Biomimetic CaCO3 Mineralization using Designer Molecules and Interfaces

Engineered biomimetic polymers as tunable agents for controlling CaCO3 mineralization

In nature, living organisms use peptides and proteins to precisely control the nucleation and growth of inorganic minerals and sequester CO(2)via mineralization of CaCO(3). Here we report the exploitation of a novel class of sequence-specific non-natural polymers called peptoids as tunable agents that dramatically control CaCO(3) mineralization. We show that amphiphilic peptoids composed of hydrophobic and anionic monomers exhibit both a high degree of control over calcite growth morphology and an unprecedented 23-fold acceleration of growth at a peptoid concentration of only 50 nM, while acidic peptides of similar molecular weight exhibited enhancement factors of only ∼2 or less. We further show that both the morphology and rate controls depend on peptoid sequence, side-chain chemistry, chain length, and concentration. These findings provide guidelines for developing sequence-specific non-natural polymers that mimic the functions of natural peptides or proteins in their ability to direct mineralization of CaCO(3), with an eye toward their application to sequestration of CO(2) through mineral trapping.

Preparation of mineralized nanofibers: collagen fibrils containing calcium phosphate

We report a straightforward, bottom-up, scalable process for preparing mineralized nanofibers. Our procedure is based on flowing feed solution, containing both inorganic cations and polymeric molecules, through a nanoporous membrane into a receiver solution with anions, which leads to the formation of mineralized nanofibers at the exit of the pores. With this strategy, we were able to achieve size control of the nanofiber diameters. We illustrate this approach by producing collagen fibrils with calcium phosphate incorporated inside the fibrils. This structure, which resembles the basic constituent of bones, assembles itself without the addition of noncollagenous proteins or their polymeric substitutes. Rheological experiments demonstrated that the stiffness of gels derived from these fibrils is enhanced by mineralization. Growth experiments of human adipose derived stem cells on these gels showed the compatibility of the fibrils in a tissue-regeneration context.

Calcium phosphate mineralization beneath a polycationic monolayer at the air-water interface

The self-assembly of the amphiphilic block copolymer poly(n-butyl methacrylate)-block-poly[2-(dimethylamino)ethyl methacrylate] at the air-water interface has been investigated at different pH values. Similar to Rehfeldt et al. (J. Phys. Chem. B 2006, 110, 9171), the subphase pH strongly affects the monolayer properties. The formation of calcium phosphate beneath the monolayer can be tuned by the subphase pH and hence the monolayer charge. After 12 h of mineralization at pH 5, the polymer monolayers are still transparent, but transmission electron microscopy (TEM) shows that very thin calcium phosphate fibers form, which aggregate into cotton ball-like features with diameters of 20 to 50 nm. In contrast, after 12 h of mineralization at pH 8, the polymer film is very slightly turbid and TEM shows dense aggregates with sizes between 200 and 700 nm. The formation of calcium phosphate is further confirmed by Raman and energy dispersive X-ray spectroscopy. The calcium phosphate architectures can be assigned to the monolayer charge, which is high at low pH and low at high pH. The study demonstrates that the effects of polycations should not be ignored if attempting to understand the colloid chemistry of biomimetic mineralization. It also shows that basic block copolymers are useful complementary systems to the much more commonly studied acidic block copolymer templates.

Calcium phosphate growth beneath a polycationic monolayer at the air-water interface: effects of oscillating surface pressure on mineralization

The self-assembly of the amphiphilic block copolymer poly(butadiene)-block-poly[2-(dimethylamino)ethyl methacrylate] at the air-water interface and the mineralization of the monolayers with calcium phosphate was investigated at different pH values. As expected for polyelectrolytes, the subphase pH strongly affects the monolayer properties. The focus of the current study, however, is on the effect of an oscillating (instead of a static) polymer monolayer on calcium phosphate mineralization. Monitoring of the surface pressure vs. mineralization time shows that the monolayer is quite stable if the mineralization is performed at pH 8. In contrast, the monolayer at pH 5 shows a measurable decrease of the surface pressure already after ca. 2 h of mineralization. Transmission electron microscopy reveals that mineralization at low pH under constant oscillation leads to small particles, which are arranged in circular features and larger entities with holes of ca. 200 nm. The larger features with the holes disappear as the mineralization is continued in favor of the smaller particles. These grow with time and form necklace-like architectures of spherical particles with a uniform diameter. In contrast, mineralization at pH 8 leads to very uniform particle morphologies already after 2 h. The mineralization products consist of a circular feature with a dark dot in the center. The increasing contrast of the precipitates in the electron micrographs with mineralization time indicates an increasing degree of mineralization vs. reaction time. The study therefore shows that mechanical effects on mineralization at interfaces are quite complex.

