Protein adsorption in three dimensions

Elastin-Like Protein, with Statherin Derived Peptide, Controls Fluorapatite Formation and Morphology

The process of enamel biomineralization is multi-step, complex and mediated by organic molecules. The lack of cells in mature enamel leaves it unable to regenerate and hence novel ways of growing enamel-like structures are currently being investigated. Recently, elastin-like protein (ELP) with the analog N-terminal sequence of statherin (STNA15-ELP) has been used to regenerate mineralized tissue. Here, the STNA15-ELP has been mineralized in constrained and unconstrained conditions in a fluoridated solution. We demonstrate that the control of STNA15-ELP delivery to the mineralizing solution can form layered ordered fluorapatite mineral, via a brushite precursor. We propose that the use of a constrained STNA15-ELP system can lead to the development of novel, bioinspired enamel therapeutics.

Compliant substratum guides endothelial commitment from human pluripotent stem cells

The role of mechanical regulation in driving human induced pluripotent stem cell (hiPSC) differentiation has been minimally explored. Although endothelial cell (EC) fate from hiPSCs has been demonstrated using small molecules to drive mesoderm induction, the effects of substrate stiffness with regard to EC differentiation efficiency have yet to be elucidated. We hypothesized that substrate compliance can modulate mesoderm differentiation kinetics from hiPSCs and affect downstream EC commitment. To this end, we used polydimethylsiloxane (PDMS)-a transparent, biocompatible elastomeric material-as a substrate to study EC commitment of hiPSCs using a stepwise differentiation scheme. Using physiologically stiff (1.7 MPa) and soft (3 kPa) PDMS substrates, compared to polystyrene plates (3 GPa), we demonstrate that mechanical priming during mesoderm induction activates the Yes-associated protein and drives Wnt/β-catenin signaling. When mesoderm differentiation was induced on compliant PDMS substrates in both serum and serum-free E6 medium, mesodermal genetic signatures (T, KDR, MESP-1, GATA-2, and SNAIL-1) were enhanced. Furthermore, examination of EC fate following stiffness priming revealed that compliant substrates robustly improve EC commitment through VECad, CD31, vWF, and eNOS marker expression. Overall, we show that substrate compliance guides EC fate by enhancing mesoderm induction through Wnt activation without the addition of small molecules. These findings are the first to show that the mechanical context of the differentiation niche can be as potent as chemical cues in driving EC identity from hiPSCs.

Bacteriostatic behavior of surface modulated silicon nitride in comparison to polyetheretherketone and titanium

Perioperative and latent infections are leading causes of revision surgery for orthopaedic devices resulting in significant increased patient care, comorbidities, and attendant costs. Identifying biomaterial surfaces that inherently resist biofilm adhesion and bacterial expression is an important emerging strategy in addressing implant-related infections. This in vitro study was designed to compare biofilm formation on three biomaterials commonly employed in spinal fusion surgery-silicon nitride (Si₃ N₄ ), polyetheretherketone (PEEK), and a titanium alloy (Ti6Al4V-ELI) -using one gram-positive and one gram-negative bacterial species. Disc samples from various surface treated Si₃ N₄ , PEEK, and Ti6Al4V were inoculated with 10⁵ CFU/mm² Staphylococcus epidermidis (ATCC®14990™) or Escherichia coli (ATCC^® 25922™) and cultured in PBS, 7% glucose, and 10% human plasma for 24 and 48 h, followed by retrieval and rinsing. Vortexed solutions were diluted, plated, and incubated at 37 °C for 24 to 48 h. Colony forming units (CFU/mm² ) were determined using applicable dilution factors and surface areas. A two-tailed, heteroscedastic Student's t-test (95% confidence) was used to determine statistical significance. The various Si₃ N₄ samples showed the most favorable bacterial resistance for both bacilli tested. The mechanisms for the bacteriostatic behavior of Si₃ N₄ are likely due to multivariate surface effects including submicron-topography, negative charging, and chemical interactions which form peroxynitrite (an oxidative agent). Si₃ N₄ is a new biomaterial with the apparent potential to inhibit biofilm formation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1521-1534, 2017.

Effect of construction of TiO2 nanotubes on platelet behaviors: Structure-property relationships

Blood compatibility of TiO₂ nanotubes (TNTs) has been assessed in rabbit platelet-rich plasma (PRP), which combines activation of both blood plasma coagulation and platelets. We find that (i) amorphous TiO₂ nanotubes (TNTs) with relatively larger outer diameters led to reduced platelet adhesion/activation, (ii) TNTs with relatively smaller outer diameters in a predominately rutile phase also inhibited platelet adhesion and activation, and (iii) a pervasive fibrin network formed on larger outer diameter TNTs in a predominately anatase phase. Thus, this study suggests that combined effect of crystalline phase and surface chemistry controls blood-contact behavior of TNTs. A more comprehensive mechanism is proposed for understanding hemocompatibility of TiO₂ which might prove helpful as a guide to prospective design of TiO₂-based biomaterials.

