Optical chemosensors and reagents to detect explosives

Colorimetric sensors and nanoprobes for characterizing antioxidant and energetic substances

The development of analytical techniques for antioxidant compounds is important, because antioxidants that can inactivate reactive species and radicals are health-beneficial compounds, also used in the preservation of food and protection of almost every kind of organic substance from oxidation. Energetic substances include explosives, pyrotechnics, propellants and fuels, and their determination at bulk/trace levels is important for the safety and well-being of modern societies exposed to various security threats. Most of the time, in field/on site detection of these important analytes necessitates the use of colorimetric sensors and probes enabling naked-eye detection, or low-cost and easy-to-use fluorometric sensors. The use of nanosensors brings important advantages to this field of analytical chemistry due to their various physico-chemical advantages of increased surface area, surface plasmon resonance absorption of noble metal nanoparticles, and superior enzyme-mimic catalytic properties. Thus, this critical review focuses on the design strategies for colorimetric sensors and nanoprobes in characterizing antioxidant and energetic substances. In this regard, the main themes and properties in optical sensor design are defined and classified. Nanomaterial-based optical sensors/probes are discussed with respect to their mechanisms of operation, namely formation and growth of noble metal nanoparticles, their aggregation and disaggregation, displacement of active constituents by complexation or electrostatic interaction, miscellaneous mechanisms, and the choice of metallic oxide nanoparticles taking part in such formulations.

Highly fluorescent scandium-tetracarboxylate frameworks: selective detection of nitro-aromatic compounds, sensing mechanism, and their application

Recently, exploring new luminescent metal-organic frameworks (LMOFs) to selectively detect nitro-aromatic compounds (NACs) has been a hot topic of research. Simultaneously, it is still a challenging issue to understand the sensing mechanism of luminescent MOFs interacting with NACs at the molecular level. In this work, highly fluorescent Sc-tetracarboxylate frameworks (Sc-EBTC) have been successfully synthesized through a solvothermal method. The as-prepared Sc-EBTC crystals have good thermal stability, chemical stability as well as strong fluorescence (λ_ex = 320 nm and λ_em = 400 nm), and they can detect various NACs rapidly (as short as 30 s), selectively and efficiently by the "turn-off" fluorescence mechanism. The detection limits of Sc-EBTC toward 2,4-DNP and 4-NP are quantified to be 5.71 ppb and 6.26 ppb, respectively. Furthermore, to better understand the sensing mechanism, we attempt to use solid-state NMR and X-ray photoelectron spectroscopy to vividly characterize the charge transfer caused by the interaction between NAC molecules and the MOF at the molecular level. Additionally, test strips were made successfully for the practical detection of the NACs. This study demonstrates that the MOF constructed from the H₄EBTC ligands might be a promising candidate for the detection of trace NACs.

Ratiometric Turn-On Fluorophore Displacement Ensembles for Nitroaromatic Explosives Detection

There is a recognized need in the area of explosives detection for fluorescence-based sensing systems that are capable of not only producing a turn-on response but also generating a distinctive spectral signature for a given analyte. Here, we report several supramolecular ensembles displaying efficient fluorophore displacement that give rise to an increase in fluorescence intensity upon exposure to various nitroaromatic compounds. The synthetic supramolecular constructs in question consist of a tetrathiafulvalene (TTF)-based pyrrolic macrocycle, benzo-TTF-calix[4]pyrrole (Bz-TTF-C4P), and fluorescent dyes, monomeric or dimeric naphthalenediimide (NDI) and perylenediimide (PDI) derivatives, as well as chloride or hexafluorophosphate (PF₆^-) salts of rhodamine 6G (Rh-6G). In chloroform solution, these assemblies exist in the form of discrete supramolecular complexes or oligomeric aggregates depending on the specific dye combinations in question. Each ensemble was tested as a potential explosive-responsive fluorescence indicator displacement assay (FIDA) by challenging it with a series of di- and trinitroaromatic compounds and examining the change in fluorescence spectral characteristics. Upon addition of nitroaromatic compounds (NACs), either a "turn-on" or a "turn-off" fluorescent response was observed depending on the nature of the constituent fluorophore and, where applicable, the counteranion. The FIDAs based on the PDI derivatives were found to display not only a ratiometric fluorescence enhancement but also analyte-dependent spectral changes when treated with NACs. The NAC-induced fluorescence spectral response of each ensemble was rationalized on the basis of various solution-phase spectroscopic studies, as well as single-crystal X-ray diffraction analyses.

