Cu-MOF@Pt 3D nanocomposites prepared by one-step wrapping method with peroxidase-like activity for colorimetric detection of glucose

As an alternative to natural enzymes, artificial enzymes based on nanomaterials have attracted a lot of attention owing to their outstanding catalytic activity and high stability as well as low cost. Cu-MOF loaded with platinum nanoparticles (labeled Cu-MOF@Pt) was prepared by simple one-step wrapping method using platinum nanoparticles, copper nitrate trihydrate and 1,3,5-tricarboxybenzene. It was confirmed that Cu-MOF@Pt exhibits peroxidase-like activity, which can quickly catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and produce blue oxidized TMB (oxTMB) in the presence of hydrogen peroxide (H₂O₂). Additionally, steady-state kinetics showed that Cu-MOF@Pt exhibits stronger appetency to TMB and H₂O₂ compared with horseradish peroxidase. Thanks to the peroxidase-like activity of Cu-MOF@Pt, a highly selective colorimetric method for glucose detection has been successfully established, the linear range is 2-15 mM (R² =0.9999) and the Limit of Detection (LOD) is 0.42 mM, with a detection range that meets clinical needs. Moreover, its good intra- and inter-assay precision and excellent stability make the results of glucose detection very reproducible. The detection performance of 90.09% was still maintained at 4 ℃ for 2 months. In conclusion, a new nanocomposite was successfully prepared and its selective detection ability for glucose was proved, which established a good basis for the clinical development of new enzymes for biosensors.

Emerging single atom catalysts in gas sensors

Single atom catalysts (SACs) offer unprecedented opportunities for high-efficiency reactions taking place in many important fields of catalytic processes, electrochemistry, and photoreactions. Due to their maximized atomic utilization and unique electronic and chemical properties, SACs can provide high activity and excellent selectivity for gas adsorption and electron transport, leveraging SACs that enhance the detection sensitivity and selectivity to target gases. In the past few years, SACs including both noble (Pt, Pd, Au, etc.) and non-noble (Mn, Ni, Zn etc.) metals have been demonstrated to be very useful in optimizing sensing performances. However, a comprehensive review on this topic is still missing. Herein, we summarize the synthesis technologies of SACs that are applicable to gas sensors. The electronic and chemical interactions between SACs and host sensing materials, which are crucial to sensor functions, are discussed. Then, we highlight the application progress of various SACs in gas sensors. Prospects in the creation of new sensing materials with emerging SACs and versatile supports are also present. Finally, the challenges and prospects of SACs in the future development of sensors are analyzed.

Palladium decoration directed synthesis of ZIF-8 nanocubes with efficient catalytic activity for nitrobenzene hydrogenation

A palladium precursor (H₂PdCl₄) has been utilized as a novel structure-directing agent for controlling the morphology of ZIF-8. Using reverse micelles as nanoreactors, the Pd/ZIF-8 nanocomposite with a uniform size distribution is obtained. It is revealed that Pd(II) can selectively coordinate with the (100) plane of ZIF-8. As a result, the morphology of ZIF-8 is transformed from rhombic dodecahedral to cubic. After hydrogen treatment, the as-obtained Pd NPs/ZIF-8 nanocubes show efficient catalytic activity for nitrobenzene hydrogenation, which is higher than that of the commercially available Pd/C catalyst.

Construction of a 3D Metal-Organic Framework and Its Composite for Water Remediation via Selective Adsorption and Photocatalytic Degradation of Hazardous Dye

In this work, a new bimetallic Na(I)-Zn(II) metal-organic framework (MOF), formulated as [Na₂Zn₃(btc)₂(μ-HCOO)₂(μ-H₂O)₈] _n (1) (H₃btc = benzene tricarboxylic acid), and its composite (ZnO@1) have been successfully synthesized using solvothermal and mechanochemical solid grinding methods. 1 and ZnO@1 were characterized by diffraction [single-crystal X-ray diffraction (XRD) and powder XRD], spectroscopic (ultraviolet-visible diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy), microscopic (transmission electron microscopy), and thermal (thermogravimetric analysis) methods. The surface area and porosity of 1 were determined using a Brunauer-Emmett-Teller analyzer. Single-crystal diffraction of 1 confirms that Na1 and Zn2 have octahedral coordination environments, whereas Zn1 has a tetrahedral coordination geometry. Topological simplification of 1 shows a 3,6-connected kgd net. Na(I)-Zn(II) MOF (1) is crystallized with slight porosity and exhibits good tendency toward the encapsulation of zinc oxide nanoparticles (ZnO NPs). The photocatalytic behaviors of 1 and its composite (ZnO@1) were investigated over MB dye under sunlight illumination with promising degradation efficiencies of 93.69% for 1 and 97.53% for ZnO@1 in 80 min.