STATEMENT OF SIGNIFICANCE

To realize optimal design and construction of biomaterials with desired properties for blood contact materials, a comprehensive understanding of structure-property relationships is required. In the existing literature, TiO₂ nanotube has been reported to be a good candidate for biomedical applications. However, it is noticeable that the blood compatibility of TiO₂ nanotubes (TNTs) remains obscure or even inconsistent in the previously published works. The inconsistency could derive from different research protocols, material properties or blood sources. Thus, a thorough investigation of the effect of surface properties on blood compatibility is crucial to the development of titanium based materials. In this paper, we explored the effect of surface properties on the response of platelet-rich plasma, especially surface morphology, chemistry, wettability and crystalline phase. The results indicated that crystalline phase was a dominant factor in platelet behaviors. Reduced adhesion and activation of platelets were observed on amorphous and rutile dominated TNTs, whereas anatase dominated TNTs activated the formation of fibrin network. We further proposed a hypothetical mechanism for better understanding of how surface properties affect the response of platelet-rich plasma. Therefore, this study expands the fundamental understanding of the structure-property relationships of titanium based materials.

Anti-thrombotic technologies for medical devices

Thrombosis associated with medical devices may lead to dramatic increases in morbidity, mortality and increased health care costs. Innovative strategies are being developed to reduce this complication and provide a safe biocompatible interface between device and blood. This article aims to describe the biological phenomena underlying device-associated thrombosis, and surveys the literature describing current and developing technologies designed to overcome this challenge. To reduce thrombosis, biomaterials with varying topographical properties and incorporating anti-thrombogenic substances on their surface have demonstrated potential. Overall, there is extensive literature describing technical solutions to reduce thrombosis associated with medical devices, but clinical results are required to demonstrate significant long-term benefits.

Quantitative Control of Protein and Cell Interaction with Nanostructured Surfaces by Cluster Assembling

The development of smart prosthetics, scaffolds, and biomaterials for tissue engineering and organ-on-a-chip devices heavily depends on the understanding and control of biotic/abiotic interfaces. In recent years, the nanometer scale emerged as the predominant dimension for processes impacting on protein adsorption and cellular responses on surfaces. In this context, the extracellular matrix (ECM) can be seen as the prototype for an intricate natural structure assembled by nanoscale building blocks forming highly variable nanoscale configurations, dictating cellular behavior and fate. How exactly the ECM nanotopography influences mechanotransduction, that is, the cellular capacity to convert information received from the ECM into appropriate responses, remains partially understood due to the complexity of the involved biological structures, limiting also the attempts to artificially reproduce the nanoscale complexity of the ECM. In this Account, we describe and discuss our strategies for the development of an efficient and large-scale bottom-up approach to fabricate surfaces with multiscale controlled disorder as substrates to study quantitatively the effect of nanoscale topography on biological entities. Our method is based on the use of supersonic cluster beam deposition (SCBD) to assemble, on a substrate, neutral clusters produced in the gas phase and accelerated by a supersonic expansion. The assembling of clusters in the ballistic deposition regime follows simple scaling laws, allowing the quantitative control of surface roughness and asperity layout over large areas. Due to their biocompatibility, we focused on transition metal oxide nanostructured surfaces assembled by titania and zirconia clusters. We demonstrated the engineering of structural and functional properties of the cluster-assembled surfaces with high relevance for interactions at the biotic/abiotic interface. We observed that isoelectric point and wettability, crucial parameters for the adhesion of biological entities on surfaces, are strongly influenced and controlled by the nanoscale roughness. By developing a high-throughput method (protein surface interaction microarray, PSIM), we characterized quantitatively the capacity of the nanostructured surfaces to adsorb proteins, showing that with increasing roughness the adsorption rises beyond what could be expected by the increase in specific area, paralleled by an almost linear decrease in protein binding affinity. We also determined that the spatial layout of the surface asperities effectively perceived by the cells mimics at the nanoscale the topographical ECM characteristics. The interaction with these features consequently regulates parameters significant for cell adhesion and mechanotransductive signaling, such as integrin clustering, focal adhesion maturation, and the correlated cellular mechanobiology, eventually impacting the cellular program and differentiation, as we specifically showed for neuronal cells.

A Review of Techniques to Measure Protein Sorption to Soft Contact Lenses

PURPOSE

To compare and critically evaluate a variety of techniques to measure the quantity and biological activity of protein sorption to contact lenses over short time periods.

METHODS

A literature review was undertaken investigating the major techniques to measure protein sorption to soft contact lens materials, with specific reference to measuring protein directly on lenses using in situ, ex situ, protein structural, and biological activity techniques.

RESULTS

The use of in situ techniques to measure protein quantity provides excellent sensitivity, but many are not directly applicable to contact lenses. Many ex situ techniques struggle to measure all sorbed proteins, and these measurements can have significant signal interference from the lens materials themselves. Techniques measuring the secondary and tertiary structures of sorbed proteins have exhibited only limited success.

CONCLUSIONS

There are a wide variety of techniques to measure both the amount of protein and the biological activity of protein sorbed to soft contact lens materials. To measure the mass of protein sorbed to soft contact lenses (not just thin films) over short time periods, the method of choice should be I radiolabeling. This technique is sensitive enough to measure small amounts of deposited protein, provided steps are taken to limit and measure any interaction of the iodine tracer with the materials. To measure the protein activity over short time periods, the method of choice should be to measure the biological function of sorbed proteins. This may require new methods or adaptations of existing ones.

