Mechanochemical Activation of Covalent Bonds in Polymers with Full and Repeatable Macroscopic Shape Recovery

Effect of Polymer Grafting Density on Mechanophore Activation at Heterointerfaces

Silica nanoparticles grafted with poly(methyl acrylate) chains whose anchor points are maleimide-anthracene cycloadducts were prepared at various grafting densities to demonstrate fundamental characteristics of mechanophore activation at heterointerfaces. The monotonically decreasing correlation between polymer grafting density and surface-bound maleimide-anthracene mechanophore activation was quantitatively elucidated and discussed. Presumably as a result of polymer-polymer interactions, polymer grafting density plays a significant role in heterogeneous mechanophore activation. The findings are a valuable guide in the design of efficient force-sensitive, damage-reporting polymer composites, where damage is often localized to the interface between the matrix and the reinforcing phase.

Is Molecular Weight or Degree of Polymerization a Better Descriptor of Ultrasound-Induced Mechanochemical Transduction?

A detailed understanding of the fundamental processes that govern mechanical transduction in covalent polymer mechanochemistry is essential to advance innovation in this field. In contrast to progress in the development of new mechanophores, the influence of polymer structure and composition on mechanochemical activity has received relatively little attention. In order to address this gap in knowledge, a continuous flow system with synchronous UV-vis absorption capabilities was designed to quantify the ultrasound-induced mechanical activation of a spiropyran mechanophore in real-time. Measurements of reaction kinetics with polymer tethers of varying repeating unit structure demonstrate that degree of polymerization is the key descriptor of mechanochemical activity, independent of molecular weight and pendant group constitution. These results have important implications for the rationalization of mechanochemical properties and the design of new mechanochemically active polymer systems.

Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials

The possibility to change the molecular assembled structures of organic and organometallic materials through mechanical stimulation is emerging as a general and powerful concept for the design of functional materials. In particular, the photophysical properties such as photoluminescence color, quantum yield, and emission lifetime of organic and organometallic fluorophores can significantly depend on the molecular packing, enabling the development of molecular materials with mechanoresponsive luminescence characteristics. Indeed, an increasing number of studies have shown in recent years that mechanical force can be utilized to change the molecular arrangement, and thereby the optical response, of luminescent molecular assemblies of π-conjugated organic or organometallic molecules. Here, the development of such mechanoresponsive luminescent (MRL) molecular assemblies consisting of organic or organometallic molecules is reviewed and emerging trends in this research field are summarized. After a brief introduction of mechanoresponsive luminescence observed in molecular assemblies, the concept of "luminescent molecular domino" is introduced, before molecular materials that show turn-on/off of photoluminescence in response to mechanical stimulation are reviewed. Mechanically stimulated multicolor changes and water-soluble MRL materials are also highlighted and approaches that combine the concept of MRL molecular assemblies with other materials types are presented in the last part of this progress report.

π-extended anthracenes as sensitive probes for mechanical stress

Smart molecular systems having the ability to report on mechanical strain or failure in polymers via alteration of their optical properties are of great interest in materials science. However, only limited attention has been devoted to targeted chromophore engineering to fine-tune their physicochemical properties. Here, we describe the synthesis of π-extended anthracenes that can be released from their respective maleimide Diels-Alder adducts through the application of mechanical stress in solution and in the solid state. We demonstrate the improvement of fluorescence quantum yield as well as the tuning of excitation and emission wavelengths while retaining their excellent mechanochemical properties laying the foundation for a new series of mechanophores whose spectral characteristics can be modularly adjusted.

Stress-sensing thermoset polymer networks via grafted cinnamoyl/cyclobutane mechanophore units in epoxy

A study of novel direct covalent grafting of photoactive mechanophore units into an epoxy matrix to create self-sensing thermoset network nanocomposites.

Mechanochromic Dynamic Covalent Elastomers: Quantitative Stress Evaluation and Autonomous Recovery

Stress evaluation in polymeric materials is important in order to not only spot danger in them before serious failure, but also precisely interpret the destructive mechanism, which can improve the lifetime and durability of polymeric materials. Here, we are able to visualize stress by color changes, as well as quantitatively estimate the stress in situ, in segmented polyurethane elastomers with diarylbibenzofuranone-based dynamic covalent mechanophores. We prepared films of the segmented polyurethanes, in which the mechanophores were incorporated in the soft segments, and efficiently activated them by mechanical force. Cleavage of the mechanophores during uniaxial elongation and their recovery after the removal of the stress were quantitatively evaluated by in situ electron paramagnetic resonance measurements, accompanied by drastic color changes.