An archetype of the electron-unobstructed core-shell composite with inherent selectivity: conductive metal-organic frameworks encapsulated with metal nanoparticles

The acquisition of monodisperse metal nanoparticles covered by conductive metal-organic frameworks (cMOFs) is an archetype of an electron-unobstructed core-shell composite, valued for its potential electrocatalytic ability and selectivity enhancement. In this work, Pt@cMOF composites with direct interfaces showed better performance in the oxygen reduction reaction than composites with indirect interfaces or with lower electroconductivity shells. This composite was proved to exhibit the ability to expedite electron transfer with different thicknesses of electrode materials. The detailed mechanism was studied by exploring the conductivity of shell materials, interfaces between cores and shells, and the surface electronic structure of the nanoparticles. We also report reaction selectivity from the inherent porous shells in the selective reduction of cinnamyl alcohol.

Charge Separation by Creating Band Bending in Metal-Organic Frameworks for Improved Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs) have been intensively studied as a class of semiconductor-like materials in photocatalysis. However, band bending, which plays a crucial role in semiconductor photocatalysis, has not yet been demonstrated in MOF photocatalysts. Herein, a representative MOF, MIL-125-NH₂ , is integrated with the metal oxides (MoO₃ and V₂ O₅ ) that feature appropriate work functions and energy levels to afford the corresponding MOF composites. Surface photovoltage results demonstrate band bending in the MOF composites, which gives rise to the built-in electric field of MIL-125-NH₂ , boosting the charge separation. As a result, the MOF composites present 56 and 42 times higher activities, respectively, compared to the pristine MOF for photocatalytic H₂ production. Upon depositing Pt onto the MOF, ∼6 times higher activity is achieved. This work illustrates band bending of MOFs for the first time, supporting their semiconductor-like nature, which would greatly promote MOF photocatalysis.

The Increasing Number of Electron Reservoirs in Nonporous, High-Conducting Coordination Polymers Cux BHT (x = 3, 4, and 5, BHT = Benzenehexathiol) for Improved Faradaic Capacitance

Although asymmetric supercapacitors (ASCs) can achieve high energy density, the lifespan and power density are severely suppressed due to the low conductivity of using pseudocapacitive or battery-type electrode materials. Recently, nonporous conductive coordination polymers (c-CPs) have sparked interests in supercapacitors. However, their performance is expected to be limited by the nonporous features, low specific surface area and absence of ion-diffusion channels. Here, it is demonstrated that the capacity of nonporous CPs will be significantly enhanced by maximizing the number of faradaic redox sites in their structures through a comparative investigation on three highly conductive nonporous c-CPs, Cu_x BHT(x = 3, 4, 5.5). They show excellent capacitance of 312.1 F g^-1 (374.5 C g^-1 ) (Cu₃ BHT), 186.7 F g^-1 (224.0 C g^-1 ) (Cu₄ BHT) and 89.2 F g^-1 (107.0 C g^-1 ) (Cu_5.5 BHT) at 0.5 A g^-1 in a sequence related to the number of electron storage units in structures and outstanding rate performance and cycle stability. Furthermore, the constructed Cu₃ BHT//MnO₂ ASC device exhibits capacity retention of 92% (after 1500 cycles at 3 A g^-1 ) and delivers a high energy density of 39.1 Wh kg^-1 at power density of 549.6 W kg^-1 within a large working potential window of 0-2.2 V.

Improved performance of the pyrimidine-modified porous In-MOF and an in situ prepared composite Ag@In-MOF material

A stable porous In-MOF 1 was prepared for the first time via an asymmetric N,O-containing (2-pyrimidin-5-yl)terephthalic acid (H₂L). It was found that the 1,4-benzenedicarboxylate anions (bdc^2-) were formed in the synthesis process of 1. Thus, another new isomorphic In-MOF 2 was formed by employing the H₂bdc ligand in the synthesis process of 1. More importantly, when adding AgNO₃ in the synthesis process of 1 and 2, only composite Ag@1 was obtained via the in situ reduction of Ag(I) to Ag NPs without additional reducing agent. MOF 1 and Ag@1 had great sorption capacity; in particular, 1 had remarkable dynamic selectivity for C₂H₂/CH₄ and CO₂/CH₄, and they were also efficient catalysts for fixing CO₂ and epoxides. It is hoped that this work may supply an effective strategy to build stable MOFs and composite Ag@MOF materials with excellent multifunctional applications.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Metal Nanocluster-Metal Organic Framework-Polymer Hybrid Nanomaterials for Improved Hydrogen Detection