Eu(III)-organic complex as recyclable dual-functional luminescent sensor for simultaneous and quantitative sensing of 2,4,6-trinitrophenol and CrO42- in aqueous solution

A novel metal-organic complex (MOC) {[Eu₂(HL)₂(H₂O)₄]·3H₂O}_n (1) (H₄L = 3,3',5,5'-azoxybenzenetetracarboxylic acid) has been successfully constructed, which exhibits a fascinating 2D bilayer network with the 1D open channels and has excellent water, pH and thermal stabilities. Luminescence studies reveal that 1 can detect TNP and CrO₄^2- ions with high selectivity and sensitivity in aqueous solution, even if there are related interfering substances. And the mechanisms of luminescence recognitions are discussed on the basis of experiments and theoretical calculations. Furthermore, 1 shows excellent photostability and can be repeatedly used in the above two detection systems. Most importantly, 1 can detect TNP and CrO₄^2- concentration with a good recovery rate in practical application. Therefore, 1 should be a potential dual-functional luminescent sensor for reliable sensing of TNP and CrO₄^2- in the field.

Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor

The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.

Discerning Detection of Mutagenic Biopollutant TNP from Water and Soil Samples with Transition Metal-Containing Luminescence Metal-Organic Frameworks

Two luminescent MOFs, Mn@MOF and Cd@MOF, have been reported herein, which are capable of selectively detecting 2,4,6-trinitrophenol (TNP), one of the potent organic water pollutants in the class of mutagenic explosive nitroaromatic compounds (epNACs). It is perceived that the d¹⁰-based Cd(II)-constituting MOF shows a better response in the realm of TNP-like nitroaromatic sensing in comparison to the d⁵-based Mn@MOF which may possess lower electron density over the conjugated building blocks. The sensing competences of these chemosensors have been explored by means of various spectroscopic experimentations, and it is observed that for both d⁵ and d¹⁰-containing MOFs, the initial fluorescence intensity is significantly quenched in response to an aqueous solution of TNP. However, Cd@MOF is more selective and sensitive toward TNP over several other epNACs than Mn@MOF. The high chemical stability of the MOF samples, as well as its amusing sensing efficiency of Cd@MOF, further instigated to investigate the sensing ability in various environmental specimens like soil and water culled from several zones of West Bengal, India.

Flexible porphyrin doped polymer optical fibers for rapid and remote detection of trace DNT vapor

With the rapid growth of anti-terrorist activities worldwide, it becomes an emerging requirement to rapidly and accurately detect hidden explosive threats. However, the safety issue during the explosive material detection, e.g. unexpected explosion, is still an insurmountable challenge. In this study, we design and mass-produce a novel kind of flexible 5,10,15,20-tetrakis(4-aminophenyl)porphyrin doped polymer optical fiber (PPOF) for rapid and accurate detection of trace 2,4-dinitrotoluene (DNT) vapor based on the DNT induced florescence quenching mechanism. The influence of doping concentration, bending, and temperature on the sensing performance is investigated. PPOF shows immunity to bending, enabling it to work in a harsh environment. It is experimentally demonstrated that the limit of detection and response time of the proposed PPOF could reach around 120 ppb and 3 minutes, respectively, which make it much better than other techniques. Owning to its inherent advantages including low-cost, remote-control capability, and compatibility with optical communication networking, PPOF can be constructed the quasi-distributed sensing networking of explosive matters in the future, providing a new strategy for anti-terrorism.

A novel SERS selective detection sensor for trace trinitrotoluene based on meisenheimer complex of monoethanolamine molecule

Trinitrotoluene (TNT) is a primary component in chemical explosives, making them a common focus in public safety detection. However, it is very difficult to achieve selective and sensitive detection of the TNT molecule in practical application. In the present study, a simple surface enhanced Raman scattering (SERS) sensing based on monoethanolamine (MEA) - modified gold nanoparticles (Au NPs) was expanded for high selectivity and sensitive detecting of TNT in an envelope, luggage, lake water, and clothing through a quickly sampling and detection process. The monoethanolamine molecule based on Meisenheimer complex lights up ultra-high Raman scattering of a nonresonant molecule on the superficial coat of gold nanoparticles. Using this detection sensor, a molecular bridge can be established to selectively detect trinitrotoluene with a detection limit of 21.47 pM. We were able to rapidly identification trinitrotoluene molecule with a powerful selective over the familiar interfering substances nitrophenol, picric acid, 2,4-dinitrophenol, and 2,4-dinitrotoluene. The outcome in this work supply an efficient solution to the test of trinitrotoluene and to establishing a SERS sensor analytical strategy. The studies have demonstrated that the MEA-Au NPs based SERS sensing can be potentially used in field detection the trace amount of chemical explosives for public security.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

Selective determination of 2,4,6-trinitrophenol by using a novel carbon nanoparticles as a fluorescent probe in real sample

2,4,6-Trinitrophenol (TNP) is widely used in our daily life; however, excessive use of TNP can lead to a large number of diseases. Therefore, it is necessary to find an effective method to detect TNP. Herein, the rapid fluorescence quenching by TNP was developed for the fluorometric determination of TNP in aqueous medium based on the internal filter effect. Nitrogen-sulfur-codoped carbon nanoparticles (N,S-CNPs), synthesized by a one-pot solvothermal method with the precursors of L-cysteine and citric acid, were applied for the determination of TNP as a fluorescent probe. The excitation peak center of N,S-CNPs and the emission peak center are 340 nm and 423 nm, respectively. The probe can be used in a variety of conditions to detect TNP due to its relatively stable properties. Meanwhile, it has a fast response time (< 1 min), wide linear response range (0.1-40 μM), and low detection limit (43.0 nM). This probe still has excellent selectivity and high sensitivity. The method was also used to detect standard water samples with a satisfactory recovery rate, and it will be used in the application of pollutants and clinical diseases. Graphical abstract.

