The structure of nanotubes formed by diphenylalanine, the core recognition motif of Alzheimer's β-amyloid polypeptide

Morphology and Pattern Control of Diphenylalanine Self-Assembly via Evaporative Dewetting

Self-assembled peptide nanostructures have unique physical and biological properties and promising applications in electrical devices and functional molecular recognition. Although solution-based peptide molecules can self-assemble into different morphologies, it is challenging to control the self-assembly process. Herein, controllable self-assembly of diphenylalanine (FF) in an evaporative dewetting solution is reported. The fluid mechanical dimensionless numbers, namely Rayleigh, Marangoni, and capillary numbers, are introduced to control the interaction between the solution and FF molecules in the self-assembly process. The difference in the film thickness reflects the effects of Rayleigh and Marangoni convection, and the water vapor flow rate reveals the role of viscous fingering in the emergence of aligned FF flakes. By employing dewetting, various FF self-assembled patterns, like concentric and spokelike, and morphologies, like strips and hexagonal tubes/rods, can be produced, and there are no significant lattice structural changes in the FF nanostructures.

A terminally protected dipeptide: from crystal structure and self-assembly, through co-assembly with carbon-based materials, to a ternary catalyst for reduction chemistry in water

A terminally protected, hydrophobic dipeptide Boc-L-Cys(Me)-L-Leu-OMe (1) was synthesized and its 3D-structure was determined by single crystal X-ray diffraction analysis. This peptide is able to hierarchically self-assemble in a variety of superstructures, including hollow rods, ranging from the nano- to the macroscale, and organogels. In addition, 1 is able to drive fullerene (C60) or multiwalled carbon nanotubes (MWCNTs) in an organogel by co-assembling with them. A hybrid 1-C60–MWCNT organogel was prepared and converted (through a high vacuum-drying process) into a robust, high-volume, water insoluble, solid material where C60 is well dispersed over the entire superstructure. This ternary material was successfully tested as a catalyst for: (i) the reduction reaction of water-soluble azo compounds mediated by NaBH4 and UV-light with an overall performance remarkably better than that provided by C60 alone, and (ii) the NaBH4-mediated reduction of benzoic acid to benzyl alcohol. Our results suggest that the self-assembly properties of 1 might be related to the occurrence in its single crystal structure of a sixfold screw axis, a feature shared by most of the linear peptides known so far to give rise to nanotubes.

The self-assembly mechanism of tetra-peptides from the motif of β-amyloid peptides: a combined coarse-grained and all-atom molecular dynamics simulation

Understanding the self-assembly mechanisms of tetra-peptides from Aβ-peptides into different nanostructures.

Bioinspired diphenylalanine with aggregation-induced emission in deep ultraviolet range

Diphenylalanine showing aggregation-induced emission (AIE) at 282 nm is demonstrated. The luminescent intensity increases rapidly with the occurrence of aggregation. Time-resolved and temperature-dependent PL spectra are used to interpret the AIE effect.

Photo-responsive modulation of hybrid peptide assembly, charge transfer complex formation and gelation

Light has been used as trigger for modulation of supramolecular assembly of hybrid peptides followed by charge transfer complex formation and organogelation.

Conformation and Aggregation of LKα14 Peptide in Bulk Water and at the Air/Water Interface

Historically, the protein folding problem has mainly been associated with understanding the relationship between amino acid sequence and structure. However, it is known that both the conformation of individual molecules and their aggregation strongly depend on the environmental conditions. Here, we study the aggregation behavior of the model peptide LKα14 (with amino acid sequence LKKLLKLLKKLLKL) in bulk water and at the air/water interface. We start by a quantitative analysis of the conformational space of a single LKα14 in bulk water. Next, in order to analyze the aggregation tendency of LKα14, by using the umbrella sampling technique we calculate the potential of mean force for pulling a single peptide from an n-molecule aggregate. In agreement with the experimental results, our calculations yield the optimal aggregate size as four. This equilibrium state is achieved by two opposing forces: Coulomb repulsion between the lysine side chains and the reduction of solvent accessible hydrophobic surface area upon aggregation. At the vacuum/water interface, however, even dimers of LKα14 become marginally stable, and any larger aggregate falls apart instantaneously. Our results indicate that even though the interface is highly influential in stabilizing the α-helix conformation for a single molecule, it significantly reduces the attraction between two LKα14 peptides, along with their aggregation tendency.