The development of hydrogen sensors is of paramount importance for timely leak detection and remains a crucial unmet need. Palladium-based materials, well known as hydrogen sensors, still suffer from poisoning and deactivation. Here, a hybrid hydrogen sensor consisting of a Pd nanocluster (NC) film, a metal-organic framework (MOF), and a polymer, are proposed. The polymer coating, as a protection layer, endows the sensor with excellent H₂ selectivity and CO-poisoning resistance. The MOF serves as an interface layer between the Pd NC film and the polymer layer, which alters the nature of the interaction with hydrogen and leads to significant sensing performance improvements, owing to the interfacial electronic coupling between Pd NCs and the MOF. The strategy overcomes the shortcomings of retarded response speed and degraded sensitivity induced by the polymer coating of a Pd NC film-polymer hybrid system. This is the first exhibition of a hydrogen-sensing enhancement mechanism achieved by engineering the electronic coupling between Pd and a MOF. The work establishes a deep understanding of the hydrogen-sensing enhancement mechanism at the nanoscale and provides a feasible strategy to engineer next-generation gas-sensing nanodevices with superior sensing figures of merit via hybrid material systems.

Controllable Enhanced Ru(bpy)32+ Electrochemiluminescence Detection Systems Based on Eu@MOF253@AuNPs/GCE for the Sensitive Detection of Carbaryl in Food

In this study, an electrochemiluminescence detection system for the sensitive detection of carbaryl was constructed based on the dual identification of Eu@MOF253, which has a recognition effect on carbaryl, and the electrochemiluminescence system of Ru(bpy)₃²⁺/S₂O₈^2-, which can react with carbaryl in a redox reaction. This method not only overcame the weakness of the electrochemiluminescence instability of the Ru(bpy)₃²⁺/S₂O₈^2- system but also changed the sensitivity of the sensing detection system to the target by adjusting the concentration of Ru(bpy)₃²⁺ and then proposed a detection strategy with a controllable detection range. After analyzing the electrochemiluminescence signal change mechanism of this system and optimizing the detection conditions, it was concluded that the strategy has good linear detection of carbaryl in the range of 1-1000 and 0.02-0.3 μg L^-1, and the detection limits were 0.058 and 0.014 μg L^-1. Finally, the strategy was also successfully applied to the detection of actual samples.

Construction of an ECL Detection Platform for Sensitive Detection of Carbaryl Based on an Eu3+-Functionalized Metal–Organic Framework Encapsulated with Nanogold

In this work, an Eu3+-MOF-253@Au electrochemiluminescence sensor was successfully constructed for the first time by encapsulating nanogold in the metal–organic frameworks (MOFs) backbone and pore channels, and assembling Eu3+ on the MOF backbone. Firstly, the introduction of nanogold overcomes the weakness of MOFs, which was difficult to achieve, and enhances its catalytic performance, followed by the modification of Eu3+ to confer the electrochemiluminescence performance and the function of target detection on the sensor. Moreover, carbaryl was placed in an alkaline working solution to enhance the intensity of electrochemiluminescence signal, as well as to promote the hydrolysis of carbaryl into 1-naphthol, which caused the burst of Eu3+-MOF-253@Au electrochemiluminescence sensor, thereby achieving the sensitive detection of carbaryl. On this basis, the electrochemiluminescence detection conditions were optimized, the performance was analyzed, and finally it was successfully used for the detection of carbaryl with good linearity in the range of 0.2–200 μg L−1 and a low detection limit (0.14 μg L−1).