Mechanochemically Active Soft Robots

The functions of soft robotics are intimately tied to their form-channels and voids defined by an elastomeric superstructure that reversibly stores and releases mechanical energy to change shape, grip objects, and achieve complex motions. Here, we demonstrate that covalent polymer mechanochemistry provides a viable mechanism to convert the same mechanical potential energy used for actuation in soft robots into a mechanochromic, covalent chemical response. A bis-alkene functionalized spiropyran (SP) mechanophore is cured into a molded poly(dimethylsiloxane) (PDMS) soft robot walker and gripper. The stresses and strains necessary for SP activation are compatible with soft robot function. The color change associated with actuation suggests opportunities for not only new color changing or camouflaging strategies, but also the possibility for simultaneous activation of latent chemistry (e.g., release of small molecules, change in mechanical properties, activation of catalysts, etc.) in soft robots. In addition, mechanochromic stress mapping in a functional robotic device might provide a useful design and optimization tool, revealing spatial and temporal force evolution within the robot in a way that might be coupled to autonomous feedback loops that allow the robot to regulate its own activity. The demonstration motivates the simultaneous development of new combinations of mechanophores, materials, and soft, active devices for enhanced functionality.

Visualization of Polymer Deformation Using Microcapsules Filled with Charge-Transfer Complex Precursors

The visualization of polymer deformation using microcapsules filled with charge-transfer complex precursors is reported. Poly(urea-formaldehyde) microcapsules filled with toluene and either hexamethylbenzene as donor or chloranil as acceptor were prepared by in situ polymerization of an oil-in-water emulsion. The resulting microcapsules were incorporated in a poly(dimethylsiloxane) matrix by dispersing them in the monomer and subsequent curing. The microcapsules were shown to rupture when the polymer was placed under mechanical forces (i.e., tensile and compression) such that the donor and the acceptor are released into the polymeric matrix, where their combination to a charge-transfer complex results in a pronounced yellow-to-red color change. The factors influencing the extent of the color change (composition and mechanical strain) were investigated and a deformation threshold seems to be present. The new damage-sensing materials may be useful for a range of applications and the general concept applied seems to be readily applicable to other host polymers.

Magnetic Field Triggered Multicycle Damage Sensing and Self Healing

Multifunctional materials inspired by biological structures have attracted great interest, e.g. for wearable/ flexible "skin" and smart coatings. A current challenge in this area is to develop an artificial material which mimics biological skin by simultaneously displaying color change on damage as well as self healing of the damaged region. Here we report, for the first time, the development of a damage sensing and self healing magnet-polymer composite (Magpol), which actively responds to an external magnetic field. We incorporated reversible sensing using mechanochromic molecules in a shape memory thermoplastic matrix. Exposure to an alternating magnetic field (AMF) triggers shape recovery and facilitates damage repair. Magpol exhibited a linear strain response upto 150% strain and complete recovery after healing. We have demonstrated the use of this concept in a reusable biomedical device i.e., coated guidewires. Our findings offer a new synergistic method to bestow multifunctionality for applications ranging from medical device coatings to adaptive wing structures.

Mechanochemical Strengthening of a Multi-mechanophore Benzocyclobutene Polymer

The mechanical stresses that materials experience during use can lead to aging and failure. Recent developments in covalent mechanochemistry have provided a mechanism by which those stresses can be channeled into constructive, rather than destructive, responses, including strengthening in materials. Here, the synthesis and mechanical response of a polymer containing multiple benzocyclobutene (BCB) mechanophores along its backbone are reported. When solutions of the BCB polymer were exposed to the normally destructive elongational flow forces generated by pulsed ultrasonication, the number of intermolecular bond-forming reactions was greater than the number of bond-breaking reactions, leading to a net increase in polymer molecular weight. The molecular weight increase could be turned into gelation by introducing a bismaleimide cross-linker that reacts with the ortho-quinodimethide intermediate generated by mechanically assisted ring opening of the BCB mechanophores and using polymer concentrations in excess of the critical overlap concentration. Unlike a previous mechanically induced gelation of a mechanophore-based polymer, the BCB cross-linking requires no ionic components and represents an attractive, second platform for stress-strengthening materials.

