Highly Strained Au-Ag-Pd Alloy Nanowires for Boosted Electrooxidation of Biomass-Derived Alcohols

Although strain engineering is effective in boosting the activities of noble metal catalysts, it remains desirable to construct fully strained catalysts to push the activity to even higher levels. Herein, we report a novel route to strong lattice strains of a Pd-based catalyst by radial growth of a Pd-rich phase on Au-Ag alloy nanowires that are no thicker than 1.5 nm. It creates not only tensile strains in the Pd-rich sheath due to the core-sheath lattice mismatch but also distortion and twinning of the lattice, producing nonhomogeneous local strains as hotspots for the catalysis. Toward the electrochemical oxidation of biomass-derived alcohols including ethanol, ethylene glycol, and glycerol, the highly strained nanowires outperformed their less strained counterparts and reached up to 13.6, 18.2, and 11.1 A mg_Pd^-1, respectively. This strain engineering strategy may open new avenues to highly efficient catalysts for direct alcohol fuel cells and many other applications.

Highly Active and Stable Palladium Single-Atom Catalyst Achieved by a Thermal Atomization Strategy on an SBA-15 Molecular Sieve for Semi-Hydrogenation Reactions

Single-atom catalysts (SACs) have great potential to revolutionize heterogeneous catalysis, enabling fast and direct construction of desired products. Given their notable promise, a general and scalable strategy to access these catalyst systems is highly desirable. Herein, we describe a straightforward and efficient thermal atomization strategy to create atomically dispersed palladium atoms anchored on a nitrogen-doped carbon shell over an SBA-15 support. Their presence was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The nitrogen-containing carbon shells provide atomic diffusion sites for anchoring palladium atoms emitted from palladium nanoparticles. This catalyst showed exceptional efficiency in selective hydrogenation of phenylacetylene and other types of alkynes. Importantly, it showed excellent stability, recyclability, and sintering-resistant ability. This approach can be scaled up with comparable catalytic activity. We anticipate that this work may lay the foundation for rapid access to high-quality SACs that are amenable to large-scale production for industrial applications.

Advanced Platinum-Based Oxygen Reduction Electrocatalysts for Fuel Cells

ConspectusFuel cells are among the cutting-edge energy technologies. Their commercial development is still hindered by noble platinum (Pt) catalysts for the oxygen reduction reaction (ORR) at the cathode, which not only determine the energy conversion efficiency and service life but also are closely related to the cost and broad application of fuel cells. Given the bright and enormous future of fuel cells, ORR catalysts should possess highly efficient performance yet meet the acceptable Pt costs for large-scale application. Extensive efforts are concentrated on the optimization of Pt-based nanostructures and upgradation of functional carriers to achieve the low-cost and high-activity Pt-based catalysts. By improving the Pt utilization and accessible surface, reducing Pt consumption and catalyst costs, accelerating mass exchange and electron transfer, alleviating the corrosion and agglomeration of carriers and Pt, accompanying with the assistance of robust yet effective functional supports, the service level and life of Pt-based electrocatalysts would be significantly improved and fuel cells could get into commercial market covering broader applications.In this Account, we focus on the recent development of Pt-based catalysts to figure out the problems associated with ORR catalysts in fuel cells. Recent development of Pt-based catalysts is discussed in different stages: (1) multiscale development of Pt-based nanostructures; (2) multielement regulation over Pt-based alloy composition; (3) upgradation of carbon and noncarbon support architectures; (4) development of integrated Pt-based catalysts for fuel cells. Finally, we propose some future issues (such as reaction mechanism, dynamic evolutions, and structure-activity relationship) for Pt-based catalysts, which mainly involve the preparation strategy of Pt-integrated catalysts (combination of Pt nanostructures with nanocarbons), performance evaluation (standard measurement protocols, laboratory-level rotating disk electrode (RDE) measurements, application-level membrane electrode assembly (MEA) service test), advanced interpretation techniques (spectroscopy, electron microscopy, and in situ monitoring), and cutting-edge simulation/calculations and artificial intelligence (simulation, calculations, machine learning, big data screening). This Account calls for the comprehensive development of multiscale, multicomponent, and high-entropy Pt-based alloy nanostructures, and novel and stable carriers, which provide more available options for rational design of low-cost and high-performance Pt-integrated ORR catalysts. More importantly, it will give an in-depth understanding of the reaction mechanism, dynamic development, and structure-performance relationship for Pt-based catalysts in fuel cells and related energy technologies.