Smart Tetraphenylethene-Based Luminescent Metal-Organic Frameworks with Amide-Assisted Thermofluorochromics and Piezofluorochromics

Luminescent metal-organic frameworks (MOFs) are appealing for the design of smart responsive materials, whereas aggregation-induced emission (AIE) fluorophores with twisted molecular rotor structure provide exciting opportunities to construct MOFs with new topology and responsiveness. Herein, it is reported that elongating AIE rotor ligands can render the newly formed AIE MOF (ZnETTB) (ETTB = 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-3,5-dicarboxylic acid))) with more elasticity, more control for intramolecular motion, and specific amide-sensing capability. ZnETTB shows specific host-guest interaction with amide, where N,N-diethylformamide (DEF), as an example, is anchored through CH···O and CH···π bonds with Zn cluster and ETTB^8- ligand, respectively. DEF anchoring reduces both the distortion level and the intramolecular motions of ETTB^8- ligand to lead a blueshifted and intensified emission for DEF ∈ ZnETTB. Moreover, amide anchoring also affords the DEF ∈ ZnETTB with the excellent thermofluorochromic behavior, and further increases the piezofluorochromic sensitivity at low-pressure ranges on the basis of its elastic framework. This work is one of the rare examples of amide-responsive smart materials, which shall shed new lights on design of smart MOFs with twisted AIE rotors for further sensing and detection applications.

Metal-Organic Framework Surface Functionalization Enhancing the Activity and Stability of Palladium Nanoparticles for Carbon-Halogen Bond Activation

Supported metal nanocatalyst is one of the efficient tools for organic transformations. However, catalyst deactivation caused by the migration, aggregation, and leaching of active metal species in the reaction process remains challenging. Herein, a metal-organic framework (MOF), MIL-101, was employed to covalently graft the PPh₃ ligand on its surface and then supported palladium nanoparticles (Pd NPs), affording Pd/MIL-101-PPh₃. A variety of spectral characterizations and DFT calculation reveal that there is an electron-donating effect of the MOF surface PPh₃ toward Pd NPs, which markedly boosts the activation of the carbon-halogen bond in aryl halides. Consequently, Pd/MIL-101-PPh₃ exhibits excellent activity for the three-component reaction of 2-iodoaniline, CO₂, and isocyanide, as well as Suzuki-Miyaura and Heck coupling reactions, far exceeding amino-functionalized Pd/MIL-101-NH₂, naked Pd/MIL-101, and other commercial-supported Pd catalysts. Furthermore, Pd/MIL-101-PPh₃ can also frustrate the migration, aggregation, and leaching of reactive Pd species in the reaction process due to the molecular fence effect generated by MOF surface functionalization.

Reticular Nanoscience: Bottom-Up Assembly Nanotechnology

The chemistry of metal-organic and covalent organic frameworks (MOFs and COFs) is perhaps the most diverse and inclusive among the chemical sciences, and yet it can be radically expanded by blending it with nanotechnology. The result is reticular nanoscience, an area of reticular chemistry that has an immense potential in virtually any technological field. In this perspective, we explore the extension of such an interdisciplinary reach by surveying the explored and unexplored possibilities that framework nanoparticles can offer. We localize these unique nanosized reticular materials at the juncture between the molecular and the macroscopic worlds, and describe the resulting synthetic and analytical chemistry, which is fundamentally different from conventional frameworks. Such differences are mirrored in the properties that reticular nanoparticles exhibit, which we described while referring to the present state-of-the-art and future promising applications in medicine, catalysis, energy-related applications, and sensors. Finally, the bottom-up approach of reticular nanoscience, inspired by nature, is brought to its full extension by introducing the concept of augmented reticular chemistry. Its approach departs from a single-particle scale to reach higher mesoscopic and even macroscopic dimensions, where framework nanoparticles become building units themselves and the resulting supermaterials approach new levels of sophistication of structures and properties.

Advanced Metal–Organic Frameworks-Based Catalysts in Electrochemical Sensors

Developing efficient catalysts is vital for the application of electrochemical sensors. Metal–organic frameworks (MOFs), with high porosity, large specific surface area, good conductivity, and biocompatibility, have been widely used in catalysis, adsorption, separation, and energy storage applications. In this invited review, the recent advances of a novel MOF-based catalysts in electrochemical sensors are summarized. Based on the structure–activity–performance relationship of MOF-based catalysts, their mechanism as electrochemical sensor, including metal cations, synthetic ligands, and structure, are introduced. Then, the MOF-based composites are successively divided into metal-based, carbon-based, and other MOF-based composites. Furthermore, their application in environmental monitoring, food safety control, and clinical diagnosis is discussed. The perspective and challenges for advanced MOF-based composites are proposed at the end of this contribution.

