Styrylbenzoquinoline dyads as a new type of fluorescing photochromes operating via [2 + 2] photocycloaddition mechanism: Optimization of the structure

We synthesized and studied a novel bichromophoric dyad in which bridging methylene groups link two styrylbenzo[f]quinoline (SBQ) photochromes to a salicylic acid residue. The dyad was designed for use as a fluorescent P-type photochrome acting via a [2 + 2] photocycloaddition (PCA) reaction. Compared to previously studied dyads, a change in the attachment handle and shortening of the bridging groups resulted in simultaneous rise of the quantum yields of both fluorescence and PCA. Under light irradiation, two competitive reversible reactions occurred in the dyad. The first is photoisomerization between the trans- and cis- isomers of the SBQ moieties. The second is PCA. The latter process was predominant and resulted in the formation of the cyclobutane ring bearing two benzo[f]quinoline (BQ) groups. In the ground S0 state, NMR data and DFT calculations indicated the formation of folded dyad conformers whose structure is pre-organized for PCA due to π-stacking interactions of two SBQ moieties. In the excited dyad, steady-state and time-resolved nanosecond fluorescence spectroscopy revealed the formation of an excimer, which was assumed to be a precursor of cyclobutane. Due to the fluorescence properties of SBQ and BQ, both dyad and cyclobutane fluoresce and can serve as a color-correlated multicolor fluorescence photoswitch. A simple approach is proposed for predicting the relationship between the spectral properties of the dyad and cyclobutane, which are the open and closed isomers of a new type of photochromes. The approach uses the dependence of the position of the maximum of the absorption band of an aromatic compound on the size of the π-system, as well as the fact that the sizes of the π-systems of the dyad and cyclobutane are related by a simple relation.

Super-exchange interaction enables Fe2-xMnxO3 perovskite with excellent catalytic oxidation activity toward hexabromocyclododecane under humidity

Although enhancing the catalytic oxidation activity is a hotspot in thermal-driven catalytic disposal of persistent organic pollutants, few studies have managed to improve catalysts' water-resistance properties. Herein, we developed Fe2-xMnxO3 perovskite to boost the catalytic oxidation of hexabromocyclododecane under humidity by modulating its super-exchange interaction (SEI, Fe3+ + Mn3+ → Fe2+ + Mn4+). Fe0.4Mn1.6O3, with the strongest SEI, exhibits the biggest oxidation rate-constant, which is 3 times higher than that of commonly used Fe2O3 without SEI. Notably, unlike Fe2O3 which deactivates at a relative humidity of 5 %. Fe0.4Mn1.6O3 maintains its activity and is even boosted by 22 % compared to dry conditions. Mechanistic insights reveal that SEI between Fe and Mn enhances the reactivity of Mn4+- linked Olatt by lowering the reductive temperature from Mn4+ to Mn3+. Meanwhile, SEI promotes the adsorption of the associatively adsorbed H2O (HOH-type water) by reducing adsorption energy, thereby facilitating the formation of hydroxyl species, which are crucial for the oxidation process under humidity.

Phosphate ligand-mediated production of reactive oxygen species during oxygenation of Fe(II)-phosphate complexes

Reactive oxygen species (ROS) production upon the oxygenation of reduced iron minerals is of critical importance to redox cycles of Fe and the fate of refractory organic contaminants. The environmental impact factors during this process, however, have been underappreciated. In this study, prominently enhanced production of hydroxyl radicals (•OH) was observed by oxygenation of Fe(II) with 5-50 mM phosphate. The results of spin trap electron spin resonance (ESR) experiment showed that Fe(II)-phosphate complexes facilitated the generation of •OH. The degradation experiment of p-nitrophenol (PNP) confirmed that •OH formation was dominated by a consecutive one-electron O2 reduction (90.2-96.9 %), and the quantification of PNP degradation products revealed that Fe(II)/phosphate molar ratios regulated the O2 activation pathways for O2•- or •OH production. The further experimental and theoretical investigation demonstrated that the coordination of phosphate with Fe(II) plays a dual role in ROS generation that facilitated O2•- formation by lowering the energy barrier for Fe(II) oxidation and altered the reaction pathway of •OH formation due to its occupation of sites for electron transfer. The present work highlights an important role of natural oxyanions in O2 activation by Fe(II) and raises the possibility of in situ degradation of contaminants in subsurface environment.

Covalent small-molecule inhibitors of SARS-CoV-2 Mpro: Insights into their design, classification, biological activity, and binding interactions

Since 2020, many compounds have been investigated for their potential use in the treatment of SARS-CoV-2 infection. Among these agents, a huge number of natural products and FDA-approved drugs have been evaluated as potential therapeutics for SARS-CoV-2 using virtual screening and docking studies. However, the identification of the molecular targets involved in viral replication led to the development of rationally designed anti-SARS-CoV-2 agents. Among these targets, the main protease (Mpro) is one of the key enzymes needed in the replication of the virus. The data gleaned from the crystal structures of SARS-CoV-2 Mpro complexes with small-molecule covalent inhibitors has been used in the design and discovery of many highly potent and broad-spectrum Mpro inhibitors. The current review focuses mainly on the covalent type of SARS-CoV-2 Mpro inhibitors. The design, chemistry, and classification of these inhibitors were also in focus. The biological activity of these inhibitors, including their inhibitory activities against Mpro, their antiviral activities, and the SAR studies, were discussed. The review also describes the potential mechanism of the interaction between these inhibitors and the catalytic Cys145 residue in Mpro. Moreover, the binding modes and key binding interactions of these covalent inhibitors were also illustrated. The covalent inhibitors discussed in this review were of diverse chemical nature and origin. Their antiviral activity was mediated mainly by the inhibition of SARS-CoV-2 Mpro, with IC50 values in the micromolar to the nanomolar range. Many of these inhibitors exhibited broad-spectrum inhibitory activity against the Mpro enzymes of other coronaviruses (SARS-CoV-1 and MERS-CoV). The dual inhibition of the Mpro and PLpro enzymes of SARS-CoV-2 could also provide higher therapeutic benefits than Mpro inhibition. Despite the approval of nirmatrelvir by the FDA, many mutations in the Mpro enzyme of SARS-CoV-2 have been reported. Although some of these mutations did not affect the potency of nirmatrelvir, there is an urgent need to develop a second generation of Mpro inhibitors. We hope that the data summarized in this review could help researchers in the design of a new potent generation of SARS-CoV-2 Mpro inhibitors.

Recent discovery of natural substances with cathepsin L-inhibitory activity for cancer metastasis suppression

Cathepsin L (CTSL), a cysteine cathepsin protease of the papain superfamily, plays a crucial role in cancer progression and metastasis. Dysregulation of CTSL is frequently observed in tumor malignancies, leading to the degradation of extracellular matrix and facilitating epithelial-mesenchymal transition (EMT), a key process in malignant cancer metastasis. This review mainly provides a comprehensive information about recent findings on natural inhibitors targeting CTSL and their anticancer effects, which have emerged as potent anticancer therapeutic agents or metastasis-suppressive adjuvants. Specifically, inhibitors are categorized into small-molecule and macromolecule inhibitors, with a particular emphasis on cathepsin propeptide-type macromolecules. Additionally, the article explores the molecular mechanisms of CTSL involvement in cancer metastasis, highlighting its regulation at transcriptional, translational, post-translational, and epigenetic levels. This work underscores the importance of understanding natural CTSL inhibitors and provides researchers with practical insights to advance the relevant fields and discover novel CTSL-targeting inhibitors from natural sources.

Enhancing the Lewis acidity of single atom Tb via introduction of boron to achieve efficient photothermal synergistic CO2 cycloaddition

Nowadays, it is becoming increasingly urgent to lower the escalating carbon dioxide (CO2) to reduce greenhouse effect. Fortunately, it is an ideal strategy by using the inexhaustible solar energy as the driving force to manipulate the cycloaddition reaction, the atomic efficiency of which is 100 %. This work represents the first attempt on utilization of rare-earth metal Tb with atomic dispersion, and the structure of Tb coordinated with 4 N-atoms and 2B-atoms was constructed on interconnected carbon hollow spheres. The introduction of electron-deficient B reduces the electron density of Tb, thereby boosting Lewis acidity and promoting the occurrence of ring-opening reaction. The mechanism exploration enunciates that TbN4B2/C is a photothermal synergistic catalyst, the combined action of photogenerated electrons and strong Lewis acidic site of Tb reduces the free energy of the rate-determining step, and then improving the yield of cyclic carbonate up to 739 mmol g-1h-1.

