Strategies for the one-step immobilization–purification of enzymes as industrial biocatalysts

Utility of Silane-Modified Magnesium-Based Magnetic Nanoparticles for Efficient Immobilization of Bacillus thermoamylovorans Lipase

Enzymes and protein's immobilization on magnetic nano supports is emerging as a promising candidate in the food, medical field, and areas of environmental studies. This work presents a study on purified Bacillus thermoamylovorans lipase (BTL) by utilizing tetraethoxysilane (TEOS)-modified magnesium nano ferrite (MgNF) of 20 nm size. Its structural and morphological studies were investigated by powder X-ray diffractometry, high-resolution transmission electron microscopy, etc. Binding of BTL with MgNF was supported by using Fourier transform infrared spectroscopy. Magnetic behavior was examined by the vibrational sample magnetometer and Mössbauer spectrometer graphs. The enzymatic activity of BTL before and after immobilization was studied at different temperatures and reaction time. As per the Lineweaver-Burk plot, immobilized lipase has more biological affinity for fatty acids in comparison to the free lipase, and K_max values of immobilized and free BTL were computed as 6.6 and 7.5 mM respectively, with excellent reusability(> 50%) even till 13 consecutive assay runs. Graphical Abstract.

Immobilized Biocatalysts of Eversa® Transform 2.0 and Lipase from Thermomyces Lanuginosus: Comparison of Some Properties and Performance in Biodiesel Production

Eversa® Transform (ET), and the lipase from Thermomyces lanuginosus (TLL), liquid commercial lipases formulations, have been immobilized on octyl agarose beads and their stabilities were compared. Immobilized and free ET forms were more thermostable than TLL formulations at pH 5.0, 7.0, and 9.0, and the ET immobilized form was more stable in the presence of 90% methanol or dioxane at 25 °C and pH 7. Specific activity versus p-nitrophenyl butyrate was higher for ET than for TLL. However, after immobilization the differences almost disappeared because TLL was very hyperactivated (2.5-fold) and ET increased the activity only by 1.6 times. The enzymes were also immobilized in octadecyl methacrylate beads. In both cases, the loading was around 20 mg/g. In this instance, activity was similar for immobilized TLL and ET using triacetin, while the activity of immobilized ET was lower using (S)-methyl mandelate. When the immobilized enzymes were used to produce biodiesel from sunflower oil and methanol in tert-butanol medium, their performance was fairly similar.

Lipase From Rhizomucor miehei Immobilized on Magnetic Nanoparticles: Performance in Fatty Acid Ethyl Ester (FAEE) Optimized Production by the Taguchi Method

In this communication, it was evaluated the production of fatty acid ethyl ester (FAAE) from the free fatty acids of babassu oil catalyzed by lipase from Rhizomucor miehei (RML) immobilized on magnetic nanoparticles (MNP) coated with 3-aminopropyltriethoxysilane (APTES), Fe₃O₄@APTES-RML or RML-MNP for short. MNPs were prepared by co-precipitation coated with 3-aminopropyltriethoxysilane and used as a support to immobilize RML (immobilization yield: 94.7 ± 1.0%; biocatalyst activity: 341.3 ± 1.2 U_p–NPB/g), which were also activated with glutaraldehyde and then used to immobilize RML (immobilization yield: 91.9 ± 0.2%; biocatalyst activity: 199.6 ± 3.5 U_p–NPB/g). RML-MNP was characterized by X-Ray Powder Diffraction (XRPD), Fourier Transform-Infrared (FTIR) spectroscopy and Scanning Electron Microscope (SEM), proving the incorporation and immobilization of RML on the APTES matrix. In addition, the immobilized biocatalyst presented at 60°C a half-life 16–19 times greater than that of the soluble lipase in the pH range 5–10. RML and RML-MNP showed higher activity at pH 7; the immobilized enzyme was more active than the free enzyme in the pH range (5–10) analyzed. For the production of fatty acid ethyl ester, under optimal conditions [40°C, 6 h, 1:1 (FFAs/alcohol)] determined by the Taguchi method, it was possible to obtain conversion of 81.7 ± 0.7% using 5% of RML-MNP.

