Current management strategies in Osgood Schlatter: A cross-sectional mixed-method study

BACKGROUND

Osgood Schlatter disease (OSD) is the most common knee condition in adolescent athletes aged 9-16. Without evidence to guide clinical practice, it is unclear how OSD is managed. The aim of this study was to investigate how international healthcare professionals (general practitioners, physiotherapists, rheumatologists, sports and exercise medicine doctors, and orthopedic surgeons) diagnose and manage OSD.

METHODS

This mixed-method study used a convergent parallel design. A quantitative questionnaire and semi-structured interview covered prognosis, diagnosis, treatment, and return to play of adolescents with OSD. For quantitative data, those who reported likely/very likely considered "for" and unlikely/very unlikely "against" (for specific diagnostic/management strategy). Qualitative data analysis used a phenomenological approach.

RESULTS

Two hundred and fifty-one healthcare professionals completed the questionnaire. The most common diagnostic criterion was pain at the tibial tuberosity (97% for). The most common treatments were patient education (99%) and exercise therapy (92%). Other treatment options were more heterogeneous, for example, pain medication (31% for and 34% against). Managing training load (97%), pain intensity (87%), and psychological factors (86%) were considered the most important factors influencing the return to activities. Several themes emerged from the interviews (on N = 20) including imaging, pain management, family, and psychosocial factors influencing prognosis.

CONCLUSION

Diagnosis criteria of OSD were relatively well agreed upon, whereas the triangulation of qualitative and quantitative data showed heterogeneity of treatments. Psychosocial factors including family were highlighted as critical in the management of OSD.

Influence of the chitosan morphology on the properties of acrylic cements and their biocompatibility

Acrylic bone cements (ABC) are materials widely used in orthopedics and biomedical applications. Several active compounds have been introduced to ABC formulations to improve their mechanical properties and bifunctionality. In this research, we studied the effect of the addition of chitosan (CS) microspheres and chitosan sheets on ABC formulations. For mechanical performance optimization, the compression strength was taken as a response variable using an extreme vertices mixing design with fraction by weight of CS and poly(methyl methacrylate) (PMMA) as the variable factors. According to the statistical analysis, the control samples (without CS), samples with 7% (wt.) of CS sheets, and samples with 17% (wt.) of CS spheres presented the best compression properties: 90.6 MPa and 95.6 MPa, respectively. The study of these formulations confirmed that CS spheres allow a higher amount of loading on the formulation, maintaining comparable compression strength. By ¹H-NMR, it was observed that the residual monomer was similar in all wording. The hydrolytic degradation assay in simulated body fluid (SBF) determined that the sphere incorporation increased by 50% and 35% for the water uptake and weight loss values, respectively, when compared with the reported values with CS sheets. By morphological analysis via SEM, it was observed that the porosity increased considerably in the presence of CS spheres throughout the immersion time in SBF. The subdermal implant results demonstrated excellent compatibility between the cement studied and the biological environment.

Acrylic bone cements (ABC) are materials widely used in orthopedics and biomedical applications.

Rotary-jet spun polycaprolactone/nano-hydroxyapatite scaffolds modified by simulated body fluid influenced the flexural mode of the neoformed bone

Polycaprolactone (PCL) is a biocompatible, biodegradable synthetic polymer which in combination with nanohydroxyapatite (nHAp) can give rise to a low cost, nontoxic bioactive product with excellent mechanical properties and slow degradation. Here we produced, characterized and evaluated in vivo the bone formation of PCL/nHAp scaffolds produced by the rotary jet spinning technique. The scaffolds produced were firstly soaked into simulated body fluid for 21 days to also obtain nHAp onto PCL/nHAp scaffolds. Afterwards, the scaffolds were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy and Raman spectroscopy. For in vivo experiments, 20 male Wistar rats were used and randomly divided in 4 experimental groups (n = 5). A critical defect of 3 mm in diameter was made in the tibia of the animals, which were filled with G1 control (clot); G2-PCL scaffold; G3-PCL/nHAp (5%) scaffold; G4-PCL/nHAp (20%) scaffold. All animals were euthanized 60 days after surgery, and the bone repair in the right tibiae were evaluated by radiographic analysis, histological analysis and histomorphometric analysis. While in the left tibias, the areas of bone repair were submitted to the flexural strength test. Radiographic and histomorphometric analyses no showed statistical difference in new bone formation between the groups, but in the three-point flexural tests, the PCL/nHAp (20%) scaffold positively influenced the flexural mode of the neoformed bone. These findings indicate that PCL/nHAp (20%) scaffold improve biomechanical properties of neoformed bone and could be used for bone medicine regenerative.

Acrylic Bone Cement Incorporated with Low Chitosan Loadings

Despite the potential of acrylic bone cement (ABC) loaded with chitosan (CS) for orthopedic applications, there are only a few in vitro studies of this composite with CS loading ≤ 15 wt.% evaluated in bioactivity tests in simulated body fluid (SBF) for duration > 30 days. The purpose of the present work was to address this shortcoming of the literature. In addition to bioactivity, a wide range of cement properties were determined for composites with CS loading ranging from 0 to 20 wt.%. These properties included maximum exotherm temperature (T_max), setting time (t_set), water contact angle, residual monomer content, flexural strength, bending modulus, glass transition temperature, and water uptake. For cement with CS loading ≥ 15 wt.%, there was an increase in bioactivity, increase in biocompatibility, decrease in T_max, increase in t_set, all of which are desirable trends, but increase in residual monomer content and decrease in each of the mechanical properties, with each of these trends, were undesirable. Thus, a composite with CS loading of 15 wt.% should be further characterized to explore its suitability for use in low-weight-bearing applications, such as bone void filler and balloon kyphoplasty.

Pre-operative MRI measurements versus anthropometric data: Which is more accurate in predicting 4-stranded hamstring graft size in anterior cruciate ligament reconstruction?

Background/objective

Graft diameter has been shown to play an important role in anterior cruciate ligament (ACL) autograft failure rates. The roles of pre-operative MRI measurement of graft size and anthropometric data have been studied in the prediction of hamstring graft size. Pre-operative knowledge of hamstring graft diameter allows surgeons to perform better surgical planning and provides an opportunity to discuss with patients on alternative graft options such as allografts should the need arises. The purpose of this study was to compare the accuracy of pre-operative anthropometric data and MRI measurements in the prediction of 4-stranded hamstring autograft size in anterior cruciate ligament reconstruction.

Method

This was a cohort study involving 141 subjects (115 males and 26 females) who underwent a single bundle ACL reconstruction utilising a 4-stranded hamstring graft by a single surgeon from 2008 to 2012. Pre-operatively, the height, weight, body mass index (BMI), age, gender and smoking status was recorded. The MRI scans used for diagnosis were utilized to measure the gracilis (GT) and semi-tendinosus (ST) cross sectional area (CSA).

Result

We found the strongest correlation between Combined (ST + GT) CSA and intra-operative graft size (r = 0.596, p < 0.001). This was followed by ST CSA (r = 0.570,p < 0.001), Body surface area (r = 0.507,p < 0.001), and GT CSA (r = 0.460,p < 0.001). No significant correlation was found between 2 anthropometric data (Age and BMI). There was also no significant difference between different strengths of MRIs (1.5T vs 3.0T) in determining the intra-operative graft size (p = 0.438).

Conclusion

We conclude that pre-operative MRI is superior to anthropometric variables in predicting the size of 4-stranded hamstring autografts used in ACL reconstruction.

Smaller cross-sectional areas of the hamstring tendon measured from preoperative ultrasonography are likely to need additional gracilis harvesting for double-bundle anterior cruciate ligament reconstructions

BACKGROUND/PURPOSE

Hamstring tendon autografts are commonly used for double-bundle anterior cruciate ligament reconstruction (DB-ACLR). If the volume of the semitendinosus (ST) tendon is insufficient, the gracilis (G) tendon is also harvested. Additional harvesting of the G autograft can affect patients' short-term postoperative outcome, such as muscle recovery; thus, preoperative information about whether an additional G autograft is needed would be useful. The purpose of this study was to investigate whether preoperative measurement of the ST tendon using ultrasonography could inform the intraoperative decision to harvest the G tendon.

METHODS

We enrolled 20 patients (13 men and seven women) who underwent DB-ACLR between October 2017 and March 2019. The mean patient age was 28.5 years. The ipsilateral ST tendon was measured using ultrasonography before surgery. Measurements included the diameter and breadth of the short-axis image. The cross-sectional area (CSA) was calculated from these measurements. During surgery, when two grafts with diameters of ≥ 5.0 mm could not be made, the G tendon was also harvested. Patients were categorized into two groups: the ST group where only the ST tendon was harvested, and the semitendinosus gracilis tendon (STG) group where the ST and G tendons were both harvested. The CSA value was compared between the two groups, and the cutoff value was calculated.