Homogeneous versus heterogeneous Mn(II) oxidation in peroxymonosulfate assisting chlorination: Synergistic role for enhanced Mn(II) oxidation in water treatment

Removal of Mn(II) is an essential step for addressing water discoloration in water treatment utilities worldwide. However, conventional chlorination suffers from poor oxidation of Mn(II) due to its low homogeneous oxidation kinetics. This study explored the oxidation capability of a new chemical dosing strategy employing peroxymonosulfate (PMS) to assist the chlorination process (PMS@Cl2) for effective Mn(II) oxidation. The study comprehensively explored both oxidation kinetics and underlying mechanisms associated with homogeneous and heterogeneous oxidation within the PMS@Cl2 system. At an [Mn(II)]0 of 1 mg/L, chlorination demonstrated inability in oxidizing Mn(II), with <10 % oxidation even at an elevated [Cl2] of 150 μM (∼10 mg/L). By contrast, PMS completely oxidized 100 % Mn(II) within a 30-minute reaction at a much lower [PMS] of 60 μM (kobs = 0.07 min-1 and t1/2 = 9 min), demonstrating its superior Mn(II) oxidation kinetics (over one order of magnitude faster than conventional chlorine). PMS@Cl2 exhibited an interesting synergistic benefit when combining a lower dose PMS with a higher routine dose Cl2 (loPMS@hiCl2), e.g. [PMS]:[Cl2] at 15:30 or 30:30 μM. Both conditions achieved 100 % Mn(II) oxidation, with even better values of kobs and t1/2 (0.16-0.17 min-1 and ∼4 min) relative to PMS alone at 60 µM. The synergic benefit of PMS@Cl2 was attributed to distinct functions played by PMS and Cl2 in both homogeneous and heterogeneous oxidation processes. Reactive species identification excluded the possible involvement of SO4•-, OH•, or chlorine radicals in the homogeneous oxidation of the PMS@Cl2 system. Instead, the dominant species was O2•- radical generated during the reaction of Mn(II) and PMS. Furthermore, the heterogeneous oxidation emphasized the important role of combining Cl2 dosing, which demonstrated an increased reactivity and electron transfer with the Mn-O-Mn complex, surpassing PMS. Overall, heterogeneous oxidation accelerated the oxidation kinetics of the PMS@Cl2 system by 1.1-2 orders of magnitude relative to the homogeneous oxidation of Cl2 alone. We here demonstrated that PMS@Cl2 could offer a more efficient mean of soluble Mn(II) mitigation, achieved with a relatively low routine dose of oxidant in a short reaction period. The outcomes of this study would address the existing limitations of traditional chlorine oxidation, minimizing the trade-offs associated with high residual chlorine levels after treatments for soluble manganese-containing water.

Kinetic and structural analysis of redox-reversible artificial imine reductases

Three artificial imine reductases, constructed via supramolecular anchoring utilising FeIII-azotochelin, a natural siderophore, to bind an iridium-containing catalyst to periplasmic siderophore-binding protein (PBP) scaffolds, have previously been synthesised and subjected to catalytic testing. Despite exhibiting high homology and possessing conserved siderophore anchor coordinating residues, the three artificial metalloenzymes (ArMs) displayed significant variability in turnover frequencies (TOFs). To further understand the catalytic properties of these ArMs, their kinetic behaviour was evaluated with respect to the reduction of three cyclic imines: dihydroisoquinoline, harmaline, and papaverine. Kinetic analyses revealed that all examined ArMs adhere to Michaelis-Menten kinetics, with the most pronounced saturation profile observed for the substrate harmaline. Additionally, molecular docking studies suggested varied hydrogen-bonding interactions between substrates and residues within the artificial binding pocket. Pi-stacking and pi-cation interactions were identified for harmaline and papaverine, corroborating the higher affinity of these substrates for the ArMs in comparison to dihydroisoquinoline. Furthermore, it was demonstrated that multiple cavities are capable of accommodating substrates in close proximity to the catalytic centre, thereby rationalising the moderate enantioselectivity conferred by the unmodified scaffolds.

A thiopyridine-bound mirror-image copper center in an artificial non-heme metalloenzyme

Artificial metalloenzymes, in which a metal complex and protein matrix are combined, have been synthesized to catalyze stereoselective reactions using the chiral environment provided by the protein cavity. Artificial metalloenzymes can be engineered by the chemical modification and mutagenesis of the protein matrix. We developed artificial non-heme metalloenzymes using a cupin superfamily protein (TM1459) with a 4-His tetrad-metal-binding motif. The Cu-bound H52A/C106D mutant with 3-His triad showed a S-enantioselective Michael addition of nitromethane to α,β-unsaturated ketone, 2-aza-chalcone 1. In this study, we demonstrated a chemical modification near the copper-binding site of this mutant to reverse its enantioselectivity. For chemical modification, the amino acid on the Si-face of the binding state of 1 to the copper center was replaced with Cys, followed by reaction with 4,4'-dithiopyridine (4-PDS) to form S-(pyridin-4-ylthio)cysteine (Cys-4py). Cu-bound I49C-4py/H52A/C106D showed reversal of the enantioselectivity from S-form to R-form (ee = 71%, (R)). The effect of steric hindrance of the amino acids at position 49 on enantioselectivity was investigated using I49X/H52A/C106D mutants (X = A, C, I, F, and W). Additionally, chemical modification with 2,2'-dithiopyridine (2-PDS) produced I49-2py/H52A/C106D, which showed lower R-enantioselectivity than I49-4py/H52A/C106D. Among the mutants, the 4py-modification on the Si-face was the most effective in reversing the enantioselectivity. By tuning the Re-face side, the H54A mutation introduced into the I49C-4py/H52A/C106D increased the R-enantioselectivity (ee = 88%, (R)). X-ray crystallography revealed a coordinated structure with ligation of thiopyridine in Cu-bound I49C-4py/H52A/H54A/C106D.

Regulating cobalt-nitrogen function centers via Cu incorporation enhances ciprofloxacin destruction through peroxymonosulfate activation

Metal-nitrogen (M-N) coupling has shown promise as a catalytic active component for various reactions. However, the regulation of heterogeneous catalytic materials with M-N coupling for peroxymonosulfate (PMS) activation to enhance the degradation efficiency and reusability of antibiotics remains a challenge. In this study, an efficient modulation of M-N coupling was achieved through the incorporation of Cu into Co4N to form a Cu-Co4N composite with sea urchin-like morphology assembled by numerous nano-needles using hydrothermal and nitriding processes. This modulation led to enhanced PMS activation for ciprofloxacin (CIP) degradation. The Cu-Co4N/PMS system demonstrated exceptional removal efficiency with a degradation rate of 95.85% within 30 min and can be reused for five time without obvious loss of its initial activity. Additionally, the catalyst displayed a high capacity for degrading various challenging organic pollutants, as well as remarkable stability, resistance to interferences, and adaptability to pH changes. The synergistic effect between Co and Cu facilitated multiple redox cycles, resulting in the generation of reactive oxidized species. The primary active species involved in the catalytic degradation process included 1O2, SO4•-, O2•-, •OH, and e-, with 1O2 and SO4•- playing the most significant roles. The degradation pathways and toxicity of the intermediates for CIP were unveiled. This study offers valuable insights into the regulation of M-N centers for degrading antibiotics through PMS activation.

Strong metal-support interaction (SMSI) in environmental catalysis: Mechanisms, application, regulation strategies, and breakthroughs

The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

Built-in electric field in NiO-CuO heterostructures to regulate the hydroxide adsorption sites for 5-hydroxymethylfurfural electrooxidation assisted hydrogen production

The development of catalysts with suitable adsorption behavior for the reaction molecules and the elucidation of their internal structure-adsorption-catalytic activity relationships are crucial for the electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, NiO-CuO heterostructures with a spontaneous built-in electric field (BEF) are specifically designed and used to regulate the OH- adsorption site for freeing up the active site of HMF for the HMF oxidation reaction (HMFOR). The mechanism driving electron pumping/accumulation of the BEF is examined by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Electrochemical data and theoretical calculations show that BEF modulates the adsorption energy and adsorption site of substrate molecules, thereby enhancing the performance of HMFOR and hydrogen evolution reaction (HER). Notably, the NiO-CuO electrode demonstrates high 2,5-Furandicarboxylic acid (FDCA) selectivity (99.76 %) and generation rate (13.79 mmol gcat-1 h-1). It only requires 1.33 V to obtain a current density of 10 mA cm-2 for HMFOR-coupled H2 evolution. This research introduces a novel approach by regulating the adsorption of reactive molecules for HMFOR-assisted H2 evolution.

