A Highly Amyloidogenic Region of Hen Lysozyme

NMR studies of lysozyme surface accessibility by using different paramagnetic relaxation probes

Paramagnetic probes, whose approach to proteins can be monitored by nuclear magnetic resonance (NMR) studies, have been found to be of primary relevance for investigating protein surfaces' accessibility. Here, a Gd(III) neutral complex which contains two metal ions, [Gd2(L7)(H2O)2], is suggested as a paramagnetic probe particularly suited for systematic NMR investigation of protein surface accessibility, due to an expected high relaxivity and to the lack of electric charge which could favor specific interactions. Hen egg white lysozyme has been used as a model system to verify the absence of preferential approaches of this paramagnetic probe to specific protein moieties by comparing paramagnetic perturbation profiles of 1H-13C HSQC signals obtained in the presence of TEMPOL and [Gd2(L7)(H2O)2]. From the similarity of the measured paramagnetic perturbation profiles induced by the two different probes, specific interactions of [Gd2(L7)(H2O)2] with the enzyme could be ruled out. The large size of the latter probe is suggested to be responsible for the strong paramagnetic perturbations observed for CalphaH groups which are located in convex surface-exposed regions. The combined use of the two probes reveals fine details of the dynamics controlling their approach toward the protein surface.

The first step of hen egg white lysozyme fibrillation, irreversible partial unfolding, is a two-state transition

Amyloid fibril depositions are associated with many neurodegenerative diseases as well as amyloidosis. The detailed molecular mechanism of fibrillation is still far from complete understanding. In our previous study of in vitro fibrillation of hen egg white lysozyme, an irreversible partially unfolded intermediate was characterized. A similarity of unfolding kinetics found for the secondary and tertiary structure of lysozyme using deep UV resonance Raman (DUVRR) and tryptophan fluorescence spectroscopy leads to a hypothesis that the unfolding might be a two-state transition. In this study, chemometric analysis, including abstract factor analysis (AFA), target factor analysis (TFA), evolving factor analysis (EFA), multivariate curve resolution-alternating least squares (ALS), and genetic algorithm, was employed to verify that only two principal components contribute to the DUVRR and fluorescence spectra of soluble fraction of lysozyme during the fibrillation process. However, a definite conclusion on the number of conformers cannot be made based solely on the above spectroscopic data although chemometric analysis suggested the existence of two principal components. Therefore, electrospray ionization mass spectrometry (ESI-MS) was also utilized to address the hypothesis. The protein ion charge state distribution (CSD) envelopes of the incubated lysozyme were well fitted with two principal components. Based on the above analysis, the partial unfolding of lysozyme during in vitro fibrillation was characterized quantitatively and proven to be a two-state transition. The combination of ESI-MS and Raman and fluorescence spectroscopies with advanced statistical analysis was demonstrated to be a powerful methodology for studying protein structural transformations.

Binding of lysozyme to phospholipid bilayers: evidence for protein aggregation upon membrane association

Biological functions of lysozyme, including its antimicrobial, antitumor, and immune-modulatory activities have been suggested to be largely determined by the lipid binding properties of this protein. To gain further insight into these interactions on a molecular level the association of lysozyme to liposomes composed of either 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine or its mixtures with 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-phosphatidylserine, or bovine heart cardiolipin was studied by a combination of fluorescence techniques. The characteristics of the adsorption of lysozyme to lipid bilayers were investigated using fluorescein 5'-isothiocyanate labeled protein, responding to membrane association by a decrease in fluorescence. Upon increasing the content of anionic phospholipids in lipid vesicles, the binding isotherms changed from Langmuir-like to sigmoidal. Using adsorption models based on scaled particle and double-layer theories, this finding was rationalized in terms of self-association of the membrane-bound protein. The extent of quenching of lysozyme tryptophan fluorescence by acrylamide decreased upon membrane binding, revealing a conformational transition for the protein upon its surface association, resulting in a diminished access of the fluorophore to the aqueous phase. Steady-state fluorescence anisotropy of bilayer-incorporated probe 1,6-diphenyl-1,3,5-hexatriene was measured at varying lipid-to-protein molar ratios. Lysozyme was found to increase acyl-chain order for liposomes with the content of acidic phospholipid exceeding 10 mol %. Both electrostatic and hydrophobic protein-lipid interactions can be concluded to modulate the aggregation behavior of lysozyme when bound to lipid bilayers. Modulation of lysozyme aggregation propensity by membrane binding may have important implications for protein fibrillogenesis in vivo. Disruption of membrane integrity by the aggregated protein species is likely to be the mechanism responsible for the cytotoxicity of lysozyme.