RESULTS

In the ST group (n = 8), the mean diameter and breadth of the semitendinosus tendon were 4.21 and 2.34 mm, respectively. In the STG group (n = 12), the mean diameter and breadth of the ST tendon were 3.39 and 1.78 mm, respectively. The CSAs calculated for the ST group and the STG group were 7.74 mm² and 4.79 mm², respectively. A cutoff value of 7.0 mm² was found to correspond to a specificity and sensitivity to harvest the G tendon of 87.5% and 75.0%, respectively.

CONCLUSIONS

The preoperative CSA of the ST tendon determined using ultrasonography can, therefore, be informative for deciding whether to harvest the G tendon for DB-ACLR. The results of this study provide valuable information for graft selection in anterior cruciate ligament reconstruction.

LEVEL OF EVIDENCE

IV (Retrospective case series design).

CREATION OF A LOW-COST ENDOSCOPIC FLAVECTOMY TRAINING MODEL

ABSTRACT Objective The objective of the study was the development of a low cost simulator of the endoscopic lumbar spine flavectomy technique for use as a teaching method in order to make endoscopic training more accessible. Methods The study was a descriptive research project conducted at the Orthopedic Skills Laboratory of the Health Sciences Department of the Federal University of Paraná. Easily accessible, low cost materials, such as a commercial-use mannequin, EVA plastic, PVC and copper tubing were used to develop the simulator.. Results At the end of the project, it was possible to build a simulator of the endoscopic lumbar spine flavectomy technique with a budget of approximately 464 BRL, or approximately 140 USD. Conclusions We concluded that it was possible to build an endoscopic lumbar spine flavectomy technique simulator on a budget of less than half a Brazilian minimum monthly wage, which makes training more accessible to academics, residents and surgeons. Level of Evidence V; Expert opinion.

Comparison of efficacy between combined periarticular and incisional injections versus periarticular injection alone of bupivacaine for pain control after total knee arthroplasty: A prospective randomized controlled trial

OBJECTIVE

The aim of this study was to compare the efficacy of combined periarticular and incisional injections versus periarticular injection alone of bupivacaine in reducing post-operative pain after total knee arthroplasty (TKA).

METHODS

In this prospective, randomized, double-blind comparative study, 90 patients with primary osteoarthritis who underwent TKA were enrolled. The patients were then randomly divided into 3 groups (30 in each): group 1, without injection; group 2, with periarticular injection of 20 mL 0.5% bupivacaine hydrogen chloride (HCl) (100 mg) after implantation; and group 3, periarticular injection of 20 mL 0.5% bupivacaine HCl (100 mg) after implantation and incisional injection of 10 mL 0.5% bupivacaine HCl (50 mg) before wound closure. Post-operative pain levels were measured using a 100-mm visual analogue scale (VAS) (0 mm: no pain and 100 mm: worst pain) at 30 min and 1, 2, 4, and 6 h, post-operatively.

RESULTS

The mean VAS score in group 3 (the combined group-periarticular and incisional injections) within the first 4 h was lower than that in group 1 and group 2 (p<0.001). The mean VAS scores at the first 30 min were 65.21±9.46 in group 1, 51.86±5.96 in group 2, and 29.33±8.55 in group 3 (p<0.001). The mean VAS scores at the first 1 h were 64.43±9.32 in group 1, 47.26±4.77 in group 2, and 31.66±7.37 in group 3 (p<0.001). The mean scores at the 2 h were 61.46±8.62 in group 1, 48.33±4.66 in group 2, and 30.83±6.76 in group 3 (p<0.001). The mean scores at the 4 h were 64.72±8.91 in group 1, 47.53±4.35 in group 2, and 34.36±6.64 in group 3 (p<0.001). The differences were not significant at 6 h between group 2 (44.91±4.12) and group 3 (41.83±6.71) (p>0.001). However, the values were significantly lower than those of the control group (63.56±9.73) (p<0.001). In addition, VAS scores at all follow-up times were significantly higher in the control group compared with the other groups (p<0.001).

CONCLUSION

Evidence from this study revealed that the combined injection of bupivacaine is more effective than its periarticular injection alone and provides effective post-operative pain management after TKA.

LEVEL OF EVIDENCE

Level I, Therapeutic study.

Osteochondritis Dissecans of the Knee: Etiology and Pathogenetic Mechanisms. A Systematic Review

OBJECTIVE

The purpose of this manuscript is to analyze the evidence regarding etiopathogenesis of knee osteochondritis dissecans (OCD) lesions through a systematic review, so to summate the current understanding of the origin and progression of this pathologic articular processes.

DESIGN

A systematic review of the literature was performed on the PubMed and Cochrane databases on October 2017 by 2 independent authors and included all levels of evidence. This included all English language literature, pertaining specifically to etiopathology of knee OCD with exclusions for review articles and expert opinion. Of 965 identified records, 154 full-text articles were assessed for eligibility and 86 studies met the inclusion criteria.

RESULTS

According to these studies, the etiology of OCD can be of a biological or mechanical origin: 40 articles proposed a biological hypothesis, including genetic causes (27), ossification center deficit (12), and endocrine disorders (9); conversely, 52 articles supported a mechanical hypothesis, including injury/overuse (18), tibial spine impingement (5), discoid meniscus (16), and biomechanical alterations (20) as the cause of the onset of OCD. The pathogenic processes were investigated by 36 of these articles, with a focus on subchondral bone fracture and ischemia as the ultimate events leading to OCD.

CONCLUSIONS

Biological and mechanical factors are found to result in subchondral bone remodeling alterations, acting independently or more likely synergically in the progression of knee OCD. The former includes genetic causes, deficit of ossification centers and endocrine disorders; the latter, tibial spine impingement, discoid meniscus, and biomechanical alterations, together with injuries and overuse. The resultant subchondral bone ischemia and/or fracturing appears to determine the onset and progression of OCD.

LEVEL OF EVIDENCE

Systematic review of level II-IV studies, level IV.

Polymethyl Methacrylate-Based Bone Cements Containing Carbon Nanotubes and Graphene Oxide: An Overview of Physical, Mechanical, and Biological Properties

Every year, millions of people in the world get bone diseases and need orthopedic surgery as one of the most important treatments. Owing to their superior properties, such as acceptable biocompatibility and providing great primary bone fixation with the implant, polymethyl methacrylate (PMMA)-based bone cements (BCs) are among the essential materials as fixation implants in different orthopedic and trauma surgeries. On the other hand, these BCs have some disadvantages, including Lack of bone formation and bioactivity, and low mechanical properties, which can lead to bone cement (BC) failure. Hence, plenty of studies have been concentrating on eliminating BC failures by using different kinds of ceramics and polymers for reinforcement and also by producing composite materials. This review article aims to evaluate mechanical properties, self-setting characteristics, biocompatibility, and bioactivity of the PMMA-based BCs composites containing carbon nanotubes (CNTs), graphene oxide (GO), and carbon-based compounds. In the present study, we compared the effects of CNTs and GO as reinforcement agents in the PMMA-based BCs. Upcoming study on the PMMA-based BCs should concentrate on trialing combinations of these carbon-based reinforcing agents as this might improve beneficial characteristics.

Preoperative prediction of autologous hamstring graft diameter in anterior cruciate ligament reconstruction

BACKGROUND AND OBJECTIVE

Currently, there is no stablished pre-operative model that helps the orthopaedic surgeon predict the final graft diameter in anterior cruciate ligament reconstruction (ACLR). The purpose of this study was to determine whether there is a correlation between semitendinosus (ST) and gracilis (GT) cross-sectional area (CSA) evaluated pre-operatively in mm² using magnetic resonance imaging (MRI) and the final intra-operative ST-GT autograft diameter in mm².

METHODS

A retrospective study was designed, 89 patients undergoing ACLR with hamstring autograft participated. We analysed ST-CSA (mm²) and GT-CSA (mm²) using pre-operative MRI, intra-operative autograft diameter, age, sex, side of the injury, weight, height and body mass index (BMI).