Functional architectures based on self-assembly of bio-inspired dipeptides: Structure modulation and its photoelectronic applications

Getting inspiration from nature and further developing functional architectures provides an effective way to design innovative materials and systems. Among bio-inspired materials, dipeptides and its self-assembled architectures with functionalities have recently been the subject of intensive studies. However, there is still a great challenge to explore its applications likely due to the lack of effective adaptation of their self-assembled structures as well as a lack of understanding of the self-assembly mechanisms. In this context, taking diphenylalanine (FF, a core recognition motif for molecular self-assembly of the Alzheimer's β-amyloid polypeptides) as a model of bio-inspired dipeptides, recent strategies on modulation of dipeptide-based architectures were introduced with regard to both covalent (architectures modulation by coupling functional groups) and non-covalent ways (controlled architectures by different assembly pathways). Then, applications are highlighted in some newly emerging fields of innovative photoelectronic devices and materials, such as artificial photosynthetic systems for renewable solar energy storage and renewable optical waveguiding materials for optoelectronic devices. At last, the challenges and future perspectives of these bio-inspired dipeptides are also addressed.

Effective Synergistic Effect of Dipeptide-Polyoxometalate-Graphene Oxide Ternary Hybrid Materials on Peroxidase-like Mimics with Enhanced Performance

Dipeptide-polyoxometalates (POMs)-graphene oxide (GO) ternary hybrid is an excellent peroxidase-like mimic, exhibiting enhanced peroxidase-like activity compared to POMs alone. The hybrid was readily prepared through a reprecipitation method involving electrostatic encapsulation of H3PW12O40 (PW12) by cationic diphenylalanine (FF) peptide and coassembly of FF@PW12 spheres with graphene oxide (GO). Using 3,3',5,5'-tetramethylbenzidine (TMB) as the chromogenic substrate, the peroxidase-like activity of FF@PW12 was evaluated in the heterogeneous phase, and it is 13 times higher than that of pristine PW12 in the homogeneous phase. Furthermore, ternary hybrids of FF@PW12@GO containing 5 wt % GO could enhance the activity 1.7 times higher than that of FF@PW12. The noncovalent interactions of hydrogen bonding and ionic interaction between GO and POMs are speculated to result in the synergistic effect for the enhancement of peroxidase-like performance. The strong interactions between rGO and PW12 are evaluated by a four-probe Hall measurement via the van der Pauw method, and rGO is significantly p-doped by the doping effect of PW12 with lower LUMO energy than that of the energy level of rGO and also due to the electron reservoir feature of PW12. Cyclic voltammogram measurements also suggest that GO causes significant influence on the electronic structure of the reduced forms of the redox couples of PW12. The nature of the TMB catalytic reaction may originate from the generation of the hydroxyl radical ((•)OH) from the decomposition of H2O2 by ternary hybrids and the formation of peroxo species of POM. Taking advantage of the UV-vis signals of TMB being correlated to the concentration of H2O2, FF@PW12@GO can be used to detect H2O2 within the limit of detection of 0.11 μM, and the detection range is 1-75 μM. The present method indeed opens up a promising route in constructing heterogeneous peroxidase-like mimics through the use of POMs via the introduction of GO for building H2O2 sensors.

Beta-Sheet-Forming, Self-Assembled Peptide Nanomaterials towards Optical, Energy, and Healthcare Applications

Peptide self-assembly is an attractive route for the synthesis of intricate organic nanostructures that possess remarkable structural variety and biocompatibility. Recent studies on peptide-based, self-assembled materials have expanded beyond the construction of high-order architectures; they are now reporting new functional materials that have application in the emerging fields such as artificial photosynthesis and rechargeable batteries. Nevertheless, there have been few reviews particularly concentrating on such versatile, emerging applications. Herein, recent advances in the synthesis of self-assembled peptide nanomaterials (e.g., cross β-sheet-based amyloid nanostructures, peptide amphiphiles) are selectively reviewed and their new applications in diverse, interdisciplinary fields are described, ranging from optics and energy storage/conversion to healthcare. The applications of peptide-based self-assembled materials in unconventional fields are also highlighted, such as photoluminescent peptide nanostructures, artificial photosynthetic peptide nanomaterials, and lithium-ion battery components. The relation of such functional materials to the rapidly progressing biomedical applications of peptide self-assembly, which include biosensors/chips and regenerative medicine, are discussed. The combination of strategies shown in these applications would further promote the discovery of novel, functional, small materials.