A particular hydrophobic cluster in the residual structure of reduced lysozyme drastically affects the amyloid fibrils formation

Six hydrophobic clusters involved in long-range interaction have been identified in the residual structure of reduced lysozyme at pH 2. Recently, it was found that modulation in the residual structure affected amyloid formation. In this paper, we examined the effect of the hydrophobic cluster containing W111 (cluster 5) on amyloid fibril formation of reduced lysozyme. The reduced W62G lysozyme, in which most of the hydrophobic clusters except for cluster 5 are disrupted, formed hardly any amyloid fibrils in comparison with the reduced wild-type. However, the disruption of cluster 5 by the mutation of Trp111 to Gly allowed significant amyloid fibril formation of reduced W62G lysozyme. Moreover, the extent of amyloid formation in the reduced W62G/W111G lysozyme was greater than that of the reduced wild-type lysozyme. From the above results, it became clear that cluster 5 contributed to retarding the amyloid fibrils formation of the W62G lysozyme.

AGGRESCAN: a server for the prediction and evaluation of "hot spots" of aggregation in polypeptides

Background

Protein aggregation correlates with the development of several debilitating human disorders of growing incidence, such as Alzheimer's and Parkinson's diseases. On the biotechnological side, protein production is often hampered by the accumulation of recombinant proteins into aggregates. Thus, the development of methods to anticipate the aggregation properties of polypeptides is receiving increasing attention. AGGRESCAN is a web-based software for the prediction of aggregation-prone segments in protein sequences, the analysis of the effect of mutations on protein aggregation propensities and the comparison of the aggregation properties of different proteins or protein sets.

Results

AGGRESCAN is based on an aggregation-propensity scale for natural amino acids derived from in vivo experiments and on the assumption that short and specific sequence stretches modulate protein aggregation. The algorithm is shown to identify a series of protein fragments involved in the aggregation of disease-related proteins and to predict the effect of genetic mutations on their deposition propensities. It also provides new insights into the differential aggregation properties displayed by globular proteins, natively unfolded polypeptides, amyloidogenic proteins and proteins found in bacterial inclusion bodies.

Conclusion

By identifying aggregation-prone segments in proteins, AGGRESCAN shall facilitate (i) the identification of possible therapeutic targets for anti-depositional strategies in conformational diseases and (ii) the anticipation of aggregation phenomena during storage or recombinant production of bioactive polypeptides or polypeptide sets.

Amyloid fibril formation and disaggregation of fragment 1-29 of apomyoglobin: insights into the effect of pH on protein fibrillogenesis

The N-terminal fragment 1-29 of horse heart apomyoglobin (apoMb(1-29)) is highly prone to form amyloid-like fibrils at low pH. Fibrillogenesis at pH 2.0 occurs following a nucleation-dependent growth mechanism, as evidenced by the thioflavin T (ThT) assay. Transmission electron microscopy (TEM) confirms the presence of regular amyloid-like fibrils and far-UV circular dichroism (CD) spectra indicate the acquisition of a high content of beta-sheet structure. ThT assay, TEM and CD highlight fast and complete disaggregation of the fibrils, if the pH of a suspension of mature fibrils is increased to 8.3. It is of interest that amyloid-like fibrils form again if the pH of the solution is brought back to 2.0. While apoMb(1-29) fibrils obtained at pH 2.0 are resistant to proteolysis by pepsin, the disaggregated fibrils are easily cleaved at pH 8.3 by trypsin and V8 protease, and some of the resulting fragments aggregate very quickly in the proteolysis mixture, forming amyloid-like fibrils. We show that the increase of amyloidogenicity of apoMb(1-29) following acidification or proteolysis at pH 8.3 can be attributed to the decrease of the peptide net charge following these alterations. The results observed here for apoMb(1-29) provide an experimental basis for explaining the effect of charge and pH on amyloid fibril formation by both unfolded and folded protein systems.

