Soy protein nanoparticle aggregates as pickering stabilizers for oil-in-water emulsions

Emulsions stabilized by soy protein nanoparticles as potential functional non-dairy yogurts

BACKGROUND

Rice bran oil and soy protein nanoparticles (SPNs) may be considered as novel functional food ingredients for soy yogurt production. Formulation of soy yogurt with SPNs and rice bran oil, which has significant physiological functions, will convert them into functional food products. This study was conducted to develop rice bran oil-based soy protein nanoparticles emulsion (SPNE) and to evaluate physical properties, antioxidant activities, oxidative stability and microbiological load as well as textural attributes of SPNs incorporated yogurt (SPNY) during storage at 4 °C for 45 days.

RESULTS

SPNs were prepared from soy protein isolate of defatted soy flour. Solubilization, crystallization and ultrasonication was carried out six times. After the sixth cycle of repeated solubilizing, crystallization and ultrasonication, the size of nano protein was reduced to 72.42 ± 0.22 nm from 586.72 ± 0.75 nm (after first cycle). Viscosity, penetration values and water-holding capacity of SPNs added to yogurt were decreased with increase in reduction size of SPNs. SPNs added to yogurt exhibited greater antiradical scavenging ability and ferric reducing antioxidant property than control yogurt. Fortified soy yogurt had significant higher oxidative stability and proteolytic activity.

CONCLUSION

Fortification of non-dairy food products with SPNs, which has significant physiological functions, convert conventional soy yogurt into functional food products. © 2019 Society of Chemical Industry.

Composition, physicochemical properties of pea protein and its application in functional foods

Field pea is one of the most important leguminous crops over the world. Pea protein is a relatively new type of plant proteins and has been used as a functional ingredient in global food industry. Pea protein includes four major classes (globulin, albumin, prolamin, and glutelin), in which globulin and albumin are major storage proteins in pea seeds. Globulin is soluble in salt solutions and can be further classified into legumin and vicilin. Albumin is soluble in water and regarded as metabolic and enzymatic proteins with cytosolic functions. Pea protein has a well-balanced amino acid profile with high level of lysine. The composition and structure of pea protein, as well as the processing conditions, significantly affect its physical and chemical properties, such as hydration, rheological characteristics, and surface characteristics. With its availability, low cost, nutritional values and health benefits, pea protein can be used as a novel and effective alternative to substitute for soybean or animal proteins in functional food applications.

Effect of the Solid Fat Content on Properties of Emulsion Gels and Stability of β-Carotene

Whey-protein-isolate-based emulsion gels were prepared through a cold-set gelation process, and the effect of the solid fat (coconut oil) content in the oil phase on gel properties and β-carotene stability was investigated. An increase in solid fat content (0, 20, 50, 80, and 100% of the oil phase) resulted in a smaller droplet size, higher viscosity, and improved creaming stability of the emulsions. When glucono-δ-lactone was added to initiate gelation, a higher solid fat content contributed to an earlier onset of gelation and a higher storage modulus of the gels. Textural analysis indicated that the increase in the solid fat content allowed for an increase in fracture stress and Young's modulus of the emulsion gels. Microscopic observation revealed that emulsions containing a higher solid fat content formed gels with a denser and more uniform particulate network structure. The stability of β-carotene against thermal treatment (55 °C for 12 days) and ultraviolet light exposure (8 h) was determined. The results suggested that the solidification of the oil phase can improve the stability of β-carotene, and gels with higher hardness were capable of retaining more β-carotene after the treatments. These findings indicated that emulsion gels with a solidified oil phase could be potential delivery systems for lipophilic bioactive compounds.