Evaluation of the role of substrate and albumin on Pseudomonas aeruginosa biofilm morphology through FESEM and FTIR studies on polymeric biomaterials

Bacterial biofilms pose the greatest challenge to implant surgeries leading to device-related infections and implant failure. Our present study aims at monitoring the variation in the biofilm architecture of a clinically isolated strain and ATCC 27853 strain of Pseudomonas aeruginosa on two polymeric biomaterials, used in implants. The perspective of our study is to recognize the potential of these two biomaterials to create biofilm infections and develop the understanding regarding their limitations of use and handle patients with this deeper insight. The final goal, however, is an accurate interpretation of substrate-microbe interactions in the two biomaterials, which will provide us the knowledge of possible surface modifications to develop of an efficacious anti-biofilm therapy for deterring implant infections. The reference strain ATCC 27853 and a clinical isolate of P. aeruginosa collected from urinary catheters of patients suffering from urinary tract infections, have been used as microbes while clinical grades of polypropylene and high density polyethylene, have been used as 'substrates' for biofilm growth. The variation in the nature of the 'substrate' and 'conditioning layer' of BSA have been found to affect the biofilm architecture as well as the physiology of the biofilm-forming bacteria, accompanied by an alteration in the nature and volume of EPS (extracellular polysaccharide) matrices.

Activation of Macrophages in Response to Biomaterials

Macrophages are the initial biologic responders to biomaterials. These highly plastic immune sentinels control and modulate responses to materials, foreign or natural. The responses may vary from immune stimulatory to immune suppressive. Several parameters have been identified that influence macrophage response to biomaterials, specifically size, geometry, surface topography, hydrophobicity, surface chemistry, material mechanics, and protein adsorption. In this review, the influence of these parameters is supported with examples of both synthetic and naturally derived materials and illustrates that a combination of these parameters ultimately influences macrophage responses to the biomaterial. Having an understanding of these properties may lead to highly efficient design of biomaterials with desirable biologic response properties.

Long term in vivo functional stability and encapsulation reliability of using ultra-nanocrystalline diamond as an insulating coating layer for implantable microchips

Thin ultra-nanocrystalline diamond (UNCD) films were evaluated for their use as encapsulating coatings for long-term implantable microchips.

Controlling adsorption and passivation properties of bovine serum albumin on silica surfaces by ionic strength modulation and cross-linking

Understanding the physicochemical factors that influence protein adsorption onto solid supports holds wide relevance for fundamental insights into protein structure and function as well as for applications such as surface passivation.

Evaluation of the osteoconductive potential of poly(propylene carbonate)/nano-hydroxyapatite composites mimicking the osteogenic niche for bone augmentation

Nano-hydroxyapatite (n-HA) reinforced poly(propylene carbonate) (PPC) composites were prepared for bone repair and reconstruction. The effects of reinforcement on the morphology, mechanical properties and biological performance of n-HA/PPC composites were investigated. The surface morphology and mechanical properties of the composites were characterized by scanning electron microscopy (SEM) and universal material testing machine. The analytical data showed that good incorporation and dispersion of n-HA crystals could be obtained in the PPC matrix at a 30:70 weight ratio. With the increase of n-HA content, the tensile strength increased and the fracture elongation rate decreased. In vitro cell culture revealed that the composite was favorable template for cell attachment and growth. In vivo implantation in femoral condyle defects of rabbits confirmed that the n-HA/PPC composite had good biocompatibility and gradual biodegradability, exhibiting good performance in guided bone regeneration. The results demonstrates that the incorporation of n-HA crystals into PPC matrix provides a practical way to produce biodegradable and cost-competitive composites mimicking the osteogenic niche for bone augmentation.

Salivary and pellicle proteome: A datamining analysis

We aimed to comprehensively compare two compartmented oral proteomes, the salivary and the dental pellicle proteome. Systematic review and datamining was used to obtain the physico-chemical, structural, functional and interactional properties of 1,515 salivary and 60 identified pellicle proteins. Salivary and pellicle proteins did not differ significantly in their aliphatic index, hydrophaty, instability index, or isoelectric point. Pellicle proteins were significantly more charged at low and high pH and were significantly smaller (10–20 kDa) than salivary proteins. Protein structure and solvent accessible molecular surface did not differ significantly. Proteins of the pellicle were more phosphorylated and glycosylated than salivary proteins. Ion binding and enzymatic activities also differed significantly. Protein-protein-ligand interaction networks relied on few key proteins. The identified differences between salivary and pellicle proteins could guide proteome compartmentalization and result in specialized functionality. Key proteins could be potential targets for diagnostic or therapeutic application.

Insulin Aggregation at a Dynamic Solid-Liquid-Air Triple Interface

Therapeutic proteins are privileged in drug development because of their exquisite specificity, which is due to their three-dimensional conformation in solution. During their manufacture, storage, and delivery, interactions with material surfaces and air interfaces are known to affect their stability. The growing use of automated devices for handling and injection of therapeutics increases their exposure to protocols involving intermittent wetting, during which the solid-liquid and liquid-air interfaces meet at a triple contact line, which is often dynamic. Using a microfluidic setup, we analyze the effect of a moving triple interface on insulin aggregation in real time over a hydrophobic surface. We combine thioflavin T fluorescence and reflection interference microscopy to concomitantly monitor insulin aggregation and the morphology of the liquid as it dewets the surface. We demonstrate that insulin aggregates in the region of a moving triple interface and not in regions submitted to hydrodynamic shear stress alone, induced by the moving liquid. During dewetting, liquid droplets form on the surface anchored by adsorbed proteins, and the accumulation of amyloid aggregates is observed exclusively as fluorescent rings growing eccentrically around these droplets. The fluorescent rings expand until the entire channel surface sweeped by the triple interface is covered by amyloid fibers. On the basis of our experimental results, we propose a model describing the growth mechanism of insulin amyloid fibers at a moving triple contact line, where proteins adsorbed at a hydrophobic surface are exposed to the liquid-air interface.

