model, we reveal several important features of electron transport. The most significant is that the wavefunction overlap decays exponentially with ligand length, with a characteristic decay length that depends primarily on properties of the ligand and is almost independent of the size and type of nanocrystal. Functionalization of the ligands can also affect the overlap by changing the height of the tunneling barrier. The physically transparent analytic expressions we obtain for the wavefunction overlap and its decay length should be useful for future efforts to control transport in nanocrystal solids.

On the Colloidal Stability of PbS Quantum Dots Capped with Methylammonium Lead Iodide Ligands

Phase-transfer exchange of pristine organic ligands for inorganic ones is essential for the integration of colloidal quantum dots (CQDs) in optoelectronic devices. This method results in a colloidal dispersion (ink) which can be directly deposited by various solution-processable techniques to fabricate conductive films. For PbS CQDs capped with methylammonium lead iodide ligands (MAPbI₃), the most commonly employed solvent is butylamine, which enables only a short-term (hours) colloidal stability and thus brings concerns on the possibility of manufacturing CQD devices on a large scale in a reproducible manner. In this work, we studied the stability of alternative inks in two highly polar solvents which impart long-term colloidal stability of CQDs: propylene carbonate (PC) and 2,6-difluoropyridine (DFP). The aging and the loss of the ink's stability were monitored with optical, structural, and transport measurements. With these solvents, PbS CQDs capped with MAPbI₃ ligands retain colloidal stability for more than 20 months, both in dilute and concentrated dispersions. After 17 months of ink storage, transistors with a maximum linear mobility for electrons of 8.5 × 10^-3 cm²/V s are fabricated; this value is 17% of the one obtained with fresh solutions. Our results show that both PC- and DFP-based PbS CQD inks offer the needed shelf life to allow for the development of a CQD device technology.

Fast Neutron Imaging with Semiconductor Nanocrystal Scintillators

Fast neutrons offer high penetration capabilities for both light and dense materials due to their comparatively low interaction cross sections, making them ideal for the imaging of large-scale objects such as large fossils or as-built plane turbines, for which X-rays or thermal neutrons do not provide sufficient penetration. However, inefficient fast neutron detection limits widespread application of this technique. Traditional phosphors such as ZnS:Cu embedded in plastics are utilized as scintillators in recoil proton detectors for fast neutron imaging. However, these scintillation plates exhibit significant light scattering due to the plastic-phosphor interface along with long-lived afterglow (on the order of minutes), and therefore alternative solutions are needed to increase the availability of this technique. Here, we utilize colloidal nanocrystals (NCs) in hydrogen-dense solvents for fast neutron imaging through the detection of recoil protons generated by neutron scattering, demonstrating the efficacy of nanomaterials as scintillators in this detection scheme. The light yield, spatial resolution, and neutron-vs-gamma sensitivity of several chalcogenide (CdSe and CuInS₂)-based and perovskite halide-based NCs are determined, with only a short-lived afterglow (below the order of seconds) observed for all of these NCs. FAPbBr₃ NCs exhibit the brightest total light output at 19.3% of the commercial ZnS:Cu(PP) standard, while CsPbBrCl₂:Mn NCs offer the best spatial resolution at ∼2.6 mm. Colloidal NCs showed significantly lower gamma sensitivity than ZnS:Cu; for example, 79% of the FAPbBr₃ light yield results from neutron-induced radioluminescence and hence the neutron-specific light yield of FAPbBr₃ is 30.4% of that of ZnS:Cu(PP). Concentration and thickness-dependent measurements highlight the importance of increasing concentrations and reducing self-absorption, yielding design principles to optimize and foster an era of NC-based scintillators for fast neutron imaging.

Solid-State NMR and NQR Spectroscopy of Lead-Halide Perovskite Materials

Two- and three-dimensional lead-halide perovskite (LHP) materials are novel semiconductors that have generated broad interest owing to their outstanding optical and electronic properties. Characterization and understanding of their atomic structure and structure-property relationships are often nontrivial as a result of the vast structural and compositional tunability of LHPs as well as the enhanced structure dynamics as compared with oxide perovskites or more conventional semiconductors. Nuclear magnetic resonance (NMR) spectroscopy contributes to this thrust through its unique capability of sampling chemical bonding element-specifically (1/2H, 13C, 14/15N, 35/37Cl, 39K, 79/81Br, 87Rb, 127I, 133Cs, and 207Pb nuclei) and locally and shedding light onto the connectivity, geometry, topology, and dynamics of bonding. NMR can therefore readily observe phase transitions, evaluate phase purity and compositional and structural disorder, and probe molecular dynamics and ionic motion in diverse forms of LHPs, in which they can be used practically, ranging from bulk single crystals (e.g., in gamma and X-ray detectors) to polycrystalline films (e.g., in photovoltaics, photodetectors, and light-emitting diodes) and colloidal nanocrystals (e.g., in liquid crystal displays and future quantum light sources). Herein we also outline the immense practical potential of nuclear quadrupolar resonance (NQR) spectroscopy for characterizing LHPs, owing to the strong quadrupole moments, good sensitivity, and high natural abundance of several halide nuclei (79/81Br and 127I) combined with the enhanced electric field gradients around these nuclei existing in LHPs as well as the instrumental simplicity. Strong quadrupole interactions, on one side, make 79/81Br and 127I NMR rather impractical but turn NQR into a high-resolution probe of the local structure around halide ions.