Selective exposure of (111) crystal plane in Pd49Ag30Te4 by Tb doping to weaken Pd - C bond and promote electroreduction of CO2 to CO

Employing electric energy to convert carbon dioxide (CO2) into valuable small molecules is a potentially practical method in energy storage and greenhouse gas alleviation. A huge challenge for electrocatalytic CO2 reduction is to reduce overpotential to improve energy efficiency. Herein, we demonstrate that doping alloy Pd49Ag30Te4 (PAT) with rare-earth element Tb is beneficial for selective exposure of (111) crystal plane, which is a highly active crystal plane for producing carbon monoxide (CO). The as-prepared Tb2.9PAT exhibited high electrocatalytic performance with 95.7 % CO faradic efficiency at - 0.8 V (vs RHE), far exceeding that of PAT, and coupled with good durability. In situ spectral study and theoretical calculations disclose that the introduction of Tb regulates the d-band center of PAT alloy, weakens the Pd - C bonding ability, and promotes the desorption of *CO in the rate-determining step. This study provides a method for doping induced selective exposure of crystal face, which provides new idea for improving catalytic performance.

Synergistic enhancement of oxygen vacancy enrichment and morphology regulation in CeO2-NiCo2O4 heterostructure catalysts for high-performance cathodes in direct borohydride-hydrogen peroxide fuel cells

Hydrogen peroxide (H2O2) emerges as a viable oxidant for fuel cells, necessitating the development of an efficient and cost-effective electrocatalyst for the hydrogen peroxide reduction reaction (HPRR). In this study, we synthesized a self-supporting, highly active HPRR electrocatalyst comprising two morphologically distinct components: CeO2-NiCo2O4 nanowires and CeO2-NiCo2O4 metal organic framework derivatives, via a two-step hydrothermal process followed by air calcination. X-ray diffraction and transmission electron microscopy analysis confirmed the presence of CeO2 and NiCo2O4, revealing the amalgamated interface between them. CeO2 exhibits multifunctionality in regulating the surface electronic configuration of NiCo2O4, fostering synergistic connections, and introducing oxygen deficiencies to enhance the catalytic efficacy in HPRR. Electrochemical measurements demonstrate a reduction current density of 789.9 mA·cm-2 at -0.8 V vs. Ag/AgCl. The assembly of direct borohydride-hydrogen peroxide fuel cell (DBHPFC) exhibits a peak power density of 45.2 mW·cm-2, demonstrating durable stability over a continuous operation period of 120 h. This investigation providing evidence that the fabrication of heterostructured catalysts based on CeO2 for HPRR is a viable approach for the development of high-efficiency electrocatalysts in fuel cell technology.

Molybdenum iron carbide-copper hybrid as efficient electrooxidation catalyst for oxygen evolution reaction and synthesis of cinnamaldehyde/benzalacetone

Oxygen evolution reaction (OER) is the efficiency limiting half-reaction in water electrolysis for green hydrogen production due to the 4-electron multistep process with sluggish kinetics. The electrooxidation of thermodynamically more favorable organics accompanied by CC coupling is a promising way to synthesize value-added chemicals instead of OER. Efficient catalyst is of paramount importance to fulfill such a goal. Herein, a molybdenum iron carbide-copper hybrid (Mo2C-FeCu) was designed as anodic catalyst, which demonstrated decent OER catalytic capability with low overpotential of 238 mV at response current density of 10 mA cm-2 and fine stability. More importantly, the Mo2C-FeCu enabled electrooxidation assisted aldol condensation of phenylcarbinol with α-H containing alcohol/ketone in weak alkali electrolyte to selective synthesize cinnamaldehyde/benzalacetone at reduced potential. The hydroxyl and superoxide intermediate radicals generated at high potential are deemed to be responsible for the electrooxidation of phenylcarbinol and aldol condensation reactions to afford cinnamaldehyde/benzalacetone. The current work showcases an electrochemical-chemical combined CC coupling reaction to prepare organic chemicals, we believe more widespread organics can be synthesized by tailored electrochemical reactions.

One-step electrodeposition synthesis of NiFePS on carbon cloth as self-supported electrodes for electrochemical overall water splitting

Electrocatalytic water splitting (EWS) for hydrogen production is considered an ideal strategy for utilizing renewable energy, reducing fossil fuel consumption, and addressing environmental pollution issues. Traditional noble metal electrocatalysts have excellent performance, but their cost is high. Developing efficient, stable, and relatively inexpensive dual functional electrocatalysts is crucial for promoting large-scale EWS hydrogen production processes. Herein, a simple one-step electrodeposition method was used to grow nickel-iron phosphorus-sulfides (NiFePS) on the surface of hydrophilic treated carbon cloth (CC). The resultant NiFePS/CC with a phosphorus to sulfur ratio of 1:4 exhibited the best electrocatalytic performance, requiring only -91 mV and 216 mV overpotentials to generate the current densities of 10 mA·cm-2 in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. When it was used as a bifunctional electrocatalyst to overall water splitting (OWS), a voltage of 1.536 V can generate a current density of 10 mA·cm-2. The excellent electrocatalytic performance can be ascribed to two factors: 1) the CC with excellent conductivity serves as a growth substrate, reducing the impedance of charge transfer from the electrode to the electrolyte and accelerating the electron transfer rate; 2) The large number of ultra-thin nanosheets formed on the surface of the catalyst increase the electrochemical specific surface area, expose more reaction sites, and thus improve the electrocatalytic reaction performance. This work provides a new approach for designing efficient non-noble metal electrocatalysts for water splitting.

Engineering high production of fatty alcohols from methanol by constructing coordinated dual biosynthetic pathways

Microbial cell factories provide an efficient approach for the green manufacturing of chemicals. However, the excessive use of sugars increases the potential risk of food crisis. Methanol, an abundant feedstock, holds promise in facilitating low-carbon production processes. However, the current methanol bioconversion is hindered by limited regulatory strategies and relatively low conversion efficiency. Here, a yeast biocatalyst was extensively engineered for efficient biosynthesis of fatty alcohols through reinforcement of precursor supply and methanol assimilation in Pichia pastoris. Furthermore, the dual cytoplasmic and peroxisomal biosynthetic pathways were constructed by mating and exhibited robust production of 5.6 g/L fatty alcohols by using methanol as the sole carbon source. This study provides a heterozygous diploid P. pastoris strain with dual cytoplasmic and peroxisomal biosynthetic pathways, which achieved the highest fatty alcohol production from one-carbon feedstocks to date.

Recent advances in fluorescent probes for ATP imaging

Adenosine-5'-triphosphate (ATP) is a critical biological molecule that functions as the primary energy currency within cells. ATP synthesis occurs in the mitochondria, and variations in its concentration can significantly influence mitochondrial and cellular performance. Prior studies have established a link between ATP levels and a variety of diseases, such as cancer, neurodegenerative conditions, ischemia, and hypoglycemia. Consequently, researchers have developed many fluorescent probes for ATP detection, recognizing the importance of monitoring intracellular ATP levels to understand cellular processes. These probes have been effectively utilized for visualizing ATP in living cells and biological samples. In this comprehensive review, we categorize fluorescent sensors developed in the last five years for ATP detection. We base our classification on fluorophores, structure, multi-response channels, and application. We also evaluate the challenges and potential for advancing new generations of fluorescence imaging probes for monitoring ATP in living cells. We hope this summary motivates researchers to design innovative and effective probes tailored to ATP sensing. We foresee imminent progress in the development of highly sophisticated ATP probes.

Catalytic depolymerization of Camellia oleifera shell lignin to phenolic monomers: Insights into the effects of solvent, catalyst and atmosphere

Camellia oleifera shell (COS) is a renewable biomass resource abundant in lignin with significant potential for producing phenolic monomers. However, the dearth of research has led to considerable resource wastage and environmental pollution. Herein, reductive catalytic fractionation (RCF) of COS was performed using noble metal catalysts in different solvents. An 11.1 wt% yield of phenolic monomers was achieved with 91% selectivity toward propylene-substituted monomers in H2O/EtOH (3:7, v/v) cosolvent under N2 atmosphere. Notably, the highest phenolic monomer yield of 17.0 wt% was obtained with impressive selectivity (86.9%) toward propanol-substituted monomers in the presence of H2. The GPC analysis and 2D HSQC NMR spectra indicated the effective depolymerization of lignin oligomers with catalysts. Phenolic monomers with ethyl, propyl, or propanol side chain could be produced from lignin-derived oligomers through hydrogenolysis, hydrogenation, and decarboxylation reactions. Overall, this study has paved the way for the valorization of COS lignin through the RCF strategy.