Lysozyme Amyloidogenesis Is Accelerated by Specific Nicking and Fragmentation but Decelerated by Intact Protein Binding and Conversion

We have revisited the well-studied heat and acidic amyloid fibril formation pathway (pH 1.6, 65 degrees C) of hen egg-white lysozyme (HEWL) to map the barriers of the misfolding and amyloidogenesis pathways. A comprehensive kinetic mechanism is presented where all steps involving protein hydrolysis, fragmentation, assembly and conversion into amyloid fibrils are accounted for. Amyloid fibril formation of lysozyme has multiple kinetic barriers. First, HEWL unfolds within minutes, followed by irreversible steps of partial acid hydrolysis affording a large amount of nicked HEWL, the 49-101 amyloidogenic fragment and a variety of other species over 5-40 h. Fragmentation forming the 49-101 fragment is a requirement for efficient amyloid fibril formation, indicating that it forms the rate-determining nucleus. Nicked full-length HEWL is recruited efficiently into amyloid fibrils in the fibril growth phase or using mature fibrils as seeds, which abolished the lag phase completely. Mature amyloid fibrils of HEWL are composed mainly of nicked HEWL in the early equilibrium phase but go through a "fibril shaving" process, affording fibrils composed of the 49-101 fragment and 53-101 fragment during more extensive maturation (incubation for longer than ten days). Seeding of the amyloid fibril formation process using sonicated mature amyloid fibrils accelerates the fibril formation process efficiently; however, addition of intact full-length lysozyme at the end of the lag phase slows the rate of amyloidogenesis. The intact full-length protein, in contrast to nicked lysozyme, slows fibril formation due to its slow conversion into the amyloid fold, probably due to inclusion of the non-amyloidogenic 1-48/102-129 portion of HEWL in the fibrils, which can function as a "molecular bumper" stalling further growth.

Lysozyme Amyloid Oligomers and Fibrils Induce Cellular Death via Different Apoptotic/Necrotic Pathways

Among the newly discovered amyloid properties, its cytotoxicity plays a key role. Lysozyme is a ubiquitous protein involved in systemic amyloidoses in vivo and forming amyloid under destabilising conditions in vitro. We characterized both oligomers and fibrils of hen lysozyme by atomic force microscopy and demonstrated their dose (5-50 microM) and time-dependent (6-48 h) effect on neuroblastoma SH-SY5Y cell viability. We revealed that fibrils induce a decrease of cell viability after 6 h due to membrane damage shown by inhibition of WST-1 reduction, early lactate dehydrogenase release, and propidium iodide intake; by contrast, oligomers activate caspases after 6 h but cause the cell viability to decline only after 48 h, as shown by fluorescent-labelled annexin V binding to externalized phosphatidylserine, propidium iodide DNA staining, lactate dehydrogenase release, and by typical apoptotic shrinking of cells. We conclude that oligomers induce apoptosis-like cell death, while the fibrils lead to necrosis-like death. As polymorphism is a common property of an amyloid, we demonstrated that it is not a single uniform species but rather a continuum of cross-beta-sheet-containing amyloids that are cytotoxic. An abundance of lysozyme highlights a universal feature of this phenomenon, indicating that amyloid toxicity should be assessed in all clinical applications involving proteinaceous materials.

Prediction of amyloidogenic and disordered regions in protein chains

The determination of factors that influence protein conformational changes is very important for the identification of potentially amyloidogenic and disordered regions in polypeptide chains. In our work we introduce a new parameter, mean packing density, to detect both amyloidogenic and disordered regions in a protein sequence. It has been shown that regions with strong expected packing density are responsible for amyloid formation. Our predictions are consistent with known disease-related amyloidogenic regions for eight of 12 amyloid-forming proteins and peptides in which the positions of amyloidogenic regions have been revealed experimentally. Our findings support the concept that the mechanism of amyloid fibril formation is similar for different peptides and proteins. Moreover, we have demonstrated that regions with weak expected packing density are responsible for the appearance of disordered regions. Our method has been tested on datasets of globular proteins and long disordered protein segments, and it shows improved performance over other widely used methods. Thus, we demonstrate that the expected packing density is a useful value with which one can predict both intrinsically disordered and amyloidogenic regions of a protein based on sequence alone. Our results are important for understanding the structural characteristics of protein folding and misfolding.

Is it possible to predict amyloidogenic regions from sequence alone?

