A remarkable adsorbent for removal of contaminants of emerging concern from water: Porous carbon derived from metal azolate framework-6

A series of metal-azolate frameworks or MAFs-MAF-4, -5, and -6-were synthesized and pyrolyzed to prepare porous carbons derived from MAFs (CDM-4, -5, -6, respectively). Not only the obtained carbons but also MAFs were characterized and applied for the adsorption of organic contaminants of emerging concern (CECs, including pharmaceuticals and personal care products) such as salicylic acid, clofibric acid, diclofenac sodium, bisphenol-A, and oxybenzone (OXB) from water. CDM-6 was found to be the most remarkable adsorbent among the tested ones (including activated carbon) for all the adsorbates. OXB was taken as a representative adsorbate for detailed adsorption studies as well as understanding the adsorption mechanism. H-bonding (H-acceptor: CDM; H-donor: CECs) was suggested as the principal mechanism for the adsorption of tested adsorbates. Finally, CDMs, especially CDM-6, were suggested as highly efficient and easily recyclable adsorbents for water purification.

Pt Electrodes Enable the Formation of μ4-O Centers in MOF-5 from Multiple Oxygen Sources

The μ₄-O^2- ions in the Zn₄O(O₂C-)₆ secondary building units of Zn₄O(1,4-benzenedicarboxylate)₃ (MOF-5) electrodeposited under cathodic bias can be sourced from nitrate, water, and molecular oxygen when using platinum gauze as working electrodes. The use of Zn(ClO₄)₂·6H₂O, anhydrous Zn(NO₃)₂, or anhydrous Zn(CF₃SO₃)₂ as Zn²⁺ sources under rigorous control of other sources of oxygen, including water and O₂, confirm that the source of the μ₄-O^2- ions can be promiscuous. Although this finding reveals a relatively complicated manifold of electrochemical processes responsible for the crystallization of MOF-5 under cathodic bias, it further highlights the importance of hydroxide intermediates in the formation of the Zn₄O(O₂C-R) secondary building units in this iconic material and is illustrative of the complicated crystallization mechanisms of metal-organic frameworks in general.

Controlled Growth of Metal-Organic Frameworks on Polymer Brushes

Polymer brushes are for the first time used to induce the synthesis of metal-organic frameworks (MOFs). The semi-fixed polymer chains provide a confined environment, which allows a mild growth of MOFs in between polymer chains to give surface-attached spherical MOF nanoparticles, in contrast to the larger MOF cubes/plates formed simultaneously in solution. Polymer brushes bearing carboxylate acid functionalities are indispensable for the formation of surface bound MOFs, while no MOF nanoparticles are observed on neutral polymer brushes. Characterization of the resultant MOF/polymer brushes hybrid film indicates the formation of crystalline MOF structure. The dimension of surface-attached MOFs can be fine-tuned from 20 nm to 1.4 μm simply by varying the structural parameter of polymer brushes and the nucleation duration. The method is not only applicable to the synthesis of MOF-5 and MIL-125, but shows great potential for the preparation of other surface-attached MOFs.

TiO2-Containing Carbon Derived from a Metal-Organic Framework Composite: A Highly Active Catalyst for Oxidative Desulfurization

A new metal-organic framework (MOF) composite consisting of Ti- and Zn-based MOFs (ZIF-8(x)@H₂N-MIL-125; in brief, ZIF(x)@MOF) was designed and synthesized. The pristine MOF [H₂N-MIL-125 (MOF)]- and an MOF-composite [ZIF(30)@MOF]-derived mesoporous carbons consisting of TiO₂ nanoparticles were prepared by pyrolysis (named MDC-P and MDC-C, respectively). MDC-C showed a higher surface area, larger pore sizes, and larger mesopore volumes than MDC-P. In addition, the TiO₂ nanoparticles on MDC-C have more uniform shapes and sizes and are smaller than those of MDC-P. The obtained MDC-C and MDC-P [together with MOF, ZIF(30)@MOF, pure/nanocrystalline TiO₂, and activated carbon] were applied in the oxidative desulfurization reaction of dibenzothiophene in a model fuel. The MDC-C, even with a lower TiO₂ content than that of MDC-P, showed an outstanding catalytic performance, especially with a very low catalyst dose (i.e., a very high quantity of dibenzothiophene was converted per unit weight of the catalyst), fast kinetics (∼3 times faster than that for MDC-P), and a low activation energy (lower than that for any reported catalyst) for the oxidation of dibenzothiophene. The large mesopores of MDC-C and the well-dispersed/small TiO₂ might be the dominant factors for the superior catalytic conversions. The oxidative desulfurization of other sulfur-containing organic compounds with various electron densities was also studied with MDC-C to understand the mechanism of catalysis. Moreover, the MDC-C catalyst can be reused many times in the oxidative desulfurization reaction after a simple washing with acetone. Finally, composing MOFs and subsequent pyrolysis is suggested as an effective way to prepare a catalyst with well-dispersed active sites, large pores, and high mesoporosity.