Pd nanoparticles loaded onto a TiO2–C heterostructure via a photochemical strategy for efficient oxygen reduction reaction

In this paper, we successfully reduced Pd to TiO2–C heterostructure (Pd/TiO2–C catalyst) by photochemical reduction method. The directional transfer of electrons from TiO2–C to Pd catalyst strengthens MA and improves the durability of ORR.

PtPd hollow nanocubes with enhanced alloy effect and active facets for efficient methanol oxidation reaction

An alternating-reduction approach is developed to fabricate PtPd hollow nanocubes with highly catalytically-favoured {100} facets and enhanced alloy effect for efficient methanol oxidation reaction.

Oxygenated functional group-engaged electroless deposition of ligand-free silver nanoparticles on porous carbon for efficient electrochemical non-enzymatic H2O2 detection

The construction of metal-carbon nanostructures with enhanced performances using traditional methods, such as pyrolysis, photolysis, impregnation-reduction, etc., generally requires additional energy input, reducing agents and capping ligands, which inevitably increase the manufacturing cost and environmental pollution. Herein, a novel one-step substrate-induced electroless deposition (SIED) strategy is developed to synthesize ligand-free Ag NPs supported on porous carbon (PC) (Ag/PC). The PC matrix enriched with oxygenated functional groups has a low work function and thus a low redox potential compared to that of Ag+ ions, which induces the auto-reduction of Ag+ ions to Ag NPs. The as-synthesized Ag/PC-6 modified electrode can be used as an excellent nonenzymatic H2O2 sensor with a broad linear range of 0.001-20 mM, a low detection limit of 0.729 μM (S/N = 3), and a high response sensitivity of 226.9 μA mM-1 cm-2, outperforming most of the reported sensor materials. Moreover, this electrode can be applied to detect trace amounts of H2O2 in juice and milk samples below the permitted residual level in food packaging and the recovery of H2O2 is 99.6% in blood serum (10%) with good reproducibility. This study proposes an efficient approach for synthesizing a highly active supported Ag electrocatalyst, which shows significant potential for practical applications.

Selective Hydrogenation on a Highly Active Single-Atom Catalyst of Palladium Dispersed on Ceria Nanorods by Defect Engineering

Single-atom catalysis represents a new frontier that integrates the merits of homogeneous and heterogeneous catalysis to afford exceptional atom efficiency, activity, and selectivity for a range of catalytic systems. Herein we describe a simple defect engineering strategy to construct an atomically dispersed palladium catalyst (Pd^δ+, 0 < δ < 2) by anchoring the palladium atoms on oxygen vacancies created in CeO₂ nanorods. This was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The as-prepared catalyst showed exceptional catalytic performance in the hydrogenation of styrene (99% conversion, TOF of 2410 h^-1), cinnamaldehyde (99% conversion, 99% selectivity, TOF of 968 h^-1), as well as oxidation of triethoxysilane (99% conversion, 79 selectivity, TOF of 10 000 h^-1). This single-atom palladium catalyst can be reused at least five times with negligible activity decay. The palladium atoms retained their dispersion on the support at the atomic level after thermal stability testing in Ar at 773 K. Most importantly, this synthetic method can be scaled up while maintaining catalytic performance. We anticipate that this method will expedite access to single-atom catalysts with high activity and excellent resistance to sintering, significantly impacting the performance of this class of catalysts.

Computational Methods in Heterogeneous Catalysis

The unprecedented ability of computations to probe atomic-level details of catalytic systems holds immense promise for the fundamentals-based bottom-up design of novel heterogeneous catalysts, which are at the heart of the chemical and energy sectors of industry. Here, we critically analyze recent advances in computational heterogeneous catalysis. First, we will survey the progress in electronic structure methods and atomistic catalyst models employed, which have enabled the catalysis community to build increasingly intricate, realistic, and accurate models of the active sites of supported transition-metal catalysts. We then review developments in microkinetic modeling, specifically mean-field microkinetic models and kinetic Monte Carlo simulations, which bridge the gap between nanoscale computational insights and macroscale experimental kinetics data with increasing fidelity. We finally review the advancements in theoretical methods for accelerating catalyst design and discovery. Throughout the review, we provide ample examples of applications, discuss remaining challenges, and provide our outlook for the near future.