Inhibition of oil digestion in Pickering emulsions stabilized by oxidized cellulose nanofibrils for low-calorie food design

Celluloses are renewable and biodegradable natural resources. The application of celluloses as oil-in-water Pickering emulsifiers is still quite limited. In this paper, cellulose nanofibrils (CNFs) with oxidation degrees (DOs) of 52.8% and 92.7% (DO50 and DO90) were obtained from TEMPO-mediate oxidation for microcrystalline cellulose (MC). The production of carboxyl groups of CNFs were confirmed by FT-IR and 13C solid-NMR. CNF-stabilized O/W Pickering emulsion showed excellent colloidal stability compared with un-oxidized cellulose by Turbiscan stability analysis. Additionally, CNF-stabilized Pickering emulsions showed stable colloidal properties in simulated intestinal fluid (SIF). Most importantly, in vitro fatty acid release kinetics under SIF showed that CNFs have strong inhibitory lipid digestion behavior. Our results suggest that the oxidation modification not only improves their emulsification activity but also promotes their application in oil digestion inhibition, providing inspiration for designing and developing low-calorie food products.

SPI microgels applied to Pickering stabilization of O/W emulsions by ultrasound and high-pressure homogenization: rheology and spray drying

Soybean Protein Isolate (SPI) is a by-product from soybean oil industries with good nutritional and functional properties. Denaturation of hydrated SPI can change its properties, allowing the formation of gel-like particles, which can be used to stabilize emulsions without addition of surfactants. SPI microgel particles were produced by denaturation of hydrated SPI, followed by high pressure homogenization or sonication, with different NaCl or NaF contents, aiming the formation of small particles capable to stabilize O/W emulsions and acting as wall material for microencapsulation of soybean oil by spray drying. The presence of NaF in the suspensions decreased the charge intensity of SPI microgels, leading to formation of significantly bigger SPI microgel particles. Based on Creaming Index (CI), all the emulsions were stable for, at least, 21 days at room temperature. The presence of salt affected minimally the droplet size of the emulsions, though there has been an increase in flocculation. All the emulsions presented shear-thinning behavior and a strong shear rate dependence when salt was present in the system. The microspheres produced by spray drying of the emulsions were spherical and showed few aggregate formation. In addition, they presented high values of oil retention (> 80 wt%) and acceptable values of moisture content (< 4 wt%). SPI microgel particles produced by high-pressure homogenization or sonication may be used to stabilize emulsions with low oil contents. These emulsions can be further spray dried to microencapsulate lipophilic compounds using SPI microgels as wall material.

Microgel Particles at Interfaces: Phenomena, Principles, and Opportunities in Food Sciences

The use of soft microgel particles for stabilizing emulsions has captured increasing attention across a wide range of disciplines in the past decades. Being soft, the nanoparticles, which are spherical in solution, undergo a structure change when adsorbed at the oil-water interface. This morphology change leads to the special dynamic properties of interface layers and packing structures, which then alter the interfacial tension and rheological properties of the interface. In addition, emulsions stabilized by these particles, known as Pickering emulsions, can be triggered by changing a variety of environmental conditions, which is especially desirable in industrial applications such as oil transportation processes and biphasic catalysis, where the emulsions can be stabilized and destabilized on demand. Although many studies of the behavior of soft microgel nanoparticles at interfaces have been reported, there are still many challenges in gaining a full understanding of the structure, dynamics, and effective interactions between microgels at the interface. In this Feature Article, we address some of the most important findings and problems in the field. They include the adsorption kinetics of soft microgel particles, particle conformation at the interface, pH and thermal responsiveness, and the interfacial rheological properties of soft-particle-occupied interfaces. We also discuss some potential benefits of using emulsions stabilized by soft particles for food applications as an alternative to conventional surfactant-based systems. We hope to encourage further investigation of these problems, which would be very beneficial to extending this knowledge to all other related soft matter systems.