Ternary Alloys Encapsulated within Different MOFs via a Self-Sacrificing Template Process: A Potential Platform for the Investigation of Size-Selective Catalytic Performances

Functional nanoparticles encapsulated within metal-organic frameworks (MOFs) as an emerging class of composite materials attract increasing attention owing to their enhanced or even novel properties caused by the synergistic effect between the two functional materials. However, there is still no ideal composite structure as platform to systematically analyze and evaluate the relation between the enhanced catalytic performance of composites and the structure of MOF shells. In this work, taking RhCoNi ternary alloy nanoflowers, for example, first the RhCoNi@MOF composite catalysts sheathed with different structured MOFs via a facile self-sacrificing template process are successfully fabricated. The structure type of MOF shells is easily adjustable by using different organic molecules as etchant and coordination reagent (e.g., 2,5-dihydroxyterephthalic acid or 2-methylimidazole), which can dissolve out the Co or Ni element in the alloy template in a targeted manner, thereby producing ZIF-67(Co) or MOF-74(Ni) shells accordingly. With the difference between the two MOF shells in the aperture sizes, the as-prepared two RhCoNi@MOF composites preform distinct size selectivity during the alkene hydrogenation. This work would help us to get more comprehensive understanding of the intrinsic role of MOFs behind the enhanced catalytic performance of nanoparticle@MOF composites.

Local Environment of Terbium(III) Ions in Layered Nanocrystalline Zirconium(IV) Phosphonate-Phosphate Ion Exchange Materials

The structures of Zr(IV) phosphonate-phosphate based, unconventional metal organic framework materials have been determined using atomic pair distribution function analysis of high energy, X-ray total scattering diffraction data. They are found to form as nanocrystalline layers of Zr phosphate, similar to the bulk, but with a high degree of interlayer disorder and intermediate intralayer order extending around 5 nm. These materials are of interest for their high selectivity for 3+ lanthanide ions. To investigate the mechanism of the selectivity, we utilize difference pair distribution function analysis to extract the local structural environment of Tb³⁺ ions loaded into the framework. The ions are found to sit between the layers in a manner resembling the local environment of Tb in Scheelite-type terbium phosphate. By mapping this local structure onto that of the refined structure for zirconium-phenyl-phosphonate, we show how dangling oxygens from the phosphate groups, acting like nose hairs, are able to reorient to provide a friendly intercalation environment for the Tb³⁺ ions.

Electrochemical fabrication of copper-containing metal-organic framework films as amperometric detectors for bromate determination

A facile electrochemical plating strategy has been employed to prepare the electroactive metal-organic framework film (NENU-3) onto a copper electrode in the acid electrolyte containing 1,3,5-benzenetricarboxylic acid (H3BTC) and phosphotungstic acid (PTA). The as-made NENU-3 films have been characterized using powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric analyses (TGA). These analyses indicate that NENU-3 films have high phase purity and high stability. Further, different electrochemical techniques are utilized for measuring the electrochemical behaviors of the NENU-3 film electrodes. Accordingly, the kinetic parameters of a NENU-3 film electrode towards the electrocatalytic reduction of bromate are obtained, including the electron transfer coefficient (α), the catalytic rate constant (ks), and the diffusion coefficient (D). The film electrodes present excellent electrocatalytic ability for the bromate reduction, and can be used successfully for the amperometric detection of bromate. Under the optimized conditions, the proposed sensor exhibits a wide linear range (0.05-72.74 mM) and a lower detection limit (12 μM) measured by chronoamperometry (CA). Moreover, the films possess high electrochemical stability and strong anti-interference capability in the bromate detection process. It has been demonstrated that the electrochemical plating method reported here offers a reliable and efficient way to fabricate MOF films on conductive substrates for bromate detection.