RESULTS

A moderate-strong correlation was identified between final autograft diameter and ST-GT CSA in MRI (Pearson correlation coefficient .6911 P<.001). We observed that, if the combination of ST-CSA and GT-STA is at least 19mm², the probability of obtaining an autograft with a diameter greater than or equal to 8mm is 91.8% or more. The ROC curve analysis demonstrated, in this model, that this predictive method on MRI correctly discriminates in over 95.6% of cases between achieving or otherwise an autograft greater than or equal to 8mm during surgery. Intra and interobserver concordance of the MRI measurements were excellent, as shown in the intraobserver intraclass correlation coefficient (CCI) of .79 and the interobserver CCI of .84 and .77 for the ST and GT respectively.

CONCLUSIONS

Preoperative determinations of ST-CSA and GT-CSA (mm²) using MRI correlate with the final autograft diameter. This method represents a reliable and reproducible model to predict the hamstring autograft diameter in ACLR.

LEVEL OF EVIDENCE

Retrospective cohort study, level IV.

CLINICAL RELEVANCE

A review of the available literature reveals a higher risk of ACL failure or re-rupture if the graft is smaller than 8mm in diameter. Despite being an important factor there is no established pre-operative model that predicts the final graft diameter. Knowing beforehand the possibilities of obtaining a hamstring autograft with a diameter greater than or equal to 8mm would help the orthopaedic surgeon to better plan the surgery and to anticipate the need for other graft options (such as bone-patellar-tendon-bone autograft or allografts, amongst other alternatives).

A review of calcium phosphate cements and acrylic bone cements as injectable materials for bone repair and implant fixation

Treatment of bone defects caused by trauma or disease is a major burden on human healthcare systems. Although autologous bone grafts are considered as the gold standard, they are limited in availability and are associated with post-operative complications. Minimally invasive alternatives using injectable bone cements are currently used in certain clinical procedures, such as vertebroplasty and balloon kyphoplasty. Nevertheless, given the high incidence of fractures and pathologies that result in bone voids, there is an unmet need for injectable materials with desired properties for minimally invasive procedures. This paper provides an overview of the most common injectable bone cement materials for clinical use. The emphasis has been placed on calcium phosphate cements and acrylic bone cements, while enabling the readers to compare the opportunities and challenges for these two classes of bone cements. This paper also briefly reviews antibiotic-loaded bone cements used in bone repair and implant fixation, including their efficacy and cost for healthcare systems. A summary of the current challenges and recommendations for future directions has been brought in the concluding section of this paper.

Chondrotoxicity of Local Anesthetics: Liposomal Bupivacaine Is Less Chondrotoxic than Standard Bupivacaine

Objective

The purpose of this study is to determine whether (1) liposomal bupivacaine is chondrotoxic; (2) the chondrotoxicity of liposomal bupivacaine differs from standard bupivacaine; and (3) chondrotoxic effects are time dependent.

Materials and Methods

We obtained 72 10 mm articular cartilage plugs from 12 fresh bovine distal femoral knee joints and exposed them to either saline, 0.5% bupivacaine, or liposomal bupivacaine for either 30 or 90 minutes. Twenty-four hours after treatment, chondrocyte viability was measured with the use of a fluorescent live/dead assay. An ANOVA test of variance was performed followed by a Holm-Sidak test to make pairwise comparisons across conditions. Student's t-test was used to compare means.

Results

Percent viability of cells exposed to liposomal bupivacaine for 30 minutes was less versus saline control (53.9% ± 21.5% vs. 73.7 ± 18.4%, p=0.035), and this remained significant at 90 minutes (49.1% ± 20.3% vs. 67.2% ± 25.6%, p < 0.001). Liposomal bupivacaine had less chondrotoxic effects when compared with bupivacaine after 90 minutes, with greater viability (49.1% ± 20.3% vs. 21.4% ± 14.0%, p=0.003). Chondrotoxicity was found to be time dependent within the bupivacaine group (percent viability at 30 min: 45.5 ± 18.2%, 90 min: 21.4 ± 14.0%, p=0.001); however, liposomal bupivacaine did not demonstrate a significant time-dependent chondrotoxic relationship (p=0.583).

Conclusions

Bupivacaine and liposomal bupivacaine are both toxic to chondrocytes. Liposomal bupivacaine is less chondrotoxic than standard bupivacaine and does not demonstrate a time-dependent toxicity.

Molten metal high pressure injection injury of the hand

The second case of high temperature molten metal, high-pressure injection injury of the hand is reported here. Like in the previous case, there was an innocent-looking entry point with deep thermal injury to the flexor tendons and the digital nerves that appeared a few days after the injury and lead to finger amputation. LEVEL OF EVIDENCE: 5.

Conservative treatment of Osgood-Schlatter disease among young professional soccer players

BACKGROUND

The present-day conservative treatment algorithms of Osgood-Shlatter Disease (OSD) are often inadequate for young athletes because they require extremity immobilization and avoidance of sports, and hence the longer duration of rehabilitation. Therefore, the development of safe and efficacious treatment protocols for young athletes is of great practical importance.

THE AIM OF THE STUDY

The aim of the study was to assess the efficacy and safety of the conservative treatment of Osgood-Schlatter disease in young professional soccer players.

MATERIALS AND METHODS

Medical records of young soccer players from two different Russian soccer-academies from the period January 2016-July 2019 were analyzed in a retrospective cohort study. Trauma records of young soccer players aged 11-15 years were included in the analysis. Statistical analysis was performed using IBM SPSS Statistics software, 23.0. Descriptive statistics tools were applied for the analysis.

RESULTS

A total of 280 soccer players were included in the study. The aged ranged between 11 and 15 years. Ten percent of players (n = 28, mean age 12.9 ± 1.3) were diagnosed with OSD during the observation period. The mean OSD treatment duration was 27.3 ± 13.9 days. Bilateral symptoms were observed in 42.9% of cases, and unilateral symptoms in 57.1%. In 53.6% of players, the first manifestation of OSD symptoms was observed during wintertime. All players were training on artificial turf playing fields. Conservative treatment without immobilization was applied to all patients. It included kinesiotherapy for quadriceps muscle lengthening and physiotherapy as well as gradual increase of physical activity. A total of 35.7% of players reported having discomfort upon resuming regular training, which caused some restrictions in exercise. However, the symptoms resolved spontaneously with time. Surgical treatment or complete avoidance of exercise was not used in any of the patients.

CONCLUSION

High incidence of OSD was revealed among young soccer players of the leading Russian soccer academies. The OSD most commonly occurred during wintertime. Conservative treatment of OSD-i.e., physiotherapy and kinesiotherapy-enabled disease-free resuming of sports activity for the majority of patients.

Indications and results of osteosynthesis for proximal humerus fragility fractures in elderly patients

Proximal humerus fractures (PHF) are common injuries in the elderly population. Conservative treatment is indicated for undisplaced and stable fractures, which account for almost 80% of the cases. More complex fracture patterns might need surgery, with a wide variety of indication criteria and surgical techniques described in the literature. Surgical treatment should be reserved for patients in good clinical conditions, autonomous in daily living activities and able to adhere to postoperative rehabilitation protocols. In the elderly population with severe osteoporosis, cognitive impairment and clinical comorbidities, the risk of surgical failures is high. In these patients, the choice between surgical and conservative treatment, as well as for the type of procedure, is even more difficult, with no general consensus in the literature. Final indication is usually conditioned by surgeon's experience and preference. Two independent reviewers (B.H and G.G) independently extracted studies on proximal humeral fractures. All selected studies were screened independently (B.H and G.G) based on title and abstract. Then the full text of any article that either judged potentially eligible was acquired and reviewed again. Any disagreement was resolved by discussing the full text manuscripts. Aim of the present paper is to review the literature about indications and results of osteosynthesis for proximal humerus fragility fractures in the elderly population.

Anatomic femoral tunnel creation during anterior cruciate ligament reconstruction using curved dilator system

PURPOSE

Recently, tunnel placements in anatomic positions have been emphasized for successful restoration of knee function after anterior cruciate ligament (ACL) reconstruction. The anteromedial portal technique is considered to be more favorable than the transtibial technique for anatomic femoral tunnel placements; however, it has some technical disadvantages. To minimize these disadvantages, the authors developed the curved dilator system (CDS). The purpose of this study was to evaluate the femoral tunnel position, length, and intraoperative complications with CDS.

METHODS

Sixty-two consecutive patients who underwent ACL reconstruction with CDS were subjects of this study. The femoral tunnel was created using a 4.5 mm-diameter curved guide trocar and was widened in a step-by-step manner, increasing by 1 mm dilator diameter to match the graft with the knee flexed to slightly over 90°. Femoral tunnel positions were evaluated by the quadrant method from postoperative computed tomographic images. Femoral tunnel length was measured using the curved depth gauge during surgery. Complications such as posterior wall blowout and cartilage damage were checked intraoperatively. Peroneal nerve injury was observed during the hospital stay.