Nanosegregated composites of an imidazolium salt and a layered inorganic compound: organization of both anions and cations in interlayer space

The organization of an imidazolium salt in the interlayer space of a layered inorganic compound leads to the formation of nanosegregated composites.

Stabilization of amorphous calcium carbonate by controlling its particle size

Amorphous calcium carbonate (ACC) nanoparticles of different size are prepared using a flow system. Post-synthesis stabilization with a layer of poly[(α,β)-dl-aspartic acid] leads to stabilization of the ACC, but only for particles <100 nm. Larger and uncoated particles readily convert into the crystalline forms of CaCO₃. This shows that ACC is intrinsically stable below 100 nm.

Controlled formation of calcium-phosphate-based hybrid mesocrystals by organic-inorganic co-assembly

An understanding of controlled formation of biomimetic mesocrystals is of great importance in materials chemistry and engineering. Here we report that organic-inorganic hybrid plates and even mesocrystals can be conveniently synthesized using a one-pot reaction in a mixed system of protein (bovine serum albumin (BSA)), surfactant (sodium bis(2-ethylhexyl) sulfosuccinate (AOT)) and supersaturated calcium phosphate solution. The morphologies of calcium-phosphate-based products are analogous to the general inorganic crystals but they have abnormal and interesting substructures. The hybrids are constructed by the alternate stacking of organic layer (thickness of 1.31 nm) and well-crystallized inorganic mineral layer (thickness of 2.13 nm) at the nanoscale. Their morphologies (spindle, rhomboid and round) and sizes (200 nm-2 μm) can be tuned gradually by changing BSA, AOT and calcium phosphate concentrations. This modulation effect can be explained by a competition between the anisotropic and isotropic assembly of the ultrathin plate-like units. The anisotropic assembly confers mesocrystal characteristics on the hybrids while the round ones are the results of isotropic assembly. However, the basic lamellar organic-inorganic substructure remains unchanged during the hybrid formation, which is a key factor to ensure the self-assembly from molecule to micrometre scale. A morphological ternary diagram of BSA-AOT-calcium phosphate is used to describe this controlled formation process, providing a feasible strategy to prepare the required materials. This study highlights the cooperative effect of macromolecule (frame structure), small biomolecule (binding sites) and mineral phase (main component) on the generation and regulation of biomimetic hybrid mesocrystals.

Monovalent cations trigger inverted bilayer formation of surfactant films

We monitored single-layer Langmuir-Blodgett films of behenic acid deposited on silanized glass or silicon substrates by atomic force microscopy (AFM) in liquid. We observed the in situ transformation of the monolayer to a bilayer when the surrounding solution was NaOH or KOH with pH > 8.3. The final state is that of an inverted bilayer, in which both the hydrophobic OTS (octadecyltrichlorosilane) and the alkane chains are exposed to the surrounding solution, defying common intuition based on hydrophobic-hydrophilic energy considerations. Strong sodium-containing carboxylic dimers formed between the headgroups are shown to be responsible for the stabilization of this configuration; calcium ions slow down/inhibit the transformation.

Binding of ethanol on calcite: the role of the OH bond and its relevance to biomineralization

The interaction of OH-containing compounds with calcite, CaCO(3), such as is required for the processes that control biomineralization, has been investigated in a low-water solution. We used ethanol (EtOH) as a simple, model, OH-containing organic compound, and observed the strength of its adsorption on calcite relative to OH from water and the consequences of the differences in interaction on crystal growth and dissolution. A combination of atomic force microscopy (AFM) and molecular dynamics (MD) simulations showed that EtOH attachment on calcite is stronger than HOH binding and that the first adsorbed layer of ethanol is highly ordered. The strong ordering of the ethanol molecules has important implications for mineral growth and dissolution because it produces a hydrophobic layer. Ethanol ordering is disturbed along steps and at defect sites, providing a bridge from the bulk solution to the surface. The strong influence of calcite in structuring ethanol extends further into the liquid than expected from electrical double-layer theory. This suggests that in fluids where water activity is low, such as in biological systems optimized for biomineralization, organic molecules can control ion transport to and from the mineral surface, confining it to specific locations, thus providing the organism with control for biomineral morphology.