Deciphering the Structural Relationships of Five Cd-Based Metal-Organic Frameworks

The one-pot reaction of Cd(NO₃)₂·4H₂O and 5-(6-(hydroxymethyl)pyridin-3-yl)isophthalic acid (H₂L) in DMF/H₂O (DMF = N,N-dimethylformamide) produced a two-dimensional (2D) metal-organic framework (MOF) of [Cd(L)(H₂O)₂] (A) bearing aqua-bridged Cd centers, accompanied by two three-dimensional (3D) MOFs [Cd(L)(DMF)_0.5] (B) and [Cd(L)] (C). Removing the bridging aqua molecules of A by heating led to the formation of an additional 3D MOF of [Cd(L)] (D) in a single-crystal to single-crystal (SCSC) manner. The search for the preceding compound that could convert to A resulted in the isolation of a 2D MOF [Cd(L)(DMF)] (E) that readily converted to A in water, but with the loss of single crystallinity. Upon excitation at 350 nm, A, D, E, and the ligand H₂L fluoresced at 460 nm, 468 nm, 475 nm, and 411 nm, respectively. The fluorescence of A could be used for the selective detection of Fe³⁺ in water down to 0.58 ppm. This quenching was not affected by the presence of other common metal ions.

Gel-based morphological design of zirconium metal-organic frameworks

The ability of metal-organic frameworks (MOFs) to gelate under specific synthetic conditions opens up new opportunities in the preparation and shaping of hierarchically porous MOF monoliths, which could be directly implemented for catalytic and adsorptive applications. In this work, we present the first examples of xero- or aerogel monoliths consisting solely of nanoparticles of several prototypical Zr4+-based MOFs: UiO-66-X (X = H, NH2, NO2, (OH)2), UiO-67, MOF-801, MOF-808 and NU-1000. High reactant and water concentrations during synthesis were observed to induce the formation of gels, which were converted to monolithic materials by drying in air or supercritical CO2. Electron microscopy, combined with N2 physisorption experiments, was used to show that irregular nanoparticle packing leads to pure MOF monoliths with hierarchical pore systems, featuring both intraparticle micropores and interparticle mesopores. Finally, UiO-66 gels were shaped into monolithic spheres of 600 μm diameter using an oil-drop method, creating promising candidates for packed-bed catalytic or adsorptive applications, where hierarchical pore systems can greatly mitigate mass transfer limitations.

Metal-Organic Framework UiO-66 Layer: A Highly Oriented Membrane with Good Selectivity and Hydrogen Permeance

The 3D metal-organic framework (MOF) structure UiO-66 [Zr₆O₄(OH)₄(bdc)₆], featuring triangular pores of approximately 6 Å, has been successfully prepared as a thin supported membrane layer with high crystallographic orientation on ceramic α-Al₂O₃ supports. The adhesion of the MOF layer to the ceramic support was investigated in different taxing conditions. Furthermore, by coating this UiO-66 membrane with a thin polyimide (Matrimid) top layer, we prepared a multilayer composite. Said membranes have been evaluated in the separation of hydrogen (H₂) from different binary mixtures at room temperature. H₂ as the smallest molecule (2.9 Å) should pass the UiO-66 membrane preferably since the kinetic diameters of all the other gases under study are larger. The gas mixture separation factors for the neat UiO-66 membrane were indeed found to be H₂/CO₂ = 5.1, H₂/N₂ = 4.7, H₂/CH₄ = 12.9, H₂/C₂H₆ = 22.4, and H₂/C₃H₈ = 28.5. The coating with Matrimid led to a sharp cutoff for gases with kinetic diameters greater than 3.7 Å, resulting in increased separation performance.

Macroscopic Simulation of Deformation in Soft Microporous Composites

Soft microporous materials exhibit properties, such as gated adsorption and breathing, which are highly desirable for many applications. These properties are largely studied for single crystals; however, many potential applications expect to construct structured or composite systems, examples of which include monoliths and mixed-matrix membranes. Herein, we use finite element methods to predict the macroscopic mechanical response of composite microporous materials. This implementation connects the microscopic treatment of crystalline structures to the response of a macroscopic sample. Our simulations reveal the bulk modulus of an embedded adsorbent within a composite is affected by the thickness and properties of the encapsulating layer. Subsequently, we employ this methodology to examine mixed-matrix membranes and materials of negative linear compressibility. This application of finite element methods allows for unprecedented insight into the mechanical properties of real-world systems and supports the development of composites containing mechanically anomalous porous materials.