RESULTS

Femoral tunnel position was 32.7% ± 5.4% and 39.1% ± 5.9% in the superior-inferior and anterior-posterior positions, respectively. Femoral tunnel length was 39.2 ± 4.1 mm. Damage to medial femoral condyle cartilage, posterior wall blowout, and peroneal nerve injury did not occur in any case.

CONCLUSION

ACL reconstruction with CDS resulted in anatomic positioning of the femoral tunnel and sufficient femoral tunnel length without intraoperative complications.

Complications and Return to Activity After Arthroscopic Repair of Isolated Type II SLAP Lesions: A Systematic Review Comparing Knotted Versus Knotless Suture Anchors

Background:

Superior labral anterior to posterior (SLAP) tears are one of the most common injuries to the shoulder, with the type II variant representing the most frequently encountered subtype.

Purpose:

To systematically review the literature to better understand outcomes after arthroscopic repair of isolated type II SLAP lesions using knotted versus knotless anchors based on implant number, implant location, patient position, and portal position.

Study Design:

Systematic review; Level of evidence, 4.

Methods:

A systematic review investigating all studies in the literature between January 2000 and June 2019 reporting on patients undergoing arthroscopic repair for isolated type II SLAP lesions using knotted versus knotless suture anchors was performed following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines using the PubMed, BIOSIS Previews, SPORTDiscus, PEDro, and Embase databases.

Results:

A total of 234 patients undergoing isolated arthroscopic repair of type II SLAP lesions using suture anchors were identified, with 76% (179/234) treated using knotted anchors versus 24% (55/234) treated using knotless anchors. Complications were reported in 12% of patients treated using knotted anchors versus no patients treated using knotless anchors (P = .008). The incidence of complications for knotted anchor repair was not significantly affected by patient position (P = .22) or portal position (P = .19). Using multiple regression analysis, we found no significant association with the incidence of complications when analyzing for anchor design (R² = 0.02; P = .06) or anchor position (R² = 0.02; P = .92). No significant difference in return-to-activity timing was appreciated based on anchor type (P = .28), patient position (P = .98), or portal position (P = .97) in patients treated using knotted anchors.

Conclusion:

Patients treated using knotted anchors were significantly more likely to experience a postoperative complication compared with patients treated using knotless anchors after arthroscopic repair of isolated type II SLAP lesions. Despite the increased incidence of a postoperative complication after knotted anchor fixation compared with knotless anchor fixation, multiple regression analysis showed that anchor design and anchor position were not significantly predictive of the incidence of complications. Given the increasing popularity of knotless anchor fixation, further study on the long-term outcomes after knotless repair for isolated type II SLAP lesions is warranted.

Incorporation of chitosan/graphene oxide nanocomposite in to the PMMA bone cement: Physical, mechanical and biological evaluation

One of the most popular types of bone cements is polymethylmethacrylate (PMMA). The properties of this bone cement have attracted many researchers effort to modify its properties. In this study, after preparation of chitosan (Cs) powder and Cs/graphene oxide (GO) nanocomposite powder, they were added homogeneously to the PMMA bone cement with different percentages. The results showed that the addition of 25 wt% of Cs/GO nanocomposite powder to the PMMA bone cement cause to increase the compressive strength by 16.2%, the compressive modulus by 69.1% and the bending strength by 24.0%. The obtained results showed that by adding Cs/GO nanocomposite powder to the PMMA bone cement, setting time and injectability were increased, maximum temperature was decreased and apatite-like deposition was increased after 4 weeks of incubation in SBF solution. The results of MG-63 cell culture confirmed the improvement of cell viability, growth and cell adhesion for 25 wt% PMMA-Cs/GO composite bone cement. Therefore, it can be concluded that 25 wt% PMMA-Cs/GO composite bone cement with improved mechanical, physical and biological properties can be a good replacement for common commercial bone cements in orthopedic applications.

Activity Modification and Knee Strengthening for Osgood-Schlatter Disease: A Prospective Cohort Study

Background:

Osgood-Schlatter disease (OSD) affects 1 in 10 adolescents. There is a lack of evidence-based interventions, and passive approaches (eg, rest and avoidance of painful activities) are often prescribed.

Purpose:

To investigate an intervention consisting of education on activity modification and knee-strengthening exercises designed for adolescents with OSD.

Study Design:

Case series; Level of evidence, 4.

Methods:

This study included 51 adolescents (51% female; age range, 10-14 years) with OSD. The 12-week intervention consisted of an activity ladder designed to manage patellar tendon loading and pain, knee-strengthening exercises, and a gradual return to sport. The primary outcome was the global reporting of change at 12 weeks, evaluated with a 7-point Likert scale (successful outcome was considered “much improved” or “improved”). Additional endpoints were at 4, 8, 26, and 52 weeks. Secondary outcomes included the Knee injury and Osteoarthritis Outcome Score (KOOS), objective strength, and jump performance.

Results:

Adolescents reported a mean pain duration of 21 months at enrollment. After 12 weeks, 80% reported a successful outcome, which increased to 90% at 12 months. At 12 weeks, 16% returned to playing sport, which increased to 69% at 12 months. The KOOS subscores of Pain, Activities of Daily Living, Sport and Recreation, and Quality of Life improved significantly (7-20 points), and there were improvements in knee extension strength (32%; P < .001), hip abduction strength (24%; P < .001), and jumping for distance (14%; P < .001) and height (19%; P < .001) at 12 weeks.

Conclusion:

An intervention consisting of activity modification, pain monitoring, progressive strengthening, and a return-to-sport paradigm was associated with improved self-reported outcomes, hip and knee muscle strength, and jumping performance. This approach may offer an alternative to passive approaches such as rest or wait-and-see, often prescribed for adolescents with OSD.

Registration:

NCT02799394 (ClinicalTrials.gov identifier)

Similar functional outcome using single anterior portal and standard two portals technique in recurrent dislocation of shoulder

PURPOSE

Recurrent dislocation of shoulder (RDS) is a common injury in high demand professionals, like athletes and military personnel. The treatment for the patients with Bankart lesion is the arthroscopic repair. This present study compares the outcomes of two different techniques of arthroscopic Bankart repair i.e. a standard two anterior portals technique and a single anterior portal technique in patients with RDS.

METHODS

Patients with traumatic RDS met the inclusion criteria were managed with Bankart repair using either two anterior portals (Group A) or a single anterior portal (Group B) technique. Patients were evaluated before the intervention and at the mean follow-up of approximately two years using Rowe score, Oxford shoulder score and Tegner activity scale.

RESULTS

The mean age of the patients in Groups A (n = 34) and B (n = 37) was 29.64 years and 29.05 years respectively (p = 0.66). The dominant shoulder was involved in 27 patients in Group A and 22 patients in Group B (p = 0.069). The operative time in Group A and B was 68.52 min and 46.35 min, respectively (p < 0.001). The complications at follow-up, the mean Rowe score and Oxford score improved significantly in both groups compared with the pre-operative values. However, the final outcome scores were not significantly different between the both groups. The median Tegner's score preoperatively and at follow-up was 7 and 6, respectively in Groups A and B.

CONCLUSIONS

Single anterior portal technique is an effective treatment modality, yielding a similar outcome as two anterior portals technique in the management of RDS.

Osgood-Schlatter Lesion Removed Arthroscopically in an Adult Patient

Osgood-Schlatter disease is a traction apophysitis of the tibial insertion of the patellar tendon. It consists one of the most common causes of knee pain in adolescents and usually presents in young males and it is considered a self-limiting condition. Although the symptoms disappear after the closure of the growth plate in most cases, in some patients they may persist. A variety of conservative treatments are used in most cases, however surgical intervention can be successful for patients who have intolerable symptoms. Most surgical options of the Osgood-Schlatter disease include open procedures, while arthroscopic or direct bursoscopic excision has been reported. We believe that the arthroscopic removal of an unresolved Osgood-Schlatter might be the most appropriate treatment for this condition, and we present a case of a male patient with an ununited ossicle due to an Osgood-Schlatter lesion, which was removed arthroscopically using a multidirectional arthroscope and a motorized semi-hooded barrel burr.

Pain, Sports Participation, and Physical Function in Adolescents With Patellofemoral Pain and Osgood-Schlatter Disease: A Matched Cross-sectional Study

OBJECTIVE

To compare pain, physical activity, quality of life, strength, and knee function in adolescents with patellofemoral pain (PFP) and Osgood-Schlatter disease (OSD) to those in pain-free controls.

DESIGN

Cross-sectional study.