An electron-rich small AIEgen as a solid platform for the selective and ultrasensitive on-site visual detection of TNT in the solid, solution and vapor states

Promising research on AIEgen (aggregation-induced emission active fluorogens)-based sensors for the detection of explosives (mostly picric acid) is primarily dominated by polymeric molecules. However, herein, we report the ability of a recently developed anthracene-based electron-rich π-conjugate as a small and suitable AIEgen for the selective and sensitive detection of 2,4,6-trinitrotoluene (TNT) through fluorescence (PL) quenching. This fluorophore consists of trimethoxybenzene-linked anthranyl-π-phenothiazine, which is recognized as a significantly electron-rich AIEgen suitable for the selective detection of TNT detection. The detection of TNT was performed in the solid, liquid and vapor states using this AIEgen in the aggregate or solid-state. The detection limit in the solution state was measured to be 3.2 × 10-9 M. When this fluorophore was impregnated on a paper strip for on-site visual detection, TNT was detected up to the 10-14 M level by the naked eye using a 365 nm UV-torch. The paper strip was also successfully used to detect TNT in the vapour state. This application was further extended to detect TNT in field soil. The detection of TNT by replacing trimethoxybenzene in the fluorophore with dimethoxy or monomethoxy was a failure, indicating the requirement of an adequate electron-rich system. Unlike the previous report with static quenching as the main reason for TNT detection, our experimental observations demonstrated the participation of favorable photo-induced electron transfer (PET) between TNT and the fluorophore as the origin of the PL quenching.

Nitrogen and Phosphorus Co-Doped Carbon Dots for Selective Detection of Nitro Explosives

In this work, a highly selective and sensitive method has been developed for the detection of trinitrophenol (TNP), which is a dangerous explosive. For this purpose, N and P co-doped carbon dots (NP-Cdots) have been used. Synthesis of N and P co-doped carbon dots has been carried out by a simple and quick method. X-ray photoelectron spectroscopy analysis was carried out to detect the doping of N and P. These carbon dots are insoluble in water (inNP-Cdots). These carbon dots were functionalized by treating them with conc. HNO3 so that they become water-soluble (wsNP-Cdots). These dots were characterized by different analytical techniques such as IR, UV-vis, and fluorescence spectroscopy. The as-prepared wsNP-Cdots have good fluorescence properties. The average diameter of wsNP-Cdots is found to be 5.7 nm with an interlayer spacing (d-spacing) of 0.16 nm. The as-prepared wsNP-Cdots are highly sensitive and selective toward TNP, as observed using a fluorescence quenching technique. The quenching constant for TNP is found to be very high (8.06 × 104 M-1), which indicates its high quenching ability. The limit of detection is found to be 23 μM.

The high selective chemo-sensors for TNP based on the mono- and di-substituted multifarene[2,2] with different fluorescence quenching mechanism

The chem-sensors, based on the triazole-CH₂-anthracene-functionalized multifarene[2,2] were successfully synthesized, which could efficiently and rapidly detect 2,4,6-trinitrophenol (TNP). The high specificities of the proposed macrocyclic sensors were achieved by selective response for TNP in the existence of other competing phenolic compounds, and the limits of detection in ∼10^-8 mol/L range were produced to confirm the high sensitivities of the chem-sensors, which could be attributed to the mechanism of electron and resonance energy transfer processes in the complexes with the supramolecular interactions. ¹H NMR titration analysis revealed the actual binding position should be the triazole rings of sensors with the hydroxyl group on TNP to offer a hydrogen bonding. The extraordinary sensing properties endued the compounds as sensitive fluorometric chem-sensors for the potential application of TNP detection.

Hydrostatic Pressure-Induced Spectral Variation of Reichardt's Dye: A Polarity/Pressure Dual Indicator

The famous solvatochromic Reichardt's dye was applied to quantify hydrostatic pressure in media. The UV/vis spectra of the dye in various organic solvents are shifted bathochromically or hypsochromically at the shorter- or longer-wavelength band, respectively, upon hydrostatic pressurization. The E _T value, determined by an absorption maximum, in ethyl acetate increases from 38.5 kcal mol^-1 at 0.1 MPa to 39.2 kcal mol^-1 at 300 MPa, which is mostly equal to the one in chloroform at 0.1 MPa. These spectroscopic origins were supported by the time-dependent density functional theory (TD-DFT) calculations. The concept and approach proposed in this paper, i.e., a dual indicator, should attract the attention of a broad spectrum in multidisciplinary science.