Nitrogen-Doped sp2-Hybridized Carbon as a Superior Catalyst for Selective Oxidation

Aziridine-Functionalized Multiwalled Carbon Nanotubes: Robust and Versatile Catalysts for the Oxygen Reduction Reaction and Knoevenagel Condensation

This paper describes the exohedral N-decoration of multiwalled carbon nanotubes (MWCNTs) with NH-aziridine groups via [2 + 1] cycloaddition of a tert-butyl-oxycarbonyl nitrene followed by controlled thermal decomposition of the cyclization product. The chemical grafting with N-containing groups deeply modifies the properties of the starting MWCNTs, generating new surface microenvironments with specific base (Brønsted) and electronic properties. Both of these features translate into a highly versatile single-phase heterogeneous catalyst (MW@N^Az) with remarkable chemical and electrochemical performance. Its surface base character promotes the Knoevenagel condensation with activity superior to that of related state of the art N-doped and N-decorated carbon nanomaterials; the N-induced electronic surface redistribution drives the generation of high-energy surface "C" sites suitable for O₂ activation and its subsequent electrochemical reduction (ORR).

Influence of cobalt species on the catalytic performance of Co-N-C/SiO2 for ethylbenzene oxidation

In this paper, cobaltporphyrin is used as a precursor to synthesize carbon nitrides with metal active sites supported on silica spheres by heat treatment (i.e. M-N-C/SiO2). The catalytic performance of M-N-C/SiO2 for ethylbenzene oxidation has been investigated and techniques such as N2 adsorption/desorption isotherm, NH3-TPD, HRTEM, STEM mapping and X-ray photoelectron spectroscopy (XPS) are employed to explore the active sites for ethylbenzene oxidation. XPS results show that cobalt compounds, such as CoOx and metallic Co, as well as cobalt nitrides, such as Co-Nx, are formed after the pyrolysis of cobaltporphyrin. However, according to the NH3-TPD experiment, Co-Nx may be the primary active site. When Co-Nx is poisoned by KSCN, the significant loss of catalytic activity further proves and verifies that Co-Nx instead of CoOx is the primary active site of M-N-C/SiO2 for ethylbenzene oxidation.

The influence of carbon surface chemistry on supported palladium nanoparticles in heterogeneous reactions

The surface chemistry of nanocarbon support can tailor chemical properties of precious metal nanoparticle/nanocarbon hybrid catalyst in heterogeneous reactions. We report on modified reduced graphene oxide (rGO) support with ionic liquid-derived carbonaceous surface for palladium nanoparticle (Pd NPs) decoration and their actions in different heterogeneous reactions. The surface chemistry of support materials was characterized in detail, and the influence of which on the formation and distribution of metal particles was further investigated. Three different types of reactions including Suzuki-Miyaura coupling reaction, CO oxidation and phenol reduction were examined in terms of reactivity and selectivity. The roles of substituted nitrogen in graphitic lattice and grafted groups on the carbon surface were exploited. Nitrogen-doping can give rise to changes in electronic properties of supported metals, and the Lewis basicity of the doped nitrogen atoms can favor the adsorption of acidic reactants in phenol reduction. The grafted groups derived a negative impact to the Suzuki-Miyaura coupling reaction, due to the involvement of larger reactant molecules, despite that they could prevent significant sintering of Pd NPs in the CO oxidation.

Hydrothermally functionalized biocompatible nitrogen doped graphene nanosheet based biomimetic platforms for nitric oxide detection

Hydrothermal synthesis of nanocomposites is of significant importance, as it affords facile, biocompatible, nontoxic, and economic fabrication. Herein, we report a hitherto unexplored cytocompatible and reusable biomimetic electrochemical sensor based on pyridyl porphyrin functionalized nitrogen doped graphene nanosheets. The porphyrin functionalized nitrogen doped graphene nanosheets (PFNGS) were prepared by a low temperature hydrothermal method via non-covalent strategies with a minimal impact on their physicochemical properties. Owing to their exceptional attributes like operational ease, low cost, portability, and sensitivity, the as-synthesized PFNGS, formed by π-π interactions, were employed for sensing nitric oxide (NO), which is a key regulator of diverse biological processes. Compared to porphyrin and nitrogen doped graphene nanosheets alone, PFNGS exhibited exceptional sensitivity (3.6191 μA μM^-1) and remarkable electrocatalytic properties (0.61 V). This clearly outperforms the previously reported modified electrode materials for the electrochemical detection of NO. Cyclic voltammetry (CV) data also suggested that the PFNGS modified electrode possessed an increased reactive surface area, which results in an increase in the number of reactive sites and low charge transfer resistance. These results also demonstrated that the PFNGS modified electrode showed high stability and reproducibility, the limit of detection (LOD) (S/N = 3) of which was estimated to be 1 nM. Our PFNGS were found to be highly biocompatible and could also detect NO released from macrophage cells. This blend of biocompatibility, electrode stability, electrocatalytic activity along with enhanced sensitivity and selectivity makes PFNGS a powerful and reliable nanomaterial for various biomedical applications in complex biological systems.