Epitaxial Growth of MOF Thin Film for Modifying the Dielectric Layer in Organic Field-Effect Transistors

Metal-organic framework (MOF) thin films are important in the application of sensors and devices. However, the application of MOF thin films in organic field effect transistors (OFETs) is still a challenge to date. Here, we first use the MOF thin film prepared by a liquid-phase epitaxial (LPE) approach (also called SURMOFs) to modify the SiO₂ dielectric layer in the OFETs. After the semiconductive polymer of PTB7-Th (poly[4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)benzo[1,2-b:4,5-b']dithiophene-co-3-fluorothieno[3,4-b]thiophene-2-carboxylate]) was coated on MOF/SiO₂ and two electrodes on the semiconducting film were deposited sequentially, MOF-based OFETs were fabricated successfully. By controlling the LPE cycles of SURMOF HKUST-1 (also named Cu₃(BTC)₂, BTC = 1,3,5-benzenetricarboxylate), the performance of the HKUST-1/SiO₂-based OFETs showed high charge mobility and low threshold voltage. This first report on the application of MOF thin film in OFETs will offer an effective approach for designing a new kind of materials for the OFET application.

Nanoparticle-Directed Metal-Organic Framework/Porous Organic Polymer Monolithic Supports for Flow-Based Applications

A two-step nanoparticle-directed route for the preparation of macroporous polymer monoliths for which the pore surface is covered with a metal-organic framework (MOF) coating has been developed to facilitate the use of MOFs in flow-based applications. The flow-through monolithic matrix was prepared in a column format from a polymerization mixture containing ZnO-nanoparticles. These nanoparticles embedded in the precursor monolith were converted to MOF coatings via the dissolution-precipitation equilibrium after filling the pores of the monolith with a solution of the organic linker. Pore surface coverage with the microporous zeolitic imidazolate framework ZIF-8 resulted in an increase in surface area from 72 to 273 m² g^-1. Monolithic polymer containing ZIF-8 coating was implemented as a microreactor catalyzing the Knoevenagel condensation reaction and also in extraction column format enabling the preconcentration of trace levels of toxic chlorophenols in environmental waters. Our approach can be readily adapted to other polymers and MOFs thus enabling development of systems for flow-based MOF applications.

High-Quality Metal-Organic Framework ZIF-8 Membrane Supported on Electrodeposited ZnO/2-methylimidazole Nanocomposite: Efficient Adsorbent for the Enrichment of Acidic Drugs

Metal–organic framework (MOF) membranes have received increasing attention as adsorbents, yet the defects in most membrane structures greatly thwart their capacity performance. In this work, we fabricated a novel ZnO/2-methylimidazole nanocomposite with multiple morphology by electrochemical method. The nanocomposite provided sufficient and strong anchorages for the zeolitic imidazolate frameworks-8 (ZIF-8) membrane. Thus, a crack-free and uniform MOF membrane with high performance was successfully obtained. In this case, 2-methylimidazole was believed to react with ZnO to form uniform ZIF nuclei, which induced and guided the growth of ZIF-8 membrane. The as-prepared ZIF-8 membrane had large surface area and good thermal stability. As expected, it displayed high adsorption capacity for acidic drugs (e.g., ibuprofen, ketoprofen and acetylsalicylic acid) as they could interact through hydrophobic, hydrogen bonding and π-π stacking interaction. Accordingly, by coupling with gas chromatography the ZIF-8 membrane was successfully applied to the real-time dynamic monitoring of ibuprofen in patient’s urine.

Synthesis of nanostructured alumina with ultrahigh pore volume for pH-dependent release of curcumin

Versatile new high porous alumina supports were synthesized by double templates. They gave different release state for curcumin drug. The release of (insoluble) curcumin reached to 80% in SGF. The new formulation enhanced the SH-SY5Y cells survival.

Amorphous Co(MeIm)2 framework coating on AuCo for size-selective photocatalysis and interface transfer

Magnetic AuCo–MeIm showed the size-selective photocatalytic removal of Cr(vi) and methylene blue attributed to the amorphous Co(MeIm)₂ coatings.

Bimetal-Organic Framework Derived CoFe2 O4 /C Porous Hybrid Nanorod Arrays as High-Performance Electrocatalysts for Oxygen Evolution Reaction

Porous CoFe₂ O₄ /C NRAs supported on nickel foam@NC (denoted as NF@NC-CoFe₂ O₄ /C NRAs) are directly fabricated by the carbonization of bimetal-organic framework NRAs grown on NF@poly-aniline(PANI), and they exhibit high electrocatalytic activity, low overpotential, and high stability for the oxygen evolution reaction in alkaline media.