Rational Design of Chiral Nanostructures from Self-Assembly of a Ferrocene-Modified Dipeptide

We report a new paradigm for the rational design of chiral nanostructures that is based on the hierarchical self-assembly of a ferrocene (Fc)-modified dipeptide, ferrocene-L-Phe-L-Phe-OH (Fc-FF). Compared to other chiral self-assembling systems, Fc-FF is unique because of its smaller size, biocompatibility, multiple functions (a redox center), and environmental responsiveness. X-ray and spectroscopic analyses showed that the incorporation of counterions during the hierarchical self-assembly of Fc-FF changed the conformations of the secondary structures from flat β sheets into twisted β sheets. This approach enables chiral self-assembly and the formation of well-defined chiral nanostructures composed of helical twisted β sheets. We identified two elementary forms for the helical twist of the β sheets, which allowed us to create a rich variety of rigid chiral nanostructures over a wide range of scales. Furthermore, through subtle modulations in the counterions, temperature, and solvent, we are able to precisely control the helical pitch, diameter, and handedness of the self-assembled chiral nanostructures. This unprecedented level of control not only offers insights into how rationally designed chiral nanostructures can be formed from simple molecular building blocks but also is of significant practical value for the use in chiroptics, templates, chiral sensing, and separations.

The physical properties of supramolecular peptide assemblies: from building block association to technological applications

Bio-inspired nano-materials can be formed by the ordered assembly of elementary building blocks using recognition modules and structural elements. Among the biological sources, peptides and proteins are of special interest due to their role as major structural elements in all living systems, ranging from bacteria to humans in a continuum of magnitudes, from the nano-scale to the macro-scale. Peptides, as short as dipeptides, contain all the molecular information needed to form well-ordered structures at the nano-scale. Here, in light of the significant advancements in the field of peptide nanostructures in the last few years, we provide an updated overview of this subject. The use of these nanostructures was indeed recently demonstrated in various fields including the design of molecular motors based on nanostructure complexation with a metal-organic framework, the delivery of therapeutic agents, the development of energy storage devices and the fabrication of piezoelectric-based sensors.

Controlled rod nanostructured assembly of diphenylalanine and their optical waveguide properties

Diphenylalanine (FF) microrods were obtained by manipulating the fabrication conditions. Fourier transform infrared (FTIR), circular dichroism (CD), fluorescence (FL) spectroscopy, and X-ray diffraction (XRD) measurements revealed the molecular arrangement within the FF microrods, demonstrating similar secondary structure and molecular arrangement within FF microtubes and nanofibers. Accordingly, a possible mechanism was proposed, which may provide important guidance on the design and assembly manipulation of peptides and other biomolecules. Furthermore, characterization of a single FF microrod indicates that the FF microrod can act as an active optical waveguide material, allowing locally excited photoluminescence to propagate along the length of the microrod with coupling out at the microrod tips.

Sonication-induced instant fibrillation and fluorescent labeling of tripeptide fibers

A sonication-induced instant fibril formation technique has been used for the co-assembly and fluorescent labeling of peptide nanofibers with organic dyes.

A multi-stimuli responsive, self-assembling, boronic acid dipeptide

Boronic acid-modified phenylalanine dipeptide reversibly assembles into nanoribbon gels, triggered through variations in pH, ionic strength, and unique polyol interactions.

Nanospheres from the self-assembly of an elastin-inspired triblock peptide

The self-assembly of an elastin-inspired triblock peptide into nanospheres highlights the important role of conformational flexibility and π–π stacking.