Gold nanobipyramid-embedded silver-platinum hollow nanostructures for monitoring stepwise reduction and oxidation reactions

Metal hollow nanostructures based on gold nanobipyramids (Au NBPs) are of great interest for the combination of tunable plasmonic resonances and excellent physicochemical properties. Based on the core-shell Au NBP@Ag nanorods with desired sizes, herein we reported the synthesis and growth mechanism of Au NBP-embedded AgPt hollow nanostructures with tunable thickness and size. The Au NBP@AgPt nanoframes were obtained at lower temperature, in which cetyltrimethylammonium bromine (CTAB) was applied as a capping agent to guide the deposition of Pt atoms on the edges and corners of Au NBPs@Ag nanorods. With the increase of reaction temperature, the Au NBP@AgPt nanoframes convert into nanocages due to the atomic migration to the surfaces. The surface plasmon resonance of the Au NBP@AgPt hollow nanostructure shifts from red to blue, which is ascribed to the changes in coverage area and location site of the AgPt alloy. When CTAB was replaced by cetyltrimethylammonium chloride (CTAC), Au NBP@AgPt nanocages dominate the product. The surface roughness and thickness of the nanocages can be controlled by the temperature and the amount of Pt precursor. Moreover, Au NBP@AgPt hollow nanostructures show excellent surface-enhanced Raman scattering and exhibit remarkable stability in harsh environments. Taking into account the advantages of the plasmonic property (Au NBPs), catalytic activity (Pt) and plasmon-enhanced signal (Ag), the Au NBP@AgPt hollow nanostructures are a promising candidate for technological applications in catalytic reactions.

Nanocrystals of platinum-group metals as peroxidase mimics for in vitro diagnostics

Peroxidase mimics of nanoscale materials as alternatives to natural peroxidases have found widespread uses in biomedicine. Among various types of peroxidase mimics, platinum-group metal (PGM) nanocrystals have drawn considerable attention in recent years due to their superior properties. Particularly, PGM nanocrystals display high catalytic efficiencies, allow for facile surface modifications, and possess excellent stabilities. This feature article summarizes our recent work on development of PGM nanocrystals as peroxidase mimics and exploration of their applications in in vitro diagnostics. We begin with a brief introduction to controlled synthesis of PGM nanocrystals in solution phase. We then elaborate on a variety of physicochemical parameters that can be carefully tuned to optimize the peroxidase-like properties of PGM nanocrystals. Then, we highlight the applications of PGM nanocrystals in different in vitro diagnostic platforms. We conclude this article with personal perspectives on future research directions in this emerging field, where challenges and opportunities are remarked.

Atomic-Level Manipulations in Oxides and Alloys for Electrocatalysis of Oxygen Evolution and Reduction

As chemical reactions and charge-transfer simultaneously occur on the catalyst surface during electrocatalysis, numerous studies have been carried out to attain an in-depth understanding on the correlation among the surface structure and composition, the electrical transport, and the overall catalytic activity. Compared with other catalysis reactions, a relatively larger activation barrier for oxygen evolution/reduction reactions (OER/ORR), where multiple electron transfers are involved, is noted. Many works over the past decade thus have been focused on the atomic-scale control of the surface structure and the precise identification of surface composition change in catalyst materials to achieve better conversion efficiency. In particular, recent advances in various analytical tools have enabled noteworthy findings of unexpected catalytic features at atomic resolution, providing significant insights toward reducing the activation barriers and subsequently improving the catalytic performance. In addition to summarizing important surface issues, including lattice defects, related to the OER and ORR in this Review, we present the current status and discuss future perspectives of oxide- and alloy-based catalysts in terms of atomic-scale observation and manipulation.

Facile Room-Temperature Synthesis of a Highly Active and Robust Single-Crystal Pt Multipod Catalyst for Oxygen Reduction Reaction

Economical production of highly active and robust Pt catalysts on a large scale is vital to the broad commercialization of polymer electrolyte membrane fuel cells. Here, we report a low-cost, one-pot process for large-scale synthesis of single-crystal Pt multipods with abundant high-index facets, in an aqueous solution without any template or surfactant. A composite consisting of the Pt multipods (40 wt %) and carbon displays a specific activity of 0.242 mA/cm² and a mass activity of 0.109 A/mg at 0.9 V (versus a reversible hydrogen electrode) for oxygen reduction reaction, corresponding to ∼124% and ∼100% enhancement compared with those of the state-of-the-art commercial Pt/C catalyst (0.108 mA/cm² and 0.054 A/mg). The single-crystal Pt multipods also show excellent stability when tested for 4500 cycles in a potential range of 0.6-1.1 V and another 2000 cycles in 0-1.2 V. More importantly, the superior performance of the Pt multipods/C catalyst is also demonstrated in a membrane electrode assembly (MEA), achieving a power density of 774 mW/cm² (1.29 A/cm²) at 0.6 V and a peak power density of ∼1 W/cm², representing 34% and 20% enhancement compared with those of a MEA based on the state-of-the-art commercial Pt/C catalyst (576 and 834 mW/cm²).