Graphical analysis of mammalian cell adhesion in vitro

Short-term (<2h) cell adhesion kinetics of 3 different mammalian cell types: MDCK (epithelioid), MC3T3-E1 (osteoblastic), and MDA-MB-231 (cancerous) on 7 different substratum surface chemistries spanning the experimentally-observable range of water wettability (surface energy) are graphically analyzed to qualitatively elucidate commonalities and differences among cell/surface/suspending media combinations. We find that short-term mammalian cell attachment/adhesion in vitro correlates with substratum surface energy as measured by water adhesion tension, τ≡γ_lvcosθ, where γ_lv is water liquid-vapor interfacial energy (72.8   mJ/m²) and cosθ is the cosine of the advancing contact angle subtended by a water droplet on the substratum surface. No definitive functional relationships among cell-adhesion kinetic parameters and τ were observed as in previous work, but previously-observed general trends were reproduced, especially including a sharp transition in the magnitude of kinetic parameters from relatively low-to-high near τ=0mJ/m², although the exact adhesion tension at which this transition occurs is difficult to accurately estimate from the current data set. We note, however, that the transition is within the hydrophobic range based on the τ=30mJ/m² surface-energetic dividing line that has been proposed to differentiate "hydrophobic" surfaces from "hydrophilic". Thus, a rather sharp hydrophobic/hydrophilic contrast is observed for cell adhesion for disparate cell/surface combinations.

Small Surfactant Concentration Differences Influence Adsorption of Human Serum Albumin on Polystyrene Nanoparticles

Surfactants, even in miniscule amounts, are often used for the synthesis and especially the stabilization of nanomaterials, which is essential for in vivo applications. In this study, we show that the interaction between nanoparticles and proteins strongly depends on the type of stabilizing surfactants and their (small) concentration changes. The reaction between human serum albumin and polystyrene nanoparticles stabilized by an ionic or nonionic surfactant-sodium dodecyl sulfate or Lutensol AT50, respectively-was monitored using isothermal titration calorimetry. It was found that the amount of surfactant molecules on the surface significantly determines the protein binding affinity and adsorption stoichiometry, which is important for all nanomaterials coming into contact with biological components such as blood plasma proteins. Thus after synthesizing nanomaterials for in vivo applications as drug delivery agents, it is crucial to perform a detailed analysis of the obtained surface chemistry that accounts for the presence of minimal amounts of stabilizing agents.

Superhydrophobic materials for biomedical applications

Superhydrophobic surfaces are actively studied across a wide range of applications and industries, and are now finding increased use in the biomedical arena as substrates to control protein adsorption, cellular interaction, and bacterial growth, as well as platforms for drug delivery devices and for diagnostic tools. The commonality in the design of these materials is to create a stable or metastable air layer at the material surface, which lends itself to a number of unique properties. These activities are catalyzing the development of new materials, applications, and fabrication techniques, as well as collaborations across material science, chemistry, engineering, and medicine given the interdisciplinary nature of this work. The review begins with a discussion of superhydrophobicity, and then explores biomedical applications that are utilizing superhydrophobicity in depth including material selection characteristics, in vitro performance, and in vivo performance. General trends are offered for each application in addition to discussion of conflicting data in the literature, and the review concludes with the authors' future perspectives on the utility of superhydrophobic biomaterials for medical applications.

Determination of binding properties of ampicillin in drug-human serum albumin standard solution using N-vinylpyrrolidone copolymer combined with the micellar systems

It is well-known that only the unbound (free) drug fraction can achieve a pharmacological effect. Therefore the determination of free drug concentration is a very important issue in the field of pharmacology. In this study poly-1-vinyl-2-pyrrolidone (VP) crosslinked with divinylbenzene (DVB) compared with the micellar liquid chromatography (MLC) with and without pre-made drug adsorption was used for quantitative analysis of free ampicillin concentration in the standard solution of drug-human serum albumin owing to its ability to block protein adsorption. The commonly recognized adsorption method based on drug adsorption on VP-DVB has been compared to the entirely new application of MLC with direct sample injection (DSI) not requiring pre-made adsorption. Micellar aggregates are able to solubilize various compounds therefore micellar environment can be used for direct determination of free drug concentration. The obtained results show that the free drug concentration values obtained in the micellar systems based on cetyltrimethylammonium bromide (CTAB) (93.98μgL^-1, 78.3%) as well as on polyoxyethylene (23) lauryl ether (Brij35) (91.15μgL^-1, 75.9%) are similar to those obtained after the drug adsorption on VP-DVB using both RP-HPLC (95.85μgmL^-1, 79.9%) and spectrophotometry (96.47μgmL^-1, 80.4%). However, only %PPB (% plasma protein binding) value calculated on the basis of Brij35 retention factor is similar to the literature data. The obtained results are within the analytical range of % of free drug concentration. Therefore N-vinylpyrrolidone copolymer as well as micellar system based on the non-ionic surfactant can be successfully applied for determination of free drug concentration. Moreover, the new application of MLC with DSI can be recognized as a promising, fast and simple method for quantitative determination of free drug concentration.