Temperature-induced reversible self-assembly of diphenylalanine peptide and the structural transition from organogel to crystalline nanowires

Controlling the self-assembly of diphenylalanine peptide (FF) into various nanoarchitectures has received great amounts of attention in recent years. Here, we report the temperature-induced reversible self-assembly of diphenylalanine peptide to microtubes, nanowires, or organogel in different solvents. We also find that the organogel in isopropanol transforms into crystalline flakes or nanowires when the temperature increases. The reversible self-assembly in polar solvents may be mainly controlled by electronic and aromatic interactions between the FF molecules themselves, which is associated with the dissociation equilibrium and significantly influenced by temperature. We found that the organogel in the isopropanol solvent made a unique transition to crystalline structures, a process that is driven by temperature and may be kinetically controlled. During the heating-cooling process, FF preferentially self-assembles to metastable nanofibers and organogel. They further transform to thermodynamically stable crystal structures via molecular rearrangement after introducing an external energy, such as the increasing temperature used in this study. The strategy demonstrated in this study provides an efficient way to controllably fabricate smart, temperature-responsive peptide nanomaterials and enriches the understanding of the growth mechanism of diphenylalanine peptide nanostructures.

A new approach to molecular self-assembly through formation of dipeptide-based unique architectures by artificial supersaturation

Morphological transition and the fabrication of unique architectures through molecular self-assembly of dipeptides are caused by the formation of a small nucleus in artificial supersaturation, achieved by quick drying of the solvent due to the local Joule heating. The growth mechanism of "diatom-like" porous microspheres and microtubes is proposed on the basis of several new techniques developed in the study.

A nonenzymatic biosensor based on gold electrodes modified with peptide self-assemblies for detecting ammonia and urea oxidation

We have developed a nonenzymatic biosensor for the detection of ammonia and urea oxidation based on the deposition of peptide microstructures onto thiolated gold electrodes. FF-MNSs/MCP/Au assemblies were obtained by modifying gold substrates with 4-mercaptopyridine (MCP), followed by coating with l,l-diphenylalanine micro/nanostructures (FF-MNSs) grown in the solid-vapor phase. Benzene rings and amide groups with peptide micro/nanostructures interact with synthetic NH4(+) receptors through cation-π and hydrogen bonding. AuOH clusters on the Au surface provided the catalytic sites. The application of a predetermined concentration of analytes at the peptide interfaces activated the catalytic sites. We observed a relationship between the stability of films and the crystal structure of peptides, and we organized the FF-MNSs into an orthorhombic symmetry that was the most suitable assembly for creation of our biosensors. At 0.1 mol L(-1) NaOH, these FF-MNSs/MCP/Au electrodes have electrocatalytic properties regarding ammonia and urea oxidation that are comparable to those of enzyme-based architectures. Under optimal conditions, the electrocatalytic response is proportional to the ammonia and urea concentration in the range 0.1-1.0 mmol L(-1). The sensitivity was calculated as 2.83 and 81.3 μA mmol L(-1) cm(-2) for ammonia and urea, respectively, at +0.40 V (vs SCE). Our detection method is easy to follow, does not require a mediator or enzyme, and has strong potential for detecting urea via nonenzymatic routes.

Design of nanostructures based on aromatic peptide amphiphiles

Aromatic peptide amphiphiles are gaining popularity as building blocks for the bottom-up fabrication of nanomaterials, including gels. These materials combine the simplicity of small molecules with the versatility of peptides, with a range of applications proposed in biomedicine, nanotechnology, food science, cosmetics, etc. Despite their simplicity, a wide range of self-assembly behaviours have been described. Due to varying conditions and protocols used, care should be taken when attempting to directly compare results from the literature. In this review, we rationalise the structural features which govern the self-assembly of aromatic peptide amphiphiles by focusing on four segments, (i) the N-terminal aromatic component, (ii) linker segment, (iii) peptide sequence, and (iv) C-terminus. It is clear that the molecular structure of these components significantly influences the self-assembly process and resultant supramolecular architectures. A number of modes of assembly have been proposed, including parallel, antiparallel, and interlocked antiparallel stacking conformations. In addition, the co-assembly arrangements of aromatic peptide amphiphiles are reviewed. Overall, this review elucidates the structural trends and design rules that underpin the field of aromatic peptide amphiphile assembly, paving the way to a more rational design of nanomaterials based on aromatic peptide amphiphiles.

pH-controlled aggregation polymorphism of amyloidogenic Aβ(16-22): insights for obtaining peptide tapes and peptide nanotubes, as function of the N-terminal capping moiety