Recent Progress in Engineering the Atomic and Electronic Structure of Electrocatalysts via Cation Exchange Reactions

In the past few decades, tremendous advances have been made in electrocatalysis due to the rational design of electrocatalysts at the nanoscale level. Further development requires engineering electrocatalysts at the atomic level, which is a grand challenge. Here, the recent advances in cation exchange strategy, which is a powerful tool for fine-tuning atomic structure of electrocatalysts via surface faceting, heteroatom doping, defects formation, and strain modulation, are the main focus. Proper atomic structure engineering effectively adjusts the electronic structure, and thus enhances the electronic conductivity and facilitates the adsorption/desorption of reaction intermediates. By virtue, the cation exchange strategy greatly boosts the intrinsic and apparent activities of electrocatalysts and shows a great potential toward design of new energy conversion devices, such as water splitting devices and metal-air batteries. It is believed that cation exchange offers new insights and opportunities for the rational design of a new generation of electrocatalysts.

Phase-Selective Epitaxial Growth of Heterophase Nanostructures on Unconventional 2H-Pd Nanoparticles

Heterostructured, including heterophase, noble-metal nanomaterials have attracted much interest due to their promising applications in diverse fields. However, great challenges still remain in the rational synthesis of well-defined noble-metal heterophase nanostructures. Herein, we report the preparation of Pd nanoparticles with an unconventional hexagonal close-packed (2H type) phase, referred to as 2H-Pd nanoparticles, via a controlled phase transformation of amorphous Pd nanoparticles. Impressively, by using the 2H-Pd nanoparticles as seeds, Au nanomaterials with different crystal phases epitaxially grow on the specific exposed facets of the 2H-Pd, i.e., face-centered cubic (fcc) Au (fcc-Au) on the (002)_h facets of 2H-Pd while 2H-Au on the other exposed facets, to achieve well-defined fcc-2H-fcc heterophase Pd@Au core-shell nanorods. Moreover, through such unique facet-directed crystal-phase-selective epitaxial growth, a series of unconventional fcc-2H-fcc heterophase core-shell nanostructures, including Pd@Ag, Pd@Pt, Pd@PtNi, and Pd@PtCo, have also been prepared. Impressively, the fcc-2H-fcc heterophase Pd@Au nanorods show excellent performance toward the electrochemical carbon dioxide reduction reaction (CO₂RR) for production of carbon monoxide with Faradaic efficiencies of over 90% in an exceptionally wide applied potential window from -0.9 to -0.4 V (versus the reversible hydrogen electrode), which is among the best reported CO₂RR catalysts in H-type electrochemical cells.

Intermetallic PtCu Nanoframes as Efficient Oxygen Reduction Electrocatalysts

Nanoframe alloy structures represent a class of high-performance catalysts for the oxygen reduction reaction (ORR), owing to their high active surface area, efficient molecular accessibility, and nanoconfinement effect. However, structural and chemical instabilities of nanoframes remain an important challenge. Here, we report the synthesis of PtCu nanoframes constructed with an atomically ordered intermetallic structure (O-PtCuNF/C) showing high ORR activity, durability, and chemical stability. We rationally designed the O-PtCuNF/C catalyst by combining theoretical composition predictions with a silica-coating-mediated synthesis. The O-PtCuNF/C combines intensified strain and ligand effects from the intermetallic PtCu L1₁ structure and advantages of the nanoframes, resulting in superior ORR activity to disordered alloy PtCu nanoframes (D-PtCuNF/C) and commercial Pt/C catalysts. Importantly, the O-PtCuNF/C showed the highest ORR mass activity among PtCu-based catalysts. Furthermore, the O-PtCuNF/C exhibited higher ORR durability and far less etching of constituent atoms than D-PtCuNF/C and Pt/C, attesting to the chemically stable nature of the intermetallic structure.