METHODS

Self-report questionnaires were used to describe pain, physical activity, knee function, and quality of life in participants with PFP (n = 151) or OSD (n = 51) and in pain-free controls (n = 50) between 10 and 14 years of age. Hip and knee strength were measured by handheld dynamometry. Physical activity levels were measured using wearable accelerometers.

RESULTS

Adolescents were highly active (accumulating greater than 120 minutes of vigorous physical activity per day), with no differences between the OSD, PFP, and control groups. Adolescents with PFP or OSD scored 22 to 56 points lower (P<.001) on the Knee injury and Osteoarthritis Outcome Score subscales compared with controls, with the lowest scores on the "sport and recreation" and "quality of life" subscales. Adolescents with OSD had lower knee extension strength compared to controls (P<.05; effect size, 1.25). Adolescents with PFP had lower hip extension strength compared to controls (P<.05; effect size, 0.73).

CONCLUSION

Adolescents with PFP or OSD had high physical activity levels, despite reporting long-standing knee pain and impaired knee function that impacted on their sports participation and quality of life. Clinicians treating adolescents with PFP or OSD may use these findings to target treatment to the most common deficits to restore sports-related function and sports participation. J Orthop Sports Phys Ther 2020;50(3):149-157. Epub 6 Jan 2020. doi:10.2519/jospt.2020.8770.

TREATMENT OF MIDSHAFT CLAVICLE FRACTURE WITH SUPERIOR PLATE PLACEMENT

Objective:

To evaluate the late clinical and radiological results of patients had locking plate anatomically compatible from superior surface and muscle cover on plate due to clavicle mid-region.

Materials and Methods:

Forty patients were included retrospectively. Patients had a routine right shoulder anterior posterior graph after examination. The results were assessed by returning to the patient's daily activities, Constant score, the Disability of the Arm, and Shoulder and Hand scoring, followed by radiological and clinical examination.

Results:

Fourteen (35%) patients were female and 26 (65%) were male. The mean age was 36.2 years. Twenty-six patients had right clavicle fracture and 14 patients had left. Twenty-three fractures were type 2B1 and 17 fractures were type 2B2. Mean follow-up time was 36.4 months. Radiologic union was at a mean of 9.1 ± 1.3 weeks. All patients had excellent results. The mean Constant score was 97.2 ± 1.8, the mean Disability of the Arm, and Shoulder and Hand score was 3.8 ± 2.4.

Conclusion:

It is possible to obtain complete union with high patient satisfaction by avoiding the complications and difficulties of the conservative treatment with the use of the anatomically compatible locking plates in superior fixation and our surgical dissection. Level of Evidence III, Retrospective Case controlled study.

Long-Term Outcomes of Arm Replantation

BACKGROUND

Advances in microsurgery have improved the survival rate of arm replantation. However, the functional outcome of the replanted arms remains unpredictable. The authors performed a systematic review to evaluate the long-term outcome of arm replantation and the secondary reconstructive procedures after replantation.

METHODS

All available English literature in the PubMed, Embase, and CENTRAL databases was searched for articles reporting functional outcome of successful arm replantation with follow-up period more than 1 yr. Clinical data were extracted including study characteristics, patient demographic information, functional outcome, and the numbers, types, and timing of secondary surgery. Among these, factors identified to influence overall outcome were reviewed and analyzed.

RESULTS

Twenty-nine studies representing 79 arm replantations met the inclusion criteria. A total of 111 secondary procedures were recorded in 23 studies. The average number of secondary surgical procedures was 2.6 per patient. The most common procedures were nerve repair (23.4%), followed by functioning muscle transfer (19.8%), tendon transfer (17.1%), wound coverage (11.7%), contracture release (10.8%), bone repair (9.9%), arthrodesis (5.4%), and others (1.8%). Procedures involving wound coverage and nerve repair were mainly conducted in the early stage within 4 mos after replantation, whereas functioning muscle transfer, tendon transfer, and arthrodesis were mostly performed after 1 yr postoperatively. The satisfied (Chen I and II) functional outcome was achieved in 49.4% patients. The level of amputation and the type of injury have significant impact on final outcomes, whereas patients' age and timing of nerve repair do not. Patients with amputation at the distal third of the arms had a better outcome than those at the proximal and middle third of the arms (P < 0.05), and patients injured by sharp-cut recovered better than those by crush and avulsion (P < 0.05).

CONCLUSIONS

Optimal outcomes could be achieved in nearly half of patients with arm replantation, although multiple secondary surgical interventions and long periods of recovery are often required.

The Pediatric Knee and Proximal Tibia

Pediatric knee disorders are various and range from trauma and sports injuries to chronic overuse injuries. Because pediatric patients are different from adults, management of pediatric injuries and general knee disorders is also often different. Primary treatment regimen goals focus on a return to the previous level of function, preservation of anatomy, and decreasing potential long-term effects. Long-term complications may include damage to the physis with resultant potential limb length discrepancy or deformity.

Osgood-Schlatter disease: a 2020 update of a common knee condition in children

PURPOSE OF REVIEW

Osgood-Schlatter disease (OSD) is one of the most common causes for anterior knee pain in children and adolescents resulting from a traction apophysitis of the tibial tubercle. While a peak in boys aged 12-15 years old was well documented, there seems to be no difference in sex distribution nowadays. This may result from increased participation of young females in high-impact sports. This review provides an up-to-date account on contemporary prophylaxis as well as diagnostic and therapeutic approaches.

RECENT FINDINGS

Numerous studies have examined risk factors for OSD. These include body weight, muscle tightness, muscle weakness during knee extension and flexibility of hamstring muscles. In particular, shortening of the rectus femoris may substantially alter biomechanical functions of the knee. Conservative management remains successful in over 90% of patients. However, if disabling symptoms and pain persistent after physeal closure, operative treatment may be necessary.

SUMMARY

OSD is a mostly self-limiting apophysitis of the tibial tubercle and the adjacent patella tendon in young active patients with open physis. Prevention strategies include quadriceps and hamstring stretching and therefore should be implemented in everyday practice routines for children who partake in regular sports activities.

No superiority of dextrose injections over placebo injections for Osgood-Schlatter disease: a prospective randomized double-blind study

PURPOSE

Osgood-Schlatter disease (OSD) is a traction apophysitis of the tibial tuberosity. Patellar tendinopathy and deep infrapatellar bursitis have recently been shown to contribute to pain in patients with OSD. We compared the effects of dextrose injection and saline injection.

METHODS

We performed a clinical trial from April 2012 to January 2016 and included 49 knees from 37 boys and 1 girl (mean age, 12.3 ± 1.1 years) for whom conventional conservative therapy for > 1 month was ineffective. They were randomly assigned to receive double-blind injections of 1% lidocaine (1 mL) with 20% dextrose (1 mL; dextrose group) or 1% lidocaine (1 mL) with saline (1 mL; saline group). Injections were administered monthly for 3 months by a single investigator. The Victorian Institute of Sport Assessment (VISA) score was used to evaluate anterior knee pain.

RESULTS

Overall, 43 knees were included; 6 knees were lost to follow-up. The mean pre-injection VISA scores in the dextrose and saline groups were 58.7 ± 18.3 and 63.4 ± 16.4, respectively. No significant differences were found between the two groups at any time point. The mean VISA score before injections significantly increased at the 1-month follow-up in both groups (P < .01). The injection had no adverse effects.

CONCLUSIONS

We were not able to show the efficacy of dextrose injections compared to that of saline.

LEVEL OF EVIDENCE

Randomized controlled trial. Level I.

Does tourniquet use decrease blood loss following primary total knee arthroplasty in Jehovah's Witness patients?

OBJECTIVES

This study aims to investigate the use of multiple blood management strategies and the effect of tourniquet on the estimated blood loss (EBL) in Jehovah's Witness (JW) patients who underwent primary total knee arthroplasty (TKA).

PATIENTS AND METHODS

Twenty-two self-reported JW patients (9 males, 13 females; mean age 66.8±8.6 years; range, 51 to 83 years) who underwent primary TKA between January 2014 and January 2020 in our institution were retrospectively reviewed. A standard blood management protocol that consisted of hypotensive anesthesia, local and systemic administration of tranexamic acid (TXA) and intraoperative cell salvage was applied to all patients. Patients were divided into two groups: with (n=11) and without (n=11) tourniquet use. The EBL was calculated according to Meunier's formula. Hemoglobin (Hgb), hematocrit (Hct), and EBL on the first and third postoperative days were compared statistically.