Peptide and protein self-assembly resulting in the formation of amyloidogenic aggregates is generally thought of as a pathological event associated with severe diseases. However, amyloid formation may also provide a basis for advanced bionanomaterials, since amyloid fibrils combine unique material-like properties that make them very useful for design of new types of conducting nanowires, bioactive ligands, and biodegradable coatings as drug-encapsulating materials. The morphology of the supramolecular aggregates determines the properties and application range of these bionanomaterials. An important parameter to control the supramolecular morphology, is the overall charge of the peptide, which is related to the pH of the environment. Herein, we describe the design, synthesis and morphological analysis of a series of N-terminally functionalized Aβ(16-22) peptides (∼Lys-Leu-Val-Phe-Phe-Ala-Glu-OH), that underwent a pH-induced polymorphism, ranging from lamellar sheets, helical tapes, peptide nanotubes, and amyloid fibrils as was observed by transmission electron microscopy. Infrared spectroscopy and wide angle X-ray scattering studies showed that peptide self-assembly was driven by β-sheet formation, and that the supramolecular morphology was directed by subtle variations in electrostatic interactions. Finally, a structural model and hierarchy of self-assembly of a peptide nanotube, assembled at pH 1, is proposed.

De novo design and experimental characterization of ultrashort self-associating peptides

Self-association is a common phenomenon in biology and one that can have positive and negative impacts, from the construction of the architectural cytoskeleton of cells to the formation of fibrils in amyloid diseases. Understanding the nature and mechanisms of self-association is important for modulating these systems and in creating biologically-inspired materials. Here, we present a two-stage de novo peptide design framework that can generate novel self-associating peptide systems. The first stage uses a simulated multimeric template structure as input into the optimization-based Sequence Selection to generate low potential energy sequences. The second stage is a computational validation procedure that calculates Fold Specificity and/or Approximate Association Affinity (K*association) based on metrics that we have devised for multimeric systems. This framework was applied to the design of self-associating tripeptides using the known self-associating tripeptide, Ac-IVD, as a structural template. Six computationally predicted tripeptides (Ac-LVE, Ac-YYD, Ac-LLE, Ac-YLD, Ac-MYD, Ac-VIE) were chosen for experimental validation in order to illustrate the self-association outcomes predicted by the three metrics. Self-association and electron microscopy studies revealed that Ac-LLE formed bead-like microstructures, Ac-LVE and Ac-YYD formed fibrillar aggregates, Ac-VIE and Ac-MYD formed hydrogels, and Ac-YLD crystallized under ambient conditions. An X-ray crystallographic study was carried out on a single crystal of Ac-YLD, which revealed that each molecule adopts a β-strand conformation that stack together to form parallel β-sheets. As an additional validation of the approach, the hydrogel-forming sequences of Ac-MYD and Ac-VIE were shuffled. The shuffled sequences were computationally predicted to have lower K*association values and were experimentally verified to not form hydrogels. This illustrates the robustness of the framework in predicting self-associating tripeptides. We expect that this enhanced multimeric de novo peptide design framework will find future application in creating novel self-associating peptides based on unnatural amino acids, and inhibitor peptides of detrimental self-aggregating biological proteins.

Self-assembling amphiphilic peptides

The self-assembly of several classes of amphiphilic peptides is reviewed, and selected applications are discussed. We discuss recent work on the self-assembly of lipopeptides, surfactant-like peptides and amyloid peptides derived from the amyloid-β peptide. The influence of environmental variables such as pH and temperature on aggregate nanostructure is discussed. Enzyme-induced remodelling due to peptide cleavage and nanostructure control through photocleavage or photo-cross-linking are also considered. Lastly, selected applications of amphiphilic peptides in biomedicine and materials science are outlined.

Peptide nanotubes

The self-assembly of different classes of peptide, including cyclic peptides, amyloid peptides and surfactant-like peptides into nanotube structures is reviewed. The modes of self-assembly are discussed. Additionally, applications in bionanotechnology and synthetic materials science are summarized.

A single-residue substitution inhibits fibrillization of Ala-based pentapeptides. A spectroscopic and molecular dynamics investigation

The aggregation properties of two Ala-based pentapeptides were investigated by spectroscopic techniques and molecular dynamics (MD) simulations. The two peptides, both functionalized at the N-terminus with a pyrenyl group, differ in the insertion of an α-aminoisobutyric acid residue at position 4. We showed that this single modification of the homo-peptide sequence inhibits the aggregation of the pentapeptide in aqueous solutions. Atomic force microscopy imaging revealed that the two peptides form mesoscopic aggregates of very different morphologies when deposited on mica. MD experiments showed that the two peptides have a very different propensity to form β-pleated sheet structures, as confirmed by our spectroscopic measurements. The implications of these findings for our understanding of the mechanism leading to the formation of amyloid structures, primary responsible for numerous neurodegenerative diseases, are also discussed.