One-Pot Synthesis of PtNi Alloy Nanoparticle-Supported Multiwalled Carbon Nanotubes in an Ionic Liquid Using a Staircase Heating Process

High-performance PtNi alloy nanoparticle-supported multiwalled carbon nanotube composite (PtNi/MWCNT) electrocatalysts can be prepared via one-pot preparation for oxygen reduction reaction. This route of preparation utilizes the pyrolytic decomposition of metal precursors, such as Pt(acac)₂ with Ni precursors, nickel bis(trifluoromethanesulfonyl)amide (Ni[Tf₂N]₂) or nickel acetylacetonate (Ni(acac)₂), in an ionic liquid (IL), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)amide ([N_1,1,1,3][Tf₂N]). Currently, there is insufficient information concerning the effect of difference in preparation conditions on the formation mechanism and catalytic activity of PtNi/MWCNT. In this article, a staircase heating process was used to investigate the PtNi alloy nanoparticle formation mechanism and catalytic activity of the resulting PtNi/MWCNT. We found that the alloy formation process, composition, and crystal structure, which directly affect the electrocatalytic activity, strongly depended on the Ni precursor species and heating process. The catalytic performance of certain PtNi/MWCNTs collected during the staircase heating process was better than that of PtNi/MWCNTs produced via the conventional heating process.

Fe-MOF-Derived Efficient ORR/OER Bifunctional Electrocatalyst for Rechargeable Zinc-Air Batteries

The construction of an efficient oxygen reduction reaction and oxygen evolution reaction (ORR/OER) bifunctional electrocatalyst is of great significance but still remains a giant challenge for high-performance metal-air batteries. In this study, uniform FeS/Fe₃C nanoparticles embedded in a porous N,S-dual doped carbon honeycomb-like composite (abbr. FeS/Fe₃C@NS-C-900) have been conveniently fabricated by pyrolysis of a single-crystal Fe-MOF, which has a low potential gap ΔE of ca. 0.72 V, a competitive power density of 90.9 mW/cm², a specific capacity as high as 750 mAh/g_Zn, and excellent cycling stabilities over 865 h (1730 cycles) at 2 mA/cm² when applied as a cathode material for rechargeable zinc-air batteries. In addition, the two series-linked Zn-air batteries successfully powered a 2.4 V LED light as a real power source. The efficient ORR/OER bifunctional electrocatalytic activity and long-term durability of the obtained composite might be attributed to the characteristic honeycomb-like porous structure with sufficient accessible active sites, the synergistic effect of FeS and Fe₃C, and the N,S codoped porous carbon, which provides a promising application potential for portable electronic Zn-air battery related devices.

The impact of synthetic method on the catalytic application of intermetallic nanoparticles

Intermetallic alloy nanocrystals have emerged as a promising next generation of nanocatalyst, largely due to their promise of surface tunability. Atomic control of the geometric and electronic structure of the nanoparticle surface offers a precise command of the catalytic surface, with the potential for creating homogeneous active sites that extend over the entire nanoparticle. Realizing this promise, however, has been limited by synthetic difficulties, imparted by differences in parent metal crystal structure, reduction potential, and atomic size. Further, little attention has been paid to the impact of synthetic method on catalytic application. In this review, we seek to connect the two, organizing the current synthesis methods and catalytic scope of intermetallic nanoparticles and suggesting areas where more work is needed. Such analysis should help to guide future intermetallic nanoparticle development, with the ultimate goal of generating precisely controlled nanocatalysts tailored to catalysis.

Defect-Rich Copper-doped Ruthenium Hollow Nanoparticles for Efficient Hydrogen Evolution Electrocatalysis in Alkaline Electrolyte

It is of great importance to develop highly efficient and stable Pt-free catalysts for electrochemical hydrogen generation from water electrolysis. Here, monodisperse 7.5 nm copper-doped ruthenium hollow nanoparticles (NPs) with abundant defects and amorphous/crystalline hetero-phases were prepared and employed as efficient hydrogen evolution electrocatalysts in alkaline electrolyte. Specifically, these NPs only require a low overpotential of 25 mV to achieve a current density of 10 mA cm^-2 in 1.0 M KOH and show acceptable stability after 2000 potential cycles, which represents one of the best Ru-based electrocatalysts for hydrogen evolution. Mechanism analysis indicates that Cu incorporation can modify the electronic structure of Ru shell, thereby optimizing the energy barrier for water adsorption and dissociation processes or H adsorption/desorption. Cu doping paired with the defect-rich and highly open hollow structure of the NPs greatly enhances hydrogen evolution activity.