Visible light mediated efficient oxidative benzylic sp(3) C-H to ketone derivatives obtained under mild conditions using O2

A photooxygenation of benzylic sp(3) C-H reaction has been demonstrated using O2 mediated by visible light. This protocol provides a simple and mild route to obtain ketones from benzylic sp(3) C-H bonds. Various benzylic sp(3) C-H bonds can be transformed into the desired ketone derivatives in moderate to good yields. The (18)O2 labelling experiments demonstrated that the oxygen introduced into ketone originated from dioxygen. A plausible mechanism has been proposed accordingly.

The Road to MOF-Related Functional Materials and Beyond: Desire, Design, Decoration, and Development

Metal-organic frameworks (MOFs), which are known as a class of porous coordination polymers, have proven to be of great significance to manifold applications, owing to their fascinating topology, ultrahigh porosity, enormous internal surface area, and the combination of being as rigid as inorganic materials and as flexible as organic materials . In this review, we give a concise history of the development of MOFs as functional materials prior to our entry into this area in 2006, then a summary of our road to participate in and extend the outline of the research in MOFs chemistry, as well as the challenge in further designing applicable functional materials. We describe not only the road of evolution from the past, present, and future of this chemistry, but also the road to finalize a functional material from the desire to the design, synthesis, and postmodification of a MOF. Throughout the review, we particularly emphasize the improvements in the application of MOFs as heterogeneous catalysts, such as employing MOFs as one component for the construction of composites, and their extended scope in tough catalytic reactions. Examples of applications in gas storage and separation, small molecular sensing, and our perspectives for future applications triggered by MOFs, are also introduced.

Catalysis with two-dimensional materials and their heterostructures

Graphene and other 2D atomic crystals are of considerable interest in catalysis because of their unique structural and electronic properties. Over the past decade, the materials have been used in a variety of reactions, including the oxygen reduction reaction, water splitting and CO2 activation, and have been shown to exhibit a range of catalytic mechanisms. Here, we review recent advances in the use of graphene and other 2D materials in catalytic applications, focusing in particular on the catalytic activity of heterogeneous systems such as van der Waals heterostructures (stacks of several 2D crystals). We discuss the advantages of these materials for catalysis and the different routes available to tune their electronic states and active sites. We also explore the future opportunities of these catalytic materials and the challenges they face in terms of both fundamental understanding and the development of industrial applications.

P-Doped Porous Carbon as Metal Free Catalysts for Selective Aerobic Oxidation with an Unexpected Mechanism

An extremely simple and rapid (seconds) approach is reported to directly synthesize gram quantities of P-doped graphitic porous carbon materials with controlled P bond configuration. For the first time, it is demonstrated that the P-doped carbon materials can be used as a selective metal free catalyst for aerobic oxidation reactions. The work function of P-doped carbon materials, its connectivity to the P bond configuration, and the correlation with its catalytic efficiency are studied and established. In direct contrast to N-doped graphene, the P-doped carbon materials with higher work function show high activity in catalytic aerobic oxidation. The selectivity trend for the electron donating and withdrawing properties of the functional groups attached to the aromatic ring of benzyl alcohols is also different from other metal free carbon based catalysts. A unique catalytic mechanism is demonstrated, which differs from both GO and N-doped graphene obtained by high temperature nitrification. The unique and unexpected catalytic pathway endows the P-doped materials with not only good catalytic efficiency but also recyclability. This, combined with a rapid, energy saving approach that permits fabrication on a large scale, suggests that the P-doped porous materials are promising materials for "green catalysis" due to their higher theoretical surface area, sustainability, environmental friendliness, and low cost.