Triphenylalanine peptides self-assemble into nanospheres and nanorods that are different from the nanovesicles and nanotubes formed by diphenylalanine peptides

Understanding the nature of the self-assembly of peptide nanostructures at the molecular level is critical for rational design of functional bio-nanomaterials. Recent experimental studies have shown that triphenylalanine(FFF)-based peptides can self-assemble into solid plate-like nanostructures and nanospheres, which are different from the hollow nanovesicles and nanotubes formed by diphenylalanine(FF)-based peptides. In spite of extensive studies, the assembly mechanism and the molecular basis for the structural differences between FFF and FF nanostructures remain poorly understood. In this work, we first investigate the assembly process and the structural features of FFF nanostructures using coarse-grained molecular dynamics simulations, and then compare them with FF nanostructures. We find that FFF peptides spontaneously assemble into solid nanometer-sized nanospheres and nanorods with substantial β-sheet contents, consistent with the structural properties of hundred-nanometer-sized FFF nano-plates characterized by FT-IR spectroscopy. Distinct from the formation mechanism of water-filled FF nanovesicles and nanotubes reported in our previous study, intermediate bilayers are not observed during the self-assembly process of FFF nanospheres and nanorods. The peptides in FFF nanostructures are predominantly anti-parallel-aligned, which can form larger sizes of β-sheet-like structures than the FF counterparts. In contrast, FF peptides exhibit lipid-like assembly behavior and assemble into bilayered nanostructures. Furthermore, although the self-assembly of FF and FFF peptides is mostly driven by side chain-side chain (SC-SC) aromatic stacking interactions, the main chain-main chain (MC-MC) interactions also play an important role in the formation of fine structures of the assemblies. The delicate interplay between MC-MC and SC-SC interactions results in the different nanostructures formed by the two peptides. These findings provide new insights into the structure and self-assembly pathway of di-/tri-phenylalanine peptide assemblies, which might be helpful for the design of bioinspired nanostructures.

Expanding the solvent chemical space for self-assembly of dipeptide nanostructures

Nanostructures composed of short, noncyclic peptides represent a growing field of research in nanotechnology due to their ease of production, often remarkable material properties, and biocompatibility. Such structures have so far been almost exclusively obtained through self-assembly from aqueous solution, and their morphologies are determined by the interactions between building blocks as well as interactions between building blocks and water. Using the diphenylalanine system, we demonstrate here that, in order to achieve structural and morphological control, a change in the solvent environment represents a simple and convenient alternative strategy to the chemical modification of the building blocks. Diphenylalanine (FF) is a dipeptide capable of self-assembly in aqueous solution into needle-like hollow micro- and nanocrystals with continuous nanoscale channels that possess advantageous properties such as high stiffness and piezoelectricity and have so emerged as attractive candidates for functional nanomaterials. We investigate systematically the solubility of diphenylalanine in a range of organic solvents and probe the role of the solvent in the kinetics of self-assembly and the structures of the final materials. Finally, we report the crystal structure of the FF peptide in microcrystalline form grown from MeOH solution at 1 Å resolution and discuss the structural changes relative to the conventional materials self-assembled in aqueous solution. These findings provide a significant expansion of the structures and morphologies that are accessible through FF self-assembly for existing and future nanotechnological applications of this peptide. Solvent mediation of molecular recognition and self-association processes represents an important route to the design of new supramolecular architectures deriving their functionality from the nanoscale ordering of their components.