Dopamine-induced mineralization of calcium carbonate vaterite microspheres

Two biogenic materials from mussels are attracting attention from scientists: calcium carbonate (CaCO(3)), the most widely studied biomineral that composes the shell, or nacre, of mussels, and dopamine, a small catechol-containing biomimetic molecule of adhesive foot proteins secreted by mussels. We have incorporated these two materials into the biomimetic mineralization process to produce stable vaterite microspheres, which are the most unstable crystalline phase of CaCO(3). Spherical vaterite crystals were readily formed within two minutes in the presence of dopamine undergoing polymerization and were preserved for over two months in aqueous solution. The microspheres consisted of nanoparticles smaller than 100 nm and exhibited porous and spherulitic cross sections. The prolonged maintenance of spherical structure is attributed to the affinitive interaction between calcium in the vaterite microspheres and catechols from dopamine retarding the dissolution of vaterite and the growth of calcite crystals. The mussel-inspired inducement of a stable vaterite phase suggests a facile route for the synthesis of complex organic-inorganic hybrid materials utilizing biogenic systems.

Effect of specific anion on templated crystal nucleation at the liquid-liquid interface

In this work, we have investigated the effect of potassium salts of different anions upon the crystal nucleation of K(2)SO(4) as interfacially templated by a surfactant monolayer of 1-octadecylamine (ODA), in an aqueous microdroplet system bounded by a liquid-liquid interface with 1-decanol. The salts used were K(2)HPO(4), KCl, KBr, KI, KNO(3), and KSCN, present at an initial concentration of 10 mM within an aqueous microdroplet containing K(2)SO(4) at an initial concentration of 287 mM. Supersaturation and subsequent crystallization were isothermally induced by droplet dissolution into the dehydrating decanol phase. The K(2)SO(4) solute crystallization behavior was studied by measurement of the calculated concentration of the solute in the microdroplet at the onset of crystallization, i.e., at the first perceptible microscopic appearance of a solid phase, and by crystal habit. Certain salts, e.g., K(2)HPO(4), had almost no influence on the templating ability of ODA, while the ability of ODA to template nucleation and direct the formation of regular crystal habit of K(2)SO(4) became appreciably disrupted in the presence of more chaotropic anions, such as SCN(-) or NO(3)(-). The propensity for anions to disrupt crystal templating was clearly seen to follow a Hofmeister trend. For crystallization events induced in the absence of ODA, however, these added salts had no influence on the outcome of the events. Microdroplets bounded by an ODA monolayer were also found to undergo droplet shrinkage into the surrounding dehydrating phase at a rate which generally depended upon the nature of the anion in the droplet, with chaotropic anions having an apparent effect of promoting shrinkage. Our findings suggest that the packing or ordering of an ODA monolayer at a liquid-liquid interface is strongly influenced by an interaction between anions in the aqueous phase and the surfactant monolayer at the liquid-liquid interface, which is manifested in its effect upon the crystal templating behavior. These intriguing results can have important implications for the understanding of biomineralization processes which occur in heterogeneous environments.

Biomimetic fabrication of pseudohexagonal aragonite tablets through a temperature-varying approach

Pseudohexagonal and single-crystal-like aragonite tablets, found in nacre, could be uniformly fabricated through a temperature-varying approach for the first time, indicating the triplet twinning nature and implying a potential significance in biomineralization.

Colloidal-crystal-assisted patterning of crystalline materials

Colloidal crystals have shown great potential as versatile templates for the fabrication of patterned micro- and nanostructures with complex architectures and novel properties. The patterning of functional crystalline materials in two and three dimensions is essential to the realization of their applications in many technologically important fields. This article highlights some recent progress in the fabrication of 2D and 3D patterned crystalline materials with the assistance of colloidal crystals. By combining a bioinspired synthetic strategy based on a transient amorphous phase with a colloidal-crystal templating method, unique 3D ordered macroporous (3DOM) calcite single crystals can be created. Moreover, patterned arrays of regular ZnO nanopillars with controlled size, shape, and orientation can be fabricated via a facile wet chemical approach by using masks derived from monolayer colloidal crystals (MCC).