Chemical functionalization of N-doped carbon nanotubes: a powerful approach to cast light on the electrochemical role of specific N-functionalities in the oxygen reduction reaction

Two different synthetic approaches to carbon nanotube N-decoration/doping are used to foster the hypothesis of a unique N-configuration (N-pyridinic) at work in the ORR.

Preparation of CoNC catalysts via heating a mixture of cobaltporphyrin and casein for ethylbenzene oxidation

Biomass-derived cobalt-coordinated N-doped carbon (CoNC) for C–H bond oxidation is synthesized by a facile procedure based on pyrolysis of cobaltporphyrin with natural, amino acid-rich biomass casein as a supplementary nitrogen source.

Boron and nitrogen co-doped carbon dots as a metal-free catalyst for hydrogen generation from sodium borohydride

The high catalytic activity of B,N co-doped CDs is due to the synergistic effect of nitrogen and boron dopants and the intrinsic properties of carbon dots.

Nitrogen-doped porous carbon materials: promising catalysts or catalyst supports for heterogeneous hydrogenation and oxidation

Developing novel and efficient catalysts is a critical step in common heterogeneous hydrogenation and oxidation reactions.

Nitrogen-doped graphene nanosheets as metal-free catalysts for dehydrogenation reaction of ethanol

N-Doped graphene is used to catalyze the dehydrogenation of ethanol, wherein acetaldehyde is obtained with a hundred percent selectivity.

Promotion mechanism of pyridine N-doped carbocatalyst for SO2 oxidation

Herein, we show the mechanism of SO₂ catalytic oxidation for saturated pyridine N-doped carbon materials. We demonstrate that single C atom vacancies doped with pyridine N atoms are the primary active centers for the catalytic oxidation of SO₂.

Sulfur-mediated synthesis of N-doped carbon supported cobalt catalysts derived from cobalt porphyrin for ethylbenzene oxidation

Nitrogen-doped carbon supported cobalt catalysts are synthesized by a sulfur-mediated heat treatment.

Mesoporous carbon derived from vitamin B12: a high-performance bifunctional catalyst for imine formation

Mesoporous carbon derived from natural vitamin B₁₂ is applied for the first time in organic synthesis and exhibits exceptionally high dual activity for imine formation via the cross-coupling of alcohols with amines and the self-coupling of primary amines.

Dissociation of O2 and its reactivity on O/S doped graphene

O/S doping promotes the dissociation of O₂, which forming epoxy and/or carbonyl groups on the doped-GP surfaces. The catalytic loop for the oxidation of SO₂ is terminated because of high oxidation barrier due to the formation of the carbonyl group.

Palladium-catalyzed Heck-type reaction of oximes with allylic alcohols: synthesis of pyridines and azafluorenones

An efficient palladium-catalyzed Heck-type reaction of oximes with allylic alcohol has been developed for the synthesis of pyridines and azafluorenones.

Trapping oxygen in hierarchically porous carbon nano-nets: graphitic nitrogen dopants boost the electrocatalytic activity

Graphitic-nitrogen doped hierarchically porous carbon nano-nets exhibited excellent ORR and OER activities for constructing rechargeable two-electrode Zn–air batteries.

Highly active electron-deficient Pd clusters on N-doped active carbon for aromatic ring hydrogenation

Pyridinic nitrogen species in N-doped active carbon (xN-AC) are responsible for high activity of ring hydrogenation via the formation of a high percentage of electron-deficient Pd clusters.

Near-Infrared- and Visible-Light-Enhanced Metal-Free Catalytic Degradation of Organic Pollutants over Carbon-Dot-Based Carbocatalysts Synthesized from Biomass

Cost-efficient nanoparticle carbocatalysts composed of fluorescent carbon dots (CDs) embedded in carbon matrix were synthesized via one-step acid-assisted hydrothermal treatment (200 °C) of glucose. These as-synthesized CD-based carbocatalysts have excellent photoluminescence (PL) properties over a broad range of wavelengths and the external visible or NIR irradiation on the carbocatalysts could produce electrons to form electron-hole (e(-)-h(+)) pairs on the surface of carbocatalysts. These restant electron-hole pairs will react with the adsorbed oxidants/reducers on the surface of the CD-based carbocatalysts to produce active radicals for reduction of 4-nitrophenol and degradation of dye molecules. Moreover, the local temperature increase over CD-based carbocatalyst under NIR irradiation can enhance the electron transfer rate between the organic molecules and CD-based carbocatalysts, thus obviously increase the catalytic activity of the CD-based carbocatalyst for the reduction of 4-nitrophenol and the degradation of dye molecules. Such a type of CD-based carbocatalysts with excellent properties and highly efficient metal-free photocatalytic activities is an ideal candidate as photocatalysts for the reduction of organic pollutants under visible light and NIR radiation.