RESULTS

There was no significant difference between groups regarding postoperative Hgb (p=0.801 and p=0.767), Hct (p=0.617 and p=0.895), Hgb decline (p=0.311 and p=0.822), and EBL (p=0.067 and p=0.284) at first and third postoperative days. None of the patients required blood transfusion. No wound complication or symptomatic deep vein thrombosis was seen during the hospital stay.

CONCLUSION

Combined use of hypotensive anesthesia, intravenous administration of TXA, intraoperative periarticular injection, and cell salvage seem to be sufficient in controlling the blood loss in JW patients during TKA. Additional tourniquet use may not further decrease the EBL.

High-pressure injection injury: a case report and systematic review

High-pressure delivery devices for paint and other substances can lead to severe injuries of the hand without immediate surgical debridement. We present a case of a high-pressure paint gun injury treated surgically with full resolution of function. A systematic review of the literature details outcomes of similar injuries.

Reliability of Magnetic Resonance Imaging Prediction of Anterior Cruciate Ligament Autograft Size and Comparison of Radiologist and Orthopaedic Surgeon Predictions

Background:

In anterior cruciate ligament (ACL) reconstruction, hamstring tendon autografts <8 mm have been associated with increased failure rates. There has been no established modality by which orthopaedic surgeons can preoperatively predict graft sizes.

Purpose/Hypothesis:

The purposes of this study were to (1) determine whether routine magnetic resonance imaging (MRI) measurement of hamstring tendon cross-sectional area (CSA) can reliably be used by sports medicine fellowship–trained orthopaedic surgeons to predict graft size and (2) determine whether radiologists and sports medicine surgeons are able to discriminate grafts below a predetermined cutoff value. We hypothesized that radiologists will find a correlation between MRI measurement and intraoperative graft size. Similarly, orthopaedic surgeons will be able to correctly estimate the graft size based on MRI measurement.

Study Design:

Cohort study (diagnosis); Level of evidence, 2.

Methods:

Included in this study were 30 consecutive patients (15 women and 15 men) (mean age, 23 years [range, 13-43 years]) for whom MRI-determined hamstring tendon CSA and graft size measurements could be compared. Patients were included if they had a preoperative MRI demonstrating acute ACL rupture and were scheduled with 1 of 3 surgeons for a reconstruction performed using the ST and GR tendons. Operative data were collected over 1 year. Sectra imaging software was used to measure the CSA of the semitendinosus (ST) and gracilis (GR) tendons on the preoperative MRIs. Control measurements were performed intraoperatively using a graft sizing block with 0.5-mm increments. Simple linear regression analysis was used to evaluate the ability of MRI measurements to predict autograft size. Logistic regression was used to determine the minimum CSA for a graft of 8 mm. The intraclass correlation coefficient (ICC) was used to evaluate interrater reliability.

Results:

MRI CSA measurement of the average STGR (ST CSA added to the GR CSA) was a significant predictor of graft size (adjusted R² = 0.186; P < .001). The 3 measurements with the strongest correlations with graft size were the ST at the medial femoral condyle (MFC), the STGR at the MFC, and the average STGR. The minimum CSA for the average STGR on MRI to achieve a graft size of 8 mm was 17.168 mm² (P < .001). The area under the receiver operating characteristic curve was 0.765. The overall ICC was 0.977.

Conclusion:

Routine preoperative MRI can be used by both radiologists and orthopaedic surgeons to predict the expected ACL autograft size and identify those below a cutoff of 8 mm. This will help in preoperative planning and graft selection.

Engineered 3D Polymer and Hydrogel Microenvironments for Cell Culture Applications

The realization of biomimetic microenvironments for cell biology applications such as organ-on-chip, in vitro drug screening, and tissue engineering is one of the most fascinating research areas in the field of bioengineering. The continuous evolution of additive manufacturing techniques provides the tools to engineer these architectures at different scales. Moreover, it is now possible to tailor their biomechanical and topological properties while taking inspiration from the characteristics of the extracellular matrix, the three-dimensional scaffold in which cells proliferate, migrate, and differentiate. In such context, there is therefore a continuous quest for synthetic and nature-derived composite materials that must hold biocompatible, biodegradable, bioactive features and also be compatible with the envisioned fabrication strategy. The structure of the current review is intended to provide to both micro-engineers and cell biologists a comparative overview of the characteristics, advantages, and drawbacks of the major 3D printing techniques, the most promising biomaterials candidates, and the trade-offs that must be considered in order to replicate the properties of natural microenvironments.

Prediction of Autograft Hamstring Size for Anterior Cruciate Ligament Reconstruction Using MRI

BACKGROUND

Hamstring autografts with a diameter of less than 8 mm for ACL reconstruction have an increased risk of failure, but there is no consensus regarding the best method to predict autograft size in ACL reconstruction.

QUESTIONS/PURPOSES

(1) What is the relationship between hamstring cross-section on preoperative MRI and intraoperative autograft size? (2) What is the minimum hamstring tendon cross-sectional area on MRI needed to produce an autograft of at least 8 mm at its thickest point?

METHODS

This was a retrospective cohort study of 68 patients. We collectively reviewed patients who underwent ACL reconstruction by three separate fellowship-trained surgeons at the Carilion Clinic between April 2010 and July 2013. We searched the patient records database of each surgeon using the keyword "ACL". A total of 293 ACL reconstructions were performed during that time period. Of those, 23% (68 patients) had their preoperative MRI (1.5 T or 3 T magnet) performed at the Carilion Clinic with MRI confirmation of acute total ACL rupture. Exclusion criteria included previous ACL reconstructions, multiligamentous injuries, and history of acute hamstring injuries.After applying the exclusion criteria, there were 29 patients in the 1.5 T magnet group and 39 in the 3 T group. Median age (range) was 29 years (12 to 50) for the 1.5 T group and 19 years (9 to 43) for the 3 T group. The patients were 41% female in the 1.5 T group and 23% female in the 3 T group. Use of 1.5 T or 3 T magnets was based on clinical availability and scheduling. The graft's preoperative cross-sectional area was compared with the intraoperative graft's diameter. The MRI measurements were performed by a single musculoskeletal radiologist at the widest point of the medial femoral condyle and at the joint line. Intraoperative measurements were performed by recording the smallest hole the graft could fit through at its widest point. Pearson's correlation coefficients were calculated to determine the relationship between graft size and tendon cross-sectional area. A simple logistic regression analysis was used to calculate the cutoff cross-sectional areas needed for a graft measuring at least 8 mm at its thickest point. Intrarater reliability was evaluated based on re-measurement of 19 tendons, which produced an overall intraclass correlation coefficient (ICC) of 0.96 95% (CI 0.93 to 0.98). A p value < 0.05 was considered significant.

RESULTS

In general, the correlation between MRI-measured hamstring thickness and hamstring graft thickness as measured in the operating room were good but not excellent. The three measurements that demonstrated the strongest correlation with graft size in the 1.5 T group were the semitendinosus at the medial femoral condyle (r = 0.69; p < 0.001), the semitendinosus and gracilis at the medial femoral condyle (r = 0.70; p < 0.001), and the mean semitendinosus and gracilis (r = 0.64; p < 0.001). These three measurements had correlation values of 0.53, 0.56, and 0.56, respectively, in the 3 T MRI group (all p values < 0.001). To create an 8-mm hamstring autograft, the mean semitendinosus plus gracilis cutoff values areas were 18.8 mm and 17.5 mm for the 1.5 T and 3.0 T MRI groups, respectively.

CONCLUSIONS

Imaging performed according to routine knee injury protocol can be used to preoperatively predict the size of hamstring autografts for ACL reconstructions. In clinical practice, this can assist orthopaedic surgeons in graft selection and surgical planning.

LEVEL OF EVIDENCE

Level II, diagnostic study.

Bioresorbable Stent in Anterior Cruciate Ligament Reconstruction

The exact causes of failure of anterior cruciate ligament (ACL) reconstruction are still unknown. A key to successful ACL reconstruction is the prevention of bone tunnel enlargement (BTE). In this study, a new strategy to improve the outcome of ACL reconstruction was analyzed using a bioresorbable polylactide (PLA) stent as a catalyst for the healing process. The study included 24 sheep with 12 months of age. The animals were randomized to the PLA group (n = 16) and control group (n = 8), subjected to the ACL reconstruction with and without the implantation of the PLA tube, respectively. The sheep were sacrificed 6 or 12 weeks post-procedure, and their knee joints were evaluated by X-ray microcomputed tomography with a 50 μm resolution. While the analysis of tibial and femoral tunnel diameters and volumes demonstrated the presence of BTE in both groups, the enlargement was less evident in the PLA group. Also, the microstructural parameters of the bone adjacent to the tunnels tended to be better in the PLA group. This suggested that the implantation of a bioresorbable PLA tube might facilitate osteointegration of the tendon graft after the ACL reconstruction. The beneficial effects of the stent were likely associated with osteogenic and osteoconductive properties of polylactide.