Identification of potentially amyloidogenic regions in polypeptide chains is very important because the amyloid fibril formation can be induced in most normal proteins. In our work we suggest a new method to detect amyloidogenic regions in protein sequence. It is based on the assumption that packing is tight inside an amyloid and therefore regions which could potentially pack well would have a tendency to form amyloids. This means that the regions with strong expected packing of residues would be responsible for the amyloid formation. We use this property to identify potentially amyloidogenic regions in proteins basing on their amino acid sequences only. Our predictions are consistent with known disease-related amyloidogenic regions for 8 of 11 amyloid-forming proteins and peptides in which the positions of amyloidogenic regions have been revealed experimentally. Predictions of the regions which are responsible for the formation of amyloid fibrils in proteins unrelated to disease have been also done.

Amyloid formation in denatured single-mutant lysozymes where residual structures are modulated

Reduced hen lysozyme has a residual structure involving long-range interaction. It has been demonstrated that a single mutation (A9G, W62G, W111G, or W123G) in the residual structure differently modulates the long-range interactions of reduced lysozyme. To examine whether such variations in the residual structure affect amyloid formation, reduced and alkylated mutant lysozymes were incubated under the amyloid-fibrillation condition. From the analyses of CD spectra and thioflavine T fluorescences, it was suggested that variation in residual structure led to different amyloid formation. Interestingly, the extent of amyloid formation did not always correlate with the extent to which the residual structure was maintained, resulting in the involvement of a hydrophobic cluster normally contained in W111 in the reduced lysozyme.

Normal and aberrant biological self-assembly: Insights from studies of human lysozyme and its amyloidogenic variants

Studies of lysozyme have played a major role over several decades in defining the general principles underlying protein structure, folding, and stability. Following the discovery some 10 years ago that two mutational variants of lysozyme are associated with systemic amyloidosis, these studies have been extended to investigate the mechanism of amyloid fibril formation. This Account describes our present knowledge of lysozyme folding and misfolding, and how the latter can give rise to amyloid disease. It also discusses the significance of these studies for our general understanding of normal and aberrant protein folding in the context of human health and disease.

Alpha-sheet: The toxic conformer in amyloid diseases?

A novel secondary structure, the alpha-sheet, was identified through molecular dynamics (MD) simulations of various proteins associated with amyloid diseases under amyloidogenic conditions. The structure was first predicted by Pauling and Corey, and it has been directly observed in crystal structures of "nonnatural peptides". There are occurrences of alpha-strands and alpha-sheets in the Protein Data Bank, but they are rare. We propose that alpha-sheet is formed during the conformational changes associated with amyloidosis and that it may represent the toxic conformer. Here, structural properties of the alpha-sheet, background information, and experimental support for this novel structure are presented. Finally we speculate about the possible role of this conformation in disease.

Identification of the core structure of lysozyme amyloid fibrils by proteolysis

Human lysozyme variants form amyloid fibrils in individuals suffering from a familial non-neuropathic systemic amyloidosis. In vitro, wild-type human and hen lysozyme, and the amyloidogenic mutants can be induced to form amyloid fibrils when incubated under appropriate conditions. In this study, fibrils of wild-type human lysozyme formed at low pH have been analyzed by a combination of limited proteolysis and Fourier-transform infrared (FTIR) spectroscopy, in order to map conformational features of the 130 residue chain of lysozyme when embedded in the amyloid aggregates. After digestion with pepsin at low pH, the lysozyme fibrils were found to be composed primarily of N and C-terminally truncated protein species encompassing residues 26-123 and 32-108, although a significant minority of molecules was found to be completely resistant to proteolysis under these conditions. FTIR spectra provide evidence that lysozyme fibrils contain extensive beta-sheet structure and a substantial element of non beta-sheet or random structure that is reduced significantly in the fibrils after digestion. The sequence 32-108 includes the beta-sheet and helix C of the native protein, previously found to be prone to unfold locally in human lysozyme and its pathogenic variants. Moreover, this core structure of the lysozyme fibrils encompasses the highly aggregation-prone region of the sequence recently identified in hen lysozyme. The present proteolytic data indicate that the region of the lysozyme molecule that unfolds and aggregates most readily corresponds to the most highly protease-resistant and thus highly structured region of the majority of mature amyloid fibrils. Overall, the data show that amyloid formation does not require the participation of the entire lysozyme chain. The majority of amyloid fibrils formed from lysozyme under the conditions used here contain a core structure involving some 50% of the polypeptide chain that is flanked by proteolytically accessible N and C-terminal regions.