Polymer mechanochemistry: from destructive to productive

When one brings "polymeric materials" and "mechanical action" into the same conversation, the topic of this discussion might naturally focus on everyday circumstances such as failure of fibers, fatigue of composites, abrasion of coatings, etc. This intuitive viewpoint reflects the historic consensus in both academia and industry that mechanically induced chemical changes are destructive, leading to polymer degradation that limits materials lifetime on both macroscopic and molecular levels. In the 1930s, Staudinger observed mechanical degradation of polymers, and Melville later discovered that polymer chain scission caused the degradation. Inspired by these historical observations, we sought to redirect the destructive mechanical energy to a productive form that enables mechanoresponsive functions. In this Account, we provide a personal perspective on the origin, barriers, developments, and key advancements of polymer mechanochemistry. We revisit the seminal events that offered molecular-level insights into the mechanochemical behavior of polymers and influenced our thinking. We also highlight the milestones achieved by our group along with the contributions from key comrades at the frontier of this field. We present a workflow for the design, evaluation, and development of new "mechanophores", a term that has come to mean a molecular unit that chemically responds in a selective manner to a mechanical perturbation. We discuss the significance of computation in identifying pairs of points on the mechanophore that promote stretch-induced activation. Attaching polymer chains to the mechanophore at the most sensitive pair and locating the mechanophore near the center of a linear polymer are thought to maximize the efficiency of mechanical-to-chemical energy transduction. We also emphasize the importance of control experiments to validate mechanochemical transformations, both in solution and in the solid state, to differentiate "mechanical" from "thermal" activation. This Account offers our first-hand perspective of the change-in-thinking in polymer mechanochemistry from "destructive" to "productive" and looks at future advances that will stimulate this growing field.

Polymeric materials that convert local fleeting signals into global macroscopic responses

We report a general design strategy for creating polymeric materials that are capable of providing global, macroscopic changes in their properties in response to specific local and fleeting stimuli. In a proof-of-concept demonstration, a single polymer is used, yet it enables selective responses to specific stimuli, and then internally drives a macroscopic change in the material (even in locations not exposed to the stimulus), where the magnitude of change is independent of the intensity of the applied stimulus.

Molecular engineering of mechanophore activity for stress-responsive polymeric materials

Force reactive functional groups, or mechanophores, have emerged as the basis of a potential strategy for sensing and countering stress-induced material failure. The general utility of this strategy is limited, however, because the levels of mechanophore activation in the bulk are typically low and observed only under large, typically irreversible strains. Strategies that enhance activation are therefore quite useful. Molecular-level design principles by which to engineer enhanced mechanophore activity are reviewed, with an emphasis on quantitative structure-activity studies determined for a family of gem-dihalocyclopropane mechanophores.

Surface confined retro Diels-Alder reaction driven by the swelling of weak polyelectrolytes

Recently, the type of reactions driven by mechanical force has increased significantly; however, the number of methods for activating those mechanochemical reactions stays relatively limited. Furthermore, in situ characterization of a reaction is usually hampered by the inherent properties of conventional methods. In this study, we report a new platform that utilizes mechanical force generated by the swelling of surface tethered weak polyelectrolytes. An initiator with Diels-Alder (DA) adduct structure was applied to prepare the polyelectrolyte-carboxylated poly(OEGMA-r-HEMA), so that the force could trigger the retro DA reaction. The reaction was monitored in real time by quartz crystal microbalance and confirmed with atomic force microscopy and X-ray photoelectron spectroscopy. Compared with the conventional heating method, the swelling-induced retro DA reaction proceeded rapidly with high conversion ratio and selectivity. A 23.61 kcal/mol theoretical energy barrier supported the practicability of this retro DA reaction being triggered mechanically at ambient temperature. During swelling, the tensile force was controllable and persistent. This unique feature imparts this mechanochemical platform the potential to "freeze" an intermediate state of a reaction for in situ spectroscopic observations, such as surface-enhanced Raman spectroscopy and frequency generation spectroscopy.