Thermodynamics of binary gas adsorption in nanopores

MCM-41 nanoporous silicas show a very high selectivity for monoalcohols over aprotic molecules during adsorption of a binary mixture in the gas phase. We present here an original use of gravimetric vapour sorption isotherms to characterize the role played by the alcohol hydrogen-bonding network in the adsorption process. Beyond simple selectivity, vapour sorption isotherms measured for various compositions help to completely unravel at the molecular level the step by step adsorption mechanism of the binary system in the nanoporous solid, from the first monolayers to the complete liquid condensation.

Improved scaffold biocompatibility through anti-Fibronectin aptamer functionalization

Protein adsorption is the first and decisive step to define cell-biomaterial interaction. Guiding the adsorption of desired protein species may represent a viable approach to promote cell activities conducive to tissue regeneration. The aim of the present study was to investigate whether immobilized anti-Fibronectin aptamers could promote the attachment and growth of osteoblastic cells. Polyethyleneglycole diacrylate/thiolated Hyaluronic Acid hydrogels (PEGDA/tHA) were coated with anti-Fibronectin aptamers. Hydrogel loading and Fibronectin bonding were investigated, through spectrophotometry and Bradford assay. Subsequently, human osteoblasts (hOBs) were cultured on hydrogels for 10days in 2D and 3D cultures. Cells were monitored through microscopy and stained for focal adhesions, microfilaments and nuclei using fluorescence microscopy. Samples were also included in paraffin and stained with Hematoxylin-Eosin. Cell number on hydrogels was quantitated over time. Cell migration into the hydrogels was also studied through Calcein AM staining. Aptamers increased the number of adherent hOBs and their cytoplasm appeared more spread and richer in adhesion complexes than on control hydrogels. Viability assays confirmed that significantly more cells were present on hydrogels in the presence of aptamers, already after 48h of culture. When hOBs were encapsulated into hydrogels, cells were more numerous on aptamer-containing PEGDA-tHA. Cells migrated deeper in the gel in the presence of DNA aptamers, appearing on different focus planes. Our data demonstrate that anti-Fibronectin aptamers promote scaffold enrichment for this protein, thus improving cell adhesion and scaffold colonization.

STATEMENT OF SIGNIFICANCE

We believe aptamer coating of biomaterials is a useful and viable approach to improve the performance of scaffold materials for both research and possibly clinical purposes, because different medical devices could be envisaged able to capture bioactive mediators from the patients' blood and concentrate them where they are needed, on the biomaterial itself. At the same time, this technology could be used to confer 3D cell culture scaffold with the ability to store proteins, such as Fibronectin, taking it from the medium and capture what is produced by cells. This is an improvement of traditional biomaterials that can be enriched with exogenous molecules but are not able to selectively capture a desired molecule.

Cell stretching devices as research tools: engineering and biological considerations

Cells within the human body are subjected to continuous, cyclic mechanical strain caused by various organ functions, movement, and growth. Cells are well known to have the ability to sense and respond to mechanical stimuli. This process is referred to as mechanotransduction. A better understanding of mechanotransduction is of great interest to clinicians and scientists alike to improve clinical diagnosis and understanding of medical pathology. However, the complexity involved in in vivo biological systems creates a need for better in vitro technologies, which can closely mimic the cells' microenvironment using induced mechanical strain. This technology gap motivates the development of cell stretching devices for better understanding of the cell response to mechanical stimuli. This review focuses on the engineering and biological considerations for the development of such cell stretching devices. The paper discusses different types of stretching concepts, major design consideration and biological aspects of cell stretching and provides a perspective for future development in this research area.

Reorganization of hydrogen bond network makes strong polyelectrolyte brushes pH-responsive

Weak polyelectrolytes have found extensive practical applications owing to their rich pH-responsive properties. In contrast, strong polyelectrolytes have long been regarded as pH-insensitive based on the well-established fact that the average degree of charging of strong polyelectrolyte chains is independent of pH. The possible applications of strong polyelectrolytes in smart materials have, thus, been severely limited. However, we demonstrate that almost all important properties of strong polyelectrolyte brushes (SPBs), such as chain conformation, hydration, stiffness, surface wettability, lubricity, adhesion, and protein adsorption are sensitive to pH. The pH response originates from the reorganization of the interchain hydrogen bond network between the grafted chains, triggered by the pH-mediated adsorption-desorption equilibrium of hydronium or hydroxide with the brushes. The reorganization process is firmly identified by advanced sum-frequency generation vibrational spectroscopy. Our findings not only provide a new understanding of the fundamental properties of SPBs but also uncover an extensive family of building blocks for constructing pH-responsive materials.

Fluorescence labels may significantly affect the protein adsorption on hydrophilic nanomaterials

Fluorescently labelled proteins are often used to study processes in vitro, e.g. the binding of proteins to cell surfaces or the adsorption of plasma proteins on drug nanocarriers. However, the fact that the fluorescent labelling may affect the protein properties is frequently neglected. On the example of a simple model system, we reiterate the importance of this issue by showing that even a single label may perturb interactions between hydrophilic starch-based nanocapsules and serum albumin and thus prevent binding.