Investigating the structural properties of amyloid-like fibrils formed in vitro from beta2-microglobulin using limited proteolysis and electrospray ionisation mass spectrometry

The protein beta(2)-microglobulin (beta(2)m) aggregates to form classical amyloid fibrils in patients undergoing long-term haemodialysis. Amyloid-like fibrils with a cross-beta fold can also be formed from wild-type beta(2)m under acidic conditions in vitro. The morphology of such fibrils depends critically on the conditions used: incubation of beta(2)m in low ionic strength buffers at pH 2.5 results in the formation of long (microm), straight fibrils while, at pH 3.6, short (<500 nm) fibrils form. At higher ionic strengths (0.2-0.4 M) at pH 1.5-3.6, the fibrils have a distinct curved and nodular morphology. To determine the conformational properties of beta(2)m within in vitro fibrils of different morphologies, limited proteolysis of each fibril type using pepsin was performed and the resulting peptide fragments identified by tandem mass spectrometry. For comparison, the proteolytic degradation patterns of monomeric beta(2)m and seven synthetic peptides spanning the entire sequence of the intact protein were similarly analysed. The results show that fibrils with different morphologies result in distinct digestion patterns. While the curved, worm-like fibrils are relatively weakly protected from proteolysis, the long, straight fibrils formed at pH 2.5 at low ionic strength show only a single cut-site at Val9, demonstrating that substantial refolding of the initially acid-denatured and unprotected state of beta(2)m occurs during assembly. The data demonstrate that the organisation of the polypeptide chain in fibrils with different morphological features differs considerably, despite the fact that the fibrils possess a common cross-beta architecture.

Simulation of pH-dependent edge strand rearrangement in human beta-2 microglobulin

Amyloid fibrils formed from unrelated proteins often share morphological similarities, suggesting common biophysical mechanisms for amyloidogenesis. Biochemical studies of human beta-2 microglobulin (beta2M) have shown that its transition from a water-soluble protein to insoluble aggregates can be triggered by low pH. Additionally, biophysical measurements of beta2M using NMR have identified residues of the protein that participate in the formation of amyloid fibrils. The crystal structure of monomeric human beta2M determined at pH 5.7 shows that one of its edge beta-strands (strand D) adopts a conformation that differs from other structures of the same protein obtained at higher pH. This alternate beta-strand arrangement lacks a beta-bulge, which may facilitate protein aggregation through intermolecular beta-sheet association. To explore whether the pH change may yield the observed conformational difference, molecular dynamics simulations of beta2M were performed. The effects of pH were modeled by specifying the protonation states of Asp, Glu, and His, as well as the C terminus of the main chain. The bulged conformation of strand D is preferred at medium pH (pH 5-7), whereas at low pH (pH < 4) the straight conformation is observed. Therefore, low pH may stabilize the straight conformation of edge strand D and thus increase the amyloidogenicity of beta2M.

Amyloid fibril formation can proceed from different conformations of a partially unfolded protein

Protein misfolding and aggregation are interconnected processes involved in a wide variety of nonneuropathic, systemic, and neurodegenerative diseases. More generally, if mutations in sequence or changes in environmental conditions lead to partial unfolding of the native state of a protein, it will often aggregate, sometimes into well-defined fibrillar structures. A great deal of interest has been directed at discovering the characteristic features of metastable partially unfolded states that precede the aggregated states of proteins. In this work, human muscle acylphosphatase (AcP) has been first destabilized, by addition of urea or by means of elevated temperatures, and then incubated in the presence of different concentrations of 2,2,2, trifluoroethanol ranging from 5% to 25% (v/v). The results show that AcP is able to form both fibrillar and nonfibrillar aggregates with a high beta-sheet content from partially unfolded states with very different structural features. Moreover, the presence of alpha-helical structure in such a state does not appear to be a fundamental determinant of the ability to aggregate. The lack of ready aggregation under some of the conditions examined here is attributable primarily to the intrinsic properties of the solutions rather than to specific structural features of the partially unfolded states that precede aggregation. Aggregation appears to be favored when the solution conditions promote stable intermolecular interactions, particularly hydrogen bonds. In addition, the structures of the resulting aggregates are largely independent of the conformational properties of their soluble precursors.