Competency in invasion science: addressing stagnation challenges by promoting innovation and creative thinking

In today's ever-evolving scientific landscape, invasion science faces a plethora of challenges, such as terminological inconsistency and the rapidly growing literature corpus with few or incomplete syntheses of knowledge, which may be perceived as a stagnation in scientific progress. We explore the concept of 'competency', which is extensively debated across disciplines such as psychology, philosophy, and linguistics. Traditionally, it is associated with attributes that enable superior performance and continuous ingenuity. We propose that the concept of competency can be applied to invasion science as the ability to creatively and critically engage with global challenges. For example, competency may help develop innovative strategies for understanding and managing the multifaceted, unprecedented challenges posed by the spread and impacts of non-native species, as well as identifying novel avenues of inquiry for management. Despite notable advancements and the exponential increase in scholarly publications, invasion science still encounters obstacles such as insufficient interdisciplinary collaboration paralleled by a lack of groundbreaking or actionable scientific advancements. To enhance competency in invasion science, a paradigm shift is needed. This shift entails fostering interdisciplinary collaboration, nurturing creative and critical thinking, and establishing a stable and supportive environment for early career researchers, thereby promoting the emergence of competency and innovation. Embracing perspectives from practitioners and decision makers, alongside diverse disciplines beyond traditional ecological frameworks, can further add novel insights and innovative methodologies into invasion science. Invasion science must also address the ethical implications of its practices and engage the public in awareness and education programs. Such initiatives can encourage a more holistic understanding of invasions, attracting and cultivating competent minds capable of thinking beyond conventional paradigms and contributing to the advancement of the field in a rapidly changing world.

Design of Mn-based nanozymes with multiple enzyme-like activities for identification/quantification of glyphosate and green transformation of organophosphorus

A Mn-based nanozyme, Mn-uNF/Si, with excellent alkali phosphatase-like activity was designed by in-situ growth of ultrathin Mn-MOF on the surface of silicon spheres, and implemented as an effective solid Lewis-Brønsted acid catalyst for broad-spectrum dephosphorylation. H218O-mediated GC-MS studies confirmed the cleavage sites and the involvement of H2O in the new bonds. DRIFT NH3-IR and in-situ ATR-FTIR confirmed the coexistence of Lewis-Brønsted acid sites and the adjustment of adsorption configurations at the interfacial sites. In addition, a green transformation route of "turning waste into treasure" was proposed for the first time ("OPs→PO43-→P food additive") using edible C. reinhardtii as a transfer station. By alkali etching of Mn-uNF/Si, a nanozyme Mn-uNF with laccase-like activity was obtained. Intriguingly, glyphosate exhibits a laccase-like fingerprint-like response (+,-) of Mn-uNF, and a non-enzyme amplified sensor was thus designed, which shows a good linear relationship with Glyp in a wide range of 0.49-750 μM, with a low LOD of 0.61 μM, as well as high selectivity and anti-interference ability under the co-application of phosphate fertilizers and multiple pesticides. This work provides a controllable methodology for the design of bifunctional nanozymes, which sheds light on the highly efficient green transformation of OPs, and paves the way for the selective recognition and quantification of glyphosate. Mechanistically, we also provided deeper insights into the structure-activity relationship at the atomic scale.

A supported Ni2 dual-atoms site hollow urchin-like carbon catalyst for synergistic CO2 electroreduction

Dual-atoms catalysts (DACs), while inheriting the advantages of maximum atom utilization ratio and excellent selectivity of single-atom catalysts (SACs), can better enhance the catalytic activity through the synergy of adjacent atoms. Therefore, DACs are considered to be very potential catalysts for CO2 to CO conversion. Its catalytic activity is greatly influenced by the coordination environment and morphology. Here, hollow urchin-like NiNC catalysts (Ni-NC(HU)-x, x = 100, 50, 25, 0) were synthesized using urchin-like nickel particles as template. By adjusting the amount of additional nitrogen source, the percentage content of pyridinic-N was adjusted as well as further affecting the coordination environment. Among them, Ni-NC(HU)-50, which had the highest content of pyridinic-N, formed a dual-atoms coordination structure and had the best catalytic performance that the CO Faradaic efficiency (FECO) reached 97.2 % at -0.9 V vs. reversible hydrogen electrode (RHE) and sustained above 95 % within 50 h. In-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and density functional theory (DFT) calculations showed that Ni-NC(HU)-50 exhibited the best performance of CO2 reduction reaction (CO2RR) by lowering the *COOH formation free energy barrier and its favorable dual desorption mechanism of *COL and *COB.

Oxygen doping regulation of Co single atom catalysts for electro-Fenton degradation of tetracycline

Electro-Fenton is an effective process for degrading hard-to-degrade organic pollutants, such as tetracycline (TC). However, the degradation efficiency of this process is limited by the activity and stability of the cathode catalyst. Herein, a temperature gradient pyrolysis strategy and oxidation treatment is proposed to modulate the coordination environment to prepare oxygen-doped cobalt monoatomic electrocatalysts (CoNOC). The CoNOC catalysts can achieve the selectivity of 93 % for H2O2 with an electron transfer number close to 2. In the H-cell, the prepared electrocatalysts can achieve more than 100 h of H2O2 production with good stability and the yield of 1.41 mol gcatalyst-1 h-1 with an average Faraday efficiency (FE) of more than 88 %. The calculations indicate that the epoxy groups play a crucial role in modulating the oxygen reduction pathway. The O doping and unique N coordination of Co single-atom active sites (CoN(Pd)3N(Po)1O1) can effectively weaken the O2/OOH* interaction, thereby promoting the production of H2O2. Finally, the electro-Fenton system could achieve a TC degradation rate of 94.9 % for 120 min with a mineralization efficiency of 87.8 % for 180 min, which provides a reliable option for antibiotic treatment. The significant involvement of OH in the electro-Fenton process was confirmed, and the plausible mineralization pathway for TC was proposed.

CdS-based Schottky junctions for efficient visible light photocatalytic hydrogen evolution

Heterojunctions photocatalysts play a crucial role in achieving high solar-hydrogen conversion efficiency. In this work, we mainly focus on the charge transfer dynamics and pathways for sulfides-based Schottky junctions in the photocatalytic water splitting process to clarify the mechanism of heterostructures photocatalysis. Sulfides-based Schottky junctions (CdS/CoP and CdS/1T-MoS2) were successfully constructed for photocatalytic water splitting. Because of the higher work function of CdS than that of CoP and 1T-MoS2, the direction of the built-in electric field is from CoP or 1T-MoS2 to semiconductor. Therefore, CoP and 1T-MoS2 can act as electrons acceptors to accelerate the transfer of photo-generated electron on the surface of CdS, thus improving the charge utilization efficiency. Meanwhile, CoP and 1T-MoS2 as active sites can also promote the water dissociation and lower the H+ reduction overpotential, thus contributing to the excellent photocatalytic hydrogen production activity (23.59 mmol·h-1·g-1 and 1195.8 mol·h-1·g-1 for CdS/CoP and CdS/1T-MoS2).

Exploiting CO2 laser to boost graphite inks electron transfer for fructose biosensing in biological fluids

The possibility to print electronics by means of office tools has remarkedly increased the possibility to design affordable and robust point-of-care/need devices. However, conductive inks suffer from low electrochemical and rheological performances limiting their applicability in biosensors. Herein, a fast CO2 laser approach to activate printed carbon inks towards direct enzymatic bioelectrocatalysis (3rd generation) is proposed and exploited to build biosensors for D-fructose analysis in biological fluids. The CO2 laser treatment was compared with two lab-grade printed transducers fabricated with solvent (SB) and water (WB) based carbon inks. The use of the laser revealed significant morpho-chemical variations on the printed inks and was investigated towards enzymatic direct catalysis, using Fructose dehydrogenase (FDH) integrated into entirely lab-produced biosensors. The laser-driven activation of the inks unveils the inks' direct electron transfer (DET) ability between FDH and the electrode surface. Sub-micromolar limits of detection (SB-ink LOD = 0.47 μM; WB-ink LOD = 0.24 μM) and good linear ranges (SB-ink: 5-100 μM; WB-ink: 1-50 μM) were obtained, together with high selectivity due to use of the enzyme and the low applied overpotential (0.15 V vs. pseudo-Ag/AgCl). The laser-activated biosensors were successfully used for D-fructose determination in complex synthetic and real biological fluids (recoveries: 93-112%; RSD ≤8.0%, n = 3); in addition, the biosensor ability for continuous measurement (1.5h) was also demonstrated simulating physiological D-fructose fluctuations in cerebrospinal fluid.