Adsorption of Amino Acids and Peptides on Metal and Oxide Surfaces in Water Environment: A Synthetic and Prospective Review

Amino acids and peptides are often used as "model" segments of proteins for studying their behavior in various types of environments, and/or elaborating functional surfaces. Indeed, though the protein behavior is much more complex than that of their isolated segments, knowledge of the binding mode as well as of the chemical structure of peptides on metal or oxide surfaces is a significant step toward the control of materials in a biological environment. Such knowledge has considerably increased in the past few years, thanks to the combination of advanced characterization techniques and of modeling methods. Investigations of biomolecule-surface interactions in water/solvent environments are quite numerous, but only in a few cases is it possible to reach an understanding of the molecule-(water)-surface interaction with a level of detail comparable to that of the UHV studies. This contribution aims at reviewing the recent data describing the amino acid and peptide interaction with metal or oxide surfaces in the presence of water.

Adsorption and conformational modification of fibronectin and fibrinogen adsorbed on hydroxyapatite. A QCM-D study

Hydroxyapatite is a bioactive ceramic frequently used for bone engineering/replacement. One of the parameters that influence the biological response to implanted materials is the conformation of the first adsorbed protein layer. In this work, the adsorption and conformational changes of two fibroid serum proteins; fibronectin and fibrinogen adsorbed onto four different hydroxyapatite powders are studied with a Quartz Crystal Microbalance with Dissipation (QCM-D). Each of the calcined apatites adsorbs less protein than their corresponding synthesized samples. Adsorption on synthesized samples yields always an extended conformation whereas a reorganization of the layer is observed for the calcined samples. Fg acquires a "Side on" conformation in all the samples at the beginning of the experiment except for one of the synthesized samples where an "End-on" conformation is obtained during the whole experiment. The Extended conformation is the active conformation for Fn. This conformation is favored by apatites with large specific surface area (SSA) and on highly concentrated media. Apatite surface features should be considered in the selection or design of materials for bone regeneration, since it is possible to control the conformation mode of attachment of Fn and Fg by an appropriate selection of them. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2585-2594, 2016.

Specimen Preparation for High-Resolution Cryo-EM

Imaging a material with electrons at near-atomic resolution requires a thin specimen that is stable in the vacuum of the transmission electron microscope. For biological samples, this comprises a thin layer of frozen aqueous solution containing the biomolecular complex of interest. The process of preparing a high-quality specimen is often the limiting step in the determination of structures by single-particle electron cryomicroscopy (cryo-EM). Here, we describe a systematic approach for going from a purified biomolecular complex in aqueous solution to high-resolution electron micrographs that are suitable for 3D structure determination. This includes a series of protocols for the preparation of vitrified specimens on various supports, including all-gold and graphene. We also describe techniques for troubleshooting when a preparation fails to yield suitable specimens, and common mistakes to avoid during each part of the process. Finally, we include recommendations for obtaining the highest quality micrographs from prepared specimens with current microscope, detector, and support technology.

pH Dependence of Adsorbed Fibrinogen Conformation and Its Effect on Platelet Adhesion

Quartz crystal microbalance with dissipation (QCM-D) and dual polarization interferometry (DPI) were used to investigate fibrinogen (Fib) adsorption behavior on different surfaces by changing the pH value. Moreover, integrin adhesion to the adsorbed Fibs was studied using DPI. Qualitative and quantitative studies of platelet adhesion to the adsorbed Fibs were performed using scanning electron microscopy (SEM), confocal laser scanning microscope (CLSM), and released lactate dehydrogenase (LDH) assay. Experimental results indicated that the conformation and orientation of the absorbed Fibs depended on surface property and pH cycling. For the hydrophilic surface, Fibs adsorbed at pH 7.4 and presented a αC-hidden orientation. As a result, no integrin adhesion was observed, and a small number of platelets were adhered because the αC-domains were hidden under the Fib molecule. By changing the rinsing solution pH from 7.4 to 3.2 and then back to 7.4, the adsorbed Fib orientation became αC-exposed via the transformation of Fib conformation during pH cycling. Therefore, integrin adhesion was more likely to occur, and more platelets were adhered and activated. For the hydrophobic surface, the adsorbed Fibs became more spread and stretched due to the strong interaction between the Fibs and surface. αC-exposed orientation remained unchanged when the rinsing solution pH changed from 7.4 to 3.2 and then back to 7.4. Therefore, a large number of integrins and platelets were adhered to the adsorbed Fibs, and almost all of the adhered platelets were activated.

Protein-surface interactions on stimuli-responsive polymeric biomaterials

Responsive surfaces: a review of the dependence of protein adsorption on the reversible volume phase transition in stimuli-responsive polymers. Specifically addressed are a widely studied subset: thermoresponsive polymers. Findings are also generalizable to other materials which undergo a similarly reversible volume phase transition. As of 2015, over 100,000 articles have been published on stimuli-responsive polymers and many more on protein-biomaterial interactions. Significantly, fewer than 100 of these have focused specifically on protein interactions with stimuli-responsive polymers. These report a clear trend of increased protein adsorption in the collapsed state compared to the swollen state. This control over protein interactions makes stimuli-responsive polymers highly useful in biomedical applications such as wound repair scaffolds, on-demand drug delivery, and antifouling surfaces. Outstanding questions are whether the protein adsorption is reversible with the volume phase transition and whether there is a time-dependence. A clear understanding of protein interactions with stimuli-responsive polymers will advance theoretical models, experimental results, and biomedical applications.