Engineering the electronic and strained interface for high activity of PdMcore@Ptmonolayer electrocatalysts for oxygen reduction reaction

Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level, which is important for designing electrocatalysts with high activity and durability. Herein, core-shell structured Pd₃M@Pt/C nanoparticles with binary PdM alloy cores (M = Fe, Ni, and Co) and a monolayer Pt shell were successfully synthesized with diverse interfaces. Among these, Pd₃Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance, roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference. The significantly enhanced activity is attributed to the combined effects of strain engineering, interfacial electron transfer, and improved Pt utilization. Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition (Pd₃Fe) optimizes the surface oxygen adsorption energy, thereby rendering excellent electrocatalytic activity. Future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.

Platinum Single Atoms Supported on Nanoarray-Structured Nitrogen-Doped Graphite Foil with Enhanced Catalytic Performance for Hydrogen Evolution Reaction

Platinum-based single-atom catalysts (SACs) are among the most promising candidates for the practical applications of electrochemical hydrogen evolution reaction (HER), but their catalytic efficiency remains to be further enhanced. Herein, a well-designed nanoarray-structured nitrogen-doped graphite foil (NNGF) substrate is introduced to support Pt SACs in Pt-N₄ construction (Pt₁/NNGF) for HER. Within NNGF, the constructed nanoarray-structured surficial layer for supporting Pt SACs could enhance the exposure of active sites to the electrolyte and improve the reaction and diffusion kinetics; meanwhile, the retained graphite structures in bulk NNGF provide not only the required electrical conductivity but also the mechanical stability and flexibility. Because of such double-layer structures of NNGF, stable Pt-N₄ construction, and binder-free advantages, the Pt₁/NNGF electrode exhibits a low overpotential of 0.023 V at 10 mA cm^-2 and a small Tafel slope of 29.1 mV dec^-1 as well as an excellent long-term durability.

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

Natural gas (Methane) is currently the primary source of catalytic hydrogen production, accounting for three quarters of the annual global dedicated hydrogen production (about 70 M tons). Steam–methane reforming (SMR) is the currently used industrial process for hydrogen production. However, the SMR process suffers with insufficient catalytic activity, low long-term stability, and excessive energy input, mostly due to the handling of large amount of CO2 coproduced. With the demand for anticipated hydrogen production to reach 122.5 M tons in 2024, novel and upgraded catalytic processes are desired for more effective utilization of precious natural resources. In this review, we summarized the major descriptors of catalyst and reaction engineering of the SMR process and compared the SMR process with its derivative technologies, such as dry reforming with CO2 (DRM), partial oxidation with O2, autothermal reforming with H2O and O2. Finally, we discussed the new progresses of methane conversion: direct decomposition to hydrogen and solid carbon and selective oxidation in mild conditions to hydrogen containing liquid organics (i.e., methanol, formic acid, and acetic acid), which serve as alternative hydrogen carriers. We hope this review will help to achieve a whole picture of catalytic hydrogen production from methane.

Gradient-Concentration Design of Stable Core-Shell Nanostructure for Acidic Oxygen Reduction Electrocatalysis

Manipulating the surface structure of electrocatalysts at the atomic level is of primary importance to simultaneously achieve the activity and stability dual-criteria in oxygen reduction reaction (ORR) for proton exchange membrane fuel cells. Here, a durable acidic ORR electrocatalyst with the "defective-armored" structure of Pt shell and Pt-Ni core nanoparticle decorated on graphene (Pt-Ni@Pt_D /G) using a facile and controllable galvanic replacement reaction to generate gradient distribution of Pt-Ni composition from surface to interior, followed by a partial dealloying approach, leaching the minor nickel atoms on the surface to generate defective Pt skeleton shell, is reported. The Pt-Ni@Pt_D /G catalyst shows impressive performance for ORR in acidic (0.1 m HClO₄ ) electrolyte, with a high mass activity of threefold higher than that of Pt/C catalyst owing to the tuned electronic structure of locally concave Pt surface sites through synergetic contributions of Pt-Ni core and defective Pt shell. More importantly, the electrochemically active surface areas still retain 96% after 20 000 potential cycles, attributing to the Pt atomic shell acting as the protective "armor" to prevent interior Ni atoms from further dissolution during the long-term operation.