Solidification to improve the biopharmaceutical performance of SEDDS: Opportunities and challenges

Self-emulsifying drug delivery systems (SEDDS) offer potential for overcoming the inherent slow dissolution and poor oral absorption of hydrophobic drugs by retaining them in a solubilised state during gastrointestinal transit. However, the promising biopharmaceutical benefits of liquid lipid formulations has not translated into widespread commercial success, due to their susceptibility to long term storage and in vivo precipitation issues. One strategy that has emerged to overcome such limitations, is to combine the solubilisation and dissolution enhancing properties of lipids with the stabilising effects of solid carrier materials. The development of intelligent hybrid drug formulations has presented new opportunities to harness the potential of emulsified lipids in optimising oral bioavailability for lipophilic therapeutics. Specific emphasis of this review is placed on the impact of solidification approaches and excipients on the biopharmaceutical performance of self-emulsifying lipids, with findings highlighting the key design considerations that should be implemented when developing hybrid lipid-based formulations.

Fabrication and Characterization of Oleogel Stabilized by Gelatin-Polyphenol-Polysaccharides Nanocomplexes

The development of oleogel has attracted growing attention because of its health benefits and promising potential to substitute saturated or trans-fat. The present work reports a type of oleogel using the emulsion stabilized by gelatin (GLT), tannic acid (TA), and flaxseed gum (FG) complexes (GLT-TA-FG) through freeze-drying and oven-drying. Results showed that the incorporation of TA and FG promoted the formation of nanoparticles, resulting in increased charge quantity and reduced oil-water surface tension. The structural integrity of oleogel largely depends on the drying method, FG incorporation, and TA concentration. It was demonstrated that with oven drying, stable oleogel without oil leakage could only be fabricated in the presence of FG. The GLT-0.075 wt % TA-FG complexes formed a particle shell around the oil droplet, leading to the enhanced gel strength of the oleogel. In addition, the oleogel stabilized by GLT-TA-FG complexes had high thixotropic recovery degree and rehydration ability, implying the stabilizing effect of TA and FG. Therefore, the interfacially adsorbed particles and the polymer gel network in bulk together contributed to the compact structure of oleogel. We believe that the oleogel based on GLT-TA-FG complexes has potential applications in food products with tunable rheological and textural properties.

Enhancing the Viability of Lactobacillus plantarum as Probiotics through Encapsulation with High Internal Phase Emulsions Stabilized with Whey Protein Isolate Microgels

Probiotics with positive physiological effects on intestinal microflora populations of the host are popular in functional foods. Low relative humidity (RH) and temperature are beneficial for probiotic survival. In the present study, freeze-dried Lactobacillus plantarum powder, representative of probiotics, was encapsulated in the high internal phase emulsions (HIPEs) stabilized with whey protein isolate (WPI) microgels, to avoid the contact of water. Homogeneously dispersed WPI microgels with particle sizes around 300 nm were formed through thermal treatment of WPI solution. The particle size of the microgels decreased with the elevation of protein concentrations as well as the departure of pH values from the isoelectric point of the protein. When internal oil phase volume fractions were higher than 80% (w/w), WPI microgels with concentrations higher than 4.0 wt %, prepared at pH 4.0, 6.0, and 7.0 conditions, could stabilize the oil to form homogeneous HIPEs with tilting stability. The HIPEs thus formed had a cellular and tunable pore structure that could resist mechanical perturbation. Encapsulation of L. plantarum within HIPEs successfully increased the cell viability after pasteurization processing. The protective effect was even improved with the elevation of the oil volume fraction and increase of WPI microgel concentrations. Under different pH conditions, the strongest protective effect appeared at pH 4.0, when the WPI microgels accumulated on the oil droplet surface. When the large amount of oil and the protein microgel layer on the oil-water interface were combined as two specialties, the HIPEs were demonstrated to have high potential for enhancing the viability of probiotics during food thermal processing.