Role of pH-induced structural change in protein aggregation in foam fractionation of bovine serum albumin

For reducing protein aggregation in foam fractionation, the role of pH-induced structural change in the interface-induced protein aggregation was analyzed using bovine serum albumin (BSA) as a model protein. The results show that the decrease in pH from 7.0 to 3.0 gradually unfolded the BSA structure to increase the molecular size and the relative content of β-sheet and thus reduced the stability of BSA in the aqueous solution. At the isoelectric point (pH 4.7), BSA suffered the lowest level in protein aggregation induced by the gas-liquid interface. In the pH range from 7.0 to 4.7, most BSA aggregates were formed in the defoaming process while in the pH range from 4.7 to 3.0, the BSA aggregates were formed at the gas-liquid interface due to the unfolded BSA structure and they further aggregated to form insoluble ones in the desorption process.

A new application of micellar liquid chromatography in the determination of free ampicillin concentration in the drug-human serum albumin standard solution in comparison with the adsorption method

The determination of free drug concentration is a very important issue in the field of pharmacology because only the unbound drug fraction can achieve a pharmacological effect. Due to the ability to solubilize many different compounds in micellar aggregates, micellar liquid chromatography (MLC) can be used for direct determination of free drug concentration. Proteins are not retained on the stationary phase probably due to the formation of protein - surfactant complexes which are excluded from the pores of stationary phase. The micellar method is simple and fast. It does not require any pre-preparation of the tested samples for analysis. The main aim of this paper is to demonstrate a completely new applicability of the analytical use of MLC concerning the determination of free drug concentration in the standard solution of human serum albumin. The well-known adsorption method using RP-HPLC and the spectrophotometric technique was applied as the reference method. The results show that the free drug concentration value obtained in the MLC system (based on the RP-8 stationary phase and CTAB) is similar to that obtained by the adsorption method: both RP-HPLC (95.83μgmL(-1), 79.86% of free form) and spectrophotometry (95.71μgmL(-1), 79.76%). In the MLC the free drug concentration was 93.98μgmL(-1) (78.3%). This indicates that the obtained results are within the analytical range of % of free ampicillin fraction and the MLC with direct sample injection can be treated like a promising method for the determination of free drug concentration.

Engineered, Robust Polyelectrolyte Multilayers by Precise Control of Surface Potential for Designer Protein, Cell, and Bacteria Adsorption

Cross-linked layer-by-layer (LbL) assemblies with a precisely tuned surface ζ-potential were fabricated to control the adsorption of proteins, mammalian cells, and bacteria for different biomedical applications. Two weak polyions including a synthesized polyanion and polyethylenimine were assembled under controlled conditions and cross-linked to prepare three robust LbL films as model surfaces with similar roughness and water affinity but displaying negative, zero, and positive net charges at the physiological pH (7.4). These surfaces were tested for their abilities to adsorb proteins, including bovine serum albumin (BSA) and lysozyme (LYZ). In the adsorption tests, the LbL films bind more proteins with opposite charges but less of those with like charges, indicating that electrostatic interactions play a major role in protein adsorption. However, LYZ showed higher nonspecific adsorption than BSA, because of the specific behavior of LYZ molecules, such as stacked multilayer formation during adsorption. To exclude such stacking effects from experiments, protein molecules were covalently immobilized on AFM colloidal probes to measure the adhesion forces against the model surfaces utilizing direct protein molecule-surface contacts. The results confirmed the dominating role of electrostatic forces in protein adhesion. In fibroblast cell and bacteria adhesion tests, similar trends (high adhesion on positively charged surfaces, but much lower on neutral and negatively charged surfaces) were observed because the fibroblast cell and bacterial surfaces studied possess negative potentials. The cross-linked LbL films with improved stability and engineered surface charge described in this study provide an excellent platform to control the behavior of different charged objects and can be utilized in practical biomedical applications.

Polymer chain flexibility-induced differences in fetuin A adsorption and its implications on cell attachment and proliferation

Tissue cells are known to respond to the stiffness of the polymer substrate on which they are grown. It has been suggested that material stiffness influences the composition of the protein layer that adsorbs to the material surface, which affects subsequent cell behavior. Previously, the stiffness of a biomaterial elastomer formed from an acrylated star-poly(d,l lactide-co-ε-caprolactone) was found to influence both fibroblast proliferation as well as the adsorption of certain proteins. However, it remained unresolved as to whether material stiffness influenced protein adsorption from serum supplemented environments and which protein(s) may have been responsible for the difference in fibroblast proliferation. Using quantitative proteomics, we show that polymer stiffness influenced the composition of the protein layers that adsorb from serum supplemented media. Fetuin A was identified as a protein that influenced fibroblast proliferation and, when combined with basic fibroblast growth factor as a medium supplement, improved fibroblast proliferation over 14days. This study is the first to correlate cell proliferation to surface adsorbed fetuin A and presents the potential new application for fetuin A as biomaterial coating or surface modifier. This work also demonstrates a novel application of quantitative proteomics for the investigation of competitive protein adsorption to biomaterial surfaces.