Polymer-controlled crystallization of unique mineral superstructures

The origin of complex superstructures of biomaterials in biological systems and the amazing self-assembly mechanisms of their emergence have attracted a great deal of attention recently. Mimicking nature, diverse kinds of hydrophilic polymers with different functionalities and organic insoluble matrices have been designed for the morphogenesis of inorganic crystals. In this Research News, emerging new strategies for morphogenesis and controlled crystal growth of minerals, that is, selective adsorption and mesoscale transformation for highly ordered superstructures, the combination of a synthetic hydrophilic polymer with an insoluble matrix, a substrate, or the air/solution interface, and controlled crystallization in a mixed solvent are highlighted. It is shown that these new strategies can be even further extended to morphogenesis and controlled crystallization of diverse inorganic or inorganic-organic hybrid materials with structural complexity, structural specialties, and improved functionalities.

Visualizing the 3D Internal Structure of Calcite Single Crystals Grown in Agarose Hydrogels

Single crystals are usually faceted solids with homogeneous chemical compositions. Biogenic and synthetic calcite single crystals, however, have been found to incorporate macromolecules, spurring investigations of how large molecules are distributed within the crystals without substantially disrupting the crystalline lattice. Here, electron tomography reveals how random, three-dimensional networks of agarose nanofibers are incorporated into single crystals of synthetic calcite by allowing both high- and low-energy fiber/crystal interface facets to satisfy network curvatures. These results suggest that physical entrapment of polymer aggregates is a viable mechanism by which macromolecules can become incorporated inside inorganic single crystals. As such, this work has implications for understanding the structure and formation of biominerals as well as toward the development of new high–surface area, single-crystal composite materials.

Crystallization of synthetic haemozoin (beta-haematin) nucleated at the surface of lipid particles

The mechanism of formation of haemozoin, a detoxification by-product of several blood-feeding organisms including malaria parasites, has been a subject of debate; however, recent studies suggest that neutral lipids may serve as a catalyst. In this study, a model system consisting of an emulsion of neutral lipid particles was employed to investigate the formation of beta-haematin, the synthetic counterpart of haemozoin, at the lipid-water interface. A solution of monoglyceride, either monostearoylglycerol (MSG) or monopalmitoylglycerol (MPG), dissolved in acetone and methanol was introduced to an aqueous surface. Fluorescence, confocal and transmission electron microscopic (TEM) imaging and dynamic light scattering analysis of samples obtained from beneath the surface confirmed the presence of homogeneous lipid particles existing in two major populations: one in the low micrometre size range and the other in the hundred nanometre range. The introduction of haem (Fe(iii)PPIX) to this lipid particle system under biomimetic conditions (37 degrees C, pH 4.8) produced beta-haematin with apparent first-order kinetics and an average half life of 0.5 min. TEM of monoglycerides (MSG or MPG) extruded through a 200 nm filter with haem produced beta-haematin crystals aligned and parallel to the lipid-water interface. These TEM data, together with a model system replacing the lipid with an aqueous organic solvent interface using either methyl laurate or docosane demonstrated that the OH and C[double bond, length as m-dash]O groups are apparently necessary for efficient nucleation. This suggests that beta-haematin crystallizes via epitaxial nucleation at the lipid-water interface through interaction of Fe(iii)PPIX with the polar head group. Once nucleated, the crystal grows parallel to the interface until growth is terminated by the curvature of the lipid particle. The hydrophobic nature of the mature crystal favours an interior transport resulting in crystals aligned parallel to the lipid-water interface and each other, strikingly similar to that seen in malaria parasites.

The initial stages of template-controlled CaCO3 formation revealed by cryo-TEM

Biogenic calcium carbonate forms the inorganic component of seashells, otoliths, and many marine skeletons, and its formation is directed by an ordered template of macromolecules. Classical nucleation theory considers crystal formation to occur from a critical nucleus formed by the assembly of ions from solution. Using cryotransmission electron microscopy, we found that template-directed calcium carbonate formation starts with the formation of prenucleation clusters. Their aggregation leads to the nucleation of amorphous nanoparticles in solution. These nanoparticles assemble at the template and, after reaching a critical size, develop dynamic crystalline domains, one of which is selectively stabilized by the template. Our findings have implications for template-directed mineral formation in biological as well as in synthetic systems.