Protein interactions and misfolding analyzed by AFM force spectroscopy

Protein misfolding is conformational transition dramatically facilitating the assembly of protein molecules into aggregates of various morphologies. Spontaneous formation of specific aggregates, mostly amyloid fibrils, was initially believed to be limited to proteins involved in the development of amyloidoses. However, recent studies show that, depending on conditions, the majority of proteins undergo structural transitions leading to the appearance of amyloidogenic intermediates followed by aggregate formation. Various techniques have been used to characterize the protein misfolding facilitating the aggregation process, but no direct evidence as to how such a conformational transition increases the intermolecular interactions has been obtained as of yet. We have applied atomic force microscopy (AFM) to follow the interaction between protein molecules as a function of pH. These studies were performed for three unrelated and structurally distinctive proteins, alpha-synuclein, amyloid beta-peptide (Abeta) and lysozyme. It was shown that the attractive force between homologous protein molecules is minimal at physiological pH and increases dramatically at acidic pH. Moreover, the dependence of the pulling forces is sharp, suggesting a pH-dependent conformational transition within the protein. Parallel circular dichroism (CD) measurements performed for alpha-synuclein and Abeta revealed that the decrease in pH is accompanied by a sharp conformational transition from a random coil at neutral pH to the more ordered, predominantly beta-sheet, structure at low pH. Importantly, the pH ranges for these conformational transitions coincide with those of pulling forces changes detected by AFM. In addition, protein self-assembly into filamentous aggregates studied by AFM imaging was shown to be facilitated at pH values corresponding to the maximum of pulling forces. Overall, these results indicate that proteins at acidic pH undergo structural transition into conformations responsible for the dramatic increase in interprotein interaction and promoting the formation of protein aggregates.

Lysozyme fibrillation: deep UV Raman spectroscopic characterization of protein structural transformation

Deep ultraviolet resonance Raman spectroscopy was demonstrated to be a powerful tool for structural characterization of protein at all stages of fibril formation. The evolution of the protein secondary structure as well as the local environment of phenylalanine, a natural deep ultraviolet Raman marker, was documented for the fibrillation of lysozyme. Concentration-independent irreversible helix melting was quantitatively characterized as the first step of the fibrillation. The native lysozyme composed initially of 32% helix transforms monoexponentially to an unfolded intermediate with 6% helix with a characteristic time of 29 h. The local environment of phenylalanine residues changes concomitantly with the secondary structure transformation. The phenylalanine residues in lysozyme fibrils are accessible to solvent in contrast to those in the native protein.

Prediction of "hot spots" of aggregation in disease-linked polypeptides

Background

The polypeptides involved in amyloidogenesis may be globular proteins with a defined 3D-structure or natively unfolded proteins. The first class includes polypeptides such as β2-microglobulin, lysozyme, transthyretin or the prion protein, whereas β-amyloid peptide, amylin or α-synuclein all belong to the second class. Recent studies suggest that specific regions in the proteins act as "hot spots" driving aggregation. This should be especially relevant for natively unfolded proteins or unfolded states of globular proteins as they lack significant secondary and tertiary structure and specific intra-chain interactions that can mask these aggregation-prone regions. Prediction of such sequence stretches is important since they are potential therapeutic targets.

Results

In this study we exploited the experimental data obtained in an in vivo system using β-amyloid peptide as a model to derive the individual aggregation propensities of natural amino acids. These data are used to generate aggregation profiles for different disease-related polypeptides. The approach detects the presence of "hot spots" which have been already validated experimentally in the literature and provides insights into the effect of disease-linked mutations in these polypeptides.

Conclusion

The proposed method might become a useful tool for the future development of sequence-targeted anti-aggregation pharmaceuticals.

Lysozyme dimerization: Brownian dynamics simulation

The lysozyme dimerization reaction has been studied within the framework of encounter-complex (EC) formation theory using the MacroDox software package. Two types of energetically favorite ECs were determined. In the first of them, active-center amino acids of lysozyme take part in the complex formation or the second molecule blocks accessibility to active center sterically. Epitope amino-acid residues are involved in the complex of type II. The existence of both types of complexes does not contradict experimental data. Dimer-formation rate constants for different kinds of EC were calculated. Increasing the pH from 2.0 to 10.0 decreases the total positive lysozyme charge and eliminates the unfavorable repulsive electrostatic interaction. The rate constant of EC formation is inversely proportional to the protein total charge. The association rate constant was also enhanced by an increase of ionic strength that screened repulsive electrostatic interaction between positively charged proteins.