Fabrication of ZIF-9@super-macroporous microsphere for adsorptive removal of Congo red from water

A novel composite adsorbent of ZIF-9 nanoparticles growing on super-macroporous microspheres (SMM) was synthesized via in situ growth method for adsorptive removal of Congo red from water.

Molecular tectonics: hierarchical organization of heterobimetallic coordination networks into heterotrimetallic core–shell crystals

Core–shell heterotrimetallic crystals are generated by 3D epitaxial growth using isostructural and almost isometric crystals based on an organometallic tecton and MX₂ complexes.

Fe3O4@HKUST-1 and Pd/Fe3O4@HKUST-1 as magnetically recyclable catalysts prepared via conversion from a Cu-based ceramic

A Fe₃O₄/Cu- ceramic system converted into a magnetic HKUST-1 composite was used as a recyclable catalyst for one-pot cascade and hydrogenation reactions.

Surface-supported metal–organic framework thin films: fabrication methods, applications, and challenges

Surface-supported metal–organic framework thin films are receiving increasing attention as a novel form of nanotechnology, which hold great promise for photovoltaics, electronic devices, CO₂ reduction, energy storage, water splitting and membranes.

Selective gas adsorption and fluorescence sensing response of a Zn(ii) metal–organic framework constructed by a mixed-ligand strategy

By means of a mixed-ligand strategy, a novel metal–organic framework was obtained, which remarkably exhibits bi-functional properties, i.e., selective gas adsorption of CO₂ over CH₄ and fluorescence sensing response for nitrobenzene.

UiO-66@SiO2 core–shell microparticles as stationary phases for the separation of small organic molecules

Microparticles decorated with metal–organic frameworks exhibited a unique flow-dependent separation selectivity (FDSS) effect for the isocratic separation of small molecules.

Highly and Stably Water Permeable Thin Film Nanocomposite Membranes Doped with MIL-101 (Cr) Nanoparticles for Reverse Osmosis Application

A hydrophilic, hydrostable porous metal organic framework (MOF) material-MIL-101 (Cr) was successfully doped into the dense selective polyamide (PA) layer on the polysulfone (PS) ultrafiltration (UF) support to prepare a new thin film nanocomposite (TFN) membrane for water desalination. The TFN-MIL-101 (Cr) membranes were characterized by SEM, AFM, XPS, wettability measurement and reverse osmosis (RO) test. The porous structures of MIL-101 (Cr) can establish direct water channels in the dense selective PA layer for water molecules to transport through quickly, leading to the increasing water permeance of membranes. With good compatibility between MIL-101 (Cr) nanoparticles and the PA layer, the lab made TFN-MIL-101 (Cr) membranes integrated tightly and showed a high NaCl salt rejection. MIL-101 (Cr) nanoparticles increased water permeance to 2.2 L/m²·h·bar at 0.05 w/v % concentration, 44% higher than the undoped PA membranes; meanwhile, the NaCl rejection remained higher than 99%. This study experimentally verified the potential use of MIL-101 (Cr) in advanced TFN RO membranes, which can be used in the diversified water purification field.

In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets

A facile in situ synthetic method is developed to synthesize metal sulfide nanoparticles based on 2D M-TCPP (M = Cu, Cd, or Co, TCPP = tetrakis(4-carboxyphenyl)porphyrin)) metal-organic framework nanosheets. The obtained CuS/Cu-TCPP composite nanosheet is used as the active material in photoelectrochemical cells, showing notably increased photocurrent due to the improved exciton separation and charge carrier transport.

Alginate Hydrogel: A Shapeable and Versatile Platform for in Situ Preparation of Metal-Organic Framework-Polymer Composites

This work reports a novel in situ growth approach for incorporating metal-organic framework (MOF) materials into an alginate substrate, which overcomes the challenges of processing MOF particles into specially shaped structures for real industrial applications. The MOF-alginate composites are prepared through the post-treatment of a metal ion cross-linked alginate hydrogel with a MOF ligand solution. MOF particles are well distributed and embedded in and on the surface of the composites. The macroscopic shape of the composite can be designed by controlling the shape of the corresponding hydrogel; thus MOF-alginate beads, fibers, and membranes are obtained. In addition, four different MOF-alginate composites, including HKUST-1-, ZIF-8-, MIL-100(Fe)-, and ZIF-67-alginate, were successfully prepared using different metal ion cross-linked alginate hydrogels. The mechanism of formation is revealed, and the composite is demonstrated to be an effective absorbent for water purification.