3D-printed mechanochromic materials

We describe the preparation and characterization of photo- and mechanochromic 3D-printed structures using a commercial fused filament fabrication printer. Three spiropyran-containing poly(ε-caprolactone) (PCL) polymers were each filamentized and used to print single- and multicomponent tensile testing specimens that would be difficult, if not impossible, to prepare using traditional manufacturing techniques. It was determined that the filament production and printing process did not degrade the spiropyran units or polymer chains and that the mechanical properties of the specimens prepared with the custom filament were in good agreement with those from commercial PCL filament. In addition to printing photochromic and dual photo- and mechanochromic PCL materials, we also prepare PCL containing a spiropyran unit that is selectively activated by mechanical impetus. Multicomponent specimens containing two different responsive spiropyrans enabled selective activation of different regions within the specimen depending on the stimulus applied to the material. By taking advantage of the unique capabilities of 3D printing, we also demonstrate rapid modification of a prototype force sensor that enables the assessment of peak load by simple visual assessment of mechanochromism.

High molecular weight mechanochromic spiropyran main chain copolymers via reproducible microwave-assisted Suzuki polycondensation

Mechanochromic spiropyran main chain copolymers with high and reproducible molar mass can be made using microwave-assisted Suzuki–Miyaura polycondensation.

Mechanochemical Reactions Reporting and Repairing Bond Scission in Polymers

The past 10 years have seen a resurgence of interest in the field of polymer mechanochemistry. Whilst the destructive effects of mechanical force on polymer chains have been known for decades, it was only recently that researchers tapped into these forces to realize more useful chemical transformations. The current review discusses the strategic incorporation of weak covalent bonds in polymers to create materials with stress-sensing and damage-repairing properties. Firstly, the development of mechanochromism and mechanoluminescence as stress reporters is considered. The second half focuses on the net formation of covalent bonds as a response to mechanical force, via mechanocatalysis and mechanically unmasked chemical reactivity, and concludes with perspectives for the field.

Mechanophore activation at heterointerfaces

Silica nanoparticles grafted with poly(methyl acrylate) (PMA) chains anchored by a maleimide-anthracene cycloadduct were synthesized to demonstrate mechanochemically selective activation of mechanophores at heterogeneous interfaces. By quantifying the anthracene-containing cleaved PMA polymers, which are generated via retro-[4 + 2] cycloaddition reactions, the first-order kinetic coefficient was determined. Activation characteristics of mechanophores anchored to a nanoparticle exhibit behavior similar to mechanophore-linked polymers, e.g., threshold molecular weight and linear increase in rate coefficient with molecular weight above the threshold. This model system is thus valuable as a probe to test stress activation of interfacially bonded mechanophores relevant to the design of fiber-reinforced polymer composites.

Cephalopod-inspired design of electro-mechano-chemically responsive elastomers for on-demand fluorescent patterning

Cephalopods can display dazzling patterns of colours by selectively contracting muscles to reversibly activate chromatophores--pigment-containing cells under their skins. Inspired by this novel colouring strategy found in nature, we design an electro-mechano-chemically responsive elastomer system that can exhibit a wide variety of fluorescent patterns under the control of electric fields. We covalently couple a stretchable elastomer with mechanochromic molecules, which emit strong fluorescent signals if sufficiently deformed. We then use electric fields to induce various patterns of large deformation on the elastomer surface, which displays versatile fluorescent patterns including lines, circles and letters on demand. Theoretical models are further constructed to predict the electrically induced fluorescent patterns and to guide the design of this class of elastomers and devices. The material and method open promising avenues for creating flexible devices in soft/wet environments that combine deformation, colorimetric and fluorescent response with topological and chemical changes in response to a single remote signal.

Comparison of Mechanochemical Chain Scission Rates for Linear versus Three-Arm Star Polymers in Strong Acoustic Fields

The effect of star versus linear polymer architecture on the rates of mechanochemically induced bond scission has been explored. We determined rate constants for chain scission of parent linear and star polymers, from which daughter fragments were cleanly resolved. These studies confirm a mechanistic interpretation of star polymer chain scission that is governed by the spanning rather than total molecular weight. We further demonstrate the preserved rate of site-selective mechanophore activation across two different polymer structures. Specifically, we observed consistent activation rate constants from three-arm star and linear polymer analogues, despite the M_n of the star polymer being 1.5 times greater than that of the linear system.