Antibacterial PMMA Composite Cements with Tunable Thermal and Mechanical Properties

PMMA-based cements are the most used bone cements in vertebroplasty and total hip arthroplasty. However, they present several drawbacks, including susceptibility to bacterial infection, monomer leakage toxicity, and high polymerization temperature, which can all lead to damage to the surrounding tissues and their failure. In the present study, silver nanowires (AgNWs) have been introduced to bestow antibacterial properties; chitosan (CS) to promote porosity and to reduce the polymerization temperature, without negatively affecting the mechanical performance; and methacryloyl chitosan (CSMCC) to promote cross-linking with methyl methacrylate (MMA) and reduce the quantity of monomer required for polymerization. Novel PMMA cements were formulated containing AgNWs (0 and 1% w/w) and CS or CSMCC at various concentrations (0, 10, 20, and 30% w/w), testing two different ratios of powder and MMA (P/L). Mechanical, thermal, antibacterial, and cytotoxic properties of the resulting composite cements were tested. Cements with concentrations of CS > 10% presented a significantly reduced polymerization temperature. The mechanical performances were affected for concentrations > 20% with a P/L concentration equal to 2:1. Concentrations of AgNWs as low as 1% w/w conferred antimicrobial activity against S. aureus, whereas biofilm formation on the surface of the cements was increased when CS was included in the preparation. The combination of CS and AgNWs allowed a higher concentration of Ag⁺ to be released over time with enhanced antimicrobial activity. Inclusion of AgNWs did not affect cell viability on the scaffolds. In conclusion, a combination of CS and AgNWs may be beneficial for reducing both polymerization temperature and biofilm formation, without significantly affecting mesenchymal stem cell proliferation on the scaffolds. No advantages have been noticed as a result of the reducing P/L ratio or using CSMCC instead of CS.

Surgical management of type II superior labrum anterior posterior (SLAP) lesions: a review of outcomes and prognostic indicators

A Type II SLAP (superior labrum anterior posterior) lesion is a tear of the superior glenoid labrum with involvement of the long head of the biceps tendon insertion. In patients that do not improve with conservative treatment, there is a great deal of variability in the surgical management of these injuries that includes arthroscopic SLAP repair, arthroscopic SLAP repair with biceps tenodesis, biceps tenodesis alone and biceps tenotomy. Each surgical technique has specific effects on a patient's postoperative course and functional recovery. Rehabilitation strategies may be best formulated on an individual basis with an open line of communication between the operating surgeon and the physical therapist. Despite an increased incidence in treatment, there is currently no consensus on the optimal surgical procedure or treatment algorithm for Type II SLAP injuries. However, in middle-aged or older patients (>35) with Type II SLAP tears, either arthroscopic suprapectoral or mini-open subpectoral biceps tenodesis is recommended due to the higher failure rates observed with arthroscopic SLAP repair in this patient group. Although more patients present with a 'Popeye' sign after biceps tenotomy, long-term functional outcome is similar between biceps tenodesis compared to tenotomy. However, more patients will experience biceps fatigue or cramping after the tenotomy procedure. Biceps tenodesis is preferred in younger, more active patients, while tenotomy is preferred in the middle-aged or older and lower demand patients. The aim of this paper is to provide a brief description of the different surgical techniques employed to address Type II SLAP lesions (arthroscopic repair, biceps tenodesis, and biceps tenotomy) and provide a review of available literature regarding outcomes and prognostic factors associated with each technique.

The medial epicondyle of the distal femur is the optimal location for MRI measurement of semitendinosus and gracilis tendon cross-sectional area

PURPOSE

Graft diameter ≥ 8 mm reduces the risk of failure after anterior cruciate ligament reconstruction (ALCR) with hamstring tendon autograft. Pre-operative measurement of gracilis (GT) and semitendinosus (ST) cross-sectional area using MRI has been utilized but the optimal location for measurement is unknown. The main purpose of this study was to examine the cross-sectional areas of GT + ST at different locations and develop a model to predict whether a doubled hamstring graft of GT + ST will be of sufficient cross-sectional area for ACLR.

METHODS

A retrospective review was performed of 154 patients who underwent primary ACLR using doubled hamstring autograft. Cross-sectional area measurements of GT + ST on pre-operative MRI axial images were made at three locations: medial epicondyle (ME), tibiofemoral joint line (TJL), and tibial physeal scar (TPS) and calculated the correlation of intra-operative graft size for each location using the Pearson's correlation coefficient. A receiver operating characteristic (ROC) established a threshold that would predict graft diameter ≥ 8 mm.

RESULTS

Measurement of GT + ST at the ME had a stronger correlation (r = 0.389) to intra-operative graft diameter than measurements at the TJL (r = 0.256) or TPS (r = 0.240). The ROC indicated good predictive value for hamstring graft diameter ≥ 8 mm based on MRI measurement at the ME with the optimal threshold with the highest sensitivity and specificity as 18 mm².

CONCLUSION

Cross-sectional area measurement of GT + ST at the ME correlated most closely to intra-operative diameter of a doubled hamstring autograft compared to measurements at the TJL or the TPS. As graft diameter < 8 mm is correlated with higher failure rates of ACL surgery, the ability to pre-operatively predict graft diameter is clinically useful.

LEVEL OF EVIDENCE

Level III, prognostic study.

Long-term Prognosis and Impact of Osgood-Schlatter Disease 4 Years After Diagnosis: A Retrospective Study

Background:

Knee pain is common during adolescence, with Osgood-Schlatter disease (OSD) being the most frequent condition. Despite this, research regarding the long-term prognosis of OSD is limited.

Purpose:

To evaluate the prognosis 2 to 6 years after the diagnosis of OSD.

Study Design:

Cohort study; Level of evidence, 3.

Methods:

This retrospective cohort study included patients diagnosed with OSD at a single orthopaedic department between 2010 and 2016. Patients were contacted in 2018 and asked to complete a self-reported questionnaire regarding knee pain, knee function (Knee injury and Osteoarthritis Outcome Score [KOOS] Sports/Recreation subscale), Health-related quality of life (HRQoL) (youth version of EuroQol 5 dimensions 3 levels [EQ-5D-3L-Y]), and physical activity.

Results:

Out of 84 patients, 43 responded. Of these, 60.5% (n = 26) reported OSD-related knee pain at follow-up (median follow-up, 3.75 years). The median symptom duration was 90 months (interquartile range, 24-150 months) for those still experiencing knee pain, and 42.9% of these reported daily knee pain. Fifty-four percent with knee pain had reduced their sports participation compared with 35.3% of those without knee pain. KOOS Sports/Recreation subscale scores were significantly lower in those with knee pain compared with those without knee pain (53 [95% CI, 42-63] vs 85 [95% CI, 76-94], respectively). Participants with knee pain reported lower HRQoL (0.71 [95% CI, 0.57-0.84]) compared with those without knee pain (0.99 [95% CI, 0.97-1.00]).

Conclusion:

This study indicates that OSD may not always be self-limiting. The lower self-reported function and HRQoL in those with continued pain may be a consequence of impaired physical activity due to knee pain.

High-pressure injection injuries of the fingers: Long-term follow-up in patients after extensive debridement

High-pressure injection injuries to the fingers resulting from the introduction of a foreign substance, such as oil or paint, through a minor puncture wound are rare but can have serious clinical consequences. The objective of this article was to examine the long-term outcomes after surgical debridement of these injuries. We present a retrospective case series of 8 adults who had a high-pressure injection injury to their hand and underwent surgical debridement in our facility. Data were extracted from our outpatient registry. Assessment included a full physical examination, grip strength, range of motion, two-point discrimination and Quick Disability of the Arm, Shoulder, and Hand (QuickDASH) questionnaire. We followed 8 male patients for an average of 12.7 years. Their average age was 37 at time of injury and all had injured their right dominant hand. Seventy-five percent of the injuries were to the index finger. Seven out of the 8 patients returned to their pre-injury occupation, 4 out of 8 patients had reduced range of motion of the affected digit. Injury sequelae adversely affected activities of daily living (ADL) with an average QuickDASH score of 26. Grip strength in the injured hand was reduced by an average of 35% in 6 out of 8 patients compared with the uninjured hand. Sensation was also reduced in the affected digit in 7 out of 8 patients. All patients suffered from some level of neuropathic pain and/or cold intolerance. High pressure injection injury to the fingers is a serious event found amongst industrial laborers. In most patients, this injury will lead to long-term disability along with a negative impact on ADL. However, most patients eventually return to their pre-injury occupation. Extensive, single or repeat debridement of high-pressure injection injuries remains a valid treatment option with good long-term results.