Rational design of aggregation-resistant bioactive peptides: reengineering human calcitonin

A high propensity to aggregate into intractable deposits is a common problem limiting the production and use of many peptides and proteins in a wide range of biotechnological and pharmaceutical applications. Many therapeutic polypeptides are frequently abandoned at an early stage in their development because of problems with stability and aggregation. It has been shown recently that parameters describing the physicochemical properties of polypeptides can be used as predictors of protein aggregation. Here we demonstrate that these and similar tools can be applied to the rational redesign of bioactive molecules with a significantly reduced aggregation propensity without loss of physiological activity. This strategy has been exemplified by designing variants of the hormone calcitonin that show a significantly reduced aggregation propensity, yet maintain, or even increase, their potency when compared to the current therapeutic forms. The results suggest that this approach could be used successfully to enhance the solubility and efficacy of a wide range of other peptide and protein therapeutics.

Protein dissection enhances the amyloidogenic properties of alpha-lactalbumin

Alpha-lactalbumin (LA) in its molten globule (MG) state at low pH forms amyloid fibrils. Here, we have studied the aggregation propensities of LA derivatives characterized by a single peptide bond fission (1-40/41-123, named Th1-LA) or a deletion of a chain segment of 12 amino acid residues located at the level of the beta-subdomain of the native protein (1-40/53-123, named desbeta-LA). We have also compared the early stages of the aggregation process of these LA derivatives with those of intact LA. Th1-LA and desbeta-LA aggregate at pH 2.0 much faster than the intact protein and form long and well-ordered fibrils. Furthermore, in contrast to intact LA, the LA derivatives form regular fibrils also at neutral pH, even if at much reduced rate. In acidic solution, Th1-LA and desbeta-LA adopt a MG state which appears to be similar to that of intact LA, as given by spectroscopic criteria. At neutral pH, both Th1-LA and desbeta-LA are able to bind the hydrophobic dye 1-anilinonaphtalene-8-sulfonate, thus indicating the presence of exposed hydrophobic patches. It is concluded that nicked Th1-LA and gapped desbeta-LA are more relaxed and expanded than intact LA and, consequently, that they are more suitable protein species to allow the large conformational transitions required for the polypeptide chain to form the amyloid cross-beta structure. As a matter of fact, the MG of LA attains an even more flexible conformational state during the early phases of the aggregation process at acidic pH, as deduced from the enhancement of its susceptibility to proteolysis by pepsin. Our data indicate that deletion of the beta-subdomain in LA does not alter the ability of the protein to assemble into well-ordered fibrils, implying that this chain region is not essential for the amyloid formation. It is proposed that a proteolytic hydrolysis of a protein molecule at the cellular level can trigger an easier formation of amyloid precipitates and therefore that limited proteolysis of proteins can be a causative mechanism of protein aggregation and fibrillogenesis. Indeed, a vast majority of protein deposits in amyloid diseases are given by protein fragments derived from larger protein precursors.

Water-soluble hybrid nanoclusters with extra bright and photostable emissions: a new tool for biological imaging

We report the generation of a previously unknown class of water-soluble organic-inorganic hybrid nanoclusters composed of silver and thioflavin T with remarkable fluorescent properties. These hybrid nanoclusters display an extra bright fluorescence in aqueous solutions without any detectable photobleaching. Furthermore, the fluorescent nanoclusters can be generated in situ by sensitized photoreduction of Ag+. Organic-inorganic nanoclusters have remarkable advantages over the known classes of fluorescent probes for the development of ultrasensitive biological assays, cell imaging, or studies of single molecules. As an example of a practical biological application, imaging of amyloid fibrils produced from recombinant mammalian prion proteins and nonprion proteins using hybrid nanoclusters is presented.

Observation of sequence specificity in the seeding of protein amyloid fibrils

It is well established that the rate of formation of fibrils by amyloidogenic proteins is enhanced by the addition of preformed fibrils, a phenomenon known as seeding. We show that the efficiency of seeding fibril formation from solutions of hen lysozyme by a series of other proteins depends strongly on the similarity of their sequences. This observation is consistent with the importance of long-range interactions in stabilizing the core structure of amyloid fibrils and may be associated with the existence of a species barrier observed in the transmissible spongiform encephalopathies. In addition, it is consistent with the observation of a single dominant type of protein in the deposits associated with each form of amyloid disease.