Heterophase fcc-2H-fcc gold nanorods

The crystal phase-based heterostructures of noble metal nanomaterials are of great research interest for various applications, such as plasmonics and catalysis. However, the synthesis of unusual crystal phases of noble metals still remains a great challenge, making the construction of heterophase noble metal nanostructures difficult. Here, we report a one-pot wet-chemical synthesis of well-defined heterophase fcc-2H-fcc gold nanorods (fcc: face-centred cubic; 2H: hexagonal close-packed with stacking sequence of "AB") at mild conditions. Single particle-level experiments and theoretical investigations reveal that the heterophase gold nanorods demonstrate a distinct optical property compared to that of the conventional fcc gold nanorods. Moreover, the heterophase gold nanorods possess superior electrocatalytic activity for the carbon dioxide reduction reaction over their fcc counterparts under ambient conditions. First-principles calculations suggest that the boosted catalytic performance stems from the energetically favourable adsorption of reaction intermediates, endowed by the unique heterophase characteristic of gold nanorods.

Imaging the kinetics of anisotropic dissolution of bimetallic core-shell nanocubes using graphene liquid cells

Chemical design of multicomponent nanocrystals requires atomic-level understanding of reaction kinetics. Here, we apply single-particle imaging coupled with atomistic simulation to study reaction pathways and rates of Pd@Au and Cu@Au core-shell nanocubes undergoing oxidative dissolution. Quantitative analysis of etching kinetics using in situ transmission electron microscopy (TEM) imaging reveals that the dissolution mechanism changes from predominantly edge-selective to layer-by-layer removal of Au atoms as the reaction progresses. Dissolution of the Au shell slows down when both metals are exposed, which we attribute to galvanic corrosion protection. Morphological transformations are determined by intrinsic anisotropy due to coordination-number-dependent atom removal rates and extrinsic anisotropy induced by the graphene window. Our work demonstrates that bimetallic core-shell nanocrystals are excellent probes for the local physicochemical conditions inside TEM liquid cells. Furthermore, single-particle TEM imaging and atomistic simulation of reaction trajectories can inform future design strategies for compositionally and architecturally sophisticated nanocrystals.

Rational design of multicomponent nanocrystals requires atomic-level understanding of reaction kinetics. Here, the authors apply single-particle liquid-cell electron microscopy imaging coupled with atomistic simulations to understand pathways and rates of bimetallic core-shell nanocubes undergoing oxidative dissolution.

Proton exchange membrane with plasmon-active surface for enhancement of fuel cell effectivity

The action of fuel cells with proton-exchanged membranes (PEMs) requires the implementation of the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) on the opposite sides of the PEMs. Recently, based on several models of electrochemical reactions a significant decrease in the thermodynamic activation barrier of both reactions under plasmon assistance was reported. In this work, we propose the design of a PEM fuel cell with a plasmon-active catalytic surface providing plasmonic triggering and enhancement of fuel cell efficiency. In particular, we deposited bimetallic (Au@Pt) nanostructures on the PEM surface and integrated them into the fuel cell design. Plasmon excitation occurs on the Au nanostructures under light illumination at the corresponding NIR wavelength, while the Pt shell is responsible for the introduction of catalytic sites. Light illumination results in a significant enhancement of the electric current produced by the fuel cell. In particular, the electric current increased several times. Control experiments indicated that the observed enhancement takes place only when the light wavelength is in compliance with the plasmon absorption band and the contribution from thermal effects is negligible. The present approach for the introduction of plasmon assistance into the design of advanced fuel cells makes them suitable for increasing the fuel cell efficiency under sunlight.

Feed gas exchange (startup/shutdown) effects on Pt/C cathode electrocatalysis and surface Pt-oxide behavior in polymer electrolyte fuel cells as revealed using in situ real-time XAFS and high-resolution STEM measurements

The synchronizing measurements of both cyclic voltammograms (CVs) and real-time quick XAFSs (QXAFSs) for Pt/C cathode electrocatalysts in a membrane electrode assembly (MEA) of polymer electrolyte fuel cells (PEFCs) treated by anode-gas exchange (AGEX) and cathode-gas exchange (CGEX) cycles (startup/shutdown conditions of FC vehicles) were performed for the first time to understand the opposite effects of the AGEX and CGEX treatments on the Pt/C performance and durability and also the contradiction between the electrochemical active surface area (ECSA) decrease and the performance increase by CGEX treatment. While the AGEX treatment decreased both the ECSA and performance of MEA Pt/C due to carbon corrosion, it was found that the CGEX treatment decreased the ECSA but increased the Pt/C performance significantly due to high-index (331) facet formation (high-resolution STEM) and hence the suppression of strongly bound Pt-oxide formation at cathode Pt nanoparticle surfaces. Transient QXAFS time-profile analysis for the MEA Pt/C also revealed a direct relationship between the electrochemical performance or durability and transient kinetics of the Pt/C cathode.