3D and 4D Printing of Polymers for Tissue Engineering Applications

Three-dimensional (3D) and Four-dimensional (4D) printing emerged as the next generation of fabrication techniques, spanning across various research areas, such as engineering, chemistry, biology, computer science, and materials science. Three-dimensional printing enables the fabrication of complex forms with high precision, through a layer-by-layer addition of different materials. Use of intelligent materials which change shape or color, produce an electrical current, become bioactive, or perform an intended function in response to an external stimulus, paves the way for the production of dynamic 3D structures, which is now called 4D printing. 3D and 4D printing techniques have great potential in the production of scaffolds to be applied in tissue engineering, especially in constructing patient specific scaffolds. Furthermore, physical and chemical guidance cues can be printed with these methods to improve the extent and rate of targeted tissue regeneration. This review presents a comprehensive survey of 3D and 4D printing methods, and the advantage of their use in tissue regeneration over other scaffold production approaches.

Silica nanoparticle surface chemistry: An important trait affecting cellular biocompatibility in two and three dimensional culture systems

Great advantages bestowed by mesoporous silica nanoparticles (MSNs) including high surface area, tailorable pore diameter and surface chemistry, and large pore volume render them as efficient tools in biomedical applications. Herein, MSNs with different surface chemistries were synthesized and investigated in terms of biocompatibility and their impact on the morphology of bone marrow-derived mesenchymal stem cells both in 2D and 3D culture systems. Bare MSNs (BMSNs) were synthesized by template removing method using tetraethylorthosilicate (TEOS) as a precursor. The as-prepared BMSNs were then used to prepare amine-functionalized (AMSNs), carboxyl-functionalized (CMSNs) and polymeric amine-functionalized (PMSNs) samples, consecutively. These nanoparticles were characterized by scanning electron microscopy, zeta potential measurement, dynamic light scattering, BET (Brunauer, Emmett, Teller) analysis, and FTIR technique. In a 3D culture system, stem cells were encapsulated in alginate hydrogel in which MSNs of different functionalities were incorporated. The results showed good biocompatibility for both BMSNs and AMSNs in 2D and 3D culture systems. For these samples, the viability of about 80% was acquired after 2 weeks of 3D culture. When compared to the control, CMSNs caused higher cell proliferation in the 2D culture; while they showed cytotoxic effects in the 3D culture system. Interestingly, polymeric amine-functionalized silica nanoparticles (PMSNs) resulted in disrupted morphology and very low viability in the 2D cell culture and even less viability in 3D environment in comparison to BMSNs and AMSNs. This significant decrease in cell viability was attributed to the higher uptake values of highly positively charged PMSNs by cells as compared to other MSNs. This up-regulated uptake was evaluated by using an inductively coupled plasma optical emission spectroscopy instrument (ICP-OES). These results uncover different interactions between cell and nanoparticles with various surface chemistries. Building on these results, new windows are opened for employing biocompatible nanoparticles such as BMSNs and AMSNs, even at high concentrations, as potential cargos for carrying required growth and/or differentiation factors for tissue engineering applications.

Prospective study on effectiveness and safety of arthroscopic Bankart using a single anterior portal for patients with anterior shoulder instability

OBJECTIVE

To evaluate the effectiveness and safety of the arthroscopic Bankart repair technique using a single anterior portal in patients with anterior shoulder instability.

PATIENTS AND METHODS

Prospective study of 82 patients who underwent arthroscopic Bankart repair using a single anterior portal. Comparison with a historical series of 69 patients treated with two anterior portals. The patients were evaluated by the Rowe scale, and DASH (Disability of the Arm, Shoulder and Hand) and OIS (Oxford Instability Shoulder) questionnaires, range of motion and visual analogue scales for pain and patient satisfaction.

RESULTS

After a mean follow-up of 36 months, there were no significant differences between groups regarding clinical or functional scores, quality of life or patient satisfaction. Surgical time was significantly shorter in the 1-portal group. In group 1-portal there were 2 patients with neurapraxias and 2 re-dislocations, while in group 2-portals were 1 and 2, respectively. The worst functional results were associated with the presence of a type III SLAP lesion.

CONCLUSIONS

Both techniques were satisfactory regarding functional outcomes and complications, except for type III SLAP lesions. Using only one anterior portal, the surgical time was shorter, and the costs were lower when dispensing with a second cannula and a suture passing instrument.

Time to Return to School After 10 Common Orthopaedic Surgeries Among Children and Adolescents

BACKGROUND

Return to school among adolescents is often overlooked in orthopaedic outcome studies. The purpose was to measure the time missed from school after 10 common orthopedic surgeries.

METHODS

Patients, 5 to 19 years old enrolled in elementary, middle, or high school, who underwent treatment for fixation of type III supracondylar humerus fracture, midshaft femur fracture fixation, isolated anterior cruciate ligament reconstruction, isolated partial menisectomy, adolescent idiopathic scoliosis fusion, closed reduction of both-bone forearm fracture, arthroscopic Bankart repair, hip arthroscopy with femoroacetabular impingement correction, limb length discrepancy correction, or surgical fixation of slipped capital femoral epiphysis during the 2014/2015 and 2015/2016 school years were identified for this Institutional Review Board-approved study. All patients were contacted after surgery to determine date of return to school, number of days in session, and number of school days missed.

RESULTS

Two hundred six patients met the inclusion criteria for this study. Mean age at time of surgery was 13.0±3.8 years. There were 105 males (51%). Mean time to return to school overall was 13.0±15.2 days. Very few students (n=9; 4%) did not miss any school days during recovery from the procedure of interest. The average number of days missed from school for males was 6.6 days compared with 8.4 days in females (P=0.20). There was no difference between patients aged 5 to 12 years compared with those aged 13 to 19 years (7.1 vs. 7.7 d, respectively; P=0.69). On average, patients who underwent closed reduction of a both-bone forearm fracture returned to school the quickest following surgery (3.4±1.2 d) and missed the least amount of in-session school days (1.9±0.9 d), and those who underwent adolescent idiopathic scoliosis fusion were out of school the longest (42.3±21.4 d) and missed the greatest number of in-session school days (27.6±14.7 d).

CONCLUSIONS

Information regarding average time missed from school for 10 common orthopaedic surgeries can be used by clinicians to counsel patients and their families regarding expected recovery time.

LEVEL OF EVIDENCE

Level IV.

Can capsular plication compensate the lack of one suture anchor in an arthroscopic three suture anchor Bankart repair? A comparative study

Objective

The aim of this study was to compare the complication rates and clinical results of labral repair with two suture anchors and capsular plication, and labral repair with three suture anchor fixation in artroscopic Bankart surgery.

Methods

Sixty-nine patients (60 males, 9 females; mean age: 28.2 ± 7.8 years (range: 16–50)) who had undergone arthroscopic repair of a labral Bankart lesion were evaluated. Group A underwent an arthroscopic Bankart repair with three knotless suture anchors, while group B underwent a modified arthroscopic Bankart repair with two knotless suture anchors and an additional capsular plication procedure. The mean follow-up was 52.5 months. Constant Shoulder Score (CSS), Rowe Score (RS), modified UCLA Shoulder Score (mUSS) and range of motion (ROM) were used as outcome measures.

Results

In both groups, a significant improvement was detected in functional outcomes at postoperative last follow-up compared to the preoperative period. No statistically significant difference was found (p > 0.05) in clinical scores (CSS; Group A: 89.7, Group B: 80.2) (RS; Group A: 88.2, Group B: 80.2) (mUSS; Group A: 26.3, Group B: 25.7) external rotation loss (At neutral; Group A: 4.5°, Group B: 5.2°. At abduction; Group A: 4.3°, Group B: 5.7°) and recurrence rates (Group A: 13.3%, Group B: 20.8%). Although the difference was not statistically significant, the recurrence rate was higher in group B (20.8%), compared to group A (13.3%), despite the shorter average follow-up time of group B (p = 0.417).

Conclusions

Arthroscopic repair of labral Bankart lesions with both techniques showed good functional outcomes and stability at the latest follow-up. Higher recurrence rate despite the shorter average follow-up of group B suggests that two anchor usage might not be sufficient for Bankart repair in terms of better stability and less recurrence risk.

Level of evidence

Level III, Therapeutic Study.