Immobilization of laccase on Sepharose-linked antibody support for decolourization of phenol red

Laccases which are considered as "green tools" in biotechnology have potential to degrade toxic contaminants/synthetic dyes present in industrial effluents. The loss in activity and stability of laccases are key challenges faced in their potential industrial applications. Here, laccase from Trametes versicolor (polypore mushroom) was immobilized on Sepharose-linked antibody support to carry out the decolourization of phenol red. This support was prepared by covalent linking of anti-laccase antibodies to CNBr activated Sepharose at pH 8.5, and then laccase was immobilized on this affinity support at pH 5.0. The amount of laccase immobilized was approximately 33 mg per gram of the affinity support, giving an immobilization yield of 83.4%. The immobilized enzyme displayed an activity of 3.88 U with an effectiveness factor (η) of 0.90. Immobilization of laccase led to significant enhancement in thermal and storage stability. The immobilized enzyme retained 44% of its activity after 10 cycles of continuous use. The decolourization of phenol red dye obtained by immobilized and soluble laccase after 6 h of incubation at 50 °C was 80 and 56%, respectively. Thus, immobilization of laccase on Sepharose-linked antibody support leads to remarkable improvement in its various properties, making it more versatile for industrial applications.

Dissecting the Polyhydroxyalkanoate-Binding Domain of the PhaF Phasin: Rational Design of a Minimized Affinity Tag

Phasin PhaF from Pseudomonas putida consists of a modular protein whose N-terminal domain (BioF) has been demonstrated to be responsible for binding to the polyhydroxyalkanoate (PHA) granule. BioF has been exploited for biotechnological purposes as an affinity tag in the functionalization of PHA beads with fusion proteins both in vivo and in vitro The structural model of this domain suggests an amphipathic α-helical conformation with the hydrophobic residues facing the PHA granule. In this work, we analyzed the mean hydrophobicity and the hydrophobic moment of the native BioF tag to rationally design shorter versions that maintain affinity for the granule. Hybrid proteins containing the green fluorescent protein (GFP) fused to the BioF derivatives were studied for in vivo localization on PHA, stability on the surface of the PHA granule against pH, temperature, and ionic strength, and their possible influence on PHA synthesis. Based on the results obtained, a minimized BioF tag for PHA functionalization has been proposed (MinP) that retains similar binding properties but possesses an attractive biotechnological potential derived from its reduced size. The MinP tag was further validated by analyzing the functionality and stability of the fusion proteins MinP-β-galactosidase and MinP-CueO from Escherichia coliIMPORTANCE Polyhydroxyalkanoates (PHAs) are biocompatible, nontoxic, and biodegradable biopolymers with exceptional applications in the industrial and medical fields. The complex structure of the PHA granule can be exploited as a toolbox to display molecules of interest on their surface. Phasins, the most abundant group of proteins on the granule, have been employed as anchoring tags to obtain functionalized PHA beads for high-affinity bioseparation, enzyme immobilization, diagnostics, or cell targeting. Here, a shorter module based on the previously designed BioF tag has been demonstrated to maintain the affinity for the PHA granule, with higher stability and similar functionalization efficiency. The use of a 67% shorter peptide, which maintains the binding properties of the entire protein, constitutes an advantage for the immobilization of recombinant proteins on the PHA surface both in vitro and in vivo.

One Pot Use of Combilipases for Full Modification of Oils and Fats: Multifunctional and Heterogeneous Substrates

Lipases are among the most utilized enzymes in biocatalysis. In many instances, the main reason for their use is their high specificity or selectivity. However, when full modification of a multifunctional and heterogeneous substrate is pursued, enzyme selectivity and specificity become a problem. This is the case of hydrolysis of oils and fats to produce free fatty acids or their alcoholysis to produce biodiesel, which can be considered cascade reactions. In these cases, to the original heterogeneity of the substrate, the presence of intermediate products, such as diglycerides or monoglycerides, can be an additional drawback. Using these heterogeneous substrates, enzyme specificity can promote that some substrates (initial substrates or intermediate products) may not be recognized as such (in the worst case scenario they may be acting as inhibitors) by the enzyme, causing yields and reaction rates to drop. To solve this situation, a mixture of lipases with different specificity, selectivity and differently affected by the reaction conditions can offer much better results than the use of a single lipase exhibiting a very high initial activity or even the best global reaction course. This mixture of lipases from different sources has been called “combilipases” and is becoming increasingly popular. They include the use of liquid lipase formulations or immobilized lipases. In some instances, the lipases have been coimmobilized. Some discussion is offered regarding the problems that this coimmobilization may give rise to, and some strategies to solve some of these problems are proposed. The use of combilipases in the future may be extended to other processes and enzymes.