Why are diphenylalanine-based peptide nanostructures so rigid? Insights from first principles calculations

The diphenylalanine peptide self-assembles to form nanotubular structures of remarkable mechanical, piezolelectrical, electrical, and optical properties. The tubes are unexpectedly stiff, with reported Young's moduli of 19-27 GPa that were extracted using two independent techniques. Yet the physical basis for the remarkable rigidity is not fully understood. Here, we calculate the Young's modulus for bulk diphenylalanine peptide from first principles, using density functional theory with dispersive corrections. The calculation demonstrates that at least half of the stiffness of the material is the result of dispersive interactions. We further quantify the nature of various inter- and intramolecular interactions. We reveal that despite the porous nature of the lattice, there is an array of rigid nanotube backbones with interpenetrating "zipper-like" aromatic interlocks that result in stiffness and robustness. This presents a general strategy for the analysis of bioinspired functional materials and may pave the way for rational design of bionanomaterials.

Short peptide based self-assembled nanostructures: implications in drug delivery and tissue engineering

Self-assembling peptides with many potential biomedical applications.

Highly fluorescent peptide nanoribbon impregnated with Sn-porphyrin as a potent DNA sensor

Highly fluorescent and thermo-stable peptide nanoribbons (PNRs) were fabricated by solvothermal self-assembly of a single peptide (D,D-diphenyl alanine peptides) with Sn-porphyrin (trans-dihydroxo[5,10,15,20-tetrakis(p-tolyl)porphyrinato] Sn(IV) (SnTTP(OH)2)). The structural characterization of the as-prepared nanoribbons was performed by transmitting electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), FT-IR and Raman spectroscopy, indicating that the lipophilic Sn-porphyrins are impregnated into the porous surface formed in the process of nanoribbon formation through intermolecular hydrogen bonding of the peptide main chains. Consequently the Sn-porphyrin-impregnated peptide nanoribbons (Sn-porphyrin-PNRs) exhibited typical UV-visible absorption spectrum of the monomer porphyrin with a red shifted Q-band, and their fluorescence quantum yield was observed to be enhanced compared to that of free Sn-porphyrin. Interestingly the fluorescence intensity and lifetimes of Sn-porphyrin-PNRs were selectively affected upon interaction with nucleotide base sequences of DNA while those of free Sn-porphyrins were not affected by binding with any of the DNA studied, indicating that DNA-induced changes in the fluorescence properties of Sn-porphyrin-PNRs are due to interaction between DNA and the PNR scaffold. These results imply that Sn-porphyrin-PNR will be useful as a potent fluorescent protein analogue and as a biocompatible DNA sensor.

L-diphenylalanine microtubes as a potential drug-delivery system: characterization, release kinetics, and cytotoxicity

Microtubes obtained from the self-assembly of L-diphenylalanine (FF-MTs) were evaluated as potential vehicles for drug delivery. The biological marker Rhodamine B (RhB) was chosen as a model drug and conjugated to the peptide arrays during self-organization in the liquid phase. Microscopy and X-ray studies were performed to provide morphological and structural information. The data revealed that the cargo was distributed either in small aggregates at the hydrophobic surface of the FF-MTs or homogeneously embedded in the structure, presumably anchored at polar sites in the matrix. Raman spectroscopy revealed notable shifts of the characteristic RhB resonance peaks, demonstrating the successful conjugation of the fluorophore and peptide assemblies. In vitro assays were conducted in erythrocytes and fibroblast cells. Interestingly, FF-MTs were found to modulate the release of the load. The release of RhB from the FF-MTs followed first-order kinetics with a steady-state profile, demonstrating the potential of these carriers to deliver drugs at constant rates in the body. Cytotoxicity investigations revealed high cell viability up to concentrations of 5 mg mL(-1), demonstrating the low toxicity of the FF-MTs.

Effect of solvent on the self-assembly of dialanine and diphenylalanine peptides

Diphenylalanine (FF) is a very common peptide with many potential applications, both biological and technological, due to a large number of different nanostructures which it attains. The current work concerns a detailed study of the self-assembled structures of FF in two different solvents, an aqueous (H2O) and an organic (CH3OH) through simulations and experiments. Detailed atomistic molecular dynamics (MD) simulations of FF in both solvents have been performed, using an explicit solvent model. The self-assembling propensity of FF in water is obvious while in methanol a very weak self-assembling propensity is observed. We studied and compared structural properties of FF in the two different solvents and a comparison with a system of dialanine (AA) in the corresponding solvents was also performed. In addition, temperature-dependence studies were carried out. Finally, the simulation predictions were compared to new experimental data, which were produced in the framework of the present work. A very good qualitative agreement between simulation and experimental observations was found.