Activation of CO and CO2 on homonuclear boron bonds of fullerene-like BN cages: first principles study

Using density functional theory we investigate the electronic and atomic structure of fullerene-like boron nitride cage structures. The pentagonal ring leads to the formation of homonuclear bonds. The homonuclear bonds are also found in other BN structures having pentagon line defect. The calculated thermodynamics and vibrational spectra indicated that, among various stable configurations of BN-60 cages, the higher number of homonuclear N-N bonds and lower B:N ratio can result in the more stable structure. The homonuclear bonds bestow the system with salient catalytic properties that can be tuned by modifying the B atom bonding environment. We show that homonuclear B-B (B2) bonds can anchor both oxygen and CO molecules making the cage to be potential candidates as catalyst for CO oxidation via Langmuir-Hinshelwood (LH) mechanism. Moreover, the B-B-B (B3) bonds are reactive enough to capture, activate and hydrogenate CO2 molecules to formic acid. The observed trend in reactivity, viz B3 > B2 > B1 is explained in terms of the position of the boron defect state relative to the Fermi level.

Rationale of the effects from dopants on C-H bond activation for sp(2) hybridized nanostructured carbon catalysts

Doping has become an effective way to tune the catalytic properties of nanostructured carbon catalysts. Taking C-H activation as an example, first-principles calculations propose that the relative energy level and the BEP rule might be applicable to explain the observed doping effects. Moreover, boron doping is proposed as an effective way to enhance the catalytic performance.

Nitrogen-doped dual mesoporous carbon for the selective oxidation of ethylbenzene

A nanocasting method to fabricate nitrogen-doped dual mesoporous carbon is proposed by the carbonization of nitrile functional ionic liquid (FIL) grafted SBA-15 for the first time. These carbon materials have high nitrogen content (12.8%), large specific surface areas (763 m(2) g(-1)) and uniform rod morphologies, which are derived from FILs grafted on the surface of SBA-15. Furthermore, by adjusting the impregnation amount of ionic liquids on SBA-15, pore structures of these carbon materials can be adjusted from single to dual mesopores. The developed dual mesoporous carbon materials exhibit good catalytic performance in the selective oxidation of ethylbenzene, ascribed to the promoting effects of nitrogen-doping, high surface area and dual mesostructure. It may be concluded that the dual mesostructure has an advantage over a single mesostructure to obtain a fast mass transport rate, resulting in higher acetophenone yield.

Nitrogen-Doped Porous Carbons As Electrode Materials for High-Performance Supercapacitor and Dye-Sensitized Solar Cell

Activated N-doped porous carbons (a-NCs) were synthesized by pyrolysis and alkali activation of graphene incorporated melamine formaldehyde resin (MF). The moderate N doping levels, mesopores rich porous texture, and incorporation of graphene enable the applications of a-NCs in surface and conductivity dependent electrode materials for supercapacitor and dye-sensitized solar cell (DSSC). Under optimal activation temperature of 700 °C, the afforded sample, labeled as a-NC700, possesses a specific surface area of 1302 m2 g(-1), a N fraction of 4.5%, and a modest graphitization. When used as a supercapacitor electrode, a-NC700 offers a high specific capacitance of 296 F g(-1) at a current density of 1 A g(-1), an acceptable rate capability, and a high cycling stability in 1 M H2SO4 electrolyte. As a result, a-NC700 supercapacitor delivers energy densities of 5.0-3.5 Wh kg(-1) under power densities of 83-1609 W kg(-1). Moreover, a-NC700 also demonstrates high electrocatalytic activity for I3- reduction. When employed as a counter electrode (CE) of DSSC, a power conversion efficiency (PCE) of 6.9% is achieved, which is comparable to that of the Pt CE based counterpart (7.1%). The excellent capacitive and photovoltaic performances highlight the potential of a-NCs in sustainable energy devices.