Parallel Interconnected Kinetic Asymmetric Transformation (PIKAT) with an Immobilized ω-Transaminase in Neat Organic Solvent

Comprising approximately 40% of the commercially available optically active drugs, α-chiral amines are pivotal for pharmaceutical manufacture. In this context, the enzymatic asymmetric amination of ketones represents a more sustainable alternative than traditional chemical procedures for chiral amine synthesis. Notable advantages are higher atom-economy and selectivity, shorter synthesis routes, milder reaction conditions and the elimination of toxic catalysts. A parallel interconnected kinetic asymmetric transformation (PIKAT) is a cascade in which one or two enzymes use the same cofactor to convert two reagents into more useful products. Herein, we describe a PIKAT catalyzed by an immobilized ω-transaminase (ωTA) in neat toluene, which concurrently combines an asymmetric transamination of a ketone with an anti-parallel kinetic resolution of an amine racemate. The applicability of the PIKAT was tested on a set of prochiral ketones and racemic α-chiral amines in a 1:2 molar ratio, which yielded elevated conversions (up to >99%) and enantiomeric excess (ee, up to >99%) for the desired products. The progress of the conversion and ee was also monitored in a selected case. This is the first report of a PIKAT using an immobilized ωTA in a non-aqueous environment.

Extraction and crosslinking of bromelain aggregates for improved stability and reusability from pineapple processing waste

The present study is first of its kind that focuses upon the extraction of bromelain from pineapple core waste and stabilising it as insoluble cross-linked aggregates. The influence of process variables such as the choice of precipitant, type of cross-linker, concentration of cross-linker and the reaction time for cross-linking step was investigated upon the activity recovery of bromelain cross-linked aggregates. The optimization of this biocatalyst preparation specifically recovered 87% of the enzymatic activity available in pineapple core waste by ammonium sulphate (60%, w/v) precipitation followed by cross-linking for 4 h with 80 mM glutaraldehyde. Cross-linked bromelain aggregates were thermally more stable and exhibited higher pH stability in comparison to free bromelain. The cross-linked bromelain aggregates exhibited higher operational stability in different organic solvents at 4 °C. The highest operational stability (% stability given in parenthesis) was observed in acetone (100%) followed by hexane (53.6%), ethyl acetate (39.6%), ethanol (32.5%) and chloroform (14.9%). The kinetic studies revealed higher Km value (5.45 mM) after the formation of cross-linked bromelain aggregates as compared to free bromelain (5.04 mM) with almost similar Vmax values. Cross-linked bromelain aggregates also showed significant reusability characteristics with an activity retention of >85% after 5-time cycles. Such recyclability of bromelain cross-linked aggregates could lead to potential industrial applications in both food and non-food sector. In addition, the present extraction method avoids costs related to purification and expensive immobilization carriers.

Aggregation and Molecular Properties of β-Glucosidase Isoform II in Chayote (Sechium edule)

The presence of isoforms of β-glucosidase has been reported in some grasses such as sorghum, rice and maize. This work aims to extract and characterize isoform II in β-glucosidase from S. edule. A crude extract was prepared without buffer solution and adjusted to pH 4.6. Contaminating proteins were precipitated at 4 °C for 24 h. The supernatant was purified by chromatography on carboxymethyl cellulose (CMC) column, molecular exclusion on Sephacryl S-200HR, and exchange anionic on QFF column. Electrophoretic analyzes revealed a purified enzyme with aggregating molecular complex on SDS-PAGE, Native-PAGE, and AU-PAGE. Twelve peptides fragments were identified by nano liquid chromatography-tandem mass spectrometry (nano LC-ESI-MS/MS), which presented as 61% identical to Cucurbita moschata β-glucosidase and 55.74% identical to β-glucosidase from Cucumis sativus, another Cucurbitaceous member. The relative masses which contained 39% hydrophobic amino acids ranged from 982.49 to 2,781.26. The enzyme showed a specificity to β-d-glucose with a Km of 4.59 mM, a Vmax value of 104.3 μM∙min-1 and a kcat of 10,087 μM∙min-1 using p-nitrophenyl-β-D-glucopyranoside. The presence of molecular aggregates can be attributed to non-polar amino acids. This property is not mediated by a β-glucosidase aggregating factor (BGAF) as in grasses (maize and sorghum). The role of these aggregates is discussed.