Ovalbumin as an Outstanding Pickering Nanostabilizer for High Internal Phase Emulsions

There is still a debate about the effectiveness of native globular proteins to perform as Pickering-like stabilizers for oil-in-water high internal phase emulsions (HIPEs). In the work, we report one native globular protein (ovalbumin) with strong structural integrity and high refolding ability, exhibits an outstanding Pickering stabilization for HIPEs. Ultrastable gel-like HIPEs can be formed through a facile one-pot homogenization even at a concentration as low as 0.2 wt %. The HIPEs formed in the protein-poor regime are a kind of self-supporting and remoldable hydrogel consisting of bridging droplets. The formed HIPEs also exhibit other unique characteristics, such as extraordinary coalescence stability (against prolonged storage or heating), susceptibility to freeze-thawing, enhanced oxidation stability (to encapsulated bioactives), and inhibited vaporization of volatile oils. The findings would be of importance for extending the HIPEs to be applied in food, cosmetic, and petroleum industries.

Effect of heat treatments on the structure and emulsifying properties of protein isolates from cumin seeds ( Cuminum cyminum)

The effect of heat treatments (65, 75, 85, and 95 ℃, 30 min) on the structure and the emulsifying properties of cumin protein isolates were investigated. The fluorescence spectra analysis showed that the conformations were remarkably influenced by heat treatments. An increase in the ratio of α-helix in the secondary structure of heated cumin protein isolates was observed from the result of circular dichroism. Thermal treatments at different temperatures led to an increase in the surface hydrophobicity ( H_o) and a decrease in zeta potential ( ζ) of cumin protein isolates. Emulsifying activity index and emulsion stability index of heated cumin protein isolates were reduced at different protein concentrations (0.1, 0.5, and 1.0%), while the protein absorption in emulsions stabilized by heated cumin protein isolates gradually increased with heating temperature increasing. Moreover, both emulsions stabilized by native and heated cumin protein isolates showed pseudo-plastic fluid behavior and exhibited a decrease in their viscosities with proteins concentration increasing. But thermal treatments produced different effects on the flow behavior of emulsions formed by various protein concentrations, the flow index for heated cumin protein isolates emulsions increased at protein concentrations of 0.5 and 1.0%, but decreased at a concentration of 0.1%. These results might provide reference for the cumin protein processing and its application in food industry.

Protein Based Nanostructures for Drug Delivery

The key role of protein based nanostructures has recently revolutionized the nanomedicine era. Protein nanoparticles have turned out to be the major grounds for the transformation of different properties of many conventional materials by virtue of their size and greater surface area which instigates them to be more reactive to some other molecules. Protein nanoparticles have better biocompatibilities and biodegradability and also have the possibilities for surface modifications. These nanostructures can be synthesized by using protein like albumin, gelatin, whey protein, gliadin, legumin, elastin, zein, soy protein, and milk protein. The techniques for their fabrication include emulsification, desolvation, complex coacervation, and electrospray. The characterization parameters of protein nanoparticles comprise particle size, particle morphology, surface charge, drug loading, determination of drug entrapment, and particle structure and in vitro drug release. A plethora of protein nanoparticles applications via different routes of administration are explored and reported by eminent researchers which are highlighted in the present review along with the patents granted for protein nanoparticles as drug delivery carriers.

Joint Effects of Granule Size and Degree of Substitution on Octenylsuccinated Sweet Potato Starch Granules As Pickering Emulsion Stabilizers

The granules of sweet potato starch were size fractionated into three portions with significantly different median diameters ( D₅₀) of 6.67 (small-sized), 11.54 (medium-sized), and 16.96 μm (large-sized), respectively. Each portion was hydrophobized at the mass-based degrees of substitution (DS_m) of approximately 0.0095 (low), 0.0160 (medium), and 0.0230 (high). The Pickering emulsion-stabilizing capacities of modified granules were tested, and the resultant emulsions were characterized. The joint effects of granule size and DS_m on emulsifying capacity (EC) were investigated by response surface methodology. For small-, medium-, and large-sized fractions, their highest emulsifying capacities are comparable but, respectively, encountered at high (0.0225), medium (0.0158), and low (0.0095) DS_m levels. The emulsion droplet size increased with granule size, and the number of freely scattered granules in emulsions decreased with DS_m. In addition, the term of surface density of the octenyl succinic group (SD_-OSG) was first proposed for modified starch granules, and it was proved better than DS_m in interpreting the emulsifying capacities of starch granules with varying sizes. The present results implied that, as the particulate stabilizers, the optimal DS_m of modified starch granules is size specific.