Effect of the structure of the denatured state of lysozyme on the aggregation reaction at the early stages of folding from the reduced form

We previously demonstrated that the hydrophobic clusters present in hen lysozyme under denaturing conditions were disrupted by the mutation of Trp62 to Gly (W62G). In order to examine the effects of the structure of the denatured state of W62G lysozyme on folding, we analyzed the early events in the folding of reduced W62G lysozyme in detail. From the exchange measurements of disulfide bonds using the variants containing a pair of cysteine residues (1SS), it was found that the formation of disulfide bond in the W62G1SS lysozyme was not accompanied by a prominent interaction between amino acid residues, indicating that the disruption of the hydrophobic core led to the random folding at the early stages in the process of folding of the reduced lysozyme. On the other hand, analyses of the oxidative-renaturation of reduced W62G lysozymes, as well as measurements of the extent of aggregation of the reduced and carboxy amido methylated W62G lysozyme, indicated that the formation of an aggregate is more prominent in the reduced W62G lysozyme than in the reduced wild-type lysozyme. Moreover, a lag phase was detected in the oxidative-renaturation of reduced W62G lysozyme, as based on observations of the recovery of activity. The simulation of the folding process indicated that intermediates were present at the early stages in the folding of the reduced W62G lysozyme. These results suggest that the presence of the intermediates was derived from the random folding at the early stages in the folding process of reduced W62G lysozyme due to the disruption of the structure of the denatured state. Folding thus appears to have been kinetically delayed by these processes, which then led to the significant aggregation of reduced lysozyme. Moreover, from the analysis of amyloid aggregation of the reduced lysozymes, it was suggested that the disruption of the residual structure in denatured state by W62G mutation deterred the formation of the amyloid fibrils of lysozyme.

Reduced global cooperativity is a common feature underlying the amyloidogenicity of pathogenic lysozyme mutations

One of the 20 or so human amyloid diseases is associated with the deposition in vital organs of full-length mutational variants of the antibacterial protein lysozyme. Here, we report experimental data that permit a detailed comparison to be made of the behaviour of two of these amyloidogenic variants, I56T and D67H, under identical conditions. Hydrogen/deuterium exchange experiments monitored by NMR and mass spectrometry reveal that, despite their different locations and the different effects of the two mutations on the structure of the native state of lysozyme, both mutations cause a cooperative destabilisation of a remarkably similar segment of the structure, comprising in both cases the beta-domain and the adjacent C-helix. As a result, both variant proteins populate transiently a closely similar, partially unstructured intermediate in which the beta-domain and the adjacent C-helix are substantially and simultaneously unfolded, whereas the three remaining alpha-helices that form the core of the alpha-domain still have their native-like structure. We show, in addition, that the binding of a camel antibody fragment, cAb-HuL6, which was raised against wild-type lysozyme, restores to both variant proteins the stability and cooperativity characteristic of the wild-type protein; as a consequence, it inhibits the formation of amyloid fibrils by both variants. These results indicate that the reduction in global cooperativity, and the associated ability to populate transiently a specific, partly unfolded intermediate state under physiologically relevant conditions, is a common feature underlying the behaviour of these two pathogenic mutations. The formation of intermolecular interactions between lysozyme molecules that are in this partially unfolded state is therefore likely to be the fundamental trigger of the aggregation process that ultimately leads to the formation and deposition in tissue of amyloid fibrils.

Protein structural perturbation and aggregation on homogeneous surfaces

We have demonstrated that globular proteins, such as hen egg lysozyme in phosphate buffered saline at room temperature, lose native structural stability and activity when adsorbed onto well-defined homogeneous solid surfaces. This structural loss is evident by alpha-helix to turns/random during the first 30 min and followed by a slow alpha-helix to beta-sheet transition. Increase in intramolecular and intermolecular beta-sheet content suggests conformational rearrangement and aggregation between different protein molecules, respectively. Amide I band attenuated total reflection/Fourier transformed infrared (ATR/FTIR) spectroscopy was used to quantify the secondary structure content of lysozyme adsorbed on six different self-assembled alkanethiol monolayer surfaces with -CH3, -OPh, -CF3, -CN, -OCH3, and -OH exposed functional end groups. Activity measurements of adsorbed lysozyme were in good agreement with the structural perturbations. Both surface chemistry (type of functional groups, wettability) and adsorbate concentration (i.e., lateral interactions) are responsible for the observed structural changes during adsorption. A kinetic model is proposed to describe secondary structural changes that occur in two dynamic phases. The results presented in this article demonstrate the utility of the ATR/FTIR spectroscopic technique for in situ characterization of protein secondary structures during adsorption on flat surfaces.