Effects of Enzyme Loading and Immobilization Conditions on the Catalytic Features of Lipase From Pseudomonas fluorescens Immobilized on Octyl-Agarose Beads

The lipase from Pseudomonas fluorescens (PFL) has been immobilized on octyl-agarose beads under 16 different conditions (varying pH, ionic strength, buffer, adding some additives) at two different loadings, 1 and 60 mg of enzyme/g of support with the objective of check if this can alter the biocatalyst features. The activity of the biocatalysts versus p-nitrophenyl butyrate and triacetin and their thermal stability were studied. The different immobilization conditions produced biocatalysts with very different features. Considering the extreme cases, using 1 mg/g preparations, PFL stability changed more than fourfolds, while their activities versus pNPB or triacetin varied a 50-60%. Curiously, PFL specific activity versus triacetin was higher using highly enzyme loaded biocatalysts than using lowly loaded biocatalysts (even by a twofold factor). Moreover, stability of the highly loaded preparations was higher than that of the lowly loaded preparations, in many instances even when using 5°C higher temperatures (e.g., immobilized in the presence of calcium, the highly loaded biocatalysts maintained after 24 h at 75°c a 85% of the initial activity, while the lowly loaded preparation maintained only 27% at 70°C). Using the highly loaded preparations, activity of the different biocatalysts versus pNPB varied almost 1.7-folds and versus triacetin 1.9-folds. In this instance, the changes in stability caused by the immobilization conditions were much more significant, some preparations were almost fully inactivated under conditions where the most stable one maintained more than 80% of the initial activity. Results suggested that immobilization conditions greatly affected the properties of the immobilized PFL, partially by individual molecule different conformation (observed using lowly loaded preparations) but much more relevantly using highly loaded preparations, very likely by altering some enzyme-enzyme intermolecular interactions. There is not an optimal biocatalyst considering all parameters. That way, preparation of biocatalysts using this support may be a powerful tool to tune enzyme features, if carefully controlled.

Sustainable Enzymatic Synthesis of a Solketal Ester—Process Optimization and Evaluation of Its Antimicrobial Activity

The present study aims the enzymatic synthesis of solketal palmitate by esterification between solketal and palmitic acid using heptane as solvent. Lipases from Thermomyces lanuginosus (TLL), Candida rugosa type VII (CRL), and Pseudomonas fluorescens (PFL) were immobilized via interfacial activation on rice husk silica functionalized with triethoxy(octyl)silane (Octyl–SiO2) and used as biocatalysts. A loading of 20–22 mg of lipase/g of support was immobilized independently of the studied enzyme. TLL–Octyl–SiO2 was the most active biocatalyst in oil hydrolysis (656.0 ± 23.9 U/g) and ester synthesis (productivity of 6.8 mmol/min.gbiocat), and it has been chosen for further ester synthesis optimization. The effect of some important parameters such as biocatalyst concentration, reaction temperature and acid:alcohol molar ratio on the reaction has been evaluated using a central composite rotatable design at fixed mechanical stirring (240 rpm) and reaction time (15 min). Subsequently, the effect of reactants concentration and molecular sieve concentration has also been examined. Under optimal conditions (56 °C, acid:alcohol molar ratio of 1:3 with a palmitic acid concentration of 1 M, and 20% wt. of TLL–Octyl–SiO2 per volume of reaction mixture), 83% acid conversion was obtained after 150 min of reaction. The biocatalyst retained 87% of its initial activity after seven successive reaction batches. The product was identified by nuclear magnetic resonance analysis. Antimicrobial activity studies showed that the synthesized ester demonstrated antifungal activity against Candida albicans and Candida parapsilosis, with minimum inhibitory concentration (MIC) between 200 and 400 µg/mL, and bacteriostatic/fungistatic action—minimum microbicial concentration (MMC) > 400 µg/mL.