Nanocatalosomes as Plasmonic Bilayer Shells with Interlayer Catalytic Nanospaces for Solar-Light-Induced Reactions

Interest and challenges remain in designing and synthesizing catalysts with nature-like complexity at few-nm scale to harness unprecedented functionalities by using sustainable solar light. We introduce "nanocatalosomes"-a bio-inspired bilayer-vesicular design of nanoreactor with metallic bilayer shell-in-shell structure, having numerous controllable confined cavities within few-nm interlayer space, customizable with different noble metals. The intershell-confined plasmonically coupled hot-nanospaces within the few-nm cavities play a pivotal role in harnessing catalytic effects for various organic transformations, as demonstrated by "acceptorless dehydrogenation", "Suzuki-Miyaura cross-coupling" and "alkynyl annulation" affording clean conversions and turnover frequencies (TOFs) at least one order of magnitude higher than state-of-the-art Au-nanorod-based plasmonic catalysts. This work paves the way towards next-generation nanoreactors for chemical transformations with solar energy.

Engineering bunched Pt-Ni alloy nanocages for efficient oxygen reduction in practical fuel cells

Development of efficient and robust electrocatalysts is critical for practical fuel cells. We report one-dimensional bunched platinum-nickel (Pt-Ni) alloy nanocages with a Pt-skin structure for the oxygen reduction reaction that display high mass activity (3.52 amperes per milligram platinum) and specific activity (5.16 milliamperes per square centimeter platinum), or nearly 17 and 14 times higher as compared with a commercial platinum on carbon (Pt/C) catalyst. The catalyst exhibits high stability with negligible activity decay after 50,000 cycles. Both the experimental results and theoretical calculations reveal the existence of fewer strongly bonded platinum-oxygen (Pt-O) sites induced by the strain and ligand effects. Moreover, the fuel cell assembled by this catalyst delivers a current density of 1.5 amperes per square centimeter at 0.6 volts and can operate steadily for at least 180 hours.

Mesoporous Nanostructured Composite Derived from Thermal Treatment CoFe Prussian Blue Analogue Cages and Electrodeposited NiCo-S as an Efficient Electrocatalyst for an Oxygen Evolution Reaction

Developing effective and priceless electrocatalysts is an indispensable requirement for advancing the efficiency of water splitting to get clean and sustainable fuels. Herein, we reported a feasible strategy for preparing a trimetallic (NiCoFe) superior electrocatalyst with a novel open-cage/3D frame-like structure for an oxygen evolution reaction (OER). It is prepared by consequent thermal treatments of a CoFe Prussian blue analogue frame/cage-like structure under an argon (CoFeA-TT) atmosphere and then electrochemical deposition of nickel-cobalt sulfide nanosheets as a shell layer on it. The electrochemical measurements demonstrated that the deposition of NiCo-S on CoFeA-TT (NiCo-S@CoFeA-TT) has the best catalytic performance and can drive the benchmark current density of 10 mA cm^-2 at a low overpotential of 268 mV with a Tafel slope of 62 mV dec^-1 and an excellent long-term catalytic stability in an alkaline medium. Its outstanding electrocatalytic performances are endowed from frame/cage-like structures, highly exposed active sites, accelerated mass and electron transport, and the synergistic effect of multiple hybrid components. The NiCo-S@CoFeA-TT showed a better performance than most advanced nonprecious catalysts and the noble commercial RuO₂ catalyst. This study exhibited an effective and efficient procedure to design 3D porous architecture catalysts for the energy-relevant electrocatalysis reaction.

Mesoporous Pt@PtM (M = Co, Ni) cage-bell nanostructures toward methanol electro-oxidation

Rational design of Pt-based nanostructures with a controllable morphology and composition is vital for electrocatalysis. Herein, we demonstrate a dual-template strategy to fabricate well-defined cage-bell nanostructures including a Pt core and a mesoporous PtM (M = Co, Ni) bimetallic shell (Pt@mPtM (M = Co, Ni) CBs). Owing to their unique nanostructure and bimetallic properties, Pt@mPtM (M = Co, Ni) CBs show higher catalytic activity, better durability and stronger CO tolerance for the methanol oxidation reaction than commercial Pt/C. This work provides a general method for convenient preparation of cage-bell nanostructures with a mesoporous bimetallic shell, which have high promising potential for application in electrocatalytic fields.