STATEMENT OF SIGNIFICANCE

Cells are able to respond to the stiffness of their material substrate, but the method by which they sense material stiffness is still under investigation. Previously, material stiffness was found to impact the individual adsorption of fibronectin, a protein associated with cell attachment; however, it was unclear if stiffness was able to affect protein adsorption in environments with multiple proteins. This study shows that material stiffness affects the compositions of protein layers adsorbed from supplemented media, and suggests that cells may sense material stiffness via the adsorbed protein layer. Interestingly, fetuin A was found to be affecting cell proliferation and not fibronectin. Finally, this research demonstrates the use of relative quantitation proteomics as a potentially powerful method to improve biomaterial compatibility.

Protein Adsorption on Chemically Modified Block Copolymer Nanodomains: Influence of Charge and Flow

Understanding the interactions of biomacromolecules with nanoengineered surfaces is vital for assessing material biocompatibility. This study focuses on the dynamics of protein adsorption on nanopatterned block copolymers (BCPs). Poly(styrene)-block-poly(1,2-butadiene) BCPs functionalized with an acid, amine, amide, or captopril moieties were processed to produce nanopatterned films. These films were characterized using water contact angle measurements and atomic force microscopy in air and liquid to determine how the modification process affected. wettability and swelling. Protein adsorption experiments were conducted under static and dynamic conditions via a quartz crystal microbalance with dissipation. Proteins of various size, charge, and stability were investigated to determine whether their physical characteristics affected adsorption. Significantly decreased contact angles were caused by selective swelling of modified BCP domains. The results indicate that nanopatterned chemistry and experimental conditions strongly impact adsorption dynamics. Depending on the structural stability of the protein, polyelectrolyte surfaces significantly increased adsorption over controls. Further analysis suggested that protein stability may correlate with dissipation versus frequency plots.

Probing Shear Thinning Behaviors of IgG Molecules at the Air-Water Interface via Rheological Methods

Shear thinning behavior, often observed in shear viscosity tests of IgG therapeutic molecules, could lead to significant disparities in the projections for the viscosity profile of a molecule. Despite its importance, molecular determinants of sheer thinning in protein suspensions are largely unknown. To better understand the factors influencing sheer thinning, viscosity profiles of IgG1 and IgG2 molecules were monitored over a wide range of bulk concentrations (0.007-70 mg/mL). The degree of shear-thinning of 70 and 0.007 mg/mL samples was minimal in comparison to the 0.7 mg/mL solution for both IgG molecules. These observations suggest that bulk concentration alone does not determine the degree of sheer thinning, and additional factors play a role. Additional data reveals, within a threshold range of concentrations, that a strong correlation exists between the degree of shear thinning and the surface area to volume (SA:V) ratio of an IgG sample exposed to the interface. The influence of the interface, however, diminishes when the bulk concentration falls outside this concentration window. Also revealed by interfacial oscillatory rheological testing, both IgG molecules showed solid-like behavior (G'i) at the air-water interface at 0.7 mg/mL, whereas liquid-like behavior (G″i) was dominant at 0.007 and 70 mg/mL concentrations. These observations imply that the lack of solid-like behavior was due to the absence of a network structure. Likewise the addition of polysorbate 20 (PS20) to the 0.7 mg/mL solutions decreased the degree of shear thinning by disrupting the network structure at the interface. Taken together, the results presented here suggest that, although shear thinning behavior is a manifestation of an interfacial, rather than a bulk, phenomenon, the extent of it depends on how susceptible the surface molecules are to the air-water interface, where the surface molecular structures are influenced by the bulk properties.

Enrichment of immunoregulatory proteins in the biomolecular corona of nanoparticles within human respiratory tract lining fluid

When inhaled nanoparticles deposit in the lungs, they transit through respiratory tract lining fluid (RTLF) acquiring a biomolecular corona reflecting the interaction of the RTLF with the nanomaterial surface. Label-free snapshot proteomics was used to generate semi-quantitative profiles of corona proteins formed around silica (SiO2) and poly(vinyl) acetate (PVAc) nanoparticles in RTLF, the latter employed as an archetype drug delivery vehicle. The evolved PVAc corona was significantly enriched compared to that observed on SiO2 nanoparticles (698 vs. 429 proteins identified); however both coronas contained a substantial contribution from innate immunity proteins, including surfactant protein A, napsin A and complement (C1q and C3) proteins. Functional protein classification supports the hypothesis that corona formation in RTLF constitutes opsonisation, preparing particles for phagocytosis and clearance from the lungs. These data highlight how an understanding of the evolved corona is necessary for the design of inhaled nanomedicines with acceptable safety and tailored clearance profiles.

FROM THE CLINICAL EDITOR

Inhaled nanoparticles often acquire a layer of protein corona while they go through the respiratory tract. Here, the authors investigated the identity of these proteins. The proper identification would improve the understanding of the use of inhaled nanoparticles in future therapeutics.

Collagen nanofibril self-assembly on a natural polymeric material for the osteoinduction of stem cells in vitro and biocompatibility in vivo

This manuscript reports the characterization of molecularly self-assembled collagen nanofibers on a natural polymeric microporous structure and their ability to support stem cell differentiation in vitro and host tissue response in vivo.