Biocatalysis in the winemaking industry: Challenges and opportunities for immobilized enzymes

Enzymes are powerful catalysts already being used in a large number of industrial processes. Impressive advantages in enzyme catalysts improvement have occurred in recent years aiming to improve their performance under harsh operation conditions far away from those of their cellular habitat. Production levels of the winemaking industry have experienced a remarkable increase, and technological innovations have been introduced for increasing the efficiency at different process steps or for improving wine quality, which is a key issue in this industry. Enzymes, such as pectinases and proteases, have been traditionally used, and others, such as glycosidases, have been more recently introduced in the modern wine industry, and many dedicated studies refer to the improvement of enzyme performance under winemaking conditions. Within this framework, a thorough review on the role of enzymes in winemaking is presented, with special emphasis on the use of immobilized enzymes as a significant strategy for catalyst improvement within an industry in which enzymes play important roles that are to be reinforced paralleling innovation.

Effects of different expression systems on characterization of adenylate deaminase from Aspergillus oryzae

Adenylate deaminase (AMPD) is an amino hydrolase that catalyzes the irreversible hydrolysis of adenosine monophosphate (AMP) to inosine monophosphate (IMP) and ammonia. In this study, the effect of different hosts on the enzymatic properties of AMPD from Aspergillus oryzae GX-08 was investigated and showed that Bacillus subtilis WB600 was more suitable for producing AMPD with a higher activity of 2540 U/mL. After purification, the optimal temperature and pH of recombinant AMPD were 55 °C and pH 6.0, respectively, and its activity was significantly enhanced by 10 mM Fe³⁺ with an increase of 236%. More importantly, the recombinant AMPD specifically and effectively catalyzed the conversion between AMP and IMP, in which 10 mL of crude AMPD achieved a conversion ratio of 76.4% after 40 min. Therefore, B. subtilis WB600 provides a potential platform for producing AMPD with excellent catalytic ability and catalytic specificity.

Immobilisation of lipase enzyme onto bacterial magnetosomes for stain removal

•

Lipase was immobilized on magnetosome via glutaraldehyde, confirmed in FTIR and SEM.

•

Release of p-nitro phenol confirmed the enzyme activity of immobilize lipase (88 %).

•

The optimal pH (7) and temperature (40 °C) was standardised for activity.

•

The immobilized lipase stored at 4 °C retained higher activity (87 %) than free lipase after 30 days.

•

Immobilized lipase removed vegetable oil stain, better cleaning efficiency than free lipase.

Lipase was immobilized onto bacterial magnetosomes using glutaraldehyde cross-linking and confirmed by Fourier transform infrared spectrometry (FT-IR) and Scanning electron microscopy (SEM). Enzyme activity of immobilised lipase as well as free lipase was estimated by the release of p-nitro phenol due to the hydrolysis of p-nitro phenyl acetate (pNPA). The immobilisation yield of lipase onto magnetosome was found to be 88 %. The optimal pH (7) and temperature (40 °C) for activity was standardised and found to be similar to free lipase. The stored immobilized lipase maintained higher activity even after 30 days at a temperature of 4 °C whereas compared to free lipase. Immobilized lipase found to have removed vegetable oil stain and showed higher cleaning efficiency when compared to free lipase. The results suggest that bacterial magnetosome displays great potential as a support material for the immobilization of industrial enzymes such as lipase.

Enzyme production ofd-gluconic acid and glucose oxidase: successful tales of cascade reactions

This review mainly focuses on the use of glucose oxidase in the production ofd-gluconic acid, which is a reactant of undoubtable interest in different industrial areas. As example of diverse enzymatic cascade reactions.

Immobilization of Thermoalkalophilic Lipase from Bacillus atrophaeus FSHM2 on Amine-Modified Graphene Oxide Nanostructures: Statistical Optimization and Its Application for Pentyl Valerate Synthesis

Synthesis of (3-aminopropyl) triethoxysilane (APTES)-functionalized graphene oxide (GO) nanosheets, statistical optimization of conditions for immobilization of Bacillus atrophaeus lipase (BaL) on as-synthesized support, and application of the immobilized BaL for esterification of valeric acid were carried out in this investigation. The optimum specific activity of the immobilized BaL (81.60 ± 0.28 U mg^-1) was achieved at 3 mg mL^-1 of GO-NH₂, 50 mM of phosphate buffer, pH 7.0, 60 min sonication time, 100 mM glutaraldehyde, 25 U mL^-1 of enzyme, and 8 h immobilization time at 4 °C. The immobilized BaL retained about 90% of its initial activity after 10 days of storage. Moreover, about 70% of the initial activity of the immobilized BaL was retained after 10 cycles of application. The results of esterification studies exhibited that maximum pentyl valerate synthesis using the free BaL (34.5%) and the immobilized BaL (92.7%) occurred in the organic solvent medium (xylene) after 48 h of incubation at 60 °C.