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Synergistic dual built-in electric fields in 1T-MoS2/Ni3S2/LDH for efficient electrocatalytic overall water splitting reactions

Designing cost-effective electrocatalysts for water decomposition is crucial for achieving environmental-friendly hydrogen production. A transition metal sulfide/hydroxide electrocatalyst (1T-MoS2/Ni3S2/LDH) with double heterogeneous interfaces was developed through a two-step hydrothermal assisted electrodeposition method. The presence of the two built-in electric fields not only accelerated the charge transfer at the interface, but also enhanced the adsorption of the reactants and intermediate groups, and therefore improved the reaction rate and overall catalytic performance. The results suggest that the 1T-MoS2/Ni3S2/LDH catalysts display exceptional electrocatalytic reactivity. Under alkaline conditions, the overpotential of the electrocatalyst was 187 (η50) mV for OER and 104 (η10) mV for HER. Furthermore, the two-electrode system assembled by the electrocatalyst needs only a voltage of 1.55 V to deliver a current density of 10 mA cm-2. Our result provides a simple and effective methodical approach to the design of dual heterogeneous interfacial electrocatalysts.

Construction of hollow sphere MnOX with abundant oxygen vacancy for accelerating VOCs degradation: Investigation through operando spectroscopycombined with on-line mass spectrometry

To clarify the key role of oxygen vacancy defects on enhancing the oxidative activity of the catalysts, metal-organic frameworks (MOFs) derived MnOX catalysts with different morphologies and oxygen vacancy defects were successfully prepared using a facile in-situ self-assembly strategy with different alkali moderators. The obtained morphologies included three-dimensional (3D) triangular cone stacked MnOX hollow sphere (MnOX-H) and 3D nanoparticle stacked MnOX nanosphere (MnOX-N). Compared to MnOX-N, MnOX-H exhibited higher activity for the oxidation of toluene (T90 = 226 °C). This was mainly due to the large number of oxygen vacancy defects and Mn4+ species in the MnOX-H catalyst. In addition, the hollow structure of MnOX-H not only facilitated toluene adsorption and activation of toluene and also provided more active sites for toluene oxidation. Reaction mechanism studies showed that the conversion of toluene to benzoate could be realized over MnOX-H catalyst during toluene adsorption at room temperature. In addition, abundant oxygen vacancy defects can accelerate the activated oxidation of toluene and the formation of oxidation products during toluene oxidation.

Construction of 2D/2D ZnIn2S4/Nb2CTx (MXene) hybrid with hole transport highway and active facet exposure boost photocatalytic hydrogen evolution

In this study, leveraging the tunable surface groups of MXene, the two-dimensional (2D) Nb2CTx with OH terminal (NC) was synthesized. 2D ZnIn2S4 (ZIS) nanosheets were prepared with the aid of sodium citrate, enhancing the exposure ratio of active (110) facet. On this basis, 2D/2D ZnIn2S4/Nb2CTx heterojunctions were fabricated to improve photocatalytic hydrogen evolution reaction (HER) performance. The optimized 6 wt%Nb2CTx/ZnIn2S4-450 (6NC/ZIS-450) photocatalyt exhibits a remarkable HER rate of 3603 μmol g-1h-1, which is 10 times superior to that of the original ZnIn2S4. Its apparent quantum efficiency (AQE) at 380 nm reaches 14.9 %. Meanwhile, even after 5 rounds of HER, the activity of 2D/2D ZnIn2S4/Nb2CTx heterojunction remained at 90 %, far superior to that of pure ZnIn2S4 (34 % and 31 %). Energy band structure analysis and density functional theory (DFT) calculation indicate that Nb2CTx adsorbed with OH exhibit a low work function. By serving as a hole cocatalyst, it effectively boosts the photocatalytic HER rate of ZnIn2S4/Nb2CTx heterojunction and inhibits the photocorrosion of ZnIn2S4. This unique insight, via hole transport highways and increased exposure of active facets, effectively enhances the activity and stability of sulfides photocatalysts.

Molybdenum diselenide/polymeric carbon nitride dual-homojunction photocatalyst with multi-step charge transfer for efficient catalytic carbon dioxide reduction

Due to the high dissociation energy of carbon dioxide (CO2) and sluggish charge transfer dynamics, photocatalytic CO2 reduction with high performance remains a huge challenge. Herein, we report a novel dual-homojunction photocatalyst comprising of cyano/cyanamide groups co-modified carbon nitride (CN-TH) intramolecular homojunction and 1 T/2H-MoSe2 homojunction (denoted as 1 T/2H-MoSe2/CN-TH) for enhanced photocatalytic CO2 reduction. In this dual-homojunction photocatalyst, the intramolecular CN-TH homojunction could promote the intralayer charge separation and transfer owing to the strong electron-withdrawing capabilities of the two-type cyanamide, while the 1 T/2H-MoSe2 homojunction mainly contributes to a promote interlayer charge transport of CN-TH. This could consequently induce a tandem multi-step charge transfer and accelerate the charge transfer dynamics, resulting in enhanced CO2 reduction activities. Thanks to this tandem multi-step charge transfer, the optimized 1 T/2H-MoSe2/CN-TH dual-homojunction photocatalyst presented a high CO yield of 27.36 μmol·g-1·h-1, which is 3.58 and 2.87 times higher than those of 1 T/2H-MoSe2/CN and 2H-MoSe2/CN-TH single homojunctions, respectively. This work provides a novel strategy for efficient CO2 reduction via achieving a tandem multi-step charge transfer through designing dual-homojunction photocatalyst.

Ultrasmall Pd nanoparticles supported on a metal-organic framework DUT-67-PZDC for enhanced formic acid dehydrogenation

The highly dispersed ultrasmall palladium nanoparticles (Pd NPs) (1.7 nm) were successfully immobilized on a N-containing metal-organic framework (MOF, DUT-67-PZDC) using a co-reduction method, and it is used as an excellent catalyst for formic acid dehydrogenation (FAD). The optimized catalyst Pd/DUT-67-PZDC(10, 10 wt% Pd loading) shows 100% hydrogen (H2) selectivity and formic acid (FA) conversion at 60 °C, and the commendable initial turnover frequency (TOF) values of 2572 h-1 with the sodium formate (SF) as an additive and 1059 h-1 even without SF, which is better than most reported MOF supported Pd monometallic heterogeneous catalysts. The activation energy (Ea) of FAD is 43.2 KJ/mol, which is lower than most heterogeneous catalysts. In addition, the optimized catalyst Pd/DUT-67-PZDC(10) maintained good stability over five consecutive runs, demonstrating only minimal decline in catalytic activity. The outstanding catalytic performance could be ascribed to the synergistic corporations of the unique structure of DUT-67-PZDC carrier with hierarchical pore characteristic, the metal-support interaction (MSI) between the active Pd NPs and DUT-67-PZDC, the highly dispersed Pd NPs with ultrafine size serve as the catalytic active site, as well as the N sites on the support could act as the proton buffers. This work provides a new paradigm for the efficient H2 production of FAD by constructing highly active heterogeneous Pd-based catalysts using MOF supports.

Anthraquinones-based photocatalysis: A comprehensive review

In recent years, there has been significant interest in photocatalytic technologies utilizing semiconductors and photosensitizers responsive to solar light, owing to their potential for energy and environmental applications. Current efforts are focused on enhancing existing photocatalysts and developing new ones tailored for environmental uses. Anthraquinones (AQs) serve as redox-active electron transfer mediators and photochemically active organic photosensitizers, effectively addressing common issues such as low light utilization and carrier separation efficiency found in conventional semiconductors. AQs offer advantages such as abundant raw materials, controlled preparation, excellent electron transfer capabilities, and photosensitivity, with applications spanning the energy, medical, and environmental sectors. Despite their utility, comprehensive reviews on AQs-based photocatalytic systems in environmental contexts are lacking. In this review, we thoroughly describe the photochemical properties of AQs and their potential applications in photocatalysis, particularly in addressing key environmental challenges like clean energy production, antibacterial action, and pollutant degradation. However, AQs face limitations in practical photocatalytic applications due to their low electrical conductivity and solubility-related secondary contamination. To mitigate these issues, the design and synthesis of graphene-immobilized AQs are highlighted as a solution to enhance practical photocatalytic applications. Additionally, future research directions are proposed to deepen the understanding of AQs' theoretical mechanisms and to provide practical applications for wastewater treatment. This review aims to facilitate mechanistic studies and practical applications of AQs-based photocatalytic technologies and to improve understanding of these technologies.