Mixed-Linker Strategy for the Construction of Metal-Organic Framework Combined with Dyes toward Alcohol Detection

Herein, a N-rich metal-organic framework (MOF) with four kinds of cages, Zn₄(ade)₂(TCA)₂(H₂O) (NENU-1000, Hade = adenine, H₃TCA = 4,4',4″-tricarboxytriphenylamine, NENU = Northeast Normal University), was prepared by the mixed-ligand strategy. Cationic dyes can be selectively absorbed by NENU-1000 at proper concentrations, but not neutral and anionic dyes, which perhaps can be assigned to the N-rich neutral framework of NENU-1000. When NENU-1000 was introduced to a relatively lower concentration of cationic dye solutions (e.g., rhodamine B or basic red 2), the colors of these systems faded quickly. Furthermore, the faded solutions can be used for the detection of methanol and other small alcohol molecules with either the naked eye or common UV-vis spectra. The effect of the length of carbon chain, the position of the -OH group, and the number of the hydroxyl group of the alcohols was explored for the color development rate. In addition, the performance of NENU-1000 in iodine sorption and release was also studied.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Rational Functionalization of UiO-66 with Pd Nanoparticles: Synthesis and In Situ Fourier-Transform Infrared Monitoring

Functionalization of metal-organic frameworks (MOFs) with noble metal nanoparticles (NPs) is a challenging task. Conventional impregnation by metals often leads to agglomerates on the surface of MOF crystals. Functional groups on linkers interact with metal precursors and promote the homogeneous distribution of NPs in the pores of MOFs, but their uncontrolled localization can block channels and thus hinder mass transport. To overcome this problem, we created nucleation centers only in the defective pores of the UiO-66 MOF via the postsynthesis exchange. First, we have introduced defects into UiO-66 using benzoic acid as a modulator. Second, the modulator was exchanged for amino-benzoic acid. As a result, amino groups have decorated mainly the defective pores and attracted the Pd precursor after impregnation. The interaction of the metal precursor with amino groups and the growth of NPs were monitored by in situ infrared spectroscopy. Three processes were distinguished: the gaseous HCl release, NH₂ reactivation, and growth of extended Pd surfaces. Uniform Pd NPs were located in the pores because of the homogeneous distribution of the precursor and pore diffusion-limited nucleation rate. Our work demonstrates an alternative approach of controlled Pd incorporation into UiO-66 that is of great importance for the rational design of heterogeneous catalysts.

Best Practices in the Characterization of MOF@MSN Composites

Research on permanently porous nanomaterials has gripped the attention of materials chemists for decades. Mesoporous silica nanoparticles (MSNs) and metal-organic frameworks (MOFs) are two of the most studied classes of materials in this field. Recently, explorations into embedding MOFs within the mesopores of MSNs have aimed to create composites that are greater than the sum of their parts. While initial progress has been promising, it has become clear that the characterization of these MOF@MSN composite materials represents a significant challenge that is often overlooked, leading to an unfortunate ambiguity in the field. The greatest difficulty lies in determining whether the product of a synthesis is simply a physical mixture of the two materials or truly the targeted composite, with MOF exclusively crystallized in the pores or on the surfaces of the MSN. This challenge is aggravated by the dramatically different porosity and composition of the components, often resulting in ambiguous information from common characterization techniques. This Viewpoint will address this challenge by calling attention to the mentioned issues and proposing a standardized approach to characterizing these materials. In particular, the use of powder X-ray diffraction, gas physisorption, and electron microscopy with systematic control experiments and data analysis is outlined. This approach can provide the information needed to clearly validate the architecture of an apparent MOF@MSN composite.

Metal organic frameworks for electrochemical sensor applications: A review

Metal-organic frameworks (MOFs) are broadly known as porous coordination polymers, synthesized by metal-based nodes and organic linkers. MOFs are used in various fields like catalysis, energy storage, sensors, drug delivery etc., due to their versatile properties (tailorable pore size, high surface area, and exposed active sites). This review presents a detailed discussion of MOFs as an electrochemical sensor and their enhancement in the selectivity and sensitivity of the sensor. These sensors are used for the detection of heavy metal ions like Cd²⁺, Pb²⁺, Hg²⁺, and Cu²⁺ from groundwater. Various types of organic pollutants are also detected from the water bodies using MOFs. Furthermore, electrochemical sensing of antibiotics, phenolic compounds, and pesticides has been explored. In addition to this, there is also a detailed discussion of metal nano-particles and metal-oxide based composites which can sense various compounds like glucose, amino acids, uric acid etc. The review will be helpful for young researchers, and an inspiration to future research as challenges and future opportunities of MOF-based electrochemical sensors are also reported.