Effect of Ligand Adsorption on the Electronic Properties of the PbS(100) Surface

A first-principles density functional theory calculation was carried out to study the adsorption of acetic acid, methyl amine, methanethiol, and hydrogen iodide on the (100) surface of PbS. All four ligands are common capping agents used in colloidal PbS quantum dot-based photovoltaics. Interestingly, among the considered adsorbates, dissociative adsorption was energetically preferred for hydrogen iodide, while associative adsorption was favorable for the rest. Associative adsorption was driven by strong interactions between the electronegative elements (Y) in the respective ligands and the Pb surface atoms via Pb 6p-Y np bond hybridization (n represents the valence quantum number of the respective electronegative elements). Importantly, the adsorption of ligands altered the work function of PbS, with contrasting trends for associative (decrease in the work function) versus dissociative (increase in the work function) adsorption. The changes in the work function correlates well with a corresponding shift in the 5d level of surface Pb atoms. Other important observations include variations in the work function that linearly change with increasing the surface coverage of adsorbed ligands as well as with the strength of the adsorption of ligands.

Manipulating Electronic Structure from the Bottom-Up: Colloidal Nanocrystal-Based Semiconductors

Semiconductors assembled from colloidal nanocrystals (NCs) are often described in the same terms as their single-crystalline counterparts with references to conduction and valence band edges, doping densities, and electronic defects; however, how and why semiconductor properties manifest in these bottom-up fabricated thin films can be fundamentally different. In this Perspective, we describe the factors that determine the electronic structure in colloidal NC-based semiconductors, and comment on approaches for measuring or calculating this electronic structure. Finally, we discuss future directions for these semiconductors and highlight their potential to bridge the divide between localized quantum effects and long-range transport in thin films.

Metal Halide Perovskite Nanorods: Shape Matters

Quasi-1D metal halide perovskite nanorods (NRs) are emerging as a type of materials with remarkable optical and electronic properties. Research into this field is rapidly expanding and growing in the past several years, with significant advances in both mechanistic studies of their growth and widespread possible applications. Here, the recent advances in 1D metal halide perovskite nanocrystals (NCs) are reviewed, with a particular emphasis on NRs. At first, the crystal structures of perovskites are elaborated, which is followed by a review of the major synthetic approaches toward perovskite NRs, such as wet-chemical synthesis, substrate-assisted growth, and anion exchange reactions, and discussion of the growth mechanisms associated with each synthetic method. Then, thermal and aqueous stability and the linear polarized luminescence of perovskite NRs are considered, followed by highlighting their applications in solar cells, light-emitting diodes, photodetectors/phototransistors, and lasers. Finally, challenges and future opportunities in this rapidly developing research area are summarized.

From Single-Core Nanoparticles in Ferrofluids to Multi-Core Magnetic Nanocomposites: Assembly Strategies, Structure, and Magnetic Behavior

Iron oxide nanoparticles are the basic components of the most promising magnetoresponsive nanoparticle systems for medical (diagnosis and therapy) and bio-related applications. Multi-core iron oxide nanoparticles with a high magnetic moment and well-defined size, shape, and functional coating are designed to fulfill the specific requirements of various biomedical applications, such as contrast agents, heating mediators, drug targeting, or magnetic bioseparation. This review article summarizes recent results in manufacturing multi-core magnetic nanoparticle (MNP) systems emphasizing the synthesis procedures, starting from ferrofluids (with single-core MNPs) as primary materials in various assembly methods to obtain multi-core magnetic particles. The synthesis and functionalization will be followed by the results of advanced physicochemical, structural, and magnetic characterization of multi-core particles, as well as single- and multi-core particle size distribution, morphology, internal structure, agglomerate formation processes, and constant and variable field magnetic properties. The review provides a comprehensive insight into the controlled synthesis and advanced structural and magnetic characterization of multi-core magnetic composites envisaged for nanomedicine and biotechnology.

Stereoselective C-C Oxidative Coupling Reactions Photocatalyzed by Zwitterionic Ligand Capped CsPbBr3 Perovskite Quantum Dots

Semiconductor quantum dots (QDs) have attracted tremendous attention in the field of photocatalysis, owing to their superior optoelectronic properties for photocatalytic reactions, including high absorption coefficients and long photogenerated carrier lifetimes. Herein, by choosing 2-(3,4-dimethoxyphenyl)-3-oxobutanenitrile as a model substrate, we demonstrate that the stereoselective (>99 %) C-C oxidative coupling reaction can be realized with a high product yield (99 %) using zwitterionic ligand capped CsPbBr₃ perovskite QDs under visible light illumination. The reaction can be generalized to different starting materials with various substituents on the phenyl ring and varied functional moieties, producing stereoselective dl-isomers. A radical mediated reaction pathway has been proposed. Our study provides a new way of stereoselective C-C oxidative coupling via a photocatalytic means using specially designed perovskite QDs.