Facile Low-Temperature synthesis of novel carbon nitrides for efficient conversion of carbon dioxide into Value-Added chemicals

The interest in using carbon nitrides (CN) for CO2 conversion has stimulated extensive research on CN synthesis. Herein, we report the synthesis of two novel CN materials using low-cost commercially available precursors at low temperatures in a short duration of time. Two CN materials, one derived from 5-amino tetrazole (named 4NZ-CN) and the other derived from 3, 5-diamino-1, 2, 4-triazole (named 3NZ-CN) precursors, are prepared by refluxing these precursors for 2 h at 100 °C. 4NZ-CN and 3NZ-CN catalysts show higher surface areas (55.80 and 52.00 m2 g-1) and more basic sites (10.05 and 5.65 mmol g-1) than the conventional graphitic carbon nitride (g-C3N4) derived from melamine, for which the corresponding values are 9.20 m2 g-1 and 0.62 mmol g-1, respectively. In addition, both CN exhibit a 3-fold higher catalytic activity for CO2 cycloaddition to epoxides than g-C3N4. The structure-activity relationship was ascertained using a combination of experimental and computational studies, and a catalytic mechanism was proposed. This work provides a facile strategy for the synthesis of novel CN materials at relatively low temperatures, and the developed catalysts show remarkable performance in the conversion of CO2 to value-added chemicals.

Repairable body-centered cubic Fe0 anchoring on porous hollow nitrogen-doped carbon spheres with adjusting electron distribution for efficient electrocatalytic ammonia synthesis

Electrocatalytic nitrogen reduction reaction (ENRR) is a promising and efficient method for ammonia production. However, ENRR is restricted by the adsorption and activation of N2. Herein, an efficient nitrogen reduction reaction (NRR) electrocatalyst loaded with zero valent iron (ZVI) particles onto porous nitrogen-doped carbon (NC) hollow spheres is reported. The optimal Fe@10N3C-950 exhibits excellent performance with high ammonia (NH3) yield (152.28 µg h-1 mgcat-1) and Faradaic efficiency (FE, 54.55 %) at - 0.3 V (versus reversible hydrogen electrode, vs. RHE). Bader charge shows that the adsorbed N2 acquires more electrons from Fe sites with body-centered cubic (BCC) structure to better activate N2. Moreover, i-t experiments are performed before electrocatalytic NH3 production to effectively eliminate the effect of oxidation on ZVI and thus, maintain high ENRR activity for Fe@10N3C-950. Theoretical calculations indicate that nitrogen doping not only reduces the Gibbs free energy of rate determining step (RDS), but the BCC-structured Fe can also decrease the energy barriers of N2 activation and RDS.

Enhanced luminol electrochemiluminescence biosensing system based on highly dispersed bimetallic nanozyme coreaction accelerator and 3D DNA walker signal amplifier

In this work, a platinum-nickel based nanozyme is prepared and used as a coreaction accelerator in the luminol-H2O2 electrochemiluminescence (ECL) system to construct an ECL biosensor for dimethyl phthalate (DMP) detection. The PtNi/NC nanozyme possesses dispersed metal active sites, and the synergistic effect of Pt and Ni endows it with excellent catalytic performance, which effectively converts H2O2 into more superoxide anions, and then significantly enhances the ECL intensity of the luminol system. The ECL mechanism is investigated by combining cyclic voltammetry and ECL with different types of free radical scavengers. Simultaneously, an "off-on" biosensor is constructed by integrating 3D DNA walker with enzyme-free recycling amplification for ultrasensitive detection of DMP. The biosensor based on PtNi/NC nanozyme mediated luminol-H2O2 system and 3D DNA walker exhibits a linear range of 1 × 10-16 to 1 × 10-6 M with a detection limit of 4.3 × 10-17 M (S/N = 3), and displays good stability and specificity. This study demonstrates the advantages of PtNi/NC nanozyme in enhancing the luminol-H2O2 ECL system, providing new strategy for designing efficient ECL emitter and offering a new method for detecting phthalate esters.

Repurposing myoglobin into a carbene transferase for a [2,3]-sigmatropic Sommelet-Hauser rearrangement

New-to-Nature biocatalysis has emerged as a promising tool in organic synthesis thanks to progress in protein engineering. Notably, hemeproteins have been evolved into robust catalysts for carbene and nitrene transfers and related sigmatropic rearrangements. In this work, we report the first example of a [2,3]-sigmatropic Sommelet-Hauser rearrangement initiated by a carbene transfer of the sperm whale myoglobin mutant L29S,H64V,V68F that was previously reported to catalyze the mechanistically similar [2,3]-sigmatropic Doyle-Kirmse rearrangement. This repurposed heme enzyme catalyzes the Sommelet-Hauser rearrangement between ethyl diazoacetate and benzyl thioethers bearing strong electron-withdrawing substituents with good yields and enantiomeric excess. Optimized catalytic conditions in the absence of any reductant led to an increased asymmetric induction with up to 59% enantiomeric excess. This myoglobin mutant is therefore one of the few catalysts for the asymmetric Sommelet-Hauser rearrangement. This work broadens the scope of abiological reactions catalyzed by iron-carbene transferases with a new example of asymmetric sigmatropic rearrangement.

Entrance channels to coproheme in coproporphyrin ferrochelatase probed by exogenous imidazole binding

Iron insertion into porphyrins is an essential step in heme biosynthesis. In the coproporphyrin-dependent pathway, specific to monoderm bacteria, this reaction is catalyzed by the monomeric enzyme coproporphyrin ferrochelatase. In addition to the mechanistic details of the metalation of the porphyrin, the identification of the substrate access channel for ferrous iron to the active site is important to fully understand this enzymatic system. In fact, whether the iron reaches the active site from the distal or the proximal porphyrin side is still under debate. In this study we have thoroughly addressed this question in Listeria monocytogenes coproporphyrin ferrochelatase by X-ray crystallography, steady-state and pre-steady-state imidazole ligand binding studies, together with a detailed spectroscopic characterization using resonance Raman and UV-vis absorption spectroscopies in solution. Analysis of the X-ray structures of coproporphyrin ferrochelatase-coproporphyrin III crystals soaked with ferrous iron shows that iron is present on both sides of the porphyrin. The kinetic and spectroscopic study of imidazole binding to coproporphyrin ferrochelatase‑iron coproporphyrin III clearly indicates the presence of two possible binding sites in this monomeric enzyme that influence each other, which is confirmed by the observed cooperativity at steady-state and a biphasic behavior in the pre-steady-state experiments. The current results are discussed in the context of the entire heme biosynthetic pathway and pave the way for future studies focusing on protein-protein interactions.

Laser-induced stripping defect for highly selective electrochemical quantification of dopamine: Anti-interference from other catecholamine neurotransmitters

Detecting dopamine (DA) is critical for early diagnosis of neurological and psychiatric disorders. However, the presence of other catecholamine neurotransmitters with structural similarities to DA causes significant interference in its detection. Herein, we introduce S stripping defects via laser-induced MoS2 to functionalize MoS2 electrodes and improve their selectivity for DA electrochemical detection. The sensing results show its excellent immunity to interference from other neurotransmitters, ensuring the preservation of the DA electrochemical signal even in the mixed neurotransmitters such as acetylcholine (ACh), γ-aminobutyric acid (GABA), epinephrine (EP), norepinephrine (NP), and serotonin (5-HT). DFT calculations further reveal that the negatively charged S-stripping defects enhance DA adsorption on the surface of the functionalized MoS2 electrode, contributing to its excellent performance. Moreover, this functionalized electrodes successfully monitor DA released from living PC12 cells in the presence of other interference, highlighting its potential applicability in intercellular signaling communication.