Enzyme immobilized in BioMOFs: Facile synthesis and improved catalytic performance

Biological metal-organic frameworks (BioMOFs), an emerging sub-class of MOFs, are prepared from metals and biological ligands (bioligands). Benefit from the low toxicity and good biocompatibility of bioligands, BioMOFs can be used in biomedicine and biocatalysis. In this work, a novel approach was developed for fabricating BioMOFs materials (Co-Cys BioMOFs) from cobalt salt and cystine, meanwhile nitrile hydratase (NHase) was in-situ encapsulated during the synthesis process. The obtained NHase-BioMOFs biocomposits named NHase@Co-Cys was characterized by SEM, TEM, XPS, etc. The preparation parameters and stabilities of NHase@Co-Cys were investigated. The maximum encapsulation yield and specific activity of NHase@Co-Cys were 92.71% and 139.04 U/g_{immobilized NHase}, respectively. The thermal stability of NHase@Co-Cys was improved by approximately 5-fold at 55 °C. The activity of NHase after immobilization was retained nearly 60% after incubating at pH 4.0 and 10.0 for 7 h. The NHase@Co-Cys showed similar catalytic capacity compared with free NHase in producing nicotinamide. After 7 h of reaction catalyzed by free NHase (14.51 U) and NHase@Co-Cys (12.76 U), the yield of nicotinamide was 90.94% and 86.36%, respectively. The activity of NHase@Co-Cys remained 83.85% of the original activity after recycling for 10 times. These results suggested that the NHase@Co-Cys is an effective approach to enhance the enzymatic properties and demonstrated a broad application prospect in industrial production.

Genipin as An Emergent Tool in the Design of Biocatalysts: Mechanism of Reaction and Applications

Genipin is a reagent isolated from the Gardenia jasminoides fruit extract, and whose low toxicity and good crosslinking properties have converted it into a reactive whose popularity is increasing by the day. These properties have made it widely used in many medical applications, mainly in the production of chitosan materials (crosslinked by this reactive), biological scaffolds for tissue engineering, and nanoparticles of chitosan and nanogels of proteins for controlled drug delivery, the genipin crosslinking being a key point to strengthen the stability of these materials. This review is focused on the mechanism of reaction of this reagent and its use in the design of biocatalysts, where genipin plays a double role, as a support activating agent and as inter- or intramolecular crosslinker. Its low toxicity makes this compound an ideal alterative to glutaraldehyde in these processes. Moreover, in some cases the features of the biocatalysts prepared using genipin surpassed those of the biocatalysts prepared using other standard crosslinkers, even disregarding toxicity. In this way, genipin is a very promising reagent in the design of biocatalysts.

On the relationship between structure and catalytic effectiveness in solid surface-immobilized enzymes: Advances in methodology and the quest for a single-molecule perspective

The integration of enzymes with solid materials is important in many biotechnological applications, including the use of immobilized enzymes for biocatalytic synthesis. The development of functional enzyme-material composites is restrained by the lack of molecular-level insight into the behavior of enzymes in confined, surface-near environments. Here, we review recent advances in surface-sensitive spectroscopic techniques that push boundaries for the determination of enzyme structure and orientation at the solid-liquid interface. We discuss recent evidence from single-molecule studies showing that analyses sensitive to the temporal and spatial heterogeneities in immobilized enzymes can succeed in disentangling the effects of conformational stability and active-site accessibility on activity. Different immobilization methods involve distinct trade-off between these effects, thus emphasizing the need for a holistic (systems) view of immobilized enzymes for the rational development of practical biocatalysts.

"Fishing and Hunting"-Selective Immobilization of a Recombinant Phenylalanine Ammonia-Lyase from Fermentation Media

This article overviews the numerous immobilization methods available for various biocatalysts such as whole-cells, cell fragments, lysates or enzymes which do not require preliminary enzyme purification and introduces an advanced approach avoiding the costly and time consuming downstream processes required by immobilization of purified enzyme-based biocatalysts (such as enzyme purification by chromatographic methods and dialysis). Our approach is based on silica shell coated magnetic nanoparticles as solid carriers decorated with mixed functions having either coordinative binding ability (a metal ion complexed by a chelator anchored to the surface) or covalent bond-forming ability (an epoxide attached to the surface via a proper linker) enabling a single operation enrichment and immobilization of a recombinant phenylalanine ammonia-lyase from parsley fused to a polyhistidine affinity tag.