Mechanochemistry with metallosupramolecular polymers

The transduction of mechanical force into useful chemical reactions is an emerging design approach to impart soft materials with new functions. Here, we report that mechanochemical transductions can be achieved in metallosupramolecular polymers. We show that both reversible and irreversible reactions are possible and useful to create mechanically responsive materials that display new functions. The metallopolymer studied was a cross-linked network assembled from a europium salt and a telechelic poly(ethylene-co-butylene) with 2,6-bis(1'-methylbenzimidazolyl)pyridine (Mebip) ligands at the termini. The Eu(3+) complexes serve both as mechanically responsive binding motifs and as built-in optical probes that can monitor the extent of (dis)assembly due to their characteristic photoluminescent properties. Indeed, dose-dependent and reversible metal-ligand dissociation occurs upon exposure to ultrasound in solution. The absence of ultrasound-induced dissociation of a low-molecular weight model complex and in-depth studies of temperature effects confirm that the dissociation is indeed the result of mechanical activation. The influence of the strength of the metal-ligand interactions on the mechanically induced dissociation was also explored. Metallopolymers in which the Mebip ligands were substituted with more strongly coordinating dipicolinate (dpa) ligands do not dissociate upon exposure to ultrasound. Finally, we show that mechanochemical transduction in metallosupramolecular polymers is also possible in the solid state. We demonstrate mending of damaged objects through ultrasound as well as mechanochromic behavior based on metal-exchange reactions in metallopolymers imbibed with an auxiliary metal salt.

Interplay Between Mechanochemistry and Sonochemistry

Ultrasonic irradiation-based mechanochemical strategies have recently been the subject of intensive investigation because of the advantages they offer. These include simplicity, energy savings and wide applicability. Traditional areas of sonoprocessing such as cleaning, efficient mixing and solid activation have been extended to both macromolecular and micro/nanostructures, some of which are biologically significant, ultrasound-responsive actuators and crystal design, among others. Unlike conventional mechanochemical protocols, which require little solvent usage if any at all, mechanical (and chemical) effects promoted by ultrasound are observed in a liquid medium. Tensile forces, which share similarities with solid mechanochemistry, are generated by virtue of nonlinear effects, notably cavitation, when high-amplitude waves propagate in a fluid. This work aims to provide insight into some recent developments in the multifaceted field of sono-mechanochemistry using various examples that illustrate the role of ultrasonic activation, which is capable of boosting hitherto sterile transformations and inventing new crafts in applied chemistry. After a preliminary discussion of acoustics, which is intended to provide a mechanistic background, we mainly focus on experimental developments, while we often mention emerging science and occasionally delve into theoretical models and force simulations.

Mechanochemistry of Topological Complex Polymer Systems

Although existing since the concept of macromolecules, polymer mechanochemistry is a burgeoning field which attracts great scientific interest in its ability to bias conventional reaction pathways and its potential to fabricate mechanoresponsive materials. We review here the effect of topology on the mechanical degradation of polymer chains and the activation of mechanophores in polymer backbones. The chapter focuses on both experimental and theoretical work carried out in the past 70 years. After a general introduction (Sect. 1), where the concept, the history, and the application of polymer mechanochemistry are briefly described, flow fields to study polymer mechanochemistry are discussed (Sect. 2), results of mechanochemistry study are presented for linear polymers (Sect. 3), cyclic polymers (Sect. 4), graft polymers (Sect. 5), star-shaped polymers (Sect. 6), hyperbranched polymers and dendrimers (Sect. 7), and systems with dynamic topology (Sect. 8). Here we focus on (1) experimental results involving the topological effect on the coil-to-stretch transition and the fracture of the polymer chains, (2) the underlying mechanisms and the key factor that determines the mechanical stability of the macromolecules, (3) theoretical models that relate to the experimental observations, and (4) rational design of mechanophores in complex topology to achieve multiple activations according to the existing results observed in chain degradation.

Alkyne mechanochemistry: putative activation by transoidal bending

Mechanochemical transoidal bending of triple bonds lead to an unexpected reaction between alkynes and azide traps.