Liposome-embedded PtCu nanozymes for improved immunoassay of accurate myocardial infarction

Herein, we developed a platinum-copper nano-enzyme-linked immunosorbent assay (NLISA) based split diagnostic platform for the ultrasensitive detection of cardiac troponin I (cTnI). The PtCu nanozyme synthesized by one-pot synthesis exhibited ultra-high peroxidase-like activity (35.17 U mg-1), which was about 4.5 times higher than that of the unmodified Pt nanozyme (8.83 U mg-1). Due to the efficient peroxidase-like activity of the copper-platinum complexed nanozyme, transduction and sequential amplification of cTnI biological signals were achieved in combination with a liposome-embedded amplification strategy. The encapsulation efficiency was calculated by introducing a liposomal bilayer model, which showed that the introduction of a single liposomal molecule could amplify the signal up to 870-fold, thus promising a high sensitivity test. Notably, the dynamic response of cTnI was in the range of 0.1-5000 pg mL-1 with an ultra-low detection limit (0.048 pg mL-1). The developed NLISA analysis system provides a new way to discover efficient and sensitive alternatives to ELISA kits, which can meet the practical needs of community healthcare testing conditions and rapid testing in hospitals.

Single-atom Mn sites confined into hierarchically porous core-shell nanostructures for improved catalysis of oxygen reduction

Applications of zinc-air batteries are partially limited by the slow kinetics of oxygen reduction reaction (ORR); Thus, developing effective strategies to address the compatibility issue between performance and stability is crucial, yet it remains a significant challenge. Here, we propose an in situ gas etching-thermal assembly strategy with an in situ-grown graphene-like shell that will favor Mn anchoring. Gas etching allows for the simultaneous creation of mesopore-dominated carbon cores and ultrathin carbon layer shells adorned entirely with highly dispersed Mn-N4 single-atom sites. This approach effectively resolves the compatibility issue between activity and stability in a single step. The unique core-shell structure allows for the full exposure of active sites and effectively prevents the agglomerations and dissolution of Mn-N4 sites in cores. The corresponding half-wave potential for ORR is up to 0.875 V (vs. reversible hydrogen electrode (RHE)) in 0.1 M KOH. The gained catalyst (Mn-N@Gra-L)-assembled zinc-air battery has a high peak power density (242 mW cm-2) and a durability of ∼ 115 h. Furthermore, replacing the zinc anode achieved a stable cyclic discharge platform of ∼ 20 h at varying current densities. Forming more fully exposed and stable existing Mn-N4 sites is a governing factor for improving the electrocatalytic ORR activity, significantly cycling durability, and reversibility of zinc-air batteries.

Comparative study on CeO2 catalysts with different morphologies and exposed facets for catalytic ozonation: performance, key factor and mechanism insight

Morphology and facet effects of metal oxides in heterogeneous catalytic ozonation (HCO) are attracting increasing interests. In this paper, the different HCO performances for degradation and mineralization of phenol of seven ceria (CeO2) catalysts, including four with different morphologies (nanorod, nanocube, nanooctahedron and nanopolyhedron) and three with the same nanorod morphology but different exposed facets, are comparatively studied. CeO2 nanorods with (110) and (100) facets exposed show the best performance, much better than that of single ozonation, while CeO2 nanocubes and nanooctahedra show performances close to single ozonation. The underlying reason for their different HCO performances is revealed using various experimental and density functional theory (DFT) calculation results and the possible catalytic reaction mechanism is proposed. The oxygen vacancy (OV) is found to be pivotal for the HCO performance of the different CeO2 catalysts regardless of their morphology or exposed facet. A linear correlation is discerned between the rate of catalytic decomposition of dissolved ozone (O3) and the density of Frenkel-type OV. DFT calculations and in-situ spectroscopic studies ascertain that the existence of OV can boost O3 activation on both the hydroxyl (OH) and Ce sites of CeO2. Conversely, various facets without OV exhibit similar O3 adsorption energies. The OH group plays an important role in activating O3 to produce hydroxyl radical (∙OH) for improved mineralization. This work may offer valuable insights for designing Facet- and OV-regulated catalysts in HCO for the abatement of refractory organic pollutants.

Enhancing electrochemical water-splitting efficiency with superaerophobic nickel-coated catalysts on Chinese rice paper

The quest for efficient hydrogen production highlights the need for cost-effective and high-performance catalysts to enhance the electrochemical water-splitting process. A significant challenge in developing self-supporting catalysts lies in the high cost and complex modification of traditional substrates. In this study, we developed catalysts featuring superaerophobic microstructures engineered on microspherical nickel-coated Chinese rice paper (Ni-RP), chosen for its affordability and exceptional ductility. These catalysts, due to their microspherical morphology and textured surface, exhibited significant superaerophobic properties, substantially reducing bubble adhesion. The nickel oxy-hydroxide (NiOxHy) and phosphorus-doped nickel (PNi) catalysts on Ni-RP demonstrated effective roles in oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), achieving overpotentials of 250 mV at 20 mA cm-2 and 87 mV at -10 mA cm-2 in 1 M KOH, respectively. Moreover, a custom water-splitting cell using PNi/Ni-RP and NiOxHy/Ni-RP electrodes reached an impressive average voltage of 1.55 V at 10 mA cm-2, with stable performance over 100 h in 1 M KOH. Our findings present a cost-effective, sustainable, and easily modifiable substrate that utilizes superaerophobic structures to create efficient and durable catalysts for water splitting. This work serves as a compelling example of designing high-performance self-supporting catalysts for electrocatalytic applications.

Realizing the high loading amount of active Cu on Al2O3 to boost its CO catalytic oxidation

Catalytic oxidation of carbon monoxide (CO) by Cu/Al2O3 has garnered increasing interest in recent years due to its promising application prospects. Numerous investigations conducted on the Cu/Al2O3 system, but its catalytic performance for CO oxidation is still not as promising as that of precious metal catalysts. Increasing the loading amount of the active Cu on Al2O3 surface is a feasible method for improving its activity. However, with the increase of Cu loading, the agglomeration and enlargement of Cu particles is inevitable, which reduces the active Cu amount. Therefore, the utilization rate of Cu atoms is not high and the catalytic performance often can not further rise. Enhancing active Cu loading amount as high as possible is a prerequisite to further enlarge the activity of Cu/Al2O3 catalyst. Herein, self-synthesized Al2O3 nanofibers (Al2O3-nf) with high specific surface area and abundant penta-coordinated aluminum (AlV) are used as the support to maximize the Cu loading amount by chemical vapor deposition (CVD). And commercially available α-Al2O3 is used for comparative experiment. The high specific surface area could make Cu high dispersion on Al2O3, even at 20 wt% Cu loads, which is beneficial to high concentration load of active Cu. The catalytic activity of Cu/Al2O3-nf-CVD gradually increases with the increase of Cu loading from 2 wt% to 20 wt%, exhibiting a clear linear correlation with the surface content of Cu0 on the catalyst. Meanwhile, this result confirms that Cu0 plays a crucial role in CO oxidation of Cu/Al2O3. However, commercial α-Al2O3 reaches its highest activity when the Cu load is 5%, and then its activity begins to decrease due to the agglomeration of particles. Moreover, Cu/Al2O3-nf-CVD also exhibits remarkable thermal stability for CO oxidation. This work highlights a new strategy to synthesis of high Cu loading amount, high activity and thermostable Cu/Al2O3 catalyst for low-temperature oxidation of CO.

Construction of La1-xSrxNiO3/g-C3N4 type-Z heterojunctions with enhanced visible-light photocatalytic degradation of organic pollutants

Lanthanum nickelate (LaNiO3), known for its high visible-light absorption, is a promising photocatalyst for water purification. However, the low conduction band position and high photogenerated carrier complexation rate of pure LaNiO3 limit its photocatalytic activity. To address this issue, we investigated the synergistic effects of doping and constructing heterojunctions. A La0.9Sr0.1NiO3 (20%)/g-C3N4 (L2CN8) heterojunction was successfully created. In addition, various characterisation techniques were then employed to analyse the structure-performance relationships of these heterojunction photocatalysts in degrading organic dyes. Results revealed that at a 10% Sr doping level, the oxygen vacancy content was 0.68, which is significantly higher than that of LaNiO3 (0.05). The increased number of oxygen vacancies enhanced the electron capture ability and improved the separation efficiency of photogenerated carriers. Furthermore, the optimised L2CN8 (20 mg) achieved 81.2% and 73.8% removal of methylene blue (50.0 mL, 10 mg L-1) and tetracycline (50.0 mL, 10 mg L-1) under simulated visible-light irradiation (λ > 420 nm). Furthermore, an active species capture experiment confirmed the significant role of superoxide radicals (·O2-) in the degradation process. Based on these experimental findings, we proposed a rational Z-type charge transfer mechanism. This study holds great importance for water pollution control and environmental protection.