Molecularly imprinted polymers fabricated via Pickering emulsions stabilized solely by food-grade casein colloidal nanoparticles for selective protein recognition

Novel molecularly imprinted polymers (MIPs) based on denatured casein nanoparticle (DCP)-stabilized Pickering emulsions were developed for the first time. Casein, a phosphoprotein, is the main protein in milk. In this work, DCPs were solely used as Pickering-type interfacial emulsifiers for fabrication of MIPs for the selective recognition of proteins for the first time. DCPs were prepared by acidification and heat denaturation (at 80 °C) of casein. Their dispersions have satisfactory colloidal stability over a wide pH range. The DCPs acted as natural, food-grade, and edible interfacial emulsifiers, and adsorbed at the oil-water interface to form Pickering emulsions. After the polymerization of monomers, the template protein was removed by elution. During the elution, the interfacial DCPs were also removed, allowing more imprinted cavities to become exposed. The interfacial imprinting technology causes nearly all the imprinted sites to locate on the surface of the polymeric material. Therefore, the MIPs obtained exhibit fast rebinding and excellent specific recognition ability toward the analytes. Overall, this work provides a promising method for designing and fabricating natural-protein-based structured emulsions to prepare MIPs and thus offers new insight into protein separation and purification. Graphical Abstract Pickering emulsions stabilized by denatured casein particles.

Preparation, characterisation and antioxidant activities of rutin-loaded zein-sodium caseinate nanoparticles

Novel rutin-loaded zein-sodium caseinate nanoparticles (ZP) with antioxidant activity in aqueous medium were investigated. The results showed that the sodium caseinate concentrations, dosages of rutin and ethanol volume fractions significantly affected the zein nanoparticles’ characteristics. Concerning the antioxidant properties, the highest values of rutin loaded ZP obtained using 2, 2-diphenyl-1-picrylhydrazyl scavenging and 2 and 2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) decolourisation assays were 52.7% and 71.2%, respectively, and the total antioxidant capacity was 0.40 nmol g^-1. The results suggest that zein-sodium caseinate nanoparticles can be used as a new nano carrier system for rutin or other water insoluble active ingredients.

Oseltamivir phosphate released from injectable Pickering emulsions over an extended term disables human pancreatic cancer cell survival

Pickering emulsions are colloidal dispersions stabilized by particles that either migrate to, or are formed at, the oil-water interface during emulsification. Here, we fabricated and characterized Pickering water-in-oil emulsions where molten glycerol monostearate crystallized at the surface of micron-sized water droplets and formed protective solid shells. We tested this emulsion as a reservoir delivery platform for the sustained release of low molecular weight hydrophilic molecules including sodium chloride (NaCl) and sodium citrate as model compounds, and the therapeutic oseltamivir phosphate (OP), the delivery of which was the ultimate goal of this research. The objective was to achieve long-term (30-day) release of challenging to encapsulate actives and ultimately demonstrate the sustained release of OP for 20–30 days from an injectable formulation. OP was used because of its anticancer properties targeting mammalian neuraminidase 1 (Neu1) involved in multistage tumorigenesis. All actives including OP encapsulated in Pickering emulsions displayed a near linear release profile over 30 days. It was demonstrated that the release could be modulated by the addition of a second, competing surfactant sorbitan monooleate, Span 80, to the emulsion at levels above its critical micelle concentration. OP released from the emulsions significantly reduced cell viability in the human PANC-1 pancreatic cancer cell line for up to 30 days. The findings from this study indicate a simple, potentially injectable formulation and method that is easily upscaled resulting in a stable product with the potential to fully retain small hydrophilic molecules/drugs for sustained, near linear release over days, weeks, and potentially months.