Hierarchical Micro- and Mesoporous Zn-Based Metal-Organic Frameworks Templated by Hydrogels: Their Use for Enzyme Immobilization and Catalysis of Knoevenagel Reaction

Encapsulation of enzymes in metal-organic frameworks (MOFs) is often obstructed by the small size of the orifices typical of most reported MOFs, which prevent the passage of larger-size enzymes. Here, the preparation of hierarchical micro- and mesoporous Zn-based MOFs via the templated emulsification method using hydrogels as a template is presented. Zinc-based hydrogels featuring a 3D interconnecting network are first produced via the formation of hydrogen bonds between melamine and salicylic acid in which zinc ions are well distributed. Further coordination with organic linkers followed by the removal of the hydrogel template produces hierarchical Zn-based MOFs containing both micropores and mesopores. These new MOFs are used for the encapsulation of glucose oxidase and horseradish peroxidase to prove the concept. The immobilized enzymes exhibit a remarkably enhanced increased operational stability and enzymatic activity with a k_cat /k_m value of 85.68 mm s^-1 . This value is 7.7-fold higher compared to that found for the free enzymes in solution, and 2.7-fold higher than enzymes adsorbed on conventional microporous MOFs. The much higher catalytic activity of the mesoporous conjugate for Knoevenagel reactions is demonstrated, since the large pores enable easier access to the active sites, and compared with that observed for catalysis using microporous MOFs.

Sustainable production of nucleoside analogues by a high-efficient purine 2'-deoxyribosyltransferase immobilized onto Ni2+ chelate magnetic microparticles

The present work aims to develop a magnetic biocatalyst for customized production of nucleoside analogues using mutant His-tagged purine 2'-deoxyribosyltransferase from Trypanosoma brucei (TbPDT_V11S) immobilized onto Ni²⁺ chelate magnetic iron oxide porous microparticles (MTbPDT_V11S). Biochemical characterization revealed MTbPDT_V11S5 as optimal candidate for further studies (10,552 IU g^-1; retained activity 54% at 50 °C and pH 6.5). Interestingly, MTbPDT_V11S5 displayed the highest activity value described up to date for an immobilized NDT. Moreover, MTbPDT_V11S5 was successfully employed in the one-pot, one-step production of different therapeutic nucleoside analogues, such as cladribine or 2'-deoxy-2-fluoroadenosine, among others. Finally, MTbPDT_V11S5 proved to be stable when stored at 50 °C for 8 h and pH 6.0 and reusable up to 10 times without negligible loss of activity in the enzymatic production of the antitumor prodrug 2'-deoxy-2-fluoroadenosine.

Preparation of immobilized/stabilized biocatalysts of β-glucosidases from different sources: Importance of the support active groups and the immobilization protocol

β-Glucosidases from two different commercial preparations, Pectinex Ultra SP-L and Celluclast® 1.5L, were immobilized on divinylsulfone (DVS) supports at pH 5.0, 7.0, 9.0, and 10. In addition, the biocatalysts were also immobilized in agarose beads activated by glyoxyl, and epoxide as reagent groups. The best immobilization results were observed using higher pH values on DVS-agarose, and for Celluclast® 1.5L, good results were also obtained using the glyoxil-agarose immobilization. The biocatalyst obtained using Pectinex Ultra SP-L showed the highest thermal stability, at 65°C, and an operational stability of 67% of activity after 10 reuses cycles when immobilized on DVS-agarose immobilized at pH 10 and blocked with ethylenediamine. The β-glucosidase from Celluclast® 1.5L produced best results when immobilized on DVS-agarose immobilized at pH 9 and blocked with glycine, reaching 7.76-fold higher thermal stability compared to its free form and maintaining 76% of its activity after 10 successive cycles. The new biocatalysts obtained by these protocols showed reduction of glucose inhibition of enzymes, demonstrating the influence of immobilization protocols, pH, and blocking agent.