Dual cross-linked cellulose-based hydrogel for dendrites-inhibited flexible zinc-ion energy storage devices with ultra-long cycles and high energy density

Hydrogel electrolytes, renowned for their mechanical robustness and versatility, are crucial in ensuring stable energy output in flexible energy storage devices. This work presents a dual cross-linked cellulose-based hydrogel electrolyte with chemical cross-linking from covalent bonding and physical cross-linking from hydrogen bonding. This electrolyte demonstrated outstanding mechanical strength and porous structure with abundant hydroxyl groups, which facilitates the migration of Zn2+ and suppresses the formation of undesirable zinc dendrite, thereby enhancing the ion conductivity (18.46 ± 0.39 mS cm-1 at room temperature) and extending electrochemical stability window (0-2.23 V). Zn||Zn symmetric cells based on this electrolyte demonstrated stable stripping/plating cycles of 3000 h at a current density of 1 mA cm-2. Furthermore, the corresponding flexible zinc-ion hybrid capacitor retains a 90.3 % capacity over 100,000 cycles at 10 A g-1, while remaining functional across various folding angles. Hence, this biomass-derived hydrogel electrolyte holds promise for flexible energy storage device applications.

THP as a sensor for the electrochemical detection of H2O2

Hydrogen peroxide (H2O2) detection is paramount in biological and clinical domains due to its pivotal role in various physiological and pathological processes. This molecule is a crucial metabolite and effector in cellular redox mechanisms, influencing diverse cellular signaling pathways and bolstering the body's defense mechanisms against infection and oxidative stress. Organic molecule-based electrodes present unique advantages such as operational versatility and scalability, rendering them attractive candidates for sensor development across diverse fields encompassing food safety, healthcare, and environmental monitoring. This study explores the electrochemical properties of a tris(3-hydroxypyridin-4-one) THP, which has been unexplored in electrochemical sensing. Leveraging THP's chelating properties, we aimed to develop an electrochemical probe for hydrogen peroxide detection. Our investigations reveal promising results, with the developed sensor exhibiting a low limit of detection (LOD) of 144 nM, underscoring its potential utility in sensitive and selective H2O2 detection applications. In addition, the new sensor was also tested on fetal bovine serum (FBS) to emphasize future applications on biological matrices. This research signifies a significant stride in advancing electrochemical sensor technologies for hydrogen peroxide detection with several novelties related to the usage of THP, such as high sensitivity and selectivity, performance in biological matrices, repeatability, stability, and reproducibility, economical and practical advantages. This research opens new avenues for enhanced biomedical diagnostics and therapeutic interventions.

Self-assembled bacterial cellulose-based photo-enzyme coupled system enabled by visible light-driven for efficient dye degradation

To achieve efficient dye degradation, we reported a visible light-driven biomass photo-enzyme coupled system, which was constructed by assembling g-C3N4 during in situ culture and immobilizing laccase via metal-organic framework (MOF). Benefited from the network and porous structure of bacterial cellulose (BC), the g-C3N4 could be stably interspersed, and MOF grew g-C3N4/BC to encapsulate laccase. BC improves the reusability of the system, while combined with MOF encapsulation, avoiding direct contact between photo- and enzyme- catalysts. Importantly, thanks to the existence of electron transfer from photocatalysis to enzyme, the photogenerated electron hole recombination within the photocatalyst reduced, improving catalyzed reaction efficiency. The degradation efficiency of the catalysis system within 10 min for methylene blue and rhodamine B could reach 100 % and 96.1 %, respectively, which could rapidly degrade dye and recycle for more than 10 times. This research can shine new light on the development of advanced wastewater treatment.

Substrate access tunnel engineering of a Fe-type nitrile hydratase from Pseudomonas fluorescens ZJUT001 for substrate preference adjustment and catalytic performance enhancement

Substrate access tunnel engineering is a useful strategy for enzyme modification. In this study, we improved the catalytic performance of Fe-type Nitrile hydratase (Fe-type NHase) from Pseudomonas fluorescens ZJUT001 (PfNHase) by mutating residue Q86 at the entrance of the substrate access tunnel. The catalytic activity of the mutant PfNHase-αQ86W towards benzonitrile, 2-cyanopyridine, 3-cyanopyridine, and 4-hydroxybenzonitrile was enhanced by 9.35-, 3.30-, 6.55-, and 2.71-fold, respectively, compared to that of the wild-type PfNHase (PfNHase-WT). In addition, the mutant PfNHase-αQ86W showed a catalytic efficiency (kcat/Km) towards benzonitrile 17.32-fold higher than the PfNHase-WT. Interestingly, the substrate preference of PfNHase-αQ86W shifted from aliphatic nitriles to aromatic nitrile substrates. Our analysis delved into the structural changes that led to this altered substrate preference, highlighting an expanded entrance tunnel region, theenlarged substrate-binding pocket, and the increased hydrophobic interactions between the substrate and enzyme. Molecular dynamic simulations and dynamic cross-correlation Matrix (DCCM) further supported these findings, providing a comprehensive explanation for the enhanced catalytic activity towards aromatic nitrile substrates.

Base on photothermal interfacial molecular transfer for efficient biodiesel catalysis via enzyme@cyclodextrin metal-organic frameworks loaded MXene

Efficient, green and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Therefore, we construct a new strategy with photothermal interfacial molecular transfer for green and efficient biodiesel catalysis. We encapsulate Candida albicans lipase B (CalB) in a γ-cyclodextrin metal-organic framework (γ-CD-MOF) loading with Ti3C2TX by in situ growth and electrostatic assembly. The γ-CD-MOF not only protects the fragile enzyme, but also enhances the catalytic performance through the synergistic effects of porous adsorption (MOF pore structure) and interfacial enrichment (cyclodextrins host-guest assembly structure) for accelerating substrate transfer (642.6 %). The CalB@γ-CD-MOF/MXene-i activity can be regulated up to 274.6 % by exposure to near-infrared (NIR). Importantly, CalB@γ-CD-MOF/MXene-i achieves 93.3 % biodiesel conversion under NIR and maintained 86.9 % activity after 6 cycles. Meanwhile, the MXene after the CalB@γ-CD-MOF/MXene catalytic cycle can be almost completely recovered. We verify the mechanism of high catalytic activity of γ-CD-MOF and rationalize the mechanism of CD molecular channel by DFT. Therefore, this highly selective enzyme catalytic platform offers new possibilities for green and efficient preparation of bioenergy.

Ru nanocrystals modified porous FeOOH nanostructures with open 3D interconnected architecture supported on NiFe foam as high-performance electrocatalyst for oxygen evolution reaction and electrocatalytic urea oxidation

The construction of binder-free electrodes with well-defined three-dimensional (3D) morphology and optimized electronic structure represents an efficient strategy for the design of high-performance electrocatalysts for the development of efficient green hydrogen technologies. Herein, Ru nanocrystals were modified on 3D interconnected porous FeOOH nanostructures with open network-like frameworks on NiFe foam (Ru/FeOOH@NFF), which were used as an efficient electrocatalyst. In this study, a 3D interconnected porous FeOOH with an open network structure was first electrodeposited on NiFe foam and served as the support for the in-situ modification of Ru nanocrystals. Subsequently, the Ru nanocrystals and abundant oxygen vacancies were simultaneously incorporated into the FeOOH matrix via the adsorption-reduction method, which involved NaBH4 reduction. The Ru/FeOOH@NFF electrocatalyst shows a large specific surface area, abundant oxygen vacancies, and modulated electronic structure, which collectively result in a significant enhancement of catalytic properties with respect to the oxygen evolution reaction (OER) and urea oxidation reaction (UOR). The Ru/FeOOH@NFF catalyst exhibits an outstanding OER performance, requiring a low overpotential (360 mV) at 200 mA cm-2 with a small Tafel slope (58 mV dec-1). Meanwhile, the Ru/FeOOH@NFF catalyst demonstrates more efficient UOR activity for achieving 200 mA cm-2 at a lower overpotential of 272 mV. Furthermore, an overall urea electrolysis cell using the Ru/FeOOH@NFF as the anode and Pt as the cathode (Ru/FeOOH@NFF||Pt) reveals a cell voltage of 1.478 V at 10 mA cm-2 and a prominent durability (120 h at 50 mA cm-2). This work will provide a valuable understanding of the construction of high-performance electrocatalysts with 3D microstructure for promoting urea-assisted water electrolysis.